diff options
27 files changed, 2038 insertions, 398 deletions
diff --git a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt new file mode 100644 index 000000000000..2e1c06fad81f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt @@ -0,0 +1,44 @@ +* ST-Ericsson DB8500 Thermal + +** Thermal node properties: + +- compatible : "stericsson,db8500-thermal"; +- reg : address range of the thermal sensor registers; +- interrupts : interrupts generated from PRCMU; +- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH"; +- num-trips : number of total trip points, this is required, set it 0 if none, + if greater than 0, the following properties must be defined; +- tripN-temp : temperature of trip point N, should be in ascending order; +- tripN-type : type of trip point N, should be one of "active" "passive" "hot" + "critical"; +- tripN-cdev-num : number of the cooling devices which can be bound to trip + point N, this is required if trip point N is defined, set it 0 if none, + otherwise the following cooling device names must be defined; +- tripN-cdev-nameM : name of the No. M cooling device of trip point N; + +Usually the num-trips and tripN-*** are separated in board related dts files. + +Example: +thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupts = <21 0x4>, <22 0x4>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + + num-trips = <3>; + + trip0-temp = <75000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <80000>; + trip1-type = "active"; + trip1-cdev-num = <2>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + trip1-cdev-name1 = "thermal-fan"; + + trip2-temp = <85000>; + trip2-type = "critical"; + trip2-cdev-num = <0>; +} diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index ca1a1a34970e..88c02334e356 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -112,6 +112,29 @@ temperature) and throttle appropriate devices. trip: indicates which trip point the cooling devices is associated with in this thermal zone. +1.4 Thermal Zone Parameters +1.4.1 struct thermal_bind_params + This structure defines the following parameters that are used to bind + a zone with a cooling device for a particular trip point. + .cdev: The cooling device pointer + .weight: The 'influence' of a particular cooling device on this zone. + This is on a percentage scale. The sum of all these weights + (for a particular zone) cannot exceed 100. + .trip_mask:This is a bit mask that gives the binding relation between + this thermal zone and cdev, for a particular trip point. + If nth bit is set, then the cdev and thermal zone are bound + for trip point n. + .match: This call back returns success(0) if the 'tz and cdev' need to + be bound, as per platform data. +1.4.2 struct thermal_zone_params + This structure defines the platform level parameters for a thermal zone. + This data, for each thermal zone should come from the platform layer. + This is an optional feature where some platforms can choose not to + provide this data. + .governor_name: Name of the thermal governor used for this zone + .num_tbps: Number of thermal_bind_params entries for this zone + .tbp: thermal_bind_params entries + 2. sysfs attributes structure RO read only value @@ -126,6 +149,7 @@ Thermal zone device sys I/F, created once it's registered: |---type: Type of the thermal zone |---temp: Current temperature |---mode: Working mode of the thermal zone + |---policy: Thermal governor used for this zone |---trip_point_[0-*]_temp: Trip point temperature |---trip_point_[0-*]_type: Trip point type |---trip_point_[0-*]_hyst: Hysteresis value for this trip point @@ -187,6 +211,10 @@ mode charge of the thermal management. RW, Optional +policy + One of the various thermal governors used for a particular zone. + RW, Required + trip_point_[0-*]_temp The temperature above which trip point will be fired. Unit: millidegree Celsius @@ -264,6 +292,7 @@ method, the sys I/F structure will be built like this: |---type: acpitz |---temp: 37000 |---mode: enabled + |---policy: step_wise |---trip_point_0_temp: 100000 |---trip_point_0_type: critical |---trip_point_1_temp: 80000 @@ -305,3 +334,38 @@ to a thermal_zone_device when it registers itself with the framework. The event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL, THERMAL_DEV_FAULT}. Notification can be sent when the current temperature crosses any of the configured thresholds. + +5. Export Symbol APIs: + +5.1: get_tz_trend: +This function returns the trend of a thermal zone, i.e the rate of change +of temperature of the thermal zone. Ideally, the thermal sensor drivers +are supposed to implement the callback. If they don't, the thermal +framework calculated the trend by comparing the previous and the current +temperature values. + +5.2:get_thermal_instance: +This function returns the thermal_instance corresponding to a given +{thermal_zone, cooling_device, trip_point} combination. Returns NULL +if such an instance does not exist. + +5.3:notify_thermal_framework: +This function handles the trip events from sensor drivers. It starts +throttling the cooling devices according to the policy configured. +For CRITICAL and HOT trip points, this notifies the respective drivers, +and does actual throttling for other trip points i.e ACTIVE and PASSIVE. +The throttling policy is based on the configured platform data; if no +platform data is provided, this uses the step_wise throttling policy. + +5.4:thermal_cdev_update: +This function serves as an arbitrator to set the state of a cooling +device. It sets the cooling device to the deepest cooling state if +possible. + +5.5:thermal_register_governor: +This function lets the various thermal governors to register themselves +with the Thermal framework. At run time, depending on a zone's platform +data, a particular governor is used for throttling. + +5.6:thermal_unregister_governor: +This function unregisters a governor from the thermal framework. diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 4b0e0ca08f40..731086b2fca2 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -203,6 +203,14 @@ reg = <0x80157450 0xC>; }; + thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupts = <21 0x4>, <22 0x4>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + status = "disabled"; + }; + db8500-prcmu-regulators { compatible = "stericsson,db8500-prcmu-regulator"; @@ -660,5 +668,11 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + cpufreq-cooling { + compatible = "stericsson,db8500-cpufreq-cooling"; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 702c0baa6004..c6f85f0bc531 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -99,6 +99,33 @@ status = "okay"; }; + prcmu@80157000 { + thermal@801573c0 { + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; + + status = "okay"; + }; + }; + external-bus@50000000 { status = "okay"; @@ -183,5 +210,9 @@ reg = <0x33>; }; }; + + cpufreq-cooling { + status = "okay"; + }; }; }; diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index da6845493caa..250625d5223f 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -69,6 +69,8 @@ CONFIG_GPIO_TC3589X=y CONFIG_POWER_SUPPLY=y CONFIG_AB8500_BM=y CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 0a3dd601a400..2d16b1dd5fec 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-nomadik.h> +#include <linux/platform_data/db8500_thermal.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -229,6 +230,67 @@ static struct ab8500_platform_data ab8500_platdata = { }; /* + * Thermal Sensor + */ + +static struct resource db8500_thsens_resources[] = { + { + .name = "IRQ_HOTMON_LOW", + .start = IRQ_PRCMU_HOTMON_LOW, + .end = IRQ_PRCMU_HOTMON_LOW, + .flags = IORESOURCE_IRQ, + }, + { + .name = "IRQ_HOTMON_HIGH", + .start = IRQ_PRCMU_HOTMON_HIGH, + .end = IRQ_PRCMU_HOTMON_HIGH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct db8500_thsens_platform_data db8500_thsens_data = { + .trip_points[0] = { + .temp = 70000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[1] = { + .temp = 75000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[2] = { + .temp = 80000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[3] = { + .temp = 85000, + .type = THERMAL_TRIP_CRITICAL, + }, + .num_trips = 4, +}; + +static struct platform_device u8500_thsens_device = { + .name = "db8500-thermal", + .resource = db8500_thsens_resources, + .num_resources = ARRAY_SIZE(db8500_thsens_resources), + .dev = { + .platform_data = &db8500_thsens_data, + }, +}; + +static struct platform_device u8500_cpufreq_cooling_device = { + .name = "db8500-cpufreq-cooling", +}; + +/* * TPS61052 */ @@ -583,6 +645,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, + &u8500_thsens_device, + &u8500_cpufreq_cooling_device, }; static void __init mop500_init_machine(void) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 6e8cc16b54c1..506fbd4b5733 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -900,14 +900,14 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) if (tz->trips.passive.flags.valid) tz->thermal_zone = thermal_zone_device_register("acpitz", trips, 0, tz, - &acpi_thermal_zone_ops, + &acpi_thermal_zone_ops, NULL, tz->trips.passive.tsp*100, tz->polling_frequency*100); else tz->thermal_zone = thermal_zone_device_register("acpitz", trips, 0, tz, - &acpi_thermal_zone_ops, 0, - tz->polling_frequency*100); + &acpi_thermal_zone_ops, NULL, + 0, tz->polling_frequency*100); if (IS_ERR(tz->thermal_zone)) return -ENODEV; diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 84c56881ba80..c2e3e63d2c15 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -662,7 +662,7 @@ static int acerhdf_register_thermal(void) return -EINVAL; thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL, - &acerhdf_dev_ops, 0, + &acerhdf_dev_ops, NULL, 0, (kernelmode) ? interval*1000 : 0); if (IS_ERR(thz_dev)) return -EINVAL; diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index c8097616dd62..93de09019d1d 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -502,7 +502,7 @@ static int mid_thermal_probe(struct platform_device *pdev) goto err; } pinfo->tzd[i] = thermal_zone_device_register(name[i], - 0, 0, td_info, &tzd_ops, 0, 0); + 0, 0, td_info, &tzd_ops, NULL, 0, 