Merge tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux

Pull xtensa updates from Chris Zankel:
 "Support for the latest MMU architecture that allows for a larger
  accessible memory region, and various bug-fixes"

* tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux:
  xtensa: Switch to asm-generic/linkage.h
  xtensa: fix redboot load address
  xtensa: ISS: fix timer_lock usage in rs_open
  xtensa: disable IRQs while IRQ handler is running
  xtensa: enable lockdep support
  xtensa: fix arch_irqs_disabled_flags implementation
  xtensa: add irq flags trace support
  xtensa: provide custom CALLER_ADDR* implementations
  xtensa: add stacktrace support
  xtensa: clean up stpill_registers
  xtensa: don't use a7 in simcalls
  xtensa: don't attempt to use unconfigured timers
  xtensa: provide default platform_pcibios_init implementation
  xtensa: remove KCORE_ELF again
  xtensa: document MMUv3 setup sequence
  xtensa: add MMU v3 support
  xtensa: fix ibreakenable register update
  xtensa: fix oprofile building as module

32 files changed, 773 insertions, 254 deletions

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index acdfc615cca2..0a1b95f81a32 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -1,11 +1,9 @@
-config FRAME_POINTER
-	def_bool n
-
 config ZONE_DMA
 	def_bool y
 
 config XTENSA
 	def_bool y
+	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_IDE
 	select GENERIC_ATOMIC64
 	select HAVE_GENERIC_HARDIRQS
@@ -49,6 +47,15 @@ config HZ
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
 config MMU
 	def_bool n
 
@@ -100,6 +107,35 @@ config MATH_EMULATION
 	help
 	Can we use information of configuration file?
 
+config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	bool "Initialize Xtensa MMU inside the Linux kernel code"
+	default y
+	help
+	  Earlier version initialized the MMU in the exception vector
+	  before jumping to _startup in head.S and had an advantage that
+	  it was possible to place a software breakpoint at 'reset' and
+	  then enter your normal kernel breakpoints once the MMU was mapped
+	  to the kernel mappings (0XC0000000).
+
+	  This unfortunately doesn't work for U-Boot and likley also wont
+	  work for using KEXEC to have a hot kernel ready for doing a
+	  KDUMP.
+
+	  So now the MMU is initialized in head.S but it's necessary to
+	  use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup.
+	  xt-gdb can't place a Software Breakpoint in the  0XD region prior
+	  to mapping the MMU and after mapping even if the area of low memory
+	  was mapped gdb wouldn't remove the breakpoint on hitting it as the
+	  PC wouldn't match. Since Hardware Breakpoints are recommended for
+	  Linux configurations it seems reasonable to just assume they exist
+	  and leave this older mechanism for unfortunate souls that choose
+	  not to follow Tensilica's recommendation.
+
+	  Selecting this will cause U-Boot to set the KERNEL Load and Entry
+	  address at 0x00003000 instead of the mapped std of 0xD0003000.
+
+	  If in doubt, say Y.
+
 endmenu
 
 config XTENSA_CALIBRATE_CCOUNT
@@ -249,21 +285,6 @@ endmenu
 
 menu "Executable file formats"
 
-# only elf supported
-config KCORE_ELF
-	def_bool y
-        depends on PROC_FS
-        help
-          If you enabled support for /proc file system then the file
-          /proc/kcore will contain the kernel core image in ELF format. This
-          can be used in gdb:
-
-          $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
-
-          This is especially useful if you have compiled the kernel with the
-          "-g" option to preserve debugging information. It is mainly used
-	  for examining kernel data structures on the live kernel.
-
 source "fs/Kconfig.binfmt"
 
 endmenu
diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile
index 1fe01b78c124..89db089f5a12 100644
--- a/arch/xtensa/boot/boot-elf/Makefile
+++ b/arch/xtensa/boot/boot-elf/Makefile
@@ -12,6 +12,7 @@ endif
 
 export OBJCOPY_ARGS
 export CPPFLAGS_boot.lds += -P -C
+export KBUILD_AFLAGS += -mtext-section-literals
 
 boot-y		:= bootstrap.o
 
diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S
index 7b646e0a6486..932b58ef33d4 100644
--- a/arch/xtensa/boot/boot-elf/boot.lds.S
+++ b/arch/xtensa/boot/boot-elf/boot.lds.S
@@ -1,41 +1,29 @@
-#include <variant/core.h>
+/*
+ *  linux/arch/xtensa/boot/boot-elf/boot.lds.S
+ *
+ *  Copyright (C) 2008 - 2013 by Tensilica Inc.
+ *
+ *  Chris Zankel <chris@zankel.net>
+ *  Marc Gauthier <marc@tensilica.com
+ *  Pete Delaney <piet@tensilica.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/vectors.h>
 OUTPUT_ARCH(xtensa)
 ENTRY(_ResetVector)
 
 SECTIONS
 {
-	.start 0xD0000000 : { *(.start) }
-
-	.text 0xD0000000:
-	{
-		__reloc_start = . ;
-		_text_start = . ;
-		*(.literal .text.literal .text)
-		_text_end = . ;
-	}
-
-	.rodata ALIGN(0x04):
-	{
-		*(.rodata)
-		*(.rodata1)
-	}
-
-	.data ALIGN(0x04):
+	.ResetVector.text XCHAL_RESET_VECTOR_VADDR :
 	{
-		*(.data)
-		*(.data1)
-		*(.sdata)
-		*(.sdata2)
-		*(.got.plt)
-		*(.got)
-		*(.dynamic)
+		*(.ResetVector.text)
 	}
 
-	__reloc_end = . ;
-
-	. = ALIGN(0x10);
-	__image_load = . ;
-	.image 0xd0001000:
+	.image KERNELOFFSET: AT (LOAD_MEMORY_ADDRESS)
 	{
 		_image_start = .;
 		*(image)
@@ -43,7 +31,6 @@ SECTIONS
 		_image_end = .	;
 	}
 
