summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-01-06 18:32:12 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2011-01-06 18:32:12 -0800
commit9e9bc9736756f25d6c47b4eba0ebf25b20a6f153 (patch)
tree647240f479c5f23910c3e6194d1c35b6ba54d75e /include
parent3c0cb7c31c206aaedb967e44b98442bbeb17a6c4 (diff)
parente3c92215198cb6aa00ad38db2780faa6b72e0a3f (diff)
downloadlinux-9e9bc9736756f25d6c47b4eba0ebf25b20a6f153.tar.bz2
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (255 commits) [media] radio-aimslab.c: Fix gcc 4.5+ bug [media] cx25821: Fix compilation breakage due to BKL dependency [media] v4l2-compat-ioctl32: fix compile warning [media] zoran: fix compiler warning [media] tda18218: fix compile warning [media] ngene: fix compile warning [media] DVB: IR support for TechnoTrend CT-3650 [media] cx23885, cimax2.c: Fix case of two CAM insertion irq [media] ir-nec-decoder: fix repeat key issue [media] staging: se401 depends on USB [media] staging: usbvideo/vicam depends on USB [media] soc_camera: Add the ability to bind regulators to soc_camedra devices [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor [media] v4l: soc-camera: switch to .unlocked_ioctl [media] v4l: ov772x: simplify pointer dereference [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrieving [media] ov9640: use macro to request OmniVision OV9640 sensor private data [media] ivtv-i2c: Fix two warnings [media] staging/lirc: Update lirc TODO files [media] cx88: Remove the obsolete i2c_adapter.id field ...
Diffstat (limited to 'include')
-rw-r--r--include/linux/Kbuild1
-rw-r--r--include/linux/input.h2
-rw-r--r--include/linux/mfd/wl1273-core.h288
-rw-r--r--include/linux/videodev.h340
-rw-r--r--include/media/bt819.h5
-rw-r--r--include/media/cx2341x.h2
-rw-r--r--include/media/ir-common.h107
-rw-r--r--include/media/ir-core.h214
-rw-r--r--include/media/ir-kbd-i2c.h13
-rw-r--r--include/media/lirc_dev.h6
-rw-r--r--include/media/ovcamchip.h90
-rw-r--r--include/media/rc-core.h220
-rw-r--r--include/media/rc-map.h44
-rw-r--r--include/media/saa6588.h (renamed from include/media/rds.h)18
-rw-r--r--include/media/si4713.h3
-rw-r--r--include/media/soc_camera.h5
-rw-r--r--include/media/timb_radio.h1
-rw-r--r--include/media/timb_video.h33
-rw-r--r--include/media/v4l2-chip-ident.h1
-rw-r--r--include/media/v4l2-common.h6
-rw-r--r--include/media/v4l2-ctrls.h4
-rw-r--r--include/media/v4l2-ioctl.h22
-rw-r--r--include/media/videobuf-core.h8
23 files changed, 604 insertions, 829 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 97319a8fc1e0..a354c199ab98 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -367,7 +367,6 @@ header-y += utime.h
header-y += utsname.h
header-y += veth.h
header-y += vhost.h
-header-y += videodev.h
header-y += videodev2.h
header-y += virtio_9p.h
header-y += virtio_balloon.h
diff --git a/include/linux/input.h b/include/linux/input.h
index 9777668883be..f7a6e1966df3 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -590,6 +590,8 @@ struct input_keymap_entry {
#define KEY_FRAMEFORWARD 0x1b5
#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
+#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
diff --git a/include/linux/mfd/wl1273-core.h b/include/linux/mfd/wl1273-core.h
new file mode 100644
index 000000000000..9787293eae5f
--- /dev/null
+++ b/include/linux/mfd/wl1273-core.h
@@ -0,0 +1,288 @@
+/*
+ * include/linux/mfd/wl1273-core.h
+ *
+ * Some definitions for the wl1273 radio receiver/transmitter chip.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Author: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef WL1273_CORE_H
+#define WL1273_CORE_H
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+
+#define WL1273_FM_DRIVER_NAME "wl1273-fm"
+#define RX71_FM_I2C_ADDR 0x22
+
+#define WL1273_STEREO_GET 0
+#define WL1273_RSSI_LVL_GET 1
+#define WL1273_IF_COUNT_GET 2
+#define WL1273_FLAG_GET 3
+#define WL1273_RDS_SYNC_GET 4
+#define WL1273_RDS_DATA_GET 5
+#define WL1273_FREQ_SET 10
+#define WL1273_AF_FREQ_SET 11
+#define WL1273_MOST_MODE_SET 12
+#define WL1273_MOST_BLEND_SET 13
+#define WL1273_DEMPH_MODE_SET 14
+#define WL1273_SEARCH_LVL_SET 15
+#define WL1273_BAND_SET 16
+#define WL1273_MUTE_STATUS_SET 17
+#define WL1273_RDS_PAUSE_LVL_SET 18
+#define WL1273_RDS_PAUSE_DUR_SET 19
+#define WL1273_RDS_MEM_SET 20
+#define WL1273_RDS_BLK_B_SET 21
+#define WL1273_RDS_MSK_B_SET 22
+#define WL1273_RDS_PI_MASK_SET 23
+#define WL1273_RDS_PI_SET 24
+#define WL1273_RDS_SYSTEM_SET 25
+#define WL1273_INT_MASK_SET 26
+#define WL1273_SEARCH_DIR_SET 27
+#define WL1273_VOLUME_SET 28
+#define WL1273_AUDIO_ENABLE 29
+#define WL1273_PCM_MODE_SET 30
+#define WL1273_I2S_MODE_CONFIG_SET 31
+#define WL1273_POWER_SET 32
+#define WL1273_INTX_CONFIG_SET 33
+#define WL1273_PULL_EN_SET 34
+#define WL1273_HILO_SET 35
+#define WL1273_SWITCH2FREF 36
+#define WL1273_FREQ_DRIFT_REPORT 37
+
+#define WL1273_PCE_GET 40
+#define WL1273_FIRM_VER_GET 41
+#define WL1273_ASIC_VER_GET 42
+#define WL1273_ASIC_ID_GET 43
+#define WL1273_MAN_ID_GET 44
+#define WL1273_TUNER_MODE_SET 45
+#define WL1273_STOP_SEARCH 46
+#define WL1273_RDS_CNTRL_SET 47
+
+#define WL1273_WRITE_HARDWARE_REG 100
+#define WL1273_CODE_DOWNLOAD 101
+#define WL1273_RESET 102
+
+#define WL1273_FM_POWER_MODE 254
+#define WL1273_FM_INTERRUPT 255
+
+/* Transmitter API */
+
+#define WL1273_CHANL_SET 55
+#define WL1273_SCAN_SPACING_SET 56
+#define WL1273_REF_SET 57
+#define WL1273_POWER_ENB_SET 90
+#define WL1273_POWER_ATT_SET 58
+#define WL1273_POWER_LEV_SET 59
+#define WL1273_AUDIO_DEV_SET 60
+#define WL1273_PILOT_DEV_SET 61
+#define WL1273_RDS_DEV_SET 62
+#define WL1273_PUPD_SET 91
+#define WL1273_AUDIO_IO_SET 63
+#define WL1273_PREMPH_SET 64
+#define WL1273_MONO_SET 66
+#define WL1273_MUTE 92
+#define WL1273_MPX_LMT_ENABLE 67