0); if (IS_ERR(pinfo->tzd[i])) { kfree(td_info); ret = PTR_ERR(pinfo->tzd[i]); diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 2436f1350013..f77a41272e5d 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -201,7 +201,7 @@ static int psy_register_thermal(struct power_supply *psy) for (i = 0; i < psy->num_properties; i++) { if (psy->properties[i] == POWER_SUPPLY_PROP_TEMP) { psy->tzd = thermal_zone_device_register(psy->name, 0, 0, - psy, &psy_tzd_ops, 0, 0); + psy, &psy_tzd_ops, NULL, 0, 0); if (IS_ERR(psy->tzd)) return PTR_ERR(psy->tzd); break; diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/omap-thermal/omap-thermal-common.c index 15e9723ba4d6..61f1070c6667 100644 --- a/drivers/staging/omap-thermal/omap-thermal-common.c +++ b/drivers/staging/omap-thermal/omap-thermal-common.c @@ -270,7 +270,7 @@ int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id, /* Create thermal zone */ data->omap_thermal = thermal_zone_device_register(domain, OMAP_TRIP_NUMBER, 0, data, &omap_thermal_ops, - FAST_TEMP_MONITORING_RATE, + NULL, FAST_TEMP_MONITORING_RATE, FAST_TEMP_MONITORING_RATE); if (IS_ERR_OR_NULL(data->omap_thermal)) { dev_err(bg_ptr->dev, "thermal zone device is NULL\n"); diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index e1cb6bd75f60..8636fae1f7ec 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -13,15 +13,62 @@ menuconfig THERMAL All platforms with ACPI thermal support can use this driver. If you want this support, you should say Y or M here. +if THERMAL + config THERMAL_HWMON bool - depends on THERMAL depends on HWMON=y || HWMON=THERMAL default y +choice + prompt "Default Thermal governor" + default THERMAL_DEFAULT_GOV_STEP_WISE + help + This option sets which thermal governor shall be loaded at + startup. If in doubt, select 'step_wise'. + +config THERMAL_DEFAULT_GOV_STEP_WISE + bool "step_wise" + select STEP_WISE + help + Use the step_wise governor as default. This throttles the + devices one step at a time. + +config THERMAL_DEFAULT_GOV_FAIR_SHARE + bool "fair_share" + select FAIR_SHARE + help + Use the fair_share governor as default. This throttles the + devices based on their 'contribution' to a zone. The + contribution should be provided through platform data. + +config THERMAL_DEFAULT_GOV_USER_SPACE + bool "user_space" + select USER_SPACE + help + Select this if you want to let the user space manage the + lpatform thermals. + +endchoice + +config FAIR_SHARE + bool "Fair-share thermal governor" + help + Enable this to manage platform thermals using fair-share governor. + +config STEP_WISE + bool "Step_wise thermal governor" + help + Enable this to manage platform thermals using a simple linear + +config USER_SPACE + bool "User_space thermal governor" + help + Enable this to let the user space manage the platform thermals. + config CPU_THERMAL - bool "generic cpu cooling support" - depends on THERMAL && CPU_FREQ + tristate "generic cpu cooling support" + depends on CPU_FREQ select CPU_FREQ_TABLE help This implements the generic cpu cooling mechanism through frequency @@ -33,7 +80,6 @@ config CPU_THERMAL config SPEAR_THERMAL bool "SPEAr thermal sensor driver" - depends on THERMAL depends on PLAT_SPEAR depends on OF help @@ -42,7 +88,6 @@ config SPEAR_THERMAL config RCAR_THERMAL tristate "Renesas R-Car thermal driver" - depends on THERMAL depends on ARCH_SHMOBILE help Enable this to plug the R-Car thermal sensor driver into the Linux @@ -50,8 +95,31 @@ config RCAR_THERMAL config EXYNOS_THERMAL tristate "Temperature sensor on Samsung EXYNOS" - depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL - select CPU_FREQ_TABLE + depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) + depends on CPU_THERMAL help If you say yes here you get support for TMU (Thermal Managment Unit) on SAMSUNG EXYNOS series of SoC. + +config DB8500_THERMAL + bool "DB8500 thermal management" + depends on ARCH_U8500 + default y + help + Adds DB8500 thermal management implementation according to the thermal + management framework. A thermal zone with several trip points will be + created. Cooling devices can be bound to the trip points to cool this + thermal zone if trip points reached. + +config DB8500_CPUFREQ_COOLING + tristate "DB8500 cpufreq cooling" + depends on ARCH_U8500 + depends on CPU_THERMAL + default y + help + Adds DB8500 cpufreq cooling devices, and these cooling devices can be + bound to thermal zone trip points. When a trip point reached, the + bound cpufreq cooling device turns active to set CPU frequency low to + cool down the CPU. + +endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 885550dc64b7..d8da683245fc 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,7 +3,18 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o -obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o -obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o + +# governors +obj-$(CONFIG_FAIR_SHARE) += fair_share.o +obj-$(CONFIG_STEP_WISE) += step_wise.o +obj-$(CONFIG_USER_SPACE) += user_space.o + +# cpufreq cooling +obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o + +# platform thermal drivers +obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o -obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o +obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o +obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o +obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index cc1c930a90e4..836828e29a87 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -58,12 +58,13 @@ struct cpufreq_cooling_device { }; static LIST_HEAD(cooling_cpufreq_list); static DEFINE_IDR(cpufreq_idr); +static DEFINE_MUTEX(cooling_cpufreq_lock); -static struct mutex cooling_cpufreq_lock; +static unsigned int cpufreq_dev_count; /* notify_table passes value to the CPUFREQ_ADJUST callback function. */ #define NOTIFY_INVALID NULL -struct cpufreq_cooling_device *notify_device; +static struct cpufreq_cooling_device *notify_device; /** * get_idr - function to get a unique id. @@ -240,42 +241,32 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, static int cpufreq_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) { - int ret = -EINVAL, i = 0; - struct cpufreq_cooling_device *cpufreq_device; - struct cpumask *maskPtr; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + struct cpumask *maskPtr = &cpufreq_device->allowed_cpus; unsigned int cpu; struct cpufreq_frequency_table *table; + unsigned long count = 0; + int i = 0; - mutex_lock(&cooling_cpufreq_lock); - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) { - if (cpufreq_device && cpufreq_device->cool_dev == cdev) - break; - } - if (cpufreq_device == NULL) - goto return_get_max_state; - - maskPtr = &cpufreq_device->allowed_cpus; cpu = cpumask_any(maskPtr); table = cpufreq_frequency_get_table(cpu); if (!table) { *state = 0; - ret = 0; - goto return_get_max_state; + return 0; } - while (table[i].frequency != CPUFREQ_TABLE_END) { + for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { if (table[i].frequency == CPUFREQ_ENTRY_INVALID) continue; - i++; + count++; } - if (i > 0) { - *state = --i; - ret = 0; + + if (count > 0) { + *state = --count; + return 0; } -return_get_max_state: - mutex_unlock(&cooling_cpufreq_lock); - return ret; + return -EINVAL; } /** @@ -286,20 +277,10 @@ return_get_max_state: static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state) { - int ret = -EINVAL; - struct cpufreq_cooling_device *cpufreq_device; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; - mutex_lock(&cooling_cpufreq_lock); - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) { - if (cpufreq_device && cpufreq_device->cool_dev == cdev) { - *state = cpufreq_device->cpufreq_state; - ret = 0; - break; - } - } - mutex_unlock(&cooling_cpufreq_lock); - - return ret; + *state = cpufreq_device->cpufreq_state; + return 0; } /** @@ -310,22 +291,9 @@ static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev, static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) { - int ret = -EINVAL; - struct cpufreq_cooling_device *cpufreq_device; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; - mutex_lock(&cooling_cpufreq_lock); - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) { - if (cpufreq_device && cpufreq_device->cool_dev == cdev) { - ret = 0; - break; - } - } - if (!ret) - ret = cpufreq_apply_cooling(cpufreq_device, state); - - mutex_unlock(&cooling_cpufreq_lock); - - return ret; + return cpufreq_apply_cooling(cpufreq_device, state); } /* Bind cpufreq callbacks to thermal cooling device ops */ @@ -345,18 +313,15 @@ static struct notifier_block thermal_cpufreq_notifier_block = { * @clip_cpus: cpumask of cpus where the frequency constraints will happen. */ struct thermal_cooling_device *cpufreq_cooling_register( - struct cpumask *clip_cpus) + const struct cpumask *clip_cpus) { struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev = NULL; - unsigned int cpufreq_dev_count = 0, min = 0, max = 0; + unsigned int min = 0, max = 0; char dev_name[THERMAL_NAME_LENGTH]; int ret = 0, i; struct cpufreq_policy policy; - list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) - cpufreq_dev_count++; - /*Verify that all the clip cpus have same freq_min, freq_max limit*/ for_each_cpu(i, clip_cpus) { /*continue if cpufreq policy not found and not return error*/ @@ -369,7 +334,7 @@ struct thermal_cooling_device *cpufreq_cooling_register( if (min != policy.cpuinfo.min_freq || max != policy.cpuinfo.max_freq) return ERR_PTR(-EINVAL); -} + } } cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device), GFP_KERNEL); @@ -378,9 +343,6 @@ struct thermal_cooling_device *cpufreq_cooling_register( cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); - if (cpufreq_dev_count == 0) - mutex_init(&cooling_cpufreq_lock); - ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); if (ret) { kfree(cpufreq_dev); @@ -399,12 +361,12 @@ struct thermal_cooling_device *cpufreq_cooling_register( cpufreq_dev->cool_dev = cool_dev; cpufreq_dev->cpufreq_state = 0; mutex_lock(&cooling_cpufreq_lock); - list_add_tail(&cpufreq_dev->node, &cooling_cpufreq_list); /* Register the notifier for first cpufreq cooling device */ if (cpufreq_dev_count == 0) cpufreq_register_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); + cpufreq_dev_count++; mutex_unlock(&cooling_cpufreq_lock); return cool_dev; @@ -417,33 +379,20 @@ EXPORT_SYMBOL(cpufreq_cooling_register); */ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { - struct cpufreq_cooling_device *cpufreq_dev = NULL; - unsigned int cpufreq_dev_count = 0; + struct cpufreq_cooling_device *cpufreq_dev = cdev->devdata; mutex_lock(&cooling_cpufreq_lock); - list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) { - if (cpufreq_dev && cpufreq_dev->cool_dev == cdev) - break; - cpufreq_dev_count++; - } - - if (!cpufreq_dev || cpufreq_dev->cool_dev != cdev) { - mutex_unlock(&cooling_cpufreq_lock); - return; - } - - list_del(&cpufreq_dev->node); + cpufreq_dev_count--; /* Unregister the notifier for the last cpufreq cooling device */ - if (cpufreq_dev_count == 1) { + if (cpufreq_dev_count == 0) { cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); } mutex_unlock(&cooling_cpufreq_lock); + thermal_cooling_device_unregister(cpufreq_dev->cool_dev); release_idr(&cpufreq_idr, cpufreq_dev->id); - if (cpufreq_dev_count == 1) - mutex_destroy(&cooling_cpufreq_lock); kfree(cpufreq_dev); } EXPORT_SYMBOL(cpufreq_cooling_unregister); diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c new file mode 100644 index 000000000000..4cf8e72af90a --- /dev/null +++ b/drivers/thermal/db8500_cpufreq_cooling.c @@ -0,0 +1,108 @@ +/* + * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device. + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/cpu_cooling.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) +{ + struct thermal_cooling_device *cdev; + struct cpumask mask_val; + + /* make sure cpufreq driver has been initialized */ + if (!cpufreq_frequency_get_table(0)) + return -EPROBE_DEFER; + + cpumask_set_cpu(0, &mask_val); + cdev = cpufreq_cooling_register(&mask_val); + + if (IS_ERR_OR_NULL(cdev)) { + dev_err(&pdev->dev, "Failed to register cooling device\n"); + return PTR_ERR(cdev); + } + + platform_set_drvdata(pdev, cdev); + + dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev->type); + + return 0; +} + +static int db8500_cpufreq_cooling_remove(struct platform_device *pdev) +{ + struct thermal_cooling_device *cdev = platform_get_drvdata(pdev); + + cpufreq_cooling_unregister(cdev); + + return 0; +} + +static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev, + pm_message_t state) +{ + return -ENOSYS; +} + +static int db8500_cpufreq_cooling_resume(struct platform_device *pdev) +{ + return -ENOSYS; +} + +#ifdef CONFIG_OF +static const struct of_device_id db8500_cpufreq_cooling_match[] = { + { .compatible = "stericsson,db8500-cpufreq-cooling" }, + {}, +}; +#else +#define db8500_cpufreq_cooling_match NULL +#endif + +static struct platform_driver db8500_cpufreq_cooling_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "db8500-cpufreq-cooling", + .of_match_table = db8500_cpufreq_cooling_match, + }, + .probe = db8500_cpufreq_cooling_probe, + .suspend = db8500_cpufreq_cooling_suspend, + .resume = db8500_cpufreq_cooling_resume, + .remove = db8500_cpufreq_cooling_remove, +}; + +static int __init db8500_cpufreq_cooling_init(void) +{ + return platform_driver_register(&db8500_cpufreq_cooling_driver); +} + +static void __exit db8500_cpufreq_cooling_exit(void) +{ + platform_driver_unregister(&db8500_cpufreq_cooling_driver); +} + +/* Should be later than db8500_cpufreq_register */ +late_initcall(db8500_cpufreq_cooling_init); +module_exit(db8500_cpufreq_cooling_exit); + +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); +MODULE_DESCRIPTION("DB8500 cpufreq cooling driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c new file mode 100644 index 000000000000..ec71ade3e317 --- /dev/null +++ b/drivers/thermal/db8500_thermal.c @@ -0,0 +1,531 @@ +/* + * db8500_thermal.c - DB8500 Thermal Management Implementation + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/cpu_cooling.h> +#include <linux/interrupt.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_data/db8500_thermal.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +#define PRCMU_DEFAULT_MEASURE_TIME 0xFFF +#define PRCMU_DEFAULT_LOW_TEMP 0 + +struct db8500_thermal_zone { + struct thermal_zone_device *therm_dev; + struct mutex th_lock; + struct work_struct therm_work; + struct db8500_thsens_platform_data *trip_tab; + enum thermal_device_mode mode; + enum thermal_trend trend; + unsigned long cur_temp_pseudo; + unsigned int cur_index; +}; + +/* Local function to check if thermal zone matches cooling devices */ +static int db8500_thermal_match_cdev(struct thermal_cooling_device *cdev, + struct db8500_trip_point *trip_point) +{ + int i; + + if (!strlen(cdev->type)) + return -EINVAL; + + for (i = 0; i < COOLING_DEV_MAX; i++) { + if (!strcmp(trip_point->cdev_name[i], cdev->type)) + return 0; + } + + return -ENODEV; +} + +/* Callback to bind cooling device to thermal zone */ +static int db8500_cdev_bind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + unsigned long max_state, upper, lower; + int i, ret = -EINVAL; + + cdev->ops->get_max_state(cdev, &max_state); + + for (i = 0; i < ptrips->num_trips; i++) { + if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i])) + continue; + + upper = lower = i > max_state ? max_state : i; + + ret = thermal_zone_bind_cooling_device(thermal, i, cdev, + upper, lower); + + dev_info(&cdev->device, "%s bind to %d: %d-%s\n", cdev->type, + i, ret, ret ? "fail" : "succeed"); + } + + return ret; +} + +/* Callback to unbind cooling device from thermal zone */ +static int db8500_cdev_unbind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + int i, ret = -EINVAL; + + for (i = 0; i < ptrips->num_trips; i++) { + if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i])) + continue; + + ret = thermal_zone_unbind_cooling_device(thermal, i, cdev); + + dev_info(&cdev->device, "%s unbind from %d: %s\n", cdev->type, + i, ret ? "fail" : "succeed"); + } + + return ret; +} + +/* Callback to get current temperature */ +static int db8500_sys_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + + /* + * TODO: There is no PRCMU interface to get temperature data currently, + * so a pseudo temperature is returned , it works for thermal framework + * and this will be fixed when the PRCMU interface is available. + */ + *temp = pzone->cur_temp_pseudo; + + return 0; +} + +/* Callback to get temperature changing trend */ +static int db8500_sys_get_trend(struct thermal_zone_device *thermal, + int trip, enum thermal_trend *trend) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + + *trend = pzone->trend; + + return 0; +} + +/* Callback to get thermal zone mode */ +static int db8500_sys_get_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode *mode) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + + mutex_lock(&pzone->th_lock); + *mode = pzone->mode; + mutex_unlock(&pzone->th_lock); + + return 0; +} + +/* Callback to set thermal zone mode */ +static int db8500_sys_set_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + + mutex_lock(&pzone->th_lock); + + pzone->mode = mode; + if (mode == THERMAL_DEVICE_ENABLED) + schedule_work(&pzone->therm_work); + + mutex_unlock(&pzone->th_lock); + + return 0; +} + +/* Callback to get trip point type */ +static int db8500_sys_get_trip_type(struct thermal_zone_device *thermal, + int trip, enum thermal_trip_type *type) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + + if (trip >= ptrips->num_trips) + return -EINVAL; + + *type = ptrips->trip_points[trip].type; + + return 0; +} + +/* Callback to get trip point temperature */ +static int db8500_sys_get_trip_temp(struct thermal_zone_device *thermal, + int trip, unsigned long *temp) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + + if (trip >= ptrips->num_trips) + return -EINVAL; + + *temp = ptrips->trip_points[trip].temp; + + return 0; +} + +/* Callback to get critical trip point temperature */ +static int db8500_sys_get_crit_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + int i; + + for (i = ptrips->num_trips - 1; i > 0; i--) { + if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) { + *temp = ptrips->trip_points[i].temp; + return 0; + } + } + + return -EINVAL; +} + +static struct thermal_zone_device_ops thdev_ops = { + .bind = db8500_cdev_bind, + .unbind = db8500_cdev_unbind, + .get_temp = db8500_sys_get_temp, + .get_trend = db8500_sys_get_trend, + .get_mode = db8500_sys_get_mode, + .set_mode = db8500_sys_set_mode, + .get_trip_type = db8500_sys_get_trip_type, + .get_trip_temp = db8500_sys_get_trip_temp, + .get_crit_temp = db8500_sys_get_crit_temp, +}; + +static void db8500_thermal_update_config(struct db8500_thermal_zone *pzone, + unsigned int idx, enum thermal_trend trend, + unsigned long next_low, unsigned long next_high) +{ + prcmu_stop_temp_sense(); + + pzone->cur_index = idx; + pzone->cur_temp_pseudo = (next_low + next_high)/2; + pzone->trend = trend; + + prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000)); + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME); +} + +static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data) +{ + struct db8500_thermal_zone *pzone = irq_data; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + unsigned int idx = pzone->cur_index; + unsigned long next_low, next_high; + + if (unlikely(idx == 0)) + /* Meaningless for thermal management, ignoring it */ + return IRQ_HANDLED; + + if (idx == 1) { + next_high = ptrips->trip_points[0].temp; + next_low = PRCMU_DEFAULT_LOW_TEMP; + } else { + next_high = ptrips->trip_points[idx-1].temp; + next_low = ptrips->trip_points[idx-2].temp; + } + idx -= 1; + + db8500_thermal_update_config(pzone, idx, THERMAL_TREND_DROPPING, + next_low, next_high); + + dev_dbg(&pzone->therm_dev->device, + "PRCMU set max %ld, min %ld\n", next_high, next_low); + + schedule_work(&pzone->therm_work); + + return IRQ_HANDLED; +} + +static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data) +{ + struct db8500_thermal_zone *pzone = irq_data; + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + unsigned int idx = pzone->cur_index; + unsigned long next_low, next_high; + + if (idx < ptrips->num_trips - 1) { + next_high = ptrips->trip_points[idx+1].temp; + next_low = ptrips->trip_points[idx].temp; + idx += 1; + + db8500_thermal_update_config(pzone, idx, THERMAL_TREND_RAISING, + next_low, next_high); + + dev_dbg(&pzone->therm_dev->device, + "PRCMU set max %ld, min %ld\n", next_high, next_low); + } else if (idx == ptrips->num_trips - 1) + pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1; + + schedule_work(&pzone->therm_work); + + return IRQ_HANDLED; +} + +static void db8500_thermal_work(struct work_struct *work) +{ + enum thermal_device_mode cur_mode; + struct db8500_thermal_zone *pzone; + + pzone = container_of(work, struct db8500_thermal_zone, therm_work); + + mutex_lock(&pzone->th_lock); + cur_mode = pzone->mode; + mutex_unlock(&pzone->th_lock); + + if (cur_mode == THERMAL_DEVICE_DISABLED) + return; + + thermal_zone_device_update(pzone->therm_dev); + dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); +} + +#ifdef CONFIG_OF +static struct db8500_thsens_platform_data* + db8500_thermal_parse_dt(struct platform_device *pdev) +{ + struct db8500_thsens_platform_data *ptrips; + struct device_node *np = pdev->dev.of_node; + char prop_name[32]; + const char *tmp_str; + u32 tmp_data; + int i, j; + + ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL); + if (!ptrips) + return NULL; + + if (of_property_read_u32(np, "num-trips", &tmp_data)) + goto err_parse_dt; + + if (tmp_data > THERMAL_MAX_TRIPS) + goto err_parse_dt; + + ptrips->num_trips = tmp_data; + + for (i = 0; i < ptrips->num_trips; i++) { + sprintf(prop_name, "trip%d-temp", i); + if (of_property_read_u32(np, prop_name, &tmp_data)) + goto err_parse_dt; + + ptrips->trip_points[i].temp = tmp_data; + + sprintf(prop_name, "trip%d-type", i); + if (of_property_read_string(np, prop_name, &tmp_str)) + goto err_parse_dt; + + if (!strcmp(tmp_str, "active")) + ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE; + else if (!strcmp(tmp_str, "passive")) + ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE; + else if (!strcmp(tmp_str, "hot")) + ptrips->trip_points[i].type = THERMAL_TRIP_HOT; + else if (!strcmp(tmp_str, "critical")) + ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL; + else + goto err_parse_dt; + + sprintf(prop_name, "trip%d-cdev-num", i); + if (of_property_read_u32(np, prop_name, &tmp_data)) + goto err_parse_dt; + + if (tmp_data > COOLING_DEV_MAX) + goto err_parse_dt; + + for (j = 0; j < tmp_data; j++) { + sprintf(prop_name, "trip%d-cdev-name%d", i, j); + if (of_property_read_string(np, prop_name, &tmp_str)) + goto err_parse_dt; + + if (strlen(tmp_str) >= THERMAL_NAME_LENGTH) + goto err_parse_dt; + + strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str); + } + } + return ptrips; + +err_parse_dt: + dev_err(&pdev->dev, "Parsing device tree data error.\n"); + return NULL; +} +#else +static inline struct db8500_thsens_platform_data* + db8500_thermal_parse_dt(struct platform_device *pdev) +{ + return NULL; +} +#endif + +static int db8500_thermal_probe(struct platform_device *pdev) +{ + struct db8500_thermal_zone *pzone = NULL; + struct db8500_thsens_platform_data *ptrips = NULL; + struct device_node *np = pdev->dev.of_node; + int low_irq, high_irq, ret = 0; + unsigned long dft_low, dft_high; + + if (np) + ptrips = db8500_thermal_parse_dt(pdev); + else + ptrips = dev_get_platdata(&pdev->dev); + + if (!ptrips) + return -EINVAL; + + pzone = devm_kzalloc(&pdev->dev, sizeof(*pzone), GFP_KERNEL); + if (!pzone) + return -ENOMEM; + + mutex_init(&pzone->th_lock); + mutex_lock(&pzone->th_lock); + + pzone->mode = THERMAL_DEVICE_DISABLED; + pzone->trip_tab = ptrips; + + INIT_WORK(&pzone->therm_work, db8500_thermal_work); + + low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW"); + if (low_irq < 0) { + dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n"); + return low_irq; + } + + ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL, + prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, + "dbx500_temp_low", pzone); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to allocate temp low irq.\n"); + return ret; + } + + high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); + if (high_irq < 0) { + dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n"); + return high_irq; + } + + ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL, + prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, + "dbx500_temp_high", pzone); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to allocate temp high irq.\n"); + return ret; + } + + pzone->therm_dev = thermal_zone_device_register("db8500_thermal_zone", + ptrips->num_trips, 0, pzone, &thdev_ops, NULL, 0, 0); + + if (IS_ERR_OR_NULL(pzone->therm_dev)) { + dev_err(&pdev->dev, "Register thermal zone device failed.\n"); + return PTR_ERR(pzone->therm_dev); + } + dev_info(&pdev->dev, "Thermal zone device registered.\n"); + + dft_low = PRCMU_DEFAULT_LOW_TEMP; + dft_high = ptrips->trip_points[0].temp; + + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, + dft_low, dft_high); + + platform_set_drvdata(pdev, pzone); + pzone->mode = THERMAL_DEVICE_ENABLED; + mutex_unlock(&pzone->th_lock); + + return 0; +} + +static int db8500_thermal_remove(struct platform_device *pdev) +{ + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); + + thermal_zone_device_unregister(pzone->therm_dev); + cancel_work_sync(&pzone->therm_work); + mutex_destroy(&pzone->th_lock); + + return 0; +} + +static int db8500_thermal_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); + + flush_work(&pzone->therm_work); + prcmu_stop_temp_sense(); + + return 0; +} + +static int db8500_thermal_resume(struct platform_device *pdev) +{ + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + unsigned long dft_low, dft_high; + + dft_low = PRCMU_DEFAULT_LOW_TEMP; + dft_high = ptrips->trip_points[0].temp; + + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, + dft_low, dft_high); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id db8500_thermal_match[] = { + { .compatible = "stericsson,db8500-thermal" }, + {}, +}; +#else +#define db8500_thermal_match NULL +#endif + +static struct platform_driver db8500_thermal_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "db8500-thermal", + .of_match_table = db8500_thermal_match, + }, + .probe = db8500_thermal_probe, + .suspend = db8500_thermal_suspend, + .resume = db8500_thermal_resume, + .remove = db8500_thermal_remove, +}; + +module_platform_driver(db8500_thermal_driver); + +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); +MODULE_DESCRIPTION("DB8500 thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index 6dd29e4ce36b..7772d1603769 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -451,7 +451,7 @@ static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) th_zone->cool_dev_size++; th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name, - EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, 0, + EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0, IDLE_INTERVAL); if (IS_ERR(th_zone->therm_dev)) { diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c new file mode 100644 index 000000000000..792479f2b64b --- /dev/null +++ b/drivers/thermal/fair_share.c @@ -0,0 +1,133 @@ +/* + * fair_share.c - A simple weight based Thermal governor + * + * Copyright (C) 2012 Intel Corp + * Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/thermal.h> + +#include "thermal_core.h" + +/** + * get_trip_level: - obtains the current trip level for a zone + * @tz: thermal zone device + */ +static int get_trip_level(struct thermal_zone_device *tz) +{ + int count = 0; + unsigned long trip_temp; + + if (tz->trips == 0 || !tz->ops->get_trip_temp) + return 0; + + for (count = 0; count < tz->trips; count++) { + tz->ops->get_trip_temp(tz, count, &trip_temp); + if (tz->temperature < trip_temp) + break; + } + return count; +} + +static long get_target_state(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev, int weight, int level) +{ + unsigned long max_state; + + cdev->ops->get_max_state(cdev, &max_state); + + return (long)(weight * level * max_state) / (100 * tz->trips); +} + +/** + * fair_share_throttle - throttles devices asscciated with the given zone + * @tz - thermal_zone_device + * + * Throttling Logic: This uses three parameters to calculate the new + * throttle state of the cooling devices associated with the given zone. + * + * Parameters used for Throttling: + * P1. max_state: Maximum throttle state exposed by the cooling device. + * P2. weight[i]/100: + * How 'effective' the 'i'th device is, in cooling the given zone. + * P3. cur_trip_level/max_no_of_trips: + * This describes the extent to which the devices should be throttled. + * We do not want to throttle too much when we trip a lower temperature, + * whereas the throttling is at full swing if we trip critical levels. + * (Heavily assumes the trip points are in ascending order) + * new_state of cooling device = P3 * P2 * P1 + */ +static int fair_share_throttle(struct thermal_zone_device *tz, int trip) +{ + const struct thermal_zone_params *tzp; + struct thermal_cooling_device *cdev; + struct thermal_instance *instance; + int i; + int cur_trip_level = get_trip_level(tz); + + if (!tz->tzp || !tz->tzp->tbp) + return -EINVAL; + + tzp = tz->tzp; + + for (i = 0; i < tzp->num_tbps; i++) { + if (!tzp->tbp[i].cdev) + continue; + + cdev = tzp->tbp[i].cdev; + instance = get_thermal_instance(tz, cdev, trip); + if (!instance) + continue; + + instance->target = get_target_state(tz, cdev, + tzp->tbp[i].weight, cur_trip_level); + + instance->cdev->updated = false; + thermal_cdev_update(cdev); + } + return 0; +} + +static struct thermal_governor thermal_gov_fair_share = { + .name = "fair_share", + .throttle = fair_share_throttle, + .owner = THIS_MODULE, +}; + +static int __init thermal_gov_fair_share_init(void) +{ + return thermal_register_governor(&thermal_gov_fair_share); +} + +static void __exit thermal_gov_fair_share_exit(void) +{ + thermal_unregister_governor(&thermal_gov_fair_share); +} + +/* This should load after thermal framework */ +fs_initcall(thermal_gov_fair_share_init); +module_exit(thermal_gov_fair_share_exit); + +MODULE_AUTHOR("Durgadoss