-
 	.bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3):
 	{
 		__bss_start = .;
@@ -53,14 +40,15 @@ SECTIONS
 		*(.bss)
 		__bss_end = .;
 	}
-	_end = .;
-	_param_start = .;
 
-	.ResetVector.text XCHAL_RESET_VECTOR_VADDR :
+	/*
+	 * This is a remapped copy of the Reset Vector Code.
+	 * It keeps gdb in sync with the PC after switching
+	 * to the temporary mapping used while setting up
+	 * the V2 MMU mappings for Linux.
+	 */
+	.ResetVector.remapped_text 0x46000000 (INFO):
 	{
-		*(.ResetVector.text)
+		*(.ResetVector.remapped_text)
 	}
-
-
-	PROVIDE (end = .);
 }
diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S
index 464298bc348b..1388a499753b 100644
--- a/arch/xtensa/boot/boot-elf/bootstrap.S
+++ b/arch/xtensa/boot/boot-elf/bootstrap.S
@@ -1,18 +1,77 @@
+/*
+ * arch/xtensa/boot/boot-elf/bootstrap.S
+ *
+ * Low-level exception handling
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 - 2013 by Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Marc Gauthier <marc@tensilica.com>
+ * Piet Delaney <piet@tensilica.com>
+ */
 
 #include <asm/bootparam.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/cacheasm.h>
+#include <asm/initialize_mmu.h>
+#include <linux/linkage.h>
 
-
-/* ResetVector
- */
-	.section        .ResetVector.text, "ax"
+	.section	.ResetVector.text, "ax"
 	.global         _ResetVector
+	.global         reset
+
 _ResetVector:
-	_j reset
+	_j _SetupMMU
+
+	.begin  no-absolute-literals
+	.literal_position
+
 	.align 4
 RomInitAddr:
-	.word 0xd0001000
+#if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \
+	XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+	.word 0x00003000
+#else
+	.word 0xd0003000
+#endif
 RomBootParam:
 	.word _bootparam
+_bootparam:
+	.short	BP_TAG_FIRST
+	.short	4
+	.long	BP_VERSION
+	.short	BP_TAG_LAST
+	.short	0
+	.long	0
+
+	.align  4
+_SetupMMU:
+	movi	a0, 0
+	wsr	a0, windowbase
+	rsync
+	movi	a0, 1
+	wsr	a0, windowstart
+	rsync
+	movi	a0, 0x1F
+	wsr	a0, ps
+	rsync
+
+	Offset = _SetupMMU - _ResetVector
+
+#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	initialize_mmu
+#endif
+
+	.end    no-absolute-literals
+
+	rsil    a0, XCHAL_DEBUGLEVEL-1
+	rsync
 reset:
 	l32r    a0, RomInitAddr
 	l32r	a2, RomBootParam
@@ -21,13 +80,25 @@ reset:
 	jx      a0
 
 	.align 4
-	.section .bootstrap.data, "aw"
 
-	.globl _bootparam
-_bootparam:
-	.short	BP_TAG_FIRST
-	.short	4
-	.long	BP_VERSION
-	.short	BP_TAG_LAST
-	.short	0
-	.long	0
+	.section	.ResetVector.remapped_text, "x"
+	.global         _RemappedResetVector
+
+	/* Do org before literals */
+	.org 0
+
+_RemappedResetVector:
+	.begin  no-absolute-literals
+	.literal_position
+
+	_j	_RemappedSetupMMU
+
+	/* Position Remapped code at the same location as the original code */
+	. = _RemappedResetVector + Offset
+
+_RemappedSetupMMU:
+#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	initialize_mmu
+#endif
+
+	.end    no-absolute-literals
diff --git a/arch/xtensa/boot/boot-redboot/boot.ld b/arch/xtensa/boot/boot-redboot/boot.ld
index 5bbcaf9e830d..b0b9e95b58bd 100644
--- a/arch/xtensa/boot/boot-redboot/boot.ld
+++ b/arch/xtensa/boot/boot-redboot/boot.ld
@@ -33,7 +33,7 @@ SECTIONS
 
 	. = ALIGN(0x10);
 	__image_load = . ;
-	.image 0xd0001000: AT(__image_load)
+	.image 0xd0003000: AT(__image_load)
 	{
 		_image_start = .;
 		*(image)
diff --git a/arch/xtensa/boot/boot-uboot/Makefile b/arch/xtensa/boot/boot-uboot/Makefile
index bfbf8af582f1..545759819ef9 100644
--- a/arch/xtensa/boot/boot-uboot/Makefile
+++ b/arch/xtensa/boot/boot-uboot/Makefile
@@ -4,7 +4,11 @@
 # for more details.
 #
 
-UIMAGE_LOADADDR = 0xd0001000
+ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+UIMAGE_LOADADDR = 0x00003000
+else
+UIMAGE_LOADADDR = 0xd0003000
+endif
 UIMAGE_COMPRESSION = gzip
 
 $(obj)/../uImage: vmlinux.bin.gz FORCE
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 095f0a2244f7..1b982641ec35 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -15,6 +15,7 @@ generic-y += irq_regs.h
 generic-y += kdebug.h
 generic-y += kmap_types.h
 generic-y += kvm_para.h
+generic-y += linkage.h
 generic-y += local.h
 generic-y += local64.h
 generic-y += percpu.h
diff --git a/arch/xtensa/include/asm/ftrace.h b/arch/xtensa/include/asm/ftrace.h
index 40a8c178f10d..36dc7a684397 100644
--- a/arch/xtensa/include/asm/ftrace.h
+++ b/arch/xtensa/include/asm/ftrace.h
@@ -1 +1,33 @@
-/* empty */
+/*
+ * arch/xtensa/include/asm/ftrace.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Tensilica Inc.
+ */
+#ifndef _XTENSA_FTRACE_H
+#define _XTENSA_FTRACE_H
+
+#include <asm/processor.h>
+
+#define HAVE_ARCH_CALLER_ADDR
+#define CALLER_ADDR0 ({ unsigned long a0, a1; \
+		__asm__ __volatile__ ( \
+			"mov %0, a0\n" \
+			"mov %1, a1\n" \
+			: "=r"(a0), "=r"(a1) : : ); \
+		MAKE_PC_FROM_RA(a0, a1); })
+#ifdef CONFIG_FRAME_POINTER
+extern unsigned long return_address(unsigned level);
+#define CALLER_ADDR1 return_address(1)
+#define CALLER_ADDR2 return_address(2)
+#define CALLER_ADDR3 return_address(3)
+#else
+#define CALLER_ADDR1 (0)
+#define CALLER_ADDR2 (0)
+#define CALLER_ADDR3 (0)
+#endif
+
+#endif /* _XTENSA_FTRACE_H */
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index e1f8ba4061ed..722553f17db3 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -23,6 +23,9 @@
 #ifndef _XTENSA_INITIALIZE_MMU_H
 #define _XTENSA_INITIALIZE_MMU_H
 
+#include <asm/pgtable.h>
+#include <asm/vectors.h>
+
 #ifdef __ASSEMBLY__
 
 #define XTENSA_HWVERSION_RC_2009_0 230000
@@ -48,6 +51,110 @@
 	 * (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
 	 */
 
+#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+/*
+ * Have MMU v3
+ */
+
+#if !XCHAL_HAVE_VECBASE
+# error "MMU v3 requires reloc vectors"
+#endif
+
+	movi	a1, 0
+	_call0	1f
+	_j	2f
+
+	.align	4
+1:	movi	a2, 0x10000000
+	movi	a3, 0x18000000
+	add	a2, a2, a0
+9:	bgeu	a2, a3, 9b	/* PC is out of the expected range */
+
+	/* Step 1: invalidate mapping at 0x40000000..0x5FFFFFFF. */
+
+	movi	a2, 0x40000006
+	idtlb	a2
+	iitlb	a2
+	isync
+
+	/* Step 2: map 0x40000000..0x47FFFFFF to paddr containing this code
+	 * and jump to the new mapping.
+	 */
+#define CA_BYPASS	(_PAGE_CA_BYPASS | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
+#define CA_WRITEBACK	(_PAGE_CA_WB     | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
+
+	srli	a3, a0, 27
+	slli	a3, a3, 27
+	addi	a3, a3, CA_BYPASS
+	addi	a7, a2, -1
+	wdtlb	a3, a7
+	witlb	a3, a7
+	isync
+
+	slli	a4, a0, 5
+	srli	a4, a4, 5
+	addi	a5, a2, -6
+	add	a4, a4, a5
+	jx	a4
+
+	/* Step 3: unmap everything other than current area.
+	 *	   Start at 0x60000000, wrap around, and end with 0x20000000
+	 */
+2:	movi	a4, 0x20000000
+	add	a5, a2, a4
+3:	idtlb	a5
+	iitlb	a5
+	add	a5, a5, a4
+	bne	a5, a2, 3b
+
+	/* Step 4: Setup MMU with the old V2 mappings. */
+	movi	a6, 0x01000000
+	wsr	a6, ITLBCFG
+	wsr	a6, DTLBCFG
+	isync
+
+	movi	a5, 0xd0000005
+	movi	a4, CA_WRITEBACK
+	wdtlb	a4, a5
+	witlb	a4, a5
+
+	movi	a5, 0xd8000005
+	movi	a4, CA_BYPASS
+	wdtlb	a4, a5
+	witlb	a4, a5
+
+	movi	a5, 0xe0000006
+	movi	a4, 0xf0000000 + CA_WRITEBACK
+	wdtlb	a4, a5
+	witlb	a4, a5
+
+	movi	a5, 0xf0000006
+	movi	a4, 0xf0000000 + CA_BYPASS
+	wdtlb	a4, a5
+	witlb	a4, a5
+
+	isync
+
+	/* Jump to self, using MMU v2 mappings. */
+	movi	a4, 1f
+	jx	a4
+
+1:
+	movi    a2, VECBASE_RESET_VADDR
+	wsr	a2, vecbase
+
+	/* Step 5: remove temporary mapping. */
+	idtlb	a7
+	iitlb	a7
+	isync
+
+	movi	a0, 0
+	wsr	a0, ptevaddr
+	rsync
+
+#endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
+	  XCHAL_HAVE_SPANNING_WAY */
+
 	.endm
 
 #endif /*__ASSEMBLY__*/
diff --git a/arch/xtensa/include/asm/irqflags.h b/arch/xtensa/include/asm/irqflags.h
index f865b1c1eae4..ea36674c6ec5 100644
--- a/arch/xtensa/include/asm/irqflags.h
+++ b/arch/xtensa/include/asm/irqflags.h
@@ -47,7 +47,10 @@ static inline void arch_local_irq_restore(unsigned long flags)
 
 static inline bool arch_irqs_disabled_flags(unsigned long flags)
 {
-	return (flags & 0xf) != 0;
+#if XCHAL_EXCM_LEVEL < LOCKLEVEL || (1 << PS_EXCM_BIT) < LOCKLEVEL
+#error "XCHAL_EXCM_LEVEL and 1<<PS_EXCM_BIT must be no less than LOCKLEVEL"
+#endif
+	return (flags & (PS_INTLEVEL_MASK | (1 << PS_EXCM_BIT))) >= LOCKLEVEL;
 }
 
