Merge branch 'sgu/mxs-core-v8' of git://git.pengutronix.de/git/ukl/linux-2.6 into imx-for-2.6.38-new

12 files changed, 328 insertions, 38 deletions

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 61800f77dac8..ced846ac4141 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1330,6 +1330,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 	 */
 
 	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		if (hcd->self.uses_pio_for_control)
+			return ret;
 		if (hcd->self.uses_dma) {
 			urb->setup_dma = dma_map_single(
 					hcd->self.controller,
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb72b71832..655f3c9f88bf 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -161,6 +161,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			if (pdev->revision < 0xa4)
 				ehci->no_selective_suspend = 1;
 			break;
+
+		/* MCP89 chips on the MacBookAir3,1 give EPROTO when
+		 * fetching device descriptors unless LPM is disabled.
+		 * There are also intermittent problems enumerating
+		 * devices with PPCD enabled.
+		 */
+		case 0x0d9d:
+			ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+			ehci->has_lpm = 0;
+			ehci->has_ppcd = 0;
+			ehci->command &= ~CMD_PPCEE;
+			break;
 		}
 		break;
 	case PCI_VENDOR_ID_VIA:
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f9d483..5d963e350494 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
 		u32 __iomem *addr, u32 port_status)
 {
+	/* Don't allow the USB core to disable SuperSpeed ports. */
+	if (xhci->port_array[wIndex] == 0x03) {
+		xhci_dbg(xhci, "Ignoring request to disable "
+				"SuperSpeed port.\n");
+		return;
+	}
+
 	/* Write 1 to disable the port */
 	xhci_writel(xhci, port_status | PORT_PE, addr);
 	port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d178761c3981..0fae58ef8afe 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->dcbaa = NULL;
 
 	scratchpad_free(xhci);
+
+	xhci->num_usb2_ports = 0;
+	xhci->num_usb3_ports = 0;
+	kfree(xhci->usb2_ports);
+	kfree(xhci->usb3_ports);
+	kfree(xhci->port_array);
+
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
 	xhci->bus_suspended = 0;
@@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 			&xhci->ir_set->erst_dequeue);
 }
 
