Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - three new touchscreen drivers: EETI EXC3000, HiDeep, and Samsung
   S6SY761

 - the timer API conversion (setup_timer() -> timer_setup())

 - a few drivers swiytched to using managed API for creating custom
   device attributes

 - other assorted fixed and cleanups.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
  Input: gamecon - mark expected switch fall-throughs
  Input: sidewinder - mark expected switch fall-throughs
  Input: spaceball - mark expected switch fall-throughs
  Input: uinput - unlock on allocation failure in ioctl
  Input: add support for the Samsung S6SY761 touchscreen
  Input: add support for HiDeep touchscreen
  Input: st1232 - remove obsolete platform device support
  Input: convert autorepeat timer to use timer_setup()
  media: ttpci: remove autorepeat handling and use timer_setup
  Input: cyttsp4 - avoid overflows when calculating memory sizes
  Input: mxs-lradc - remove redundant assignment to pointer input
  Input: add I2C attached EETI EXC3000 multi touch driver
  Input: goodix - support gt1151 touchpanel
  Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs
  Input: hil_mlc - convert to using timer_setup()
  Input: hp_sdc - convert to using timer_setup()
  Input: touchsceen - convert timers to use timer_setup()
  Input: keyboard - convert timers to use timer_setup()
  Input: uinput - fold header into the driver proper
  Input: uinput - remove uinput_allocate_device()
  ...

4 files changed, 118 insertions, 117 deletions

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 850b00e3ad8e..579b899add26 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1587,10 +1587,10 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
 	return PSMOUSE_GOOD_DATA;
 }
 
-static void alps_flush_packet(unsigned long data)
+static void alps_flush_packet(struct timer_list *t)
 {
-	struct psmouse *psmouse = (struct psmouse *)data;
-	struct alps_data *priv = psmouse->private;
+	struct alps_data *priv = from_timer(priv, t, timer);
+	struct psmouse *psmouse = priv->psmouse;
 
 	serio_pause_rx(psmouse->ps2dev.serio);
 
@@ -2702,7 +2702,7 @@ static int alps_set_protocol(struct psmouse *psmouse,
 {
 	psmouse->private = priv;
 
-	setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
+	timer_setup(&priv->timer, alps_flush_packet, 0);
 
 	priv->proto_version = protocol->version;
 	priv->byte0 = protocol->byte0;
diff --git a/drivers/input/mouse/byd.c b/drivers/input/mouse/byd.c
index b64b81599f7e..f2aabf7f906f 100644
--- a/drivers/input/mouse/byd.c
+++ b/drivers/input/mouse/byd.c
@@ -227,6 +227,7 @@
 
 struct byd_data {
 	struct timer_list timer;
+	struct psmouse *psmouse;
 	s32 abs_x;
 	s32 abs_y;
 	typeof(jiffies) last_touch_time;
@@ -251,10 +252,10 @@ static void byd_report_input(struct psmouse *psmouse)
 	input_sync(dev);
 }
 
-static void byd_clear_touch(unsigned long data)
+static void byd_clear_touch(struct timer_list *t)
 {
-	struct psmouse *psmouse = (struct psmouse *)data;
-	struct byd_data *priv = psmouse->private;
+	struct byd_data *priv = from_timer(priv, t, timer);
+	struct psmouse *psmouse = priv->psmouse;
 
 	serio_pause_rx(psmouse->ps2dev.serio);
 	priv->touch = false;
@@ -478,7 +479,8 @@ int byd_init(struct psmouse *psmouse)
 	if (!priv)
 		return -ENOMEM;
 
-	setup_timer(&priv->timer, byd_clear_touch, (unsigned long) psmouse);
+	priv->psmouse = psmouse;
+	timer_setup(&priv->timer, byd_clear_touch, 0);
 
 	psmouse->private = priv;
 	psmouse->disconnect = byd_disconnect;
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index d6135900da64..2111a85d0b17 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -26,6 +26,7 @@
 #include <linux/init.h>
 #include <linux/input/mt.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
@@ -1141,10 +1142,13 @@ static int elan_probe(struct i2c_client *client,
 		return error;
 
 	/*
-	 * Systems using device tree should set up interrupt via DTS,
-	 * the rest will use the default falling edge interrupts.
+	 * Platform code (ACPI, DTS) should normally set up interrupt
+	 * for us, but in case it did not let's fall back to using falling
+	 * edge to be compatible with older Chromebooks.
 	 */
-	irqflags = dev->of_node ? 0 : IRQF_TRIGGER_FALLING;
+	irqflags = irq_get_trigger_type(client->irq);
+	if (!irqflags)
+		irqflags = IRQF_TRIGGER_FALLING;
 
