diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-27 16:03:32 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-27 16:03:32 -0700 |
commit | d61b7a572b292e2be409e13b4b3adf475f18fb29 (patch) | |
tree | e9d30390860147136c05e66abf1edda1bc5b0562 /drivers/gpio | |
parent | 18d9946bc7e2252fe3c0f2f609ac383c627edefd (diff) | |
parent | f4e2467bad53023589cbff18dd1ab6e0aa3f004c (diff) | |
download | linux-d61b7a572b292e2be409e13b4b3adf475f18fb29.tar.bz2 |
Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull "ARM: global cleanups" from Arnd Bergmann:
"Quite a bit of code gets removed, and some stuff moved around, mostly
the old samsung s3c24xx stuff. There should be no functional changes
in this series otherwise. Some cleanups have dependencies on other
arm-soc branches and will be sent in the second round.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fixed up trivial conflicts mainly due to #include's being changes on
both sides.
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
ep93xx: Remove unnecessary includes of ep93xx-regs.h
ep93xx: Move EP93XX_SYSCON defines to SoC private header
ep93xx: Move crunch code to mach-ep93xx directory
ep93xx: Make syscon access functions private to SoC
ep93xx: Configure GPIO ports in core code
ep93xx: Move peripheral defines to local SoC header
ep93xx: Convert the watchdog driver into a platform device.
ep93xx: Use ioremap for backlight driver
ep93xx: Move GPIO defines to gpio-ep93xx.h
ep93xx: Don't use system controller defines in audio drivers
ep93xx: Move PHYS_BASE defines to local SoC header file
ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
PM / devfreq: update the name of EXYNOS clock registers that were omitted
PM / devfreq: update the name of EXYNOS clock register
ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
ARM: EXYNOS: use static declaration on regarding clock
ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
ARM: OMAP2+: Fix build error after merge
ARM: S3C24XX: remove call to s3c24xx_setup_clocks
...
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/gpio-ep93xx.c | 7 | ||||
-rw-r--r-- | drivers/gpio/gpio-omap.c | 1106 |
2 files changed, 461 insertions, 652 deletions
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c index 1c0fc3756cb1..4ca5642e9776 100644 --- a/drivers/gpio/gpio-ep93xx.c +++ b/drivers/gpio/gpio-ep93xx.c @@ -378,13 +378,6 @@ static int __devinit ep93xx_gpio_probe(struct platform_device *pdev) } ep93xx_gpio->mmio_base = mmio; - /* Default all ports to GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i]; struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i]; diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0b0562979171..f49bd6f47a50 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/pm_runtime.h> +#include <linux/pm.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -28,19 +29,36 @@ #include <asm/gpio.h> #include <asm/mach/irq.h> +#define OFF_MODE 1 + +static LIST_HEAD(omap_gpio_list); + +struct gpio_regs { + u32 irqenable1; + u32 irqenable2; + u32 wake_en; + u32 ctrl; + u32 oe; + u32 leveldetect0; + u32 leveldetect1; + u32 risingdetect; + u32 fallingdetect; + u32 dataout; + u32 debounce; + u32 debounce_en; +}; + struct gpio_bank { + struct list_head node; unsigned long pbase; void __iomem *base; u16 irq; u16 virtual_irq_start; - int method; u32 suspend_wakeup; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) u32 saved_wakeup; -#endif u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; - + struct gpio_regs context; u32 saved_datain; u32 saved_fallingdetect; u32 saved_risingdetect; @@ -51,44 +69,27 @@ struct gpio_bank { struct clk *dbck; u32 mod_usage; u32 dbck_enable_mask; + bool dbck_enabled; struct device *dev; + bool is_mpuio; bool dbck_flag; + bool loses_context; int stride; u32 width; + int context_loss_count; + u16 id; + int power_mode; + bool workaround_enabled; void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable); + int (*get_context_loss_count)(struct device *dev); struct omap_gpio_reg_offs *regs; }; -#ifdef CONFIG_ARCH_OMAP3 -struct omap3_gpio_regs { - u32 irqenable1; - u32 irqenable2; - u32 wake_en; - u32 ctrl; - u32 oe; - u32 leveldetect0; - u32 leveldetect1; - u32 risingdetect; - u32 fallingdetect; - u32 dataout; -}; - -static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; -#endif - -/* - * TODO: Cleanup gpio_bank usage as it is having information - * related to all instances of the device - */ -static struct gpio_bank *gpio_bank; - -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -int gpio_bank_count; - #define GPIO_INDEX(bank, gpio) (gpio % bank->width) #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio)) +#define GPIO_MOD_CTRL_BIT BIT(0) static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { @@ -102,6 +103,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) else l &= ~(1 << gpio); __raw_writel(l, reg); + bank->context.oe = l; } @@ -132,6 +134,7 @@ static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable) else l &= ~gpio_bit; __raw_writel(l, reg); + bank->context.dataout = l; } static int _get_gpio_datain(struct gpio_bank *bank, int gpio) @@ -160,6 +163,22 @@ static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) __raw_writel(l, base + reg); } +static inline void _gpio_dbck_enable(struct gpio_bank *bank) +{ + if (bank->dbck_enable_mask && !bank->dbck_enabled) { + clk_enable(bank->dbck); + bank->dbck_enabled = true; + } +} + +static inline void _gpio_dbck_disable(struct gpio_bank *bank) +{ + if (bank->dbck_enable_mask && bank->dbck_enabled) { + clk_disable(bank->dbck); + bank->dbck_enabled = false; + } +} + /** * _set_gpio_debounce - low level gpio debounce time * @bank: the gpio bank we're acting upon @@ -188,70 +207,74 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, l = GPIO_BIT(bank, gpio); + clk_enable(bank->dbck); reg = bank->base + bank->regs->debounce; __raw_writel(debounce, reg); reg = bank->base + bank->regs->debounce_en; val = __raw_readl(reg); - if (debounce) { + if (debounce) val |= l; - clk_enable(bank->dbck); - } else { + else val &= ~l; - clk_disable(bank->dbck); - } bank->dbck_enable_mask = val; __raw_writel(val, reg); + clk_disable(bank->dbck); + /* + * Enable debounce clock per module. + * This call is mandatory because in omap_gpio_request() when + * *_runtime_get_sync() is called, _gpio_dbck_enable() within + * runtime callbck fails to turn on dbck because dbck_enable_mask + * used within _gpio_dbck_enable() is still not initialized at + * that point. Therefore we have to enable dbck here. + */ + _gpio_dbck_enable(bank); + if (bank->dbck_enable_mask) { + bank->context.debounce = debounce; + bank->context.debounce_en = val; + } } -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, +static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; - if (cpu_is_omap44xx()) { - _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } else { - _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } + _gpio_rmw(base, bank->regs->leveldetect0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, bank->regs->leveldetect1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, bank->regs->risingdetect, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, bank->regs->fallingdetect, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + + bank->context.leveldetect0 = + __raw_readl(bank->base + bank->regs->leveldetect0); + bank->context.leveldetect1 = + __raw_readl(bank->base + bank->regs->leveldetect1); + bank->context.risingdetect = + __raw_readl(bank->base + bank->regs->risingdetect); + bank->context.fallingdetect = + __raw_readl(bank->base + bank->regs->fallingdetect); + if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { - if (cpu_is_omap44xx()) { - _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit, - trigger != 0); - } else { - /* - * GPIO wakeup request can only be generated on edge - * transitions - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_SETWKUENA); - else - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_CLEARWKUENA); - } + _gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0); + bank->context.wake_en = + __raw_readl(bank->base + bank->regs->wkup_en); } + /* This part needs to be executed always for OMAP{34xx, 44xx} */ - if (cpu_is_omap34xx() || cpu_is_omap44xx() || - (bank->non_wakeup_gpios & gpio_bit)) { + if (!bank->regs->irqctrl) { + /* On omap24xx proceed only when valid GPIO bit is set */ + if (bank->non_wakeup_gpios) { + if (!(bank->non_wakeup_gpios & gpio_bit)) + goto exit; + } + /* * Log the edge gpio and manually trigger the IRQ * after resume if the input level changes @@ -264,17 +287,11 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, bank->enabled_non_wakeup_gpios &= ~gpio_bit; } - if (cpu_is_omap44xx()) { - bank->level_mask = - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); - } else { - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - } +exit: + bank->level_mask = + __raw_readl(bank->base + bank->regs->leveldetect0) | + __raw_readl(bank->base + bank->regs->leveldetect1); } -#endif #ifdef CONFIG_ARCH_OMAP1 /* @@ -286,23 +303,10 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) void __iomem *reg = bank->base; u32 l = 0; - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - break; -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - break; -#endif - default: + if (!bank->regs->irqctrl) return; - } + + reg += bank->regs->irqctrl; l = __raw_readl(reg); if ((l >> gpio) & 1) @@ -312,31 +316,21 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) __raw_writel(l, reg); } +#else +static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {} #endif static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *reg = bank->base; + void __iomem *base = bank->base; u32 l = 0; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; + if (bank->regs->leveldetect0 && bank->regs->wkup_en) { + set_gpio_trigger(bank, gpio, trigger); + } else if (bank->regs->irqctrl) { + reg += bank->regs->irqctrl; + l = __raw_readl(reg); if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; @@ -345,15 +339,15 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: + return -EINVAL; + + __raw_writel(l, reg); + } else if (bank->regs->edgectrl1) { if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; + reg += bank->regs->edgectrl2; else - reg += OMAP1610_GPIO_EDGE_CTRL1; + reg += bank->regs->edgectrl1; + gpio &= 0x07; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); @@ -361,40 +355,14 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) l |= 2 << (gpio << 1); if (trigger & IRQ_TYPE_EDGE_FALLING) l |= 1 << (gpio << 1); - if (trigger) - /* Enable wake-up during idle for dynamic tick */ - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); - else - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - set_24xx_gpio_triggering(bank, gpio, trigger); - return 0; -#endif - default: - goto bad; + + /* Enable wake-up during idle for dynamic tick */ + _gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger); + bank->context.wake_en = + __raw_readl(bank->base + bank->regs->wkup_en); + __raw_writel(l, reg); } - __raw_writel(l, reg); return 0; -bad: - return -EINVAL; } static int gpio_irq_type(struct irq_data *d, unsigned type) @@ -412,12 +380,12 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) if (type & ~IRQ_TYPE_SENSE_MASK) return -EINVAL; - /* OMAP1 allows only only edge triggering */ - if (!cpu_class_is_omap2() - && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) + bank = irq_data_get_irq_chip_data(d); + + if (!bank->regs->leveldetect0 && + (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) return -EINVAL; - bank = irq_data_get_irq_chip_data(d); spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type); spin_unlock_irqrestore(&bank->lock, flags); @@ -484,6 +452,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) } __raw_writel(l, reg); + bank->context.irqenable1 = l; } static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) @@ -504,6 +473,7 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) } __raw_writel(l, reg); + bank->context.irqenable1 = l; } static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) @@ -567,38 +537,39 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); unsigned long flags; - spin_lock_irqsave(&bank->lock, flags); + /* + * If this is the first gpio_request for the bank, + * enable the bank module. + */ + if (!bank->mod_usage) + pm_runtime_get_sync(bank->dev); + spin_lock_irqsave(&bank->lock, flags); /* Set trigger to none. You need to enable the desired trigger with * request_irq() or set_irq_type(). */ _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) { - void __iomem *reg; + if (bank->regs->pinctrl) { + void __iomem *reg = bank->base + bank->regs->pinctrl; /* Claim the pin for MPU */ - reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; __raw_writel(__raw_readl(reg) | (1 << offset), reg); } -#endif - if (!cpu_class_is_omap1()) { - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is enabled, clocks are not gated */ - ctrl &= 0xFFFFFFFE; - __raw_writel(ctrl, reg); - } - bank->mod_usage |= 1 << offset; + + if (bank->regs->ctrl && !bank->mod_usage) { + void __iomem *reg = bank->base + bank->regs->ctrl; + u32 ctrl; + + ctrl = __raw_readl(reg); + /* Module is enabled, clocks are not gated */ + ctrl &= ~GPIO_MOD_CTRL_BIT; + __raw_writel(ctrl, reg); + bank->context.ctrl = ctrl; } + + bank->mod_usage |= 1 << offset; + spin_unlock_irqrestore(&bank->lock, flags); return 0; @@ -607,48 +578,40 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) { struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); + void __iomem *base = bank->base; unsigned long flags; spin_lock_irqsave(&bank->lock, flags); -#ifdef CONFIG_ARCH_OMAP16XX - if (bank->method == METHOD_GPIO_1610) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - __raw_writel(1 << offset, reg); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - __raw_writel(1 << offset, reg); - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (bank->method == METHOD_GPIO_44XX) { + + if (bank->regs->wkup_en) { /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; - __raw_writel(1 << offset, reg); + _gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0); + bank->context.wake_en = + __raw_readl(bank->base + bank->regs->wkup_en); } -#endif - if (!cpu_class_is_omap1()) { - bank->mod_usage &= ~(1 << offset); - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is disabled, clocks are gated */ - ctrl |= 1; - __raw_writel(ctrl, reg); - } + + bank->mod_usage &= ~(1 << offset); + + if (bank->regs->ctrl && !bank->mod_usage) { + void __iomem *reg = bank->base + bank->regs->ctrl; + u32 ctrl; + + ctrl = __raw_readl(reg); + /* Module is disabled, clocks are gated */ + ctrl |= GPIO_MOD_CTRL_BIT; + __raw_writel(ctrl, reg); + bank->context.ctrl = ctrl; } + _reset_gpio(bank, bank->chip.base + offset); spin_unlock_irqrestore(&bank->lock, flags); + + /* + * If this is the last gpio to be freed in the bank, + * disable the bank module. + */ + if (!bank->mod_usage) + pm_runtime_put(bank->dev); } /* @@ -674,6 +637,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) bank = irq_get_handler_data(irq); isr_reg = bank->base + bank->regs->irqstatus; + pm_runtime_get_sync(bank->dev); if (WARN_ON(!isr_reg)) goto exit; @@ -685,12 +649,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) enabled = _get_gpio_irqbank_mask(bank); isr_saved = isr = __raw_readl(isr_reg) & enabled; - if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) - isr &= 0x0000ffff; - - if (cpu_class_is_omap2()) { + if (bank->level_mask) level_mask = bank->level_mask & enabled; - } /* clear edge sensitive interrupts before handler(s) are called so that we don't miss any interrupt occurred while @@ -718,7 +678,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (!(isr & 1)) continue; -#ifdef CONFIG_ARCH_OMAP1 /* * Some chips can't respond to both rising and falling * at the same time. If this irq was requested with @@ -728,7 +687,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) */ if (bank->toggle_mask & (1 << gpio_index)) _toggle_gpio_edge_triggering(bank, gpio_index); -#endif generic_handle_irq(gpio_irq); } @@ -740,6 +698,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) exit: if (!unmasked) chained_irq_exit(chip, desc); + pm_runtime_put(bank->dev); } static void gpio_irq_shutdown(struct irq_data *d) @@ -808,14 +767,6 @@ static struct irq_chip gpio_irq_chip = { /*---------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_OMAP1 - -#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) - -#ifdef CONFIG_ARCH_OMAP16XX - -#include <linux/platform_device.h> - static int omap_mpuio_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -869,32 +820,16 @@ static struct platform_device omap_mpuio_device = { /* could list the /proc/iomem resources */ }; -static inline void mpuio_init(void) +static inline void mpuio_init(struct gpio_bank *bank) { - struct gpio_bank *bank = &gpio_bank[0]; platform_set_drvdata(&omap_mpuio_device, bank); if (platform_driver_register(&omap_mpuio_driver) == 0) (void) platform_device_register(&omap_mpuio_device); } -#else -static inline void mpuio_init(void) {} -#endif /* 16xx */ - -#else - -#define bank_is_mpuio(bank) 0 -static inline void mpuio_init(void) {} - -#endif - /*---------------------------------------------------------------------*/ -/* REVISIT these are stupid implementations! replace by ones that - * don't switch on METHOD_* and which mostly avoid spinlocks - */ - static int gpio_input(struct gpio_chip *chip, unsigned offset) { struct gpio_bank *bank; @@ -1007,78 +942,32 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank) */ static struct lock_class_key gpio_lock_class; -static inline int init_gpio_info(struct platform_device *pdev) +static void omap_gpio_mod_init(struct gpio_bank *bank) { - /* TODO: Analyze removing gpio_bank_count usage from driver code */ - gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank), - GFP_KERNEL); - if (!gpio_bank) { - dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); - return -ENOMEM; - } - return 0; -} + void __iomem *base = bank->base; + u32 l = 0xffffffff; -/* TODO: Cleanup cpu_is_* checks */ -static void omap_gpio_mod_init(struct gpio_bank *bank, int id) -{ - if (cpu_class_is_omap2()) { - if (cpu_is_omap44xx()) { - __raw_writel(0xffffffff, bank->base + - OMAP4_GPIO_IRQSTATUSCLR0); - __raw_writel(0x00000000, bank->base + - OMAP4_GPIO_DEBOUNCENABLE); - /* Initialize interface clk ungated, module enabled */ - __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); - } else if (cpu_is_omap34xx()) { - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(0xffffffff, bank->base + - OMAP24XX_GPIO_IRQSTATUS1); - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_DEBOUNCE_EN); - - /* Initialize interface clk ungated, module enabled */ - __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); - } else if (cpu_is_omap24xx()) { - static const u32 non_wakeup_gpios[] = { - 0xe203ffc0, 0x08700040 - }; - if (id < ARRAY_SIZE(non_wakeup_gpios)) - bank->non_wakeup_gpios = non_wakeup_gpios[id]; - } - } else if (cpu_class_is_omap1()) { - if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base + - OMAP_MPUIO_GPIO_MASKIT / bank->stride); - if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { - __raw_writew(0xffff, bank->base - + OMAP1510_GPIO_INT_MASK); - __raw_writew(0x0000, bank->base - + OMAP1510_GPIO_INT_STATUS); - } - if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { - __raw_writew(0x0000, bank->base - + OMAP1610_GPIO_IRQENABLE1); - __raw_writew(0xffff, bank->base - + OMAP1610_GPIO_IRQSTATUS1); - __raw_writew(0x0014, bank->base - + OMAP1610_GPIO_SYSCONFIG); + if (bank->width == 16) + l = 0xffff; - /* - * Enable system clock for GPIO module. - * The CAM_CLK_CTRL *is* really the right place. - */ - omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, - ULPD_CAM_CLK_CTRL); - } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { - __raw_writel(0xffffffff, bank->base - + OMAP7XX_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base - + OMAP7XX_GPIO_INT_STATUS); - } + if (bank->is_mpuio) { + __raw_writel(l, bank->base + bank->regs->irqenable); + return; } + + _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv); + _gpio_rmw(base, bank->regs->irqstatus, l, + bank->regs->irqenable_inv == false); + _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->debounce_en != 0); + _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->ctrl != 0); + if (bank->regs->debounce_en) + _gpio_rmw(base, bank->regs->debounce_en, 0, 1); + + /* Save OE default value (0xffffffff) in the context */ + bank->context.oe = __raw_readl(bank->base + bank->regs->direction); + /* Initialize interface clk ungated, module enabled */ + if (bank->regs->ctrl) + _gpio_rmw(base, bank->regs->ctrl, 0, 1); } static __init void @@ -1101,8 +990,8 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = gpio_irq_type; - /* REVISIT: assuming only 16xx supports MPUIO wake events */ - if (cpu_is_omap16xx()) + + if (bank->regs->wkup_en) ct->chip.irq_set_wake = gpio_wake_enable, ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride; @@ -1115,7 +1004,6 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) int j; static int gpio; - bank->mod_usage = 0; /* * REVISIT eventually switch from OMAP-specific gpio structs * over to the generic ones @@ -1128,11 +1016,10 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) bank->chip.set_debounce = gpio_debounce; bank->chip.set = gpio_set; bank->chip.to_irq = gpio_2irq; - if (bank_is_mpuio(bank)) { + if (bank->is_mpuio) { bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP16XX - bank->chip.dev = &omap_mpuio_device.dev; -#endif + if (bank->regs->wkup_en) + bank->chip.dev = &omap_mpuio_device.dev; bank->chip.base = OMAP_MPUIO(0); } else { bank->chip.label = "gpio"; @@ -1147,7 +1034,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) j < bank->virtual_irq_start + bank->width; j++) { irq_set_lockdep_class(j, &gpio_lock_class); irq_set_chip_data(j, bank); - if (bank_is_mpuio(bank)) { + if (bank->is_mpuio) { omap_mpuio_alloc_gc(bank, j, bank->width); } else { irq_set_chip(j, &gpio_irq_chip); @@ -1161,42 +1048,44 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) static int __devinit omap_gpio_probe(struct platform_device *pdev) { - static int gpio_init_done; struct omap_gpio_platform_data *pdata; struct resource *res; - int id; struct gpio_bank *bank; + int ret = 0; - if (!pdev->dev.platform_data) - return -EINVAL; - - pdata = pdev->dev.platform_data; - - if (!gpio_init_done) { - int ret; - - ret = init_gpio_info(pdev); - if (ret) - return ret; + if (!pdev->dev.platform_data) { + ret = -EINVAL; + goto err_exit; } - id = pdev->id; - bank = &gpio_bank[id]; + bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL); + if (!bank) { + dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); + ret = -ENOMEM; + goto err_exit; + } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id); - return -ENODEV; + dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", + pdev->id); + ret = -ENODEV; + goto err_free; } bank->irq = res->start; + bank->id = pdev->id; + + pdata = pdev->dev.platform_data; bank->virtual_irq_start = pdata->virtual_irq_start; - bank->method = pdata->bank_type; bank->dev = &pdev->dev; bank->dbck_flag = pdata->dbck_flag; bank->stride = pdata->bank_stride; bank->width = pdata->bank_width; - + bank->is_mpuio = pdata->is_mpuio; + bank->non_wakeup_gpios = pdata->non_wakeup_gpios; + bank->loses_context = pdata->loses_context; + bank->get_context_loss_count = pdata->get_context_loss_count; bank->regs = pdata->regs; if (bank->regs->set_dataout && bank->regs->clr_dataout) @@ -1209,369 +1098,310 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) /* Static mapping, never released */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id); - return -ENODEV; + dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", + pdev->id); + ret = -ENODEV; + goto err_free; } bank->base = ioremap(res->start, resource_size(res)); if (!bank->base) { - dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id); - return -ENOMEM; + dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", + pdev->id); + ret = -ENOMEM; + goto err_free; } + platform_set_drvdata(pdev, bank); + pm_runtime_enable(bank->dev); + pm_runtime_irq_safe(bank->dev); pm_runtime_get_sync(bank->dev); - omap_gpio_mod_init(bank, id); + if (bank->is_mpuio) + mpuio_init(bank); + + omap_gpio_mod_init(bank); omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); - if (!gpio_init_done) - gpio_init_done = 1; + pm_runtime_put(bank->dev); - return 0; + list_add_tail(&bank->node, &omap_gpio_list); + + return ret; + +err_free: + kfree(bank); +err_exit: + return ret; } -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) -static int omap_gpio_suspend(void) +#ifdef CONFIG_ARCH_OMAP2PLUS + +#if defined(CONFIG_PM_SLEEP) +static int omap_gpio_suspend(struct device *dev) { - int i; + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *base = bank->base; + void __iomem *wakeup_enable; + unsigned long flags; - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) + if (!bank->mod_usage || !bank->loses_context) return 0; - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_status; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } + if (!bank->regs->wkup_en || !bank->suspend_wakeup) + return 0; - spin_lock_irqsave(&bank->lock, flags); - bank->saved_wakeup = __raw_readl(wake_status); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->suspend_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } + wakeup_enable = bank->base + bank->regs->wkup_en; + + spin_lock_irqsave(&bank->lock, flags); + bank->saved_wakeup = __raw_readl(wakeup_enable); + _gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0); + _gpio_rmw(base, bank->regs->wkup_en, bank->suspend_wakeup, 1); + spin_unlock_irqrestore(&bank->lock, flags); return 0; } -static void omap_gpio_resume(void) +static int omap_gpio_resume(struct device *dev) { - int i; + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *base = bank->base; + unsigned long flags; - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return; + if (!bank->mod_usage || !bank->loses_context) + return 0; - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } + if (!bank->regs->wkup_en || !bank->saved_wakeup) + return 0; - spin_lock_irqsave(&bank->lock, flags); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->saved_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } -} + spin_lock_irqsave(&bank->lock, flags); + _gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0); + _gpio_rmw(base, bank->regs->wkup_en, bank->saved_wakeup, 1); + spin_unlock_irqrestore(&bank->lock, flags); -static struct syscore_ops omap_gpio_syscore_ops = { - .suspend = omap_gpio_suspend, - .resume = omap_gpio_resume, -}; + return 0; +} +#endif /* CONFIG_PM_SLEEP */ -#endif +#if defined(CONFIG_PM_RUNTIME) +static void omap_gpio_restore_context(struct gpio_bank *bank); -#ifdef CONFIG_ARCH_OMAP2PLUS +static int omap_gpio_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + u32 l1 = 0, l2 = 0; + unsigned long flags; -static int workaround_enabled; + spin_lock_irqsave(&bank->lock, flags); + if (bank->power_mode != OFF_MODE) { + bank->power_mode = 0; + goto update_gpio_context_count; + } + /* + * If going to OFF, remove triggering for all + * non-wakeup GPIOs. Otherwise spurious IRQs will be + * generated. See OMAP2420 Errata item 1.101. + */ + if (!(bank->enabled_non_wakeup_gpios)) + goto update_gpio_context_count; -void omap2_gpio_prepare_for_idle(int off_mode) -{ - int i, c = 0; - int min = 0; + bank->saved_datain = __raw_readl(bank->base + + bank->regs->datain); + l1 = __raw_readl(bank->base + bank->regs->fallingdetect); + l2 = __raw_readl(bank->base + bank->regs->risingdetect); - if (cpu_is_omap34xx()) - min = 1; + bank->saved_fallingdetect = l1; + bank->saved_risingdetect = l2; + l1 &= ~bank->enabled_non_wakeup_gpios; + l2 &= ~bank->enabled_non_wakeup_gpios; - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l1 = 0, l2 = 0; - int j; + __raw_writel(l1, bank->base + bank->regs->fallingdetect); + __raw_writel(l2, bank->base + bank->regs->risingdetect); - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_disable(bank->dbck); + bank->workaround_enabled = true; - if (!off_mode) - continue; +update_gpio_context_count: + if (bank->get_context_loss_count) + bank->context_loss_count = + bank->get_context_loss_count(bank->dev); - /* If going to OFF, remove triggering for all - * non-wakeup GPIOs. Otherwise spurious IRQs will be - * generated. See OMAP2420 Errata item 1.101. */ - if (!