pcmcia: Convert dev_printk to dev_<level>

Reduce object size a little by using dev_<level>
calls instead of dev_printk(KERN_<LEVEL>.

Other miscellanea:

o Coalesce formats
o Realign arguments
o Use pr_cont instead of naked printk
  reorder test to use "%s\n"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 12 insertions, 17 deletions

diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 5292db69c426..8007bfda720a 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -177,8 +177,8 @@ int pcmcia_register_socket(struct pcmcia_socket *socket)
 
 	wait_for_completion(&socket->thread_done);
 	if (!socket->thread) {
-		dev_printk(KERN_WARNING, &socket->dev,
-			   "PCMCIA: warning: socket thread did not start\n");
+		dev_warn(&socket->dev,
+			 "PCMCIA: warning: socket thread did not start\n");
 		return -EIO;
 	}
 
@@ -275,7 +275,7 @@ static int socket_reset(struct pcmcia_socket *skt)
 		msleep(unreset_check * 10);
 	}
 
-	dev_printk(KERN_ERR, &skt->dev, "time out after reset.\n");
+	dev_err(&skt->dev, "time out after reset\n");
 	return -ETIMEDOUT;
 }
 
@@ -325,8 +325,8 @@ static void socket_shutdown(struct pcmcia_socket *s)
 
 	s->ops->get_status(s, &status);
 	if (status & SS_POWERON) {
-		dev_printk(KERN_ERR, &s->dev,
-			   "*** DANGER *** unable to remove socket power\n");
+		dev_err(&s->dev,
+			"*** DANGER *** unable to remove socket power\n");
 	}
 
 	s->state &= ~SOCKET_INUSE;
@@ -356,15 +356,13 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 	}
 
 	if (status & SS_PENDING) {
-		dev_printk(KERN_ERR, &skt->dev,
-			   "voltage interrogation timed out.\n");
+		dev_err(&skt->dev, "voltage interrogation timed out\n");
 		return -ETIMEDOUT;
 	}
 
 	if (status & SS_CARDBUS) {
 		if (!(skt->features & SS_CAP_CARDBUS)) {
-			dev_printk(KERN_ERR, &skt->dev,
-				"cardbus cards are not supported.\n");
+			dev_err(&skt->dev, "cardbus cards are not supported\n");
 			return -EINVAL;
 		}
 		skt->state |= SOCKET_CARDBUS;
@@ -379,7 +377,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 	else if (!(status & SS_XVCARD))
 		skt->socket.Vcc = skt->socket.Vpp = 50;
 	else {
-		dev_printk(KERN_ERR, &skt->dev, "unsupported voltage key.\n");
+		dev_err(&skt->dev, "unsupported voltage key\n");
 		return -EIO;
 	}
 
@@ -396,7 +394,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 
 	skt->ops->get_status(skt, &status);
 	if (!(status & SS_POWERON)) {
-		dev_printk(KERN_ERR, &skt->dev, "unable to apply power.\n");
+		dev_err(&skt->dev, "unable to apply power\n");
 		return -EIO;
 	}
 
@@ -429,8 +427,7 @@ static int socket_insert(struct pcmcia_socket *skt)
 	if (ret == 0) {
 		skt->state |= SOCKET_PRESENT;
 
-		dev_printk(KERN_NOTICE, &skt->dev,
-			   "pccard: %s card inserted into slot %d\n",
+		dev_notice(&skt->dev, "pccard: %s card inserted into slot %d\n",
 			   (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
 			   skt->sock);
 
@@ -558,8 +555,7 @@ static int socket_resume(struct pcmcia_socket *skt)
 
 static void socket_remove(struct pcmcia_socket *skt)
 {
-	dev_printk(KERN_NOTICE, &skt->dev,
-		   "pccard: card ejected from slot %d\n", skt->sock);
+	dev_notice(&skt->dev, "pccard: card ejected from slot %d\n", skt->sock);
 	socket_shutdown(skt);
 }
 
@@ -605,8 +601,7 @@ static int pccardd(void *__skt)
 	/* register with the device core */
 	ret = device_register(&skt->dev);
 	if (ret) {
-		dev_printk(KERN_WARNING, &skt->dev,
-			   "PCMCIA: unable to register socket\n");
+		dev_warn(&skt->dev, "PCMCIA: unable to register socket\n");
 		skt->thread = NULL;
 		complete(&skt->thread_done);
 		return 0;