R"); +MODULE_DESCRIPTION("A simple weight based thermal throttling governor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index f7a1b574a304..90db951725da 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -43,6 +43,9 @@ struct rcar_thermal_priv { u32 comp; }; +#define MCELSIUS(temp) ((temp) * 1000) +#define rcar_zone_to_priv(zone) (zone->devdata) + /* * basic functions */ @@ -96,7 +99,7 @@ static void rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg, static int rcar_thermal_get_temp(struct thermal_zone_device *zone, unsigned long *temp) { - struct rcar_thermal_priv *priv = zone->devdata; + struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone); int val, min, max, tmp; tmp = -200; /* default */ @@ -169,7 +172,7 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, } } - *temp = tmp; + *temp = MCELSIUS(tmp); return 0; } @@ -185,7 +188,6 @@ static int rcar_thermal_probe(struct platform_device *pdev) struct thermal_zone_device *zone; struct rcar_thermal_priv *priv; struct resource *res; - int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -206,16 +208,14 @@ static int rcar_thermal_probe(struct platform_device *pdev) res->start, resource_size(res)); if (!priv->base) { dev_err(&pdev->dev, "Unable to ioremap thermal register\n"); - ret = -ENOMEM; - goto error_free_priv; + return -ENOMEM; } zone = thermal_zone_device_register("rcar_thermal", 0, 0, priv, - &rcar_thermal_zone_ops, 0, 0); + &rcar_thermal_zone_ops, NULL, 0, 0); if (IS_ERR(zone)) { dev_err(&pdev->dev, "thermal zone device is NULL\n"); - ret = PTR_ERR(zone); - goto error_iounmap; + return PTR_ERR(zone); } platform_set_drvdata(pdev, zone); @@ -223,26 +223,15 @@ static int rcar_thermal_probe(struct platform_device *pdev) dev_info(&pdev->dev, "proved\n"); return 0; - -error_iounmap: - devm_iounmap(&pdev->dev, priv->base); -error_free_priv: - devm_kfree(&pdev->dev, priv); - - return ret; } static int rcar_thermal_remove(struct platform_device *pdev) { struct thermal_zone_device *zone = platform_get_drvdata(pdev); - struct rcar_thermal_priv *priv = zone->devdata; thermal_zone_device_unregister(zone); platform_set_drvdata(pdev, NULL); - devm_iounmap(&pdev->dev, priv->base); - devm_kfree(&pdev->dev, priv); - return 0; } diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index 9bc969261d01..6b2d8b21aaee 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -147,7 +147,7 @@ static int spear_thermal_probe(struct platform_device *pdev) writel_relaxed(stdev->flags, stdev->thermal_base); spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0, - stdev, &ops, 0, 0); + stdev, &ops, NULL, 0, 0); if (IS_ERR(spear_thermal)) { dev_err(&pdev->dev, "thermal zone device is NULL\n"); ret = PTR_ERR(spear_thermal); diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c new file mode 100644 index 000000000000..0cd5e9fbab1c --- /dev/null +++ b/drivers/thermal/step_wise.c @@ -0,0 +1,194 @@ +/* + * step_wise.c - A step-by-step Thermal throttling governor + * + * Copyright (C) 2012 Intel Corp + * Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/thermal.h> + +#include "thermal_core.h" + +/* + * If the temperature is higher than a trip point, + * a. if the trend is THERMAL_TREND_RAISING, use higher cooling + * state for this trip point + * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling + * state for this trip point + */ +static unsigned long get_target_state(struct thermal_instance *instance, + enum thermal_trend trend) +{ + struct thermal_cooling_device *cdev = instance->cdev; + unsigned long cur_state; + + cdev->ops->get_cur_state(cdev, &cur_state); + + if (trend == THERMAL_TREND_RAISING) { + cur_state = cur_state < instance->upper ? + (cur_state + 1) : instance->upper; + } else if (trend == THERMAL_TREND_DROPPING) { + cur_state = cur_state > instance->lower ? + (cur_state - 1) : instance->lower; + } + + return cur_state; +} + +static void update_passive_instance(struct thermal_zone_device *tz, + enum thermal_trip_type type, int value) +{ + /* + * If value is +1, activate a passive instance. + * If value is -1, deactivate a passive instance. + */ + if (type == THERMAL_TRIP_PASSIVE || type == THERMAL_TRIPS_NONE) + tz->passive += value; +} + +static void update_instance_for_throttle(struct thermal_zone_device *tz, + int trip, enum thermal_trip_type trip_type, + enum thermal_trend trend) +{ + struct thermal_instance *instance; + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip) + continue; + + instance->target = get_target_state(instance, trend); + + /* Activate a passive thermal instance */ + if (instance->target == THERMAL_NO_TARGET) + update_passive_instance(tz, trip_type, 1); + + instance->cdev->updated = false; /* cdev needs update */ + } +} + +static void update_instance_for_dethrottle(struct thermal_zone_device *tz, + int trip, enum thermal_trip_type trip_type) +{ + struct thermal_instance *instance; + struct thermal_cooling_device *cdev; + unsigned long cur_state; + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip || + instance->target == THERMAL_NO_TARGET) + continue; + + cdev = instance->cdev; + cdev->ops->get_cur_state(cdev, &cur_state); + + instance->target = cur_state > instance->lower ? + (cur_state - 1) : THERMAL_NO_TARGET; + + /* Deactivate a passive thermal instance */ + if (instance->target == THERMAL_NO_TARGET) + update_passive_instance(tz, trip_type, -1); + + cdev->updated = false; /* cdev needs update */ + } +} + +static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) +{ + long trip_temp; + enum thermal_trip_type trip_type; + enum thermal_trend trend; + + if (trip == THERMAL_TRIPS_NONE) { + trip_temp = tz->forced_passive; + trip_type = THERMAL_TRIPS_NONE; + } else { + tz->ops->get_trip_temp(tz, trip, &trip_temp); + tz->ops->get_trip_type(tz, trip, &trip_type); + } + + trend = get_tz_trend(tz, trip); + + mutex_lock(&tz->lock); + + if (tz->temperature >= trip_temp) + update_instance_for_throttle(tz, trip, trip_type, trend); + else + update_instance_for_dethrottle(tz, trip, trip_type); + + mutex_unlock(&tz->lock); +} + +/** + * step_wise_throttle - throttles devices asscciated with the given zone + * @tz - thermal_zone_device + * @trip - the trip point + * @trip_type - type of the trip point + * + * Throttling Logic: This uses the trend of the thermal zone to throttle. + * If the thermal zone is 'heating up' this throttles all the cooling + * devices associated with the zone and its particular trip point, by one + * step. If the zone is 'cooling down' it brings back the performance of + * the devices by one step. + */ +static int step_wise_throttle(struct thermal_zone_device *tz, int trip) +{ + struct thermal_instance *instance; + + thermal_zone_trip_update(tz, trip); + + if (tz->forced_passive) + thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE); + + mutex_lock(&tz->lock); + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) + thermal_cdev_update(instance->cdev); + + mutex_unlock(&tz->lock); + + return 0; +} + +static struct thermal_governor thermal_gov_step_wise = { + .name = "step_wise", + .throttle = step_wise_throttle, + .owner = THIS_MODULE, +}; + +static int __init thermal_gov_step_wise_init(void) +{ + return thermal_register_governor(&thermal_gov_step_wise); +} + +static void __exit thermal_gov_step_wise_exit(void) +{ + thermal_unregister_governor(&thermal_gov_step_wise); +} + +/* This should load after thermal framework */ +fs_initcall(thermal_gov_step_wise_init); +module_exit(thermal_gov_step_wise_exit); + +MODULE_AUTHOR("Durgadoss R"); +MODULE_DESCRIPTION("A step-by-step thermal throttling governor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h new file mode 100644 index 000000000000..0d3205a18112 --- /dev/null +++ b/drivers/thermal/thermal_core.h @@ -0,0 +1,53 @@ +/* + * thermal_core.h + * + * Copyright (C) 2012 Intel Corp + * Author: Durgadoss R <durgadoss.r@intel.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#ifndef __THERMAL_CORE_H__ +#define __THERMAL_CORE_H__ + +#include <linux/device.h> +#include <linux/thermal.h> + +/* Initial state of a cooling device during binding */ +#define THERMAL_NO_TARGET -1UL + +/* + * This structure is used to describe the behavior of + * a certain cooling device on a certain trip point + * in a certain thermal zone + */ +struct thermal_instance { + int id; + char name[THERMAL_NAME_LENGTH]; + struct thermal_zone_device *tz; + struct thermal_cooling_device *cdev; + int trip; + unsigned long upper; /* Highest cooling state for this trip point */ + unsigned long lower; /* Lowest cooling state for this trip point */ + unsigned long target; /* expected cooling state */ + char attr_name[THERMAL_NAME_LENGTH]; + struct device_attribute attr; + struct list_head tz_node; /* node in tz->thermal_instances */ + struct list_head cdev_node; /* node in cdev->thermal_instances */ +}; + +#endif /* __THERMAL_CORE_H__ */ diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 9ee42ca4d289..8c8ce806180f 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -37,38 +37,98 @@ #include <net/netlink.h> #include <net/genetlink.h> +#include "thermal_core.h" + MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); -#define THERMAL_NO_TARGET -1UL -/* - * This structure is used to describe the behavior of - * a certain cooling device on a certain trip point - * in a certain thermal zone - */ -struct thermal_instance { - int id; - char name[THERMAL_NAME_LENGTH]; - struct thermal_zone_device *tz; - struct thermal_cooling_device *cdev; - int trip; - unsigned long upper; /* Highest cooling state for this trip point */ - unsigned long lower; /* Lowest cooling state for this trip point */ - unsigned long target; /* expected cooling state */ - char attr_name[THERMAL_NAME_LENGTH]; - struct device_attribute attr; - struct list_head tz_node; /* node in tz->thermal_instances */ - struct list_head cdev_node; /* node in cdev->thermal_instances */ -}; - static DEFINE_IDR(thermal_tz_idr); static DEFINE_IDR(thermal_cdev_idr); static DEFINE_MUTEX(thermal_idr_lock); static LIST_HEAD(thermal_tz_list); static LIST_HEAD(thermal_cdev_list); +static LIST_HEAD(thermal_governor_list); + static