Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (226 commits)
  mtd: tests: annotate as DANGEROUS in Kconfig
  mtd: tests: don't use mtd0 as a default
  mtd: clean up usage of MTD_DOCPROBE_ADDRESS
  jffs2: add compr=lzo and compr=zlib options
  jffs2: implement mount option parsing and compression overriding
  mtd: nand: initialize ops.mode
  mtd: provide an alias for the redboot module name
  mtd: m25p80: don't probe device which has status of 'disabled'
  mtd: nand_h1900 never worked
  mtd: Add DiskOnChip G3 support
  mtd: m25p80: add EON flash EN25Q32B into spi flash id table
  mtd: mark block device queue as non-rotational
  mtd: r852: make r852_pm_ops static
  mtd: m25p80: add support for at25df321a spi data flash
  mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks
  mtd: nand: switch `check_pattern()' to standard `memcmp()'
  mtd: nand: invalidate cache on unaligned reads
  mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set
  mtd: nand: wait to set BBT version
  mtd: nand: scrub BBT on ECC errors
  ...

Fix up trivial conflicts:
 - arch/arm/mach-at91/board-usb-a9260.c
	Merged into board-usb-a926x.c
 - drivers/mtd/maps/lantiq-flash.c
	add_mtd_partitions -> mtd_device_register vs changed to use
	mtd_device_parse_register.

1 files changed, 18 insertions, 11 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index dbfa0f7fb464..cce7b70824c3 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -83,16 +83,9 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR
           scratch register here to enable this feature. On Intel Moorestown
           boards, the scratch register is at 0xFF108018.
 
-config MTD_NAND_EDB7312
-	tristate "Support for Cirrus Logic EBD7312 evaluation board"
-	depends on ARCH_EDB7312
-	help
-	  This enables the driver for the Cirrus Logic EBD7312 evaluation
-	  board to access the onboard NAND Flash.
-
 config MTD_NAND_H1900
 	tristate "iPAQ H1900 flash"
-	depends on ARCH_PXA
+	depends on ARCH_PXA && BROKEN
 	help
 	  This enables the driver for the iPAQ h1900 flash.
 
@@ -116,10 +109,11 @@ config MTD_NAND_AMS_DELTA
 	  Support for NAND flash on Amstrad E3 (Delta).
 
 config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP2 and OMAP3"
-	depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
+	tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
+	depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
 	help
-          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+          Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
+	  platforms.
 
 config MTD_NAND_IDS
 	tristate
@@ -423,6 +417,19 @@ config MTD_NAND_NANDSIM
 	  The simulator may simulate various NAND flash chips for the
 	  MTD nand layer.
 
+config MTD_NAND_GPMI_NAND
+        bool "GPMI NAND Flash Controller driver"
+        depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+	select MTD_PARTITIONS
+	select MTD_CMDLINE_PARTS
+        help
+	 Enables NAND Flash support for IMX23 or IMX28.
+	 The GPMI controller is very powerful, with the help of BCH
+	 module, it can do the hardware ECC. The GPMI supports several
+	 NAND flashs at the same time. The GPMI may conflicts with other
+	 block, such as SD card. So pay attention to it when you enable
+	 the GPMI.
+
 config MTD_NAND_PLATFORM
 	tristate "Support for generic platform NAND driver"
 	help