diff options
| -rw-r--r-- | Documentation/DocBook/libata.tmpl | 49 | ||||
| -rw-r--r-- | drivers/ata/pata_pcmcia.c | 4 | ||||
| -rw-r--r-- | drivers/ide/ide-cs.c | 4 |
3 files changed, 20 insertions, 37 deletions
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index ba9975771503..ff3e5bec1c24 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *); issue of SET FEATURES - XFER MODE, and prior to operation. </para> <para> - Called by ata_device_add() after ata_dev_identify() determines - a device is present. - </para> - <para> This entry may be specified as NULL in ata_port_operations. </para> @@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in <sect2><title>Taskfile read/write</title> <programlisting> -void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); -void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf); </programlisting> <para> @@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); hardware registers / DMA buffers, to obtain the current set of taskfile register values. Most drivers for taskfile-based hardware (PIO or MMIO) use - ata_tf_load() and ata_tf_read() for these hooks. + ata_sff_tf_load() and ata_sff_tf_read() for these hooks. </para> </sect2> <sect2><title>PIO data read/write</title> <programlisting> -void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); +void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); </programlisting> <para> All bmdma-style drivers must implement this hook. This is the low-level operation that actually copies the data bytes during a PIO data transfer. -Typically the driver -will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or -ata_mmio_data_xfer(). +Typically the driver will choose one of ata_sff_data_xfer_noirq(), +ata_sff_data_xfer(), or ata_sff_data_xfer32(). </para> </sect2> <sect2><title>ATA command execute</title> <programlisting> -void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf); </programlisting> <para> causes an ATA command, previously loaded with ->tf_load(), to be initiated in hardware. - Most drivers for taskfile-based hardware use ata_exec_command() + Most drivers for taskfile-based hardware use ata_sff_exec_command() for this hook. </para> @@ -218,8 +213,8 @@ command. <sect2><title>Read specific ATA shadow registers</title> <programlisting> -u8 (*check_status)(struct ata_port *ap); -u8 (*check_altstatus)(struct ata_port *ap); +u8 (*sff_check_status)(struct ata_port *ap); +u8 (*sff_check_altstatus)(struct ata_port *ap); </programlisting> <para> @@ -227,20 +222,14 @@ u8 (*check_altstatus)(struct ata_port *ap); hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. Most drivers for taskfile-based hardware use - ata_check_status() for this hook. - </para> - <para> - Note that because this is called from ata_device_add(), at - least a dummy function that clears device interrupts must be - provided for all drivers, even if the controller doesn't - actually have a taskfile status register. + ata_sff_check_status() for this hook. </para> </sect2> <sect2><title>Select ATA device on bus</title> <programlisting> -void (*dev_select)(struct ata_port *ap, unsigned int device); +void (*sff_dev_select)(struct ata_port *ap, unsigned int device); </programlisting> <para> @@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); </para> <para> Most drivers for taskfile-based hardware use - ata_std_dev_select() for this hook. Controllers which do not - support second drives on a port (such as SATA contollers) will - use ata_noop_dev_select(). + ata_sff_dev_select() for this hook. </para> </sect2> @@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *); to struct ata_host_set. </para> <para> - Most legacy IDE drivers use ata_interrupt() for the + Most legacy IDE drivers use ata_sff_interrupt() for the irq_handler hook, which scans all ports in the host_set, determines which queued command was active (if any), and calls - ata_host_intr(ap,qc). + ata_sff_host_intr(ap,qc). </para> <para> - Most legacy IDE drivers use ata_bmdma_irq_clear() for the + Most legacy IDE drivers use ata_sff_irq_clear() for the irq_clear() hook, which simply clears the interrupt and error flags in the DMA status register. </para> @@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set); data from port at this time. </para> <para> - Many drivers use ata_port_stop() as this hook, which frees the - PRD table. - </para> - <para> ->host_stop() is called after all ->port_stop() calls have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 4164dd244dd0..d94b8f0bd743 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -424,7 +424,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), - PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), @@ -446,7 +446,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), - PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index defce2877eef..b85450865ff0 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -409,7 +409,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), - PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), @@ -431,7 +431,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), - PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), |