Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer updates from Dmitry Torokhov:

 - evdev interface has been adjusted to extend the life of timestamps on
   32 bit systems to the year of 2108

 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
   improve chances of detecting trackpoints on the pass-through port

 - mms114 touchcsreen controller driver has been updated to support
   generic device properties and work with mms152 cntrollers

 - Goodix driver now supports generic touchscreen properties

 - couple of drivers for AVR32 architecture are gone as the architecture
   support has been removed from the kernel

 - gpio-tilt driver has been removed as there are no mainline users and
   the driver itself is using legacy APIs and relies on platform data

 - MODULE_LINECSE/MODULE_VERSION cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: goodix - use generic touchscreen_properties
  Input: mms114 - fix typo in definition
  Input: mms114 - use BIT() macro instead of explicit shifting
  Input: mms114 - replace mdelay with msleep
  Input: mms114 - add support for mms152
  Input: mms114 - drop platform data and use generic APIs
  Input: mms114 - mark as direct input device
  Input: mms114 - do not clobber interrupt trigger
  Input: edt-ft5x06 - fix error handling for factory mode on non-M06
  Input: stmfts - set IRQ_NOAUTOEN to the irq flag
  Input: auo-pixcir-ts - delete an unnecessary return statement
  Input: auo-pixcir-ts - remove custom log for a failed memory allocation
  Input: da9052_tsi - remove unused mutex
  Input: docs - use PROPERTY_ENTRY_U32() directly
  Input: synaptics-rmi4 - log when we create a guest serio port
  Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
  Input: synaptics-rmi4 - do not delete interrupt memory too early
  Input: ad7877 - use managed resource allocations
  Input: stmfts,s6sy671 - add SPDX identifier
  Input: remove atmel-wm97xx touchscreen driver
  ...

8 files changed, 10 insertions, 244 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 9f082a388388..62a1312a7387 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -268,20 +268,6 @@ config INPUT_GPIO_BEEPER
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio-beeper.
 
-config INPUT_GPIO_TILT_POLLED
-	tristate "Polled GPIO tilt switch"
-	depends on GPIOLIB || COMPILE_TEST
-	select INPUT_POLLDEV
-	help
-	  This driver implements support for tilt switches connected
-	  to GPIO pins that are not capable of generating interrupts.
-
-	  The list of gpios to use and the mapping of their states
-	  to specific angles is done via platform data.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called gpio_tilt_polled.
-
 config INPUT_GPIO_DECODER
 	tristate "Polled GPIO Decoder Input driver"
 	depends on GPIOLIB || COMPILE_TEST
@@ -468,7 +454,7 @@ config INPUT_TPS65218_PWRBUTTON
 	tristate "TPS65218 Power button driver"
 	depends on (MFD_TPS65217 || MFD_TPS65218)
 	help
-	  Say Y here if you want to enable power buttong reporting for
+	  Say Y here if you want to enable power button reporting for
 	  TPS65217 and TPS65218 Power Management IC devices.
 
 	  To compile this driver as a module, choose M here. The module will
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 4b6118d313fe..a8f61af865aa 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_INPUT_DRV2665_HAPTICS)	+= drv2665.o
 obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
-obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)	+= gpio_tilt_polled.o
 obj-$(CONFIG_INPUT_GPIO_DECODER)	+= gpio_decoder.o
 obj-$(CONFIG_INPUT_HISI_POWERKEY)	+= hisi_powerkey.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index aad1df04c854..094bddf56755 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -26,7 +26,6 @@
 #include <linux/leds.h>
 
 #define APANEL_NAME	"Fujitsu Application Panel"
-#define APANEL_VERSION	"1.3.1"
 #define APANEL		"apanel"
 
 /* How often we poll keys - msecs */
@@ -345,7 +344,6 @@ module_exit(apanel_cleanup);
 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
 MODULE_DESCRIPTION(APANEL_NAME " driver");
 MODULE_LICENSE("GPL");
-MODULE_VERSION(APANEL_VERSION);
 
 MODULE_ALIAS("dmi:*:svnFUJITSU:pnLifeBook*:pvr*:rvnFUJITSU:*");
 MODULE_ALIAS("dmi:*:svnFUJITSU:pnLifebook*:pvr*:rvnFUJITSU:*");
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index ebf4448b31b9..ded5b84e336d 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -14,10 +14,8 @@
 #include <linux/module.h>
 
 #define DRIVER_DESC    "ATI/Philips USB RF remote driver"
-#define DRIVER_VERSION "0.3"
 