+#define WL1273_PI_SET 93
+#define WL1273_ECC_SET 69
+#define WL1273_PTY 70
+#define WL1273_AF 71
+#define WL1273_DISPLAY_MODE 74
+#define WL1273_RDS_REP_SET 77
+#define WL1273_RDS_CONFIG_DATA_SET 98
+#define WL1273_RDS_DATA_SET 99
+#define WL1273_RDS_DATA_ENB 94
+#define WL1273_TA_SET 78
+#define WL1273_TP_SET 79
+#define WL1273_DI_SET 80
+#define WL1273_MS_SET 81
+#define WL1273_PS_SCROLL_SPEED 82
+#define WL1273_TX_AUDIO_LEVEL_TEST 96
+#define WL1273_TX_AUDIO_LEVEL_TEST_THRESHOLD 73
+#define WL1273_TX_AUDIO_INPUT_LEVEL_RANGE_SET 54
+#define WL1273_RX_ANTENNA_SELECT 87
+#define WL1273_I2C_DEV_ADDR_SET 86
+#define WL1273_REF_ERR_CALIB_PARAM_SET 88
+#define WL1273_REF_ERR_CALIB_PERIODICITY_SET 89
+#define WL1273_SOC_INT_TRIGGER 52
+#define WL1273_SOC_AUDIO_PATH_SET 83
+#define WL1273_SOC_PCMI_OVERRIDE 84
+#define WL1273_SOC_I2S_OVERRIDE 85
+#define WL1273_RSSI_BLOCK_SCAN_FREQ_SET 95
+#define WL1273_RSSI_BLOCK_SCAN_START 97
+#define WL1273_RSSI_BLOCK_SCAN_DATA_GET 5
+#define WL1273_READ_FMANT_TUNE_VALUE 104
+
+#define WL1273_RDS_OFF 0
+#define WL1273_RDS_ON 1
+#define WL1273_RDS_RESET 2
+
+#define WL1273_AUDIO_DIGITAL 0
+#define WL1273_AUDIO_ANALOG 1
+
+#define WL1273_MODE_RX BIT(0)
+#define WL1273_MODE_TX BIT(1)
+#define WL1273_MODE_OFF BIT(2)
+#define WL1273_MODE_SUSPENDED BIT(3)
+
+#define WL1273_RADIO_CHILD BIT(0)
+#define WL1273_CODEC_CHILD BIT(1)
+
+#define WL1273_RX_MONO 1
+#define WL1273_RX_STEREO 0
+#define WL1273_TX_MONO 0
+#define WL1273_TX_STEREO 1
+
+#define WL1273_MAX_VOLUME 0xffff
+#define WL1273_DEFAULT_VOLUME 0x78b8
+
+/* I2S protocol, left channel first, data width 16 bits */
+#define WL1273_PCM_DEF_MODE 0x00
+
+/* Rx */
+#define WL1273_AUDIO_ENABLE_I2S BIT(0)
+#define WL1273_AUDIO_ENABLE_ANALOG BIT(1)
+
+/* Tx */
+#define WL1273_AUDIO_IO_SET_ANALOG 0
+#define WL1273_AUDIO_IO_SET_I2S 1
+
+#define WL1273_PUPD_SET_OFF 0x00
+#define WL1273_PUPD_SET_ON 0x01
+#define WL1273_PUPD_SET_RETENTION 0x10
+
+/* I2S mode */
+#define WL1273_IS2_WIDTH_32 0x0
+#define WL1273_IS2_WIDTH_40 0x1
+#define WL1273_IS2_WIDTH_22_23 0x2
+#define WL1273_IS2_WIDTH_23_22 0x3
+#define WL1273_IS2_WIDTH_48 0x4
+#define WL1273_IS2_WIDTH_50 0x5
+#define WL1273_IS2_WIDTH_60 0x6
+#define WL1273_IS2_WIDTH_64 0x7
+#define WL1273_IS2_WIDTH_80 0x8
+#define WL1273_IS2_WIDTH_96 0x9
+#define WL1273_IS2_WIDTH_128 0xa
+#define WL1273_IS2_WIDTH 0xf
+
+#define WL1273_IS2_FORMAT_STD (0x0 << 4)
+#define WL1273_IS2_FORMAT_LEFT (0x1 << 4)
+#define WL1273_IS2_FORMAT_RIGHT (0x2 << 4)
+#define WL1273_IS2_FORMAT_USER (0x3 << 4)
+
+#define WL1273_IS2_MASTER (0x0 << 6)
+#define WL1273_IS2_SLAVEW (0x1 << 6)
+
+#define WL1273_IS2_TRI_AFTER_SENDING (0x0 << 7)
+#define WL1273_IS2_TRI_ALWAYS_ACTIVE (0x1 << 7)
+
+#define WL1273_IS2_SDOWS_RR (0x0 << 8)
+#define WL1273_IS2_SDOWS_RF (0x1 << 8)
+#define WL1273_IS2_SDOWS_FR (0x2 << 8)
+#define WL1273_IS2_SDOWS_FF (0x3 << 8)
+
+#define WL1273_IS2_TRI_OPT (0x0 << 10)
+#define WL1273_IS2_TRI_ALWAYS (0x1 << 10)
+
+#define WL1273_IS2_RATE_48K (0x0 << 12)
+#define WL1273_IS2_RATE_44_1K (0x1 << 12)
+#define WL1273_IS2_RATE_32K (0x2 << 12)
+#define WL1273_IS2_RATE_22_05K (0x4 << 12)
+#define WL1273_IS2_RATE_16K (0x5 << 12)
+#define WL1273_IS2_RATE_12K (0x8 << 12)
+#define WL1273_IS2_RATE_11_025 (0x9 << 12)
+#define WL1273_IS2_RATE_8K (0xa << 12)
+#define WL1273_IS2_RATE (0xf << 12)
+
+#define WL1273_I2S_DEF_MODE (WL1273_IS2_WIDTH_32 | \
+ WL1273_IS2_FORMAT_STD | \
+ WL1273_IS2_MASTER | \
+ WL1273_IS2_TRI_AFTER_SENDING | \
+ WL1273_IS2_SDOWS_RR | \
+ WL1273_IS2_TRI_OPT | \
+ WL1273_IS2_RATE_48K)
+
+#define SCHAR_MIN (-128)
+#define SCHAR_MAX 127
+
+#define WL1273_FR_EVENT BIT(0)
+#define WL1273_BL_EVENT BIT(1)
+#define WL1273_RDS_EVENT BIT(2)
+#define WL1273_BBLK_EVENT BIT(3)
+#define WL1273_LSYNC_EVENT BIT(4)
+#define WL1273_LEV_EVENT BIT(5)
+#define WL1273_IFFR_EVENT BIT(6)
+#define WL1273_PI_EVENT BIT(7)
+#define WL1273_PD_EVENT BIT(8)
+#define WL1273_STIC_EVENT BIT(9)
+#define WL1273_MAL_EVENT BIT(10)
+#define WL1273_POW_ENB_EVENT BIT(11)
+#define WL1273_SCAN_OVER_EVENT BIT(12)
+#define WL1273_ERROR_EVENT BIT(13)
+
+#define TUNER_MODE_STOP_SEARCH 0
+#define TUNER_MODE_PRESET 1
+#define TUNER_MODE_AUTO_SEEK 2
+#define TUNER_MODE_AF 3
+#define TUNER_MODE_AUTO_SEEK_PI 4
+#define TUNER_MODE_AUTO_SEEK_BULK 5
+
+#define RDS_BLOCK_SIZE 3
+
+struct wl1273_fm_platform_data {
+ int (*request_resources) (struct i2c_client *client);
+ void (*free_resources) (void);
+ void (*enable) (void);
+ void (*disable) (void);
+
+ u8 forbidden_modes;
+ unsigned int children;
+};
+
+#define WL1273_FM_CORE_CELLS 2
+
+#define WL1273_BAND_OTHER 0
+#define WL1273_BAND_JAPAN 1
+
+#define WL1273_BAND_JAPAN_LOW 76000
+#define WL1273_BAND_JAPAN_HIGH 90000
+#define WL1273_BAND_OTHER_LOW 87500
+#define WL1273_BAND_OTHER_HIGH 108000
+
+#define WL1273_BAND_TX_LOW 76000
+#define WL1273_BAND_TX_HIGH 108000
+
+struct wl1273_core {
+ struct mfd_cell cells[WL1273_FM_CORE_CELLS];
+ struct wl1273_fm_platform_data *pdata;
+
+ unsigned int mode;
+ unsigned int i2s_mode;
+ unsigned int volume;
+ unsigned int audio_mode;
+ unsigned int channel_number;
+ struct mutex lock; /* for serializing fm radio operations */
+
+ struct i2c_client *client;
+
+ int (*write)(struct wl1273_core *core, u8, u16);
+ int (*set_audio)(struct wl1273_core *core, unsigned int);
+ int (*set_volume)(struct wl1273_core *core, unsigned int);
+};
+
+#endif /* ifndef WL1273_CORE_H */
diff --git a/include/linux/videodev.h b/include/linux/videodev.h
deleted file mode 100644
index b19eab140977..000000000000
--- a/include/linux/videodev.h
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Video for Linux version 1 - OBSOLETE
- *
- * Header file for v4l1 drivers and applications, for
- * Linux kernels 2.2.x or 2.4.x.