(bank->enabled_non_wakeup_gpios)) - continue; + _gpio_dbck_disable(bank); + spin_unlock_irqrestore(&bank->lock, flags); - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP24XX_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } + return 0; +} - if (cpu_is_omap44xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP4_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP4_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP4_GPIO_RISINGDETECT); - } +static int omap_gpio_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + int context_lost_cnt_after; + u32 l = 0, gen, gen0, gen1; + unsigned long flags; - bank->saved_fallingdetect = l1; - bank->saved_risingdetect = l2; - l1 &= ~bank->enabled_non_wakeup_gpios; - l2 &= ~bank->enabled_non_wakeup_gpios; + spin_lock_irqsave(&bank->lock, flags); + _gpio_dbck_enable(bank); + if (!bank->enabled_non_wakeup_gpios || !bank->workaround_enabled) { + spin_unlock_irqrestore(&bank->lock, flags); + return 0; + } - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(l1, bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + - OMAP24XX_GPIO_RISINGDETECT); + if (bank->get_context_loss_count) { + context_lost_cnt_after = + bank->get_context_loss_count(bank->dev); + if (context_lost_cnt_after != bank->context_loss_count || + !context_lost_cnt_after) { + omap_gpio_restore_context(bank); + } else { + spin_unlock_irqrestore(&bank->lock, flags); + return 0; } + } - if (cpu_is_omap44xx()) { - __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); - } + __raw_writel(bank->saved_fallingdetect, + bank->base + bank->regs->fallingdetect); + __raw_writel(bank->saved_risingdetect, + bank->base + bank->regs->risingdetect); + l = __raw_readl(bank->base + bank->regs->datain); - c++; - } - if (!c) { - workaround_enabled = 0; - return; - } - workaround_enabled = 1; -} + /* + * Check if any of the non-wakeup interrupt GPIOs have changed + * state. If so, generate an IRQ by software. This is + * horribly racy, but it's the best we can do to work around + * this silicon bug. + */ + l ^= bank->saved_datain; + l &= bank->enabled_non_wakeup_gpios; -void omap2_gpio_resume_after_idle(void) -{ - int i; - int min = 0; + /* + * No need to generate IRQs for the rising edge for gpio IRQs + * configured with falling edge only; and vice versa. + */ + gen0 = l & bank->saved_fallingdetect; + gen0 &= bank->saved_datain; - if (cpu_is_omap34xx()) - min = 1; - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l = 0, gen, gen0, gen1; - int j; + gen1 = l & bank->saved_risingdetect; + gen1 &= ~(bank->saved_datain); - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_enable(bank->dbck); + /* FIXME: Consider GPIO IRQs with level detections properly! */ + gen = l & (~(bank->saved_fallingdetect) & ~(bank->saved_risingdetect)); + /* Consider all GPIO IRQs needed to be updated */ + gen |= gen0 | gen1; - if (!workaround_enabled) - continue; + if (gen) { + u32 old0, old1; - if (!(bank->enabled_non_wakeup_gpios)) - continue; + old0 = __raw_readl(bank->base + bank->regs->leveldetect0); + old1 = __raw_readl(bank->base + bank->regs->leveldetect1); if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); + __raw_writel(old0 | gen, bank->base + + bank->regs->leveldetect0); + __raw_writel(old1 | gen, bank->base + + bank->regs->leveldetect1); } if (cpu_is_omap44xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP4_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); - } - - /* Check if any of the non-wakeup interrupt GPIOs have changed - * state. If so, generate an IRQ by software. This is - * horribly racy, but it's the best we can do to work around - * this silicon bug. */ - l ^= bank->saved_datain; - l &= bank->enabled_non_wakeup_gpios; - - /* - * No need to generate IRQs for the rising edge for gpio IRQs - * configured with falling edge only; and vice versa. - */ - gen0 = l & bank->saved_fallingdetect; - gen0 &= bank->saved_datain; - - gen1 = l & bank->saved_risingdetect; - gen1 &= ~(bank->saved_datain); - - /* FIXME: Consider GPIO IRQs with level detections properly! */ - gen = l & (~(bank->saved_fallingdetect) & - ~(bank->saved_risingdetect)); - /* Consider all GPIO IRQs needed to be updated */ - gen |= gen0 | gen1; - - if (gen) { - u32 old0, old1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - old0 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - } - - if (cpu_is_omap44xx()) { - old0 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0 | l, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1 | l, bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP4_GPIO_LEVELDETECT1); - } + __raw_writel(old0 | l, bank->base + + bank->regs->leveldetect0); + __raw_writel(old1 | l, bank->base + + bank->regs->leveldetect1); } + __raw_writel(old0, bank->base + bank->regs->leveldetect0); + __raw_writel(old1, bank->base + bank->regs->leveldetect1); } + bank->workaround_enabled = false; + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; } +#endif /* CONFIG_PM_RUNTIME */ -#endif +void omap2_gpio_prepare_for_idle(int pwr_mode) +{ + struct gpio_bank *bank; + + list_for_each_entry(bank, &omap_gpio_list, node) { + if (!bank->mod_usage || !bank->loses_context) + continue; + + bank->power_mode = pwr_mode; + + pm_runtime_put_sync_suspend(bank->dev); + } +} -#ifdef CONFIG_ARCH_OMAP3 -/* save the registers of bank 2-6 */ -void omap_gpio_save_context(void) +void omap2_gpio_resume_after_idle(void) { - int i; - - /* saving banks from 2-6 only since GPIO1 is in WKUP */ - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - gpio_context[i].irqenable1 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); - gpio_context[i].irqenable2 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); - gpio_context[i].wake_en = - __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); - gpio_context[i].ctrl = - __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); - gpio_context[i].oe = - __raw_readl(bank->base + OMAP24XX_GPIO_OE); - gpio_context[i].leveldetect0 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); - gpio_context[i].leveldetect1 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - gpio_context[i].risingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); - gpio_context[i].fallingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); - gpio_context[i].dataout = - __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); + struct gpio_bank *bank; + + list_for_each_entry(bank, &omap_gpio_list, node) { + if (!bank->mod_usage || !bank->loses_context) + continue; + + pm_runtime_get_sync(bank->dev); } } -/* restore the required registers of bank 2-6 */ -void omap_gpio_restore_context(void) +#if defined(CONFIG_PM_RUNTIME) +static void omap_gpio_restore_context(struct gpio_bank *bank) { - int i; - - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - __raw_writel(gpio_context[i].irqenable1, - bank->base + OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(gpio_context[i].irqenable2, - bank->base + OMAP24XX_GPIO_IRQENABLE2); - __raw_writel(gpio_context[i].wake_en, - bank->base + OMAP24XX_GPIO_WAKE_EN); - __raw_writel(gpio_context[i].ctrl, - bank->base + OMAP24XX_GPIO_CTRL); - __raw_writel(gpio_context[i].oe, - bank->base + OMAP24XX_GPIO_OE); - __raw_writel(gpio_context[i].leveldetect0, - bank->base + OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(gpio_context[i].leveldetect1, - bank->base + OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(gpio_context[i].risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - __raw_writel(gpio_context[i].fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(gpio_context[i].dataout, - bank->base + OMAP24XX_GPIO_DATAOUT); + __raw_writel(bank->context.wake_en, + bank->base + bank->regs->wkup_en); + __raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl); + __raw_writel(bank->context.leveldetect0, + bank->base + bank->regs->leveldetect0); + __raw_writel(bank->context.leveldetect1, + bank->base + bank->regs->leveldetect1); + __raw_writel(bank->context.risingdetect, + bank->base + bank->regs->risingdetect); + __raw_writel(bank->context.fallingdetect, + bank->base + bank->regs->fallingdetect); + if (bank->regs->set_dataout && bank->regs->clr_dataout) + __raw_writel(bank->context.dataout, + bank->base + bank->regs->set_dataout); + else + __raw_writel(bank->context.dataout, + bank->base + bank->regs->dataout); + __raw_writel(bank->context.oe, bank->base + bank->regs->direction); + + if (bank->dbck_enable_mask) { + __raw_writel(bank->context.debounce, bank->base + + bank->regs->debounce); + __raw_writel(bank->context.debounce_en, + bank->base + bank->regs->debounce_en); } + + __raw_writel(bank->context.irqenable1, + bank->base + bank->regs->irqenable); + __raw_writel(bank->context.irqenable2, + bank->base + bank->regs->irqenable2); } +#endif /* CONFIG_PM_RUNTIME */ +#else +#define omap_gpio_suspend NULL +#define omap_gpio_resume NULL +#define omap_gpio_runtime_suspend NULL +#define omap_gpio_runtime_resume NULL #endif +static const struct dev_pm_ops gpio_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume) + SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume, + NULL) +}; + static struct platform_driver omap_gpio_driver = { .probe = omap_gpio_probe, .driver = { .name = "omap_gpio", + .pm = &gpio_pm_ops, }, }; @@ -1585,17 +1415,3 @@ static int __init omap_gpio_drv_reg(void) return platform_driver_register(&omap_gpio_driver); } postcore_initcall(omap_gpio_drv_reg); - -static int __init omap_gpio_sysinit(void) -{ - mpuio_init(); - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (cpu_is_omap16xx() || cpu_class_is_omap2()) - register_syscore_ops(&omap_gpio_syscore_ops); -#endif - - return 0; -} - -arch_initcall(omap_gpio_sysinit); |