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+		u32 __iomem *addr, u8 major_revision)
+{
+	u32 temp, port_offset, port_count;
+	int i;
+
+	if (major_revision > 0x03) {
+		xhci_warn(xhci, "Ignoring unknown port speed, "
+				"Ext Cap %p, revision = 0x%x\n",
+				addr, major_revision);
+		/* Ignoring port protocol we can't understand. FIXME */
+		return;
+	}
+
+	/* Port offset and count in the third dword, see section 7.2 */
+	temp = xhci_readl(xhci, addr + 2);
+	port_offset = XHCI_EXT_PORT_OFF(temp);
+	port_count = XHCI_EXT_PORT_COUNT(temp);
+	xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+			"count = %u, revision = 0x%x\n",
+			addr, port_offset, port_count, major_revision);
+	/* Port count includes the current port offset */
+	if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+		/* WTF? "Valid values are ‘1’ to MaxPorts" */
+		return;
+	port_offset--;
+	for (i = port_offset; i < (port_offset + port_count); i++) {
+		/* Duplicate entry.  Ignore the port if the revisions differ. */
+		if (xhci->port_array[i] != 0) {
+			xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+					" port %u\n", addr, i);
+			xhci_warn(xhci, "Port was marked as USB %u, "
+					"duplicated as USB %u\n",
+					xhci->port_array[i], major_revision);
+			/* Only adjust the roothub port counts if we haven't
+			 * found a similar duplicate.
+			 */
+			if (xhci->port_array[i] != major_revision &&
+				xhci->port_array[i] != (u8) -1) {
+				if (xhci->port_array[i] == 0x03)
+					xhci->num_usb3_ports--;
+				else
+					xhci->num_usb2_ports--;
+				xhci->port_array[i] = (u8) -1;
+			}
+			/* FIXME: Should we disable the port? */
+		}
+		xhci->port_array[i] = major_revision;
+		if (major_revision == 0x03)
+			xhci->num_usb3_ports++;
+		else
+			xhci->num_usb2_ports++;
+	}
+	/* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.  We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+	u32 __iomem *addr;
+	u32 offset;
+	unsigned int num_ports;
+	int i, port_index;
+
+	addr = &xhci->cap_regs->hcc_params;
+	offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+	if (offset == 0) {
+		xhci_err(xhci, "No Extended Capability registers, "
+				"unable to set up roothub.\n");
+		return -ENODEV;
+	}
+
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+	if (!xhci->port_array)
+		return -ENOMEM;
+
+	/*
+	 * For whatever reason, the first capability offset is from the
+	 * capability register base, not from the HCCPARAMS register.
+	 * See section 5.3.6 for offset calculation.
+	 */
+	addr = &xhci->cap_regs->hc_capbase + offset;
+	while (1) {
+		u32 cap_id;
+
+		cap_id = xhci_readl(xhci, addr);
+		if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+			xhci_add_in_port(xhci, num_ports, addr,
+					(u8) XHCI_EXT_PORT_MAJOR(cap_id));
+		offset = XHCI_EXT_CAPS_NEXT(cap_id);
+		if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+				== num_ports)
+			break;
+		/*
+		 * Once you're into the Extended Capabilities, the offset is
+		 * always relative to the register holding the offset.
+		 */
+		addr += offset;
+	}
+
+	if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+		xhci_warn(xhci, "No ports on the roothubs?\n");
+		return -ENODEV;
+	}
+	xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+			xhci->num_usb2_ports, xhci->num_usb3_ports);
+	/*
+	 * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+	 * Not sure how the USB core will handle a hub with no ports...
+	 */
+	if (xhci->num_usb2_ports) {
+		xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+				xhci->num_usb2_ports, flags);
+		if (!xhci->usb2_ports)
+			return -ENOMEM;
+
+		port_index = 0;
+		for (i = 0; i < num_ports; i++)
+			if (xhci->port_array[i] != 0x03) {
+				xhci->usb2_ports[port_index] =
+					&xhci->op_regs->port_status_base +
+					NUM_PORT_REGS*i;
+				xhci_dbg(xhci, "USB 2.0 port at index %u, "
+						"addr = %p\n", i,
+						xhci->usb2_ports[port_index]);
+				port_index++;
+			}
+	}
+	if (xhci->num_usb3_ports) {
+		xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+				xhci->num_usb3_ports, flags);
+		if (!xhci->usb3_ports)
+			return -ENOMEM;
+
+		port_index = 0;
+		for (i = 0; i < num_ports; i++)
+			if (xhci->port_array[i] == 0x03) {
+				xhci->usb3_ports[port_index] =
+					&xhci->op_regs->port_status_base +
+					NUM_PORT_REGS*i;
+				xhci_dbg(xhci, "USB 3.0 port at index %u, "
+						"addr = %p\n", i,
+						xhci->usb3_ports[port_index]);
+				port_index++;
+			}
+	}
+	return 0;
+}
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
@@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	if (scratchpad_alloc(xhci, flags))
 		goto fail;
+	if (xhci_setup_port_arrays(xhci, flags))
+		goto fail;
 