- *
- * Provides header for legacy drivers and applications
- *
- * See http://linuxtv.org for more info
- *
- */
-#ifndef __LINUX_VIDEODEV_H
-#define __LINUX_VIDEODEV_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/videodev2.h>
-
-#if defined(__MIN_V4L1) && defined (__KERNEL__)
-
-/*
- * Used by those V4L2 core functions that need a minimum V4L1 support,
- * in order to allow V4L1 Compatibilty code compilation.
- */
-
-struct video_mbuf
-{
- int size; /* Total memory to map */
- int frames; /* Frames */
- int offsets[VIDEO_MAX_FRAME];
-};
-
-#define VIDIOCGMBUF _IOR('v',20, struct video_mbuf) /* Memory map buffer info */
-
-#else
-#if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__)
-
-#define VID_TYPE_CAPTURE 1 /* Can capture */
-#define VID_TYPE_TUNER 2 /* Can tune */
-#define VID_TYPE_TELETEXT 4 /* Does teletext */
-#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */
-#define VID_TYPE_CLIPPING 32 /* Can clip */
-#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */
-#define VID_TYPE_SCALES 128 /* Scalable */
-#define VID_TYPE_MONOCHROME 256 /* Monochrome only */
-#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */
-
-struct video_capability
-{
- char name[32];
- int type;
- int channels; /* Num channels */
- int audios; /* Num audio devices */
- int maxwidth; /* Supported width */
- int maxheight; /* And height */
- int minwidth; /* Supported width */
- int minheight; /* And height */
-};
-
-
-struct video_channel
-{
- int channel;
- char name[32];
- int tuners;
- __u32 flags;
-#define VIDEO_VC_TUNER 1 /* Channel has a tuner */
-#define VIDEO_VC_AUDIO 2 /* Channel has audio */
- __u16 type;
-#define VIDEO_TYPE_TV 1
-#define VIDEO_TYPE_CAMERA 2
- __u16 norm; /* Norm set by channel */
-};
-
-struct video_tuner
-{
- int tuner;
- char name[32];
- unsigned long rangelow, rangehigh; /* Tuner range */
- __u32 flags;
-#define VIDEO_TUNER_PAL 1
-#define VIDEO_TUNER_NTSC 2
-#define VIDEO_TUNER_SECAM 4
-#define VIDEO_TUNER_LOW 8 /* Uses KHz not MHz */
-#define VIDEO_TUNER_NORM 16 /* Tuner can set norm */
-#define VIDEO_TUNER_STEREO_ON 128 /* Tuner is seeing stereo */
-#define VIDEO_TUNER_RDS_ON 256 /* Tuner is seeing an RDS datastream */
-#define VIDEO_TUNER_MBS_ON 512 /* Tuner is seeing an MBS datastream */
- __u16 mode; /* PAL/NTSC/SECAM/OTHER */
-#define VIDEO_MODE_PAL 0
-#define VIDEO_MODE_NTSC 1
-#define VIDEO_MODE_SECAM 2
-#define VIDEO_MODE_AUTO 3
- __u16 signal; /* Signal strength 16bit scale */
-};
-
-struct video_picture
-{
- __u16 brightness;
- __u16 hue;
- __u16 colour;
- __u16 contrast;
- __u16 whiteness; /* Black and white only */
- __u16 depth; /* Capture depth */
- __u16 palette; /* Palette in use */
-#define VIDEO_PALETTE_GREY 1 /* Linear greyscale */
-#define VIDEO_PALETTE_HI240 2 /* High 240 cube (BT848) */
-#define VIDEO_PALETTE_RGB565 3 /* 565 16 bit RGB */
-#define VIDEO_PALETTE_RGB24 4 /* 24bit RGB */
-#define VIDEO_PALETTE_RGB32 5 /* 32bit RGB */
-#define VIDEO_PALETTE_RGB555 6 /* 555 15bit RGB */
-#define VIDEO_PALETTE_YUV422 7 /* YUV422 capture */
-#define VIDEO_PALETTE_YUYV 8
-#define VIDEO_PALETTE_UYVY 9 /* The great thing about standards is ... */
-#define VIDEO_PALETTE_YUV420 10
-#define VIDEO_PALETTE_YUV411 11 /* YUV411 capture */
-#define VIDEO_PALETTE_RAW 12 /* RAW capture (BT848) */
-#define VIDEO_PALETTE_YUV422P 13 /* YUV 4:2:2 Planar */
-#define VIDEO_PALETTE_YUV411P 14 /* YUV 4:1:1 Planar */
-#define VIDEO_PALETTE_YUV420P 15 /* YUV 4:2:0 Planar */
-#define VIDEO_PALETTE_YUV410P 16 /* YUV 4:1:0 Planar */
-#define VIDEO_PALETTE_PLANAR 13 /* start of planar entries */
-#define VIDEO_PALETTE_COMPONENT 7 /* start of component entries */
-};
-
-struct video_audio
-{
- int audio; /* Audio channel */
- __u16 volume; /* If settable */
- __u16 bass, treble;
- __u32 flags;
-#define VIDEO_AUDIO_MUTE 1
-#define VIDEO_AUDIO_MUTABLE 2
-#define VIDEO_AUDIO_VOLUME 4
-#define VIDEO_AUDIO_BASS 8
-#define VIDEO_AUDIO_TREBLE 16
-#define VIDEO_AUDIO_BALANCE 32
- char name[16];
-#define VIDEO_SOUND_MONO 1
-#define VIDEO_SOUND_STEREO 2
-#define VIDEO_SOUND_LANG1 4
-#define VIDEO_SOUND_LANG2 8
- __u16 mode;
- __u16 balance; /* Stereo balance */
- __u16 step; /* Step actual volume uses */
-};
-
-struct video_clip
-{
- __s32 x,y;
- __s32 width, height;
- struct video_clip *next; /* For user use/driver use only */
-};
-
-struct video_window
-{
- __u32 x,y; /* Position of window */
- __u32 width,height; /* Its size */
- __u32 chromakey;
- __u32 flags;
- struct video_clip __user *clips; /* Set only */
- int clipcount;
-#define VIDEO_WINDOW_INTERLACE 1
-#define VIDEO_WINDOW_CHROMAKEY 16 /* Overlay by chromakey */
-#define VIDEO_CLIP_BITMAP -1
-/* bitmap is 1024x625, a '1' bit represents a clipped pixel */
-#define VIDEO_CLIPMAP_SIZE (128 * 625)
-};
-
-struct video_capture
-{
- __u32 x,y; /* Offsets into image */
- __u32 width, height; /* Area to capture */
- __u16 decimation; /* Decimation divider */
- __u16 flags; /* Flags for capture */
-#define VIDEO_CAPTURE_ODD 0 /* Temporal */
-#define VIDEO_CAPTURE_EVEN 1
-};
-
-struct video_buffer
-{
- void *base;
- int height,width;
- int depth;
- int bytesperline;
-};
-
-struct video_mmap
-{
- unsigned int frame; /* Frame (0 - n) for double buffer */
- int height,width;
- unsigned int format; /* should be VIDEO_PALETTE_* */
-};
-
-struct video_key
-{
- __u8 key[8];
- __u32 flags;
-};
-
-struct video_mbuf
-{
- int size; /* Total memory to map */
- int frames; /* Frames */
- int offsets[VIDEO_MAX_FRAME];
-};
-
-#define VIDEO_NO_UNIT (-1)
-
-struct video_unit
-{
- int video; /* Video minor */
- int vbi; /* VBI minor */
- int radio; /* Radio minor */
- int audio; /* Audio minor */
- int teletext; /* Teletext minor */
-};
-
-struct vbi_format {
- __u32 sampling_rate; /* in Hz */
- __u32 samples_per_line;
- __u32 sample_format; /* VIDEO_PALETTE_RAW only (1 byte) */
- __s32 start[2]; /* starting line for each frame */
- __u32 count[2]; /* count of lines for each frame */
- __u32 flags;
-#define VBI_UNSYNC 1 /* can distingues between top/bottom field */