 	error = devm_request_threaded_irq(dev, client->irq, NULL, elan_isr,
 					  irqflags | IRQF_ONESHOT,
@@ -1255,7 +1259,6 @@ static const struct acpi_device_id elan_acpi_id[] = {
 	{ "ELAN0602", 0 },
 	{ "ELAN0605", 0 },
 	{ "ELAN0608", 0 },
-	{ "ELAN0605", 0 },
 	{ "ELAN0609", 0 },
 	{ "ELAN060B", 0 },
 	{ "ELAN060C", 0 },
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index ced07391304b..a26d8be6f795 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -2,6 +2,7 @@
  * Driver for simulating a mouse on GPIO lines.
  *
  * Copyright (C) 2007 Atmel Corporation
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,9 +12,35 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/input-polldev.h>
-#include <linux/gpio.h>
-#include <linux/gpio_mouse.h>
-
+#include <linux/gpio/consumer.h>
+#include <linux/property.h>
+#include <linux/of.h>
+
+/**
+ * struct gpio_mouse
+ * @scan_ms: the scan interval in milliseconds.
+ * @up: GPIO line for up value.
+ * @down: GPIO line for down value.
+ * @left: GPIO line for left value.
+ * @right: GPIO line for right value.
+ * @bleft: GPIO line for left button.
+ * @bmiddle: GPIO line for middle button.
+ * @bright: GPIO line for right button.
+ *
+ * This struct must be added to the platform_device in the board code.
+ * It is used by the gpio_mouse driver to setup GPIO lines and to
+ * calculate mouse movement.
+ */
+struct gpio_mouse {
+	u32 scan_ms;
+	struct gpio_desc *up;
+	struct gpio_desc *down;
+	struct gpio_desc *left;
+	struct gpio_desc *right;
+	struct gpio_desc *bleft;
+	struct gpio_desc *bmiddle;
+	struct gpio_desc *bright;
+};
 
 /*
  * Timer function which is run every scan_ms ms when the device is opened.
@@ -21,24 +48,22 @@
  */
 static void gpio_mouse_scan(struct input_polled_dev *dev)
 {
-	struct gpio_mouse_platform_data *gpio = dev->private;
+	struct gpio_mouse *gpio = dev->private;
 	struct input_dev *input = dev->input;
 	int x, y;
 
-	if (gpio->bleft >= 0)
+	if (gpio->bleft)
 		input_report_key(input, BTN_LEFT,
-				gpio_get_value(gpio->bleft) ^ gpio->polarity);
-	if (gpio->bmiddle >= 0)
+				 gpiod_get_value(gpio->bleft));
+	if (gpio->bmiddle)
 		input_report_key(input, BTN_MIDDLE,
-				gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
-	if (gpio->bright >= 0)
+				 gpiod_get_value(gpio->bmiddle));
+	if (gpio->bright)
 		input_report_key(input, BTN_RIGHT,
-				gpio_get_value(gpio->bright) ^ gpio->polarity);
+				 gpiod_get_value(gpio->bright));
 
-	x = (gpio_get_value(gpio->right) ^ gpio->polarity)
-		- (gpio_get_value(gpio->left) ^ gpio->polarity);
-	y = (gpio_get_value(gpio->down) ^ gpio->polarity)
-		- (gpio_get_value(gpio->up) ^ gpio->polarity);
+	x = gpiod_get_value(gpio->right) - gpiod_get_value(gpio->left);
+	y = gpiod_get_value(gpio->down) - gpiod_get_value(gpio->up);
 
 	input_report_rel(input, REL_X, x);
 	input_report_rel(input, REL_Y, y);
@@ -47,65 +72,61 @@ static void gpio_mouse_scan(struct input_polled_dev *dev)
 
 static int gpio_mouse_probe(struct platform_device *pdev)
 {
-	struct gpio_mouse_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	struct gpio_mouse *gmouse;
 	struct input_polled_dev *input_poll;
 	struct input_dev *input;
-	int pin, i;
-	int error;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data\n");
-		error = -ENXIO;
-		goto out;
-	}
-
-	if (pdata->scan_ms < 0) {
-		dev_err(&pdev->dev, "invalid scan time\n");
-		error = -EINVAL;
-		goto out;
-	}
-
-	for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
-		pin = pdata->pins[i];
-
-		if (pin < 0) {
-
-			if (i <= GPIO_MOUSE_PIN_RIGHT) {
-				/* Mouse direction is required. */
-				dev_err(&pdev->dev,
-					"missing GPIO for directions\n");
-				error = -EINVAL;
-				goto out_free_gpios;
-			}
-
-			if (i == GPIO_MOUSE_PIN_BLEFT)
-				dev_dbg(&pdev->dev, "no left button defined\n");
-
-		} else {
-			error = gpio_request(pin, "gpio_mouse");
-			if (error) {
-				dev_err(&pdev->dev, "fail %d pin (%d idx)\n",
-					pin, i);
-				goto out_free_gpios;
-			}
-
-			gpio_direction_input(pin);
-		}
+	int ret;
+
+	gmouse = devm_kzalloc(dev, sizeof(*gmouse), GFP_KERNEL);
+	if (!gmouse)
+		return -ENOMEM;
+
+	/* Assign some default scanning time */
+	ret = device_property_read_u32(dev, "scan-interval-ms",
+				       &gmouse->scan_ms);
+	if (ret || gmouse->scan_ms == 0) {
+		dev_warn(dev, "invalid scan time, set to 50 ms\n");
+		gmouse->scan_ms = 50;
 	}
 
