diff options
| -rw-r--r-- | Documentation/DocBook/uio-howto.tmpl | 163 | ||||
| -rw-r--r-- | MAINTAINERS | 7 | ||||
| -rw-r--r-- | drivers/uio/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/uio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/uio/uio_pci_generic.c | 207 | ||||
| -rw-r--r-- | include/linux/pci_regs.h | 1 |
6 files changed, 389 insertions, 0 deletions
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 8f6e3b2403c7..4d4ce0e61e42 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -25,6 +25,10 @@ <year>2006-2008</year> <holder>Hans-Jürgen Koch.</holder> </copyright> +<copyright> + <year>2009</year> + <holder>Red Hat Inc, Michael S. Tsirkin (mst@redhat.com)</holder> +</copyright> <legalnotice> <para> @@ -42,6 +46,13 @@ GPL version 2. <revhistory> <revision> + <revnumber>0.9</revnumber> + <date>2009-07-16</date> + <authorinitials>mst</authorinitials> + <revremark>Added generic pci driver + </revremark> + </revision> + <revision> <revnumber>0.8</revnumber> <date>2008-12-24</date> <authorinitials>hjk</authorinitials> @@ -809,6 +820,158 @@ framework to set up sysfs files for this region. Simply leave it alone. </chapter> +<chapter id="uio_pci_generic" xreflabel="Using Generic driver for PCI cards"> +<?dbhtml filename="uio_pci_generic.html"?> +<title>Generic PCI UIO driver</title> + <para> + The generic driver is a kernel module named uio_pci_generic. + It can work with any device compliant to PCI 2.3 (circa 2002) and + any compliant PCI Express device. Using this, you only need to + write the userspace driver, removing the need to write + a hardware-specific kernel module. + </para> + +<sect1 id="uio_pci_generic_binding"> +<title>Making the driver recognize the device</title> + <para> +Since the driver does not declare any device ids, it will not get loaded +automatically and will not automatically bind to any devices, you must load it +and allocate id to the driver yourself. For example: + <programlisting> + modprobe uio_pci_generic + echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id + </programlisting> + </para> + <para> +If there already is a hardware specific kernel driver for your device, the +generic driver still won't bind to it, in this case if you want to use the +generic driver (why would you?) you'll have to manually unbind the hardware +specific driver and bind the generic driver, like this: + <programlisting> + echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind + echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind + </programlisting> + </para> + <para> +You can verify that the device has been bound to the driver +by looking for it in sysfs, for example like the following: + <programlisting> + ls -l /sys/bus/pci/devices/0000:00:19.0/driver + </programlisting> +Which if successful should print + <programlisting> + .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic + </programlisting> +Note that the generic driver will not bind to old PCI 2.2 devices. +If binding the device failed, run the following command: + <programlisting> + dmesg + </programlisting> +and look in the output for failure reasons + </para> +</sect1> + +<sect1 id="uio_pci_generic_internals"> +<title>Things to know about uio_pci_generic</title> + <para> +Interrupts are handled using the Interrupt Disable bit in the PCI command +register and Interrupt Status bit in the PCI status register. All devices +compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should +support these bits. uio_pci_generic detects this support, and won't bind to +devices which do not support the Interrupt Disable Bit in the command register. + </para> + <para> +On each interrupt, uio_pci_generic sets the Interrupt Disable bit. +This prevents the device from generating further interrupts +until the bit is cleared. The userspace driver should clear this +bit before blocking and waiting for more interrupts. + </para> +</sect1> +<sect1 id="uio_pci_generic_userspace"> +<title>Writing userspace driver using uio_pci_generic</title> + <para> +Userspace driver can use pci sysfs interface, or the +libpci libray that wraps it, to talk to the device and to +re-enable interrupts by writing to the command register. + </para> +</sect1> +<sect1 id="uio_pci_generic_example"> +<title>Example code using uio_pci_generic</title> + <para> +Here is some sample userspace driver code using uio_pci_generic: +<programlisting> +#include <stdlib.h> +#include <stdio.