-#define VBI_INTERLACED 2 /* lines are interlaced */
-};
-
-/* video_info is biased towards hardware mpeg encode/decode */
-/* but it could apply generically to any hardware compressor/decompressor */
-struct video_info
-{
- __u32 frame_count; /* frames output since decode/encode began */
- __u32 h_size; /* current unscaled horizontal size */
- __u32 v_size; /* current unscaled veritcal size */
- __u32 smpte_timecode; /* current SMPTE timecode (for current GOP) */
- __u32 picture_type; /* current picture type */
- __u32 temporal_reference; /* current temporal reference */
- __u8 user_data[256]; /* user data last found in compressed stream */
- /* user_data[0] contains user data flags, user_data[1] has count */
-};
-
-/* generic structure for setting playback modes */
-struct video_play_mode
-{
- int mode;
- int p1;
- int p2;
-};
-
-/* for loading microcode / fpga programming */
-struct video_code
-{
- char loadwhat[16]; /* name or tag of file being passed */
- int datasize;
- __u8 *data;
-};
-
-#define VIDIOCGCAP _IOR('v',1,struct video_capability) /* Get capabilities */
-#define VIDIOCGCHAN _IOWR('v',2,struct video_channel) /* Get channel info (sources) */
-#define VIDIOCSCHAN _IOW('v',3,struct video_channel) /* Set channel */
-#define VIDIOCGTUNER _IOWR('v',4,struct video_tuner) /* Get tuner abilities */
-#define VIDIOCSTUNER _IOW('v',5,struct video_tuner) /* Tune the tuner for the current channel */
-#define VIDIOCGPICT _IOR('v',6,struct video_picture) /* Get picture properties */
-#define VIDIOCSPICT _IOW('v',7,struct video_picture) /* Set picture properties */
-#define VIDIOCCAPTURE _IOW('v',8,int) /* Start, end capture */
-#define VIDIOCGWIN _IOR('v',9, struct video_window) /* Get the video overlay window */
-#define VIDIOCSWIN _IOW('v',10, struct video_window) /* Set the video overlay window - passes clip list for hardware smarts , chromakey etc */
-#define VIDIOCGFBUF _IOR('v',11, struct video_buffer) /* Get frame buffer */
-#define VIDIOCSFBUF _IOW('v',12, struct video_buffer) /* Set frame buffer - root only */
-#define VIDIOCKEY _IOR('v',13, struct video_key) /* Video key event - to dev 255 is to all - cuts capture on all DMA windows with this key (0xFFFFFFFF == all) */
-#define VIDIOCGFREQ _IOR('v',14, unsigned long) /* Set tuner */
-#define VIDIOCSFREQ _IOW('v',15, unsigned long) /* Set tuner */
-#define VIDIOCGAUDIO _IOR('v',16, struct video_audio) /* Get audio info */
-#define VIDIOCSAUDIO _IOW('v',17, struct video_audio) /* Audio source, mute etc */
-#define VIDIOCSYNC _IOW('v',18, int) /* Sync with mmap grabbing */
-#define VIDIOCMCAPTURE _IOW('v',19, struct video_mmap) /* Grab frames */
-#define VIDIOCGMBUF _IOR('v',20, struct video_mbuf) /* Memory map buffer info */
-#define VIDIOCGUNIT _IOR('v',21, struct video_unit) /* Get attached units */
-#define VIDIOCGCAPTURE _IOR('v',22, struct video_capture) /* Get subcapture */
-#define VIDIOCSCAPTURE _IOW('v',23, struct video_capture) /* Set subcapture */
-#define VIDIOCSPLAYMODE _IOW('v',24, struct video_play_mode) /* Set output video mode/feature */
-#define VIDIOCSWRITEMODE _IOW('v',25, int) /* Set write mode */
-#define VIDIOCGPLAYINFO _IOR('v',26, struct video_info) /* Get current playback info from hardware */
-#define VIDIOCSMICROCODE _IOW('v',27, struct video_code) /* Load microcode into hardware */
-#define VIDIOCGVBIFMT _IOR('v',28, struct vbi_format) /* Get VBI information */
-#define VIDIOCSVBIFMT _IOW('v',29, struct vbi_format) /* Set VBI information */
-
-
-#define BASE_VIDIOCPRIVATE 192 /* 192-255 are private */
-
-/* VIDIOCSWRITEMODE */
-#define VID_WRITE_MPEG_AUD 0
-#define VID_WRITE_MPEG_VID 1
-#define VID_WRITE_OSD 2
-#define VID_WRITE_TTX 3
-#define VID_WRITE_CC 4
-#define VID_WRITE_MJPEG 5
-
-/* VIDIOCSPLAYMODE */
-#define VID_PLAY_VID_OUT_MODE 0
- /* p1: = VIDEO_MODE_PAL, VIDEO_MODE_NTSC, etc ... */
-#define VID_PLAY_GENLOCK 1
- /* p1: 0 = OFF, 1 = ON */
- /* p2: GENLOCK FINE DELAY value */
-#define VID_PLAY_NORMAL 2
-#define VID_PLAY_PAUSE 3
-#define VID_PLAY_SINGLE_FRAME 4
-#define VID_PLAY_FAST_FORWARD 5
-#define VID_PLAY_SLOW_MOTION 6
-#define VID_PLAY_IMMEDIATE_NORMAL 7
-#define VID_PLAY_SWITCH_CHANNELS 8
-#define VID_PLAY_FREEZE_FRAME 9
-#define VID_PLAY_STILL_MODE 10
-#define VID_PLAY_MASTER_MODE 11
- /* p1: see below */
-#define VID_PLAY_MASTER_NONE 1
-#define VID_PLAY_MASTER_VIDEO 2
-#define VID_PLAY_MASTER_AUDIO 3
-#define VID_PLAY_ACTIVE_SCANLINES 12
- /* p1 = first active; p2 = last active */
-#define VID_PLAY_RESET 13
-#define VID_PLAY_END_MARK 14
-
-#endif /* CONFIG_VIDEO_V4L1_COMPAT */
-#endif /* __MIN_V4L1 */
-
-#endif /* __LINUX_VIDEODEV_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/media/bt819.h b/include/media/bt819.h
index 38f666bde77a..8025f4bc2bb6 100644
--- a/include/media/bt819.h
+++ b/include/media/bt819.h
@@ -26,7 +26,10 @@
/* v4l2_device notifications. */
/* Needed to reset the FIFO buffer when changing the input
- or the video standard. */
+ or the video standard.
+
+ Note: these ioctls that internal to the kernel and are never called
+ from userspace. */
#define BT819_FIFO_RESET_LOW _IO('b', 0)
#define BT819_FIFO_RESET_HIGH _IO('b', 1)
diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h
index 8d08ebfe20b7..9635eebaab09 100644
--- a/include/media/cx2341x.h
+++ b/include/media/cx2341x.h
@@ -95,7 +95,7 @@ int cx2341x_update(void *priv, cx2341x_mbox_func func,
const struct cx2341x_mpeg_params *new);
int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
struct v4l2_queryctrl *qctrl);
-const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
+const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
struct v4l2_ext_controls *ctrls, unsigned int cmd);
void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
deleted file mode 100644
index 528050e39ad9..000000000000
--- a/include/media/ir-common.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *
- * some common structs and functions to handle infrared remotes via
- * input layer ...