 static inline bool arch_irqs_disabled(void)
diff --git a/arch/xtensa/include/asm/linkage.h b/arch/xtensa/include/asm/linkage.h
deleted file mode 100644
index bf2128a99d79..000000000000
--- a/arch/xtensa/include/asm/linkage.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-xtensa/linkage.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_LINKAGE_H
-#define _XTENSA_LINKAGE_H
-
-/* Nothing to do here ... */
-
-#endif	/* _XTENSA_LINKAGE_H */
diff --git a/arch/xtensa/include/asm/stacktrace.h b/arch/xtensa/include/asm/stacktrace.h
new file mode 100644
index 000000000000..6a05fcb0a20d
--- /dev/null
+++ b/arch/xtensa/include/asm/stacktrace.h
@@ -0,0 +1,36 @@
+/*
+ * arch/xtensa/include/asm/stacktrace.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2013 Tensilica Inc.
+ */
+#ifndef _XTENSA_STACKTRACE_H
+#define _XTENSA_STACKTRACE_H
+
+#include <linux/sched.h>
+
+struct stackframe {
+	unsigned long pc;
+	unsigned long sp;
+};
+
+static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+{
+	unsigned long *sp;
+
+	if (!task || task == current)
+		__asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+	else
+		sp = (unsigned long *)task->thread.sp;
+
+	return sp;
+}
+
+void walk_stackframe(unsigned long *sp,
+		int (*fn)(struct stackframe *frame, void *data),
+		void *data);
+
+#endif /* _XTENSA_STACKTRACE_H */
diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index 9e85ce8bd8dd..3d35e5d0367e 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -19,13 +19,16 @@
 #define _INTLEVEL(x)	XCHAL_INT ## x ## _LEVEL
 #define INTLEVEL(x)	_INTLEVEL(x)
 
-#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) <= XCHAL_EXCM_LEVEL
+#if XCHAL_NUM_TIMERS > 0 && \
+	INTLEVEL(XCHAL_TIMER0_INTERRUPT) <= XCHAL_EXCM_LEVEL
 # define LINUX_TIMER     0
 # define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT
-#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) <= XCHAL_EXCM_LEVEL
+#elif XCHAL_NUM_TIMERS > 1 && \
+	INTLEVEL(XCHAL_TIMER1_INTERRUPT) <= XCHAL_EXCM_LEVEL
 # define LINUX_TIMER     1
 # define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT
-#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) <= XCHAL_EXCM_LEVEL
+#elif XCHAL_NUM_TIMERS > 2 && \
+	INTLEVEL(XCHAL_TIMER2_INTERRUPT) <= XCHAL_EXCM_LEVEL
 # define LINUX_TIMER     2
 # define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT
 #else
diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h
index b5464ef3cf66..917488a0ab00 100644
--- a/arch/xtensa/include/asm/traps.h
+++ b/arch/xtensa/include/asm/traps.h
@@ -22,10 +22,9 @@ extern void do_unhandled(struct pt_regs *regs, unsigned long exccause);
 
 static inline void spill_registers(void)
 {
-	unsigned int a0, ps;
 
 	__asm__ __volatile__ (
-		"movi	a14, " __stringify(PS_EXCM_BIT | LOCKLEVEL) "\n\t"
+		"movi	a14, "__stringify((1 << PS_EXCM_BIT) | LOCKLEVEL)"\n\t"
 		"mov	a12, a0\n\t"
 		"rsr	a13, sar\n\t"
 		"xsr	a14, ps\n\t"
@@ -35,7 +34,7 @@ static inline void spill_registers(void)
 		"mov	a0, a12\n\t"
 		"wsr	a13, sar\n\t"
 		"wsr	a14, ps\n\t"
-		: : "a" (&a0), "a" (&ps)
+		: :
 #if defined(CONFIG_FRAME_POINTER)
 		: "a2", "a3", "a4",       "a11", "a12", "a13", "a14", "a15",
 #else
diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h
new file mode 100644
index 000000000000..c52b656d0310
--- /dev/null
+++ b/arch/xtensa/include/asm/vectors.h
@@ -0,0 +1,125 @@
+/*
+ * arch/xtensa/include/asm/xchal_vaddr_remap.h
+ *
+ * Xtensa macros for MMU V3 Support. Deals with re-mapping the Virtual
+ * Memory Addresses from "Virtual == Physical" to their prevvious V2 MMU
+ * mappings (KSEG at 0xD0000000 and KIO at 0XF0000000).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 - 2012 Tensilica Inc.
+ *
+ * Pete Delaney <piet@tensilica.com>
+ * Marc Gauthier <marc@tensilica.com
+ */
+
+#ifndef _XTENSA_VECTORS_H
+#define _XTENSA_VECTORS_H
+
+#include <variant/core.h>
+
+#if defined(CONFIG_MMU)
+
+/* Will Become VECBASE */
+#define VIRTUAL_MEMORY_ADDRESS		0xD0000000
+
+/* Image Virtual Start Address */
+#define KERNELOFFSET			0xD0003000
+
+#if defined(XCHAL_HAVE_PTP_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+  /* MMU v3  - XCHAL_HAVE_PTP_MMU  == 1 */
+  #define PHYSICAL_MEMORY_ADDRESS	0x00000000
+  #define LOAD_MEMORY_ADDRESS		0x00003000
+#else
+  /* MMU V2 -  XCHAL_HAVE_PTP_MMU  == 0 */
+  #define PHYSICAL_MEMORY_ADDRESS	0xD0000000
+  #define LOAD_MEMORY_ADDRESS		0xD0003000
+#endif
+
+#else /* !defined(CONFIG_MMU) */
+  /* MMU Not being used - Virtual == Physical */
+
+  /* VECBASE */
+  #define VIRTUAL_MEMORY_ADDRESS	0x00002000
+
+  /* Location of the start of the kernel text, _start */
+  #define KERNELOFFSET			0x00003000
+  #define PHYSICAL_MEMORY_ADDRESS	0x00000000
+
+  /* Loaded just above possibly live vectors */
+  #define LOAD_MEMORY_ADDRESS		0x00003000
+
+#endif /* CONFIG_MMU */
+
+#define XC_VADDR(offset)		(VIRTUAL_MEMORY_ADDRESS  + offset)
+#define XC_PADDR(offset)		(PHYSICAL_MEMORY_ADDRESS + offset)
+
+/* Used to set VECBASE register */
+#define VECBASE_RESET_VADDR		VIRTUAL_MEMORY_ADDRESS
+
+#define RESET_VECTOR_VECOFS		(XCHAL_RESET_VECTOR_VADDR - \
+						VECBASE_RESET_VADDR)
+#define RESET_VECTOR_VADDR		XC_VADDR(RESET_VECTOR_VECOFS)
+
+#define RESET_VECTOR1_VECOFS		(XCHAL_RESET_VECTOR1_VADDR - \
+						VECBASE_RESET_VADDR)
+#define RESET_VECTOR1_VADDR		XC_VADDR(RESET_VECTOR1_VECOFS)
+
+#if XCHAL_HAVE_VECBASE
+
+#define USER_VECTOR_VADDR		XC_VADDR(XCHAL_USER_VECOFS)
+#define KERNEL_VECTOR_VADDR		XC_VADDR(XCHAL_KERNEL_VECOFS)
+#define DOUBLEEXC_VECTOR_VADDR		XC_VADDR(XCHAL_DOUBLEEXC_VECOFS)
+#define WINDOW_VECTORS_VADDR		XC_VADDR(XCHAL_WINDOW_OF4_VECOFS)
+#define INTLEVEL2_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL2_VECOFS)
+#define INTLEVEL3_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL3_VECOFS)
+#define INTLEVEL4_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL4_VECOFS)
+#define INTLEVEL5_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL5_VECOFS)
+#define INTLEVEL6_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL6_VECOFS)
+
+#define DEBUG_VECTOR_VADDR		XC_VADDR(XCHAL_DEBUG_VECOFS)
+
+#undef  XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_NMI_VECTOR_VADDR		XC_VADDR(XCHAL_NMI_VECOFS)
+
+#undef  XCHAL_INTLEVEL7_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XC_VADDR(XCHAL_INTLEVEL7_VECOFS)
+
+/*
+ * These XCHAL_* #defines from varian/core.h
+ * are not valid to use with V3 MMU. Non-XCHAL
+ * constants are defined above and should be used.
+ */
+#undef  XCHAL_VECBASE_RESET_VADDR
+#undef  XCHAL_RESET_VECTOR0_VADDR
+#undef  XCHAL_USER_VECTOR_VADDR
+#undef  XCHAL_KERNEL_VECTOR_VADDR
+#undef  XCHAL_DOUBLEEXC_VECTOR_VADDR
+#undef  XCHAL_WINDOW_VECTORS_VADDR
+#undef  XCHAL_INTLEVEL2_VECTOR_VADDR
+#undef  XCHAL_INTLEVEL3_VECTOR_VADDR
+#undef  XCHAL_INTLEVEL4_VECTOR_VADDR
+#undef  XCHAL_INTLEVEL5_VECTOR_VADDR
+#undef  XCHAL_INTLEVEL6_VECTOR_VADDR
+#undef  XCHAL_DEBUG_VECTOR_VADDR
+#undef  XCHAL_NMI_VECTOR_VADDR
+#undef  XCHAL_INTLEVEL7_VECTOR_VADDR
+
+#else
+
+#define USER_VECTOR_VADDR		XCHAL_USER_VECTOR_VADDR
+#define KERNEL_VECTOR_VADDR		XCHAL_KERNEL_VECTOR_VADDR
+#define DOUBLEEXC_VECTOR_VADDR		XCHAL_DOUBLEEXC_VECTOR_VADDR
+#define WINDOW_VECTORS_VADDR		XCHAL_WINDOW_VECTORS_VADDR
+#define INTLEVEL2_VECTOR_VADDR		XCHAL_INTLEVEL2_VECTOR_VADDR
+#define INTLEVEL3_VECTOR_VADDR		XCHAL_INTLEVEL3_VECTOR_VADDR
+#define INTLEVEL4_VECTOR_VADDR		XCHAL_INTLEVEL4_VECTOR_VADDR
+#define INTLEVEL5_VECTOR_VADDR		XCHAL_INTLEVEL5_VECTOR_VADDR
+#define INTLEVEL6_VECTOR_VADDR		XCHAL_INTLEVEL6_VECTOR_VADDR
+#define DEBUG_VECTOR_VADDR		XCHAL_DEBUG_VECTOR_VADDR
+
+#endif
+
+#endif /* _XTENSA_VECTORS_H */
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index c3a59d992ac0..1e7fc87a94bb 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -4,14 +4,16 @@
 
 extra-y := head.o vmlinux.lds
 
-obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
-	 setup.o signal.o syscall.o time.o traps.o vectors.o platform.o  \
-	 pci-dma.o
+obj-y := align.o coprocessor.o entry.o irq.o pci-dma.o platform.o process.o \
+	 ptrace.o setup.o signal.o stacktrace.o syscall.o time.o traps.o \
+	 vectors.o
 
 obj-$(CONFIG_KGDB) += xtensa-stub.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
 
