drivers/fsi: Add hub master support

Add an engine driver to expose a "hub" FSI master - which has a set of
control registers in the engine address space, and uses a chunk of the
slave address space for actual FSI communication.

Additional changes from Jeremy Kerr <jk@ozlabs.org>.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 336 insertions, 0 deletions

diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index 558252336932..6821ed0cd5e8 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -20,6 +20,14 @@ config FSI_MASTER_GPIO
 	---help---
 	This option enables a FSI master driver using GPIO lines.
 
+config FSI_MASTER_HUB
+	tristate "FSI hub master"
+	---help---
+	This option enables a FSI hub master driver.  Hub is a type of FSI
+	master that is connected to the upstream master via a slave.  Hubs
+	allow chaining of FSI links to an arbitrary depth.  This allows for
+	a high target device fanout.
+
 config FSI_SCOM
 	tristate "SCOM FSI client device driver"
 	---help---
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index 3466f08f9aba..65eb99dfafdb 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -1,4 +1,5 @@
 
 obj-$(CONFIG_FSI) += fsi-core.o
+obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o
 obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
 obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
diff --git a/drivers/fsi/fsi-master-hub.c b/drivers/fsi/fsi-master-hub.c
new file mode 100644
index 000000000000..133b9bff1d65
--- /dev/null
+++ b/drivers/fsi/fsi-master-hub.c
@@ -0,0 +1,327 @@
+/*
+ * FSI hub master driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "fsi-master.h"
+
+/* Control Registers */
+#define FSI_MMODE		0x0		/* R/W: mode */
+#define FSI_MDLYR		0x4		/* R/W: delay */
+#define FSI_MCRSP		0x8		/* R/W: clock rate */
+#define FSI_MENP0		0x10		/* R/W: enable */
+#define FSI_MLEVP0		0x18		/* R: plug detect */
+#define FSI_MSENP0		0x18		/* S: Set enable */
+#define FSI_MCENP0		0x20		/* C: Clear enable */
+#define FSI_MAEB		0x70		/* R: Error address */
+#define FSI_MVER		0x74		/* R: master version/type */
+#define FSI_MRESP0		0xd0		/* W: Port reset */
+#define FSI_MESRB0		0x1d0		/* R: Master error status */
+#define FSI_MRESB0		0x1d0		/* W: Reset bridge */
+#define FSI_MECTRL		0x2e0		/* W: Error control */
+
+/* MMODE: Mode control */
+#define FSI_MMODE_EIP		0x80000000	/* Enable interrupt polling */
+#define FSI_MMODE_ECRC		0x40000000	/* Enable error recovery */
+#define FSI_MMODE_EPC		0x10000000	/* Enable parity checking */
+#define FSI_MMODE_P8_TO_LSB	0x00000010	/* Timeout value LSB */
+						/*   MSB=1, LSB=0 is 0.8 ms */
+						/*   MSB=0, LSB=1 is 0.9 ms */
+#define FSI_MMODE_CRS0SHFT	18		/* Clk rate selection 0 shift */
+#define FSI_MMODE_CRS0MASK	0x3ff		/* Clk rate selection 0 mask */
+#define FSI_MMODE_CRS1SHFT	8		/* Clk rate selection 1 shift */
+#define FSI_MMODE_CRS1MASK	0x3ff		/* Clk rate selection 1 mask */
+
+/* MRESB: Reset brindge */
+#define FSI_MRESB_RST_GEN	0x80000000	/* General reset */
+#define FSI_MRESB_RST_ERR	0x40000000	/* Error Reset */
+
+/* MRESB: Reset port */
+#define FSI_MRESP_RST_ALL_MASTER 0x20000000	/* Reset all FSI masters */
+#define FSI_MRESP_RST_ALL_LINK	0x10000000	/* Reset all FSI port contr. */
+#define FSI_MRESP_RST_MCR	0x08000000	/* Reset FSI master reg. */
+#define FSI_MRESP_RST_PYE	0x04000000	/* Reset FSI parity error */
+#define FSI_MRESP_RST_ALL	0xfc000000	/* Reset any error */
+
+/* MECTRL: Error control */
+#define FSI_MECTRL_EOAE		0x8000		/* Enable machine check when */
+						/* master 0 in error */
+#define FSI_MECTRL_P8_AUTO_TERM	0x4000		/* Auto terminate */
+
+#define FSI_ENGID_HUB_MASTER		0x1c
+#define FSI_HUB_LINK_OFFSET		0x80000
+#define FSI_HUB_LINK_SIZE		0x80000
+#define FSI_HUB_MASTER_MAX_LINKS	8
+
+#define FSI_LINK_ENABLE_SETUP_TIME	10	/* in mS */
+
+/*
+ * FSI hub master support
+ *
+ * A hub master increases the number of potential target devices that the
+ * primary FSI master can access. For each link a primary master supports,
+ * each of those links can in turn be chained to a hub master with multiple
+ * links of its own.
+ *
+ * The hub is controlled by a set of control registers exposed as a regular fsi
+ * device (the hub->upstream device), and provides access to the downstream FSI
+ * bus as through an address range on the slave itself (->addr and ->size).
+ *
+ * [This differs from "cascaded" masters, which expose the entire downstream
+ * bus entirely through the fsi device address range, and so have a smaller
+ * accessible address space.]
+ */
+struct fsi_master_hub {
+	struct fsi_master	master;
+	struct fsi_device	*upstream;
+	uint32_t		addr, size;	/* slave-relative addr of */
+						/* master address space */
+};
+
+#define to_fsi_master_hub(m) container_of(m, struct fsi_master_hub, master)
+
+static int hub_master_read(struct fsi_master *master, int link,
+			uint8_t id, uint32_t addr, void *val, size_t size)
+{
+	struct fsi_master_hub *hub = to_fsi_master_hub(master);
+
+	if (id != 0)
+		return -EINVAL;
+