- *
- * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _IR_COMMON
-#define _IR_COMMON
-
-#include <linux/input.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <media/ir-core.h>
-
-#define RC5_START(x) (((x)>>12)&3)
-#define RC5_TOGGLE(x) (((x)>>11)&1)
-#define RC5_ADDR(x) (((x)>>6)&31)
-#define RC5_INSTR(x) ((x)&63)
-
-struct ir_input_state {
- /* configuration */
- u64 ir_type;
-
- /* key info */
- u32 ir_key; /* ir scancode */
- u32 keycode; /* linux key code */
- int keypressed; /* current state */
-};
-
-/* this was saa7134_ir and bttv_ir, moved here for
- * rc5 decoding. */
-struct card_ir {
- struct input_dev *dev;
- struct ir_input_state ir;
- char name[32];
- char phys[32];
- int users;
-
- u32 running:1;
- struct ir_dev_props props;
-
- /* Usual gpio signalling */
-
- u32 mask_keycode;
- u32 mask_keydown;
- u32 mask_keyup;
- u32 polling;
- u32 last_gpio;
- int shift_by;
- int start; // What should RC5_START() be
- int addr; // What RC5_ADDR() should be.
- int rc5_key_timeout;
- int rc5_remote_gap;
- struct work_struct work;
- struct timer_list timer;
-
- /* RC5 gpio */
- u32 rc5_gpio;
- struct timer_list timer_end; /* timer_end for code completion */
- struct timer_list timer_keyup; /* timer_end for key release */
- u32 last_rc5; /* last good rc5 code */
- u32 last_bit; /* last raw bit seen */
- u32 code; /* raw code under construction */
- struct timeval base_time; /* time of last seen code */
- int active; /* building raw code */
-
- /* NEC decoding */
- u32 nec_gpio;
- struct tasklet_struct tlet;
-
- /* IR core raw decoding */
- u32 raw_decode;
-};
-
-/* Routines from ir-functions.c */
-
-int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
- const u64 ir_type);
-void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
-void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
- u32 ir_key);
-u32 ir_extract_bits(u32 data, u32 mask);
-int ir_dump_samples(u32 *samples, int count);
-int ir_decode_biphase(u32 *samples, int count, int low, int high);
-int ir_decode_pulsedistance(u32 *samples, int count, int low, int high);
-u32 ir_rc5_decode(unsigned int code);
-
-void ir_rc5_timer_end(unsigned long data);
-void ir_rc5_timer_keyup(unsigned long data);
-
-#endif
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
deleted file mode 100644
index 6dc37fae6606..000000000000
--- a/include/media/ir-core.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Remote Controller core header
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _IR_CORE
-#define _IR_CORE
-
-#include <linux/spinlock.h>
-#include <linux/kfifo.h>
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <media/rc-map.h>
-
-extern int ir_core_debug;
-#define IR_dprintk(level, fmt, arg...) if (ir_core_debug >= level) \
- printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
-
-enum rc_driver_type {
- RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */
- RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */
-};
-
-/**
- * struct ir_dev_props - Allow caller drivers to set special properties
- * @driver_type: specifies if the driver or hardware have already a decoder,
- * or if it needs to use the IR raw event decoders to produce a scancode
- * @allowed_protos: bitmask with the supported IR_TYPE_* protocols
- * @scanmask: some hardware decoders are not capable of providing the full
- * scancode to the application. As this is a hardware limit, we can't do
- * anything with it. Yet, as the same keycode table can be used with other
- * devices, a mask is provided to allow its usage. Drivers should generally
- * leave this field in blank
- * @timeout: optional time after which device stops sending data
- * @min_timeout: minimum timeout supported by device
- * @max_timeout: maximum timeout supported by device
- * @rx_resolution : resolution (in ns) of input sampler
- * @tx_resolution: resolution (in ns) of output sampler
- * @priv: driver-specific data, to be used on the callbacks
- * @change_protocol: allow changing the protocol used on hardware decoders
- * @open: callback to allow drivers to enable polling/irq when IR input device
- * is opened.
- * @close: callback to allow drivers to disable polling/irq when IR input device
- * is opened.
- * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
- * @s_tx_carrier: set transmit carrier frequency
- * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
- * @s_rx_carrier: inform driver about carrier it is expected to handle
- * @tx_ir: transmit IR
- * @s_idle: optional: enable/disable hardware idle mode, upon which,
- device doesn't interrupt host until it sees IR pulses
- * @s_learning_mode: enable wide band receiver used for learning
- * @s_carrier_report: enable carrier reports
- */
-struct ir_dev_props {
- enum rc_driver_type driver_type;
- unsigned long allowed_protos;
- u32 scanmask;
-
- u32 timeout;
- u32 min_timeout;
- u32 max_timeout;
-
- u32 rx_resolution;
- u32 tx_resolution;
-
- void *priv;
- int (*change_protocol)(void *priv, u64 ir_type);
- int (*open)(void *priv);
- void (*close)(void *priv);
- int (*s_tx_mask)(void *priv, u32 mask);
- int (*s_tx_carrier)(void *priv, u32 carrier);
- int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
- int (*s_rx_carrier_range)(void *priv, u32 min, u32 max);
- int (*tx_ir)(void *priv, int *txbuf, u32 n);
- void (*s_idle)(void *priv, bool enable);
- int (*s_learning_mode)(void *priv, int enable);
- int (*s_carrier_report) (void *priv, int enable);
-};
-
-struct ir_input_dev {
- struct device dev; /* device */
- char *driver_name; /* Name of the driver module */
- struct ir_scancode_table rc_tab; /* scan/key table */
- unsigned long devno; /* device number */
- struct ir_dev_props *props; /* Device properties */
- struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */
- struct input_dev *input_dev; /* the input device associated with this device */
- bool idle;
-
- /* key info - needed by IR keycode handlers */
- spinlock_t keylock; /* protects the below members */
- bool keypressed; /* current state */
- unsigned long keyup_jiffies; /* when should the current keypress be released? */
- struct timer_list timer_keyup; /* timer for releasing a keypress */
- u32 last_keycode; /* keycode of last command */
- u32 last_scancode; /* scancode of last command */
- u8 last_toggle; /* toggle of last command */
-};
-
-enum raw_event_type {
- IR_SPACE = (1 << 0),
- IR_PULSE = (1 << 1),
- IR_START_EVENT = (1 << 2),
- IR_STOP_EVENT = (1 << 3),
-};
-
-#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
-
-/* From ir-keytable.c */
-int __ir_input_register(struct input_dev *dev,
- const struct ir_scancode_table *ir_codes,
- struct ir_dev_props *props,
- const char *driver_name);
-
-static inline int ir_input_register(struct input_dev *dev,
- const char *map_name,
- struct ir_dev_props *props,
- const char *driver_name) {
- struct ir_scancode_table *ir_codes;
- struct ir_input_dev *ir_dev;
- int rc;
-
- if (!map_name)
- return -EINVAL;
-
- ir_codes = get_rc_map(map_name);
- if (!ir_codes) {
- ir_codes = get_rc_map(RC_MAP_EMPTY);
-
- if (!ir_codes)
- return -EINVAL;
- }
-
- rc = __ir_input_register(dev, ir_codes, props, driver_name);
- if (rc < 0)
- return -EINVAL;
-
- ir_dev = input_get_drvdata(dev);
-
- if (!rc && ir_dev->props && ir_dev->props->change_protocol)
- rc = ir_dev->props->change_protocol(ir_dev->props->priv,
- ir_codes->ir_type);
-
- return rc;
-}
-
-void ir_input_unregister(struct input_dev *input_dev);
-
-void ir_repeat(struct input_dev *dev);
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keyup(struct ir_input_dev *ir);