-	input_poll = input_allocate_polled_device();
+	gmouse->up = devm_gpiod_get(dev, "up", GPIOD_IN);
+	if (IS_ERR(gmouse->up))
+		return PTR_ERR(gmouse->up);
+	gmouse->down = devm_gpiod_get(dev, "down", GPIOD_IN);
+	if (IS_ERR(gmouse->down))
+		return PTR_ERR(gmouse->down);
+	gmouse->left = devm_gpiod_get(dev, "left", GPIOD_IN);
+	if (IS_ERR(gmouse->left))
+		return PTR_ERR(gmouse->left);
+	gmouse->right = devm_gpiod_get(dev, "right", GPIOD_IN);
+	if (IS_ERR(gmouse->right))
+		return PTR_ERR(gmouse->right);
+
+	gmouse->bleft = devm_gpiod_get_optional(dev, "button-left", GPIOD_IN);
+	if (IS_ERR(gmouse->bleft))
+		return PTR_ERR(gmouse->bleft);
+	gmouse->bmiddle = devm_gpiod_get_optional(dev, "button-middle",
+						  GPIOD_IN);
+	if (IS_ERR(gmouse->bmiddle))
+		return PTR_ERR(gmouse->bmiddle);
+	gmouse->bright = devm_gpiod_get_optional(dev, "button-right",
+						 GPIOD_IN);
+	if (IS_ERR(gmouse->bright))
+		return PTR_ERR(gmouse->bright);
+
+	input_poll = devm_input_allocate_polled_device(dev);
 	if (!input_poll) {
-		dev_err(&pdev->dev, "not enough memory for input device\n");
-		error = -ENOMEM;
-		goto out_free_gpios;
+		dev_err(dev, "not enough memory for input device\n");
+		return -ENOMEM;
 	}
 
 	platform_set_drvdata(pdev, input_poll);
 
 	/* set input-polldev handlers */
-	input_poll->private = pdata;
+	input_poll->private = gmouse;
 	input_poll->poll = gpio_mouse_scan;
-	input_poll->poll_interval = pdata->scan_ms;
+	input_poll->poll_interval = gmouse->scan_ms;
 
 	input = input_poll->input;
 	input->name = pdev->name;
@@ -114,63 +135,39 @@ static int gpio_mouse_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_REL, REL_X);
 	input_set_capability(input, EV_REL, REL_Y);
-	if (pdata->bleft >= 0)
+	if (gmouse->bleft)
 		input_set_capability(input, EV_KEY, BTN_LEFT);
-	if (pdata->bmiddle >= 0)
+	if (gmouse->bmiddle)
 		input_set_capability(input, EV_KEY, BTN_MIDDLE);
-	if (pdata->bright >= 0)
+	if (gmouse->bright)
 		input_set_capability(input, EV_KEY, BTN_RIGHT);
 
-	error = input_register_polled_device(input_poll);
-	if (error) {
-		dev_err(&pdev->dev, "could not register input device\n");
-		goto out_free_polldev;
+	ret = input_register_polled_device(input_poll);
+	if (ret) {
+		dev_err(dev, "could not register input device\n");
+		return ret;
 	}
 
-	dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
-			pdata->scan_ms,
-			pdata->bleft < 0 ? "" : "left ",
-			pdata->bmiddle < 0 ? "" : "middle ",
-			pdata->bright < 0 ? "" : "right");
+	dev_dbg(dev, "%d ms scan time, buttons: %s%s%s\n",
+		gmouse->scan_ms,
+		gmouse->bleft ? "" : "left ",
+		gmouse->bmiddle ? "" : "middle ",
+		gmouse->bright ? "" : "right");
 
 	return 0;
-
- out_free_polldev:
-	input_free_polled_device(input_poll);
-
- out_free_gpios:
-	while (--i >= 0) {
-		pin = pdata->pins[i];
-		if (pin)
-			gpio_free(pin);
-	}
- out:
-	return error;
 }
 
-static int gpio_mouse_remove(struct platform_device *pdev)
-{
-	struct input_polled_dev *input = platform_get_drvdata(pdev);
-	struct gpio_mouse_platform_data *pdata = input->private;
-	int pin, i;
-
-	input_unregister_polled_device(input);
-	input_free_polled_device(input);
-
-	for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
-		pin = pdata->pins[i];
-		if (pin >= 0)
-			gpio_free(pin);
-	}
-
-	return 0;
-}
+static const struct of_device_id gpio_mouse_of_match[] = {
+	{ .compatible = "gpio-mouse", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, gpio_mouse_of_match);
 
 static struct platform_driver gpio_mouse_device_driver = {
 	.probe		= gpio_mouse_probe,
-	.remove		= gpio_mouse_remove,
 	.driver		= {
 		.name	= "gpio_mouse",
+		.of_match_table = gpio_mouse_of_match,
 	}
 };
 module_platform_driver(gpio_mouse_device_driver);
@@ -179,4 +176,3 @@ MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
 MODULE_DESCRIPTION("GPIO mouse driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
-