diff options
| -rw-r--r-- | drivers/pwm/core.c | 21 | ||||
| -rw-r--r-- | drivers/pwm/pwm-clps711x.c | 2 | ||||
| -rw-r--r-- | drivers/pwm/pwm-pxa.c | 2 | ||||
| -rw-r--r-- | include/linux/pwm.h | 33 |
4 files changed, 49 insertions, 9 deletions
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 7831bc6b51dd..680fbc795a0a 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -128,6 +128,13 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label) set_bit(PWMF_REQUESTED, &pwm->flags); pwm->label = label; + /* + * FIXME: This should be removed once all PWM users properly make use + * of struct pwm_args to initialize the PWM device. As long as this is + * here, the PWM state and hardware state can get out of sync. + */ + pwm_apply_args(pwm); + return 0; } @@ -146,12 +153,12 @@ of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args) if (IS_ERR(pwm)) return pwm; - pwm_set_period(pwm, args->args[1]); + pwm->args.period = args->args[1]; if (args->args[2] & PWM_POLARITY_INVERTED) - pwm_set_polarity(pwm, PWM_POLARITY_INVERSED); + pwm->args.polarity = PWM_POLARITY_INVERSED; else - pwm_set_polarity(pwm, PWM_POLARITY_NORMAL); + pwm->args.polarity = PWM_POLARITY_NORMAL; return pwm; } @@ -172,7 +179,7 @@ of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args) if (IS_ERR(pwm)) return pwm; - pwm_set_period(pwm, args->args[1]); + pwm->args.period = args->args[1]; return pwm; } @@ -747,13 +754,13 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id) if (!chip) goto out; + pwm->args.period = chosen->period; + pwm->args.polarity = chosen->polarity; + pwm = pwm_request_from_chip(chip, chosen->index, con_id ?: dev_id); if (IS_ERR(pwm)) goto out; - pwm_set_period(pwm, chosen->period); - pwm_set_polarity(pwm, chosen->polarity); - out: mutex_unlock(&pwm_lookup_lock); return pwm; diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c index a80c10803636..7d335422cfda 100644 --- a/drivers/pwm/pwm-clps711x.c +++ b/drivers/pwm/pwm-clps711x.c @@ -60,7 +60,7 @@ static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) return -EINVAL; /* Store constant period value */ - pwm_set_period(pwm, DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq)); + pwm->args.period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq); return 0; } diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c index cb2f7024cf68..58b709f29130 100644 --- a/drivers/pwm/pwm-pxa.c +++ b/drivers/pwm/pwm-pxa.c @@ -160,7 +160,7 @@ pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args) if (IS_ERR(pwm)) return pwm; - pwm_set_period(pwm, args->args[0]); + pwm->args.period = args->args[0]; return pwm; } diff --git a/include/linux/pwm.h b/include/linux/pwm.h index cfc3ed46cad2..b78d27c42629 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -74,6 +74,24 @@ enum pwm_polarity { PWM_POLARITY_INVERSED, }; +/** + * struct pwm_args - board-dependent PWM arguments + * @period: reference period + * @polarity: reference polarity + * + * This structure describes board-dependent arguments attached to a PWM + * device. These arguments are usually retrieved from the PWM lookup table or + * device tree. + * + * Do not confuse this with the PWM state: PWM arguments represent the initial + * configuration that users want to use on this PWM device rather than the + * current PWM hardware state. + */ +struct pwm_args { + unsigned int period; + enum pwm_polarity polarity; +}; + enum { PWMF_REQUESTED = 1 << 0, PWMF_ENABLED = 1 << 1, @@ -92,6 +110,7 @@ enum { * @period: period of the PWM signal (in nanoseconds) * @duty_cycle: duty cycle of the PWM signal (in nanoseconds) * @polarity: polarity of the PWM signal + * @args: PWM arguments */ struct pwm_device { const char *label; @@ -105,6 +124,8 @@ struct pwm_device { unsigned int period; unsigned int duty_cycle; enum pwm_polarity polarity; + + struct pwm_args args; }; static inline bool pwm_is_enabled(const struct pwm_device *pwm) @@ -144,6 +165,18 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm) return pwm ? pwm->polarity : PWM_POLARITY_NORMAL; } +static inline void pwm_get_args(const struct pwm_device *pwm, + struct pwm_args *args) +{ + *args = pwm->args; +} + +static inline void pwm_apply_args(struct pwm_device *pwm) +{ + pwm_set_period(pwm, pwm->args.period); + pwm_set_polarity(pwm, pwm->args.polarity); +} + /** * struct pwm_ops - PWM controller operations * @request: optional hook for requesting a PWM |