diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-18 12:35:17 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-18 12:35:17 -0800 |
| commit | d71f5be276bf79eda14c40f3cafcf827326f10cb (patch) | |
| tree | 581dadb90b06b950882a8eb75deee23d3370a4ab /drivers/scsi | |
| parent | 92b5abbb44e05cdbc4483219f30a435dd871a8ea (diff) | |
| parent | 76ffe8a3f766358a0ade543153625b3e4e66159d (diff) | |
| download | linux-d71f5be276bf79eda14c40f3cafcf827326f10cb.tar.bz2 | |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
SCSI updates on 20120118
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits)
[SCSI] libfc: remove redundant timer init for fcp
[SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c
[SCSI] libfc: Declare local functions static
[SCSI] fcoe: fix regression on offload em matching function for initiator/target
[SCSI] qla4xxx: Update driver version to 5.02.00-k12
[SCSI] qla4xxx: Cleanup modinfo display
[SCSI] qla4xxx: Update license
[SCSI] qla4xxx: Clear the RISC interrupt bit during FW init
[SCSI] qla4xxx: Added error logging for firmware abort
[SCSI] qla4xxx: Disable generating pause frames in case of FW hung
[SCSI] qla4xxx: Temperature monitoring for ISP82XX core.
[SCSI] megaraid: fix sparse warnings
[SCSI] sg: convert to kstrtoul_from_user()
[SCSI] don't change sdev starvation list order without request dispatched
[SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state
[SCSI] isci: fix start OOB
[SCSI] isci: fix io failures while wide port links are coming up
[SCSI] isci: allow more time for wide port targets
[SCSI] isci: enable wide port targets
[SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode.
...
Diffstat (limited to 'drivers/scsi')
56 files changed, 1179 insertions, 1441 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 06ea3bcfdd2a..16570aa84aac 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -830,16 +830,11 @@ config SCSI_ISCI tristate "Intel(R) C600 Series Chipset SAS Controller" depends on PCI && SCSI depends on X86 - # (temporary): known alpha quality driver - depends on EXPERIMENTAL select SCSI_SAS_LIBSAS - select SCSI_SAS_HOST_SMP ---help--- This driver supports the 6Gb/s SAS capabilities of the storage control unit found in the Intel(R) C600 series chipset. - The experimental tag will be removed after the driver exits alpha - config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h index 78963be2c4fb..cb07c628b2f1 100644 --- a/drivers/scsi/bfa/bfa_defs_svc.h +++ b/drivers/scsi/bfa/bfa_defs_svc.h @@ -673,12 +673,7 @@ struct bfa_itnim_iostats_s { u32 tm_iocdowns; /* TM cleaned-up due to IOC down */ u32 tm_cleanups; /* TM cleanup requests */ u32 tm_cleanup_comps; /* TM cleanup completions */ - u32 lm_lun_across_sg; /* LM lun is across sg data buf */ - u32 lm_lun_not_sup; /* LM lun not supported */ - u32 lm_rpl_data_changed; /* LM report-lun data changed */ - u32 lm_wire_residue_changed; /* LM report-lun rsp residue changed */ - u32 lm_small_buf_addresidue; /* LM buf smaller than reported cnt */ - u32 lm_lun_not_rdy; /* LM lun not ready */ + u32 rsvd[6]; }; /* Modify char* port_stt[] in bfal_port.c if a new state was added */ diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h index 50b6a1c86195..8d0b88f67a38 100644 --- a/drivers/scsi/bfa/bfa_fc.h +++ b/drivers/scsi/bfa/bfa_fc.h @@ -56,161 +56,6 @@ struct scsi_cdb_s { #define SCSI_MAX_ALLOC_LEN 0xFF /* maximum allocarion length */ -#define SCSI_SENSE_CUR_ERR 0x70 -#define SCSI_SENSE_DEF_ERR 0x71 - -/* - * SCSI additional sense codes - */ -#define SCSI_ASC_LUN_NOT_READY 0x04 -#define SCSI_ASC_LUN_NOT_SUPPORTED 0x25 -#define SCSI_ASC_TOCC 0x3F - -/* - * SCSI additional sense code qualifiers - */ -#define SCSI_ASCQ_MAN_INTR_REQ 0x03 /* manual intervention req */ -#define SCSI_ASCQ_RL_DATA_CHANGED 0x0E /* report luns data changed */ - -/* - * Methods of reporting informational exceptions - */ -#define SCSI_MP_IEC_UNIT_ATTN 0x2 /* generate unit attention */ - -struct scsi_report_luns_data_s { - u32 lun_list_length; /* length of LUN list length */ - u32 reserved; - struct scsi_lun lun[1]; /* first LUN in lun list */ -}; - -struct scsi_inquiry_vendor_s { - u8 vendor_id[8]; -}; - -struct scsi_inquiry_prodid_s { - u8 product_id[16]; -}; - -struct scsi_inquiry_prodrev_s { - u8 product_rev[4]; -}; - -struct scsi_inquiry_data_s { -#ifdef __BIG_ENDIAN - u8 peripheral_qual:3; /* peripheral qualifier */ - u8 device_type:5; /* peripheral device type */ - u8 rmb:1; /* removable medium bit */ - u8 device_type_mod:7; /* device type modifier */ - u8 version; - u8 aenc:1; /* async evt notification capability */ - u8 trm_iop:1; /* terminate I/O process */ - u8 norm_aca:1; /* normal ACA supported */ - u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */ - u8 rsp_data_format:4; - u8 additional_len; - u8 sccs:1; - u8 reserved1:7; - u8 reserved2:1; - u8 enc_serv:1; /* enclosure service component */ - u8 reserved3:1; - u8 multi_port:1; /* multi-port device */ - u8 m_chngr:1; /* device in medium transport element */ - u8 ack_req_q:1; /* SIP specific bit */ - u8 addr32:1; /* SIP specific bit */ - u8 addr16:1; /* SIP specific bit */ - u8 rel_adr:1; /* relative address */ - u8 w_bus32:1; - u8 w_bus16:1; - u8 synchronous:1; - u8 linked_commands:1; - u8 trans_dis:1; - u8 cmd_queue:1; /* command queueing supported */ - u8 soft_reset:1; /* soft reset alternative (VS) */ -#else - u8 device_type:5; /* peripheral device type */ - u8 peripheral_qual:3; /* peripheral qualifier */ - u8 device_type_mod:7; /* device type modifier */ - u8 rmb:1; /* removable medium bit */ - u8 version; - u8 rsp_data_format:4; - u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */ - u8 norm_aca:1; /* normal ACA supported */ - u8 terminate_iop:1;/* terminate I/O process */ - u8 aenc:1; /* async evt notification capability */ - u8 additional_len; - u8 reserved1:7; - u8 sccs:1; - u8 addr16:1; /* SIP specific bit */ - u8 addr32:1; /* SIP specific bit */ - u8 ack_req_q:1; /* SIP specific bit */ - u8 m_chngr:1; /* device in medium transport element */ - u8 multi_port:1; /* multi-port device */ - u8 reserved3:1; /* TBD - Vendor Specific */ - u8 enc_serv:1; /* enclosure service component */ - u8 reserved2:1; - u8 soft_seset:1; /* soft reset alternative (VS) */ - u8 cmd_queue:1; /* command queueing supported */ - u8 trans_dis:1; - u8 linked_commands:1; - u8 synchronous:1; - u8 w_bus16:1; - u8 w_bus32:1; - u8 rel_adr:1; /* relative address */ -#endif - struct scsi_inquiry_vendor_s vendor_id; - struct scsi_inquiry_prodid_s product_id; - struct scsi_inquiry_prodrev_s product_rev; - u8 vendor_specific[20]; - u8 reserved4[40]; -}; - -/* - * SCSI sense data format - */ -struct scsi_sense_s { -#ifdef __BIG_ENDIAN - u8 valid:1; - u8 rsp_code:7; -#else - u8 rsp_code:7; - u8 valid:1; -#endif - u8 seg_num; -#ifdef __BIG_ENDIAN - u8 file_mark:1; - u8 eom:1; /* end of media */ - u8 ili:1; /* incorrect length indicator */ - u8 reserved:1; - u8 sense_key:4; -#else - u8 sense_key:4; - u8 reserved:1; - u8 ili:1; /* incorrect length indicator */ - u8 eom:1; /* end of media */ - u8 file_mark:1; -#endif - u8 information[4]; /* device-type or cmd specific info */ - u8 add_sense_length; /* additional sense length */ - u8 command_info[4];/* command specific information */ - u8 asc; /* additional sense code */ - u8 ascq; /* additional sense code qualifier */ - u8 fru_code; /* field replaceable unit code */ -#ifdef __BIG_ENDIAN - u8 sksv:1; /* sense key specific valid */ - u8 c_d:1; /* command/data bit */ - u8 res1:2; - u8 bpv:1; /* bit pointer valid */ - u8 bpointer:3; /* bit pointer */ -#else - u8 bpointer:3; /* bit pointer */ - u8 bpv:1; /* bit pointer valid */ - u8 res1:2; - u8 c_d:1; /* command/data bit */ - u8 sksv:1; /* sense key specific valid */ -#endif - u8 fpointer[2]; /* field pointer */ -}; - /* * Fibre Channel Header Structure (FCHS) definition */ diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c index e07bd4745d8b..f0f80e282e39 100644 --- a/drivers/scsi/bfa/bfa_fcpim.c +++ b/drivers/scsi/bfa/bfa_fcpim.c @@ -24,8 +24,6 @@ BFA_TRC_FILE(HAL, FCPIM); * BFA ITNIM Related definitions */ static void bfa_itnim_update_del_itn_stats(struct bfa_itnim_s *itnim); -static bfa_boolean_t bfa_ioim_lm_proc_rpl_data(struct bfa_ioim_s *ioim); -static bfa_boolean_t bfa_ioim_lm_proc_inq_data(struct bfa_ioim_s *ioim); static void bfa_ioim_lm_init(struct bfa_s *bfa); #define BFA_ITNIM_FROM_TAG(_fcpim, _tag) \ @@ -60,14 +58,6 @@ static void bfa_ioim_lm_init(struct bfa_s *bfa); } \ } while (0) -#define bfa_ioim_rp_wwn(__ioim) \ - (((struct bfa_fcs_rport_s *) \ - (__ioim)->itnim->rport->rport_drv)->pwwn) - -#define bfa_ioim_lp_wwn(__ioim) \ - ((BFA_LPS_FROM_TAG(BFA_LPS_MOD((__ioim)->bfa), \ - (__ioim)->itnim->rport->rport_info.lp_tag))->pwwn) \ - #define bfa_itnim_sler_cb(__itnim) do { \ if ((__itnim)->bfa->fcs) \ bfa_cb_itnim_sler((__itnim)->ditn); \ @@ -77,13 +67,6 @@ static void bfa_ioim_lm_init(struct bfa_s *bfa); } \ } while (0) -enum bfa_ioim_lm_status { - BFA_IOIM_LM_PRESENT = 1, - BFA_IOIM_LM_LUN_NOT_SUP = 2, - BFA_IOIM_LM_RPL_DATA_CHANGED = 3, - BFA_IOIM_LM_LUN_NOT_RDY = 4, -}; - enum bfa_ioim_lm_ua_status { BFA_IOIM_LM_UA_RESET = 0, BFA_IOIM_LM_UA_SET = 1, @@ -145,9 +128,6 @@ enum bfa_ioim_event { BFA_IOIM_SM_TMDONE = 16, /* IO cleanup from tskim */ BFA_IOIM_SM_HWFAIL = 17, /* IOC h/w failure event */ BFA_IOIM_SM_IOTOV = 18, /* ITN offline TOV */ - BFA_IOIM_SM_LM_LUN_NOT_SUP = 19,/* lunmask lun not supported */ - BFA_IOIM_SM_LM_RPL_DC = 20, /* lunmask report-lun data changed */ - BFA_IOIM_SM_LM_LUN_NOT_RDY = 21,/* lunmask lun not ready */ }; @@ -245,9 +225,6 @@ static void __bfa_cb_ioim_abort(void *cbarg, bfa_boolean_t complete); static void __bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete); static void __bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete); static bfa_boolean_t bfa_ioim_is_abortable(struct bfa_ioim_s *ioim); -static void __bfa_cb_ioim_lm_lun_not_sup(void *cbarg, bfa_boolean_t complete); -static void __bfa_cb_ioim_lm_rpl_dc(void *cbarg, bfa_boolean_t complete); -static void __bfa_cb_ioim_lm_lun_not_rdy(void *cbarg, bfa_boolean_t complete); /* * forward declaration of BFA IO state machine @@ -445,12 +422,6 @@ bfa_fcpim_add_stats(struct bfa_itnim_iostats_s *lstats, bfa_fcpim_add_iostats(lstats, rstats, output_reqs); bfa_fcpim_add_iostats(lstats, rstats, rd_throughput); bfa_fcpim_add_iostats(lstats, rstats, wr_throughput); - bfa_fcpim_add_iostats(lstats, rstats, lm_lun_across_sg); - bfa_fcpim_add_iostats(lstats, rstats, lm_lun_not_sup); - bfa_fcpim_add_iostats(lstats, rstats, lm_rpl_data_changed); - bfa_fcpim_add_iostats(lstats, rstats, lm_wire_residue_changed); - bfa_fcpim_add_iostats(lstats, rstats, lm_small_buf_addresidue); - bfa_fcpim_add_iostats(lstats, rstats, lm_lun_not_rdy); } bfa_status_t @@ -1580,27 +1551,6 @@ bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event) __bfa_cb_ioim_abort, ioim); break; - case BFA_IOIM_SM_LM_LUN_NOT_SUP: - bfa_sm_set_state(ioim, bfa_ioim_sm_hcb); - bfa_ioim_move_to_comp_q(ioim); - bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, - __bfa_cb_ioim_lm_lun_not_sup, ioim); - break; - - case BFA_IOIM_SM_LM_RPL_DC: - bfa_sm_set_state(ioim, bfa_ioim_sm_hcb); - bfa_ioim_move_to_comp_q(ioim); - bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, - __bfa_cb_ioim_lm_rpl_dc, ioim); - break; - - case BFA_IOIM_SM_LM_LUN_NOT_RDY: - bfa_sm_set_state(ioim, bfa_ioim_sm_hcb); - bfa_ioim_move_to_comp_q(ioim); - bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, - __bfa_cb_ioim_lm_lun_not_rdy, ioim); - break; - default: bfa_sm_fault(ioim->bfa, event); } @@ -2160,243 +2110,6 @@ bfa_ioim_lm_init(struct bfa_s *bfa) } } -/* - * Validate LUN for LUN masking - */ -static enum bfa_ioim_lm_status -bfa_ioim_lm_check(struct bfa_ioim_s *ioim, struct bfa_lps_s *lps, - struct bfa_rport_s *rp, struct scsi_lun lun) -{ - u8 i; - struct bfa_lun_mask_s *lun_list = bfa_get_lun_mask_list(ioim->bfa); - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)ioim->dio; - struct scsi_cdb_s *cdb = (struct scsi_cdb_s *)cmnd->cmnd; - - if ((cdb->scsi_cdb[0] == REPORT_LUNS) && - (scsilun_to_int((struct scsi_lun *)&lun) == 0)) { - ioim->proc_rsp_data = bfa_ioim_lm_proc_rpl_data; - return BFA_IOIM_LM_PRESENT; - } - - for (i = 0; i < MAX_LUN_MASK_CFG; i++) { - - if (lun_list[i].state != BFA_IOIM_LUN_MASK_ACTIVE) - continue; - - if ((scsilun_to_int((struct scsi_lun *)&lun_list[i].lun) == - scsilun_to_int((struct scsi_lun *)&lun)) - && (rp->rport_tag == lun_list[i].rp_tag) - && ((u8)ioim->itnim->rport->rport_info.lp_tag == - lun_list[i].lp_tag)) { - bfa_trc(ioim->bfa, lun_list[i].rp_tag); - bfa_trc(ioim->bfa, lun_list[i].lp_tag); - bfa_trc(ioim->bfa, scsilun_to_int( - (struct scsi_lun *)&lun_list[i].lun)); - - if ((lun_list[i].ua == BFA_IOIM_LM_UA_SET) && - ((cdb->scsi_cdb[0] != INQUIRY) || - (cdb->scsi_cdb[0] != REPORT_LUNS))) { - lun_list[i].ua = BFA_IOIM_LM_UA_RESET; - return BFA_IOIM_LM_RPL_DATA_CHANGED; - } - - if (cdb->scsi_cdb[0] == REPORT_LUNS) - ioim->proc_rsp_data = bfa_ioim_lm_proc_rpl_data; - - return BFA_IOIM_LM_PRESENT; - } - } - - if ((cdb->scsi_cdb[0] == INQUIRY) && - (scsilun_to_int((struct scsi_lun *)&lun) == 0)) { - ioim->proc_rsp_data = bfa_ioim_lm_proc_inq_data; - return BFA_IOIM_LM_PRESENT; - } - - if (cdb->scsi_cdb[0] == TEST_UNIT_READY) - return BFA_IOIM_LM_LUN_NOT_RDY; - - return BFA_IOIM_LM_LUN_NOT_SUP; -} - -static bfa_boolean_t -bfa_ioim_lm_proc_rsp_data_dummy(struct bfa_ioim_s *ioim) -{ - return BFA_TRUE; -} - -static void -bfa_ioim_lm_fetch_lun(struct bfa_ioim_s *ioim, u8 *rl_data, int offset, - int buf_lun_cnt) -{ - struct bfa_lun_mask_s *lun_list = bfa_get_lun_mask_list(ioim->bfa); - struct scsi_lun *lun_data = (struct scsi_lun *)(rl_data + offset); - struct scsi_lun lun; - int i, j; - - bfa_trc(ioim->bfa, buf_lun_cnt); - for (j = 0; j < buf_lun_cnt; j++) { - lun = *((struct scsi_lun *)(lun_data + j)); - for (i = 0; i < MAX_LUN_MASK_CFG; i++) { - if (lun_list[i].state != BFA_IOIM_LUN_MASK_ACTIVE) - continue; - if ((lun_list[i].rp_wwn == bfa_ioim_rp_wwn(ioim)) && - (lun_list[i].lp_wwn == bfa_ioim_lp_wwn(ioim)) && - (scsilun_to_int((struct scsi_lun *)&lun_list[i].lun) - == scsilun_to_int((struct scsi_lun *)&lun))) { - lun_list[i].state = BFA_IOIM_LUN_MASK_FETCHED; - break; - } - } /* next lun in mask DB */ - } /* next lun in buf */ -} - -static int -bfa_ioim_lm_update_lun_sg(struct bfa_ioim_s *ioim, u32 *pgdlen, - struct scsi_report_luns_data_s *rl) -{ - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)ioim->dio; - struct scatterlist *sg = scsi_sglist(cmnd); - struct bfa_lun_mask_s *lun_list = bfa_get_lun_mask_list(ioim->bfa); - struct scsi_lun *prev_rl_data = NULL, *base_rl_data; - int i, j, sgeid, lun_fetched_cnt = 0, prev_sg_len = 0, base_count; - int lun_across_sg_bytes, bytes_from_next_buf; - u64 last_lun, temp_last_lun; - - /* fetch luns from the first sg element */ - bfa_ioim_lm_fetch_lun(ioim, (u8 *)(rl->lun), 0, - (sg_dma_len(sg) / sizeof(struct scsi_lun)) - 1); - - /* fetch luns from multiple sg elements */ - scsi_for_each_sg(cmnd, sg, scsi_sg_count(cmnd), sgeid) { - if (sgeid == 0) { - prev_sg_len = sg_dma_len(sg); - prev_rl_data = (struct scsi_lun *) - phys_to_virt(sg_dma_address(sg)); - continue; - } - - /* if the buf is having more data */ - lun_across_sg_bytes = prev_sg_len % sizeof(struct scsi_lun); - if (lun_across_sg_bytes) { - bfa_trc(ioim->bfa, lun_across_sg_bytes); - bfa_stats(ioim->itnim, lm_lun_across_sg); - bytes_from_next_buf = sizeof(struct scsi_lun) - - lun_across_sg_bytes; - - /* from next buf take higher bytes */ - temp_last_lun = *((u64 *) - phys_to_virt(sg_dma_address(sg))); - last_lun |= temp_last_lun >> - (lun_across_sg_bytes * BITS_PER_BYTE); - - /* from prev buf take higher bytes */ - temp_last_lun = *((u64 *)(prev_rl_data + - (prev_sg_len - lun_across_sg_bytes))); - temp_last_lun >>= bytes_from_next_buf * BITS_PER_BYTE; - last_lun = last_lun | (temp_last_lun << - (bytes_from_next_buf * BITS_PER_BYTE)); - - bfa_ioim_lm_fetch_lun(ioim, (u8 *)&last_lun, 0, 1); - } else - bytes_from_next_buf = 0; - - *pgdlen += sg_dma_len(sg); - prev_sg_len = sg_dma_len(sg); - prev_rl_data = (struct scsi_lun *) - phys_to_virt(sg_dma_address(sg)); - bfa_ioim_lm_fetch_lun(ioim, (u8 *)prev_rl_data, - bytes_from_next_buf, - sg_dma_len(sg) / sizeof(struct scsi_lun)); - } - - /* update the report luns data - based on fetched luns */ - sg = scsi_sglist(cmnd); - base_rl_data = (struct scsi_lun *)rl->lun; - base_count = (sg_dma_len(sg) / sizeof(struct scsi_lun)) - 1; - for (i = 0, j = 0; i < MAX_LUN_MASK_CFG; i++) { - if (lun_list[i].state == BFA_IOIM_LUN_MASK_FETCHED) { - base_rl_data[j] = lun_list[i].lun; - lun_list[i].state = BFA_IOIM_LUN_MASK_ACTIVE; - j++; - lun_fetched_cnt++; - } - - if (j > base_count) { - j = 0; - sg = sg_next(sg); - base_rl_data = (struct scsi_lun *) - phys_to_virt(sg_dma_address(sg)); - base_count = sg_dma_len(sg) / sizeof(struct scsi_lun); - } - } - - bfa_trc(ioim->bfa, lun_fetched_cnt); - return lun_fetched_cnt; -} - -static bfa_boolean_t -bfa_ioim_lm_proc_inq_data(struct bfa_ioim_s *ioim) -{ - struct scsi_inquiry_data_s *inq; - struct scatterlist *sg = scsi_sglist((struct scsi_cmnd *)ioim->dio); - - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; - inq = (struct scsi_inquiry_data_s *)phys_to_virt(sg_dma_address(sg)); - - bfa_trc(ioim->bfa, inq->device_type); - inq->peripheral_qual = SCSI_INQ_PQ_NOT_CON; - return 0; -} - -static bfa_boolean_t -bfa_ioim_lm_proc_rpl_data(struct bfa_ioim_s *ioim) -{ - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)ioim->dio; - struct scatterlist *sg = scsi_sglist(cmnd); - struct bfi_ioim_rsp_s *m; - struct scsi_report_luns_data_s *rl = NULL; - int lun_count = 0, lun_fetched_cnt = 0; - u32 residue, pgdlen = 0; - - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; - if (bfa_get_lun_mask_status(ioim->bfa) != BFA_LUNMASK_ENABLED) - return BFA_TRUE; - - m = (struct bfi_ioim_rsp_s *) &ioim->iosp->comp_rspmsg; - if (m->scsi_status == SCSI_STATUS_CHECK_CONDITION) - return BFA_TRUE; - - pgdlen = sg_dma_len(sg); - bfa_trc(ioim->bfa, pgdlen); - rl = (struct scsi_report_luns_data_s *)phys_to_virt(sg_dma_address(sg)); - lun_count = cpu_to_be32(rl->lun_list_length) / sizeof(struct scsi_lun); - lun_fetched_cnt = bfa_ioim_lm_update_lun_sg(ioim, &pgdlen, rl); - - if (lun_count == lun_fetched_cnt) - return BFA_TRUE; - - bfa_trc(ioim->bfa, lun_count); - bfa_trc(ioim->bfa, lun_fetched_cnt); - bfa_trc(ioim->bfa, be32_to_cpu(rl->lun_list_length)); - - if (be32_to_cpu(rl->lun_list_length) <= pgdlen) - rl->lun_list_length = be32_to_cpu(lun_fetched_cnt) * - sizeof(struct scsi_lun); - else - bfa_stats(ioim->itnim, lm_small_buf_addresidue); - - bfa_trc(ioim->bfa, be32_to_cpu(rl->lun_list_length)); - bfa_trc(ioim->bfa, be32_to_cpu(m->residue)); - - residue = be32_to_cpu(m->residue); - residue += (lun_count - lun_fetched_cnt) * sizeof(struct scsi_lun); - bfa_stats(ioim->itnim, lm_wire_residue_changed); - m->residue = be32_to_cpu(residue); - bfa_trc(ioim->bfa, ioim->nsges); - return BFA_FALSE; -} - static void __bfa_cb_ioim_good_comp(void *cbarg, bfa_boolean_t complete) { @@ -2454,83 +2167,6 @@ __bfa_cb_ioim_comp(void *cbarg, bfa_boolean_t complete) m->scsi_status, sns_len, snsinfo, residue); } -static void -__bfa_cb_ioim_lm_lun_not_sup(void *cbarg, bfa_boolean_t complete) -{ - struct bfa_ioim_s *ioim = cbarg; - int sns_len = 0xD; - u32 residue = scsi_bufflen((struct scsi_cmnd *)ioim->dio); - struct scsi_sense_s *snsinfo; - - if (!complete) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB); - return; - } - - snsinfo = (struct scsi_sense_s *)BFA_SNSINFO_FROM_TAG( - ioim->fcpim->fcp, ioim->iotag); - snsinfo->rsp_code = SCSI_SENSE_CUR_ERR; - snsinfo->add_sense_length = 0xa; - snsinfo->asc = SCSI_ASC_LUN_NOT_SUPPORTED; - snsinfo->sense_key = ILLEGAL_REQUEST; - bfa_trc(ioim->bfa, residue); - bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_OK, - SCSI_STATUS_CHECK_CONDITION, sns_len, - (u8 *)snsinfo, residue); -} - -static void -__bfa_cb_ioim_lm_rpl_dc(void *cbarg, bfa_boolean_t complete) -{ - struct bfa_ioim_s *ioim = cbarg; - int sns_len = 0xD; - u32 residue = scsi_bufflen((struct scsi_cmnd *)ioim->dio); - struct scsi_sense_s *snsinfo; - - if (!complete) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB); - return; - } - - snsinfo = (struct scsi_sense_s *)BFA_SNSINFO_FROM_TAG(ioim->fcpim->fcp, - ioim->iotag); - snsinfo->rsp_code = SCSI_SENSE_CUR_ERR; - snsinfo->sense_key = SCSI_MP_IEC_UNIT_ATTN; - snsinfo->asc = SCSI_ASC_TOCC; - snsinfo->add_sense_length = 0x6; - snsinfo->ascq = SCSI_ASCQ_RL_DATA_CHANGED; - bfa_trc(ioim->bfa, residue); - bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_OK, - SCSI_STATUS_CHECK_CONDITION, sns_len, - (u8 *)snsinfo, residue); -} - -static void -__bfa_cb_ioim_lm_lun_not_rdy(void *cbarg, bfa_boolean_t complete) -{ - struct bfa_ioim_s *ioim = cbarg; - int sns_len = 0xD; - u32 residue = scsi_bufflen((struct scsi_cmnd *)ioim->dio); - struct scsi_sense_s *snsinfo; - - if (!complete) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB); - return; - } - - snsinfo = (struct scsi_sense_s *)BFA_SNSINFO_FROM_TAG( - ioim->fcpim->fcp, ioim->iotag); - snsinfo->rsp_code = SCSI_SENSE_CUR_ERR; - snsinfo->add_sense_length = 0xa; - snsinfo->sense_key = NOT_READY; - snsinfo->asc = SCSI_ASC_LUN_NOT_READY; - snsinfo->ascq = SCSI_ASCQ_MAN_INTR_REQ; - bfa_trc(ioim->bfa, residue); - bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_OK, - SCSI_STATUS_CHECK_CONDITION, sns_len, - (u8 *)snsinfo, residue); -} - void bfa_fcpim_lunmask_rp_update(struct bfa_s *bfa, wwn_t lp_wwn, wwn_t rp_wwn, u16 rp_tag, u8 lp_tag) @@ -2647,7 +2283,8 @@ bfa_fcpim_lunmask_add(struct bfa_s *bfa, u16 vf_id, wwn_t *pwwn, if (port) { *pwwn = port->port_cfg.pwwn; rp_fcs = bfa_fcs_lport_get_rport_by_pwwn(port, rpwwn); - rp = rp_fcs->bfa_rport; + if (rp_fcs) + rp = rp_fcs->bfa_rport; } lunm_list = bfa_get_lun_mask_list(bfa); @@ -2715,7 +2352,8 @@ bfa_fcpim_lunmask_delete(struct bfa_s *bfa, u16 vf_id, wwn_t *pwwn, if (port) { *pwwn = port->port_cfg.pwwn; rp_fcs = bfa_fcs_lport_get_rport_by_pwwn(port, rpwwn); - rp = rp_fcs->bfa_rport; + if (rp_fcs) + rp = rp_fcs->bfa_rport; } } @@ -2757,7 +2395,6 @@ __bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete) return; } - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_ABORTED, 0, 0, NULL, 0); } @@ -2773,7 +2410,6 @@ __bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete) return; } - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_PATHTOV, 0, 0, NULL, 0); } @@ -2788,7 +2424,6 @@ __bfa_cb_ioim_abort(void *cbarg, bfa_boolean_t complete) return; } - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; bfa_cb_ioim_abort(ioim->bfa->bfad, ioim->dio); } @@ -3132,7 +2767,6 @@ bfa_ioim_attach(struct bfa_fcpim_s *fcpim) ioim->bfa = fcpim->bfa; ioim->fcpim = fcpim; ioim->iosp = iosp; - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; INIT_LIST_HEAD(&ioim->sgpg_q); bfa_reqq_winit(&ioim->iosp->reqq_wait, bfa_ioim_qresume, ioim); @@ -3170,7 +2804,6 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m) evt = BFA_IOIM_SM_DONE; else evt = BFA_IOIM_SM_COMP; - ioim->proc_rsp_data(ioim); break; case BFI_IOIM_STS_TIMEDOUT: @@ -3206,7 +2839,6 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m) if (rsp->abort_tag != ioim->abort_tag) { bfa_trc(ioim->bfa, rsp->abort_tag); bfa_trc(ioim->bfa, ioim->abort_tag); - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; return; } @@ -3225,7 +2857,6 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m) WARN_ON(1); } - ioim->proc_rsp_data = bfa_ioim_lm_proc_rsp_data_dummy; bfa_sm_send_event(ioim, evt); } @@ -3244,15 +2875,7 @@ bfa_ioim_good_comp_isr(struct bfa_s *bfa, struct bfi_msg_s *m) bfa_ioim_cb_profile_comp(fcpim, ioim); - if (bfa_get_lun_mask_status(bfa) != BFA_LUNMASK_ENABLED) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD); - return; - } - - if (ioim->proc_rsp_data(ioim) == BFA_TRUE) - bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD); - else - bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP); + bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD); } /* @@ -3364,35 +2987,6 @@ bfa_ioim_free(struct bfa_ioim_s *ioim) void bfa_ioim_start(struct bfa_ioim_s *ioim) { - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)ioim->dio; - struct bfa_lps_s *lps; - enum bfa_ioim_lm_status status; - struct scsi_lun scsilun; - - if (bfa_get_lun_mask_status(ioim->bfa) == BFA_LUNMASK_ENABLED) { - lps = BFA_IOIM_TO_LPS(ioim); - int_to_scsilun(cmnd->device->lun, &scsilun); - status = bfa_ioim_lm_check(ioim, lps, - ioim->itnim->rport, scsilun); - if (status == BFA_IOIM_LM_LUN_NOT_RDY) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_LM_LUN_NOT_RDY); - bfa_stats(ioim->itnim, lm_lun_not_rdy); - return; - } - - if (status == BFA_IOIM_LM_LUN_NOT_SUP) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_LM_LUN_NOT_SUP); - bfa_stats(ioim->itnim, lm_lun_not_sup); - return; - } - - if (status == BFA_IOIM_LM_RPL_DATA_CHANGED) { - bfa_sm_send_event(ioim, BFA_IOIM_SM_LM_RPL_DC); - bfa_stats(ioim->itnim, lm_rpl_data_changed); - return; - } - } - bfa_ioim_cb_profile_start(ioim->fcpim, ioim); /* diff --git a/drivers/scsi/bfa/bfa_fcpim.h b/drivers/scsi/bfa/bfa_fcpim.h index 1080bcb81cb7..36f26da80f76 100644 --- a/drivers/scsi/bfa/bfa_fcpim.h +++ b/drivers/scsi/bfa/bfa_fcpim.h @@ -110,7 +110,6 @@ struct bfad_ioim_s; struct bfad_tskim_s; typedef void (*bfa_fcpim_profile_t) (struct bfa_ioim_s *ioim); -typedef bfa_boolean_t (*bfa_ioim_lm_proc_rsp_data_t) (struct bfa_ioim_s *ioim); struct bfa_fcpim_s { struct bfa_s *bfa; @@ -124,7 +123,6 @@ struct bfa_fcpim_s { u32 path_tov; u16 q_depth; u8 reqq; /* Request queue to be used */ - u8 lun_masking_pending; struct list_head itnim_q; /* queue of active itnim */ struct list_head ioim_resfree_q; /* IOs waiting for f/w */ struct list_head ioim_comp_q; /* IO global comp Q */ @@ -181,7 +179,6 @@ struct bfa_ioim_s { u8 reqq; /* Request queue for I/O */ u8 mode; /* IO is passthrough or not */ u64 start_time; /* IO's Profile start val */ - bfa_ioim_lm_proc_rsp_data_t proc_rsp_data; /* RSP data adjust */ }; struct bfa_ioim_sp_s { @@ -261,10 +258,6 @@ struct bfa_itnim_s { (__ioim)->iotag |= k << BFA_IOIM_RETRY_TAG_OFFSET; \ } while (0) -#define BFA_IOIM_TO_LPS(__ioim) \ - BFA_LPS_FROM_TAG(BFA_LPS_MOD(__ioim->bfa), \ - __ioim->itnim->rport->rport_info.lp_tag) - static inline bfa_boolean_t bfa_ioim_maxretry_reached(struct bfa_ioim_s *ioim) { diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h index 95adb86d3769..b52cbb6bcd5a 100644 --- a/drivers/scsi/bfa/bfa_svc.h +++ b/drivers/scsi/bfa/bfa_svc.h @@ -582,11 +582,6 @@ void bfa_cb_rport_qos_scn_prio(void *rport, #define BFA_LP_TAG_INVALID 0xff void bfa_rport_set_lunmask(struct bfa_s *bfa, struct bfa_rport_s *rp); void bfa_rport_unset_lunmask(struct bfa_s *bfa, struct bfa_rport_s *rp); -bfa_boolean_t bfa_rport_lunmask_active(struct bfa_rport_s *rp); -wwn_t bfa_rport_get_pwwn(struct bfa_s *bfa, struct bfa_rport_s *rp); -struct bfa_rport_s *bfa_rport_get_by_wwn(struct bfa_s *bfa, u16 vf_id, - wwn_t *lpwwn, wwn_t rpwwn); -void *bfa_cb_get_rp_by_wwn(void *arg, u16 vf_id, wwn_t *lpwwn, wwn_t rpwwn); /* * bfa fcxp API functions diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 66fb72531b34..404fd10ddb21 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -674,6 +674,7 @@ bfad_vport_create(struct bfad_s *bfad, u16 vf_id, spin_lock_irqsave(&bfad->bfad_lock, flags); bfa_fcs_vport_start(&vport->fcs_vport); + list_add_tail(&vport->list_entry, &bfad->vport_list); spin_unlock_irqrestore(&bfad->bfad_lock, flags); return BFA_STATUS_OK; @@ -1404,6 +1405,7 @@ bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid) bfad->ref_count = 0; bfad->pport.bfad = bfad; INIT_LIST_HEAD(&bfad->pbc_vport_list); + INIT_LIST_HEAD(&bfad->vport_list); /* Setup the debugfs node for this bfad */ if (bfa_debugfs_enable) diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c index 9d95844ab463..1938fe0473e9 100644 --- a/drivers/scsi/bfa/bfad_attr.c +++ b/drivers/scsi/bfa/bfad_attr.c @@ -491,7 +491,7 @@ bfad_im_vport_delete(struct fc_vport *fc_vport) free_scsi_host: bfad_scsi_host_free(bfad, im_port); - + list_del(&vport->list_entry); kfree(vport); return 0; diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 06fc00caeb41..530de2b1200a 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -2394,6 +2394,21 @@ out: return 0; } +/* Function to reset the LUN SCAN mode */ +static void +bfad_iocmd_lunmask_reset_lunscan_mode(struct bfad_s *bfad, int lunmask_cfg) +{ + struct bfad_im_port_s *pport_im = bfad->pport.im_port; + struct bfad_vport_s *vport = NULL; + + /* Set the scsi device LUN SCAN flags for base port */ + bfad_reset_sdev_bflags(pport_im, lunmask_cfg); + + /* Set the scsi device LUN SCAN flags for the vports */ + list_for_each_entry(vport, &bfad->vport_list, list_entry) + bfad_reset_sdev_bflags(vport->drv_port.im_port, lunmask_cfg); +} + int bfad_iocmd_lunmask(struct bfad_s *bfad, void *pcmd, unsigned int v_cmd) { @@ -2401,11 +2416,17 @@ bfad_iocmd_lunmask(struct bfad_s *bfad, void *pcmd, unsigned int v_cmd) unsigned long flags; spin_lock_irqsave(&bfad->bfad_lock, flags); - if (v_cmd == IOCMD_FCPIM_LUNMASK_ENABLE) + if (v_cmd == IOCMD_FCPIM_LUNMASK_ENABLE) { iocmd->status = bfa_fcpim_lunmask_update(&bfad->bfa, BFA_TRUE); - else if (v_cmd == IOCMD_FCPIM_LUNMASK_DISABLE) + /* Set the LUN Scanning mode to be Sequential scan */ + if (iocmd->status == BFA_STATUS_OK) + bfad_iocmd_lunmask_reset_lunscan_mode(bfad, BFA_TRUE); + } else if (v_cmd == IOCMD_FCPIM_LUNMASK_DISABLE) { iocmd->status = bfa_fcpim_lunmask_update(&bfad->bfa, BFA_FALSE); - else if (v_cmd == IOCMD_FCPIM_LUNMASK_CLEAR) + /* Set the LUN Scanning mode to default REPORT_LUNS scan */ + if (iocmd->status == BFA_STATUS_OK) + bfad_iocmd_lunmask_reset_lunscan_mode(bfad, BFA_FALSE); + } else if (v_cmd == IOCMD_FCPIM_LUNMASK_CLEAR) iocmd->status = bfa_fcpim_lunmask_clear(&bfad->bfa); spin_unlock_irqrestore(&bfad->bfad_lock, flags); return 0; diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index 5e19a5f820ec..dc5b9d99c450 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -43,6 +43,7 @@ #include <scsi/scsi_transport_fc.h> #include <scsi/scsi_transport.h> #include <scsi/scsi_bsg_fc.h> +#include <scsi/scsi_devinfo.h> #include "bfa_modules.h" #include "bfa_fcs.h" @@ -227,6 +228,7 @@ struct bfad_s { struct list_head active_aen_q; struct bfa_aen_entry_s aen_list[BFA_AEN_MAX_ENTRY]; spinlock_t bfad_aen_spinlock; + struct list_head vport_list; }; /* BFAD state machine events */ diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index e5db649e8eb7..3153923f5b60 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -918,16 +918,70 @@ bfad_get_itnim(struct bfad_im_port_s *im_port, int id) } /* + * Function is invoked from the SCSI Host Template slave_alloc() entry point. + * Has the logic to query the LUN Mask database to check if this LUN needs to + * be made visible to the SCSI mid-layer or not. + * + * Returns BFA_STATUS_OK if this LUN needs to be added to the OS stack. + * Returns -ENXIO to notify SCSI mid-layer to not add this LUN to the OS stack. + */ +static int +bfad_im_check_if_make_lun_visible(struct scsi_device *sdev, + struct fc_rport *rport) +{ + struct bfad_itnim_data_s *itnim_data = + (struct bfad_itnim_data_s *) rport->dd_data; + struct bfa_s *bfa = itnim_data->itnim->bfa_itnim->bfa; + struct bfa_rport_s *bfa_rport = itnim_data->itnim->bfa_itnim->rport; + struct bfa_lun_mask_s *lun_list = bfa_get_lun_mask_list(bfa); + int i = 0, ret = -ENXIO; + + for (i = 0; i < MAX_LUN_MASK_CFG; i++) { + if (lun_list[i].state == BFA_IOIM_LUN_MASK_ACTIVE && + scsilun_to_int(&lun_list[i].lun) == sdev->lun && + lun_list[i].rp_tag == bfa_rport->rport_tag && + lun_list[i].lp_tag == (u8)bfa_rport->rport_info.lp_tag) { + ret = BFA_STATUS_OK; + break; + } + } + return ret; +} + +/* * Scsi_Host template entry slave_alloc */ static int bfad_im_slave_alloc(struct scsi_device *sdev) { struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); + struct bfad_itnim_data_s *itnim_data = + (struct bfad_itnim_data_s *) rport->dd_data; + struct bfa_s *bfa = itnim_data->itnim->bfa_itnim->bfa; if (!rport || fc_remote_port_chkready(rport)) return -ENXIO; + if (bfa_get_lun_mask_status(bfa) == BFA_LUNMASK_ENABLED) { + /* + * We should not mask LUN 0 - since this will translate + * to no LUN / TARGET for SCSI ml resulting no scan. + */ + if (sdev->lun == 0) { + sdev->sdev_bflags |= BLIST_NOREPORTLUN | + BLIST_SPARSELUN; + goto done; + } + + /* + * Query LUN Mask configuration - to expose this LUN + * to the SCSI mid-layer or to mask it. + */ + if (bfad_im_check_if_make_lun_visible(sdev, rport) != + BFA_STATUS_OK) + return -ENXIO; + } +done: sdev->hostdata = rport->dd_data; return 0; @@ -1037,6 +1091,8 @@ bfad_im_fc_rport_add(struct bfad_im_port_s *im_port, struct bfad_itnim_s *itnim) && (fc_rport->scsi_target_id < MAX_FCP_TARGET)) itnim->scsi_tgt_id = fc_rport->scsi_target_id; + itnim->channel = fc_rport->channel; + return; } diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h index 004b6cf848d9..0814367ef101 100644 --- a/drivers/scsi/bfa/bfad_im.h +++ b/drivers/scsi/bfa/bfad_im.h @@ -91,6 +91,7 @@ struct bfad_itnim_s { struct fc_rport *fc_rport; struct bfa_itnim_s *bfa_itnim; u16 scsi_tgt_id; + u16 channel; u16 queue_work; unsigned long last_ramp_up_time; unsigned long last_queue_full_time; @@ -166,4 +167,30 @@ irqreturn_t bfad_intx(int irq, void *dev_id); int bfad_im_bsg_request(struct fc_bsg_job *job); int bfad_im_bsg_timeout(struct fc_bsg_job *job); +/* + * Macro to set the SCSI device sdev_bflags - sdev_bflags are used by the + * SCSI mid-layer to choose LUN Scanning mode REPORT_LUNS vs. Sequential Scan + * + * Internally iterate's over all the ITNIM's part of the im_port & set's the + * sdev_bflags for the scsi_device associated with LUN #0. + */ +#define bfad_reset_sdev_bflags(__im_port, __lunmask_cfg) do { \ + struct scsi_device *__sdev = NULL; \ + struct bfad_itnim_s *__itnim = NULL; \ + u32 scan_flags = BLIST_NOREPORTLUN | BLIST_SPARSELUN; \ + list_for_each_entry(__itnim, &((__im_port)->itnim_mapped_list), \ + list_entry) { \ + __sdev = scsi_device_lookup((__im_port)->shost, \ + __itnim->channel, \ + __itnim->scsi_tgt_id, 0); \ + if (__sdev) { \ + if ((__lunmask_cfg) == BFA_TRUE) \ + __sdev->sdev_bflags |= scan_flags; \ + else \ + __sdev->sdev_bflags &= ~scan_flags; \ + scsi_device_put(__sdev); \ + } \ + } \ +} while (0) + #endif diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index c5360ffb4bed..d3ff9cd40234 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -1868,8 +1868,9 @@ int cxgbi_conn_alloc_pdu(struct iscsi_task *task, u8 opcode) tdata->skb = alloc_skb(cdev->skb_tx_rsvd + headroom, GFP_ATOMIC); if (!tdata->skb) { - pr_warn("alloc skb %u+%u, opcode 0x%x failed.\n", - cdev->skb_tx_rsvd, headroom, opcode); + struct cxgbi_sock *csk = cconn->cep->csk; + struct net_device *ndev = cdev->ports[csk->port_id]; + ndev->stats.tx_dropped++; return -ENOMEM; } diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 4ef021291a4d..04c5cea47a22 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -466,6 +466,11 @@ static int alua_check_sense(struct scsi_device *sdev, * Power On, Reset, or Bus Device Reset, just retry. */ return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x01) + /* + * Mode Parameters Changed + */ + return ADD_TO_MLQUEUE; if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) /* * ALUA state changed diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 841ebf4a6788..53a31c753cb1 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -953,6 +953,8 @@ static int __init rdac_init(void) if (!kmpath_rdacd) { scsi_unregister_device_handler(&rdac_dh); printk(KERN_ERR "kmpath_rdacd creation failed.\n"); + + r = -EINVAL; } done: return r; diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 8d67467dd9ce..e9599600aa23 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -58,7 +58,11 @@ module_param_named(ddp_min, fcoe_ddp_min, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ddp_min, "Minimum I/O size in bytes for " \ "Direct Data Placement (DDP)."); -DEFINE_MUTEX(fcoe_config_mutex); +unsigned int fcoe_debug_logging; +module_param_named(debug_logging, fcoe_debug_logging, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels"); + +static DEFINE_MUTEX(fcoe_config_mutex); static struct workqueue_struct *fcoe_wq; @@ -67,8 +71,8 @@ static DECLARE_COMPLETION(fcoe_flush_completion); /* fcoe host list */ /* must only by accessed under the RTNL mutex */ -LIST_HEAD(fcoe_hostlist); -DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu); +static LIST_HEAD(fcoe_hostlist); +static DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu); /* Function Prototypes */ static int fcoe_reset(struct Scsi_Host *); @@ -157,7 +161,7 @@ static struct libfc_function_template fcoe_libfc_fcn_templ = { .lport_set_port_id = fcoe_set_port_id, }; -struct fc_function_template fcoe_nport_fc_functions = { +static struct fc_function_template fcoe_nport_fc_functions = { .show_host_node_name = 1, .show_host_port_name = 1, .show_host_supported_classes = 1, @@ -197,7 +201,7 @@ struct fc_function_template fcoe_nport_fc_functions = { .bsg_request = fc_lport_bsg_request, }; -struct fc_function_template fcoe_vport_fc_functions = { +static struct fc_function_template fcoe_vport_fc_functions = { .show_host_node_name = 1, .show_host_port_name = 1, .show_host_supported_classes = 1, @@ -433,7 +437,7 @@ static inline void fcoe_interface_put(struct fcoe_interface *fcoe) * * Caller must be holding the RTNL mutex */ -void fcoe_interface_cleanup(struct fcoe_interface *fcoe) +static void fcoe_interface_cleanup(struct fcoe_interface *fcoe) { struct net_device *netdev = fcoe->netdev; struct fcoe_ctlr *fip = &fcoe->ctlr; @@ -748,7 +752,7 @@ static int fcoe_shost_config(struct fc_lport *lport, struct device *dev) * * Returns: True for read types I/O, otherwise returns false. */ -bool fcoe_oem_match(struct fc_frame *fp) +static bool fcoe_oem_match(struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); struct fcp_cmnd *fcp; @@ -756,11 +760,12 @@ bool fcoe_oem_match(struct fc_frame *fp) if (fc_fcp_is_read(fr_fsp(fp)) && (fr_fsp(fp)->data_len > fcoe_ddp_min)) return true; - else if (!(ntoh24(fh->fh_f_ctl) & FC_FC_EX_CTX)) { + else if ((fr_fsp(fp) == NULL) && + (fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) && + (ntohs(fh->fh_rx_id) == FC_XID_UNKNOWN)) { fcp = fc_frame_payload_get(fp, sizeof(*fcp)); - if (ntohs(fh->fh_rx_id) == FC_XID_UNKNOWN && - fcp && (ntohl(fcp->fc_dl) > fcoe_ddp_min) && - (fcp->fc_flags & FCP_CFL_WRDATA)) + if ((fcp->fc_flags & FCP_CFL_WRDATA) && + (ntohl(fcp->fc_dl) > fcoe_ddp_min)) return true; } return false; @@ -1106,7 +1111,7 @@ static int __init fcoe_if_init(void) * * Returns: 0 on success */ -int __exit fcoe_if_exit(void) +static int __exit fcoe_if_exit(void) { fc_release_transport(fcoe_nport_scsi_transport); fc_release_transport(fcoe_vport_scsi_transport); @@ -1295,7 +1300,7 @@ static inline unsigned int fcoe_select_cpu(void) * * Returns: 0 for success */ -int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, +static int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, struct packet_type *ptype, struct net_device *olddev) { struct fc_lport *lport; @@ -1451,7 +1456,7 @@ static int fcoe_alloc_paged_crc_eof(struct sk_buff *skb, int tlen) * * Return: 0 for success */ -int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) +static int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) { int wlen; u32 crc; @@ -1671,8 +1676,7 @@ static void fcoe_recv_frame(struct sk_buff *skb) skb->dev ? skb->dev->name : "<NULL>"); port = lport_priv(lport); - if (skb_is_nonlinear(skb)) - skb_linearize(skb); /* not ideal */ + skb_linearize(skb); /* check for skb_is_nonlinear is within skb_linearize */ /* * Frame length checks and setting up the header pointers @@ -1728,7 +1732,7 @@ drop: * * Return: 0 for success */ -int fcoe_percpu_receive_thread(void *arg) +static int fcoe_percpu_receive_thread(void *arg) { struct fcoe_percpu_s *p = arg; struct sk_buff *skb; @@ -2146,7 +2150,7 @@ out_nortnl: * Returns: 0 if the ethtool query was successful * -1 if the ethtool query failed */ -int fcoe_link_speed_update(struct fc_lport *lport) +static int fcoe_link_speed_update(struct fc_lport *lport) { struct net_device *netdev = fcoe_netdev(lport); struct ethtool_cmd ecmd; @@ -2180,7 +2184,7 @@ int fcoe_link_speed_update(struct fc_lport *lport) * Returns: 0 if link is UP and OK, -1 if not * */ -int fcoe_link_ok(struct fc_lport *lport) +static int fcoe_link_ok(struct fc_lport *lport) { struct net_device *netdev = fcoe_netdev(lport); @@ -2200,7 +2204,7 @@ int fcoe_link_ok(struct fc_lport *lport) * there no packets that will be handled by the lport, but also that any * threads already handling packet have returned. */ -void fcoe_percpu_clean(struct fc_lport *lport) +static void fcoe_percpu_clean(struct fc_lport *lport) { struct fcoe_percpu_s *pp; struct fcoe_rcv_info *fr; @@ -2251,7 +2255,7 @@ void fcoe_percpu_clean(struct fc_lport *lport) * * Returns: Always 0 (return value required by FC transport template) */ -int fcoe_reset(struct Scsi_Host *shost) +static int fcoe_reset(struct Scsi_Host *shost) { struct fc_lport *lport = shost_priv(shost); struct fcoe_port *port = lport_priv(lport); diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h index 6c6884bcf840..bcc89e639495 100644 --- a/drivers/scsi/fcoe/fcoe.h +++ b/drivers/scsi/fcoe/fcoe.h @@ -40,9 +40,7 @@ #define FCOE_MIN_XID 0x0000 /* the min xid supported by fcoe_sw */ #define FCOE_MAX_XID 0x0FFF /* the max xid supported by fcoe_sw */ -unsigned int fcoe_debug_logging; -module_param_named(debug_logging, fcoe_debug_logging, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels"); +extern unsigned int fcoe_debug_logging; #define FCOE_LOGGING 0x01 /* General logging, not categorized */ #define FCOE_NETDEV_LOGGING 0x02 /* Netdevice logging */ diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 5140f5d0fd6b..b96962c39449 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -4271,7 +4271,9 @@ static void stop_controller_lockup_detector(struct ctlr_info *h) remove_ctlr_from_lockup_detector_list(h); /* If the list of ctlr's to monitor is empty, stop the thread */ if (list_empty(&hpsa_ctlr_list)) { + spin_unlock_irqrestore(&lockup_detector_lock, flags); kthread_stop(hpsa_lockup_detector); + spin_lock_irqsave(&lockup_detector_lock, flags); hpsa_lockup_detector = NULL; } spin_unlock_irqrestore(&lockup_detector_lock, flags); diff --git a/drivers/scsi/isci/firmware/Makefile b/drivers/scsi/isci/firmware/Makefile deleted file mode 100644 index 5f54461cabc5..000000000000 --- a/drivers/scsi/isci/firmware/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# Makefile for create_fw -# -CC=gcc -CFLAGS=-c -Wall -O2 -g -LDFLAGS= -SOURCES=create_fw.c -OBJECTS=$(SOURCES:.cpp=.o) -EXECUTABLE=create_fw - -all: $(SOURCES) $(EXECUTABLE) - -$(EXECUTABLE): $(OBJECTS) - $(CC) $(LDFLAGS) $(OBJECTS) -o $@ - -.c.o: - $(CC) $(CFLAGS) $< -O $@ - -clean: - rm -f *.o $(EXECUTABLE) diff --git a/drivers/scsi/isci/firmware/README b/drivers/scsi/isci/firmware/README deleted file mode 100644 index 8056d2bd233b..000000000000 --- a/drivers/scsi/isci/firmware/README +++ /dev/null @@ -1,36 +0,0 @@ -This defines the temporary binary blow we are to pass to the SCU -driver to emulate the binary firmware that we will eventually be -able to access via NVRAM on the SCU controller. - -The current size of the binary blob is expected to be 149 bytes or larger - -Header Types: -0x1: Phy Masks -0x2: Phy Gens -0x3: SAS Addrs -0xff: End of Data - -ID string - u8[12]: "#SCU MAGIC#\0" -Version - u8: 1 -SubVersion - u8: 0 - -Header Type - u8: 0x1 -Size - u8: 8 -Phy Mask - u32[8] - -Header Type - u8: 0x2 -Size - u8: 8 -Phy Gen - u32[8] - -Header Type - u8: 0x3 -Size - u8: 8 -Sas Addr - u64[8] - -Header Type - u8: 0xf - - -============================================================================== - -Place isci_firmware.bin in /lib/firmware -Be sure to recreate the initramfs image to include the firmware. - diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c deleted file mode 100644 index c7a2887a7e95..000000000000 --- a/drivers/scsi/isci/firmware/create_fw.c +++ /dev/null @@ -1,99 +0,0 @@ -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <string.h> -#include <errno.h> -#include <asm/types.h> -#include <strings.h> -#include <stdint.h> - -#include "create_fw.h" -#include "../probe_roms.h" - -int write_blob(struct isci_orom *isci_orom) -{ - FILE *fd; - int err; - size_t count; - - fd = fopen(blob_name, "w+"); - if (!fd) { - perror("Open file for write failed"); - fclose(fd); - return -EIO; - } - - count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd); - if (count != 1) { - perror("Write data failed"); - fclose(fd); - return -EIO; - } - - fclose(fd); - - return 0; -} - -void set_binary_values(struct isci_orom *isci_orom) -{ - int ctrl_idx, phy_idx, port_idx; - - /* setting OROM signature */ - strncpy(isci_orom->hdr.signature, sig, strlen(sig)); - isci_orom->hdr.version = version; - isci_orom->hdr.total_block_length = sizeof(struct isci_orom); - isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr); - isci_orom->hdr.num_elements = num_elements; - - for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) { - isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type; - isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up = - max_num_concurrent_dev_spin_up; - isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc = - enable_ssc; - - for (port_idx = 0; port_idx < 4; port_idx++) - isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask = - phy_mask[ctrl_idx][port_idx]; - - for (phy_idx = 0; phy_idx < 4; phy_idx++) { - isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high = - (__u32)(sas_addr[ctrl_idx][phy_idx] >> 32); - isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low = - (__u32)(sas_addr[ctrl_idx][phy_idx]); - - isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 = - afe_tx_amp_control0; - isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 = - afe_tx_amp_control1; - isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 = - afe_tx_amp_control2; - isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 = - afe_tx_amp_control3; - } - } -} - -int main(void) -{ - int err; - struct isci_orom *isci_orom; - - isci_orom = malloc(sizeof(struct isci_orom)); - memset(isci_orom, 0, sizeof(struct isci_orom)); - - set_binary_values(isci_orom); - - err = write_blob(isci_orom); - if (err < 0) { - free(isci_orom); - return err; - } - - free(isci_orom); - return 0; -} diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h deleted file mode 100644 index 5f298828d22e..000000000000 --- a/drivers/scsi/isci/firmware/create_fw.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _CREATE_FW_H_ -#define _CREATE_FW_H_ -#include "../probe_roms.h" - - -/* we are configuring for 2 SCUs */ -static const int num_elements = 2; - -/* - * For all defined arrays: - * elements 0-3 are for SCU0, ports 0-3 - * elements 4-7 are for SCU1, ports 0-3 - * - * valid configurations for one SCU are: - * P0 P1 P2 P3 - * ---------------- - * 0xF,0x0,0x0,0x0 # 1 x4 port - * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1 - * # ports - * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2 - * # port - * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port - * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration) - * - * if there is a port/phy on which you do not wish to override the default - * values, use the value assigned to UNINIT_PARAM (255). - */ - -/* discovery mode type (port auto config mode by default ) */ - -/* - * if there is a port/phy on which you do not wish to override the default - * values, use the value "0000000000000000". SAS address of zero's is - * considered invalid and will not be used. - */ -#ifdef MPC -static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE; -static const __u8 phy_mask[2][4] = { {1, 2, 4, 8}, - {1, 2, 4, 8} }; -static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL, - 0x5FCFFFFFF0000002ULL, - 0x5FCFFFFFF0000003ULL, - 0x5FCFFFFFF0000004ULL }, - { 0x5FCFFFFFF0000005ULL, - 0x5FCFFFFFF0000006ULL, - 0x5FCFFFFFF0000007ULL, - 0x5FCFFFFFF0000008ULL } }; -#else /* APC (default) */ -static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; -static const __u8 phy_mask[2][4]; -static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL, - 0x5FCFFFFF00000001ULL, - 0x5FCFFFFF00000001ULL, - 0x5FCFFFFF00000001ULL }, - { 0x5FCFFFFF00000002ULL, - 0x5FCFFFFF00000002ULL, - 0x5FCFFFFF00000002ULL, - 0x5FCFFFFF00000002ULL } }; -#endif - -/* Maximum number of concurrent device spin up */ -static const int max_num_concurrent_dev_spin_up = 1; - -/* enable of ssc operation */ -static const int enable_ssc; - -/* AFE_TX_AMP_CONTROL */ -static const unsigned int afe_tx_amp_control0 = 0x000bdd08; -static const unsigned int afe_tx_amp_control1 = 0x000ffc00; -static const unsigned int afe_tx_amp_control2 = 0x000b7c09; -static const unsigned int afe_tx_amp_control3 = 0x000afc6e; - -static const char blob_name[] = "isci_firmware.bin"; -static const char sig[] = "ISCUOEMB"; -static const unsigned char version = 0x10; - -#endif diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index e7fe9c4c85b8..1a65d6514237 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -899,7 +899,8 @@ static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost) */ if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) || (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) || - (iphy->is_in_link_training == true && is_phy_starting(iphy))) { + (iphy->is_in_link_training == true && is_phy_starting(iphy)) || + (ihost->port_agent.phy_ready_mask != ihost->port_agent.phy_configured_mask)) { is_controller_start_complete = false; break; } @@ -1666,6 +1667,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost /* Default to no SSC operation. */ ihost->oem_parameters.controller.do_enable_ssc = false; + /* Default to short cables on all phys. */ + ihost->oem_parameters.controller.cable_selection_mask = 0; + /* Initialize all of the port parameter information to narrow ports. */ for (index = 0; index < SCI_MAX_PORTS; index++) { ihost->oem_parameters.ports[index].phy_mask = 0; @@ -1673,8 +1677,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost /* Initialize all of the phy parameter information. */ for (index = 0; index < SCI_MAX_PHYS; index++) { - /* Default to 6G (i.e. Gen 3) for now. */ - ihost->user_parameters.phys[index].max_speed_generation = 3; + /* Default to 3G (i.e. Gen 2). */ + ihost->user_parameters.phys[index].max_speed_generation = + SCIC_SDS_PARM_GEN2_SPEED; /* the frequencies cannot be 0 */ ihost->user_parameters.phys[index].align_insertion_frequency = 0x7f; @@ -1694,7 +1699,7 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost ihost->user_parameters.ssp_inactivity_timeout = 5; ihost->user_parameters.stp_max_occupancy_timeout = 5; ihost->user_parameters.ssp_max_occupancy_timeout = 20; - ihost->user_parameters.no_outbound_task_timeout = 20; + ihost->user_parameters.no_outbound_task_timeout = 2; } static void controller_timeout(unsigned long data) @@ -1759,7 +1764,7 @@ static enum sci_status sci_controller_construct(struct isci_host *ihost, return sci_controller_reset(ihost); } -int sci_oem_parameters_validate(struct sci_oem_params *oem) +int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version) { int i; @@ -1791,18 +1796,61 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem) oem->controller.max_concurr_spin_up < 1) return -EINVAL; + if (oem->controller.do_enable_ssc) { + if (version < ISCI_ROM_VER_1_1 && oem->controller.do_enable_ssc != 1) + return -EINVAL; + + if (version >= ISCI_ROM_VER_1_1) { + u8 test = oem->controller.ssc_sata_tx_spread_level; + + switch (test) { + case 0: + case 2: + case 3: + case 6: + case 7: + break; + default: + return -EINVAL; + } + + test = oem->controller.ssc_sas_tx_spread_level; + if (oem->controller.ssc_sas_tx_type == 0) { + switch (test) { + case 0: + case 2: + case 3: + break; + default: + return -EINVAL; + } + } else if (oem->controller.ssc_sas_tx_type == 1) { + switch (test) { + case 0: + case 3: + case 6: + break; + default: + return -EINVAL; + } + } + } + } + return 0; } static enum sci_status sci_oem_parameters_set(struct isci_host *ihost) { u32 state = ihost->sm.current_state_id; + struct isci_pci_info *pci_info = to_pci_info(ihost->pdev); if (state == SCIC_RESET || state == SCIC_INITIALIZING || state == SCIC_INITIALIZED) { - if (sci_oem_parameters_validate(&ihost->oem_parameters)) + if (sci_oem_parameters_validate(&ihost->oem_parameters, + pci_info->orom->hdr.version)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; return SCI_SUCCESS; @@ -1857,6 +1905,31 @@ static void power_control_timeout(unsigned long data) ihost->power_control.phys_waiting--; ihost->power_control.phys_granted_power++; sci_phy_consume_power_handler(iphy); + + if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + u8 j; + + for (j = 0; j < SCI_MAX_PHYS; j++) { + struct isci_phy *requester = ihost->power_control.requesters[j]; + + /* + * Search the power_control queue to see if there are other phys + * attached to the same remote device. If found, take all of + * them out of await_sas_power state. + */ + if (requester != NULL && requester != iphy) { + u8 other = memcmp(requester->frame_rcvd.iaf.sas_addr, + iphy->frame_rcvd.iaf.sas_addr, + sizeof(requester->frame_rcvd.iaf.sas_addr)); + + if (other == 0) { + ihost->power_control.requesters[j] = NULL; + ihost->power_control.phys_waiting--; + sci_phy_consume_power_handler(requester); + } + } + } + } } /* @@ -1891,9 +1964,34 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost, ihost->power_control.timer_started = true; } else { - /* Add the phy in the waiting list */ - ihost->power_control.requesters[iphy->phy_index] = iphy; - ihost->power_control.phys_waiting++; + /* + * There are phys, attached to the same sas address as this phy, are + * already in READY state, this phy don't need wait. + */ + u8 i; + struct isci_phy *current_phy; + + for (i = 0; i < SCI_MAX_PHYS; i++) { + u8 other; + current_phy = &ihost->phys[i]; + + other = memcmp(current_phy->frame_rcvd.iaf.sas_addr, + iphy->frame_rcvd.iaf.sas_addr, + sizeof(current_phy->frame_rcvd.iaf.sas_addr)); + + if (current_phy->sm.current_state_id == SCI_PHY_READY && + current_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS && + other == 0) { + sci_phy_consume_power_handler(iphy); + break; + } + } + + if (i == SCI_MAX_PHYS) { + /* Add the phy in the waiting list */ + ihost->power_control.requesters[iphy->phy_index] = iphy; + ihost->power_control.phys_waiting++; + } } } @@ -1908,162 +2006,250 @@ void sci_controller_power_control_queue_remove(struct isci_host *ihost, ihost->power_control.requesters[iphy->phy_index] = NULL; } +static int is_long_cable(int phy, unsigned char selection_byte) +{ + return !!(selection_byte & (1 << phy)); +} + +static int is_medium_cable(int phy, unsigned char selection_byte) +{ + return !!(selection_byte & (1 << (phy + 4))); +} + +static enum cable_selections decode_selection_byte( + int phy, + unsigned char selection_byte) +{ + return ((selection_byte & (1 << phy)) ? 1 : 0) + + (selection_byte & (1 << (phy + 4)) ? 2 : 0); +} + +static unsigned char *to_cable_select(struct isci_host *ihost) +{ + if (is_cable_select_overridden()) + return ((unsigned char *)&cable_selection_override) + + ihost->id; + else + return &ihost->oem_parameters.controller.cable_selection_mask; +} + +enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy) +{ + return decode_selection_byte(phy, *to_cable_select(ihost)); +} + +char *lookup_cable_names(enum cable_selections selection) +{ + static char *cable_names[] = { + [short_cable] = "short", + [long_cable] = "long", + [medium_cable] = "medium", + [undefined_cable] = "<undefined, assumed long>" /* bit 0==1 */ + }; + return (selection <= undefined_cable) ? cable_names[selection] + : cable_names[undefined_cable]; +} + #define AFE_REGISTER_WRITE_DELAY 10 -/* Initialize the AFE for this phy index. We need to read the AFE setup from - * the OEM parameters - */ static void sci_controller_afe_initialization(struct isci_host *ihost) { + struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe; const struct sci_oem_params *oem = &ihost->oem_parameters; struct pci_dev *pdev = ihost->pdev; u32 afe_status; u32 phy_id; + unsigned char cable_selection_mask = *to_cable_select(ihost); /* Clear DFX Status registers */ - writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0); + writel(0x0081000f, &afe->afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); - if (is_b0(pdev)) { + if (is_b0(pdev) || is_c0(pdev) || is_c1(pdev)) { /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement - * Timer, PM Stagger Timer */ - writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2); + * Timer, PM Stagger Timer + */ + writel(0x0007FFFF, &afe->afe_pmsn_master_control2); udelay(AFE_REGISTER_WRITE_DELAY); } /* Configure bias currents to normal */ if (is_a2(pdev)) - writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control); + writel(0x00005A00, &afe->afe_bias_control); else if (is_b0(pdev) || is_c0(pdev)) - writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control); + writel(0x00005F00, &afe->afe_bias_control); + else if (is_c1(pdev)) + writel(0x00005500, &afe->afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ - if (is_b0(pdev) || is_c0(pdev)) - writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0); - else - writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0); + if (is_a2(pdev)) + writel(0x80040908, &afe->afe_pll_control0); + else if (is_b0(pdev) || is_c0(pdev)) + writel(0x80040A08, &afe->afe_pll_control0); + else if (is_c1(pdev)) { + writel(0x80000B08, &afe->afe_pll_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + writel(0x00000B08, &afe->afe_pll_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + writel(0x80000B08, &afe->afe_pll_control0); + } udelay(AFE_REGISTER_WRITE_DELAY); /* Wait for the PLL to lock */ do { - afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status); + afe_status = readl(&afe->afe_common_block_status); udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); if (is_a2(pdev)) { - /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ - writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0); + /* Shorten SAS SNW lock time (RxLock timer value from 76 + * us to 50 us) + */ + writel(0x7bcc96ad, &afe->afe_pmsn_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_id]; const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; + int cable_length_long = + is_long_cable(phy_id, cable_selection_mask); + int cable_length_medium = + is_medium_cable(phy_id, cable_selection_mask); - if (is_b0(pdev)) { - /* Configure transmitter SSC parameters */ - writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + if (is_a2(pdev)) { + /* All defaults, except the Receive Word + * Alignament/Comma Detect Enable....(0xe800) + */ + writel(0x00004512, &xcvr->afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x0050100F, &xcvr->afe_xcvr_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + } else if (is_b0(pdev)) { + /* Configure transmitter SSC parameters */ + writel(0x00030000, &xcvr->afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); } else if (is_c0(pdev)) { - /* Configure transmitter SSC parameters */ - writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + /* Configure transmitter SSC parameters */ + writel(0x00010202, &xcvr->afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); - /* - * All defaults, except the Receive Word Alignament/Comma Detect - * Enable....(0xe800) */ - writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + /* All defaults, except the Receive Word + * Alignament/Comma Detect Enable....(0xe800) + */ + writel(0x00014500, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); - } else { - /* - * All defaults, except the Receive Word Alignament/Comma Detect - * Enable....(0xe800) */ - writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + } else if (is_c1(pdev)) { + /* Configure transmitter SSC parameters */ + writel(0x00010202, &xcvr->afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); - writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); + /* All defaults, except the Receive Word + * Alignament/Comma Detect Enable....(0xe800) + */ + writel(0x0001C500, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); } - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ + /* Power up TX and RX out from power down (PWRDNTX and + * PWRDNRX) & increase TX int & ext bias 20%....(0xe85c) + */ if (is_a2(pdev)) - writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003F0, &xcvr->afe_channel_control); else if (is_b0(pdev)) { - /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D7, &xcvr->afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - } else { - writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D4, &xcvr->afe_channel_control); + } else if (is_c0(pdev)) { + writel(0x000001E7, &xcvr->afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000001E4, &xcvr->afe_channel_control); + } else if (is_c1(pdev)) { + writel(cable_length_long ? 0x000002F7 : 0x000001F7, + &xcvr->afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(cable_length_long ? 0x000002F4 : 0x000001F4, + &xcvr->afe_channel_control); } udelay(AFE_REGISTER_WRITE_DELAY); if (is_a2(pdev)) { /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &xcvr->afe_tx_control); udelay(AFE_REGISTER_WRITE_DELAY); } - /* - * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), - * RDD=0x0(RX Detect Enabled) ....(0xe800) */ - writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + if (is_a2(pdev) || is_b0(pdev)) + /* RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, + * TPD=0x0(TX Power On), RDD=0x0(RX Detect + * Enabled) ....(0xe800) + */ + writel(0x00004100, &xcvr->afe_xcvr_control0); + else if (is_c0(pdev)) + writel(0x00014100, &xcvr->afe_xcvr_control0); + else if (is_c1(pdev)) + writel(0x0001C100, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Leave DFE/FFE on */ if (is_a2(pdev)) - writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F11103F, &xcvr->afe_rx_ssc_control0); else if (is_b0(pdev)) { - writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F11103F, &xcvr->afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); - } else { - writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1); + writel(0x00040000, &xcvr->afe_tx_control); + } else if (is_c0(pdev)) { + writel(0x01400C0F, &xcvr->afe_rx_ssc_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x3F6F103F, &xcvr->afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &xcvr->afe_tx_control); + } else if (is_c1(pdev)) { + writel(cable_length_long ? 0x01500C0C : + cable_length_medium ? 0x01400C0D : 0x02400C0D, + &xcvr->afe_xcvr_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x000003E0, &xcvr->afe_dfx_rx_control1); udelay(AFE_REGISTER_WRITE_DELAY); - writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(cable_length_long ? 0x33091C1F : + cable_length_medium ? 0x3315181F : 0x2B17161F, + &xcvr->afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &xcvr->afe_tx_control); } udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control0, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); + writel(oem_phy->afe_tx_amp_control0, &xcvr->afe_tx_amp_control0); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control1, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); + writel(oem_phy->afe_tx_amp_control1, &xcvr->afe_tx_amp_control1); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control2, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); + writel(oem_phy->afe_tx_amp_control2, &xcvr->afe_tx_amp_control2); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control3, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); + writel(oem_phy->afe_tx_amp_control3, &xcvr->afe_tx_amp_control3); udelay(AFE_REGISTER_WRITE_DELAY); } /* Transfer control to the PEs */ - writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0); + writel(0x00010f00, &afe->afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 646051afd3cb..5477f0fa8233 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -435,11 +435,36 @@ static inline bool is_b0(struct pci_dev *pdev) static inline bool is_c0(struct pci_dev *pdev) { - if (pdev->revision >= 5) + if (pdev->revision == 5) return true; return false; } +static inline bool is_c1(struct pci_dev *pdev) +{ + if (pdev->revision >= 6) + return true; + return false; +} + +enum cable_selections { + short_cable = 0, + long_cable = 1, + medium_cable = 2, + undefined_cable = 3 +}; + +#define CABLE_OVERRIDE_DISABLED (0x10000) + +static inline int is_cable_select_overridden(void) +{ + return cable_selection_override < CABLE_OVERRIDE_DISABLED; +} + +enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy); +void validate_cable_selections(struct isci_host *ihost); +char *lookup_cable_names(enum cable_selections); + /* set hw control for 'activity', even though active enclosures seem to drive * the activity led on their own. Skip setting FSENG control on 'status' due * to unexpected operation and 'error' due to not being a supported automatic diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index a97edabcb85a..17c4c2c89c2e 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -65,7 +65,7 @@ #include "probe_roms.h" #define MAJ 1 -#define MIN 0 +#define MIN 1 #define BUILD 0 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ __stringify(BUILD) @@ -94,7 +94,7 @@ MODULE_DEVICE_TABLE(pci, isci_id_table); /* linux isci specific settings */ -unsigned char no_outbound_task_to = 20; +unsigned char no_outbound_task_to = 2; module_param(no_outbound_task_to, byte, 0); MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)"); @@ -114,7 +114,7 @@ u16 stp_inactive_to = 5; module_param(stp_inactive_to, ushort, 0); MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)"); -unsigned char phy_gen = 3; +unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED; module_param(phy_gen, byte, 0); MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)"); @@ -122,6 +122,14 @@ unsigned char max_concurr_spinup; module_param(max_concurr_spinup, byte, 0); MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); +uint cable_selection_override = CABLE_OVERRIDE_DISABLED; +module_param(cable_selection_override, uint, 0); + +MODULE_PARM_DESC(cable_selection_override, + "This field indicates length of the SAS/SATA cable between " + "host and device. If any bits > 15 are set (default) " + "indicates \"use platform defaults\""); + static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); @@ -412,6 +420,14 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) return NULL; isci_host->shost = shost; + dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: " + "{%s, %s, %s, %s}\n", + (is_cable_select_overridden() ? "* " : ""), isci_host->id, + lookup_cable_names(decode_cable_selection(isci_host, 3)), + lookup_cable_names(decode_cable_selection(isci_host, 2)), + lookup_cable_names(decode_cable_selection(isci_host, 1)), + lookup_cable_names(decode_cable_selection(isci_host, 0))); + err = isci_host_init(isci_host); if (err) goto err_shost; @@ -466,7 +482,8 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic orom = isci_request_oprom(pdev); for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) { - if (sci_oem_parameters_validate(&orom->ctrl[i])) { + if (sci_oem_parameters_validate(&orom->ctrl[i], + orom->hdr.version)) { dev_warn(&pdev->dev, "[%d]: invalid oem parameters detected, falling back to firmware\n", i); devm_kfree(&pdev->dev, orom); diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 8efeb6b08321..234ab46fce33 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -480,6 +480,7 @@ extern u16 ssp_inactive_to; extern u16 stp_inactive_to; extern unsigned char phy_gen; extern unsigned char max_concurr_spinup; +extern uint cable_selection_override; irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 35f50c2183e1..fe18acfd6eb3 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -91,22 +91,23 @@ sci_phy_transport_layer_initialization(struct isci_phy *iphy, static enum sci_status sci_phy_link_layer_initialization(struct isci_phy *iphy, - struct scu_link_layer_registers __iomem *reg) + struct scu_link_layer_registers __iomem *llr) { struct isci_host *ihost = iphy->owning_port->owning_controller; + struct sci_phy_user_params *phy_user; + struct sci_phy_oem_params *phy_oem; int phy_idx = iphy->phy_index; - struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx]; - struct sci_phy_oem_params *phy_oem = - &ihost->oem_parameters.phys[phy_idx]; - u32 phy_configuration; struct sci_phy_cap phy_cap; + u32 phy_configuration; u32 parity_check = 0; u32 parity_count = 0; u32 llctl, link_rate; u32 clksm_value = 0; u32 sp_timeouts = 0; - iphy->link_layer_registers = reg; + phy_user = &ihost->user_parameters.phys[phy_idx]; + phy_oem = &ihost->oem_parameters.phys[phy_idx]; + iphy->link_layer_registers = llr; /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 @@ -116,32 +117,26 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), - &iphy->link_layer_registers->transmit_identification); + &llr->transmit_identification); /* Write the device SAS Address */ - writel(0xFEDCBA98, - &iphy->link_layer_registers->sas_device_name_high); - writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low); + writel(0xFEDCBA98, &llr->sas_device_name_high); + writel(phy_idx, &llr->sas_device_name_low); /* Write the source SAS Address */ - writel(phy_oem->sas_address.high, - &iphy->link_layer_registers->source_sas_address_high); - writel(phy_oem->sas_address.low, - &iphy->link_layer_registers->source_sas_address_low); + writel(phy_oem->sas_address.high, &llr->source_sas_address_high); + writel(phy_oem->sas_address.low, &llr->source_sas_address_low); /* Clear and Set the PHY Identifier */ - writel(0, &iphy->link_layer_registers->identify_frame_phy_id); - writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), - &iphy->link_layer_registers->identify_frame_phy_id); + writel(0, &llr->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), &llr->identify_frame_phy_id); /* Change the initial state of the phy configuration register */ - phy_configuration = - readl(&iphy->link_layer_registers->phy_configuration); + phy_configuration = readl(&llr->phy_configuration); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(phy_configuration, - &iphy->link_layer_registers->phy_configuration); + writel(phy_configuration, &llr->phy_configuration); /* Configure the SNW capabilities */ phy_cap.all = 0; @@ -149,15 +144,64 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, phy_cap.gen3_no_ssc = 1; phy_cap.gen2_no_ssc = 1; phy_cap.gen1_no_ssc = 1; - if (ihost->oem_parameters.controller.do_enable_ssc == true) { + if (ihost->oem_parameters.controller.do_enable_ssc) { + struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe; + struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_idx]; + struct isci_pci_info *pci_info = to_pci_info(ihost->pdev); + bool en_sas = false; + bool en_sata = false; + u32 sas_type = 0; + u32 sata_spread = 0x2; + u32 sas_spread = 0x2; + phy_cap.gen3_ssc = 1; phy_cap.gen2_ssc = 1; phy_cap.gen1_ssc = 1; + + if (pci_info->orom->hdr.version < ISCI_ROM_VER_1_1) + en_sas = en_sata = true; + else { + sata_spread = ihost->oem_parameters.controller.ssc_sata_tx_spread_level; + sas_spread = ihost->oem_parameters.controller.ssc_sas_tx_spread_level; + + if (sata_spread) + en_sata = true; + + if (sas_spread) { + en_sas = true; + sas_type = ihost->oem_parameters.controller.ssc_sas_tx_type; + } + + } + + if (en_sas) { + u32 reg; + + reg = readl(&xcvr->afe_xcvr_control0); + reg |= (0x00100000 | (sas_type << 19)); + writel(reg, &xcvr->afe_xcvr_control0); + + reg = readl(&xcvr->afe_tx_ssc_control); + reg |= sas_spread << 8; + writel(reg, &xcvr->afe_tx_ssc_control); + } + + if (en_sata) { + u32 reg; + + reg = readl(&xcvr->afe_tx_ssc_control); + reg |= sata_spread; + writel(reg, &xcvr->afe_tx_ssc_control); + + reg = readl(&llr->stp_control); + reg |= 1 << 12; + writel(reg, &llr->stp_control); + } } - /* - * The SAS specification indicates that the phy_capabilities that - * are transmitted shall have an even parity. Calculate the parity. */ + /* The SAS specification indicates that the phy_capabilities that + * are transmitted shall have an even parity. Calculate the parity. + */ parity_check = phy_cap.all; while (parity_check != 0) { if (parity_check & 0x1) @@ -165,20 +209,20 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, parity_check >>= 1; } - /* - * If parity indicates there are an odd number of bits set, then - * set the parity bit to 1 in the phy capabilities. */ + /* If parity indicates there are an odd number of bits set, then + * set the parity bit to 1 in the phy capabilities. + */ if ((parity_count % 2) != 0) phy_cap.parity = 1; - writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities); + writel(phy_cap.all, &llr->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup */ writel(SCU_ENSPINUP_GEN_VAL(COUNT, phy_user->notify_enable_spin_up_insertion_frequency), - &iphy->link_layer_registers->notify_enable_spinup_control); + &llr->notify_enable_spinup_control); /* Write the ALIGN Insertion Ferequency for connected phy and * inpendent of connected state @@ -189,11 +233,13 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, phy_user->align_insertion_frequency); - writel(clksm_value, &iphy->link_layer_registers->clock_skew_management); + writel(clksm_value, &llr->clock_skew_management); - /* @todo Provide a way to write this register correctly */ - writel(0x02108421, - &iphy->link_layer_registers->afe_lookup_table_control); + if (is_c0(ihost->pdev) || is_c1(ihost->pdev)) { + writel(0x04210400, &llr->afe_lookup_table_control); + writel(0x020A7C05, &llr->sas_primitive_timeout); + } else + writel(0x02108421, &llr->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, (u8)ihost->user_parameters.no_outbound_task_timeout); @@ -210,9 +256,9 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, break; } llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); - writel(llctl, &iphy->link_layer_registers->link_layer_control); + writel(llctl, &llr->link_layer_control); - sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts); + sp_timeouts = readl(&llr->sas_phy_timeouts); /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */ sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF); @@ -222,20 +268,23 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, */ sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B); - writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts); + writel(sp_timeouts, &llr->sas_phy_timeouts); if (is_a2(ihost->pdev)) { - /* Program the max ARB time for the PHY to 700us so we inter-operate with - * the PMC expander which shuts down PHYs if the expander PHY generates too - * many breaks. This time value will guarantee that the initiator PHY will - * generate the break. + /* Program the max ARB time for the PHY to 700us so we + * inter-operate with the PMC expander which shuts down + * PHYs if the expander PHY generates too many breaks. + * This time value will guarantee that the initiator PHY + * will generate the break. */ writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, - &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout); + &llr->maximum_arbitration_wait_timer_timeout); } - /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */ - writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout); + /* Disable link layer hang detection, rely on the OS timeout for + * I/O timeouts. + */ + writel(0, &llr->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ sci_change_state(&iphy->sm, SCI_PHY_STOPPED); @@ -1049,24 +1098,25 @@ static void scu_link_layer_stop_protocol_engine( writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control); } -/** - * - * - * This method will start the OOB/SN state machine for this struct isci_phy object. - */ -static void scu_link_layer_start_oob( - struct isci_phy *iphy) +static void scu_link_layer_start_oob(struct isci_phy *iphy) { - u32 scu_sas_pcfg_value; - - scu_sas_pcfg_value = - readl(&iphy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - scu_sas_pcfg_value &= - ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | - SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); - writel(scu_sas_pcfg_value, - &iphy->link_layer_registers->phy_configuration); + struct scu_link_layer_registers __iomem *ll = iphy->link_layer_registers; + u32 val; + + /** Reset OOB sequence - start */ + val = readl(&ll->phy_configuration); + val &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); + writel(val, &ll->phy_configuration); + readl(&ll->phy_configuration); /* flush */ + /** Reset OOB sequence - end */ + + /** Start OOB sequence - start */ + val = readl(&ll->phy_configuration); + val |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + writel(val, &ll->phy_configuration); + readl(&ll->phy_configuration); /* flush */ + /** Start OOB sequence - end */ } /** diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index ac7f27749f97..7c6ac58a5c4c 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -114,7 +114,7 @@ static u32 sci_port_get_phys(struct isci_port *iport) * value is returned if the specified port is not valid. When this value is * returned, no data is copied to the properties output parameter. */ -static enum sci_status sci_port_get_properties(struct isci_port *iport, +enum sci_status sci_port_get_properties(struct isci_port *iport, struct sci_port_properties *prop) { if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT) @@ -647,19 +647,26 @@ void sci_port_setup_transports(struct isci_port *iport, u32 device_id) } } -static void sci_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy, - bool do_notify_user) +static void sci_port_resume_phy(struct isci_port *iport, struct isci_phy *iphy) +{ + sci_phy_resume(iphy); + iport->enabled_phy_mask |= 1 << iphy->phy_index; +} + +static void sci_port_activate_phy(struct isci_port *iport, + struct isci_phy *iphy, + u8 flags) { struct isci_host *ihost = iport->owning_controller; - if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) + if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA && (flags & PF_RESUME)) sci_phy_resume(iphy); iport->active_phy_mask |= 1 << iphy->phy_index; sci_controller_clear_invalid_phy(ihost, iphy); - if (do_notify_user == true) + if (flags & PF_NOTIFY) isci_port_link_up(ihost, iport, iphy); } @@ -669,14 +676,19 @@ void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, struct isci_host *ihost = iport->owning_controller; iport->active_phy_mask &= ~(1 << iphy->phy_index); + iport->enabled_phy_mask &= ~(1 << iphy->phy_index); if (!iport->active_phy_mask) iport->last_active_phy = iphy->phy_index; iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; - /* Re-assign the phy back to the LP as if it were a narrow port */ - writel(iphy->phy_index, - &iport->port_pe_configuration_register[iphy->phy_index]); + /* Re-assign the phy back to the LP as if it were a narrow port for APC + * mode. For MPC mode, the phy will remain in the port. + */ + if (iport->owning_controller->oem_parameters.controller.mode_type == + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) + writel(iphy->phy_index, + &iport->port_pe_configuration_register[iphy->phy_index]); if (do_notify_user == true) isci_port_link_down(ihost, iphy, iport); @@ -701,18 +713,16 @@ static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *i * sci_port_general_link_up_handler - phy can be assigned to port? * @sci_port: sci_port object for which has a phy that has gone link up. * @sci_phy: This is the struct isci_phy object that has gone link up. - * @do_notify_user: This parameter specifies whether to inform the user (via - * sci_port_link_up()) as to the fact that a new phy as become ready. + * @flags: PF_RESUME, PF_NOTIFY to sci_port_activate_phy * - * Determine if this phy can be assigned to this - * port . If the phy is not a valid PHY for - * this port then the function will notify the user. A PHY can only be - * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in - * the same port. none + * Determine if this phy can be assigned to this port . If the phy is + * not a valid PHY for this port then the function will notify the user. + * A PHY can only be part of a port if it's attached SAS ADDRESS is the + * same as all other PHYs in the same port. */ static void sci_port_general_link_up_handler(struct isci_port *iport, - struct isci_phy *iphy, - bool do_notify_user) + struct isci_phy *iphy, + u8 flags) { struct sci_sas_address port_sas_address; struct sci_sas_address phy_sas_address; @@ -730,7 +740,7 @@ static void sci_port_general_link_up_handler(struct isci_port *iport, iport->active_phy_mask == 0) { struct sci_base_state_machine *sm = &iport->sm; - sci_port_activate_phy(iport, iphy, do_notify_user); + sci_port_activate_phy(iport, iphy, flags); if (sm->current_state_id == SCI_PORT_RESETTING) port_state_machine_change(iport, SCI_PORT_READY); } else @@ -781,11 +791,16 @@ bool sci_port_link_detected( struct isci_phy *iphy) { if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) && - (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && - sci_port_is_wide(iport)) { - sci_port_invalid_link_up(iport, iphy); - - return false; + (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA)) { + if (sci_port_is_wide(iport)) { + sci_port_invalid_link_up(iport, iphy); + return false; + } else { + struct isci_host *ihost = iport->owning_controller; + struct isci_port *dst_port = &(ihost->ports[iphy->phy_index]); + writel(iphy->phy_index, + &dst_port->port_pe_configuration_register[iphy->phy_index]); + } } return true; @@ -975,6 +990,13 @@ static void sci_port_ready_substate_waiting_enter(struct sci_base_state_machine } } +static void scic_sds_port_ready_substate_waiting_exit( + struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + sci_port_resume_port_task_scheduler(iport); +} + static void sci_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) { u32 index; @@ -988,13 +1010,13 @@ static void sci_port_ready_substate_operational_enter(struct sci_base_state_mach writel(iport->physical_port_index, &iport->port_pe_configuration_register[ iport->phy_table[index]->phy_index]); + if (((iport->active_phy_mask^iport->enabled_phy_mask) & (1 << index)) != 0) + sci_port_resume_phy(iport, iport->phy_table[index]); } } sci_port_update_viit_entry(iport); - sci_port_resume_port_task_scheduler(iport); - /* * Post the dummy task for the port so the hardware can schedule * io correctly @@ -1061,20 +1083,9 @@ static void sci_port_ready_substate_configuring_enter(struct sci_base_state_mach if (iport->active_phy_mask == 0) { isci_port_not_ready(ihost, iport); - port_state_machine_change(iport, - SCI_PORT_SUB_WAITING); - } else if (iport->started_request_count == 0) - port_state_machine_change(iport, - SCI_PORT_SUB_OPERATIONAL); -} - -static void sci_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) -{ - struct isci_port *iport = container_of(sm, typeof(*iport), sm); - - sci_port_suspend_port_task_scheduler(iport); - if (iport->ready_exit) - sci_port_invalidate_dummy_remote_node(iport); + port_state_machine_change(iport, SCI_PORT_SUB_WAITING); + } else + port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); } enum sci_status sci_port_start(struct isci_port *iport) @@ -1252,7 +1263,7 @@ enum sci_status sci_port_add_phy(struct isci_port *iport, if (status != SCI_SUCCESS) return status; - sci_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY|PF_RESUME); iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); @@ -1262,7 +1273,7 @@ enum sci_status sci_port_add_phy(struct isci_port *iport, if (status != SCI_SUCCESS) return status; - sci_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY); /* Re-enter the configuring state since this may be the last phy in * the port. @@ -1338,13 +1349,13 @@ enum sci_status sci_port_link_up(struct isci_port *iport, /* Since this is the first phy going link up for the port we * can just enable it and continue */ - sci_port_activate_phy(iport, iphy, true); + sci_port_activate_phy(iport, iphy, PF_NOTIFY|PF_RESUME); port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); return SCI_SUCCESS; case SCI_PORT_SUB_OPERATIONAL: - sci_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY|PF_RESUME); return SCI_SUCCESS; case SCI_PORT_RESETTING: /* TODO We should make sure that the phy that has gone @@ -1361,7 +1372,7 @@ enum sci_status sci_port_link_up(struct isci_port *iport, /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ - sci_port_general_link_up_handler(iport, iphy, false); + sci_port_general_link_up_handler(iport, iphy, PF_RESUME); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(iport), @@ -1584,14 +1595,14 @@ static const struct sci_base_state sci_port_state_table[] = { }, [SCI_PORT_SUB_WAITING] = { .enter_state = sci_port_ready_substate_waiting_enter, + .exit_state = scic_sds_port_ready_substate_waiting_exit, }, [SCI_PORT_SUB_OPERATIONAL] = { .enter_state = sci_port_ready_substate_operational_enter, .exit_state = sci_port_ready_substate_operational_exit }, [SCI_PORT_SUB_CONFIGURING] = { - .enter_state = sci_port_ready_substate_configuring_enter, - .exit_state = sci_port_ready_substate_configuring_exit + .enter_state = sci_port_ready_substate_configuring_enter }, [SCI_PORT_RESETTING] = { .exit_state = sci_port_resetting_state_exit @@ -1609,6 +1620,7 @@ void sci_port_construct(struct isci_port *iport, u8 index, iport->logical_port_index = SCIC_SDS_DUMMY_PORT; iport->physical_port_index = index; iport->active_phy_mask = 0; + iport->enabled_phy_mask = 0; iport->last_active_phy = 0; iport->ready_exit = false; diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index cb5ffbc38603..08116090eb70 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -63,6 +63,9 @@ #define SCIC_SDS_DUMMY_PORT 0xFF +#define PF_NOTIFY (1 << 0) +#define PF_RESUME (1 << 1) + struct isci_phy; struct isci_host; @@ -83,6 +86,8 @@ enum isci_status { * @logical_port_index: software port index * @physical_port_index: hardware port index * @active_phy_mask: identifies phy members + * @enabled_phy_mask: phy mask for the port + * that are already part of the port * @reserved_tag: * @reserved_rni: reserver for port task scheduler workaround * @started_request_count: reference count for outstanding commands @@ -104,6 +109,7 @@ struct isci_port { u8 logical_port_index; u8 physical_port_index; u8 active_phy_mask; + u8 enabled_phy_mask; u8 last_active_phy; u16 reserved_rni; u16 reserved_tag; @@ -250,6 +256,10 @@ bool sci_port_link_detected( struct isci_port *iport, struct isci_phy *iphy); +enum sci_status sci_port_get_properties( + struct isci_port *iport, + struct sci_port_properties *prop); + enum sci_status sci_port_link_up(struct isci_port *iport, struct isci_phy *iphy); enum sci_status sci_port_link_down(struct isci_port *iport, diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index 38a99d281141..6d1e9544cbe5 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -57,7 +57,7 @@ #define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) #define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) -#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100) +#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (250) enum SCIC_SDS_APC_ACTIVITY { SCIC_SDS_APC_SKIP_PHY, @@ -466,6 +466,23 @@ sci_apc_agent_validate_phy_configuration(struct isci_host *ihost, return sci_port_configuration_agent_validate_ports(ihost, port_agent); } +/* + * This routine will restart the automatic port configuration timeout + * timer for the next time period. This could be caused by either a link + * down event or a link up event where we can not yet tell to which a phy + * belongs. + */ +static void sci_apc_agent_start_timer( + struct sci_port_configuration_agent *port_agent, + u32 timeout) +{ + if (port_agent->timer_pending) + sci_del_timer(&port_agent->timer); + + port_agent->timer_pending = true; + sci_mod_timer(&port_agent->timer, timeout); +} + static void sci_apc_agent_configure_ports(struct isci_host *ihost, struct sci_port_configuration_agent *port_agent, struct isci_phy *iphy, @@ -565,17 +582,8 @@ static void sci_apc_agent_configure_ports(struct isci_host *ihost, break; case SCIC_SDS_APC_START_TIMER: - /* - * This can occur for either a link down event, or a link - * up event where we cannot yet tell the port to which a - * phy belongs. - */ - if (port_agent->timer_pending) - sci_del_timer(&port_agent->timer); - - port_agent->timer_pending = true; - sci_mod_timer(&port_agent->timer, - SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); + sci_apc_agent_start_timer(port_agent, + SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); break; case SCIC_SDS_APC_SKIP_PHY: @@ -607,7 +615,8 @@ static void sci_apc_agent_link_up(struct isci_host *ihost, if (!iport) { /* the phy is not the part of this port */ port_agent->phy_ready_mask |= 1 << phy_index; - sci_apc_agent_configure_ports(ihost, port_agent, iphy, true); + sci_apc_agent_start_timer(port_agent, + SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); } else { /* the phy is already the part of the port */ u32 port_state = iport->sm.current_state_id; diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index b5f4341de243..9b8117b9d756 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -147,7 +147,7 @@ struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmw memcpy(orom, fw->data, fw->size); - if (is_c0(pdev)) + if (is_c0(pdev) || is_c1(pdev)) goto out; /* diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 2c75248ca326..bb0e9d4d97c9 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -152,7 +152,7 @@ struct sci_user_parameters { #define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 struct sci_oem_params; -int sci_oem_parameters_validate(struct sci_oem_params *oem); +int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version); struct isci_orom; struct isci_orom *isci_request_oprom(struct pci_dev *pdev); @@ -191,6 +191,11 @@ struct isci_oem_hdr { 0x1a, 0x04, 0xc6) #define ISCI_EFI_VAR_NAME "RstScuO" +#define ISCI_ROM_VER_1_0 0x10 +#define ISCI_ROM_VER_1_1 0x11 +#define ISCI_ROM_VER_1_3 0x13 +#define ISCI_ROM_VER_LATEST ISCI_ROM_VER_1_3 + /* Allowed PORT configuration modes APC Automatic PORT configuration mode is * defined by the OEM configuration parameters providing no PHY_MASK parameters * for any PORT. i.e. There are no phys assigned to any of the ports at start. @@ -220,8 +225,86 @@ struct sci_oem_params { struct { uint8_t mode_type; uint8_t max_concurr_spin_up; - uint8_t do_enable_ssc; - uint8_t reserved; + /* + * This bitfield indicates the OEM's desired default Tx + * Spread Spectrum Clocking (SSC) settings for SATA and SAS. + * NOTE: Default SSC Modulation Frequency is 31.5KHz. + */ + union { + struct { + /* + * NOTE: Max spread for SATA is +0 / -5000 PPM. + * Down-spreading SSC (only method allowed for SATA): + * SATA SSC Tx Disabled = 0x0 + * SATA SSC Tx at +0 / -1419 PPM Spread = 0x2 + * SATA SSC Tx at +0 / -2129 PPM Spread = 0x3 + * SATA SSC Tx at +0 / -4257 PPM Spread = 0x6 + * SATA SSC Tx at +0 / -4967 PPM Spread = 0x7 + */ + uint8_t ssc_sata_tx_spread_level:4; + /* + * SAS SSC Tx Disabled = 0x0 + * + * NOTE: Max spread for SAS down-spreading +0 / + * -2300 PPM + * Down-spreading SSC: + * SAS SSC Tx at +0 / -1419 PPM Spread = 0x2 + * SAS SSC Tx at +0 / -2129 PPM Spread = 0x3 + * + * NOTE: Max spread for SAS center-spreading +2300 / + * -2300 PPM + * Center-spreading SSC: + * SAS SSC Tx at +1064 / -1064 PPM Spread = 0x3 + * SAS SSC Tx at +2129 / -2129 PPM Spread = 0x6 + */ + uint8_t ssc_sas_tx_spread_level:3; + /* + * NOTE: Refer to the SSC section of the SAS 2.x + * Specification for proper setting of this field. + * For standard SAS Initiator SAS PHY operation it + * should be 0 for Down-spreading. + * SAS SSC Tx spread type: + * Down-spreading SSC = 0 + * Center-spreading SSC = 1 + */ + uint8_t ssc_sas_tx_type:1; + }; + uint8_t do_enable_ssc; + }; + /* + * This field indicates length of the SAS/SATA cable between + * host and device. + * This field is used make relationship between analog + * parameters of the phy in the silicon and length of the cable. + * Supported cable attenuation levels: + * "short"- up to 3m, "medium"-3m to 6m, and "long"- more than + * 6m. + * + * This is bit mask field: + * + * BIT: (MSB) 7 6 5 4 + * ASSIGNMENT: <phy3><phy2><phy1><phy0> - Medium cable + * length assignment + * BIT: 3 2 1 0 (LSB) + * ASSIGNMENT: <phy3><phy2><phy1><phy0> - Long cable length + * assignment + * + * BITS 7-4 are set when the cable length is assigned to medium + * BITS 3-0 are set when the cable length is assigned to long + * + * The BIT positions are clear when the cable length is + * assigned to short. + * + * Setting the bits for both long and medium cable length is + * undefined. + * + * A value of 0x84 would assign + * phy3 - medium + * phy2 - long + * phy1 - short + * phy0 - short + */ + uint8_t cable_selection_mask; } controller; struct { diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index b207cd3b15a0..dd74b6ceeb82 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <scsi/sas.h> +#include <linux/bitops.h> #include "isci.h" #include "port.h" #include "remote_device.h" @@ -1101,6 +1102,7 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, struct isci_remote_device *idev) { enum sci_status status; + struct sci_port_properties properties; struct domain_device *dev = idev->domain_dev; sci_remote_device_construct(iport, idev); @@ -1110,6 +1112,11 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, * entries will be needed to store the remote node. */ idev->is_direct_attached = true; + + sci_port_get_properties(iport, &properties); + /* Get accurate port width from port's phy mask for a DA device. */ + idev->device_port_width = hweight32(properties.phy_mask); + status = sci_controller_allocate_remote_node_context(iport->owning_controller, idev, &idev->rnc.remote_node_index); @@ -1125,9 +1132,6 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, idev->connection_rate = sci_port_get_max_allowed_speed(iport); - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - idev->device_port_width = 1; - return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 66ad3dc89498..f5a3f7d2bdab 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -496,7 +496,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost, } } - isci_print_tmf(tmf); + isci_print_tmf(ihost, tmf); if (tmf->status == SCI_SUCCESS) ret = TMF_RESP_FUNC_COMPLETE; diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index bc78c0a41d5c..1b27b3797c6c 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -106,7 +106,6 @@ struct isci_tmf { } resp; unsigned char lun[8]; u16 io_tag; - struct isci_remote_device *device; enum isci_tmf_function_codes tmf_code; int status; @@ -120,10 +119,10 @@ struct isci_tmf { }; -static inline void isci_print_tmf(struct isci_tmf *tmf) +static inline void isci_print_tmf(struct isci_host *ihost, struct isci_tmf *tmf) { if (SAS_PROTOCOL_SATA == tmf->proto) - dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: status = %x\n" "tmf->resp.d2h_fis.status = %x\n" "tmf->resp.d2h_fis.error = %x\n", @@ -132,7 +131,7 @@ static inline void isci_print_tmf(struct isci_tmf *tmf) tmf->resp.d2h_fis.status, tmf->resp.d2h_fis.error); else - dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: status = %x\n" "tmf->resp.resp_iu.data_present = %x\n" "tmf->resp.resp_iu.status = %x\n" diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 7269e928824a..1d1b0c9da29b 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -61,7 +61,7 @@ static void fc_disc_restart(struct fc_disc *); * Locking Note: This function expects that the lport mutex is locked before * calling it. */ -void fc_disc_stop_rports(struct fc_disc *disc) +static void fc_disc_stop_rports(struct fc_disc *disc) { struct fc_lport *lport; struct fc_rport_priv *rdata; @@ -682,7 +682,7 @@ static int fc_disc_single(struct fc_lport *lport, struct fc_disc_port *dp) * fc_disc_stop() - Stop discovery for a given lport * @lport: The local port that discovery should stop on */ -void fc_disc_stop(struct fc_lport *lport) +static void fc_disc_stop(struct fc_lport *lport) { struct fc_disc *disc = &lport->disc; @@ -698,7 +698,7 @@ void fc_disc_stop(struct fc_lport *lport) * This function will block until discovery has been * completely stopped and all rports have been deleted. */ -void fc_disc_stop_final(struct fc_lport *lport) +static void fc_disc_stop_final(struct fc_lport *lport) { fc_disc_stop(lport); lport->tt.rport_flush_queue(); diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c index fb9161dc4ca6..e17a28d324d0 100644 --- a/drivers/scsi/libfc/fc_elsct.c +++ b/drivers/scsi/libfc/fc_elsct.c @@ -28,6 +28,7 @@ #include <scsi/fc/fc_els.h> #include <scsi/libfc.h> #include <scsi/fc_encode.h> +#include "fc_libfc.h" /** * fc_elsct_send() - Send an ELS or CT frame diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 9de9db27e874..4d70d96fa5dc 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -91,7 +91,7 @@ struct fc_exch_pool { * It manages the allocation of exchange IDs. */ struct fc_exch_mgr { - struct fc_exch_pool *pool; + struct fc_exch_pool __percpu *pool; mempool_t *ep_pool; enum fc_class class; struct kref kref; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 221875ec3d7c..f607314810ac 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -155,6 +155,7 @@ static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp) fsp->xfer_ddp = FC_XID_UNKNOWN; atomic_set(&fsp->ref_cnt, 1); init_timer(&fsp->timer); + fsp->timer.data = (unsigned long)fsp; INIT_LIST_HEAD(&fsp->list); spin_lock_init(&fsp->scsi_pkt_lock); } @@ -1850,9 +1851,6 @@ int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd) } put_cpu(); - init_timer(&fsp->timer); - fsp->timer.data = (unsigned long)fsp; - /* * send it to the lower layer * if we get -1 return then put the request in the pending diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e77094a587ed..83750ebb527f 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -677,7 +677,8 @@ EXPORT_SYMBOL(fc_set_mfs); * @lport: The local port receiving the event * @event: The discovery event */ -void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event) +static void fc_lport_disc_callback(struct fc_lport *lport, + enum fc_disc_event event) { switch (event) { case DISC_EV_SUCCESS: @@ -1568,7 +1569,7 @@ EXPORT_SYMBOL(fc_lport_flogi_resp); * Locking Note: The lport lock is expected to be held before calling * this routine. */ -void fc_lport_enter_flogi(struct fc_lport *lport) +static void fc_lport_enter_flogi(struct fc_lport *lport) { struct fc_frame *fp; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index b9e434844a69..83aa1efec875 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -391,7 +391,7 @@ static void fc_rport_work(struct work_struct *work) * If it appears we are already logged in, ADISC is used to verify * the setup. */ -int fc_rport_login(struct fc_rport_priv *rdata) +static int fc_rport_login(struct fc_rport_priv *rdata) { mutex_lock(&rdata->rp_mutex); @@ -451,7 +451,7 @@ static void fc_rport_enter_delete(struct fc_rport_priv *rdata, * function will hold the rport lock, call an _enter_* * function and then unlock the rport. */ -int fc_rport_logoff(struct fc_rport_priv *rdata) +static int fc_rport_logoff(struct fc_rport_priv *rdata) { mutex_lock(&rdata->rp_mutex); @@ -653,8 +653,8 @@ static int fc_rport_login_complete(struct fc_rport_priv *rdata, * @fp: The FLOGI response frame * @rp_arg: The remote port that received the FLOGI response */ -void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, - void *rp_arg) +static void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) { struct fc_rport_priv *rdata = rp_arg; struct fc_lport *lport = rdata->local_port; @@ -1520,7 +1520,7 @@ reject: * * Locking Note: Called with the lport lock held. */ -void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp) +static void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp) { struct fc_seq_els_data els_data; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 5c1776406c96..15eefa1d61fd 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -306,19 +306,22 @@ mega_query_adapter(adapter_t *adapter) adapter->host->sg_tablesize = adapter->sglen; - /* use HP firmware and bios version encoding */ + /* use HP firmware and bios version encoding + Note: fw_version[0|1] and bios_version[0|1] were originally shifted + right 8 bits making them zero. This 0 value was hardcoded to fix + sparse warnings. */ if (adapter->product_info.subsysvid == HP_SUBSYS_VID) { sprintf (adapter->fw_version, "%c%d%d.%d%d", adapter->product_info.fw_version[2], - adapter->product_info.fw_version[1] >> 8, + 0, adapter->product_info.fw_version[1] & 0x0f, - adapter->product_info.fw_version[0] >> 8, + 0, adapter->product_info.fw_version[0] & 0x0f); sprintf (adapter->bios_version, "%c%d%d.