[ARM] pxa/corgi: use leds-gpio for led driving and drop leds-corgi

Now as the scoop pins are covered by the generic gpio API,
we can use leds-gpio driver instead of special leds-corgi

Drop leds-corgi.c and remove the declaration of now un-referenced
corgiscoop_device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 0 insertions, 132 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9556262dda5a..27c60daa73fe 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -24,13 +24,6 @@ config LEDS_ATMEL_PWM
 	  This option enables support for LEDs driven using outputs
 	  of the dedicated PWM controller found on newer Atmel SOCs.
 
-config LEDS_CORGI
-	tristate "LED Support for the Sharp SL-C7x0 series"
-	depends on LEDS_CLASS && PXA_SHARP_C7xx
-	help
-	  This option enables support for the LEDs on Sharp Zaurus
-	  SL-C7x0 series (C700, C750, C760, C860).
-
 config LEDS_LOCOMO
 	tristate "LED Support for Locomo device"
 	depends on LEDS_CLASS && SHARP_LOCOMO
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index ff7982b44565..556f8d2e7bba 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
 
 # LED Platform Drivers
 obj-$(CONFIG_LEDS_ATMEL_PWM)		+= leds-atmel-pwm.o
-obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
 obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
 obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
deleted file mode 100644
index bc2dcd89f635..000000000000
--- a/drivers/leds/leds-corgi.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * LED Triggers Core
- *
- * Copyright 2005-2006 Openedhand Ltd.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <asm/hardware/scoop.h>
-
-static void corgiled_amber_set(struct led_classdev *led_cdev,
-			       enum led_brightness value)
-{
-	if (value)
-		GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
-	else
-		GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
-}
-
-static void corgiled_green_set(struct led_classdev *led_cdev,
-			       enum led_brightness value)
-{
-	if (value)
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
-	else
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
-}
-
-static struct led_classdev corgi_amber_led = {
-	.name			= "corgi:amber:charge",
-	.default_trigger	= "sharpsl-charge",
-	.brightness_set		= corgiled_amber_set,
-};
-
-static struct led_classdev corgi_green_led = {
-	.name			= "corgi:green:mail",
-	.default_trigger	= "nand-disk",
-	.brightness_set		= corgiled_green_set,
-};
-
-#ifdef CONFIG_PM
-static int corgiled_suspend(struct platform_device *dev, pm_message_t state)
-{
-#ifdef CONFIG_LEDS_TRIGGERS
-	if (corgi_amber_led.trigger &&
-	    strcmp(corgi_amber_led.trigger->name, "sharpsl-charge"))
-#endif
-		led_classdev_suspend(&corgi_amber_led);
-	led_classdev_suspend(&corgi_green_led);
-	return 0;
-}
-
-static int corgiled_resume(struct platform_device *dev)
-{
-	led_classdev_resume(&corgi_amber_led);
-	led_classdev_resume(&corgi_green_led);
-	return 0;
-}
-#endif
-
-static int corgiled_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = led_classdev_register(&pdev->dev, &corgi_amber_led);
-	if (ret < 0)
-		return ret;
-
-	ret = led_classdev_register(&pdev->dev, &corgi_green_led);
-	if (ret < 0)
-		led_classdev_unregister(&corgi_amber_led);
-
-	return ret;
-}
-
-static int corgiled_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&corgi_amber_led);
-	led_classdev_unregister(&corgi_green_led);
-	return 0;
-}
-
-static struct platform_driver corgiled_driver = {
-	.probe		= corgiled_probe,
-	.remove		= corgiled_remove,
-#ifdef CONFIG_PM
-	.suspend	= corgiled_suspend,
-	.resume		= corgiled_resume,
-#endif
-	.driver		= {
-		.name		= "corgi-led",
-		.owner		= THIS_MODULE,
-	},
-};
-
-static int __init corgiled_init(void)
-{
-	return platform_driver_register(&corgiled_driver);
-}
-
-static void __exit corgiled_exit(void)
-{
-	platform_driver_unregister(&corgiled_driver);
-}
-
-module_init(corgiled_init);
-module_exit(corgiled_exit);
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Corgi LED driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:corgi-led");