+	addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
+	return fsi_slave_read(hub->upstream->slave, addr, val, size);
+}
+
+static int hub_master_write(struct fsi_master *master, int link,
+			uint8_t id, uint32_t addr, const void *val, size_t size)
+{
+	struct fsi_master_hub *hub = to_fsi_master_hub(master);
+
+	if (id != 0)
+		return -EINVAL;
+
+	addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
+	return fsi_slave_write(hub->upstream->slave, addr, val, size);
+}
+
+static int hub_master_break(struct fsi_master *master, int link)
+{
+	uint32_t addr, cmd;
+
+	addr = 0x4;
+	cmd = cpu_to_be32(0xc0de0000);
+
+	return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
+}
+
+static int hub_master_link_enable(struct fsi_master *master, int link)
+{
+	struct fsi_master_hub *hub = to_fsi_master_hub(master);
+	int idx, bit;
+	__be32 reg;
+	int rc;
+
+	idx = link / 32;
+	bit = link % 32;
+
+	reg = cpu_to_be32(0x80000000 >> bit);
+
+	rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), &reg, 4);
+
+	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+	fsi_device_read(hub->upstream, FSI_MENP0 + (4 * idx), &reg, 4);
+
+	return rc;
+}
+
+static void hub_master_release(struct device *dev)
+{
+	struct fsi_master_hub *hub = to_fsi_master_hub(dev_to_fsi_master(dev));
+
+	kfree(hub);
+}
+
+/* mmode encoders */
+static inline u32 fsi_mmode_crs0(u32 x)
+{
+	return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
+}
+
+static inline u32 fsi_mmode_crs1(u32 x)
+{
+	return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
+}
+
+static int hub_master_init(struct fsi_master_hub *hub)
+{
+	struct fsi_device *dev = hub->upstream;
+	__be32 reg;
+	int rc;
+
+	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	/* Initialize the MFSI (hub master) engine */
+	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
+	rc = fsi_device_write(dev, FSI_MECTRL, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
+			| fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
+			| FSI_MMODE_P8_TO_LSB);
+	rc = fsi_device_write(dev, FSI_MMODE, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	reg = cpu_to_be32(0xffff0000);
+	rc = fsi_device_write(dev, FSI_MDLYR, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	reg = ~0;
+	rc = fsi_device_write(dev, FSI_MSENP0, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	/* Leave enabled long enough for master logic to set up */
+	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+	rc = fsi_device_write(dev, FSI_MCENP0, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	rc = fsi_device_read(dev, FSI_MAEB, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
+	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	rc = fsi_device_read(dev, FSI_MLEVP0, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	/* Reset the master bridge */
+	reg = cpu_to_be32(FSI_MRESB_RST_GEN);
+	rc = fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
+	if (rc)
+		return rc;
+
+	reg = cpu_to_be32(FSI_MRESB_RST_ERR);
+	return fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
+}
+
+static int hub_master_probe(struct device *dev)
+{
+	struct fsi_device *fsi_dev = to_fsi_dev(dev);
+	struct fsi_master_hub *hub;
+	uint32_t reg, links;
+	__be32 __reg;
+	int rc;
+
+	rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
+	if (rc)
+		return rc;
+
+	reg = be32_to_cpu(__reg);
+	links = (reg >> 8) & 0xff;
+	dev_info(dev, "hub version %08x (%d links)\n", reg, links);
+
+	rc = fsi_slave_claim_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
+			FSI_HUB_LINK_SIZE * links);
+	if (rc) {
+		dev_err(dev, "can't claim slave address range for links");
+		return rc;
+	}
+
+	hub = kzalloc(sizeof(*hub), GFP_KERNEL);
+	if (!hub) {
+		rc = -ENOMEM;
+		goto err_release;
+	}
+
+	hub->addr = FSI_HUB_LINK_OFFSET;
+	hub->size = FSI_HUB_LINK_SIZE * links;
+	hub->upstream = fsi_dev;
+
+	hub->master.dev.parent = dev;
+	hub->master.dev.release = hub_master_release;
+
+	hub->master.n_links = links;
+	hub->master.read = hub_master_read;
+	hub->master.write = hub_master_write;
+	hub->master.send_break = hub_master_break;
+	hub->master.link_enable = hub_master_link_enable;
+
+	dev_set_drvdata(dev, hub);
+
+	hub_master_init(hub);
+
+	rc = fsi_master_register(&hub->master);
+	if (!rc)
+		return 0;
+
+	kfree(hub);
+err_release:
+	fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
+			FSI_HUB_LINK_SIZE * links);
+	return rc;
+}
+
+static int hub_master_remove(struct device *dev)
+{
+	struct fsi_master_hub *hub = dev_get_drvdata(dev);
+
+	fsi_master_unregister(&hub->master);
+	fsi_slave_release_range(hub->upstream->slave, hub->addr, hub->size);
+	return 0;
+}
+
+static struct fsi_device_id hub_master_ids[] = {
+	{
+		.engine_type = FSI_ENGID_HUB_MASTER,
+		.version = FSI_VERSION_ANY,
+	},
+	{ 0 }
+};
+
+static struct fsi_driver hub_master_driver = {
+	.id_table = hub_master_ids,
+	.drv = {
+		.name = "fsi-master-hub",
+		.bus = &fsi_bus_type,
+		.probe = hub_master_probe,
+		.remove = hub_master_remove,
+	}
+};
+
+module_fsi_driver(hub_master_driver);
+MODULE_LICENSE("GPL");