Merge branch 'for-next' into for-linus

Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c

10 files changed, 13 insertions, 13 deletions

diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 208d6df9ed59..ff5716d5f044 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -492,7 +492,7 @@ static void init_alloc_map(struct orc_host * host)
  *	init_orchid		-	initialise the host adapter
  *	@host:host adapter to initialise
  *
- *	Initialise the controller and if neccessary load the firmware.
+ *	Initialise the controller and if necessary load the firmware.
  *
  *	Returns -1 if the initialisation fails.
  */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 89a59484be02..a7714160fbc3 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -531,7 +531,7 @@ static void initio_read_eeprom(unsigned long base)
  *	initio_stop_bm		-	stop bus master
  *	@host: InitIO we are stopping
  *
- *	Stop any pending DMA operation, aborting the DMA if neccessary
+ *	Stop any pending DMA operation, aborting the DMA if necessary
  */
 
 static void initio_stop_bm(struct initio_host * host)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 6fde2fabfd9b..774e7ac837a5 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -48,7 +48,7 @@ struct kmem_cache *scsi_pkt_cachep;
 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
-#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowleged */
+#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
@@ -519,7 +519,7 @@ crc_err:
  *
  * Called after receiving a Transfer Ready data descriptor.
  * If the LLD is capable of sequence offload then send down the
- * seq_blen ammount of data in single frame, otherwise send
+ * seq_blen amount of data in single frame, otherwise send
  * multiple frames of the maximum frame payload supported by
  * the target port.
  */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 08b6634cb994..2a40a6eabf4d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -981,7 +981,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
  * function returns, it does not guarantee all the IOCBs are actually aborted.
  *
  * Return code
- *   0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0)
+ *   0 - Successfully issued abort iocb on all outstanding flogis (Always 0)
  **/
 int
 lpfc_els_abort_flogi(struct lpfc_hba *phba)
@@ -3129,7 +3129,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 	    (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) {
 		/* A LS_RJT associated with Default RPI cleanup has its own
-		 * seperate code path.
+		 * separate code path.
 		 */
 		if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI))
 			ls_rjt = 1;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 7f21b47db791..483fb74bc592 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1575,7 +1575,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
 		case LPFC_PG_TYPE_NO_DIF:
 			num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
 					datasegcnt);
-			/* we shoud have 2 or more entries in buffer list */
+			/* we should have 2 or more entries in buffer list */
 			if (num_bde < 2)
 				goto err;
 			break;
@@ -1612,7 +1612,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
 
 			num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
 					datasegcnt, protsegcnt);
-			/* we shoud have 3 or more entries in buffer list */
+			/* we should have 3 or more entries in buffer list */
 			if (num_bde < 3)
 				goto err;
 			break;
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index 7db28cd49446..8c61a4fe1db9 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -187,7 +187,7 @@
 #define S_IO		BIT(1)    /* Input/Output line from SCSI bus */
 #define S_CD		BIT(2)    /* Command/Data line from SCSI bus */
 #define S_BUSY		BIT(3)    /* Busy line from SCSI bus         */
-#define S_ACK		BIT(4)    /* Acknowlege line from SCSI bus   */
+#define S_ACK		BIT(4)    /* Acknowledge line from SCSI bus  */
 #define S_REQUEST	BIT(5)    /* Request line from SCSI bus      */
 #define S_SELECT	BIT(6)	  /*                                 */
 #define S_ATN		BIT(7)	  /*                                 */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9b44c6f1b10e..7985ae45d688 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2924,7 +2924,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		break;
 	default:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk("unkown device type(%x)\n", deviceType));
+			pm8001_printk("unknown device type(%x)\n", deviceType));
 		break;
 	}
 	phy->phy_type |= PORT_TYPE_SAS;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 7f9c83a76390..3b2c98fba834 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -600,7 +600,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
   * device ID(according to device's sas address) and returned it to LLDD. From
   * now on, we communicate with HBA FW with the device ID which HBA assigned
-  * rather than sas address. it is the neccessary step for our HBA but it is
+  * rather than sas address. it is the necessary step for our HBA but it is
   * the optional for other HBA driver.
   */
 static int pm8001_dev_found_notify(struct domain_device *dev)
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 92f89d50850c..b8ad07c3449e 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -938,7 +938,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
 
 /*
  * pmcraid_ioctl_header - definition of header structure that preceeds all the
- * buffers given as ioctl arguements.
+ * buffers given as ioctl arguments.
  *
  * .signature           : always ASCII string, "PMCRAID"
  * .reserved            : not used
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1dd4d8407694..83881dfb33c0 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2111,7 +2111,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
  *	which is followed by sdaaa.
  *
  *	This is basically 26 base counting with one extra 'nil' entry
- *	at the beggining from the second digit on and can be
+ *	at the beginning from the second digit on and can be
  *	determined using similar method as 26 base conversion with the
  *	index shifted -1 after each digit is computed.
  *