[media] media: st-rc: Add ST remote control driver

This patch adds support to ST RC driver, which is basically a IR/UHF
receiver and transmitter. This IP (IRB) is common across all the ST
parts for settop box platforms. IRB is embedded in ST COMMS IP block.
It supports both Rx & Tx functionality.
This driver adds only Rx functionality via LIRC codec.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

3 files changed, 406 insertions, 0 deletions

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 11e84bcc23a1..904f11367c29 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -322,4 +322,14 @@ config IR_GPIO_CIR
 	   To compile this driver as a module, choose M here: the module will
 	   be called gpio-ir-recv.
 
+config RC_ST
+	tristate "ST remote control receiver"
+	depends on ARCH_STI && RC_CORE
+	help
+	 Say Y here if you want support for ST remote control driver
+	 which allows both IR and UHF RX.
+	 The driver passes raw pulse and space information to the LIRC decoder.
+
+	 If you're not sure, select N here.
+
 endif #RC_DEVICES
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 56bacf07b361..f4eb32c0a455 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
 obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
 obj-$(CONFIG_IR_IGUANA) += iguanair.o
 obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
+obj-$(CONFIG_RC_ST) += st_rc.o
diff --git a/drivers/media/rc/st_rc.c b/drivers/media/rc/st_rc.c
new file mode 100644
index 000000000000..65120c2d47ad
--- /dev/null
+++ b/drivers/media/rc/st_rc.c
@@ -0,0 +1,395 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <media/rc-core.h>
+#include <linux/pinctrl/consumer.h>
+
+struct st_rc_device {
+	struct device			*dev;
+	int				irq;
+	int				irq_wake;
+	struct clk			*sys_clock;
+	void				*base;	/* Register base address */
+	void				*rx_base;/* RX Register base address */
+	struct rc_dev			*rdev;
+	bool				overclocking;
+	int				sample_mult;
+	int				sample_div;
+	bool				rxuhfmode;
+};
+
+/* Registers */
+#define IRB_SAMPLE_RATE_COMM	0x64	/* sample freq divisor*/
+#define IRB_CLOCK_SEL		0x70	/* clock select       */
+#define IRB_CLOCK_SEL_STATUS	0x74	/* clock status       */
+/* IRB IR/UHF receiver registers */
+#define IRB_RX_ON               0x40	/* pulse time capture */
+#define IRB_RX_SYS              0X44	/* sym period capture */
+#define IRB_RX_INT_EN           0x48	/* IRQ enable (R/W)   */
+#define IRB_RX_INT_STATUS       0x4c	/* IRQ status (R/W)   */
+#define IRB_RX_EN               0x50	/* Receive enable     */
+#define IRB_MAX_SYM_PERIOD      0x54	/* max sym value      */
+#define IRB_RX_INT_CLEAR        0x58	/* overrun status     */
+#define IRB_RX_STATUS           0x6c	/* receive status     */
+#define IRB_RX_NOISE_SUPPR      0x5c	/* noise suppression  */
+#define IRB_RX_POLARITY_INV     0x68	/* polarity inverter  */
+
+/**
+ * IRQ set: Enable full FIFO                 1  -> bit  3;
+ *          Enable overrun IRQ               1  -> bit  2;
+ *          Enable last symbol IRQ           1  -> bit  1:
+ *          Enable RX interrupt              1  -> bit  0;
+ */
+#define IRB_RX_INTS		0x0f
+#define IRB_RX_OVERRUN_INT	0x04
+ /* maximum symbol period (microsecs),timeout to detect end of symbol train */
+#define MAX_SYMB_TIME		0x5000
+#define IRB_SAMPLE_FREQ		10000000
+#define	IRB_FIFO_NOT_EMPTY	0xff00
+#define IRB_OVERFLOW		0x4
+#define IRB_TIMEOUT		0xffff
+#define IR_ST_NAME "st-rc"
+
+static void st_rc_send_lirc_timeout(struct rc_dev *rdev)
+{
+	DEFINE_IR_RAW_EVENT(ev);
+	ev.timeout = true;
+	ir_raw_event_store(rdev, &ev);
+}
+
+/**
+ * RX graphical example to better understand the difference between ST IR block
+ * output and standard definition used by LIRC (and most of the world!)
