diff options
author | Arnd Bergmann <arnd@arndb.de> | 2021-10-11 12:07:56 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2021-10-11 12:07:57 +0200 |
commit | 16667625dae695631d98d848769e481b08de7185 (patch) | |
tree | 29a89cc6c04cc1229430803fe7ab89e21aa6cb83 /drivers/memory | |
parent | f47794f5fa703ac92464709131b86dd9e7567acd (diff) | |
parent | d611d7ea120bbef45e836565dfa2ddc85a168c16 (diff) | |
download | linux-16667625dae695631d98d848769e481b08de7185.tar.bz2 |
Merge tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.16
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
* tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER
memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module
memory: samsung: describe drivers in KConfig
memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlash
memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode
dt-bindings: rpc: renesas-rpc-if: Add support for the R8A779A0 RPC-IF
Link: https://lore.kernel.org/r/20211010175836.13302-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/memory')
-rw-r--r-- | drivers/memory/Kconfig | 5 | ||||
-rw-r--r-- | drivers/memory/fsl_ifc.c | 13 | ||||
-rw-r--r-- | drivers/memory/renesas-rpc-if.c | 159 | ||||
-rw-r--r-- | drivers/memory/samsung/Kconfig | 13 |
4 files changed, 139 insertions, 51 deletions
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 72c0df129d5c..30bff6cb1b8d 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -55,8 +55,8 @@ config ATMEL_EBI SRAMs, ATA devices, etc. config BRCMSTB_DPFE - bool "Broadcom STB DPFE driver" if COMPILE_TEST - default y if ARCH_BRCMSTB + tristate "Broadcom STB DPFE driver" + default ARCH_BRCMSTB depends on ARCH_BRCMSTB || COMPILE_TEST help This driver provides access to the DPFE interface of Broadcom @@ -210,6 +210,7 @@ config RENESAS_RPCIF tristate "Renesas RPC-IF driver" depends on ARCH_RENESAS || COMPILE_TEST select REGMAP_MMIO + select RESET_CONTROLLER help This supports Renesas R-Car Gen3 or RZ/G2 RPC-IF which provides either SPI host or HyperFlash. You'll have to select individual diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c index d062c2f8250f..75a8c38df939 100644 --- a/drivers/memory/fsl_ifc.c +++ b/drivers/memory/fsl_ifc.c @@ -263,7 +263,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev) ret = fsl_ifc_ctrl_init(fsl_ifc_ctrl_dev); if (ret < 0) - goto err; + goto err_unmap_nandirq; init_waitqueue_head(&fsl_ifc_ctrl_dev->nand_wait); @@ -272,7 +272,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev) if (ret != 0) { dev_err(&dev->dev, "failed to install irq (%d)\n", fsl_ifc_ctrl_dev->irq); - goto err_irq; + goto err_unmap_nandirq; } if (fsl_ifc_ctrl_dev->nand_irq) { @@ -281,17 +281,16 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev) if (ret != 0) { dev_err(&dev->dev, "failed to install irq (%d)\n", fsl_ifc_ctrl_dev->nand_irq); - goto err_nandirq; + goto err_free_irq; } } return 0; -err_nandirq: - free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev); - irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq); -err_irq: +err_free_irq: free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev); +err_unmap_nandirq: + irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq); irq_dispose_mapping(fsl_ifc_ctrl_dev->irq); err: iounmap(fsl_ifc_ctrl_dev->gregs); diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c index 45eed659b0c6..7435baad0007 100644 --- a/drivers/memory/renesas-rpc-if.c +++ b/drivers/memory/renesas-rpc-if.c @@ -160,10 +160,61 @@ static const struct regmap_access_table rpcif_volatile_table = { .n_yes_ranges = ARRAY_SIZE(rpcif_volatile_ranges), }; + +/* + * Custom accessor functions to ensure SMRDR0 and SMWDR0 are always accessed + * with proper width. Requires SMENR_SPIDE to be correctly set before! + */ +static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + struct rpcif *rpc = context; + + if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) { + u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF); + + if (spide == 0x8) { + *val = readb(rpc->base + reg); + return 0; + } else if (spide == 0xC) { + *val = readw(rpc->base + reg); + return 0; + } else if (spide != 0xF) { + return -EILSEQ; + } + } + + *val = readl(rpc->base + reg); + return 0; +} + +static int rpcif_reg_write(void *context, unsigned int reg, unsigned int val) +{ + struct rpcif *rpc = context; + + if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) { + u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF); + + if (spide == 0x8) { + writeb(val, rpc->base + reg); + return 0; + } else if (spide == 0xC) { + writew(val, rpc->base + reg); + return 0; + } else if (spide != 0xF) { + return -EILSEQ; + } + } + + writel(val, rpc->base + reg); + return 0; +} + static const struct regmap_config rpcif_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, + .reg_read = rpcif_reg_read, + .reg_write = rpcif_reg_write, .fast_io = true, .max_register = RPCIF_PHYINT, .volatile_table = &rpcif_volatile_table, @@ -173,17 +224,15 @@ int rpcif_sw_init(struct rpcif *rpc, struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct resource *res; - void __iomem *base; rpc->dev = dev; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); - base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); + rpc->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(rpc->base)) + return PTR_ERR(rpc->base); - rpc->regmap = devm_regmap_init_mmio(&pdev->dev, base, - &rpcif_regmap_config); + rpc->regmap = devm_regmap_init(&pdev->dev, NULL, rpc, &rpcif_regmap_config); if (IS_ERR(rpc->regmap)) { dev_err(&pdev->dev, "failed to init regmap for rpcif, error %ld\n", @@ -354,20 +403,16 @@ void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs, nbytes = op->data.nbytes; rpc->xferlen = nbytes; - rpc->enable |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes)) | - RPCIF_SMENR_SPIDB(rpcif_bit_size(op->data.buswidth)); + rpc->enable |= RPCIF_SMENR_SPIDB(rpcif_bit_size(op->data.buswidth)); } } EXPORT_SYMBOL(rpcif_prepare); int rpcif_manual_xfer(struct rpcif *rpc) { - u32 smenr, smcr, pos = 0, max = 4; + u32 smenr, smcr, pos = 0, max = rpc->bus_size == 2 ? 8 : 4; int ret = 0; - if (rpc->bus_size == 2) - max = 8; - pm_runtime_get_sync(rpc->dev); regmap_update_bits(rpc->regmap, RPCIF_PHYCNT, @@ -378,37 +423,36 @@ int rpcif_manual_xfer(struct rpcif *rpc) regmap_write(rpc->regmap, RPCIF_SMOPR, rpc->option); regmap_write(rpc->regmap, RPCIF_SMDMCR, rpc->dummy); regmap_write(rpc->regmap, RPCIF_SMDRENR, rpc->ddr); + regmap_write(rpc->regmap, RPCIF_SMADR, rpc->smadr); smenr = rpc->enable; switch (rpc->dir) { case RPCIF_DATA_OUT: while (pos < rpc->xferlen) { - u32 nbytes = rpc->xferlen - pos; - u32 data[2]; + u32 bytes_left = rpc->xferlen - pos; + u32 nbytes, data[2]; smcr = rpc->smcr | RPCIF_SMCR_SPIE; - if (nbytes > max) { - nbytes = max; + + /* nbytes may only be 1, 2, 4, or 8 */ + nbytes = bytes_left >= max ? max : (1 << ilog2(bytes_left)); + if (bytes_left > nbytes) smcr |= RPCIF_SMCR_SSLKP; - } + + smenr |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes)); + regmap_write(rpc->regmap, RPCIF_SMENR, smenr); memcpy(data, rpc->buffer + pos, nbytes); - if (nbytes > 4) { + if (nbytes == 8) { regmap_write(rpc->regmap, RPCIF_SMWDR1, data[0]); regmap_write(rpc->regmap, RPCIF_SMWDR0, data[1]); - } else if (nbytes > 2) { + } else { regmap_write(rpc->regmap, RPCIF_SMWDR0, data[0]); - } else { - regmap_write(rpc->regmap, RPCIF_SMWDR0, - data[0] << 16); } - regmap_write(rpc->regmap, RPCIF_SMADR, - rpc->smadr + pos); - regmap_write(rpc->regmap, RPCIF_SMENR, smenr); regmap_write(rpc->regmap, RPCIF_SMCR, smcr); ret = wait_msg_xfer_end(rpc); if (ret) @@ -448,14 +492,16 @@ int rpcif_manual_xfer(struct rpcif *rpc) break; } while (pos < rpc->xferlen) { - u32 nbytes = rpc->xferlen - pos; - u32 data[2]; + u32 bytes_left = rpc->xferlen - pos; + u32 nbytes, data[2]; - if (nbytes > max) - nbytes = max; + /* nbytes may only be 1, 2, 4, or 8 */ + nbytes = bytes_left >= max ? max : (1 << ilog2(bytes_left)); regmap_write(rpc->regmap, RPCIF_SMADR, rpc->smadr + pos); + smenr &= ~RPCIF_SMENR_SPIDE(0xF); + smenr |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes)); regmap_write(rpc->regmap, RPCIF_SMENR, smenr); regmap_write(rpc->regmap, RPCIF_SMCR, rpc->smcr | RPCIF_SMCR_SPIE); @@ -463,18 +509,14 @@ int rpcif_manual_xfer(struct rpcif *rpc) if (ret) goto err_out; - if (nbytes > 4) { + if (nbytes == 8) { regmap_read(rpc->regmap, RPCIF_SMRDR1, &data[0]); regmap_read(rpc->regmap, RPCIF_SMRDR0, &data[1]); - } else if (nbytes > 2) { - regmap_read(rpc->regmap, RPCIF_SMRDR0, - &data[0]); - } else { + } else { regmap_read(rpc->regmap, RPCIF_SMRDR0, &data[0]); - data[0] >>= 16; } memcpy(rpc->buffer + pos, data, nbytes); @@ -502,6 +544,48 @@ err_out: } EXPORT_SYMBOL(rpcif_manual_xfer); +static void memcpy_fromio_readw(void *to, + const void __iomem *from, + size_t count) +{ + const int maxw = (IS_ENABLED(CONFIG_64BIT)) ? 8 : 4; + u8 buf[2]; + + if (count && ((unsigned long)from & 1)) { + *(u16 *)buf = __raw_readw((void __iomem *)((unsigned long)from & ~1)); + *(u8 *)to = buf[1]; + from++; + to++; + count--; + } + while (count >= 2 && !IS_ALIGNED((unsigned long)from, maxw)) { + *(u16 *)to = __raw_readw(from); + from += 2; + to += 2; + count -= 2; + } + while (count >= maxw) { +#ifdef CONFIG_64BIT + *(u64 *)to = __raw_readq(from); +#else + *(u32 *)to = __raw_readl(from); +#endif + from += maxw; + to += maxw; + count -= maxw; + } + while (count >= 2) { + *(u16 *)to = __raw_readw(from); + from += 2; + to += 2; + count -= 2; + } + if (count) { + *(u16 *)buf = __raw_readw(from); + *(u8 *)to = buf[0]; + } +} + ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf) { loff_t from = offs & (RPCIF_DIRMAP_SIZE - 1); @@ -523,7 +607,10 @@ ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf) regmap_write(rpc->regmap, RPCIF_DRDMCR, rpc->dummy); regmap_write(rpc->regmap, RPCIF_DRDRENR, rpc->ddr); - memcpy_fromio(buf, rpc->dirmap + from, len); + if (rpc->bus_size == 2) + memcpy_fromio_readw(buf, rpc->dirmap + from, len); + else + memcpy_fromio(buf, rpc->dirmap + from, len); pm_runtime_put(rpc->dev); diff --git a/drivers/memory/samsung/Kconfig b/drivers/memory/samsung/Kconfig index 8e240f078afc..7fb70f573031 100644 --- a/drivers/memory/samsung/Kconfig +++ b/drivers/memory/samsung/Kconfig @@ -14,11 +14,12 @@ config EXYNOS5422_DMC depends on DEVFREQ_GOV_SIMPLE_ONDEMAND depends on (PM_DEVFREQ && PM_DEVFREQ_EVENT) help - This adds driver for Exynos5422 DMC (Dynamic Memory Controller). - The driver provides support for Dynamic Voltage and Frequency Scaling in - DMC and DRAM. It also supports changing timings of DRAM running with - different frequency. The timings are calculated based on DT memory - information. + This adds driver for Samsung Exynos5422 SoC DMC (Dynamic Memory + Controller). The driver provides support for Dynamic Voltage and + Frequency Scaling in DMC and DRAM. It also supports changing timings + of DRAM running with different frequency. The timings are calculated + based on DT memory information. + If unsure, say Y on devices with Samsung Exynos SoCs. config EXYNOS_SROM bool "Exynos SROM controller driver" if COMPILE_TEST @@ -29,6 +30,6 @@ config EXYNOS_SROM during suspend. If however appropriate device tree configuration is provided, the driver enables support for external memory or external devices. - If unsure, say Y on devices with Samsung Exynos SocS. + If unsure, say Y on devices with Samsung Exynos SoCs. endif |