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> + +int main() +{ + int uiofd; + int configfd; + int err; + int i; + unsigned icount; + unsigned char command_high; + + uiofd = open("/dev/uio0", O_RDONLY); + if (uiofd < 0) { + perror("uio open:"); + return errno; + } + configfd = open("/sys/class/uio/uio0/device/config", O_RDWR); + if (uiofd < 0) { + perror("config open:"); + return errno; + } + + /* Read and cache command value */ + err = pread(configfd, &command_high, 1, 5); + if (err != 1) { + perror("command config read:"); + return errno; + } + command_high &= ~0x4; + + for(i = 0;; ++i) { + /* Print out a message, for debugging. */ + if (i == 0) + fprintf(stderr, "Started uio test driver.\n"); + else + fprintf(stderr, "Interrupts: %d\n", icount); + + /****************************************/ + /* Here we got an interrupt from the + device. Do something to it. */ + /****************************************/ + + /* Re-enable interrupts. */ + err = pwrite(configfd, &command_high, 1, 5); + if (err != 1) { + perror("config write:"); + break; + } + + /* Wait for next interrupt. */ + err = read(uiofd, &icount, 4); + if (err != 4) { + perror("uio read:"); + break; + } + + } + return errno; +} + +</programlisting> + </para> +</sect1> + +</chapter> + <appendix id="app1"> <title>Further information</title> <itemizedlist> diff --git a/MAINTAINERS b/MAINTAINERS index 837b5985ac40..01193a4fe30e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2218,6 +2218,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git S: Maintained F: include/asm-generic +GENERIC UIO DRIVER FOR PCI DEVICES +M: Michael S. Tsirkin <mst@redhat.com> +L: kvm@vger.kernel.org +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/uio/uio_pci_generic.c + GFS2 FILE SYSTEM M: Steven Whitehouse <swhiteho@redhat.com> L: cluster-devel@redhat.com diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 45200fd68534..8aa1955f35ed 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -84,4 +84,14 @@ config UIO_SERCOS3 If you compile this as a module, it will be called uio_sercos3. +config UIO_PCI_GENERIC + tristate "Generic driver for PCI 2.3 and PCI Express cards" + depends on PCI + default n + help + Generic driver that you can bind, dynamically, to any + PCI 2.3 compliant and PCI Express card. It is useful, + primarily, for virtualization scenarios. + If you compile this as a module, it will be called uio_pci_generic. + endif diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile index 5c2586d75797..73b2e7516729 100644 --- a/drivers/uio/Makefile +++ b/drivers/uio/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o obj-$(CONFIG_UIO_SMX) += uio_smx.o obj-$(CONFIG_UIO_AEC) += uio_aec.o obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o +obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c new file mode 100644 index 000000000000..313da35984af --- /dev/null +++ b/drivers/uio/uio_pci_generic.c @@ -0,0 +1,207 @@ +/* uio_pci_generic - generic UIO driver for PCI 2.3 devices + * + * Copyright (C) 2009 Red Hat, Inc. + * Author: Michael S. Tsirkin <mst@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. + * + * Since the driver does not declare any device ids, you must allocate + * id and bind the device to the driver yourself. For example: + * + * # echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind + * # ls -l /sys/bus/pci/devices/0000:00:19.0/driver + * .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic + * + * Driver won't bind to devices which do not support the Interrupt Disable Bit + * in the command register. All devices compliant to PCI 2.3 (circa 2002) and + * all compliant PCI Express devices should support this bit. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/uio_driver.h> +#include <linux/spinlock.h> + +#define DRIVER_VERSION "0.01.0" +#define DRIVER_AUTHOR "Michael S. Tsirkin <mst@redhat.com>" +#define DRIVER_DESC "Generic UIO driver for PCI 2.3 devices" + +struct uio_pci_generic_dev { + struct uio_info info; + struct pci_dev *pdev; + spinlock_t lock; /* guards command register accesses */ +}; + +static inline struct uio_pci_generic_dev * +to_uio_pci_generic_dev(struct uio_info *info) +{ + return container_of(info, struct uio_pci_generic_dev, info); +} + +/* Interrupt handler. Read/modify/write the command register to disable + * the interrupt. */ +static irqreturn_t irqhandler(int irq, struct uio_info *info) +{ + struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info); + struct pci_dev *pdev = gdev->pdev; + irqreturn_t ret = IRQ_NONE; + u32 