Merge tag 'mac80211-next-for-davem-2016-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Some more work for 4.7, notably:
 * completion and fixups of nla_put_64_64bit() work
 * remove a/b/g/n from wext nickname to avoid confusion
   with 11ac (which wouldn't even fit fully there due to
   string length restrictions)

along with some other minor changes/cleanups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 88 insertions, 8 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 183916e168f1..63921672bed0 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1045,11 +1045,12 @@ struct cfg80211_tid_stats {
  * @rx_beacon: number of beacons received from this peer
  * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received
  *	from this peer
+ * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer
  * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
  *	(IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
  */
 struct station_info {
-	u32 filled;
+	u64 filled;
 	u32 connected_time;
 	u32 inactive_time;
 	u64 rx_bytes;
@@ -1088,6 +1089,7 @@ struct station_info {
 	u32 expected_throughput;
 
 	u64 rx_beacon;
+	u64 rx_duration;
 	u8 rx_beacon_signal_avg;
 	struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1];
 };
@@ -3187,6 +3189,9 @@ struct wiphy_vendor_command {
  * @vht_capa_mod_mask:  Specify what VHT capabilities can be over-ridden.
  *	If null, then none can be over-ridden.
  *
+ * @wdev_list: the list of associated (virtual) interfaces; this list must
+ *	not be modified by the driver, but can be read with RTNL/RCU protection.
+ *
  * @max_acl_mac_addrs: Maximum number of MAC addresses that the device
  *	supports for ACL.
  *
@@ -3326,6 +3331,8 @@ struct wiphy {
 	const struct ieee80211_ht_cap *ht_capa_mod_mask;
 	const struct ieee80211_vht_cap *vht_capa_mod_mask;
 
+	struct list_head wdev_list;
+
 	/* the network namespace this phy lives in currently */
 	possible_net_t _net;
 
@@ -3891,7 +3898,7 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
  * cfg80211_find_vendor_ie - find vendor specific information element in data
  *
  * @oui: vendor OUI
- * @oui_type: vendor-specific OUI type
+ * @oui_type: vendor-specific OUI type (must be < 0xff), negative means any
  * @ies: data consisting of IEs
  * @len: length of data
  *
@@ -3903,7 +3910,7 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
  * Note: There are no checks on the element length other than having to fit into
  * the given data.
  */
-const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
+const u8 *cfg80211_find_vendor_ie(unsigned int oui, int oui_type,
 				  const u8 *ies, int len);
 
 /**
@@ -4650,6 +4657,32 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
 #endif
 
 /**
+ * cfg80211_connect_bss - notify cfg80211 of connection result
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the AP
+ * @bss: entry of bss to which STA got connected to, can be obtained
+ *	through cfg80211_get_bss (may be %NULL)
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @status: status code, 0 for successful connection, use
+ *      %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
+ *      the real status code for failures.
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever connect() has
+ * succeeded. This is similar to cfg80211_connect_result(), but with the
+ * option of identifying the exact bss entry for the connection. Only one of
+ * these functions should be called.
+ */
+void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
+			  struct cfg80211_bss *bss, const u8 *req_ie,
+			  size_t req_ie_len, const u8 *resp_ie,
+			  size_t resp_ie_len, u16 status, gfp_t gfp);
+
+/**
  * cfg80211_connect_result - notify cfg80211 of connection result
  *
  * @dev: network device
@@ -4666,10 +4699,15 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
  * It should be called by the underlying driver whenever connect() has
  * succeeded.
  */
-void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
-			     const u8 *req_ie, size_t req_ie_len,
-			     const u8 *resp_ie, size_t resp_ie_len,
-			     u16 status, gfp_t gfp);
+static inline void
+cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
+			const u8 *req_ie, size_t req_ie_len,
+			const u8 *resp_ie, size_t resp_ie_len,
+			u16 status, gfp_t gfp)
+{
+	cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, resp_ie,
+			     resp_ie_len, status, gfp);
+}
 
 /**
  * cfg80211_roamed - notify cfg80211 of roaming
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 07ef9378df2b..be30b0549b88 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1068,6 +1068,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_RADIOTAP_VENDOR_DATA: This frame contains vendor-specific
  *	radiotap data in the skb->data (before the frame) as described by
  *	the &struct ieee80211_vendor_radiotap.
+ * @RX_FLAG_ALLOW_SAME_PN: Allow the same PN as same packet before.
+ *	This is used for AMSDU subframes which can have the same PN as
+ *	the first subframe.
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -1101,7 +1104,8 @@ enum mac80211_rx_flags {
 	RX_FLAG_5MHZ			= BIT(29),
 	RX_FLAG_AMSDU_MORE		= BIT(30),
 	RX_FLAG_RADIOTAP_VENDOR_DATA	= BIT(31),
-	RX_FLAG_MIC_STRIPPED            = BIT_ULL(32),
+	RX_FLAG_MIC_STRIPPED		= BIT_ULL(32),
+	RX_FLAG_ALLOW_SAME_PN		= BIT_ULL(33),
 };
 
 #define RX_FLAG_STBC_SHIFT		26
@@ -3992,6 +3996,33 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
 	return ret;
 }
 
+/**
+ * ieee80211_sta_pspoll - PS-Poll frame received
+ * @sta: currently connected station
+ *
+ * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS flag set,
+ * use this function to inform mac80211 that a PS-Poll frame from a
+ * connected station was received.
+ * This must be used in conjunction with ieee80211_sta_ps_transition()
+ * and possibly ieee80211_sta_uapsd_trigger(); calls to all three must
+ * be serialized.
+ */
+void ieee80211_sta_pspoll(struct ieee80211_sta *sta);
+
+/**
+ * ieee80211_sta_uapsd_trigger - (potential) U-APSD trigger frame received
+ * @sta: currently connected station
+ * @tid: TID of the received (potential) trigger frame
+ *
+ * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS flag set,
+ * use this function to inform mac80211 that a (potential) trigger frame
+ * from a connected station was received.
+ * This must be used in conjunction with ieee80211_sta_ps_transition()
+ * and possibly ieee80211_sta_pspoll(); calls to all three must be
+ * serialized.
+ */
+void ieee80211_sta_uapsd_trigger(struct ieee80211_sta *sta, u8 tid);
+
 /*
  * The TX headroom reserved by mac80211 for its own tx_status functions.
  * This is enough for the radiotap header.
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 2c55dd1894c3..e23d78685a01 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1817,6 +1817,8 @@ enum nl80211_commands {
  * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
  *	or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
  *
+ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2513,6 +2515,9 @@ enum nl80211_sta_bss_param {
  *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
  *	each one of those is again nested with &enum nl80211_tid_stats
  *	attributes carrying the actual values.
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
+ *	received from the station (u64, usec)
+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -2549,6 +2554,8 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_BEACON_RX,
 	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
 	NL80211_STA_INFO_TID_STATS,
+	NL80211_STA_INFO_RX_DURATION,
+	NL80211_STA_INFO_PAD,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -2565,6 +2572,7 @@ enum nl80211_sta_info {
  *	transmitted MSDUs (not counting the first attempt; u64)
  * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
  *	MSDUs (u64)
+ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
  * @NUM_NL80211_TID_STATS: number of attributes here
  * @NL80211_TID_STATS_MAX: highest numbered attribute here
  */
@@ -2574,6 +2582,7 @@ enum nl80211_tid_stats {
 	NL80211_TID_STATS_TX_MSDU,
 	NL80211_TID_STATS_TX_MSDU_RETRIES,
 	NL80211_TID_STATS_TX_MSDU_FAILED,
+	NL80211_TID_STATS_PAD,
 
 	/* keep last */
 	NUM_NL80211_TID_STATS,
@@ -3010,6 +3019,7 @@ enum nl80211_user_reg_hint_type {
  *	transmitting data (on channel or globally)
  * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
  *	(on this channel or globally)
+ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *	currently defined
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -3451,6 +3461,7 @@ enum nl80211_bss_scan_width {
  * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
  *	was last updated by a received frame. The value is expected to be
  *	accurate to about 10ms. (u64, nanoseconds)
+ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */