diff options
| author | Russell King <rmk@dyn-67.arm.linux.org.uk> | 2005-06-27 11:12:54 +0100 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2005-06-27 11:12:54 +0100 |
| commit | ec9f47cd6a14ca069bb7552a984c0a338fc7262b (patch) | |
| tree | 61f26f0bd348c6ddac8b3b1105e00fa790ea3ea6 /drivers/serial/Makefile | |
| parent | addcc4a10f10ffde88b2ee6dc3af46fab6dff1e2 (diff) | |
| download | linux-ec9f47cd6a14ca069bb7552a984c0a338fc7262b.tar.bz2 | |
[PATCH] Serial: Split 8250 port table
Add separate files for the different 8250 ISA-based serial boards.
Looking across all the various architectures, it seems reasonable that
we can key the availability of the configuration options for these
beasts to the bus-related symbols (iow, CONFIG_ISA). We also standardise
the base baud/uart clock rate for these boards - I'm sure that isn't
architecture specific, but is solely dependent on the crystal fitted
on the board (which should be the same no matter what type of machine
its fitted into.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/serial/Makefile')
| -rw-r--r-- | drivers/serial/Makefile | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 8f1cdde7dbed..65bd4381685e 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -17,6 +17,11 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y) obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o +obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o +obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o +obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o |