diff options
author | Keerthy <j-keerthy@ti.com> | 2018-08-16 10:39:00 +0530 |
---|---|---|
committer | Alexandre Belloni <alexandre.belloni@bootlin.com> | 2018-08-27 22:51:57 +0200 |
commit | 09058eab4b4f77b721572da5291532e751b63931 (patch) | |
tree | 503b50f54bb57344272ff7fc14bb718f000d027a /drivers/rtc/rtc-omap.c | |
parent | 0438002ac52637cef5f5734bab56d8d8750e1f37 (diff) | |
download | linux-09058eab4b4f77b721572da5291532e751b63931.tar.bz2 |
rtc: omap: Cut down the shutdown time from 2 seconds to 1 sec
Cut down the shutdown time from 2 seconds to 1 sec. In case of roll
over try again.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Diffstat (limited to 'drivers/rtc/rtc-omap.c')
-rw-r--r-- | drivers/rtc/rtc-omap.c | 25 |
1 files changed, 15 insertions, 10 deletions
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 44ff4cc62a61..320b4a520eb3 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -421,12 +421,6 @@ static struct omap_rtc *omap_rtc_power_off_rtc; * The RTC can be used to control an external PMIC via the pmic_power_en pin, * which can be configured to transition to OFF on ALARM2 events. * - * Notes: - * The two-second alarm offset is the shortest offset possible as the alarm - * registers must be set before the next timer update and the offset - * calculation is too heavy for everything to be done within a single access - * period (~15 us). - * * Called with local interrupts disabled. */ static void omap_rtc_power_off(void) @@ -434,6 +428,7 @@ static void omap_rtc_power_off(void) struct omap_rtc *rtc = omap_rtc_power_off_rtc; struct rtc_time tm; unsigned long now; + int seconds; u32 val; rtc->type->unlock(rtc); @@ -441,11 +436,13 @@ static void omap_rtc_power_off(void) val = rtc_readl(rtc, OMAP_RTC_PMIC_REG); rtc_writel(rtc, OMAP_RTC_PMIC_REG, val | OMAP_RTC_PMIC_POWER_EN_EN); - /* set alarm two seconds from now */ +again: + /* set alarm one second from now */ omap_rtc_read_time_raw(rtc, &tm); + seconds = tm.tm_sec; bcd2tm(&tm); rtc_tm_to_time(&tm, &now); - rtc_time_to_tm(now + 2, &tm); + rtc_time_to_tm(now + 1, &tm); if (tm2bcd(&tm) < 0) { dev_err(&rtc->rtc->dev, "power off failed\n"); @@ -470,14 +467,22 @@ static void omap_rtc_power_off(void) val = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG); rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG, val | OMAP_RTC_INTERRUPTS_IT_ALARM2); + + /* Retry in case roll over happened before alarm was armed. */ + if (rtc_read(rtc, OMAP_RTC_SECONDS_REG) != seconds) { + val = rtc_read(rtc, OMAP_RTC_STATUS_REG); + if (!(val & OMAP_RTC_STATUS_ALARM2)) + goto again; + } + rtc->type->lock(rtc); /* - * Wait for alarm to trigger (within two seconds) and external PMIC to + * Wait for alarm to trigger (within one second) and external PMIC to * power off the system. Add a 500 ms margin for external latencies * (e.g. debounce circuits). */ - mdelay(2500); + mdelay(1500); } static const struct rtc_class_ops omap_rtc_ops = { |