DEFINE_MUTEX(thermal_list_lock); +static DEFINE_MUTEX(thermal_governor_lock); + +static struct thermal_governor *__find_governor(const char *name) +{ + struct thermal_governor *pos; + + list_for_each_entry(pos, &thermal_governor_list, governor_list) + if (!strnicmp(name, pos->name, THERMAL_NAME_LENGTH)) + return pos; + + return NULL; +} + +int thermal_register_governor(struct thermal_governor *governor) +{ + int err; + const char *name; + struct thermal_zone_device *pos; + + if (!governor) + return -EINVAL; + + mutex_lock(&thermal_governor_lock); + + err = -EBUSY; + if (__find_governor(governor->name) == NULL) { + err = 0; + list_add(&governor->governor_list, &thermal_governor_list); + } + + mutex_lock(&thermal_list_lock); + + list_for_each_entry(pos, &thermal_tz_list, node) { + if (pos->governor) + continue; + if (pos->tzp) + name = pos->tzp->governor_name; + else + name = DEFAULT_THERMAL_GOVERNOR; + if (!strnicmp(name, governor->name, THERMAL_NAME_LENGTH)) + pos->governor = governor; + } + + mutex_unlock(&thermal_list_lock); + mutex_unlock(&thermal_governor_lock); + + return err; +} +EXPORT_SYMBOL_GPL(thermal_register_governor); + +void thermal_unregister_governor(struct thermal_governor *governor) +{ + struct thermal_zone_device *pos; + + if (!governor) + return; + + mutex_lock(&thermal_governor_lock); + + if (__find_governor(governor->name) == NULL) + goto exit; + + mutex_lock(&thermal_list_lock); + + list_for_each_entry(pos, &thermal_tz_list, node) { + if (!strnicmp(pos->governor->name, governor->name, + THERMAL_NAME_LENGTH)) + pos->governor = NULL; + } + + mutex_unlock(&thermal_list_lock); + list_del(&governor->governor_list); +exit: + mutex_unlock(&thermal_governor_lock); + return; +} +EXPORT_SYMBOL_GPL(thermal_unregister_governor); static int get_idr(struct idr *idr, struct mutex *lock, int *id) { @@ -101,6 +161,262 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id) mutex_unlock(lock); } +int get_tz_trend(struct thermal_zone_device *tz, int trip) +{ + enum thermal_trend trend; + + if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) { + if (tz->temperature > tz->last_temperature) + trend = THERMAL_TREND_RAISING; + else if (tz->temperature < tz->last_temperature) + trend = THERMAL_TREND_DROPPING; + else + trend = THERMAL_TREND_STABLE; + } + + return trend; +} +EXPORT_SYMBOL(get_tz_trend); + +struct thermal_instance *get_thermal_instance(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev, int trip) +{ + struct thermal_instance *pos = NULL; + struct thermal_instance *target_instance = NULL; + + mutex_lock(&tz->lock); + mutex_lock(&cdev->lock); + + list_for_each_entry(pos, &tz->thermal_instances, tz_node) { + if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { + target_instance = pos; + break; + } + } + + mutex_unlock(&cdev->lock); + mutex_unlock(&tz->lock); + + return target_instance; +} +EXPORT_SYMBOL(get_thermal_instance); + +static void print_bind_err_msg(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev, int ret) +{ + dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n", + tz->type, cdev->type, ret); +} + +static void __bind(struct thermal_zone_device *tz, int mask, + struct thermal_cooling_device *cdev) +{ + int i, ret; + + for (i = 0; i < tz->trips; i++) { + if (mask & (1 << i)) { + ret = thermal_zone_bind_cooling_device(tz, i, cdev, + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT); + if (ret) + print_bind_err_msg(tz, cdev, ret); + } + } +} + +static void __unbind(struct thermal_zone_device *tz, int mask, + struct thermal_cooling_device *cdev) +{ + int i; + + for (i = 0; i < tz->trips; i++) + if (mask & (1 << i)) + thermal_zone_unbind_cooling_device(tz, i, cdev); +} + +static void bind_cdev(struct thermal_cooling_device *cdev) +{ + int i, ret; + const struct thermal_zone_params *tzp; + struct thermal_zone_device *pos = NULL; + + mutex_lock(&thermal_list_lock); + + list_for_each_entry(pos, &thermal_tz_list, node) { + if (!pos->tzp && !pos->ops->bind) + continue; + + if (!pos->tzp && pos->ops->bind) { + ret = pos->ops->bind(pos, cdev); + if (ret) + print_bind_err_msg(pos, cdev, ret); + } + + tzp = pos->tzp; + if (!tzp || !tzp->tbp) + continue; + + for (i = 0; i < tzp->num_tbps; i++) { + if (tzp->tbp[i].cdev || !tzp->tbp[i].match) + continue; + if (tzp->tbp[i].match(pos, cdev)) + continue; + tzp->tbp[i].cdev = cdev; + __bind(pos, tzp->tbp[i].trip_mask, cdev); + } + } + + mutex_unlock(&thermal_list_lock); +} + +static void bind_tz(struct thermal_zone_device *tz) +{ + int i, ret; + struct thermal_cooling_device *pos = NULL; + const struct thermal_zone_params *tzp = tz->tzp; + + if (!tzp && !tz->ops->bind) + return; + + mutex_lock(&thermal_list_lock); + + /* If there is no platform data, try to use ops->bind */ + if (!tzp && tz->ops->bind) { + list_for_each_entry(pos, &thermal_cdev_list, node) { + ret = tz->ops->bind(tz, pos); + if (ret) + print_bind_err_msg(tz, pos, ret); + } + goto exit; + } + + if (!tzp || !tzp->tbp) + goto exit; + + list_for_each_entry(pos, &thermal_cdev_list, node) { + for (i = 0; i < tzp->num_tbps; i++) { + if (tzp->tbp[i].cdev || !tzp->tbp[i].match) + continue; + if (tzp->tbp[i].match(tz, pos)) + continue; + tzp->tbp[i].cdev = pos; + __bind(tz, tzp->tbp[i].trip_mask, pos); + } + } +exit: + mutex_unlock(&thermal_list_lock); +} + +static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, + int delay) +{ + if (delay > 1000) + mod_delayed_work(system_freezable_wq, &tz->poll_queue, + round_jiffies(msecs_to_jiffies(delay))); + else if (delay) + mod_delayed_work(system_freezable_wq, &tz->poll_queue, + msecs_to_jiffies(delay)); + else + cancel_delayed_work(&tz->poll_queue); +} + +static void monitor_thermal_zone(struct thermal_zone_device *tz) +{ + mutex_lock(&tz->lock); + + if (tz->passive) + thermal_zone_device_set_polling(tz, tz->passive_delay); + else if (tz->polling_delay) + thermal_zone_device_set_polling(tz, tz->polling_delay); + else + thermal_zone_device_set_polling(tz, 0); + + mutex_unlock(&tz->lock); +} + +static void handle_non_critical_trips(struct thermal_zone_device *tz, + int trip, enum thermal_trip_type trip_type) +{ + if (tz->governor) + tz->governor->throttle(tz, trip); +} + +static void handle_critical_trips(struct thermal_zone_device *tz, + int trip, enum thermal_trip_type trip_type) +{ + long trip_temp; + + tz->ops->get_trip_temp(tz, trip, &trip_temp); + + /* If we have not crossed the trip_temp, we do not care. */ + if (tz->temperature < trip_temp) + return; + + if (tz->ops->notify) + tz->ops->notify(tz, trip, trip_type); + + if (trip_type == THERMAL_TRIP_CRITICAL) { + pr_emerg("Critical temperature reached(%d C),shutting down\n", + tz->temperature / 1000); + orderly_poweroff(true); + } +} + +static void handle_thermal_trip(struct thermal_zone_device *tz, int trip) +{ + enum thermal_trip_type type; + + tz->ops->get_trip_type(tz, trip, &type); + + if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT) + handle_critical_trips(tz, trip, type); + else + handle_non_critical_trips(tz, trip, type); + /* + * Alright, we handled this trip successfully. + * So, start monitoring again. + */ + monitor_thermal_zone(tz); +} + +static void update_temperature(struct thermal_zone_device *tz) +{ + long temp; + int ret; + + mutex_lock(&tz->lock); + + ret = tz->ops->get_temp(tz, &temp); + if (ret) { + pr_warn("failed to read out thermal zone %d\n", tz->id); + goto exit; + } + + tz->last_temperature = tz->temperature; + tz->temperature = temp; + +exit: + mutex_unlock(&tz->lock); +} + +void thermal_zone_device_update(struct thermal_zone_device *tz) +{ + int count; + + update_temperature(tz); + + for (count = 0; count < tz->trips; count++) + handle_thermal_trip(tz, count); +} +EXPORT_SYMBOL(thermal_zone_device_update); + +static void thermal_zone_device_check(struct work_struct *work) +{ + struct thermal_zone_device *tz = container_of(work, struct + thermal_zone_device, + poll_queue.work); + thermal_zone_device_update(tz); +} + /* sys I/F for thermal zone */ #define to_thermal_zone(_dev) \ @@ -354,10 +670,41 @@ passive_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", tz->forced_passive); } +static ssize_t +policy_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret = -EINVAL; + struct thermal_zone_device *tz = to_thermal_zone(dev); + struct thermal_governor *gov; + + mutex_lock(&thermal_governor_lock); + + gov = __find_governor(buf); + if (!gov) + goto exit; + + tz->governor = gov; + ret = count; + +exit: + mutex_unlock(&thermal_governor_lock); + return ret; +} + +static ssize_t +policy_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + return sprintf(buf, "%s\n", tz->governor->name); +} + static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); +static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store); /* sys I/F for cooling device */ #define to_cooling_device(_dev) \ @@ -700,27 +1047,6 @@ thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) } #endif -static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, - int delay) -{ - if (delay > 1000) - mod_delayed_work(system_freezable_wq, &tz->poll_queue, - round_jiffies(msecs_to_jiffies(delay))); - else if (delay) - mod_delayed_work(system_freezable_wq, &tz->poll_queue, - msecs_to_jiffies(delay)); - else - cancel_delayed_work(&tz->poll_queue); -} - -static void thermal_zone_device_check(struct work_struct *work) -{ - struct thermal_zone_device *tz = container_of(work, struct - thermal_zone_device, - poll_queue.work); - thermal_zone_device_update(tz); -} - /** * thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone * @tz: thermal zone device @@ -895,7 +1221,6 @@ thermal_cooling_device_register(char *type, void *devdata, const struct thermal_cooling_device_ops *ops) { struct thermal_cooling_device *cdev; - struct thermal_zone_device *pos; int result; if (type && strlen(type) >= THERMAL_NAME_LENGTH) @@ -945,20 +1270,15 @@ thermal_cooling_device_register(char *type, void *devdata, if (result) goto unregister; + /* Add 'this' new cdev to the global cdev list */ mutex_lock(&thermal_list_lock); list_add(&cdev->node, &thermal_cdev_list); - list_for_each_entry(pos, &thermal_tz_list, node) { - if (!pos->ops->bind) - continue; - result = pos->ops->bind(pos, cdev); - if (result) - break; - - } mutex_unlock(&thermal_list_lock); - if (!result) - return cdev; + /* Update binding information for 'this' new cdev */ + bind_cdev(cdev); + + return cdev; unregister: release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); @@ -974,10 +1294,10 @@ EXPORT_SYMBOL(thermal_cooling_device_register); * thermal_cooling_device_unregister() must be called when the device is no * longer needed. */ -void thermal_cooling_device_unregister(struct - thermal_cooling_device - *cdev) +void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) { + int i; + const struct thermal_zone_params *tzp; struct thermal_zone_device *tz; struct thermal_cooling_device *pos = NULL; @@ -994,12 +1314,28 @@ void thermal_cooling_device_unregister(struct return; } list_del(&cdev->node); + + /* Unbind all thermal zones associated with 'this' cdev */ list_for_each_entry(tz, &thermal_tz_list, node) { - if (!tz->ops->unbind) + if (tz->ops->unbind) { + tz->ops->unbind(tz, cdev); continue; - tz->ops->unbind(tz, cdev); + } + + if (!tz->tzp || !tz->tzp->tbp) + continue; + + tzp = tz->tzp; + for (i = 0; i < tzp->num_tbps; i++) { + if (tzp->tbp[i].cdev == cdev) { + __unbind(tz, tzp->tbp[i].trip_mask, cdev); + tzp->tbp[i].cdev = NULL; + } + } } + mutex_unlock(&thermal_list_lock); + if (cdev->type[0]) device_remove_file(&cdev->device, &dev_attr_cdev_type); device_remove_file(&cdev->device, &dev_attr_max_state); @@ -1011,7 +1347,7 @@ void thermal_cooling_device_unregister(struct } EXPORT_SYMBOL(thermal_cooling_device_unregister); -static void thermal_cdev_do_update(struct thermal_cooling_device *cdev) +void thermal_cdev_update(struct thermal_cooling_device *cdev) { struct thermal_instance *instance; unsigned long target = 0; @@ -1032,183 +1368,25 @@ static void thermal_cdev_do_update(struct thermal_cooling_device *cdev) cdev->ops->set_cur_state(cdev, target); cdev->updated = true; } +EXPORT_SYMBOL(thermal_cdev_update); -static void thermal_zone_do_update(struct thermal_zone_device *tz) -{ - struct thermal_instance *instance; - - list_for_each_entry(instance, &tz->thermal_instances, tz_node) - thermal_cdev_do_update(instance->cdev); -} - -/* - * Cooling algorithm for both active and passive cooling - * - * 1. if the temperature is higher than a trip point, - * a. if the trend is THERMAL_TREND_RAISING, use higher cooling - * state for this trip point - * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling - * state for this trip point - * - * 2. if the temperature is lower than a trip point, use lower - * cooling state for this trip point - * - * Note that this behaves the same as the previous passive cooling - * algorithm. - */ - -static void thermal_zone_trip_update(struct thermal_zone_device *tz, - int trip, long temp) -{ - struct thermal_instance *instance; - struct thermal_cooling_device *cdev = NULL; - unsigned long cur_state, max_state; - long trip_temp; - enum thermal_trip_type trip_type; - enum thermal_trend trend; - - if (trip == THERMAL_TRIPS_NONE) { - trip_temp = tz->forced_passive; - trip_type = THERMAL_TRIPS_NONE; - } else { - tz->ops->get_trip_temp(tz, trip, &trip_temp); - tz->ops->get_trip_type(tz, trip, &trip_type); - } - - if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) { - /* - * compare the current temperature and previous temperature - * to get the thermal trend, if no special requirement - */ - if (tz->temperature > tz->last_temperature) - trend = THERMAL_TREND_RAISING; - else if (tz->temperature < tz->last_temperature) - trend = THERMAL_TREND_DROPPING; - else - trend = THERMAL_TREND_STABLE; - } - - if (temp >= trip_temp) { - list_for_each_entry(instance, &tz->thermal_instances, tz_node) { - if (instance->trip != trip) - continue; - - cdev = instance->cdev; - - cdev->ops->get_cur_state(cdev, &cur_state); - cdev->ops->get_max_state(cdev, &max_state); - - if (trend == THERMAL_TREND_RAISING) { - cur_state = cur_state < instance->upper ? - (cur_state + 1) : instance->upper; - } else if (trend == THERMAL_TREND_DROPPING) { - cur_state = cur_state > instance->lower ? - (cur_state - 1) : instance->lower; - } - - /* activate a passive thermal instance */ - if ((trip_type == THERMAL_TRIP_PASSIVE || - trip_type == THERMAL_TRIPS_NONE) && - instance->target == THERMAL_NO_TARGET) - tz->passive++; - - instance->target = cur_state; - cdev->updated = false; /* cooling device needs update */ - } - } else { /* below trip */ - list_for_each_entry(instance, &tz->thermal_instances, tz_node) { - if (instance->trip != trip) - continue; - - /* Do not use the inactive thermal instance */ - if (instance->target == THERMAL_NO_TARGET) - continue; - cdev = instance->cdev; - cdev->ops->get_cur_state(cdev, &cur_state); - - cur_state = cur_state > instance->lower ? - (cur_state - 1) : THERMAL_NO_TARGET; - - /* deactivate a passive thermal instance */ - if ((trip_type == THERMAL_TRIP_PASSIVE || - trip_type == THERMAL_TRIPS_NONE) && - cur_state == THERMAL_NO_TARGET) - tz->passive--; - instance->target = cur_state; - cdev->updated = false; /* cooling device needs update */ - } - } - - return; -} /** - * thermal_zone_device_update - force an update of a thermal zone's state - * @ttz: the thermal zone to update + * notify_thermal_framework - Sensor drivers use this API to notify framework + * @tz: thermal zone device + * @trip: indicates which trip point has been crossed + * + * This function handles the trip events from sensor drivers. It starts + * throttling the cooling devices according to the policy configured. + * For CRITICAL and HOT trip points, this notifies the respective drivers, + * and does actual throttling for other trip points i.e ACTIVE and PASSIVE. + * The throttling policy is based on the configured platform data; if no + * platform data is provided, this uses the step_wise throttling policy. */ - -void thermal_zone_device_update(struct thermal_zone_device *tz) +void notify_thermal_framework(struct thermal_zone_device *tz, int trip) { - int count, ret = 0; - long temp, trip_temp; - enum thermal_trip_type trip_type; - - mutex_lock(&tz->lock); - - if (tz->ops->get_temp(tz, &temp)) { - /* get_temp failed - retry it later */ - pr_warn("failed to read out thermal zone %d\n", tz->id); - goto leave; - } - - tz->last_temperature = tz->temperature; - tz->temperature = temp; - - for (count = 0; count < tz->trips; count++) { - tz->ops->get_trip_type(tz, count, &trip_type); - tz->ops->get_trip_temp(tz, count, &trip_temp); - - switch (trip_type) { - case THERMAL_TRIP_CRITICAL: - if (temp >= trip_temp) { - if (tz->ops->notify) - ret = tz->ops->notify(tz, count, - trip_type); - if (!ret) { - pr_emerg("Critical temperature reached (%ld C), shutting down\n", - temp/1000); - orderly_poweroff(true); - } - } - break; - case THERMAL_TRIP_HOT: - if (temp >= trip_temp) - if (tz->ops->notify) - tz->ops->notify(tz, count, trip_type); - break; - case THERMAL_TRIP_ACTIVE: - thermal_zone_trip_update(tz, count, temp); - break; - case THERMAL_TRIP_PASSIVE: - if (temp >= trip_temp || tz->passive) - thermal_zone_trip_update(tz, count, temp); - break; - } - } - - if (tz->forced_passive) - thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE, temp); - thermal_zone_do_update(tz); - -leave: - if (tz->passive) - thermal_zone_device_set_polling(tz, tz->passive_delay); - else if (tz->polling_delay) - thermal_zone_device_set_polling(tz, tz->polling_delay); - else - thermal_zone_device_set_polling(tz, 0); - mutex_unlock(&tz->lock); + handle_thermal_trip(tz, trip); } -EXPORT_SYMBOL(thermal_zone_device_update); +EXPORT_SYMBOL(notify_thermal_framework); /** * create_trip_attrs - create attributes for trip points @@ -1320,6 +1498,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) * @mask: a bit string indicating the writeablility of trip points * @devdata: private device data * @ops: standard thermal zone device callbacks + * @tzp: thermal zone platform parameters * @passive_delay: number of milliseconds to wait between polls when * performing passive cooling * @polling_delay: number of milliseconds to wait between polls when checking @@ -1332,10 +1511,10 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) struct thermal_zone_device *thermal_zone_device_register(const char *type, int trips, int mask, void *devdata, const struct thermal_zone_device_ops *ops, + const struct thermal_zone_params *tzp, int passive_delay, int polling_delay) { struct thermal_zone_device *tz; - struct thermal_cooling_device *pos; enum thermal_trip_type trip_type; int result; int count; @@ -1365,6 +1544,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, strcpy(tz->type, type ? : ""); tz->ops = ops; + tz->tzp = tzp; tz->device.class = &thermal_class; tz->devdata = devdata; tz->trips = trips; @@ -1406,27 +1586,38 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, passive = 1; } - if (!passive) - result = device_create_file(&tz->device, - &dev_attr_passive); + if (!passive) { + result = device_create_file(&tz->device, &dev_attr_passive); + if (result) + goto unregister; + } + /* Create policy attribute */ + result = device_create_file(&tz->device, &dev_attr_policy); if (result) goto unregister; + /* Update 'this' zone's governor information */ + mutex_lock(&thermal_governor_lock); + + if (tz->tzp) + tz->governor = __find_governor(tz->tzp->governor_name); + else + tz->governor = __find_governor(DEFAULT_THERMAL_GOVERNOR); + + mutex_unlock(&thermal_governor_lock); + result = thermal_add_hwmon_sysfs(tz); if (result) goto unregister; mutex_lock(&thermal_list_lock); list_add_tail(&tz->node, &thermal_tz_list); - if (ops->bind) - list_for_each_entry(pos, &thermal_cdev_list, node) { - result = ops->bind(tz, pos); - if (result) - break; - } mutex_unlock(&thermal_list_lock); + /* Bind cooling devices for this zone */ + bind_tz(tz); + INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check); thermal_zone_device_update(tz); @@ -1447,12 +1638,16 @@ EXPORT_SYMBOL(thermal_zone_device_register); */ void thermal_zone_device_unregister(struct thermal_zone_device *tz) { + int i; + const struct thermal_zone_params *tzp; struct thermal_cooling_device *cdev; struct