diff options
| author | Manuel Lauss <mano@roarinelk.homelinux.net> | 2006-02-01 03:06:54 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-02-01 08:53:27 -0800 |
| commit | 00d340b94f6df17d5dc478521e4ee1cfb30c53ac (patch) | |
| tree | f4949002dc468931efdc01bd70492251a8524d32 /drivers/video | |
| parent | 06c6f90032e39d33d02ab20f32e3f3cd87f58d28 (diff) | |
| download | linux-00d340b94f6df17d5dc478521e4ee1cfb30c53ac.tar.bz2 | |
[PATCH] i810fb: Do not probe the third i2c bus by default
Some time before 2.6.15, a third DDC channel was added to i810fb. On
systems where these ddc pins are not connected, the probe takes about 10
seconds.
Add a boot/module option for i810fb to explicitly probe for the 3rd ddc bus
if needed.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/video')
| -rw-r--r-- | drivers/video/i810/i810-i2c.c | 6 | ||||
| -rw-r--r-- | drivers/video/i810/i810.h | 1 | ||||
| -rw-r--r-- | drivers/video/i810/i810_main.c | 13 |
3 files changed, 14 insertions, 6 deletions
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c index bd410e06db73..e3c8b5f1ca76 100644 --- a/drivers/video/i810/i810-i2c.c +++ b/drivers/video/i810/i810-i2c.c @@ -191,11 +191,11 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn) u8 *edid = NULL; int i; - DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn); - if (conn < 4) { + DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn+1); + if (conn < par->ddc_num) { for (i = 0; i < 3; i++) { /* Do the real work */ - edid = i810_do_probe_i2c_edid(&par->chan[conn-1]); + edid = i810_do_probe_i2c_edid(&par->chan[conn]); if (edid) break; } diff --git a/drivers/video/i810/i810.h b/drivers/video/i810/i810.h index 6c187d5fe951..579195c2bea3 100644 --- a/drivers/video/i810/i810.h +++ b/drivers/video/i810/i810.h @@ -280,6 +280,7 @@ struct i810fb_par { u32 blit_bpp; u32 ovract; u32 cur_state; + u32 ddc_num; int mtrr_reg; u16 bltcntl; u8 interlace; diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index 266d0ab92663..d8467c03b49f 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -149,6 +149,7 @@ static int vyres __devinitdata; static int sync __devinitdata; static int extvga __devinitdata; static int dcolor __devinitdata; +static int ddc3 __devinitdata = 2; /*------------------------------------------------------------*/ @@ -1763,6 +1764,8 @@ static void __devinit i810_init_defaults(struct i810fb_par *par, if (sync) par->dev_flags |= ALWAYS_SYNC; + par->ddc_num = ddc3; + if (bpp < 8) bpp = 8; @@ -1885,7 +1888,7 @@ static void __devinit i810fb_find_init_mode(struct fb_info *info) int found = 0; #ifdef CONFIG_FB_I810_I2C int i; - int err; + int err = 1; struct i810fb_par *par = info->par; #endif @@ -1895,8 +1898,8 @@ static void __devinit i810fb_find_init_mode(struct fb_info *info) #ifdef CONFIG_FB_I810_I2C i810_create_i2c_busses(par); - for (i = 0; i < 4; i++) { - err = i810_probe_i2c_connector(info, &par->edid, i+1); + for (i = 0; i < par->ddc_num + 1; i++) { + err = i810_probe_i2c_connector(info, &par->edid, i); if (!err) break; } @@ -1983,6 +1986,8 @@ static int __devinit i810fb_setup(char *options) vsync2 = simple_strtoul(this_opt+7, NULL, 0); else if (!strncmp(this_opt, "dcolor", 6)) dcolor = 1; + else if (!strncmp(this_opt, "ddc3", 4)) + ddc3 = 3; else mode_option = this_opt; } @@ -2190,6 +2195,8 @@ MODULE_PARM_DESC(sync, "wait for accel engine to finish drawing" module_param(dcolor, bool, 0); MODULE_PARM_DESC(dcolor, "use DirectColor visuals" " (default = 0 = TrueColor)"); +module_param(ddc3, bool, 0); +MODULE_PARM_DESC(ddc3, "Probe DDC bus 3 (default = 0 = no)"); module_param(mode_option, charp, 0); MODULE_PARM_DESC(mode_option, "Specify initial video mode"); |