+AFLAGS_head.o += -mtext-section-literals
+
 # In the Xtensa architecture, assembly generates literals which must always
 # precede the L32R instruction with a relative offset less than 256 kB.
 # Therefore, the .text and .literal section must be combined in parenthesis
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 63845f950792..5082507d5631 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -354,16 +354,16 @@ common_exception:
 	 * so we can allow exceptions and interrupts (*) again.
 	 * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X)
 	 *
-	 * (*) We only allow interrupts of higher priority than current IRQ
+	 * (*) We only allow interrupts if they were previously enabled and
+	 *     we're not handling an IRQ
 	 */
 
 	rsr	a3, ps
-	addi	a0, a0, -4
-	movi	a2, 1
+	addi	a0, a0, -EXCCAUSE_LEVEL1_INTERRUPT
+	movi	a2, LOCKLEVEL
 	extui	a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
 					# a3 = PS.INTLEVEL
-	movnez	a2, a3, a3		# a2 = 1: level-1, > 1: high priority
-	moveqz	a3, a2, a0		# a3 = IRQ level iff interrupt
+	moveqz	a3, a2, a0		# a3 = LOCKLEVEL iff interrupt
 	movi	a2, 1 << PS_WOE_BIT
 	or	a3, a3, a2
 	rsr	a0, exccause
@@ -389,6 +389,22 @@ common_exception:
 
 	save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
 	
+#ifdef CONFIG_TRACE_IRQFLAGS
+	l32i	a4, a1, PT_DEPC
+	/* Double exception means we came here with an exception
+	 * while PS.EXCM was set, i.e. interrupts disabled.
+	 */
+	bgeui	a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+	l32i	a4, a1, PT_EXCCAUSE
+	bnei	a4, EXCCAUSE_LEVEL1_INTERRUPT, 1f
+	/* We came here with an interrupt means interrupts were enabled
+	 * and we've just disabled them.
+	 */
+	movi	a4, trace_hardirqs_off
+	callx4	a4
+1:
+#endif
+
 	/* Go to second-level dispatcher. Set up parameters to pass to the
 	 * exception handler and call the exception handler.
 	 */
@@ -407,11 +423,29 @@ common_exception:
 	.global common_exception_return
 common_exception_return:
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	l32i	a4, a1, PT_DEPC
+	/* Double exception means we came here with an exception
+	 * while PS.EXCM was set, i.e. interrupts disabled.
+	 */
+	bgeui	a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+	l32i	a4, a1, PT_EXCCAUSE
+	bnei	a4, EXCCAUSE_LEVEL1_INTERRUPT, 1f
+	/* We came here with an interrupt means interrupts were enabled
+	 * and we'll reenable them on return.
+	 */
+	movi	a4, trace_hardirqs_on
+	callx4	a4
+1:
+#endif
+
 	/* Jump if we are returning from kernel exceptions. */
 
 1:	l32i	a3, a1, PT_PS
 	_bbci.l	a3, PS_UM_BIT, 4f
 
+	rsil	a2, 0
+
 	/* Specific to a user exception exit:
 	 * We need to check some flags for signal handling and rescheduling,
 	 * and have to restore WB and WS, extra states, and all registers
@@ -652,51 +686,19 @@ common_exception_exit:
 
 	l32i	a0, a1, PT_DEPC
 	l32i	a3, a1, PT_AREG3
-	_bltui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
-
-	wsr	a0, depc
 	l32i	a2, a1, PT_AREG2
-	l32i	a0, a1, PT_AREG0
-	l32i	a1, a1, PT_AREG1
-	rfde
+	_bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
 
-1:
 	/* Restore a0...a3 and return */
 
-	rsr	a0, ps
-	extui	a2, a0, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
-	movi	a0, 2f
-	slli	a2, a2, 4
-	add	a0, a2, a0
-	l32i	a2, a1, PT_AREG2
-	jx	a0
-
-	.macro	irq_exit_level level
-	.align	16
-	.if	XCHAL_EXCM_LEVEL >= \level
-	l32i	a0, a1, PT_PC
-	wsr	a0, epc\level
 	l32i	a0, a1, PT_AREG0
 	l32i	a1, a1, PT_AREG1
-	rfi	\level
-	.endif
-	.endm
+	rfe
 
-	.align	16
-2:
+1: 	wsr	a0, depc
 	l32i	a0, a1, PT_AREG0
 	l32i	a1, a1, PT_AREG1
-	rfe
-
-	.align	16
-	/* no rfi for level-1 irq, handled by rfe above*/
-	nop
-
-	irq_exit_level 2
-	irq_exit_level 3
-	irq_exit_level 4
-	irq_exit_level 5
-	irq_exit_level 6
+	rfde
 
 ENDPROC(kernel_exception)
 
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index df88f98737f4..ef12c0e6fa25 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -48,17 +48,36 @@
 	 */
 
 	__HEAD
+	.begin	no-absolute-literals
+
 ENTRY(_start)
 
-	_j	2f
+	/* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
+	wsr     a2, excsave1
+	_j	_SetupMMU
+
+	.align	4
+	.literal_position
+.Lstartup:
+	.word	_startup
+
 	.align	4
-1:	.word	_startup
-2:	l32r	a0, 1b
+	.global _SetupMMU
+_SetupMMU:
+	Offset = _SetupMMU - _start
+
+#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	initialize_mmu
+#endif
+	.end	no-absolute-literals
+
+	l32r	a0, .Lstartup
 	jx	a0
 
 ENDPROC(_start)
 
-	.section .init.text, "ax"
+	__INIT
+	.literal_position
 
 ENTRY(_startup)
 
@@ -67,10 +86,6 @@ ENTRY(_startup)
 	movi	a0, LOCKLEVEL
 	wsr	a0, ps
 
-	/* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
-
-	wsr	a2, excsave1
-
 	/* Start with a fresh windowbase and windowstart.  */
 
 	movi	a1, 1
@@ -86,7 +101,9 @@ ENTRY(_startup)
 	/* Clear debugging registers. */
 
 #if XCHAL_HAVE_DEBUG
+#if XCHAL_NUM_IBREAK > 0
 	wsr	a0, ibreakenable
+#endif
 	wsr	a0, icount
 	movi	a1, 15
 	wsr	a0, icountlevel
@@ -156,8 +173,6 @@ ENTRY(_startup)
 
 	isync
 
-	initialize_mmu
-
 	/* Unpack data sections
 	 *
 	 * The linker script used to build the Linux kernel image
@@ -205,6 +220,10 @@ ENTRY(_startup)
 