-u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
-
-/* From ir-raw-event.c */
-
-struct ir_raw_event {
- union {
- u32 duration;
-
- struct {
- u32 carrier;
- u8 duty_cycle;
- };
- };
-
- unsigned pulse:1;
- unsigned reset:1;
- unsigned timeout:1;
- unsigned carrier_report:1;
-};
-
-#define DEFINE_IR_RAW_EVENT(event) \
- struct ir_raw_event event = { \
- { .duration = 0 } , \
- .pulse = 0, \
- .reset = 0, \
- .timeout = 0, \
- .carrier_report = 0 }
-
-static inline void init_ir_raw_event(struct ir_raw_event *ev)
-{
- memset(ev, 0, sizeof(*ev));
-}
-
-#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
-
-void ir_raw_event_handle(struct input_dev *input_dev);
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
- struct ir_raw_event *ev);
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle);
-
-static inline void ir_raw_event_reset(struct input_dev *input_dev)
-{
- DEFINE_IR_RAW_EVENT(ev);
- ev.reset = true;
-
- ir_raw_event_store(input_dev, &ev);
- ir_raw_event_handle(input_dev);
-}
-
-#endif /* _IR_CORE */
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 557c676ab7dc..768aa77925cd 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -1,7 +1,7 @@
#ifndef _IR_I2C
#define _IR_I2C
-#include <media/ir-common.h>
+#include <media/rc-core.h>
#define DEFAULT_POLLING_INTERVAL 100 /* ms */
@@ -9,11 +9,9 @@ struct IR_i2c;
struct IR_i2c {
char *ir_codes;
-
struct i2c_client *c;
- struct input_dev *input;
- struct ir_input_state ir;
- u64 ir_type;
+ struct rc_dev *rc;
+
/* Used to avoid fast repeating */
unsigned char old;
@@ -39,13 +37,16 @@ enum ir_kbd_get_key_fn {
struct IR_i2c_init_data {
char *ir_codes;
const char *name;
- u64 type; /* IR_TYPE_RC5, etc */
+ u64 type; /* RC_TYPE_RC5, etc */
u32 polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
+
/*
* Specify either a function pointer or a value indicating one of
* ir_kbd_i2c's internal get_key functions
*/
int (*get_key)(struct IR_i2c*, u32*, u32*);
enum ir_kbd_get_key_fn internal_get_key_func;
+
+ struct rc_dev *rc_dev;
};
#endif
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 54780a560d0e..630e702c9511 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -217,9 +217,9 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file);
int lirc_dev_fop_close(struct inode *inode, struct file *file);
unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait);
long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-ssize_t lirc_dev_fop_read(struct file *file, char *buffer, size_t length,
+ssize_t lirc_dev_fop_read(struct file *file, char __user *buffer, size_t length,
loff_t *ppos);
-ssize_t lirc_dev_fop_write(struct file *file, const char *buffer, size_t length,
- loff_t *ppos);
+ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer,
+ size_t length, loff_t *ppos);
#endif
diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h
deleted file mode 100644
index 05b9569ef1c8..000000000000
--- a/include/media/ovcamchip.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* OmniVision* camera chip driver API
- *
- * Copyright (c) 1999-2004 Mark McClelland
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- *
- * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
- * is not sponsored or developed by them.
- */
-
-#ifndef __LINUX_OVCAMCHIP_H
-#define __LINUX_OVCAMCHIP_H
-
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-
-/* --------------------------------- */
-/* ENUMERATIONS */
-/* --------------------------------- */
-
-/* Controls */
-enum {
- OVCAMCHIP_CID_CONT, /* Contrast */
- OVCAMCHIP_CID_BRIGHT, /* Brightness */
- OVCAMCHIP_CID_SAT, /* Saturation */
- OVCAMCHIP_CID_HUE, /* Hue */
- OVCAMCHIP_CID_EXP, /* Exposure */
- OVCAMCHIP_CID_FREQ, /* Light frequency */
- OVCAMCHIP_CID_BANDFILT, /* Banding filter */
- OVCAMCHIP_CID_AUTOBRIGHT, /* Auto brightness */
- OVCAMCHIP_CID_AUTOEXP, /* Auto exposure */
- OVCAMCHIP_CID_BACKLIGHT, /* Back light compensation */
- OVCAMCHIP_CID_MIRROR, /* Mirror horizontally */
-};
-
-/* Chip types */
-#define NUM_CC_TYPES 9
-enum {
- CC_UNKNOWN,
- CC_OV76BE,
- CC_OV7610,
- CC_OV7620,
- CC_OV7620AE,
- CC_OV6620,
- CC_OV6630,
- CC_OV6630AE,
- CC_OV6630AF,
-};
-
-/* --------------------------------- */
-/* I2C ADDRESSES */
-/* --------------------------------- */
-
-#define OV7xx0_SID (0x42 >> 1)
-#define OV6xx0_SID (0xC0 >> 1)
-
-/* --------------------------------- */
-/* API */
-/* --------------------------------- */
-
-struct ovcamchip_control {
- __u32 id;
- __s32 value;
-};
-
-struct ovcamchip_window {
- int x;
- int y;
- int width;
- int height;
- int format;
- int quarter; /* Scale width and height down 2x */
-
- /* This stuff will be removed eventually */
- int clockdiv; /* Clock divisor setting */
-};
-
-/* Commands */
-#define OVCAMCHIP_CMD_Q_SUBTYPE _IOR (0x88, 0x00, int)
-#define OVCAMCHIP_CMD_INITIALIZE _IOW (0x88, 0x01, int)
-/* You must call OVCAMCHIP_CMD_INITIALIZE before any of commands below! */
-#define OVCAMCHIP_CMD_S_CTRL _IOW (0x88, 0x02, struct ovcamchip_control)
-#define OVCAMCHIP_CMD_G_CTRL _IOWR (0x88, 0x03, struct ovcamchip_control)
-#define OVCAMCHIP_CMD_S_MODE _IOW (0x88, 0x04, struct ovcamchip_window)
-#define OVCAMCHIP_MAX_CMD _IO (0x88, 0x3f)
-
-#endif
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
new file mode 100644
index 000000000000..a23c1fc685a1
--- /dev/null
+++ b/include/media/rc-core.h
@@ -0,0 +1,220 @@
+/*
+ * Remote Controller core header
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _RC_CORE
+#define _RC_CORE
+
+#include <linux/spinlock.h>
+#include <linux/kfifo.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <media/rc-map.h>
+
+extern int rc_core_debug;
+#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
+
+enum rc_driver_type {
+ RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */
+ RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */
+};
+
+/**
+ * struct rc_dev - represents a remote control device
+ * @dev: driver model's view of this device
+ * @input_name: name of the input child device
+ * @input_phys: physical path to the input child device
+ * @input_id: id of the input child device (struct input_id)
+ * @driver_name: name of the hardware driver which registered this device
+ * @map_name: name of the default keymap
+ * @rc_map: current scan/key table
+ * @devno: unique remote control device number
+ * @raw: additional data for raw pulse/space devices
+ * @input_dev: the input child device used to communicate events to userspace
+ * @driver_type: specifies if protocol decoding is done in hardware or software
+ * @idle: used to keep track of RX state
+ * @allowed_protos: bitmask with the supported RC_TYPE_* protocols
+ * @scanmask: some hardware decoders are not capable of providing the full
+ * scancode to the application. As this is a hardware limit, we can't do
+ * anything with it. Yet, as the same keycode table can be used with other
+ * devices, a mask is provided to allow its usage. Drivers should generally
+ * leave this field in blank
+ * @priv: driver-specific data
+ * @keylock: protects the remaining members of the struct
+ * @keypressed: whether a key is currently pressed
+ * @keyup_jiffies: time (in jiffies) when the current keypress should be released
+ * @timer_keyup: timer for releasing a keypress
+ * @last_keycode: keycode of last keypress
+ * @last_scancode: scancode of last keypress
+ * @last_toggle: toggle value of last command
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
+ * @change_protocol: allow changing the protocol used on hardware decoders
+ * @open: callback to allow drivers to enable polling/irq when IR input device
+ * is opened.
