diff options
author | Hans Verkuil <hverkuil@xs4all.nl> | 2016-02-10 05:40:56 -0200 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@osg.samsung.com> | 2016-02-19 08:10:33 -0200 |
commit | 9322fe0f92385eba582b8679edd89558114dd855 (patch) | |
tree | 5658f9b71c45a66fcb490c84e487e52e064af63f /drivers | |
parent | b339a72e04a62f0b1882c43492fc712f1176b3e6 (diff) | |
download | linux-9322fe0f92385eba582b8679edd89558114dd855.tar.bz2 |
[media] timblogiw: move to staging in preparation for removal
The Timberdale FPGA video driver has not seen any real development
since 2011 (and very little before that).
One of the problems with the timblogiw driver is that it uses videobuf
instead of the newer vb2 framework. The long term goal is to either
convert or remove any driver still using videobuf. Since none of the
core v4l developers has the hardware, we cannot convert it ourselves.
As far as I can tell it was only used in an Intel demo board in 2009
using Meego:
http://www.chinait.com/intelcontent/intelprc/admin/PDFFile/20106411545.pdf
which has since been superseded.
Moving this driver to staging is the first step towards removal. After 2 or
3 kernel cycles it will be removed altogether unless someone steps up to
clean up this driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Richard Röjfors <richard@puffinpack.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/media/platform/Kconfig | 9 | ||||
-rw-r--r-- | drivers/media/platform/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/media/Kconfig | 2 | ||||
-rw-r--r-- | drivers/staging/media/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/media/timb/Kconfig | 11 | ||||
-rw-r--r-- | drivers/staging/media/timb/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/media/timb/timblogiw.c (renamed from drivers/media/platform/timblogiw.c) | 0 |
7 files changed, 15 insertions, 10 deletions
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index fd4fcd5a7184..625ea4f81747 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -54,15 +54,6 @@ config VIDEO_VIU Say Y here if you want to enable VIU device on MPC5121e Rev2+. In doubt, say N. -config VIDEO_TIMBERDALE - tristate "Support for timberdale Video In/LogiWIN" - depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && HAS_DMA - depends on (MFD_TIMBERDALE && TIMB_DMA) || COMPILE_TEST - select VIDEO_ADV7180 - select VIDEOBUF_DMA_CONTIG - ---help--- - Add support for the Video In peripherial of the timberdale FPGA. - config VIDEO_M32R_AR tristate "AR devices" depends on VIDEO_V4L2 diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index 028a7233096b..bbb7bd1eb268 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -2,7 +2,6 @@ # Makefile for the video capture/playback device drivers. # -obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 14697686eea5..d48a5c29c417 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -31,6 +31,8 @@ source "drivers/staging/media/mn88473/Kconfig" source "drivers/staging/media/omap4iss/Kconfig" +source "drivers/staging/media/timb/Kconfig" + # Keep LIRC at the end, as it has sub-menus source "drivers/staging/media/lirc/Kconfig" diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 34c557b4c6d6..fb94f045c40f 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ obj-$(CONFIG_DVB_MN88472) += mn88472/ obj-$(CONFIG_DVB_MN88473) += mn88473/ +obj-$(CONFIG_VIDEO_TIMBERDALE) += timb/ diff --git a/drivers/staging/media/timb/Kconfig b/drivers/staging/media/timb/Kconfig new file mode 100644 index 000000000000..e413fecc1e67 --- /dev/null +++ b/drivers/staging/media/timb/Kconfig @@ -0,0 +1,11 @@ +config VIDEO_TIMBERDALE + tristate "Support for timberdale Video In/LogiWIN" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && HAS_DMA + depends on (MFD_TIMBERDALE && TIMB_DMA) || COMPILE_TEST + select VIDEO_ADV7180 + select VIDEOBUF_DMA_CONTIG + ---help--- + Add support for the Video In peripherial of the timberdale FPGA. + + This driver is deprecated and will be removed soon unless someone + will start the work to convert this driver to the vb2 framework. diff --git a/drivers/staging/media/timb/Makefile b/drivers/staging/media/timb/Makefile new file mode 100644 index 000000000000..4c989c23a0e0 --- /dev/null +++ b/drivers/staging/media/timb/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o diff --git a/drivers/media/platform/timblogiw.c b/drivers/staging/media/timb/timblogiw.c index 113c9f3c0b3e..113c9f3c0b3e 100644 --- a/drivers/media/platform/timblogiw.c +++ b/drivers/staging/media/timb/timblogiw.c |