 	___flush_dcache_all a2 a3
 #endif
+	memw
+	isync
+	___invalidate_icache_all a2 a3
+	isync
 
 	/* Setup stack and enable window exceptions (keep irqs disabled) */
 
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index 44bf21c3769a..2bd6c351f37c 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -36,6 +36,7 @@ _F(void, power_off, (void), { while(1); });
 _F(void, idle, (void), { __asm__ __volatile__ ("waiti 0" ::: "memory"); });
 _F(void, heartbeat, (void), { });
 _F(int,  pcibios_fixup, (void), { return 0; });
+_F(void, pcibios_init, (void), { });
 
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 _F(void, calibrate_ccount, (void),
diff --git a/arch/xtensa/kernel/stacktrace.c b/arch/xtensa/kernel/stacktrace.c
new file mode 100644
index 000000000000..7d2c317bd98b
--- /dev/null
+++ b/arch/xtensa/kernel/stacktrace.c
@@ -0,0 +1,120 @@
+/*
+ * arch/xtensa/kernel/stacktrace.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2013 Tensilica Inc.
+ */
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+
+#include <asm/stacktrace.h>
+#include <asm/traps.h>
+
+void walk_stackframe(unsigned long *sp,
+		int (*fn)(struct stackframe *frame, void *data),
+		void *data)
+{
+	unsigned long a0, a1;
+	unsigned long sp_end;
+
+	a1 = (unsigned long)sp;
+	sp_end = ALIGN(a1, THREAD_SIZE);
+
+	spill_registers();
+
+	while (a1 < sp_end) {
+		struct stackframe frame;
+
+		sp = (unsigned long *)a1;
+
+		a0 = *(sp - 4);
+		a1 = *(sp - 3);
+
+		if (a1 <= (unsigned long)sp)
+			break;
+
+		frame.pc = MAKE_PC_FROM_RA(a0, a1);
+		frame.sp = a1;
+
+		if (fn(&frame, data))
+			return;
+	}
+}
+
+#ifdef CONFIG_STACKTRACE
+
+struct stack_trace_data {
+	struct stack_trace *trace;
+	unsigned skip;
+};
+
+static int stack_trace_cb(struct stackframe *frame, void *data)
+{
+	struct stack_trace_data *trace_data = data;
+	struct stack_trace *trace = trace_data->trace;
+
+	if (trace_data->skip) {
+		--trace_data->skip;
+		return 0;
+	}
+	if (!kernel_text_address(frame->pc))
+		return 0;
+
+	trace->entries[trace->nr_entries++] = frame->pc;
+	return trace->nr_entries >= trace->max_entries;
+}
+
+void save_stack_trace_tsk(struct task_struct *task, struct stack_trace *trace)
+{
+	struct stack_trace_data trace_data = {
+		.trace = trace,
+		.skip = trace->skip,
+	};
+	walk_stackframe(stack_pointer(task), stack_trace_cb, &trace_data);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	save_stack_trace_tsk(current, trace);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+#endif
+
+#ifdef CONFIG_FRAME_POINTER
+
+struct return_addr_data {
+	unsigned long addr;
+	unsigned skip;
+};
+
+static int return_address_cb(struct stackframe *frame, void *data)
+{
+	struct return_addr_data *r = data;
+
+	if (r->skip) {
+		--r->skip;
+		return 0;
+	}
+	if (!kernel_text_address(frame->pc))
+		return 0;
+	r->addr = frame->pc;
+	return 1;
+}
+
+unsigned long return_address(unsigned level)
+{
+	struct return_addr_data r = {
+		.skip = level + 1,
+	};
+	walk_stackframe(stack_pointer(NULL), return_address_cb, &r);
+	return r.addr;
+}
+EXPORT_SYMBOL(return_address);
+
+#endif
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index 458186dab5dc..3e8a05c874cd 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -11,7 +11,7 @@
  *
  * Essentially rewritten for the Xtensa architecture port.
  *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2013 Tensilica Inc.
  *
  * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
  * Chris Zankel	<chris@zankel.net>
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/hardirq.h>
 
+#include <asm/stacktrace.h>
 #include <asm/ptrace.h>
 #include <asm/timex.h>
 #include <asm/uaccess.h>
@@ -195,7 +196,6 @@ void do_multihit(struct pt_regs *regs, unsigned long exccause)
 
 /*
  * IRQ handler.
- * PS.INTLEVEL is the current IRQ priority level.
  */
 
 extern void do_IRQ(int, struct pt_regs *);
@@ -212,18 +212,21 @@ void do_interrupt(struct pt_regs *regs)
 		XCHAL_INTLEVEL6_MASK,
 		XCHAL_INTLEVEL7_MASK,
 	};
-	unsigned level = get_sr(ps) & PS_INTLEVEL_MASK;
-
-	if (WARN_ON_ONCE(level >= ARRAY_SIZE(int_level_mask)))
-		return;
 
 	for (;;) {
 		unsigned intread = get_sr(interrupt);
 		unsigned intenable = get_sr(intenable);
-		unsigned int_at_level = intread & intenable &
-			int_level_mask[level];
+		unsigned int_at_level = intread & intenable;
+		unsigned level;
+
+		for (level = LOCKLEVEL; level > 0; --level) {
+			if (int_at_level & int_level_mask[level]) {
+				int_at_level &= int_level_mask[level];
+				break;
+			}
+		}
 
-		if (!int_at_level)
+		if (level == 0)
 			return;
 
 		/*
@@ -404,53 +407,25 @@ void show_regs(struct pt_regs * regs)
 		       regs->syscall);
 }
 