 	return 0;
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06fca0835b52..45e4a3108cc3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1549,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		cmd_completion = command->completion;
 		cmd_status = &command->status;
 		command->command_trb = xhci->cmd_ring->enqueue;
+
+		/* Enqueue pointer can be left pointing to the link TRB,
+		 * we must handle that
+		 */
+		if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+				== TRB_TYPE(TRB_LINK))
+			command->command_trb =
+				xhci->cmd_ring->enq_seg->next->trbs;
+
 		list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
 	} else {
 		in_ctx = virt_dev->in_ctx;
@@ -2272,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Attempt to submit the Reset Device command to the command ring */
 	spin_lock_irqsave(&xhci->lock, flags);
 	reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+	/* Enqueue pointer can be left pointing to the link TRB,
+	 * we must handle that
+	 */
+	if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+			== TRB_TYPE(TRB_LINK))
+		reset_device_cmd->command_trb =
+			xhci->cmd_ring->enq_seg->next->trbs;
+
 	list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
 	ret = xhci_queue_reset_device(xhci, slot_id);
 	if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 85e65647d445..170c367112d2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_protocol_caps
+ * @revision:		major revision, minor revision, capability ID,
+ *			and next capability pointer.
+ * @name_string:	Four ASCII characters to say which spec this xHC
+ *			follows, typically "USB ".
+ * @port_info:		Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+	u32	revision;
+	u32	name_string;
+	u32	port_info;
+};
+
+#define	XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
+#define	XHCI_EXT_PORT_OFF(x)	((x) & 0xff)
+#define	XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
+
+/**
  * struct xhci_container_ctx
  * @type: Type of context.  Used to calculated offsets to contained contexts.
  * @size: Size of the context data
@@ -1240,6 +1258,14 @@ struct xhci_hcd {
 	u32			suspended_ports[8];	/* which ports are
 							   suspended */
 	unsigned long		resume_done[MAX_HC_PORTS];
+	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+	u8			*port_array;
+	/* Array of pointers to USB 3.0 PORTSC registers */
+	u32 __iomem		**usb3_ports;
+	unsigned int		num_usb3_ports;
+	/* Array of pointers to USB 2.0 PORTSC registers */
+	u32 __iomem		**usb2_ports;
+	unsigned int		num_usb2_ports;
 };
 
 /* For testing purposes */
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 719c6180b31f..ac5bfd619e62 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -536,6 +536,7 @@ static const struct file_operations yurex_fops = {
 	.open =		yurex_open,
 	.release =	yurex_release,
 	.fasync	=	yurex_fasync,
+	.llseek =	default_llseek,
 };
 
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6669fc3b804..99beebce8550 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2116,12 +2116,15 @@ bad_config:
 	 * Otherwise, wait till the gadget driver hooks up.
 	 */
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
 		MUSB_HST_MODE(musb);
 		musb->xceiv->default_a = 1;
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 
 		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
 
+		hcd->self.uses_pio_for_control = 1;
 		DBG(1, "%s mode, status %d, devctl %02x %c\n",
 			"HOST", status,
 			musb_readb(musb->mregs, MUSB_DEVCTL),
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 36cfd060dbe5..9d6ade82b9f2 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,6 +92,59 @@
 
 /* ----------------------------------------------------------------------- */
 
+/* Maps the buffer to dma  */
+
+static inline void map_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		request->request.dma = dma_map_single(
+				musb->controller,
+				request->request.buf,
+				request->request.length,
+				request->tx
+					? DMA_TO_DEVICE
+					: DMA_FROM_DEVICE);
+		request->mapped = 1;
+	} else {
+		dma_sync_single_for_device(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->mapped = 0;
+	}
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		DBG(20, "not unmapping a never mapped buffer\n");
+		return;
+	}
+	if (request->mapped) {
+		dma_unmap_single(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->request.dma = DMA_ADDR_INVALID;
+		request->mapped = 0;
+	} else {
+		dma_sync_single_for_cpu(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+
+	}
+}
+
 /*
  * Immediately complete a request.
  *
@@ -119,24 +172,8 @@ __acquires(ep->musb->lock)
 
 	ep->busy = 1;
 	spin_unlock(&musb->lock);
-	if (is_dma_capable()) {
-		if (req->mapped) {
-			dma_unmap_single(musb->controller,
-					req->request.dma,
-					req->request.length,
-					req->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			req->request.dma = DMA_ADDR_INVALID;
-			req->mapped = 0;
-		} else if (req->request.dma != DMA_ADDR_INVALID)
-			dma_sync_single_for_cpu(musb->controller,
-					req->request.dma,
-					req->request.length,
-					req->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-	}
+	if (is_dma_capable() && ep->dma)
+		unmap_dma_buffer(req, musb);
 	if (request->status == 0)
 		DBG(5, "%s done request %p,  %d/%d\n",
 				ep->end_point.name, request,
@@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req)
 #endif
 
