diff options
| author | Bjorn Helgaas <bhelgaas@google.com> | 2013-11-14 11:28:18 -0700 |
|---|---|---|
| committer | Bjorn Helgaas <bhelgaas@google.com> | 2013-11-14 11:28:18 -0700 |
| commit | f7625980f5820edd1a73536e1a03bcbc1f889fec (patch) | |
| tree | 145e76f39b3e1d08d3e7a48a0993c0cd59088cc6 /drivers/pci/probe.c | |
| parent | 4fbf888accb39af423f271111d44e8186f053723 (diff) | |
| download | linux-f7625980f5820edd1a73536e1a03bcbc1f889fec.tar.bz2 | |
PCI: Fix whitespace, capitalization, and spelling errors
Fix whitespace, capitalization, and spelling errors. No functional change.
I know "busses" is not an error, but "buses" was more common, so I used it
consistently.
Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus())
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/pci/probe.c')
| -rw-r--r-- | drivers/pci/probe.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 5e14f5a51357..38e403dddf6e 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -582,7 +582,7 @@ static enum pci_bus_speed agp_speed(int agp3, int agpstat) index = 1; else goto out; - + if (agp3) { index += 2; if (index == 5) @@ -789,7 +789,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) } /* Disable MasterAbortMode during probing to avoid reporting - of bus errors (in some architectures) */ + of bus errors (in some architectures) */ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); @@ -1005,7 +1005,7 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev) * pci_setup_device - fill in class and map information of a device * @dev: the device structure to fill * - * Initialize the device structure with information about the device's + * Initialize the device structure with information about the device's * vendor,class,memory and IO-space addresses,IRQ lines etc. * Called at initialisation of the PCI subsystem and by CardBus services. * Returns 0 on success and negative if unknown type of device (not normal, @@ -1111,7 +1111,7 @@ int pci_setup_device(struct pci_dev *dev) goto bad; /* The PCI-to-PCI bridge spec requires that subtractive decoding (i.e. transparent) bridge must have programming - interface code of 0x01. */ + interface code of 0x01. */ pci_read_irq(dev); dev->transparent = ((dev->class & 0xff) == 1); pci_read_bases(dev, 2, PCI_ROM_ADDRESS1); @@ -1570,7 +1570,7 @@ static void pcie_write_mrrs(struct pci_dev *dev) * subsequent read will verify if the value is acceptable or not. * If the MRRS value provided is not acceptable (e.g., too large), * shrink the value until it is acceptable to the HW. - */ + */ while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) { rc = pcie_set_readrq(dev, mrrs); if (!rc) |