diff options
author | Jeremy Kerr <jk@ozlabs.org> | 2019-06-28 16:07:37 +0800 |
---|---|---|
committer | Joel Stanley <joel@jms.id.au> | 2019-07-03 10:42:53 +0930 |
commit | 371975b0b07520c85098652d561639837a60a905 (patch) | |
tree | aac84f2d733510e69e1d8031ea4a8cf7a818b51a /drivers/fsi/fsi-core.c | |
parent | afd26118f0dcf29db031a213f6f95c46ff3bdcbe (diff) | |
download | linux-371975b0b07520c85098652d561639837a60a905.tar.bz2 |
fsi/core: Fix error paths on CFAM init
Change d1dcd67825 re-worked the struct fsi_slave initialisation in
fsi_slave_init, but introduced a few inconsitencies: the slave->dev is
now registered through cdev_device_add, but we may kfree() the device
out from underneath the cdev registration. We may also leave an IDA
allocated.
This change fixes the error paths, so that we kfree() only before the
device is registered with the core code. We also move the smode write to
before we start creating proper devices, as it's the most likely to
fail. We also remove the IDA-allocated minor on error, and properly
clean up the of_node.
Fixes: d1dcd6782576 ("fsi: Add cfam char devices")
Reported-by: Lei YU <mine260309@gmail.com>
Tested-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Diffstat (limited to 'drivers/fsi/fsi-core.c')
-rw-r--r-- | drivers/fsi/fsi-core.c | 32 |
1 files changed, 20 insertions, 12 deletions
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c index 2c31563fdcae..10e443b7f892 100644 --- a/drivers/fsi/fsi-core.c +++ b/drivers/fsi/fsi-core.c @@ -1037,6 +1037,14 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id) } + rc = fsi_slave_set_smode(slave); + if (rc) { + dev_warn(&master->dev, + "can't set smode on slave:%02x:%02x %d\n", + link, id, rc); + goto err_free; + } + /* Allocate a minor in the FSI space */ rc = __fsi_get_new_minor(slave, fsi_dev_cfam, &slave->dev.devt, &slave->cdev_idx); @@ -1048,17 +1056,14 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id) rc = cdev_device_add(&slave->cdev, &slave->dev); if (rc) { dev_err(&slave->dev, "Error %d creating slave device\n", rc); - goto err_free; + goto err_free_ida; } - rc = fsi_slave_set_smode(slave); - if (rc) { - dev_warn(&master->dev, - "can't set smode on slave:%02x:%02x %d\n", - link, id, rc); - kfree(slave); - return -ENODEV; - } + /* Now that we have the cdev registered with the core, any fatal + * failures beyond this point will need to clean up through + * cdev_device_del(). Fortunately though, nothing past here is fatal. + */ + if (master->link_config) master->link_config(master, link, slave->t_send_delay, @@ -1075,10 +1080,13 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id) dev_dbg(&master->dev, "failed during slave scan with: %d\n", rc); - return rc; + return 0; - err_free: - put_device(&slave->dev); +err_free_ida: + fsi_free_minor(slave->dev.devt); +err_free: + of_node_put(slave->dev.of_node); + kfree(slave); return rc; } |