thermal_zone_device *pos = NULL; if (!tz) return; + tzp = tz->tzp; + mutex_lock(&thermal_list_lock); list_for_each_entry(pos, &thermal_tz_list, node) if (pos == tz) @@ -1463,9 +1658,25 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) return; } list_del(&tz->node); - if (tz->ops->unbind) - list_for_each_entry(cdev, &thermal_cdev_list, node) - tz->ops->unbind(tz, cdev); + + /* Unbind all cdevs associated with 'this' thermal zone */ + list_for_each_entry(cdev, &thermal_cdev_list, node) { + if (tz->ops->unbind) { + tz->ops->unbind(tz, cdev); + continue; + } + + if (!tzp || !tzp->tbp) + break; + + for (i = 0; i < tzp->num_tbps; i++) { + if (tzp->tbp[i].cdev == cdev) { + __unbind(tz, tzp->tbp[i].trip_mask, cdev); + tzp->tbp[i].cdev = NULL; + } + } + } + mutex_unlock(&thermal_list_lock); thermal_zone_device_set_polling(tz, 0); @@ -1475,7 +1686,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_remove_file(&tz->device, &dev_attr_temp); if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); + device_remove_file(&tz->device, &dev_attr_policy); remove_trip_attrs(tz); + tz->governor = NULL; thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c new file mode 100644 index 000000000000..6bbb380b6d19 --- /dev/null +++ b/drivers/thermal/user_space.c @@ -0,0 +1,68 @@ +/* + * user_space.c - A simple user space Thermal events notifier + * + * Copyright (C) 2012 Intel Corp + * Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/thermal.h> + +#include "thermal_core.h" + +/** + * notify_user_space - Notifies user space about thermal events + * @tz - thermal_zone_device + * + * This function notifies the user space through UEvents. + */ +static int notify_user_space(struct thermal_zone_device *tz, int trip) +{ + mutex_lock(&tz->lock); + kobject_uevent(&tz->device.kobj, KOBJ_CHANGE); + mutex_unlock(&tz->lock); + return 0; +} + +static struct thermal_governor thermal_gov_user_space = { + .name = "user_space", + .throttle = notify_user_space, + .owner = THIS_MODULE, +}; + +static int __init thermal_gov_user_space_init(void) +{ + return thermal_register_governor(&thermal_gov_user_space); +} + +static void __exit thermal_gov_user_space_exit(void) +{ + thermal_unregister_governor(&thermal_gov_user_space); +} + +/* This should load after thermal framework */ +fs_initcall(thermal_gov_user_space_init); +module_exit(thermal_gov_user_space_exit); + +MODULE_AUTHOR("Durgadoss R"); +MODULE_DESCRIPTION("A user space Thermal notifier"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index 851530128e65..40b4ef54cc7d 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -29,13 +29,13 @@ #define CPUFREQ_COOLING_START 0 #define CPUFREQ_COOLING_STOP 1 -#ifdef CONFIG_CPU_THERMAL +#if defined(CONFIG_CPU_THERMAL) || defined(CONFIG_CPU_THERMAL_MODULE) /** * cpufreq_cooling_register - function to create cpufreq cooling device. * @clip_cpus: cpumask of cpus where the frequency constraints will happen */ struct thermal_cooling_device *cpufreq_cooling_register( - struct cpumask *clip_cpus); + const struct cpumask *clip_cpus); /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. @@ -44,7 +44,7 @@ struct thermal_cooling_device *cpufreq_cooling_register( void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev); #else /* !CONFIG_CPU_THERMAL */ static inline struct thermal_cooling_device *cpufreq_cooling_register( - struct cpumask *clip_cpus) + const struct cpumask *clip_cpus) { return NULL; } diff --git a/include/linux/platform_data/db8500_thermal.h b/include/linux/platform_data/db8500_thermal.h new file mode 100644 index 000000000000..3bf60902e902 --- /dev/null +++ b/include/linux/platform_data/db8500_thermal.h @@ -0,0 +1,38 @@ +/* + * db8500_thermal.h - DB8500 Thermal Management Implementation + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DB8500_THERMAL_H_ +#define _DB8500_THERMAL_H_ + +#include <linux/thermal.h> + +#define COOLING_DEV_MAX 8 + +struct db8500_trip_point { + unsigned long temp; + enum thermal_trip_type type; + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; +}; + +struct db8500_thsens_platform_data { + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; + int num_trips; +}; + +#endif /* _DB8500_THERMAL_H_ */ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 91b34812cd84..fe82022478e7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -29,6 +29,32 @@ #include <linux/device.h> #include <linux/workqueue.h> +#define THERMAL_TRIPS_NONE -1 +#define THERMAL_MAX_TRIPS 12 +#define THERMAL_NAME_LENGTH 20 + +/* No upper/lower limit requirement */ +#define THERMAL_NO_LIMIT -1UL + +/* Unit conversion macros */ +#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ + ((long)t-2732+5)/10 : ((long)t-2732-5)/10) +#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) + +/* Adding event notification support elements */ +#define THERMAL_GENL_FAMILY_NAME "thermal_event" +#define THERMAL_GENL_VERSION 0x01 +#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group" + +/* Default Thermal Governor */ +#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE) +#define DEFAULT_THERMAL_GOVERNOR "step_wise" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE) +#define DEFAULT_THERMAL_GOVERNOR "fair_share" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE) +#define DEFAULT_THERMAL_GOVERNOR "user_space" +#endif + struct thermal_zone_device; struct thermal_cooling_device; @@ -50,6 +76,30 @@ enum thermal_trend { THERMAL_TREND_DROPPING, /* temperature is dropping */ }; +/* Events supported by Thermal Netlink */ +enum events { + THERMAL_AUX0, + THERMAL_AUX1, + THERMAL_CRITICAL, + THERMAL_DEV_FAULT, +}; + +/* attributes of thermal_genl_family */ +enum { + THERMAL_GENL_ATTR_UNSPEC, + THERMAL_GENL_ATTR_EVENT, + __THERMAL_GENL_ATTR_MAX, +}; +#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) + +/* commands supported by the thermal_genl_family */ +enum { + THERMAL_GENL_CMD_UNSPEC, + THERMAL_GENL_CMD_EVENT, + __THERMAL_GENL_CMD_MAX, +}; +#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) + struct thermal_zone_device_ops { int (*bind) (struct thermal_zone_device *, struct thermal_cooling_device *); @@ -83,11 +133,6 @@ struct thermal_cooling_device_ops { int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); }; -#define THERMAL_NO_LIMIT -1UL /* no upper/lower limit requirement */ - -#define THERMAL_TRIPS_NONE -1 -#define THERMAL_MAX_TRIPS 12 -#define THERMAL_NAME_LENGTH 20 struct thermal_cooling_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -100,10 +145,6 @@ struct thermal_cooling_device { struct list_head node; }; -#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ - ((long)t-2732+5)/10 : ((long)t-2732-5)/10) -#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) - struct thermal_attr { struct device_attribute attr; char name[THERMAL_NAME_LENGTH]; @@ -125,46 +166,61 @@ struct thermal_zone_device { int passive; unsigned int forced_passive; const struct thermal_zone_device_ops *ops; + const struct thermal_zone_params *tzp; + struct thermal_governor *governor; struct list_head thermal_instances; struct idr idr; struct mutex lock; /* protect thermal_instances list */ struct list_head node; struct delayed_work poll_queue; }; -/* Adding event notification support elements */ -#define THERMAL_GENL_FAMILY_NAME "thermal_event" -#define THERMAL_GENL_VERSION 0x01 -#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group" -enum events { - THERMAL_AUX0, - THERMAL_AUX1, - THERMAL_CRITICAL, - THERMAL_DEV_FAULT, +/* Structure that holds thermal governor information */ +struct thermal_governor { + char name[THERMAL_NAME_LENGTH]; + int (*throttle)(struct thermal_zone_device *tz, int trip); + struct list_head governor_list; + struct module *owner; }; -struct thermal_genl_event { - u32 orig; - enum events event; +/* Structure that holds binding parameters for a zone */ +struct thermal_bind_params { + struct thermal_cooling_device *cdev; + + /* + * This is a measure of 'how effectively these devices can + * cool 'this' thermal zone. The shall be determined by platform + * characterization. This is on a 'percentage' scale. + * See Documentation/thermal/sysfs-api.txt for more information. + */ + int weight; + + /* + * This is a bit mask that gives the binding relation between this + * thermal zone and cdev, for a particular trip point. + * See Documentation/thermal/sysfs-api.txt for more information. + */ + int trip_mask; + int (*match) (struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev); }; -/* attributes of thermal_genl_family */ -enum { - THERMAL_GENL_ATTR_UNSPEC, - THERMAL_GENL_ATTR_EVENT, - __THERMAL_GENL_ATTR_MAX, + +/* Structure to define Thermal Zone parameters */ +struct thermal_zone_params { + char governor_name[THERMAL_NAME_LENGTH]; + int num_tbps; /* Number of tbp entries */ + struct thermal_bind_params *tbp; }; -#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) -/* commands supported by the thermal_genl_family */ -enum { - THERMAL_GENL_CMD_UNSPEC, - THERMAL_GENL_CMD_EVENT, - __THERMAL_GENL_CMD_MAX, +struct thermal_genl_event { + u32 orig; + enum events event; }; -#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) +/* Function declarations */ struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, - void *, const struct thermal_zone_device_ops *, int, int); + void *, const struct thermal_zone_device_ops *, + const struct thermal_zone_params *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, @@ -173,10 +229,20 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); + struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, const struct thermal_cooling_device_ops *); void thermal_cooling_device_unregister(struct thermal_cooling_device *); +int get_tz_trend(struct thermal_zone_device *, int); +struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, + struct thermal_cooling_device *, int); +void thermal_cdev_update(struct thermal_cooling_device *); +void notify_thermal_framework(struct thermal_zone_device *, int); + +int thermal_register_governor(struct thermal_governor *); +void thermal_unregister_governor(struct thermal_governor *); + #ifdef CONFIG_NET extern int thermal_generate_netlink_event(u32 orig, enum events event); #else |