summaryrefslogtreecommitdiffstats
path: root/drivers/net/ks8851.c
diff options
context:
space:
mode:
authorLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-30 22:57:33 -0300
committerLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-31 11:26:23 -0300
commit25985edcedea6396277003854657b5f3cb31a628 (patch)
treef026e810210a2ee7290caeb737c23cb6472b7c38 /drivers/net/ks8851.c
parent6aba74f2791287ec407e0f92487a725a25908067 (diff)
downloadlinux-25985edcedea6396277003854657b5f3cb31a628.tar.bz2
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Diffstat (limited to 'drivers/net/ks8851.c')
-rw-r--r--drivers/net/ks8851.c8
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 0fa4a9887ba2..bcd9ba68c9f2 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -141,7 +141,7 @@ static int msg_enable;
*
* All these calls issue SPI transactions to access the chip's registers. They
* all require that the necessary lock is held to prevent accesses when the
- * chip is busy transfering packet data (RX/TX FIFO accesses).
+ * chip is busy transferring packet data (RX/TX FIFO accesses).
*/
/**
@@ -483,7 +483,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
*
* This form of operation would require us to hold the SPI bus'
* chipselect low during the entie transaction to avoid any
- * reset to the data stream comming from the chip.
+ * reset to the data stream coming from the chip.
*/
for (; rxfc != 0; rxfc--) {
@@ -634,7 +634,7 @@ static void ks8851_irq_work(struct work_struct *work)
/**
* calc_txlen - calculate size of message to send packet
- * @len: Lenght of data
+ * @len: Length of data
*
* Returns the size of the TXFIFO message needed to send
* this packet.
@@ -1472,7 +1472,7 @@ static int ks8851_phy_reg(int reg)
* @reg: The register to read.
*
* This call reads data from the PHY register specified in @reg. Since the
- * device does not support all the MII registers, the non-existant values
+ * device does not support all the MII registers, the non-existent values
* are always returned as zero.
*
* We return zero for unsupported registers as the MII code does not check