Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

13 files changed, 61 insertions, 61 deletions

diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 32909e2938d5..20cca24ff5f0 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -412,7 +412,7 @@ struct _MINI_ADAPTER
 
 	// this to keep track of the Tx and Rx MailBox Registers.
 	atomic_t		    CurrNumFreeTxDesc;
-	// to keep track the no of byte recieved
+	// to keep track the no of byte received
 	USHORT				PrevNumRecvDescs;
 	USHORT				CurrNumRecvDescs;
 	UINT				u32TotalDSD;
@@ -527,7 +527,7 @@ struct _MINI_ADAPTER
 	BOOLEAN			bStatusWrite;
 	UINT			uiNVMDSDSize;
 	UINT			uiVendorExtnFlag;
-	 //it will always represent choosed DSD at any point of time.
+	 //it will always represent chosen DSD at any point of time.
 	 // Generally it is Active DSD but in case of NVM RD/WR it might be different.
 	UINT			ulFlashCalStart;
 	ULONG                   ulFlashControlSectionStart;
@@ -546,10 +546,10 @@ struct _MINI_ADAPTER
 	PFLASH_CS_INFO psFlashCSInfo ;
 	PFLASH2X_VENDORSPECIFIC_INFO psFlash2xVendorInfo;
 	UINT uiFlashBaseAdd; //Flash start address
-	UINT uiActiveISOOffset; //Active ISO offset choosen before f/w download
+	UINT uiActiveISOOffset; //Active ISO offset chosen before f/w download
 	FLASH2X_SECTION_VAL eActiveISO; //Active ISO section val
-	FLASH2X_SECTION_VAL eActiveDSD;	//Active DSD val choosen before f/w download
-	UINT uiActiveDSDOffsetAtFwDld;  //For accessing Active DSD choosen before f/w download
+	FLASH2X_SECTION_VAL eActiveDSD;	//Active DSD val chosen before f/w download
+	UINT uiActiveDSDOffsetAtFwDld;  //For accessing Active DSD chosen before f/w download
 	UINT uiFlashLayoutMajorVersion ;
 	UINT uiFlashLayoutMinorVersion;
 	BOOLEAN bAllDSDWriteAllow ;
diff --git a/drivers/staging/bcm/CmHost.c b/drivers/staging/bcm/CmHost.c
index 9be184f143e5..c0ee95a71343 100644
--- a/drivers/staging/bcm/CmHost.c
+++ b/drivers/staging/bcm/CmHost.c
@@ -384,7 +384,7 @@ static inline VOID CopyClassifierRuleToSF(PMINI_ADAPTER Adapter,stConvergenceSLT
 		}
 		if(psfCSType->cCPacketClassificationRule.u8Protocol == 0)
 		{
-			//we didnt get protocol field filled in by the BS
+			//we didn't get protocol field filled in by the BS
 			pstClassifierEntry->ucProtocolLength=0;
 		}
 		else
@@ -879,7 +879,7 @@ static VOID CopyToAdapter( register PMINI_ADAPTER Adapter,		/**<Pointer to the A
 
 						/*
 							Passing the argument u8PHSI instead of clsid. Because for DL with no classifier rule,
-							clsid will be zero hence we cant have multiple PHS rules for the same SF.
+							clsid will be zero hence we can't have multiple PHS rules for the same SF.
 							To support multiple PHS rule, passing u8PHSI.
 						*/
 
@@ -1103,7 +1103,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
 	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  "u8TrafficIndicationPreference	: 0x%X",
 		pstAddIndication->sfAuthorizedSet.u8TrafficIndicationPreference);
 
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved		: 0x%X",pstAddIndication->sfAuthorizedSet.u8TotalClassifiers);
+	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received		: 0x%X",pstAddIndication->sfAuthorizedSet.u8TotalClassifiers);
 
 	nCurClassifierCnt = pstAddIndication->sfAuthorizedSet.u8TotalClassifiers;
 
@@ -1305,7 +1305,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
 	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  "u8TrafficIndicationPreference	: 0x%02X",
 		pstAddIndication->sfAdmittedSet.u8TrafficIndicationPreference);
 
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved		: 0x%X",pstAddIndication->sfAdmittedSet.u8TotalClassifiers);
+	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received		: 0x%X",pstAddIndication->sfAdmittedSet.u8TotalClassifiers);
 
 	nCurClassifierCnt = pstAddIndication->sfAdmittedSet.u8TotalClassifiers;
 
@@ -1502,7 +1502,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
 	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " u8TrafficIndicationPreference	: 0x%X",
 		pstAddIndication->sfActiveSet.u8TrafficIndicationPreference);
 
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved		: 0x%X",pstAddIndication->sfActiveSet.u8TotalClassifiers);
+	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received		: 0x%X",pstAddIndication->sfActiveSet.u8TotalClassifiers);
 
 	nCurClassifierCnt = pstAddIndication->sfActiveSet.u8TotalClassifiers;
 
@@ -1696,7 +1696,7 @@ ULONG StoreCmControlResponseMessage(PMINI_ADAPTER Adapter,PVOID pvBuffer,UINT *p
 		//No Special handling send the message as it is
 		return 1;
 	}
-	// For DSA_REQ, only upto "psfAuthorizedSet" parameter should be accessed by driver!
+	// For DSA_REQ, only up to "psfAuthorizedSet" parameter should be accessed by driver!
 
 	pstAddIndication=kmalloc(sizeof(*pstAddIndication), GFP_KERNEL);
 	if(NULL==pstAddIndication)
@@ -1788,7 +1788,7 @@ static inline stLocalSFAddIndicationAlt
 	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Inside RestoreCmControlResponseMessage ");
 	/*
 	//Need to Allocate memory to contain the SUPER Large structures
-	//Our driver cant create these structures on Stack :(
+	//Our driver can't create these structures on Stack :(
 	*/
 	pstAddIndicationDest=kmalloc(sizeof(stLocalSFAddIndicationAlt), GFP_KERNEL);
 
@@ -1957,7 +1957,7 @@ INT AllocAdapterDsxBuffer(PMINI_ADAPTER Adapter)
 {
 	/*
 	//Need to Allocate memory to contain the SUPER Large structures
-	//Our driver cant create these structures on Stack
+	//Our driver can't create these structures on Stack
 	*/
 	Adapter->caDsxReqResp=kmalloc(sizeof(stLocalSFAddIndicationAlt)+LEADER_SIZE, GFP_KERNEL);
 	if(!Adapter->caDsxReqResp)
diff --git a/drivers/staging/bcm/HostMIBSInterface.h b/drivers/staging/bcm/HostMIBSInterface.h
index f17a4f13474c..e34531b638e8 100644
--- a/drivers/staging/bcm/HostMIBSInterface.h
+++ b/drivers/staging/bcm/HostMIBSInterface.h
@@ -62,7 +62,7 @@ typedef struct _S_MIBS_HOST_INFO
 	ULONG			NumDesUsed;
 	ULONG			CurrNumFreeDesc;
 	ULONG			PrevNumFreeDesc;
-	// to keep track the no of byte recieved
+	// to keep track the no of byte received
 	ULONG			PrevNumRcevBytes;
 	ULONG			CurrNumRcevBytes;
 
diff --git a/drivers/staging/bcm/IPv6Protocol.c b/drivers/staging/bcm/IPv6Protocol.c
index 91b6fbe33c91..5b4fd372ec36 100644
--- a/drivers/staging/bcm/IPv6Protocol.c
+++ b/drivers/staging/bcm/IPv6Protocol.c
@@ -287,7 +287,7 @@ static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Head
 
 	for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
 	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Recieved Packet : \n ");
+		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n ");
 		DumpIpv6Address(aulSrcIP);
 		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n");
 		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]);
@@ -340,7 +340,7 @@ static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Hea
 
 	for(uiLoopIndex=0;uiLoopIndex<uiCountIPDestinationAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
 	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Recieved Packet : \n ");
+		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Received Packet : \n ");
 		DumpIpv6Address(aulDestIP);
 		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Mask In Classifier Rule: \n");
 		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]);
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index bf5c0ad86610..96fa4ead7930 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -11,7 +11,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:				BCM_STATUS_SUCCESS - If Wakeup of the HW Interface was successful.
-						Other           - If an error occured.
+						Other           - If an error occurred.
 */
 