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/input/misc/gpio_tilt_polled.c b/drivers/input/misc/gpio_tilt_polled.c
deleted file mode 100644
index 6e217a45e39a..000000000000
--- a/drivers/input/misc/gpio_tilt_polled.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  Driver for tilt switches connected via GPIO lines
- *  not capable of generating interrupts
- *
- *  Copyright (C) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- *  based on: drivers/input/keyboard/gpio_keys_polled.c
- *
- *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/input-polldev.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/input/gpio_tilt.h>
-
-#define DRV_NAME	"gpio-tilt-polled"
-
-struct gpio_tilt_polled_dev {
-	struct input_polled_dev *poll_dev;
-	struct device *dev;
-	const struct gpio_tilt_platform_data *pdata;
-
-	int last_state;
-
-	int threshold;
-	int count;
-};
-
-static void gpio_tilt_polled_poll(struct input_polled_dev *dev)
-{
-	struct gpio_tilt_polled_dev *tdev = dev->private;
-	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
-	struct input_dev *input = dev->input;
-	struct gpio_tilt_state *tilt_state = NULL;
-	int state, i;
-
-	if (tdev->count < tdev->threshold) {
-		tdev->count++;
-	} else {
-		state = 0;
-		for (i = 0; i < pdata->nr_gpios; i++)
-			state |= (!!gpio_get_value(pdata->gpios[i].gpio) << i);
-
-		if (state != tdev->last_state) {
-			for (i = 0; i < pdata->nr_states; i++)
-				if (pdata->states[i].gpios == state)
-					tilt_state = &pdata->states[i];
-
-			if (tilt_state) {
-				for (i = 0; i < pdata->nr_axes; i++)
-					input_report_abs(input,
-							 pdata->axes[i].axis,
-							 tilt_state->axes[i]);
-
-				input_sync(input);
-			}
-
-			tdev->count = 0;
-			tdev->last_state = state;
-		}
-	}
-}
-
-static void gpio_tilt_polled_open(struct input_polled_dev *dev)
-{
-	struct gpio_tilt_polled_dev *tdev = dev->private;
-	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
-
-	if (pdata->enable)
-		pdata->enable(tdev->dev);
-
-	/* report initial state of the axes */
-	tdev->last_state = -1;
-	tdev->count = tdev->threshold;
-	gpio_tilt_polled_poll(tdev->poll_dev);
-}
-
-static void gpio_tilt_polled_close(struct input_polled_dev *dev)
-{
-	struct gpio_tilt_polled_dev *tdev = dev->private;
-	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
-
-	if (pdata->disable)
-		pdata->disable(tdev->dev);
-}
-
-static int gpio_tilt_polled_probe(struct platform_device *pdev)
-{
-	const struct gpio_tilt_platform_data *pdata =
-			dev_get_platdata(&pdev->dev);
-	struct device *dev = &pdev->dev;
-	struct gpio_tilt_polled_dev *tdev;
-	struct input_polled_dev *poll_dev;
-	struct input_dev *input;
-	int error, i;
-
-	if (!pdata || !pdata->poll_interval)
-		return -EINVAL;
-
-	tdev = kzalloc(sizeof(struct gpio_tilt_polled_dev), GFP_KERNEL);
-	if (!tdev) {
-		dev_err(dev, "no memory for private data\n");
-		return -ENOMEM;
-	}
-
-	error = gpio_request_array(pdata->gpios, pdata->nr_gpios);
-	if (error) {
-		dev_err(dev,
-			"Could not request tilt GPIOs: %d\n", error);
-		goto err_free_tdev;
-	}
-
-	poll_dev = input_allocate_polled_device();
-	if (!poll_dev) {
-		dev_err(dev, "no memory for polled device\n");
-		error = -ENOMEM;
-		goto err_free_gpios;
-	}
-
-	poll_dev->private = tdev;
-	poll_dev->poll = gpio_tilt_polled_poll;
-	poll_dev->poll_interval = pdata->poll_interval;
-	poll_dev->open = gpio_tilt_polled_open;
-	poll_dev->close = gpio_tilt_polled_close;
-
-	input = poll_dev->input;
-
-	input->name = pdev->name;
-	input->phys = DRV_NAME"/input0";
-	input->dev.parent = dev;
-
-	input->id.bustype = BUS_HOST;
-	input->id.vendor = 0x0001;
-	input->id.product = 0x0001;
-	input->id.version = 0x0100;
-
-	__set_bit(EV_ABS, input->evbit);
-	for (i = 0; i < pdata->nr_axes; i++)
-		input_set_abs_params(input, pdata->axes[i].axis,
-				     pdata->axes[i].min, pdata->axes[i].max,
-				     pdata->axes[i].fuzz, pdata->axes[i].flat);
-
-	tdev->threshold = DIV_ROUND_UP(pdata->debounce_interval,
-				       pdata->poll_interval);
-
-	tdev->poll_dev = poll_dev;
-	tdev->dev = dev;
-	tdev->pdata = pdata;
-
-	error = input_register_polled_device(poll_dev);
-	if (error) {
-		dev_err(dev, "unable to register polled device, err=%d\n",
-			error);
-		goto err_free_polldev;
-	}
-
-	platform_set_drvdata(pdev, tdev);
-
-	return 0;
-
-err_free_polldev:
-	input_free_polled_device(poll_dev);
-err_free_gpios:
-	gpio_free_array(pdata->gpios, pdata->nr_gpios);
-err_free_tdev:
-	kfree(tdev);
-
-	return error;
-}
-
-static int gpio_tilt_polled_remove(struct platform_device *pdev)
-{
-	struct gpio_tilt_polled_dev *tdev = platform_get_drvdata(pdev);
-	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
-
-	input_unregister_polled_device(tdev->poll_dev);
-	input_free_polled_device(tdev->poll_dev);
-
-	gpio_free_array(pdata->gpios, pdata->nr_gpios);
-
-	kfree(tdev);
-
-	return 0;
-}
-
-static struct platform_driver gpio_tilt_polled_driver = {
-	.probe	= gpio_tilt_polled_probe,
-	.remove	= gpio_tilt_polled_remove,
-	.driver	= {
-		.name	= DRV_NAME,
-	},
-};
-
-module_platform_driver(gpio_tilt_polled_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
-MODULE_DESCRIPTION("Polled GPIO tilt driver");
-MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 77c47d6325fe..67482b248b2d 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -17,11 +17,6 @@
 #include <linux/module.h>
 #include <linux/usb/input.h>
 