 	if (!use_dma) {
+		/*
+		 * Unmap the dma buffer back to cpu if dma channel
+		 * programming fails
+		 */
+		if (is_dma_capable() && musb_ep->dma)
+			unmap_dma_buffer(req, musb);
+
 		musb_write_fifo(musb_ep->hw_ep, fifo_count,
 				(u8 *) (request->buf + request->actual));
 		request->actual += fifo_count;
@@ -713,6 +757,21 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 					return;
 			}
 #endif
+			/*
+			 * Unmap the dma buffer back to cpu if dma channel
+			 * programming fails. This buffer is mapped if the
+			 * channel allocation is successful
+			 */
+			 if (is_dma_capable() && musb_ep->dma) {
+				unmap_dma_buffer(req, musb);
+
+				/*
+				 * Clear DMAENAB and AUTOCLEAR for the
+				 * PIO mode transfer
+				 */
+				csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+				musb_writew(epio, MUSB_RXCSR, csr);
+			}
 
 			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 					(request->buf + request->actual));
@@ -837,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 		if (!request)
 			return;
 	}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
 exit:
+#endif
 	/* Analyze request */
 	rxstate(musb, to_musb_request(request));
 }
@@ -1150,26 +1211,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	request->epnum = musb_ep->current_epnum;
 	request->tx = musb_ep->is_in;
 
-	if (is_dma_capable() && musb_ep->dma) {
-		if (request->request.dma == DMA_ADDR_INVALID) {
-			request->request.dma = dma_map_single(
-					musb->controller,
-					request->request.buf,
-					request->request.length,
-					request->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			request->mapped = 1;
-		} else {
-			dma_sync_single_for_device(musb->controller,
-					request->request.dma,
-					request->request.length,
-					request->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			request->mapped = 0;
-		}
-	} else
+	if (is_dma_capable() && musb_ep->dma)
+		map_dma_buffer(request, musb);
+	else
 		request->mapped = 0;
 
 	spin_lock_irqsave(&musb->lock, lockflags);
@@ -1789,6 +1833,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		spin_unlock_irqrestore(&musb->lock, flags);
 
 		if (is_otg_enabled(musb)) {
+			struct usb_hcd	*hcd = musb_to_hcd(musb);
+
 			DBG(3, "OTG startup...\n");
 
 			/* REVISIT:  funcall to other code, which also
@@ -1803,6 +1849,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 				musb->gadget_driver = NULL;
 				musb->g.dev.driver = NULL;
 				spin_unlock_irqrestore(&musb->lock, flags);
+			} else {
+				hcd->self.uses_pio_for_control = 1;
 			}
 		}
 	}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 76f8b3556672..6a50965e23f2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -201,6 +201,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -696,6 +697,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 263f62551197..1286f1e23d8c 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -114,6 +114,9 @@
 /* Lenz LI-USB Computer Interface. */
 #define FTDI_LENZ_LIUSB_PID	0xD780
 
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID	0xF070
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */
@@ -721,6 +724,7 @@
  */
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
 
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 861223f2af6e..6954de50c0ff 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -51,6 +51,7 @@ static struct usb_driver usb_serial_driver = {
 	.suspend =	usb_serial_suspend,
 	.resume =	usb_serial_resume,
 	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
 };
 
 /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
@@ -1343,6 +1344,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		return -ENODEV;
 
 	fixup_generic(driver);
+	if (driver->usb_driver)
+		driver->usb_driver->supports_autosuspend = 1;
 
 	if (!driver->description)
 		driver->description = driver->driver.name;