+ *
+ *           mark                                     mark
+ *      |-IRB_RX_ON-|                            |-IRB_RX_ON-|
+ *      ___  ___  ___                            ___  ___  ___             _
+ *      | |  | |  | |                            | |  | |  | |             |
+ *      | |  | |  | |         space 0            | |  | |  | |   space 1   |
+ * _____| |__| |__| |____________________________| |__| |__| |_____________|
+ *
+ *      |--------------- IRB_RX_SYS -------------|------ IRB_RX_SYS -------|
+ *
+ *      |------------- encoding bit 0 -----------|---- encoding bit 1 -----|
+ *
+ * ST hardware returns mark (IRB_RX_ON) and total symbol time (IRB_RX_SYS), so
+ * convert to standard mark/space we have to calculate space=(IRB_RX_SYS-mark)
+ * The mark time represents the amount of time the carrier (usually 36-40kHz)
+ * is detected.The above examples shows Pulse Width Modulation encoding where
+ * bit 0 is represented by space>mark.
+ */
+
+static irqreturn_t st_rc_rx_interrupt(int irq, void *data)
+{
+	unsigned int symbol, mark = 0;
+	struct st_rc_device *dev = data;
+	int last_symbol = 0;
+	u32 status;
+	DEFINE_IR_RAW_EVENT(ev);
+
+	if (dev->irq_wake)
+		pm_wakeup_event(dev->dev, 0);
+
+	status  = readl(dev->rx_base + IRB_RX_STATUS);
+
+	while (status & (IRB_FIFO_NOT_EMPTY | IRB_OVERFLOW)) {
+		u32 int_status = readl(dev->rx_base + IRB_RX_INT_STATUS);
+		if (unlikely(int_status & IRB_RX_OVERRUN_INT)) {
+			/* discard the entire collection in case of errors!  */
+			ir_raw_event_reset(dev->rdev);
+			dev_info(dev->dev, "IR RX overrun\n");
+			writel(IRB_RX_OVERRUN_INT,
+					dev->rx_base + IRB_RX_INT_CLEAR);
+			continue;
+		}
+
+		symbol = readl(dev->rx_base + IRB_RX_SYS);
+		mark = readl(dev->rx_base + IRB_RX_ON);
+
+		if (symbol == IRB_TIMEOUT)
+			last_symbol = 1;
+
+		 /* Ignore any noise */
+		if ((mark > 2) && (symbol > 1)) {
+			symbol -= mark;
+			if (dev->overclocking) { /* adjustments to timings */
+				symbol *= dev->sample_mult;
+				symbol /= dev->sample_div;
+				mark *= dev->sample_mult;
+				mark /= dev->sample_div;
+			}
+
+			ev.duration = US_TO_NS(mark);
+			ev.pulse = true;
+			ir_raw_event_store(dev->rdev, &ev);
+
+			if (!last_symbol) {
+				ev.duration = US_TO_NS(symbol);
+				ev.pulse = false;
+				ir_raw_event_store(dev->rdev, &ev);
+			} else  {
+				st_rc_send_lirc_timeout(dev->rdev);
+			}
+
+		}
+		last_symbol = 0;
+		status  = readl(dev->rx_base + IRB_RX_STATUS);
+	}
+
+	writel(IRB_RX_INTS, dev->rx_base + IRB_RX_INT_CLEAR);
+
+	/* Empty software fifo */
+	ir_raw_event_handle(dev->rdev);
+	return IRQ_HANDLED;
+}
+
+static void st_rc_hardware_init(struct st_rc_device *dev)
+{
+	int baseclock, freqdiff;
+	unsigned int rx_max_symbol_per = MAX_SYMB_TIME;
+	unsigned int rx_sampling_freq_div;
+
+	clk_prepare_enable(dev->sys_clock);
+	baseclock = clk_get_rate(dev->sys_clock);
