diff options
author | Manu Gautam <mgautam@codeaurora.org> | 2018-01-16 16:27:08 +0530 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2018-03-08 13:56:16 +0530 |
commit | efb05a50c956b4ccd09c8401eed53bf3894d4026 (patch) | |
tree | 2ceab68d6a5c11068acc0fb3bd4185d2843fddf9 /drivers/phy | |
parent | 8587b220f05e4f09e6b2b7c0c078b9ee7f8cfd9e (diff) | |
download | linux-efb05a50c956b4ccd09c8401eed53bf3894d4026.tar.bz2 |
phy: qcom-qmp: Add support for QMP V3 USB3 PHY
QMP V3 USB3 PHY is a DisplayPort (DP) and USB combo PHY
with dual RX/TX lanes to support type-c. There is a
separate block DP_COM for configuration related to type-c
or DP. Add support for dp_com region and secondary rx/tx
lanes initialization.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.c | 223 |
1 files changed, 220 insertions, 3 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 2a1117b1abeb..55b83974b531 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -47,6 +47,21 @@ /* QPHY_COM_PCS_READY_STATUS bit */ #define PCS_READY BIT(0) +/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */ +/* DP PHY soft reset */ +#define SW_DPPHY_RESET BIT(0) +/* mux to select DP PHY reset control, 0:HW control, 1: software reset */ +#define SW_DPPHY_RESET_MUX BIT(1) +/* USB3 PHY soft reset */ +#define SW_USB3PHY_RESET BIT(2) +/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */ +#define SW_USB3PHY_RESET_MUX BIT(3) + +/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */ +#define USB3_MODE BIT(0) /* enables USB3 mode */ +#define DP_MODE BIT(1) /* enables DP mode */ + + #define PHY_INIT_COMPLETE_TIMEOUT 1000 #define POWER_DOWN_DELAY_US_MIN 10 #define POWER_DOWN_DELAY_US_MAX 11 @@ -122,6 +137,12 @@ static const unsigned int usb3phy_regs_layout[] = { [QPHY_PCS_READY_STATUS] = 0x17c, }; +static const unsigned int qmp_v3_usb3phy_regs_layout[] = { + [QPHY_SW_RESET] = 0x00, + [QPHY_START_CTRL] = 0x08, + [QPHY_PCS_READY_STATUS] = 0x174, +}; + static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), @@ -350,6 +371,112 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3), }; +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = { + /* FLL settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), + + /* Lock Det settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), +}; + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { /* phy-type - PCIE/UFS/USB */ @@ -394,6 +521,12 @@ struct qmp_phy_cfg { /* power_down delay in usec */ int pwrdn_delay_min; int pwrdn_delay_max; + + /* true, if PHY has a separate DP_COM control block */ + bool has_phy_dp_com_ctrl; + /* Register offset of secondary tx/rx lanes for USB DP combo PHY */ + unsigned int tx_b_lane_offset; + unsigned int rx_b_lane_offset; }; /** @@ -424,6 +557,7 @@ struct qmp_phy { * * @dev: device * @serdes: iomapped memory space for phy's serdes + * @dp_com: iomapped memory space for phy's dp_com control block * * @clks: array of clocks required by phy * @resets: array of resets required by phy @@ -437,6 +571,7 @@ struct qmp_phy { struct qcom_qmp { struct device *dev; void __iomem *serdes; + void __iomem *dp_com; struct clk_bulk_data *clks; struct reset_control **resets; @@ -478,6 +613,10 @@ static const char * const msm8996_phy_clk_l[] = { "aux", "cfg_ahb", "ref", }; +static const char * const qmp_v3_phy_clk_l[] = { + "aux", "cfg_ahb", "ref", "com_aux", +}; + /* list of resets */ static const char * const msm8996_pciephy_reset_l[] = { "phy", "common", "cfg", @@ -584,6 +723,38 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .pwrdn_delay_max = 1005, /* us */ }; +static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = qmp_v3_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), + .tx_tbl = qmp_v3_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl), + .rx_tbl = qmp_v3_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl), + .pcs_tbl = qmp_v3_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl), + .clk_list = qmp_v3_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = msm8996_phy_vreg_l, + .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .regs = qmp_v3_usb3phy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + .mask_pcs_ready = PHYSTATUS, + + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, + + .has_phy_dp_com_ctrl = true, + .tx_b_lane_offset = 0x400, + .rx_b_lane_offset = 0x400, +}; + static void qcom_qmp_phy_configure(void __iomem *base, const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], @@ -620,6 +791,7 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; void __iomem *serdes = qmp->serdes; + void __iomem *dp_com = qmp->dp_com; int ret, i; mutex_lock(&qmp->phy_mutex); @@ -663,6 +835,23 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], SW_PWRDN); + if (cfg->has_phy_dp_com_ctrl) { + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL, + SW_PWRDN); + /* override hardware control for reset of qmp phy */ + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL, + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL, + USB3_MODE | DP_MODE); + + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */ + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL, + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + } + /* Serdes configuration */ qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl, cfg->serdes_tbl_num); @@ -746,6 +935,7 @@ static int qcom_qmp_phy_init(struct phy *phy) void __iomem *tx = qphy->tx; void __iomem *rx = qphy->rx; void __iomem *pcs = qphy->pcs; + void __iomem *dp_com = qmp->dp_com; void __iomem *status; unsigned int mask, val; int ret; @@ -767,7 +957,16 @@ static int qcom_qmp_phy_init(struct phy *phy) /* Tx, Rx, and PCS configurations */ qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); + /* Configuration for other LANE for USB-DP combo PHY */ + if (cfg->has_phy_dp_com_ctrl) + qcom_qmp_phy_configure(tx + cfg->tx_b_lane_offset, cfg->regs, + cfg->tx_tbl, cfg->tx_tbl_num); + qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); + if (cfg->has_phy_dp_com_ctrl) + qcom_qmp_phy_configure(rx + cfg->rx_b_lane_offset, cfg->regs, + cfg->rx_tbl, cfg->rx_tbl_num); + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); /* @@ -781,6 +980,8 @@ static int qcom_qmp_phy_init(struct phy *phy) /* Pull PHY out of reset state */ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (cfg->has_phy_dp_com_ctrl) + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); /* start SerDes and Phy-Coding-Sublayer */ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); @@ -1031,6 +1232,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,ipq8074-qmp-pcie-phy", .data = &ipq8074_pciephy_cfg, + }, { + .compatible = "qcom,qmp-v3-usb3-phy", + .data = &qmp_v3_usb3phy_cfg, }, { }, }; @@ -1054,6 +1258,11 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) qmp->dev = dev; dev_set_drvdata(dev, qmp); + /* Get the specific init parameters of QMP phy */ + qmp->cfg = of_device_get_match_data(dev); + if (!qmp->cfg) + return -EINVAL; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) @@ -1062,10 +1271,18 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) /* per PHY serdes; usually located at base address */ qmp->serdes = base; - mutex_init(&qmp->phy_mutex); + /* per PHY dp_com; if PHY has dp_com control block */ + if (qmp->cfg->has_phy_dp_com_ctrl) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "dp_com"); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); - /* Get the specific init parameters of QMP phy */ - qmp->cfg = of_device_get_match_data(dev); + qmp->dp_com = base; + } + + mutex_init(&qmp->phy_mutex); ret = qcom_qmp_phy_clk_init(dev); if (ret) |