 
@@ -26,7 +26,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:				BCM_STATUS_SUCCESS - If Idle mode response related HW configuration was successful.
-						Other           - If an error occured.
+						Other           - If an error occurred.
 */
 
 /*
diff --git a/drivers/staging/bcm/InterfaceIsr.c b/drivers/staging/bcm/InterfaceIsr.c
index 220ff922bdcf..67719d57256d 100644
--- a/drivers/staging/bcm/InterfaceIsr.c
+++ b/drivers/staging/bcm/InterfaceIsr.c
@@ -80,8 +80,8 @@ static void read_int_callback(struct urb *urb/*, struct pt_regs *regs*/)
 		}
 		case -EINPROGRESS:
 		{
-			//This situation may happend when URBunlink is used. for detail check usb_unlink_urb documentation.
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occured... something very bad is going on");
+			//This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation.
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
 			break ;
 			//return;
 		}
diff --git a/drivers/staging/bcm/InterfaceRx.c b/drivers/staging/bcm/InterfaceRx.c
index 533f8ebe0f84..806ef5d18522 100644
--- a/drivers/staging/bcm/InterfaceRx.c
+++ b/drivers/staging/bcm/InterfaceRx.c
@@ -34,7 +34,7 @@ GetBulkInRcb(PS_INTERFACE_ADAPTER psIntfAdapter)
 	return pRcb;
 }
 
-/*this is receive call back - when pkt avilable for receive (BULK IN- end point)*/
+/*this is receive call back - when pkt available for receive (BULK IN- end point)*/
 static void read_bulk_callback(struct urb *urb)
 {
 	struct sk_buff *skb = NULL;
@@ -123,7 +123,7 @@ static void read_bulk_callback(struct urb *urb)
 	if((ntohs(pLeader->Vcid) == VCID_CONTROL_PACKET) ||
 	    (!(pLeader->Status >= 0x20  &&  pLeader->Status <= 0x3F)))
 	{
-	    BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_CTRL, DBG_LVL_ALL, "Recived control pkt...");
+	    BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_CTRL, DBG_LVL_ALL, "Received control pkt...");
 		*(PUSHORT)skb->data = pLeader->Status;
        	memcpy(skb->data+sizeof(USHORT), urb->transfer_buffer +
 			(sizeof(LEADER)), pLeader->PLength);
@@ -142,7 +142,7 @@ static void read_bulk_callback(struct urb *urb)
 		  * Data Packet, Format a proper Ethernet Header
         	  * and give it to the stack
 		  */
-        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Recived Data pkt...");
+        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Received Data pkt...");
 		skb_reserve(skb, 2 + SKB_RESERVE_PHS_BYTES);
 		memcpy(skb->data+ETH_HLEN, (PUCHAR)urb->transfer_buffer + sizeof(LEADER), pLeader->PLength);
 		skb->dev = Adapter->dev;
@@ -151,7 +151,7 @@ static void read_bulk_callback(struct urb *urb)
 		skb_put (skb, pLeader->PLength + ETH_HLEN);
 		Adapter->PackInfo[QueueIndex].uiTotalRxBytes+=pLeader->PLength;
 		Adapter->PackInfo[QueueIndex].uiThisPeriodRxBytes+= pLeader->PLength;
-        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Recived Data pkt of len :0x%X", pLeader->PLength);
+        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Received Data pkt of len :0x%X", pLeader->PLength);
 
 		if(netif_running(Adapter->dev))
 		{
@@ -237,7 +237,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:				TRUE  - If Rx was successful.
-					Other - If an error occured.
+					Other - If an error occurred.
 */
 
 BOOLEAN InterfaceRx (PS_INTERFACE_ADAPTER psIntfAdapter)
diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h
index e4f8eb70be1e..f859cf1c47b0 100644
--- a/drivers/staging/bcm/Ioctl.h
+++ b/drivers/staging/bcm/Ioctl.h
@@ -241,7 +241,7 @@ typedef struct bulkwrmbuffer
 
 typedef enum _FLASH2X_SECTION_VAL
 {
-	NO_SECTION_VAL = 0, //no section is choosen when absolute offset is given for RD/WR
+	NO_SECTION_VAL = 0, //no section is chosen when absolute offset is given for RD/WR
 	ISO_IMAGE1,
 	ISO_IMAGE2,
 	DSD0,
diff --git a/drivers/staging/bcm/LeakyBucket.c b/drivers/staging/bcm/LeakyBucket.c
index f4cf41c0e46b..a55d4228e8e0 100644
--- a/drivers/staging/bcm/LeakyBucket.c
+++ b/drivers/staging/bcm/LeakyBucket.c
@@ -213,7 +213,7 @@ static VOID CheckAndSendPacketFromIndex(PMINI_ADAPTER Adapter, PacketInfo *psSF)
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "For Queue: %zd\n", psSF-Adapter->PackInfo);
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "\nAvailable Tokens = %d required = %d\n",
 					psSF->uiCurrentTokenCount, iPacketLen);
-				//this part indicates that becuase of non-availability of the tokens
+				//this part indicates that because of non-availability of the tokens
 				//pkt has not been send out hence setting the pending flag indicating the host to send it out
 				//first next iteration  .
 				psSF->uiPendedLast = TRUE;
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index d624f35d0551..c5003b62234c 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -602,7 +602,7 @@ VOID LinkControlResponseMessage(PMINI_ADAPTER Adapter,PUCHAR pucBuffer)
 				Adapter->LinkStatus=LINKUP_DONE;
 				Adapter->bPHSEnabled = *(pucBuffer+3);
                	Adapter->bETHCSEnabled = *(pucBuffer+4) & ETH_CS_MASK;
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Recieved In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Received In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
 				if((FALSE == Adapter->bShutStatus)&&
 					(FALSE == Adapter->IdleMode))
 				{
@@ -1153,7 +1153,7 @@ int InitCardAndDownloadFirmware(PMINI_ADAPTER ps_adapter)
 
 	/*
      * 1. If the LED Settings fails, do not stop and do the Firmware download.
-     * 2. This init would happend only if the cfg file is present, else
+     * 2. This init would happened only if the cfg file is present, else
      *    call from the ioctl context.
      */
 
@@ -1185,7 +1185,7 @@ int InitCardAndDownloadFirmware(PMINI_ADAPTER ps_adapter)
 		status = PropagateCalParamsFromFlashToMemory(ps_adapter);
 		if(status)
 		{
-			BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL," Propogation of Cal param failed .." );
+			BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL," Propagation of Cal param failed .." );
 			goto OUT;
 		}
 	}
diff --git a/drivers/staging/bcm/Qos.c b/drivers/staging/bcm/Qos.c
index feade9451b2e..c97020f0fb6a 100644
--- a/drivers/staging/bcm/Qos.c
+++ b/drivers/staging/bcm/Qos.c
@@ -727,7 +727,7 @@ static BOOLEAN EthCSMatchVLANRules(S_CLASSIFIER_RULE *pstClassifierRule,struct s
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "%s  CLS UserPrio:%x CLS VLANID:%x\n",__FUNCTION__,ntohs(*((USHORT *)pstClassifierRule->usUserPriority)),pstClassifierRule->usVLANID);
 
-	/* In case FW didn't recieve the TLV, the priority field should be ignored */
+	/* In case FW didn't receive the TLV, the priority field should be ignored */
 	if(pstClassifierRule->usValidityBitMap & (1<<PKT_CLASSIFICATION_USER_PRIORITY_VALID))
 	{
 		if(pstEthCsPktInfo->eNwpktEthFrameType!=eEth802QVLANFrame)
diff --git a/drivers/staging/bcm/cntrl_SignalingInterface.h b/drivers/staging/bcm/cntrl_SignalingInterface.h
index 890778450a86..ab131806e2c9 100644
--- a/drivers/staging/bcm/cntrl_SignalingInterface.h
+++ b/drivers/staging/bcm/cntrl_SignalingInterface.h
@@ -21,7 +21,7 @@
 #define VENDOR_PHS_PARAM_LENGTH 10
 #define MAX_NUM_ACTIVE_BS 10
 #define AUTH_TOKEN_LENGTH	10
-#define NUM_HARQ_CHANNELS	16	//Changed from 10 to 16 to accomodate all HARQ channels
+#define NUM_HARQ_CHANNELS	16	//Changed from 10 to 16 to accommodate all HARQ channels
 #define VENDOR_CLASSIFIER_PARAM_LENGTH 1 //Changed the size to 1 byte since we dnt use it
 #define  VENDOR_SPECIF_QOS_PARAM 1
 #define VENDOR_PHS_PARAM_LENGTH	10
@@ -109,13 +109,13 @@ typedef struct _stPhsRuleSI {
     B_UINT8                         u8PHSI;
 	/**  PHSF Length Of The Service Flow*/
     B_UINT8                         u8PHSFLength;
-    /** String of bytes containing header information to be supressed by the sending CS and reconstructed by the receiving CS*/
+    /** String of bytes containing header information to be suppressed by the sending CS and reconstructed by the receiving CS*/
     B_UINT8                         u8PHSF[MAX_PHS_LENGTHS];
 	/**  PHSM Length Of The Service Flow*/
     B_UINT8                         u8PHSMLength;
 	/**  PHS Mask for the SF*/
     B_UINT8                         u8PHSM[MAX_PHS_LENGTHS];
-	/**  8bit Total number of bytes to be supressed for the Service Flow*/
+	/**  8bit Total number of bytes to be suppressed for the Service Flow*/
     B_UINT8                         u8PHSS;
 	/**  8bit Indicates whether or not Packet Header contents need to be verified prior to supression */
     B_UINT8                         u8PHSV;
diff --git a/drivers/staging/bcm/nvm.c b/drivers/staging/bcm/nvm.c
index c7292373a65f..4da5b7b54a1a 100644
--- a/drivers/staging/bcm/nvm.c
+++ b/drivers/staging/bcm/nvm.c
@@ -313,7 +313,7 @@ INT ReadMacAddressFromNVM(PMINI_ADAPTER Adapter)
 //		uiNumBytes - Number of bytes to be read from the EEPROM.
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if EEPROM read is successfull.
+//		OSAL_STATUS_SUCCESS - if EEPROM read is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -431,7 +431,7 @@ INT BeceemEEPROMBulkRead(
 //		uiNumBytes - Number of bytes to be read from the FLASH.
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if FLASH read is successfull.
+//		OSAL_STATUS_SUCCESS - if FLASH read is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -1174,7 +1174,7 @@ static INT BeceemFlashBulkWrite(
 	if(NULL == pTempBuff)
 		goto BeceemFlashBulkWrite_EXIT;
 //
-// check if the data to be written is overlapped accross sectors
+// check if the data to be written is overlapped across sectors
 //
 	if(uiOffset+uiNumBytes < uiSectBoundary)
 	{
@@ -1390,7 +1390,7 @@ static INT BeceemFlashBulkWriteStatus(
 		goto BeceemFlashBulkWriteStatus_EXIT;
 
 //
-// check if the data to be written is overlapped accross sectors
+// check if the data to be written is overlapped across sectors
 //
 	if(uiOffset+uiNumBytes < uiSectBoundary)
 	{
@@ -2020,7 +2020,7 @@ INT BeceemEEPROMBulkWrite(
 //		uiNumBytes - Number of bytes to be read from the NVM.
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if NVM read is successfull.
+//		OSAL_STATUS_SUCCESS - if NVM read is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -2083,7 +2083,7 @@ INT BeceemNVMRead(
 //		uiNumBytes - Number of bytes to be written..
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if NVM write is successfull.
+//		OSAL_STATUS_SUCCESS - if NVM write is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -2218,7 +2218,7 @@ INT BeceemNVMWrite(
 //          uiSectorSize - sector size
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if NVM write is successfull.
+//		OSAL_STATUS_SUCCESS - if NVM write is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -2430,7 +2430,7 @@ INT BcmInitNVM(PMINI_ADAPTER ps_adapter)
 *Input Parameter:
 *		Adapter data structure
 *Return Value :
-*		0. means sucess;
+*		0. means success;
 */
 /***************************************************************************/
 
@@ -2998,7 +2998,7 @@ INT BcmGetSectionValStartOffset(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlas
 	/*
 	*	Considering all the section for which end offset can be calculated or directly given
 	*	in CS Structure. if matching case does not exist, return STATUS_FAILURE indicating section
-	*	endoffset can't be calculated or given in CS Stucture.
+	*	endoffset can't be calculated or given in CS Structure.
 	*/
 
 	INT SectStartOffset = 0 ;
@@ -3173,7 +3173,7 @@ INT BcmGetSectionValEndOffset(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2
 *	@uiNumBytes : Number of Bytes for Read
 *
 *	Return value:-
-*		return true on sucess and STATUS_FAILURE on fail.
+*		return true on success and STATUS_FAILURE on fail.
 */
 
 INT BcmFlash2xBulkRead(
@@ -3241,7 +3241,7 @@ INT BcmFlash2xBulkRead(
 *	@uiNumBytes : Number of Bytes for Write
 *
 *	Return value:-
-*		return true on sucess and STATUS_FAILURE on fail.
+*		return true on success and STATUS_FAILURE on fail.
 *
 */
 
@@ -3308,7 +3308,7 @@ INT BcmFlash2xBulkWrite(
 *	@Adapter :-Drivers private Data Structure
 *
 *	Return Value:-
-*		Return STATUS_SUCESS if get sucess in setting the right DSD else negaive error code
+*		Return STATUS_SUCESS if get success in setting the right DSD else negaive error code
 *
 **/
 static INT BcmGetActiveDSD(PMINI_ADAPTER Adapter)
@@ -3384,7 +3384,7 @@ static INT BcmGetActiveISO(PMINI_ADAPTER Adapter)
 *	@uiOffset : Offset provided in the Flash
 *
 *	Return Value:-
-*	Sucess:-TRUE ,  offset is writable
+*	Success:-TRUE ,  offset is writable
 *	Failure:-FALSE, offset is RO
 *
 **/
@@ -3441,7 +3441,7 @@ static INT BcmDumpFlash2xSectionBitMap(PFLASH2X_BITMAP psFlash2xBitMap)
 	@Adapter:-Driver private Data Structure
 *
 *	Return value:-
-*	Sucess:- STATUS_SUCESS
+*	Success:- STATUS_SUCESS
 *	Failure:- negative error code
 **/
 
@@ -3783,7 +3783,7 @@ INT BcmSetActiveSection(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSectV
 					// This is a SPECIAL Case which will only happen if the current highest priority ISO has priority value = 0x7FFFFFFF.
 					// We will write 1 to the current Highest priority ISO And then shall increase the priority of the requested ISO
 					// by user
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happend, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
 					SectImagePriority = htonl(0x1);
 					Status = BcmFlash2xBulkWrite(Adapter,
 								&SectImagePriority,
@@ -3853,7 +3853,7 @@ INT BcmSetActiveSection(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSectV
 					// This is a SPECIAL Case which will only happen if the current highest priority DSD has priority value = 0x7FFFFFFF.
 					// We will write 1 to the current Highest priority DSD And then shall increase the priority of the requested DSD
 					// by user
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happend, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
 					SectImagePriority = htonl(0x1);
 
 					Status = BcmFlash2xBulkWrite(Adapter,
@@ -4119,7 +4119,7 @@ INT BcmCopyISO(PMINI_ADAPTER Adapter, FLASH2X_COPY_SECTION sCopySectStrut)
 												MAX_RW_SIZE);
 				IsThisHeaderSector = FALSE ;
 			}
-			//substracting the written Data
+			//subtracting the written Data
 			uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize ;
 		}
 