+
+	/* IRB input pins are inverted internally from high to low. */
+	writel(1, dev->rx_base + IRB_RX_POLARITY_INV);
+
+	rx_sampling_freq_div = baseclock / IRB_SAMPLE_FREQ;
+	writel(rx_sampling_freq_div, dev->base + IRB_SAMPLE_RATE_COMM);
+
+	freqdiff = baseclock - (rx_sampling_freq_div * IRB_SAMPLE_FREQ);
+	if (freqdiff) { /* over clocking, workout the adjustment factors */
+		dev->overclocking = true;
+		dev->sample_mult = 1000;
+		dev->sample_div = baseclock / (10000 * rx_sampling_freq_div);
+		rx_max_symbol_per = (rx_max_symbol_per * 1000)/dev->sample_div;
+	}
+
+	writel(rx_max_symbol_per, dev->rx_base + IRB_MAX_SYM_PERIOD);
+}
+
+static int st_rc_remove(struct platform_device *pdev)
+{
+	struct st_rc_device *rc_dev = platform_get_drvdata(pdev);
+	clk_disable_unprepare(rc_dev->sys_clock);
+	rc_unregister_device(rc_dev->rdev);
+	return 0;
+}
+
+static int st_rc_open(struct rc_dev *rdev)
+{
+	struct st_rc_device *dev = rdev->priv;
+	unsigned long flags;
+	local_irq_save(flags);
+	/* enable interrupts and receiver */
+	writel(IRB_RX_INTS, dev->rx_base + IRB_RX_INT_EN);
+	writel(0x01, dev->rx_base + IRB_RX_EN);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static void st_rc_close(struct rc_dev *rdev)
+{
+	struct st_rc_device *dev = rdev->priv;
+	/* disable interrupts and receiver */
+	writel(0x00, dev->rx_base + IRB_RX_EN);
+	writel(0x00, dev->rx_base + IRB_RX_INT_EN);
+}
+
+static int st_rc_probe(struct platform_device *pdev)
+{
+	int ret = -EINVAL;
+	struct rc_dev *rdev;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct st_rc_device *rc_dev;
+	struct device_node *np = pdev->dev.of_node;
+	const char *rx_mode;
+
+	rc_dev = devm_kzalloc(dev, sizeof(struct st_rc_device), GFP_KERNEL);
+
+	if (!rc_dev)
+		return -ENOMEM;
+
+	rdev = rc_allocate_device();
+
+	if (!rdev)
+		return -ENOMEM;
+
+	if (np && !of_property_read_string(np, "rx-mode", &rx_mode)) {
+
+		if (!strcmp(rx_mode, "uhf")) {
+			rc_dev->rxuhfmode = true;
+		} else if (!strcmp(rx_mode, "infrared")) {
+			rc_dev->rxuhfmode = false;
+		} else {
+			dev_err(dev, "Unsupported rx mode [%s]\n", rx_mode);
+			goto err;
+		}
+
+	} else {
+		goto err;
+	}
+
+	rc_dev->sys_clock = devm_clk_get(dev, NULL);
+	if (IS_ERR(rc_dev->sys_clock)) {
+		dev_err(dev, "System clock not found\n");
+		ret = PTR_ERR(rc_dev->sys_clock);
+		goto err;
+	}
+
+	rc_dev->irq = platform_get_irq(pdev, 0);
+	if (rc_dev->irq < 0) {
+		ret = rc_dev->irq;
+		goto err;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	rc_dev->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(rc_dev->base)) {
+		ret = PTR_ERR(rc_dev->base);
+		goto err;
+	}
+
+	if (rc_dev->rxuhfmode)
+		rc_dev->rx_base = rc_dev->base + 0x40;
+	else
+		rc_dev->rx_base = rc_dev->base;
+
+	rc_dev->dev = dev;
+	platform_set_drvdata(pdev, rc_dev);
+	st_rc_hardware_init(rc_dev);
+
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = RC_BIT_ALL;
+	/* rx sampling rate is 10Mhz */
+	rdev->rx_resolution = 100;
+	rdev->timeout = US_TO_NS(MAX_SYMB_TIME);
+	rdev->priv = rc_dev;
+	rdev->open = st_rc_open;
+	rdev->close = st_rc_close;
+	rdev->driver_name = IR_ST_NAME;
+	rdev->map_name = RC_MAP_LIRC;
+	rdev->input_name = "ST Remote Control Receiver";
+
+	/* enable wake via this device */
+	device_set_wakeup_capable(dev, true);
+	device_set_wakeup_enable(dev, true);
+
+	ret = rc_register_device(rdev);
+	if (ret < 0)
+		goto clkerr;
+
+	rc_dev->rdev = rdev;
+	if (devm_request_irq(dev, rc_dev->irq, st_rc_rx_interrupt,
+			IRQF_NO_SUSPEND, IR_ST_NAME, rc_dev) < 0) {
+		dev_err(dev, "IRQ %d register failed\n", rc_dev->irq);
+		ret = -EINVAL;
+		goto rcerr;
+	}
+
+	/**
+	 * for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW
+	 * lircd expects a long space first before a signal train to sync.
+	 */
+	st_rc_send_lirc_timeout(rdev);
+
+	dev_info(dev, "setup in %s mode\n", rc_dev->rxuhfmode ? "UHF" : "IR");
+
+	return ret;
+rcerr:
+	rc_unregister_device(rdev);
+	rdev = NULL;
+clkerr:
+	clk_disable_unprepare(rc_dev->sys_clock);
+err:
+	rc_free_device(rdev);
+	dev_err(dev, "Unable to register device (%d)\n", ret);
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int st_rc_suspend(struct device *dev)
+{
+	struct st_rc_device *rc_dev = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (!enable_irq_wake(rc_dev->irq))
+			rc_dev->irq_wake = 1;
+		else
+			return -EINVAL;
+	} else {
+		pinctrl_pm_select_sleep_state(dev);
+		writel(0x00, rc_dev->rx_base + IRB_RX_EN);
+		writel(0x00, rc_dev->rx_base + IRB_RX_INT_EN);
+		clk_disable_unprepare(rc_dev->sys_clock);
+	}
+
+	return 0;
+}
+
+static int st_rc_resume(struct device *dev)
+{
+	struct st_rc_device *rc_dev = dev_get_drvdata(dev);
+	struct rc_dev	*rdev = rc_dev->rdev;
+
+	if (rc_dev->irq_wake) {
+		disable_irq_wake(rc_dev->irq);
+		rc_dev->irq_wake = 0;
+	} else {
+		pinctrl_pm_select_default_state(dev);
+		st_rc_hardware_init(rc_dev);
+		if (rdev->users) {
+			writel(IRB_RX_INTS, rc_dev->rx_base + IRB_RX_INT_EN);
+			writel(0x01, rc_dev->rx_base + IRB_RX_EN);
+		}
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(st_rc_pm_ops, st_rc_suspend, st_rc_resume);
+#endif
+
+#ifdef CONFIG_OF
+static struct of_device_id st_rc_match[] = {
+	{ .compatible = "st,comms-irb", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, st_rc_match);
+#endif
+
+static struct platform_driver st_rc_driver = {
+	.driver = {
+		.name = IR_ST_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(st_rc_match),
+#ifdef CONFIG_PM
+		.pm     = &st_rc_pm_ops,
+#endif
+	},
+	.probe = st_rc_probe,
+	.remove = st_rc_remove,
+};
+
+module_platform_driver(st_rc_driver);
+
+MODULE_DESCRIPTION("RC Transceiver driver for STMicroelectronics platforms");
+MODULE_AUTHOR("STMicroelectronics (R&D) Ltd");
+MODULE_LICENSE("GPL");