diff options
author | Ben Young Tae Kim <ytkim@qca.qualcomm.com> | 2015-08-10 14:24:12 -0700 |
---|---|---|
committer | Marcel Holtmann <marcel@holtmann.org> | 2015-08-10 23:52:20 +0200 |
commit | 83e81961ff7ef75f97756f316caea5aa6bcc19cc (patch) | |
tree | dcc4bad3f44bcda3eaf3c1b2d6e94be057f5512b /drivers | |
parent | fa1422207756833096b54356a539e3a7d7edec4f (diff) | |
download | linux-83e81961ff7ef75f97756f316caea5aa6bcc19cc.tar.bz2 |
Bluetooth: btqca: Introduce generic QCA ROME support
This is for supporting BT for QCA ROME with vendor specific
HCI commands and initialization on the chip. This will have
USB/UART implementation both, but for now, adding UART vendor
specific commands to patch downloading and set Bluetooth device
address using vendor specific command.
Signed-off-by: Ben Young Tae Kim <ytkim@qca.qualcomm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/bluetooth/Kconfig | 4 | ||||
-rw-r--r-- | drivers/bluetooth/Makefile | 1 | ||||
-rw-r--r-- | drivers/bluetooth/btqca.c | 392 | ||||
-rw-r--r-- | drivers/bluetooth/btqca.h | 135 |
4 files changed, 532 insertions, 0 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 79e8234b1aa5..f5803345e305 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -13,6 +13,10 @@ config BT_RTL tristate select FW_LOADER +config BT_QCA + tristate + select FW_LOADER + config BT_HCIBTUSB tristate "HCI USB driver" depends on USB diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index f40e194e7080..15a0d1de4db4 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o obj-$(CONFIG_BT_WILINK) += btwilink.o obj-$(CONFIG_BT_BCM) += btbcm.o obj-$(CONFIG_BT_RTL) += btrtl.o +obj-$(CONFIG_BT_QCA) += btqca.o btmrvl-y := btmrvl_main.o btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c new file mode 100644 index 000000000000..4a6208168850 --- /dev/null +++ b/drivers/bluetooth/btqca.c @@ -0,0 +1,392 @@ +/* + * Bluetooth supports for Qualcomm Atheros chips + * + * Copyright (c) 2015 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/module.h> +#include <linux/firmware.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "btqca.h" + +#define VERSION "0.1" + +static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version) +{ + struct sk_buff *skb; + struct edl_event_hdr *edl; + struct rome_version *ver; + char cmd; + int err = 0; + + BT_DBG("%s: ROME Patch Version Request", hdev->name); + + cmd = EDL_PATCH_VER_REQ_CMD; + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN, + &cmd, HCI_VENDOR_PKT, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: Failed to read version of ROME (%d)", hdev->name, + err); + return err; + } + + if (skb->len != sizeof(*edl) + sizeof(*ver)) { + BT_ERR("%s: Version size mismatch len %d", hdev->name, + skb->len); + err = -EILSEQ; + goto out; + } + + edl = (struct edl_event_hdr *)(skb->data); + if (!edl || !edl->data) { + BT_ERR("%s: TLV with no header or no data", hdev->name); + err = -EILSEQ; + goto out; + } + + if (edl->cresp != EDL_CMD_REQ_RES_EVT || + edl->rtype != EDL_APP_VER_RES_EVT) { + BT_ERR("%s: Wrong packet received %d %d", hdev->name, + edl->cresp, edl->rtype); + err = -EIO; + goto out; + } + + ver = (struct rome_version *)(edl->data); + + BT_DBG("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id)); + BT_DBG("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver)); + BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rome_ver)); + BT_DBG("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id)); + + /* ROME