@@ -4250,7 +4250,7 @@ INT BcmCopyISO(PMINI_ADAPTER Adapter, FLASH2X_COPY_SECTION sCopySectStrut)
 				IsThisHeaderSector = FALSE ;
 			}
 
-			//substracting the written Data
+			//subtracting the written Data
 			uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize ;
 		}
 
@@ -4268,7 +4268,7 @@ BcmFlash2xCorruptSig : this API is used to corrupt the written sig in Bcm Header
 @eFlash2xSectionVal :- Flash section val which has header
 
 Return Value :-
-	Sucess :- If Section is present and writable, corrupt the sig and return STATUS_SUCCESS
+	Success :- If Section is present and writable, corrupt the sig and return STATUS_SUCCESS
 	Failure :-Return negative error code
 
 
@@ -4301,7 +4301,7 @@ BcmFlash2xWriteSig :-this API is used to Write the sig if requested Section has
 @eFlashSectionVal :- Flash section val which has header
 
 Return Value :-
-	Sucess :- If Section is present and writable write the sig and return STATUS_SUCCESS
+	Success :- If Section is present and writable write the sig and return STATUS_SUCCESS
 	Failure :-Return negative error code
 
 **/
@@ -4504,7 +4504,7 @@ BcmCopySection :- This API is used to copy the One section in another. Both sect
 			     in case of numofBytes  equal zero complete section will be copied.
 
 Return Values-
-	Sucess : Return STATUS_SUCCESS
+	Success : Return STATUS_SUCCESS
 	Faillure :- return negative error code
 
 **/
@@ -4621,7 +4621,7 @@ SaveHeaderIfPresent :- This API is use to Protect the Header in case of Header S
 @uiOffset :- Flash offset that has to be written.
 
 Return value :-
-	Sucess :- On sucess return STATUS_SUCCESS
+	Success :- On success return STATUS_SUCCESS
 	Faillure :- Return negative error code
 
 **/
@@ -4634,7 +4634,7 @@ INT SaveHeaderIfPresent(PMINI_ADAPTER Adapter, PUCHAR pBuff, UINT uiOffset)
 	UINT uiSectAlignAddr = 0;
 	UINT sig = 0;
 
-	//making the offset sector alligned
+	//making the offset sector aligned
 	uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
 
 
@@ -4643,7 +4643,7 @@ INT SaveHeaderIfPresent(PMINI_ADAPTER Adapter, PUCHAR pBuff, UINT uiOffset)
 	(uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter,DSD0)- Adapter->uiSectorSize))
 	{
 
-		//offset from the sector boundry having the header map
+		//offset from the sector boundary having the header map
 		offsetToProtect = Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader % Adapter->uiSectorSize;
 		HeaderSizeToProtect = sizeof(DSD_HEADER);
 		bHasHeader = TRUE ;
@@ -4697,7 +4697,7 @@ BcmDoChipSelect : This will selcet the appropriate chip for writing.
 @Adapater :- Bcm Driver Private Data Structure
 
 OutPut:-
-	Select the Appropriate chip and retrn status Sucess
+	Select the Appropriate chip and retrn status Success
 **/
 static INT BcmDoChipSelect(PMINI_ADAPTER Adapter, UINT offset)
 {
@@ -5086,7 +5086,7 @@ static INT CorruptDSDSig(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSect
 	{
 		if(IsSectionWritable(Adapter,eFlash2xSectionVal) != TRUE)
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence cant Corrupt signature");
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Corrupt signature");
 			return SECTOR_IS_NOT_WRITABLE;
 		}
 	}
@@ -5155,7 +5155,7 @@ static INT CorruptISOSig(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSect
 
 	if(IsSectionWritable(Adapter,eFlash2xSectionVal) != TRUE)
 	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence cant Corrupt signature");
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Corrupt signature");
 		return SECTOR_IS_NOT_WRITABLE;
 	}