-#define DRIVER_VERSION	"v0.1"
-#define DRIVER_AUTHOR	"Michael Downey <downey@zymeta.com>"
-#define DRIVER_DESC	"Driver for the USB Keyspan remote control."
-#define DRIVER_LICENSE	"GPL"
-
 /* Parameters that can be passed to the driver. */
 static int debug;
 module_param(debug, int, 0444);
@@ -590,6 +585,6 @@ static struct usb_driver keyspan_driver =
 module_usb_driver(keyspan_driver);
 
 MODULE_DEVICE_TABLE(usb, keyspan_table);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
+MODULE_AUTHOR("Michael Downey <downey@zymeta.com>");
+MODULE_DESCRIPTION("Driver for the USB Keyspan remote control.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 91df0df15e68..f640c591ef23 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -84,11 +84,14 @@ static int uinput_dev_event(struct input_dev *dev,
 			    unsigned int type, unsigned int code, int value)
 {
 	struct uinput_device	*udev = input_get_drvdata(dev);
+	struct timespec64	ts;
 
 	udev->buff[udev->head].type = type;
 	udev->buff[udev->head].code = code;
 	udev->buff[udev->head].value = value;
-	do_gettimeofday(&udev->buff[udev->head].time);
+	ktime_get_ts64(&ts);
+	udev->buff[udev->head].input_event_sec = ts.tv_sec;
+	udev->buff[udev->head].input_event_usec = ts.tv_nsec / NSEC_PER_USEC;
 	udev->head = (udev->head + 1) % UINPUT_BUFFER_SIZE;
 
 	wake_up_interruptible(&udev->waitq);
@@ -1085,4 +1088,3 @@ MODULE_ALIAS("devname:" UINPUT_NAME);
 MODULE_AUTHOR("Aristeu Sergio Rozanski Filho");
 MODULE_DESCRIPTION("User level driver support for input subsystem");
 MODULE_LICENSE("GPL");
-MODULE_VERSION("0.3");
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index a1e0ff59d2f2..f0c9bf87b4e3 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -56,8 +56,6 @@
 #include "yealink.h"
 
 #define DRIVER_VERSION "yld-20051230"
-#define DRIVER_AUTHOR "Henk Vergonet"
-#define DRIVER_DESC "Yealink phone driver"
 
 #define YEALINK_POLLING_FREQUENCY	10	/* in [Hz] */
 
@@ -1006,6 +1004,6 @@ module_usb_driver(yealink_driver);
 
 MODULE_DEVICE_TABLE (usb, usb_table);
 
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Henk Vergonet");
+MODULE_DESCRIPTION("Yealink phone driver");
 MODULE_LICENSE("GPL");