%d%d", adapter->product_info.bios_version[2], - adapter->product_info.bios_version[1] >> 8, + 0, adapter->product_info.bios_version[1] & 0x0f, - adapter->product_info.bios_version[0] >> 8, + 0, adapter->product_info.bios_version[0] & 0x0f); } else { memcpy(adapter->fw_version, diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index dd94c7d574fb..e5f416f8042d 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -33,9 +33,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.06.12-rc1" -#define MEGASAS_RELDATE "Oct. 5, 2011" -#define MEGASAS_EXT_VERSION "Wed. Oct. 5 17:00:00 PDT 2011" +#define MEGASAS_VERSION "00.00.06.14-rc1" +#define MEGASAS_RELDATE "Jan. 6, 2012" +#define MEGASAS_EXT_VERSION "Fri. Jan. 6 17:00:00 PDT 2012" /* * Device IDs @@ -773,7 +773,6 @@ struct megasas_ctrl_info { #define MFI_OB_INTR_STATUS_MASK 0x00000002 #define MFI_POLL_TIMEOUT_SECS 60 -#define MEGASAS_COMPLETION_TIMER_INTERVAL (HZ/10) #define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000 #define MFI_REPLY_GEN2_MESSAGE_INTERRUPT 0x00000001 @@ -1353,7 +1352,6 @@ struct megasas_instance { u32 mfiStatus; u32 last_seq_num; - struct timer_list io_completion_timer; struct list_head internal_reset_pending_q; /* Ptr to hba specific information */ diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 29a994f9c4f1..8b300be44284 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -18,7 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * FILE: megaraid_sas_base.c - * Version : v00.00.06.12-rc1 + * Version : v00.00.06.14-rc1 * * Authors: LSI Corporation * Sreenivas Bagalkote @@ -59,14 +59,6 @@ #include "megaraid_sas.h" /* - * poll_mode_io:1- schedule complete completion from q cmd - */ -static unsigned int poll_mode_io; -module_param_named(poll_mode_io, poll_mode_io, int, 0); -MODULE_PARM_DESC(poll_mode_io, - "Complete cmds from IO path, (default=0)"); - -/* * Number of sectors per IO command * Will be set in megasas_init_mfi if user does not provide */ @@ -1439,11 +1431,6 @@ megasas_build_and_issue_cmd(struct megasas_instance *instance, instance->instancet->fire_cmd(instance, cmd->frame_phys_addr, cmd->frame_count-1, instance->reg_set); - /* - * Check if we have pend cmds to be completed - */ - if (poll_mode_io && atomic_read(&instance->fw_outstanding)) - tasklet_schedule(&instance->isr_tasklet); return 0; out_return_cmd: @@ -3370,47 +3357,6 @@ fail_fw_init: return -EINVAL; } -/** - * megasas_start_timer - Initializes a timer object - * @instance: Adapter soft state - * @timer: timer object to be initialized - * @fn: timer function - * @interval: time interval between timer function call - */ -static inline void -megasas_start_timer(struct megasas_instance *instance, - struct timer_list *timer, - void *fn, unsigned long interval) -{ - init_timer(timer); - timer->expires = jiffies + interval; - timer->data = (unsigned long)instance; - timer->function = fn; - add_timer(timer); -} - -/** - * megasas_io_completion_timer - Timer fn - * @instance_addr: Address of adapter soft state - * - * Schedules tasklet for cmd completion - * if poll_mode_io is set - */ -static void -megasas_io_completion_timer(unsigned long instance_addr) -{ - struct megasas_instance *instance = - (struct megasas_instance *)instance_addr; - - if (atomic_read(&instance->fw_outstanding)) - tasklet_schedule(&instance->isr_tasklet); - - /* Restart timer */ - if (poll_mode_io) - mod_timer(&instance->io_completion_timer, - jiffies + MEGASAS_COMPLETION_TIMER_INTERVAL); -} - static u32 megasas_init_adapter_mfi(struct megasas_instance *instance) { @@ -3638,11 +3584,6 @@ static int megasas_init_fw(struct megasas_instance *instance) tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet, (unsigned long)instance); - /* Initialize the cmd completion timer */ - if (poll_mode_io) - megasas_start_timer(instance, &instance->io_completion_timer, - megasas_io_completion_timer, - MEGASAS_COMPLETION_TIMER_INTERVAL); return 0; fail_init_adapter: @@ -4369,9 +4310,6 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state) host = instance->host; instance->unload = 1; - if (poll_mode_io) - del_timer_sync(&instance->io_completion_timer); - megasas_flush_cache(instance); megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN); @@ -4511,12 +4449,6 @@ megasas_resume(struct pci_dev *pdev) } instance->instancet->enable_intr(instance->reg_set); - - /* Initialize the cmd completion timer */ - if (poll_mode_io) - megasas_start_timer(instance, &instance->io_completion_timer, - megasas_io_completion_timer, - MEGASAS_COMPLETION_TIMER_INTERVAL); instance->unload = 0; /* @@ -4570,9 +4502,6 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev) host = instance->host; fusion = instance->ctrl_context; - if (poll_mode_io) - del_timer_sync(&instance->io_completion_timer); - scsi_remove_host(instance->host); megasas_flush_cache(instance); megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN); @@ -4773,6 +4702,8 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE); cmd->frame->hdr.context = cmd->index; cmd->frame->hdr.pad_0 = 0; + cmd->frame->hdr.flags &= ~(MFI_FRAME_IEEE | MFI_FRAME_SGL64 | + MFI_FRAME_SENSE64); /* * The management interface between applications and the fw uses @@ -5219,60 +5150,6 @@ megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t coun static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl, megasas_sysfs_set_dbg_lvl); -static ssize_t -megasas_sysfs_show_poll_mode_io(struct device_driver *dd, char *buf) -{ - return sprintf(buf, "%u\n", poll_mode_io); -} - -static ssize_t -megasas_sysfs_set_poll_mode_io(struct device_driver *dd, - const char *buf, size_t count) -{ - int retval = count; - int tmp = poll_mode_io; - int i; - struct megasas_instance *instance; - - if (sscanf(buf, "%u", &poll_mode_io) < 1) { - printk(KERN_ERR "megasas: could not set poll_mode_io\n"); - retval = -EINVAL; - } - - /* - * Check if poll_mode_io is already set or is same as previous value - */ - if ((tmp && poll_mode_io) || (tmp == poll_mode_io)) - goto out; - - if (poll_mode_io) { - /* - * Start timers for all adapters - */ - for (i = 0; i < megasas_mgmt_info.max_index; i++) { - instance = megasas_mgmt_info.instance[i]; - if (instance) { - megasas_start_timer(instance, - &instance->io_completion_timer, - megasas_io_completion_timer, - MEGASAS_COMPLETION_TIMER_INTERVAL); - } - } - } else { - /* - * Delete timers for all adapters - */ - for (i = 0; i < megasas_mgmt_info.max_index; i++) { - instance = megasas_mgmt_info.instance[i]; - if (instance) - del_timer_sync(&instance->io_completion_timer); - } - } - -out: - return retval; -} - static void megasas_aen_polling(struct work_struct *work) { @@ -5502,11 +5379,6 @@ megasas_aen_polling(struct work_struct *work) kfree(ev); } - -static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUSR, - megasas_sysfs_show_poll_mode_io, - megasas_sysfs_set_poll_mode_io); - /** * megasas_init - Driver load entry point */ @@ -5566,11 +5438,6 @@ static int __init megasas_init(void) if (rval) goto err_dcf_dbg_lvl; rval = driver_create_file(&megasas_pci_driver.driver, - &driver_attr_poll_mode_io); - if (rval) - goto err_dcf_poll_mode_io; - - rval = driver_create_file(&megasas_pci_driver.driver, &driver_attr_support_device_change); if (rval) goto err_dcf_support_device_change; @@ -5579,10 +5446,6 @@ static int __init megasas_init(void) err_dcf_support_device_change: driver_remove_file(&megasas_pci_driver.driver, - &driver_attr_poll_mode_io); - -err_dcf_poll_mode_io: - driver_remove_file(&megasas_pci_driver.driver, &driver_attr_dbg_lvl); err_dcf_dbg_lvl: driver_remove_file(&megasas_pci_driver.driver, @@ -5607,8 +5470,6 @@ err_pcidrv: static void __exit megasas_exit(void) { driver_remove_file(&megasas_pci_driver.driver, - &driver_attr_poll_mode_io); - driver_remove_file(&megasas_pci_driver.driver, &driver_attr_dbg_lvl); driver_remove_file(&megasas_pci_driver.driver, &driver_attr_support_poll_for_event); diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c index 5255dd688aca..294abb0defa6 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fp.c +++ b/drivers/scsi/megaraid/megaraid_sas_fp.c @@ -282,7 +282,9 @@ u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow, else { *pDevHandle = MR_PD_INVALID; /* set dev handle as invalid. */ if ((raid->level >= 5) && - (instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER)) + ((instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER) || + (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER && + raid->regTypeReqOnRead != REGION_TYPE_UNUSED))) pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE; else if (raid->level == 1) { /* Get alternate Pd. */ diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 22a3ff02e48a..bfe68545203f 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -150,6 +150,8 @@ #define QL4_SESS_RECOVERY_TMO 120 /* iSCSI session */ /* recovery timeout */ +#define MSB(x) ((uint8_t)((uint16_t)(x) >> 8)) +#define LSW(x) ((uint16_t)(x)) #define LSDW(x) ((u32)((u64)(x))) #define MSDW(x) ((u32)((((u64)(x)) >> 16) >> 16)) @@ -671,6 +673,7 @@ struct scsi_qla_host { uint16_t pri_ddb_idx; uint16_t sec_ddb_idx; int is_reset; + uint16_t temperature; }; struct ql4_task_data { diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 1bdfa8120ac8..90614f38b55d 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -697,6 +697,9 @@ int qla4xxx_start_firmware(struct scsi_qla_host *ha) writel(set_rmask(CSR_SCSI_PROCESSOR_INTR), &ha->reg->ctrl_status); readl(&ha->reg->ctrl_status); + writel(set_rmask(CSR_SCSI_COMPLETION_INTR), + &ha->reg->ctrl_status); + readl(&ha->reg->ctrl_status); spin_unlock_irqrestore(&ha->hardware_lock, flags); if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS) { DEBUG2(printk("scsi%ld: %s: Get firmware " diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index c2593782fbbe..e1e66a45e4d0 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -219,6 +219,13 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, ha->mailbox_timeout_count++; mbx_sts[0] = (-1); set_bit(DPC_RESET_HA, &ha->dpc_flags); + if (is_qla8022(ha)) { + ql4_printk(KERN_INFO, ha, + "disabling pause transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); + } goto mbox_exit; } diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 8d6bc1b2ff17..78f1111158d7 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -1875,6 +1875,11 @@ exit: int qla4_8xxx_load_risc(struct scsi_qla_host *ha) { int retval; + + /* clear the interrupt */ + writel(0, &ha->qla4_8xxx_reg->host_int); + readl(&ha->qla4_8xxx_reg->host_int); + retval = qla4_8xxx_device_state_handler(ha); if (retval == QLA_SUCCESS && !test_bit(AF_INIT_DONE, &ha->flags)) diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h index 35376a1c3f1b..dc45ac923691 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.h +++ b/drivers/scsi/qla4xxx/ql4_nx.h @@ -19,12 +19,28 @@ #define PHAN_PEG_RCV_INITIALIZED 0xff01 /*CRB_RELATED*/ -#define QLA82XX_CRB_BASE QLA82XX_CAM_RAM(0x200) -#define QLA82XX_REG(X) (QLA82XX_CRB_BASE+(X)) - +#define QLA82XX_CRB_BASE (QLA82XX_CAM_RAM(0x200)) +#define QLA82XX_REG(X) (QLA82XX_CRB_BASE+(X)) #define CRB_CMDPEG_STATE QLA82XX_REG(0x50) #define CRB_RCVPEG_STATE QLA82XX_REG(0x13c) #define CRB_DMA_SHIFT QLA82XX_REG(0xcc) +#define CRB_TEMP_STATE QLA82XX_REG(0x1b4) + +#define qla82xx_get_temp_val(x) ((x) >> 16) +#define qla82xx_get_temp_state(x) ((x) & 0xffff) +#define qla82xx_encode_temp(val, state) (((val) << 16) | (state)) + +/* + * Temperature control. + */ +enum { + QLA82XX_TEMP_NORMAL = 0x1, /* Normal operating range */ + QLA82XX_TEMP_WARN, /* Sound alert, temperature getting high */ + QLA82XX_TEMP_PANIC /* Fatal error, hardware has shut down. */ +}; + +#define CRB_NIU_XG_PAUSE_CTL_P0 0x1 +#define CRB_NIU_XG_PAUSE_CTL_P1 0x8 #define QLA82XX_HW_H0_CH_HUB_ADR 0x05 #define QLA82XX_HW_H1_CH_HUB_ADR 0x0E diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index ec393a00c038..ce6d3b7f0c61 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -35,43 +35,44 @@ static struct kmem_cache *srb_cachep; int ql4xdisablesysfsboot = 1; module_param(ql4xdisablesysfsboot, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdisablesysfsboot, - "Set to disable exporting boot targets to sysfs\n" - " 0 - Export boot targets\n" - " 1 - Do not export boot targets (Default)"); + " Set to disable exporting boot targets to sysfs.\n" + "\t\t 0 - Export boot targets\n" + "\t\t 1 - Do not export boot targets (Default)"); int ql4xdontresethba = 0; module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdontresethba, - "Don't reset the HBA for driver recovery \n" - " 0 - It will reset HBA (Default)\n" - " 1 - It will NOT reset HBA"); + " Don't reset the HBA for driver recovery.\n" + "\t\t 0 - It will reset HBA (Default)\n" + "\t\t 1 - It will NOT reset HBA"); -int ql4xextended_error_logging = 0; /* 0 = off, 1 = log errors */ +int ql4xextended_error_logging; module_param(ql4xextended_error_logging, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xextended_error_logging, - "Option to enable extended error logging, " - "Default is 0 - no logging, 1 - debug logging"); + " Option to enable extended error logging.\n" + "\t\t 0 - no logging (Default)\n" + "\t\t 2 - debug logging"); int ql4xenablemsix = 1; module_param(ql4xenablemsix, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql4xenablemsix, - "Set to enable MSI or MSI-X interrupt mechanism.\n" - " 0 = enable INTx interrupt mechanism.\n" - " 1 = enable MSI-X interrupt mechanism (Default).\n" - " 2 = enable MSI interrupt mechanism."); + " Set to enable MSI or MSI-X interrupt mechanism.\n" + "\t\t 0 = enable INTx interrupt mechanism.\n" + "\t\t 1 = enable MSI-X interrupt mechanism (Default).\n" + "\t\t 2 = enable MSI interrupt mechanism."); #define QL4_DEF_QDEPTH 32 static int ql4xmaxqdepth = QL4_DEF_QDEPTH; module_param(ql4xmaxqdepth, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xmaxqdepth, - "Maximum queue depth to report for target devices.\n" - " Default: 32."); + " Maximum queue depth to report for target devices.\n" + "\t\t Default: 32."); static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO; module_param(ql4xsess_recovery_tmo, int, S_IRUGO); MODULE_PARM_DESC(ql4xsess_recovery_tmo, "Target Session Recovery Timeout.\n" - " Default: 120 sec."); + "\t\t Default: 120 sec."); static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha); /* @@ -1630,7 +1631,9 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, /* Update timers after login */ ddb_entry->default_relogin_timeout = - le16_to_cpu(fw_ddb_entry->def_timeout); + (le16_to_cpu(fw_ddb_entry->def_timeout) > LOGIN_TOV) && + (le16_to_cpu(fw_ddb_entry->def_timeout) < LOGIN_TOV * 10) ? + le16_to_cpu(fw_ddb_entry->def_timeout) : LOGIN_TOV; ddb_entry->default_time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); @@ -1970,6 +1973,42 @@ mem_alloc_error_exit: } /** + * qla4_8xxx_check_temp - Check the ISP82XX temperature. + * @ha: adapter block pointer. + * + * Note: The caller should not hold the idc lock. + **/ +static int qla4_8xxx_check_temp(struct scsi_qla_host *ha) +{ + uint32_t temp, temp_state, temp_val; + int status = QLA_SUCCESS; + + temp = qla4_8xxx_rd_32(ha, CRB_TEMP_STATE); + + temp_state = qla82xx_get_temp_state(temp); + temp_val = qla82xx_get_temp_val(temp); + + if (temp_state == QLA82XX_TEMP_PANIC) { + ql4_printk(KERN_WARNING, ha, "Device temperature %d degrees C" + " exceeds maximum allowed. Hardware has been shut" + " down.\n", temp_val); + status = QLA_ERROR; + } else if (temp_state == QLA82XX_TEMP_WARN) { + if (ha->temperature == QLA82XX_TEMP_NORMAL) + ql4_printk(KERN_WARNING, ha, "Device temperature %d" + " degrees C exceeds operating range." + " Immediate action needed.\n", temp_val); + } else { + if (ha->temperature == QLA82XX_TEMP_WARN) + ql4_printk(KERN_INFO, ha, "Device temperature is" + " now %d degrees C in normal range.\n", + temp_val); + } + ha->temperature = temp_state; + return status; +} + +/** * qla4_8xxx_check_fw_alive - Check firmware health * @ha: Pointer to host adapter structure. * @@ -2040,7 +2079,16 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) test_bit(DPC_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) { dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); - if (dev_state == QLA82XX_DEV_NEED_RESET && + + if (qla4_8xxx_check_temp(ha)) { + ql4_printk(KERN_INFO, ha, "disabling pause" + " transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); + set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags); + qla4xxx_wake_dpc(ha); + } else if (dev_state == QLA82XX_DEV_NEED_RESET && !test_bit(DPC_RESET_HA, &ha->dpc_flags)) { if (!ql4xdontresethba) { ql4_printk(KERN_INFO, ha, "%s: HW State: " @@ -2057,9 +2105,21 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) } else { /* Check firmware health */ if (qla4_8xxx_check_fw_alive(ha)) { + ql4_printk(KERN_INFO, ha, "disabling pause" + " transmit on port 0 & 1.