+ * @close: callback to allow drivers to disable polling/irq when IR input device
+ * is opened.
+ * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
+ * @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
+ * @tx_ir: transmit IR
+ * @s_idle: enable/disable hardware idle mode, upon which,
+ * device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
+ * @s_carrier_report: enable carrier reports
+ */
+struct rc_dev {
+ struct device dev;
+ const char *input_name;
+ const char *input_phys;
+ struct input_id input_id;
+ char *driver_name;
+ const char *map_name;
+ struct rc_map rc_map;
+ unsigned long devno;
+ struct ir_raw_event_ctrl *raw;
+ struct input_dev *input_dev;
+ enum rc_driver_type driver_type;
+ bool idle;
+ u64 allowed_protos;
+ u32 scanmask;
+ void *priv;
+ spinlock_t keylock;
+ bool keypressed;
+ unsigned long keyup_jiffies;
+ struct timer_list timer_keyup;
+ u32 last_keycode;
+ u32 last_scancode;
+ u8 last_toggle;
+ u32 timeout;
+ u32 min_timeout;
+ u32 max_timeout;
+ u32 rx_resolution;
+ u32 tx_resolution;
+ int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
+ int (*open)(struct rc_dev *dev);
+ void (*close)(struct rc_dev *dev);
+ int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
+ int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
+ int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
+ int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
+ int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+ void (*s_idle)(struct rc_dev *dev, bool enable);
+ int (*s_learning_mode)(struct rc_dev *dev, int enable);
+ int (*s_carrier_report) (struct rc_dev *dev, int enable);
+};
+
+#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
+
+/*
+ * From rc-main.c
+ * Those functions can be used on any type of Remote Controller. They
+ * basically creates an input_dev and properly reports the device as a
+ * Remote Controller, at sys/class/rc.
+ */
+
+struct rc_dev *rc_allocate_device(void);
+void rc_free_device(struct rc_dev *dev);
+int rc_register_device(struct rc_dev *dev);
+void rc_unregister_device(struct rc_dev *dev);
+
+void rc_repeat(struct rc_dev *dev);
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keyup(struct rc_dev *dev);
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
+
+/*
+ * From rc-raw.c
+ * The Raw interface is specific to InfraRed. It may be a good idea to
+ * split it later into a separate header.
+ */
+
+enum raw_event_type {
+ IR_SPACE = (1 << 0),
+ IR_PULSE = (1 << 1),
+ IR_START_EVENT = (1 << 2),
+ IR_STOP_EVENT = (1 << 3),
+};
+
+struct ir_raw_event {
+ union {
+ u32 duration;
+
+ struct {
+ u32 carrier;
+ u8 duty_cycle;
+ };
+ };
+
+ unsigned pulse:1;
+ unsigned reset:1;
+ unsigned timeout:1;
+ unsigned carrier_report:1;
+};
+
+#define DEFINE_IR_RAW_EVENT(event) \
+ struct ir_raw_event event = { \
+ { .duration = 0 } , \
+ .pulse = 0, \
+ .reset = 0, \
+ .timeout = 0, \
+ .carrier_report = 0 }
+
+static inline void init_ir_raw_event(struct ir_raw_event *ev)
+{
+ memset(ev, 0, sizeof(*ev));
+}
+
+#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
+
+void ir_raw_event_handle(struct rc_dev *dev);
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct rc_dev *dev,
+ struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
+
+static inline void ir_raw_event_reset(struct rc_dev *dev)
+{
+ DEFINE_IR_RAW_EVENT(ev);
+ ev.reset = true;
+
+ ir_raw_event_store(dev, &ev);
+ ir_raw_event_handle(dev);
+}
+
+/* extract mask bits out of data and pack them into the result */
+static inline u32 ir_extract_bits(u32 data, u32 mask)
+{
+ u32 vbit = 1, value = 0;
+
+ do {
+ if (mask & 1) {
+ if (data & 1)
+ value |= vbit;
+ vbit <<= 1;
+ }
+ data >>= 1;
+ } while (mask >>= 1);
+
+ return value;
+}
+
+#endif /* _RC_CORE */
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index e0f17edf38ed..ee9e2f747c76 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -11,45 +11,45 @@
#include <linux/input.h>
-#define IR_TYPE_UNKNOWN 0
-#define IR_TYPE_RC5 (1 << 0) /* Philips RC5 protocol */
-#define IR_TYPE_NEC (1 << 1)
-#define IR_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */
-#define IR_TYPE_JVC (1 << 3) /* JVC protocol */
-#define IR_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */
-#define IR_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */
-#define IR_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */
-#define IR_TYPE_OTHER (1u << 31)
+#define RC_TYPE_UNKNOWN 0
+#define RC_TYPE_RC5 (1 << 0) /* Philips RC5 protocol */
+#define RC_TYPE_NEC (1 << 1)
+#define RC_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */
+#define RC_TYPE_JVC (1 << 3) /* JVC protocol */
+#define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */
+#define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */
+#define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */
+#define RC_TYPE_OTHER (1u << 31)
-#define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC | IR_TYPE_RC6 | \
- IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_LIRC | \
- IR_TYPE_RC5_SZ | IR_TYPE_OTHER)
+#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \
+ RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \
+ RC_TYPE_RC5_SZ | RC_TYPE_OTHER)
-struct ir_scancode {
+struct rc_map_table {
u32 scancode;
u32 keycode;
};
-struct ir_scancode_table {
- struct ir_scancode *scan;
+struct rc_map {
+ struct rc_map_table *scan;
unsigned int size; /* Max number of entries */
unsigned int len; /* Used number of entries */
unsigned int alloc; /* Size of *scan in bytes */
- u64 ir_type;
+ u64 rc_type;
const char *name;
spinlock_t lock;
};
-struct rc_keymap {
+struct rc_map_list {
struct list_head list;
- struct ir_scancode_table map;
+ struct rc_map map;
};
/* Routines from rc-map.c */
-int ir_register_map(struct rc_keymap *map);
-void ir_unregister_map(struct rc_keymap *map);
-struct ir_scancode_table *get_rc_map(const char *name);
+int rc_map_register(struct rc_map_list *map);
+void rc_map_unregister(struct rc_map_list *map);
+struct rc_map *rc_map_get(const char *name);
void rc_map_init(void);
/* Names of the several keytables defined in-kernel */
@@ -119,6 +119,7 @@ void rc_map_init(void);
#define RC_MAP_PINNACLE_PCTV_HD "rc-pinnacle-pctv-hd"
#define RC_MAP_PIXELVIEW_NEW "rc-pixelview-new"
#define RC_MAP_PIXELVIEW "rc-pixelview"
+#define RC_MAP_PIXELVIEW_002T "rc-pixelview-002t"
#define RC_MAP_PIXELVIEW_MK12 "rc-pixelview-mk12"
#define RC_MAP_POWERCOLOR_REAL_ANGEL "rc-powercolor-real-angel"
#define RC_MAP_PROTEUS_2309 "rc-proteus-2309"
@@ -137,6 +138,7 @@ void rc_map_init(void);
#define RC_MAP_TREKSTOR "rc-trekstor"
#define RC_MAP_TT_1500 "rc-tt-1500"
#define RC_MAP_TWINHAN_VP1027_DVBS "rc-twinhan1027"
+#define RC_MAP_VIDEOMATE_M1F "rc-videomate-m1f"
#define RC_MAP_VIDEOMATE_S350 "rc-videomate-s350"
#define RC_MAP_VIDEOMATE_TV_PVR "rc-videomate-tv-pvr"
#define RC_MAP_WINFAST "rc-winfast"
diff --git a/include/media/rds.h b/include/media/saa6588.h
index a89426667618..2c3c4420a4eb 100644
--- a/include/media/rds.h
+++ b/include/media/saa6588.h
@@ -4,9 +4,6 @@
saa6588.c and every driver (e.g. bttv-driver.c) that wants
to use the saa6588 module.