chipset version can be decided by patch and SoC + * version, combination with upper 2 bytes from SoC + * and lower 2 bytes from patch will be used. + */ + *rome_version = (le32_to_cpu(ver->soc_id) << 16) | + (le16_to_cpu(ver->rome_ver) & 0x0000ffff); + +out: + kfree_skb(skb); + + return err; +} + +static int rome_reset(struct hci_dev *hdev) +{ + struct sk_buff *skb; + int err; + + BT_DBG("%s: ROME HCI_RESET", hdev->name); + + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: Reset failed (%d)", hdev->name, err); + return err; + } + + kfree_skb(skb); + + return 0; +} + +static void rome_tlv_check_data(struct rome_config *config, + const struct firmware *fw) +{ + const u8 *data; + u32 type_len; + u16 tag_id, tag_len; + int idx, length; + struct tlv_type_hdr *tlv; + struct tlv_type_patch *tlv_patch; + struct tlv_type_nvm *tlv_nvm; + + tlv = (struct tlv_type_hdr *)fw->data; + + type_len = le32_to_cpu(tlv->type_len); + length = (type_len >> 8) & 0x00ffffff; + + BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff); + BT_DBG("Length\t\t : %d bytes", length); + + switch (config->type) { + case TLV_TYPE_PATCH: + tlv_patch = (struct tlv_type_patch *)tlv->data; + BT_DBG("Total Length\t\t : %d bytes", + le32_to_cpu(tlv_patch->total_size)); + BT_DBG("Patch Data Length\t : %d bytes", + le32_to_cpu(tlv_patch->data_length)); + BT_DBG("Signing Format Version : 0x%x", + tlv_patch->format_version); + BT_DBG("Signature Algorithm\t : 0x%x", + tlv_patch->signature); + BT_DBG("Reserved\t\t : 0x%x", + le16_to_cpu(tlv_patch->reserved1)); + BT_DBG("Product ID\t\t : 0x%04x", + le16_to_cpu(tlv_patch->product_id)); + BT_DBG("Rom Build Version\t : 0x%04x", + le16_to_cpu(tlv_patch->rom_build)); + BT_DBG("Patch Version\t\t : 0x%04x", + le16_to_cpu(tlv_patch->patch_version)); + BT_DBG("Reserved\t\t : 0x%x", + le16_to_cpu(tlv_patch->reserved2)); + BT_DBG("Patch Entry Address\t : 0x%x", + le32_to_cpu(tlv_patch->entry)); + break; + + case TLV_TYPE_NVM: + idx = 0; + data = tlv->data; + while (idx < length) { + tlv_nvm = (struct tlv_type_nvm *)(data + idx); + + tag_id = le16_to_cpu(tlv_nvm->tag_id); + tag_len = le16_to_cpu(tlv_nvm->tag_len); + + /* Update NVM tags as needed */ + switch (tag_id) { + case EDL_TAG_ID_HCI: + /* HCI transport layer parameters + * enabling software inband sleep + * onto controller side. + */ + tlv_nvm->data[0] |= 0x80; + + /* UART Baud Rate */ + tlv_nvm->data[2] = config->user_baud_rate; + + break; + + case EDL_TAG_ID_DEEP_SLEEP: + /* Sleep enable mask + * enabling deep sleep feature on controller. + */ + tlv_nvm->data[0] |= 0x01; + + break; + } + + idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len); + } + break; + + default: + BT_ERR("Unknown TLV type %d", config->type); + break; + } +} + +static int rome_tlv_send_segment(struct hci_dev *hdev, int idx, int seg_size, + const u8 *data) +{ + struct sk_buff *skb; + struct edl_event_hdr *edl; + struct tlv_seg_resp *tlv_resp; + u8 cmd[MAX_SIZE_PER_TLV_SEGMENT + 2]; + int err = 0; + + BT_DBG("%s: Download segment #%d size %d", hdev->name, idx, seg_size); + + cmd[0] = EDL_PATCH_TLV_REQ_CMD; + cmd[1] = seg_size; + memcpy(cmd + 2, data, seg_size); + + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2, cmd, + HCI_VENDOR_PKT, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: Failed to send TLV segment (%d)", hdev->name, err); + return err; + } + + if (skb->len != sizeof(*edl) + sizeof(*tlv_resp)) { + BT_ERR("%s: TLV response size mismatch", hdev->name); + err = -EILSEQ; + goto out; + } + + edl = (struct edl_event_hdr *)(skb->data); + if (!edl || !edl->data) { + BT_ERR("%s: TLV with no header or no data", hdev->name); + err = -EILSEQ; + goto out; + } + + tlv_resp = (struct tlv_seg_resp *)(edl->data); + + if (edl->cresp != EDL_CMD_REQ_RES_EVT || + edl->rtype != EDL_TVL_DNLD_RES_EVT || tlv_resp->result != 0x00) { + BT_ERR("%s: TLV with error stat 0x%x rtype 0x%x (0x%x)", + hdev->name, edl->cresp, edl->rtype, tlv_resp->result); + err = -EIO; + } + +out: + kfree_skb(skb); + + return err; +} + +static int rome_tlv_download_request(struct hci_dev *hdev, + const struct firmware *fw) +{ + const u8 *buffer, *data; + int total_segment, remain_size; + int ret, i; + + if (!fw || !fw->data) + return -EINVAL; + + total_segment = fw->size / MAX_SIZE_PER_TLV_SEGMENT; + remain_size = fw->size % MAX_SIZE_PER_TLV_SEGMENT; + + BT_DBG("%s: Total segment num %d remain size %d total size %zu", + hdev->name, total_segment, remain_size, fw->size); + + data = fw->data; + for (i = 0; i < total_segment; i++) { + buffer = data + i * MAX_SIZE_PER_TLV_SEGMENT; + ret = rome_tlv_send_segment(hdev, i, MAX_SIZE_PER_TLV_SEGMENT, + buffer); + if (ret < 0) + return -EIO; + } + + if (remain_size) { + buffer = data + total_segment * MAX_SIZE_PER_TLV_SEGMENT; + ret = rome_tlv_send_segment(hdev, total_segment, remain_size, + buffer); + if (ret < 0) + return -EIO; + } + + return 0; +} + +static int rome_download_firmware(struct hci_dev *hdev, + struct rome_config *config) +{ + const struct firmware *fw; + int ret; + + BT_INFO("%s: ROME Downloading %s", hdev->name, config->fwname); + + ret = request_firmware(&fw, config->fwname, &hdev->dev); + if (ret) { + BT_ERR("%s: Failed to request file: %s (%d)", hdev->name, + config->fwname, ret); + return ret; + } + + rome_tlv_check_data(config, fw); + + ret = rome_tlv_download_request(hdev, fw); + if (ret) { + BT_ERR("%s: Failed to download file: %s (%d)", hdev->name, + config->fwname, ret); + } + + release_firmware(fw); + + return ret; +} + +int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + u8 cmd[9]; + int err; + + cmd[0] = EDL_NVM_ACCESS_SET_REQ_CMD; + cmd[1] = 0x02; /* TAG ID */ + cmd[2] = sizeof(bdaddr_t); /* size */ + memcpy(cmd + 3, bdaddr, sizeof(bdaddr_t)); + skb = __hci_cmd_sync_ev(hdev, EDL_NVM_ACCESS_OPCODE, sizeof(cmd), cmd, + HCI_VENDOR_PKT, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + BT_ERR("%s: Change address command failed (%d)", + hdev->name, err); + return err; + } + + kfree_skb(skb); + + return 0; +} +EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome); + +int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate) +{ + u32 rome_ver = 0; + struct rome_config config; + int err; + + BT_DBG("%s: ROME setup on UART", hdev->name); + + config.user_baud_rate = baudrate; + + /* Get ROME version information */ + err = rome_patch_ver_req(hdev, &rome_ver); + if (err < 0 || rome_ver == 0) { + BT_ERR("%s: Failed to get version 0x%x", hdev->name, err); + return err; + } + + BT_INFO("%s: ROME controller version 0x%08x", hdev->name, rome_ver); + + /* Download rampatch file */ + config.type = TLV_TYPE_PATCH; + snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.bin", + rome_ver); + err = rome_download_firmware(hdev, &config); + if (err < 0) { + BT_ERR("%s: Failed to download patch (%d)", hdev->name, err); + return err; + } + + /* Download NVM configuration */ + config.type = TLV_TYPE_NVM; + snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin", + rome_ver); + err = rome_download_firmware(hdev, &config); + if (err < 0) { + BT_ERR("%s: Failed to download NVM (%d)", hdev->name, err); + return err; + } + + /* Perform HCI reset */ + err = rome_reset(hdev); + if (err < 0) { + BT_ERR("%s: Failed to run HCI_RESET (%d)", hdev->name, err); + return err; + } + + BT_INFO("%s: ROME setup on UART is completed", hdev->name); + + return 0; +} +EXPORT_SYMBOL_GPL(qca_uart_setup_rome); + +MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>"); +MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h new file mode 100644 index 000000000000..65e994b96c47 --- /dev/null +++ b/drivers/bluetooth/btqca.h @@ -0,0 +1,135 @@ +/* + * Bluetooth supports for Qualcomm Atheros ROME chips + * + * Copyright (c) 2015 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define EDL_PATCH_CMD_OPCODE (0xFC00) +#define EDL_NVM_ACCESS_OPCODE (0xFC0B) +#define EDL_PATCH_CMD_LEN (1) +#define EDL_PATCH_VER_REQ_CMD (0x19) +#define EDL_PATCH_TLV_REQ_CMD (0x1E) +#define EDL_NVM_ACCESS_SET_REQ_CMD (0x01) +#define MAX_SIZE_PER_TLV_SEGMENT (243) + +#define EDL_CMD_REQ_RES_EVT (0x00) +#define EDL_PATCH_VER_RES_EVT (0x19) +#define EDL_APP_VER_RES_EVT (0x02) +#define EDL_TVL_DNLD_RES_EVT (0x04) +#define EDL_CMD_EXE_STATUS_EVT (0x00) +#define EDL_SET_BAUDRATE_RSP_EVT (0x92) +#define EDL_NVM_ACCESS_CODE_EVT (0x0B) + +#define EDL_TAG_ID_HCI (17) +#define EDL_TAG_ID_DEEP_SLEEP (27) + +enum qca_bardrate { + QCA_BAUDRATE_115200 = 0, + QCA_BAUDRATE_57600, + QCA_BAUDRATE_38400, + QCA_BAUDRATE_19200, + QCA_BAUDRATE_9600, + QCA_BAUDRATE_230400, + QCA_BAUDRATE_250000, + QCA_BAUDRATE_460800, + QCA_BAUDRATE_500000, + QCA_BAUDRATE_720000, + QCA_BAUDRATE_921600, + QCA_BAUDRATE_1000000, + QCA_BAUDRATE_1250000, + QCA_BAUDRATE_2000000, + QCA_BAUDRATE_3000000, + QCA_BAUDRATE_4000000, + QCA_BAUDRATE_1600000, + QCA_BAUDRATE_3200000, + QCA_BAUDRATE_3500000, + QCA_BAUDRATE_AUTO = 0xFE, + QCA_BAUDRATE_RESERVED +}; + +enum rome_tlv_type { + TLV_TYPE_PATCH = 1, + TLV_TYPE_NVM +}; + +struct rome_config { + u8 type; + char fwname[64]; + uint8_t user_baud_rate; +}; + +struct edl_event_hdr { + __u8 cresp; + __u8 rtype; + __u8 data[0]; +} __packed; + +struct rome_version { + __le32 product_id; + __le16 patch_ver; + __le16 rome_ver; + __le32 soc_id; +} __packed; + +struct tlv_seg_resp { + __u8 result; +} __packed; + +struct tlv_type_patch { + __le32 total_size; + __le32 data_length; + __u8 format_version; + __u8 signature; + __le16 reserved1; + __le16 product_id; + __le16 rom_build; + __le16 patch_version; + __le16 reserved2; + __le32 entry; +} __packed; + +struct tlv_type_nvm { + __le16 tag_id; + __le16 tag_len; + __le32 reserve1; + __le32 reserve2; + __u8 data[0]; +} __packed; + +struct tlv_type_hdr { + __le32 type_len; + __u8 data[0]; +} __packed; + +#if IS_ENABLED(CONFIG_BT_QCA) + +int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr); +int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate); + +#else + +static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr) +{ + return -EOPNOTSUPP; +} + +static inline int qca_uart_setup_rome(struct hci_dev *hdev, int speed) +{ + return -EOPNOTSUPP; +} + +#endif |