\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0 | + CRB_NIU_XG_PAUSE_CTL_P1); halt_status = qla4_8xxx_rd_32(ha, QLA82XX_PEG_HALT_STATUS1); + if (LSW(MSB(halt_status)) == 0x67) + ql4_printk(KERN_ERR, ha, "%s:" + " Firmware aborted with" + " error code 0x00006700." + " Device is being reset\n", + __func__); + /* Since we cannot change dev_state in interrupt * context, set appropriate DPC flag then wakeup * DPC */ @@ -2078,7 +2138,7 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) } } -void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) +static void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) { struct iscsi_session *sess; struct ddb_entry *ddb_entry; @@ -3826,16 +3886,14 @@ exit_check: return ret; } -static void qla4xxx_free_nt_list(struct list_head *list_nt) +static void qla4xxx_free_ddb_list(struct list_head *list_ddb) { - struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp; + struct qla_ddb_index *ddb_idx, *ddb_idx_tmp; - /* Free up the normaltargets list */ - list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) { - list_del_init(&nt_ddb_idx->list); - vfree(nt_ddb_idx); + list_for_each_entry_safe(ddb_idx, ddb_idx_tmp, list_ddb, list) { + list_del_init(&ddb_idx->list); + vfree(ddb_idx); } - } static struct iscsi_endpoint *qla4xxx_get_ep_fwdb(struct scsi_qla_host *ha, @@ -3884,6 +3942,8 @@ static int qla4xxx_verify_boot_idx(struct scsi_qla_host *ha, uint16_t idx) static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry) { + uint16_t def_timeout; + ddb_entry->ddb_type = FLASH_DDB; ddb_entry->fw_ddb_index = INVALID_ENTRY; ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE; @@ -3894,9 +3954,10 @@ static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha, atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY); atomic_set(&ddb_entry->relogin_timer, 0); atomic_set(&ddb_entry->relogin_retry_count, 0); - + def_timeout = le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout); ddb_entry->default_relogin_timeout = - le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout); + (def_timeout > LOGIN_TOV) && (def_timeout < LOGIN_TOV * 10) ? + def_timeout : LOGIN_TOV; ddb_entry->default_time2wait = le16_to_cpu(ddb_entry->fw_ddb_entry.iscsi_def_time2wait); } @@ -3934,7 +3995,6 @@ static void qla4xxx_wait_for_ip_configuration(struct scsi_qla_host *ha) ip_state == IP_ADDRSTATE_DEPRICATED || ip_state == IP_ADDRSTATE_DISABLING) ip_idx[idx] = -1; - } /* Break if all IP states checked */ @@ -3947,58 +4007,37 @@ static void qla4xxx_wait_for_ip_configuration(struct scsi_qla_host *ha) } while (time_after(wtime, jiffies)); } -void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) +static void qla4xxx_build_st_list(struct scsi_qla_host *ha, + struct list_head *list_st) { + struct qla_ddb_index *st_ddb_idx; int max_ddbs; + int fw_idx_size; + struct dev_db_entry *fw_ddb_entry; + dma_addr_t fw_ddb_dma; int ret; uint32_t idx = 0, next_idx = 0; uint32_t state = 0, conn_err = 0; - uint16_t conn_id; - struct dev_db_entry *fw_ddb_entry; - struct ddb_entry *ddb_entry = NULL; - dma_addr_t fw_ddb_dma; - struct iscsi_cls_session *cls_sess; - struct iscsi_session *sess; - struct iscsi_cls_conn *cls_conn; - struct iscsi_endpoint *ep; - uint16_t cmds_max = 32, tmo = 0; - uint32_t initial_cmdsn = 0; - struct list_head list_st, list_nt; /* List of sendtargets */ - struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp; - int fw_idx_size; - unsigned long wtime; - struct qla_ddb_index *nt_ddb_idx; - - if (!test_bit(AF_LINK_UP, &ha->flags)) { - set_bit(AF_BUILD_DDB_LIST, &ha->flags); - ha->is_reset = is_reset; - return; - } - max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : - MAX_DEV_DB_ENTRIES; + uint16_t conn_id = 0; fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, &fw_ddb_dma); if (fw_ddb_entry == NULL) { DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); - goto exit_ddb_list; + goto exit_st_list; } - INIT_LIST_HEAD(&list_st); - INIT_LIST_HEAD(&list_nt); + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; fw_idx_size = sizeof(struct qla_ddb_index); for (idx = 0; idx < max_ddbs; idx = next_idx) { - ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, - fw_ddb_dma, NULL, - &next_idx, &state, &conn_err, - NULL, &conn_id); + ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, fw_ddb_dma, + NULL, &next_idx, &state, + &conn_err, NULL, &conn_id); if (ret == QLA_ERROR) break; - if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS) - goto continue_next_st; - /* Check if ST, add to the list_st */ if (strlen((char *) fw_ddb_entry->iscsi_name) != 0) goto continue_next_st; @@ -4009,59 +4048,155 @@ void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) st_ddb_idx->fw_ddb_idx = idx; - list_add_tail(&st_ddb_idx->list, &list_st); + list_add_tail(&st_ddb_idx->list, list_st); continue_next_st: if (next_idx == 0) break; } - /* Before issuing conn open mbox, ensure all IPs states are configured - * Note, conn open fails if IPs are not configured +exit_st_list: + if (fw_ddb_entry) + dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); +} + +/** + * qla4xxx_remove_failed_ddb - Remove inactive or failed ddb from list + * @ha: pointer to adapter structure + * @list_ddb: List from which failed ddb to be removed + * + * Iterate over the list of DDBs and find and remove DDBs that are either in + * no connection active state or failed state + **/ +static void qla4xxx_remove_failed_ddb(struct scsi_qla_host *ha, + struct list_head *list_ddb) +{ + struct qla_ddb_index *ddb_idx, *ddb_idx_tmp; + uint32_t next_idx = 0; + uint32_t state = 0, conn_err = 0; + int ret; + + list_for_each_entry_safe(ddb_idx, ddb_idx_tmp, list_ddb, list) { + ret = qla4xxx_get_fwddb_entry(ha, ddb_idx->fw_ddb_idx, + NULL, 0, NULL, &next_idx, &state, + &conn_err, NULL, NULL); + if (ret == QLA_ERROR) + continue; + + if (state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED) { + list_del_init(&ddb_idx->list); + vfree(ddb_idx); + } + } +} + +static int qla4xxx_sess_conn_setup(struct scsi_qla_host *ha, + struct dev_db_entry *fw_ddb_entry, + int is_reset) +{ + struct iscsi_cls_session *cls_sess; + struct iscsi_session *sess; + struct iscsi_cls_conn *cls_conn; + struct iscsi_endpoint *ep; + uint16_t cmds_max = 32; + uint16_t conn_id = 0; + uint32_t initial_cmdsn = 0; + int ret = QLA_SUCCESS; + + struct ddb_entry *ddb_entry = NULL; + + /* Create session object, with INVALID_ENTRY, + * the targer_id would get set when we issue the login */ - qla4xxx_wait_for_ip_configuration(ha); + cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, ha->host, + cmds_max, sizeof(struct ddb_entry), + sizeof(struct ql4_task_data), + initial_cmdsn, INVALID_ENTRY); + if (!cls_sess) { + ret = QLA_ERROR; + goto exit_setup; + } - /* Go thru the STs and fire the sendtargets by issuing conn open mbx */ - list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { - qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx); + /* + * so calling module_put function to decrement the + * reference count. + **/ + module_put(qla4xxx_iscsi_transport.owner); + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ddb_entry->sess = cls_sess; + + cls_sess->recovery_tmo = ql4xsess_recovery_tmo; + memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry, + sizeof(struct dev_db_entry)); + + qla4xxx_setup_flash_ddb_entry(ha, ddb_entry); + + cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn), conn_id); + + if (!cls_conn) { + ret = QLA_ERROR; + goto exit_setup; } - /* Wait to ensure all sendtargets are done for min 12 sec wait */ - tmo = ((ha->def_timeout < LOGIN_TOV) ? LOGIN_TOV : ha->def_timeout); - DEBUG2(ql4_printk(KERN_INFO, ha, - "Default time to wait for build ddb %d\n", tmo)); + ddb_entry->conn = cls_conn; - wtime = jiffies + (HZ * tmo); - do { - list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, - list) { - ret = qla4xxx_get_fwddb_entry(ha, - st_ddb_idx->fw_ddb_idx, - NULL, 0, NULL, &next_idx, - &state, &conn_err, NULL, - NULL); - if (ret == QLA_ERROR) - continue; + /* Setup ep, for displaying attributes in sysfs */ + ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry); + if (ep) { + ep->conn = cls_conn; + cls_conn->ep = ep; + } else { + DEBUG2(ql4_printk(KERN_ERR, ha, "Unable to get ep\n")); + ret = QLA_ERROR; + goto exit_setup; + } - if (state == DDB_DS_NO_CONNECTION_ACTIVE || - state == DDB_DS_SESSION_FAILED) { - list_del_init(&st_ddb_idx->list); - vfree(st_ddb_idx); - } - } - schedule_timeout_uninterruptible(HZ / 10); - } while (time_after(wtime, jiffies)); + /* Update sess/conn params */ + qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, cls_conn); - /* Free up the sendtargets list */ - list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { - list_del_init(&st_ddb_idx->list); - vfree(st_ddb_idx); + if (is_reset == RESET_ADAPTER) { + iscsi_block_session(cls_sess); + /* Use the relogin path to discover new devices + * by short-circuting the logic of setting + * timer to relogin - instead set the flags + * to initiate login right away. + */ + set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); + set_bit(DF_RELOGIN, &ddb_entry->flags); } +exit_setup: + return ret; +} + +static void qla4xxx_build_nt_list(struct scsi_qla_host *ha, + struct list_head *list_nt, int is_reset) +{ + struct dev_db_entry *fw_ddb_entry; + dma_addr_t fw_ddb_dma; + int max_ddbs; + int fw_idx_size; + int ret; + uint32_t idx = 0, next_idx = 0; + uint32_t state = 0, conn_err = 0; + uint16_t conn_id = 0; + struct qla_ddb_index *nt_ddb_idx; + + fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, + &fw_ddb_dma); + if (fw_ddb_entry == NULL) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); + goto exit_nt_list; + } + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; + fw_idx_size = sizeof(struct qla_ddb_index); + for (idx = 0; idx < max_ddbs; idx = next_idx) { - ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, - fw_ddb_dma, NULL, - &next_idx, &state, &conn_err, - NULL, &conn_id); + ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, fw_ddb_dma, + NULL, &next_idx, &state, + &conn_err, NULL, &conn_id); if (ret == QLA_ERROR) break; @@ -4072,107 +4207,113 @@ continue_next_st: if (strlen((char *) fw_ddb_entry->iscsi_name) == 0) goto continue_next_nt; - if (state == DDB_DS_NO_CONNECTION_ACTIVE || - state == DDB_DS_SESSION_FAILED) { - DEBUG2(ql4_printk(KERN_INFO, ha, - "Adding DDB to session = 0x%x\n", - idx)); - if (is_reset == INIT_ADAPTER) { - nt_ddb_idx = vmalloc(fw_idx_size); - if (!nt_ddb_idx) - break; - - nt_ddb_idx->fw_ddb_idx = idx; - - memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry, - sizeof(struct dev_db_entry)); - - if (qla4xxx_is_flash_ddb_exists(ha, &list_nt, - fw_ddb_entry) == QLA_SUCCESS) { - vfree(nt_ddb_idx); - goto continue_next_nt; - } - list_add_tail(&nt_ddb_idx->list, &list_nt); - } else if (is_reset == RESET_ADAPTER) { - if (qla4xxx_is_session_exists(ha, - fw_ddb_entry) == QLA_SUCCESS) - goto continue_next_nt; - } + if (!(state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED)) + goto continue_next_nt; - /* Create session object, with INVALID_ENTRY, - * the targer_id would get set when we issue the login - */ - cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, - ha->host, cmds_max, - sizeof(struct ddb_entry), - sizeof(struct ql4_task_data), - initial_cmdsn, INVALID_ENTRY); - if (!cls_sess) - goto exit_ddb_list; + DEBUG2(ql4_printk(KERN_INFO, ha, + "Adding DDB to session = 0x%x\n", idx)); + if (is_reset == INIT_ADAPTER) { + nt_ddb_idx = vmalloc(fw_idx_size); + if (!nt_ddb_idx) + break; - /* - * iscsi_session_setup increments the driver reference - * count which wouldn't let the driver to be unloaded. - * so calling module_put function to decrement the - * reference count. - **/ - module_put(qla4xxx_iscsi_transport.owner); - sess = cls_sess->dd_data; - ddb_entry = sess->dd_data; - ddb_entry->sess = cls_sess; + nt_ddb_idx->fw_ddb_idx = idx; - cls_sess->recovery_tmo = ql4xsess_recovery_tmo; - memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry, + memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry, sizeof(struct dev_db_entry)); - qla4xxx_setup_flash_ddb_entry(ha, ddb_entry); - - cls_conn = iscsi_conn_setup(cls_sess, - sizeof(struct qla_conn), - conn_id); - if (!cls_conn) - goto exit_ddb_list; - - ddb_entry->conn = cls_conn; - - /* Setup ep, for displaying attributes in sysfs */ - ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry); - if (ep) { - ep->conn = cls_conn; - cls_conn->ep = ep; - } else { - DEBUG2(ql4_printk(KERN_ERR, ha, - "Unable to get ep\n")); - } - - /* Update sess/conn params */ - qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, - cls_conn); - - if (is_reset == RESET_ADAPTER) { - iscsi_block_session(cls_sess); - /* Use the relogin path to discover new devices - * by short-circuting the logic of setting - * timer to relogin - instead set the flags - * to initiate login right away. - */ - set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); - set_bit(DF_RELOGIN, &ddb_entry->flags); + if (qla4xxx_is_flash_ddb_exists(ha, list_nt, + fw_ddb_entry) == QLA_SUCCESS) { + vfree(nt_ddb_idx); + goto continue_next_nt; } + list_add_tail(&nt_ddb_idx->list, list_nt); + } else if (is_reset == RESET_ADAPTER) { + if (qla4xxx_is_session_exists(ha, fw_ddb_entry) == + QLA_SUCCESS) + goto continue_next_nt; } + + ret = qla4xxx_sess_conn_setup(ha, fw_ddb_entry, is_reset); + if (ret == QLA_ERROR) + goto exit_nt_list; + continue_next_nt: if (next_idx == 0) break; } -exit_ddb_list: - qla4xxx_free_nt_list(&list_nt); + +exit_nt_list: if (fw_ddb_entry) dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); +} + +/** + * qla4xxx_build_ddb_list - Build ddb list and setup sessions + * @ha: pointer to adapter structure + * @is_reset: Is this init path or reset path + * + * Create a list of sendtargets (st) from firmware DDBs, issue send targets + * using connection open, then create the list of normal targets (nt) + * from firmware DDBs. Based on the list of nt setup session and connection + * objects. + **/ +void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) +{ + uint16_t tmo = 0; + struct list_head list_st, list_nt; + struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp; + unsigned long wtime; + + if (!test_bit(AF_LINK_UP, &ha->flags)) { + set_bit(AF_BUILD_DDB_LIST, &ha->flags); + ha->is_reset = is_reset; + return; + } + + INIT_LIST_HEAD(&list_st); + INIT_LIST_HEAD(&list_nt); + + qla4xxx_build_st_list(ha, &list_st); + + /* Before issuing conn open mbox, ensure all IPs states are configured + * Note, conn open fails if IPs are not configured + */ + qla4xxx_wait_for_ip_configuration(ha); + + /* Go thru the STs and fire the sendtargets by issuing conn open mbx */ + list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { + qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx); + } + + /* Wait to ensure all sendtargets are done for min 12 sec wait */ + tmo = ((ha->def_timeout > LOGIN_TOV) && + (ha->def_timeout < LOGIN_TOV * 10) ? + ha->def_timeout : LOGIN_TOV); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Default time to wait for build ddb %d\n", tmo)); + + wtime = jiffies + (HZ * tmo); + do { + if (list_empty(&list_st)) + break; + + qla4xxx_remove_failed_ddb(ha, &list_st); + schedule_timeout_uninterruptible(HZ / 10); + } while (time_after(wtime, jiffies)); + + /* Free up the sendtargets list */ + qla4xxx_free_ddb_list(&list_st); + + qla4xxx_build_nt_list(ha, &list_nt, is_reset); + + qla4xxx_free_ddb_list(&list_nt); qla4xxx_free_ddb_index(ha); } - /** * qla4xxx_probe_adapter - callback function to probe HBA * @pdev: pointer to pci_dev structure diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 26a3fa34a33c..133989b3a9f4 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k10" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k12" diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index f85cfa6c47b5..b2c95dbe9d65 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1316,15 +1316,10 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost, } if (scsi_target_is_busy(starget)) { - if (list_empty(&sdev->starved_entry)) - list_add_tail(&sdev->starved_entry, - &shost->starved_list); + list_move_tail(&sdev->starved_entry, &shost->starved_list); return 0; } - /* We're OK to process the command, so we can't be starved */ - if (!list_empty(&sdev->starved_entry)) - list_del_init(&sdev->starved_entry); return 1; } diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 1b214910b714..f59d4a05ecd7 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3048,7 +3048,8 @@ fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) spin_lock_irqsave(shost->host_lock, flags); rport->flags &= ~(FC_RPORT_FAST_FAIL_TIMEDOUT | - FC_RPORT_DEVLOSS_PENDING); + FC_RPORT_DEVLOSS_PENDING | + FC_RPORT_DEVLOSS_CALLBK_DONE); spin_unlock_irqrestore(shost->host_lock, flags); /* ensure any stgt delete functions are done */ diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 02d99982a74d..eacd46bb36b9 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2368,16 +2368,15 @@ static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer, size_t count, loff_t *off) { - int num; - char buff[11]; + int err; + unsigned long num; if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) return -EACCES; - num = (count < 10) ? count : 10; - if (copy_from_user(buff, buffer, num)) - return -EFAULT; - buff[num] = '\0'; - sg_allow_dio = simple_strtoul(buff, NULL, 10) ? 1 : 0; + err = kstrtoul_from_user(buffer, count, 0, &num); + if (err) + return err; + sg_allow_dio = num ? 1 : 0; return count; } @@ -2390,17 +2389,15 @@ static ssize_t sg_proc_write_dressz(struct file *filp, const char __user *buffer, size_t count, loff_t *off) { - int num; + int err; unsigned long k = ULONG_MAX; - char buff[11]; if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) return -EACCES; - num = (count < 10) ? count : 10; - if (copy_from_user(buff, buffer, num)) - return -EFAULT; - buff[num] = '\0'; - k = simple_strtoul(buff, NULL, 10); + + err = kstrtoul_from_user(buffer, count, 0, &k); + if (err) + return err; if (k <= 1048576) { /* limit "big buff" to 1 MB */ sg_big_buff = k; return count; diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index b4543f575f46..36d1ed7817eb 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -839,6 +839,10 @@ static void sym53c8xx_slave_destroy(struct scsi_device *sdev) struct sym_lcb *lp = sym_lp(tp, sdev->lun); unsigned long flags; + /* if slave_alloc returned before allocating a sym_lcb, return */ + if (!lp) + return; + spin_lock_irqsave(np->s.host->host_lock, flags); if (lp->busy_itlq || lp->busy_itl) { |