diff options
| author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2019-01-21 13:52:06 +0900 |
|---|---|---|
| committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2019-02-05 16:56:10 +0100 |
| commit | d4ea6ed022de33b326cce5ea60a4a80ca0a96750 (patch) | |
| tree | f883a026b2ee794508de3fe75faaecfaa33986ee /drivers/mtd | |
| parent | 3175e121832fc768e2431e91128e5053ac7061f3 (diff) | |
| download | linux-d4ea6ed022de33b326cce5ea60a4a80ca0a96750.tar.bz2 | |
mtd: rawnand: denali: remove ->erase hook
Commit f9ebd1bb4103 ("mtd: rawnand: Deprecate ->erase()") discouraged
the use of this hook, so I am happy to follow the suggestion.
Although the Denali IP provides a special MAP10 command for erasing,
using it would not buy us much. The Denali IP actually works with the
generic erasing by single_erase() + ->cmdfunc hook (nand_command_lp)
+ ->cmd_ctrl hook (denali_cmd_ctrl).
This method is also deprecated, but denali_erase() can go away
irrespective of ->exec_op conversion.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/raw/denali.c | 21 |
1 files changed, 0 insertions, 21 deletions
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index eebac35304c6..87fff94bf91e 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -37,9 +37,6 @@ #define DENALI_MAP11_ADDR ((DENALI_MAP11) | 1) /* address cycle */ #define DENALI_MAP11_DATA ((DENALI_MAP11) | 2) /* data cycle */ -/* MAP10 commands */ -#define DENALI_ERASE 0x01 - #define DENALI_BANK(denali) ((denali)->active_bank << 24) #define DENALI_INVALID_BANK -1 @@ -903,23 +900,6 @@ static int denali_waitfunc(struct nand_chip *chip) return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL; } -static int denali_erase(struct nand_chip *chip, int page) -{ - struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip)); - uint32_t irq_status; - - denali_reset_irq(denali); - - denali->host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page, - DENALI_ERASE); - - /* wait for erase to complete or failure to occur */ - irq_status = denali_wait_for_irq(denali, - INTR__ERASE_COMP | INTR__ERASE_FAIL); - - return irq_status & INTR__ERASE_COMP ? 0 : -EIO; -} - static int denali_setup_data_interface(struct nand_chip *chip, int chipnr, const struct nand_data_interface *conf) { @@ -1244,7 +1224,6 @@ static int denali_attach_chip(struct nand_chip *chip) chip->ecc.write_page_raw = denali_write_page_raw; chip->ecc.read_oob = denali_read_oob; chip->ecc.write_oob = denali_write_oob; - chip->legacy.erase = denali_erase; ret = denali_multidev_fixup(denali); if (ret) |