cmd_status_dword; + u16 origcmd, newcmd, status; + + /* We do a single dword read to retrieve both command and status. + * Document assumptions that make this possible. */ + BUILD_BUG_ON(PCI_COMMAND % 4); + BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS); + + spin_lock_irq(&gdev->lock); + pci_block_user_cfg_access(pdev); + + /* Read both command and status registers in a single 32-bit operation. + * Note: we could cache the value for command and move the status read + * out of the lock if there was a way to get notified of user changes + * to command register through sysfs. Should be good for shared irqs. */ + pci_read_config_dword(pdev, PCI_COMMAND, &cmd_status_dword); + origcmd = cmd_status_dword; + status = cmd_status_dword >> 16; + + /* Check interrupt status register to see whether our device + * triggered the interrupt. */ + if (!(status & PCI_STATUS_INTERRUPT)) + goto done; + + /* We triggered the interrupt, disable it. */ + newcmd = origcmd | PCI_COMMAND_INTX_DISABLE; + if (newcmd != origcmd) + pci_write_config_word(pdev, PCI_COMMAND, newcmd); + + /* UIO core will signal the user process. */ + ret = IRQ_HANDLED; +done: + + pci_unblock_user_cfg_access(pdev); + spin_unlock_irq(&gdev->lock); + return ret; +} + +/* Verify that the device supports Interrupt Disable bit in command register, + * per PCI 2.3, by flipping this bit and reading it back: this bit was readonly + * in PCI 2.2. */ +static int __devinit verify_pci_2_3(struct pci_dev *pdev) +{ + u16 orig, new; + int err = 0; + + pci_block_user_cfg_access(pdev); + pci_read_config_word(pdev, PCI_COMMAND, &orig); + pci_write_config_word(pdev, PCI_COMMAND, + orig ^ PCI_COMMAND_INTX_DISABLE); + pci_read_config_word(pdev, PCI_COMMAND, &new); + /* There's no way to protect against + * hardware bugs or detect them reliably, but as long as we know + * what the value should be, let's go ahead and check it. */ + if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) { + err = -EBUSY; + dev_err(&pdev->dev, "Command changed from 0x%x to 0x%x: " + "driver or HW bug?\n", orig, new); + goto err; + } + if (!((new ^ orig) & PCI_COMMAND_INTX_DISABLE)) { + dev_warn(&pdev->dev, "Device does not support " + "disabling interrupts: unable to bind.\n"); + err = -ENODEV; + goto err; + } + /* Now restore the original value. */ + pci_write_config_word(pdev, PCI_COMMAND, orig); +err: + pci_unblock_user_cfg_access(pdev); + return err; +} + +static int __devinit probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct uio_pci_generic_dev *gdev; + int err; + + if (!pdev->irq) { + dev_warn(&pdev->dev, "No IRQ assigned to device: " + "no support for interrupts?\n"); + return -ENODEV; + } + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "%s: pci_enable_device failed: %d\n", + __func__, err); + return err; + } + + err = verify_pci_2_3(pdev); + if (err) + goto err_verify; + + gdev = kzalloc(sizeof(struct uio_pci_generic_dev), GFP_KERNEL); + if (!gdev) { + err = -ENOMEM; + goto err_alloc; + } + + gdev->info.name = "uio_pci_generic"; + gdev->info.version = DRIVER_VERSION; + gdev->info.irq = pdev->irq; + gdev->info.irq_flags = IRQF_SHARED; + gdev->info.handler = irqhandler; + gdev->pdev = pdev; + spin_lock_init(&gdev->lock); + + if (uio_register_device(&pdev->dev, &gdev->info)) + goto err_register; + pci_set_drvdata(pdev, gdev); + + return 0; +err_register: + kfree(gdev); +err_alloc: +err_verify: + pci_disable_device(pdev); + return err; +} + +static void remove(struct pci_dev *pdev) +{ + struct uio_pci_generic_dev *gdev = pci_get_drvdata(pdev); + + uio_unregister_device(&gdev->info); + pci_disable_device(pdev); + kfree(gdev); +} + +static struct pci_driver driver = { + .name = "uio_pci_generic", + .id_table = NULL, /* only dynamic id's */ + .probe = probe, + .remove = remove, +}; + +static int __init init(void) +{ + pr_info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); + return pci_register_driver(&driver); +} + +static void __exit cleanup(void) +{ + pci_unregister_driver(&driver); +} + +module_init(init); +module_exit(cleanup); + +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index fcaee42c7ac2..dd0bed4f1cf0 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -42,6 +42,7 @@ #define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ #define PCI_STATUS 0x06 /* 16 bits */ +#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ #define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ #define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ |