diff options
author | Krzysztof Helt <krzysztof.h1@wp.pl> | 2009-01-09 23:10:52 +0100 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2009-01-11 13:09:05 +0100 |
commit | 199f7978730a4bbd88038fd84212b30759579f1a (patch) | |
tree | ee3deea40e2db5a38967fce16cb55a3b6103d154 /sound/isa/sscape.c | |
parent | c59765042f53a79a7a65585042ff463b69cb248c (diff) | |
download | linux-199f7978730a4bbd88038fd84212b30759579f1a.tar.bz2 |
ALSA: wss-lib: move AD1845 frequency setting into wss-lib
This is required to allow the sscape driver
to autodetect installed codec.
Also, do not create a timer if detected codec
has no hardware timer (e.g. AD1848).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Rene Herman
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/isa/sscape.c')
-rw-r--r-- | sound/isa/sscape.c | 113 |
1 files changed, 8 insertions, 105 deletions
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 48a16d865834..bc449166d18d 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -129,9 +129,6 @@ enum GA_REG { #define DMA_8BIT 0x80 -#define AD1845_FREQ_SEL_MSB 0x16 -#define AD1845_FREQ_SEL_LSB 0x17 - enum card_type { SSCAPE, SSCAPE_PNP, @@ -955,82 +952,6 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l /* - * Override for the CS4231 playback format function. - * The AD1845 has much simpler format and rate selection. - */ -static void ad1845_playback_format(struct snd_wss *chip, - struct snd_pcm_hw_params *params, - unsigned char format) -{ - unsigned long flags; - unsigned rate = params_rate(params); - - /* - * The AD1845 can't handle sample frequencies - * outside of 4 kHZ to 50 kHZ - */ - if (rate > 50000) - rate = 50000; - else if (rate < 4000) - rate = 4000; - - spin_lock_irqsave(&chip->reg_lock, flags); - - /* - * Program the AD1845 correctly for the playback stream. - * Note that we do NOT need to toggle the MCE bit because - * the PLAYBACK_ENABLE bit of the Interface Configuration - * register is set. - * - * NOTE: We seem to need to write to the MSB before the LSB - * to get the correct sample frequency. - */ - snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0)); - snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); - snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); - - spin_unlock_irqrestore(&chip->reg_lock, flags); -} - -/* - * Override for the CS4231 capture format function. - * The AD1845 has much simpler format and rate selection. - */ -static void ad1845_capture_format(struct snd_wss *chip, - struct snd_pcm_hw_params *params, - unsigned char format) -{ - unsigned long flags; - unsigned rate = params_rate(params); - - /* - * The AD1845 can't handle sample frequencies - * outside of 4 kHZ to 50 kHZ - */ - if (rate > 50000) - rate = 50000; - else if (rate < 4000) - rate = 4000; - - spin_lock_irqsave(&chip->reg_lock, flags); - - /* - * Program the AD1845 correctly for the playback stream. - * Note that we do NOT need to toggle the MCE bit because - * the CAPTURE_ENABLE bit of the Interface Configuration - * register is set. - * - * NOTE: We seem to need to write to the MSB before the LSB - * to get the correct sample frequency. - */ - snd_wss_out(chip, CS4231_REC_FORMAT, (format & 0xf0)); - snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); - snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); - - spin_unlock_irqrestore(&chip->reg_lock, flags); -} - -/* * Create an AD1845 PCM subdevice on the SoundScape. The AD1845 * is very much like a CS4231, with a few extra bits. We will * try to support at least some of the extra bits by overriding @@ -1055,11 +976,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, unsigned long flags; struct snd_pcm *pcm; -#define AD1845_FREQ_SEL_ENABLE 0x08 - -#define AD1845_PWR_DOWN_CTRL 0x1b -#define AD1845_CRYS_CLOCK_SEL 0x1d - /* * It turns out that the PLAYBACK_ENABLE bit is set * by the lowlevel driver ... @@ -1074,7 +990,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, */ if (sscape->type != SSCAPE_VIVO) { - int val; /* * The input clock frequency on the SoundScape must * be 14.31818 MHz, because we must set this register @@ -1082,22 +997,10 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, */ snd_wss_mce_up(chip); spin_lock_irqsave(&chip->reg_lock, flags); - snd_wss_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20); + snd_wss_out(chip, AD1845_CLOCK, 0x20); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_wss_mce_down(chip); - /* - * More custom configuration: - * a) select "mode 2" and provide a current drive of 8mA - * b) enable frequency selection (for capture/playback) - */ - spin_lock_irqsave(&chip->reg_lock, flags); - snd_wss_out(chip, CS4231_MISC_INFO, - CS4231_MODE2 | 0x10); - val = snd_wss_in(chip, AD1845_PWR_DOWN_CTRL); - snd_wss_out(chip, AD1845_PWR_DOWN_CTRL, - val | AD1845_FREQ_SEL_ENABLE); - spin_unlock_irqrestore(&chip->reg_lock, flags); } err = snd_wss_pcm(chip, 0, &pcm); @@ -1113,11 +1016,13 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, "for AD1845 chip\n"); goto _error; } - err = snd_wss_timer(chip, 0, NULL); - if (err < 0) { - snd_printk(KERN_ERR "sscape: No timer device " - "for AD1845 chip\n"); - goto _error; + if (chip->hardware != WSS_HW_AD1848) { + err = snd_wss_timer(chip, 0, NULL); + if (err < 0) { + snd_printk(KERN_ERR "sscape: No timer device " + "for AD1845 chip\n"); + goto _error; + } } if (sscape->type != SSCAPE_VIVO) { @@ -1128,8 +1033,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, "MIDI mixer control\n"); goto _error; } - chip->set_playback_format = ad1845_playback_format; - chip->set_capture_format = ad1845_capture_format; } strcpy(card->driver, "SoundScape"); |