- Instead of having a separate rds.h, I'd prefer to include
- this stuff in one of the already existing files like tuner.h
-
(c) 2005 by Hans J. Koch
This program is free software; you can redistribute it and/or modify
@@ -25,10 +22,10 @@
*/
-#ifndef _RDS_H
-#define _RDS_H
+#ifndef _SAA6588_H
+#define _SAA6588_H
-struct rds_command {
+struct saa6588_command {
unsigned int block_count;
int result;
unsigned char __user *buffer;
@@ -36,9 +33,10 @@ struct rds_command {
poll_table *event_list;
};
-#define RDS_CMD_OPEN _IOW('R',1,int)
-#define RDS_CMD_CLOSE _IOW('R',2,int)
-#define RDS_CMD_READ _IOR('R',3,int)
-#define RDS_CMD_POLL _IOR('R',4,int)
+/* These ioctls are internal to the kernel */
+#define SAA6588_CMD_OPEN _IOW('R', 1, int)
+#define SAA6588_CMD_CLOSE _IOW('R', 2, int)
+#define SAA6588_CMD_READ _IOR('R', 3, int)
+#define SAA6588_CMD_POLL _IOR('R', 4, int)
#endif
diff --git a/include/media/si4713.h b/include/media/si4713.h
index 99850a54ed09..ed7353e8a982 100644
--- a/include/media/si4713.h
+++ b/include/media/si4713.h
@@ -23,8 +23,7 @@
* Platform dependent definition
*/
struct si4713_platform_data {
- /* Set power state, zero is off, non-zero is on. */
- int (*set_power)(int power);
+ int gpio_reset; /* < 0 if not used */
};
/*
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 86e3631764ef..9386db829fb7 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -97,6 +97,7 @@ struct soc_camera_host_ops {
#define SOCAM_SENSOR_INVERT_DATA (1 << 4)
struct i2c_board_info;
+struct regulator_bulk_data;
struct soc_camera_link {
/* Camera bus id, used to match a camera and a bus */
@@ -108,6 +109,10 @@ struct soc_camera_link {
const char *module_name;
void *priv;
+ /* Optional regulators that have to be managed on power on/off events */
+ struct regulator_bulk_data *regulators;
+ int num_regulators;
+
/*
* For non-I2C devices platform platform has to provide methods to
* add a device to the system and to remove
diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h
index fcd32a3696ba..a59a84854dc1 100644
--- a/include/media/timb_radio.h
+++ b/include/media/timb_radio.h
@@ -24,7 +24,6 @@
struct timb_radio_platform_data {
int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
struct {
- const char *module_name;
struct i2c_board_info *info;
} tuner;
struct {
diff --git a/include/media/timb_video.h b/include/media/timb_video.h
new file mode 100644
index 000000000000..70ae43970a49
--- /dev/null
+++ b/include/media/timb_video.h
@@ -0,0 +1,33 @@
+/*
+ * timb_video.h Platform struct for the Timberdale video driver
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _TIMB_VIDEO_
+#define _TIMB_VIDEO_ 1
+
+#include <linux/i2c.h>
+
+struct timb_video_platform_data {
+ int dma_channel;
+ int i2c_adapter; /* The I2C adapter where the encoder is attached */
+ struct {
+ const char *module_name;
+ struct i2c_board_info *info;
+ } encoder;
+};
+
+#endif
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 51e89f2267b8..44fe44ec9ea7 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -74,6 +74,7 @@ enum {
V4L2_IDENT_SOI968 = 256,
V4L2_IDENT_OV9640 = 257,
V4L2_IDENT_OV6650 = 258,
+ V4L2_IDENT_OV2640 = 259,
/* module saa7146: reserved range 300-309 */
V4L2_IDENT_SAA7146 = 300,
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 239125af3ea3..2d65b35cdab2 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -98,12 +98,12 @@ int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local);
/* Control helper functions */
int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
- const char **menu_items);
+ const char * const *menu_items);
const char *v4l2_ctrl_get_name(u32 id);
-const char **v4l2_ctrl_get_menu(u32 id);
+const char * const *v4l2_ctrl_get_menu(u32 id);
int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def);
int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu,
- struct v4l2_queryctrl *qctrl, const char **menu_items);
+ struct v4l2_queryctrl *qctrl, const char * const *menu_items);
#define V4L2_CTRL_MENU_IDS_END (0xffffffff)
int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids);
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 9b7bea928a88..d69ab4aae032 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -112,7 +112,7 @@ struct v4l2_ctrl {
u32 step;
u32 menu_skip_mask;
};
- const char **qmenu;
+ const char * const *qmenu;
unsigned long flags;
union {
s32 val;
@@ -202,7 +202,7 @@ struct v4l2_ctrl_config {
s32 def;
u32 flags;
u32 menu_skip_mask;
- const char **qmenu;
+ const char * const *qmenu;
unsigned int is_private:1;
unsigned int is_volatile:1;
};
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index 06daa6e8e051..67df37542c68 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -14,12 +14,7 @@
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/compiler.h> /* need __user */
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#define __MIN_V4L1
-#include <linux/videodev.h>
-#else
#include <linux/videodev2.h>
-#endif
struct v4l2_fh;
@@ -113,10 +108,6 @@ struct v4l2_ioctl_ops {
int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
- /* buffer type is struct vidio_mbuf * */
- int (*vidiocgmbuf) (struct file *file, void *fh, struct video_mbuf *p);
-#endif
int (*vidioc_g_fbuf) (struct file *file, void *fh,
struct v4l2_framebuffer *a);
int (*vidioc_s_fbuf) (struct file *file, void *fh,
@@ -300,22 +291,15 @@ extern void v4l_printk_ioctl(unsigned int cmd);
extern const char *v4l2_field_names[];
extern const char *v4l2_type_names[];
-/* Compatibility layer interface -- v4l1-compat module */
-typedef long (*v4l2_kioctl)(struct file *file,
- unsigned int cmd, void *arg);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-long v4l_compat_translate_ioctl(struct file *file,
- int cmd, void *arg, v4l2_kioctl driver_ioctl);
-#else
-#define v4l_compat_translate_ioctl(file, cmd, arg, ioctl) (-EINVAL)
-#endif
-
#ifdef CONFIG_COMPAT
/* 32 Bits compatibility layer for 64 bits processors */
extern long v4l2_compat_ioctl32(struct file *file, unsigned int cmd,
unsigned long arg);
#endif
+typedef long (*v4l2_kioctl)(struct file *file,
+ unsigned int cmd, void *arg);
+
/* Include support for obsoleted stuff */
extern long video_usercopy(struct file *file, unsigned int cmd,
unsigned long arg, v4l2_kioctl func);
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
index 1d3835fc26be..90ed895e217d 100644
--- a/include/media/videobuf-core.h
+++ b/include/media/videobuf-core.h
@@ -17,10 +17,6 @@
#define _VIDEOBUF_CORE_H
#include <linux/poll.h>
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#define __MIN_V4L1
-#include <linux/videodev.h>
-#endif
#include <linux/videodev2.h>
#define UNSET (-1U)
@@ -212,10 +208,6 @@ int videobuf_qbuf(struct videobuf_queue *q,
struct v4l2_buffer *b);
int videobuf_dqbuf(struct videobuf_queue *q,
struct v4l2_buffer *b, int nonblocking);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int videobuf_cgmbuf(struct videobuf_queue *q,
- struct video_mbuf *mbuf, int count);
-#endif
int videobuf_streamon(struct videobuf_queue *q);
int videobuf_streamoff(struct videobuf_queue *q);