-static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+static int show_trace_cb(struct stackframe *frame, void *data)
 {
-	unsigned long *sp;
-
-	if (!task || task == current)
-		__asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
-	else
-		sp = (unsigned long *)task->thread.sp;
-
-	return sp;
+	if (kernel_text_address(frame->pc)) {
+		printk(" [<%08lx>] ", frame->pc);
+		print_symbol("%s\n", frame->pc);
+	}
+	return 0;
 }
 
 void show_trace(struct task_struct *task, unsigned long *sp)
 {
-	unsigned long a0, a1, pc;
-	unsigned long sp_start, sp_end;
-
-	if (sp)
-		a1 = (unsigned long)sp;
-	else
-		a1 = (unsigned long)stack_pointer(task);
-
-	sp_start = a1 & ~(THREAD_SIZE-1);
-	sp_end = sp_start + THREAD_SIZE;
+	if (!sp)
+		sp = stack_pointer(task);
 
 	printk("Call Trace:");
 #ifdef CONFIG_KALLSYMS
 	printk("\n");
 #endif
-	spill_registers();
-
-	while (a1 > sp_start && a1 < sp_end) {
-		sp = (unsigned long*)a1;
-
-		a0 = *(sp - 4);
-		a1 = *(sp - 3);
-
-		if (a1 <= (unsigned long) sp)
-			break;
-
-		pc = MAKE_PC_FROM_RA(a0, a1);
-
-		if (kernel_text_address(pc)) {
-			printk(" [<%08lx>] ", pc);
-			print_symbol("%s\n", pc);
-		}
-	}
+	walk_stackframe(sp, show_trace_cb, NULL);
 	printk("\n");
 }
 
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index 82109b42e240..f9e175382aa9 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -50,6 +50,7 @@
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/thread_info.h>
+#include <asm/vectors.h>
 
 #define WINDOW_VECTORS_SIZE   0x180
 
@@ -220,7 +221,7 @@ ENTRY(_DoubleExceptionVector)
 
 	xsr	a0, depc		# get DEPC, save a0
 
-	movi	a3, XCHAL_WINDOW_VECTORS_VADDR
+	movi	a3, WINDOW_VECTORS_VADDR
 	_bltu	a0, a3, .Lfixup
 	addi	a3, a3, WINDOW_VECTORS_SIZE
 	_bgeu	a0, a3, .Lfixup
@@ -385,9 +386,12 @@ ENDPROC(_DebugInterruptVector)
 	.if	XCHAL_EXCM_LEVEL >= \level
 	.section .Level\level\()InterruptVector.text, "ax"
 ENTRY(_Level\level\()InterruptVector)
-	wsr	a0, epc1
+	wsr	a0, excsave2
 	rsr	a0, epc\level
-	xsr	a0, epc1
+	wsr	a0, epc1
+	movi	a0, EXCCAUSE_LEVEL1_INTERRUPT
+	wsr	a0, exccause
+	rsr	a0, eps\level
 					# branch to user or kernel vector
 	j	_SimulateUserKernelVectorException
 	.endif
@@ -439,10 +443,8 @@ ENDPROC(_WindowOverflow4)
 	 */
 	.align 4
 _SimulateUserKernelVectorException:
-	wsr	a0, excsave2
-	movi	a0, 4			# LEVEL1_INTERRUPT cause
-	wsr	a0, exccause
-	rsr	a0, ps
+	addi	a0, a0, (1 << PS_EXCM_BIT)
+	wsr	a0, ps
 	bbsi.l	a0, PS_UM_BIT, 1f	# branch if user mode
 	rsr	a0, excsave2		# restore a0
 	j	_KernelExceptionVector	# simulate kernel vector exception
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 14695240536d..21acd11b5df2 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -18,6 +18,7 @@
 #include <asm/page.h>
 #include <asm/thread_info.h>
 
+#include <asm/vectors.h>
 #include <variant/core.h>
 #include <platform/hardware.h>
 OUTPUT_ARCH(xtensa)
@@ -30,7 +31,7 @@ jiffies = jiffies_64;
 #endif
 
 #ifndef KERNELOFFSET
-#define KERNELOFFSET 0xd0001000
+#define KERNELOFFSET 0xd0003000
 #endif
 
 /* Note: In the following macros, it would be nice to specify only the
@@ -185,16 +186,16 @@ SECTIONS
 
   SECTION_VECTOR (_WindowVectors_text,
 		  .WindowVectors.text,
-		  XCHAL_WINDOW_VECTORS_VADDR, 4,
+		  WINDOW_VECTORS_VADDR, 4,
 		  .dummy)
   SECTION_VECTOR (_DebugInterruptVector_literal,
 		  .DebugInterruptVector.literal,
-		  XCHAL_DEBUG_VECTOR_VADDR - 4,
+		  DEBUG_VECTOR_VADDR - 4,
 		  SIZEOF(.WindowVectors.text),
 		  .WindowVectors.text)
   SECTION_VECTOR (_DebugInterruptVector_text,
 		  .DebugInterruptVector.text,
-		  XCHAL_DEBUG_VECTOR_VADDR,
+		  DEBUG_VECTOR_VADDR,
 		  4,
 		  .DebugInterruptVector.literal)
 #undef LAST
@@ -202,7 +203,7 @@ SECTIONS
 #if XCHAL_EXCM_LEVEL >= 2
   SECTION_VECTOR (_Level2InterruptVector_text,
 		  .Level2InterruptVector.text,
-		  XCHAL_INTLEVEL2_VECTOR_VADDR,
+		  INTLEVEL2_VECTOR_VADDR,
 		  SIZEOF(LAST), LAST)
 # undef LAST
 # define LAST	.Level2InterruptVector.text
@@ -210,7 +211,7 @@ SECTIONS
 #if XCHAL_EXCM_LEVEL >= 3
   SECTION_VECTOR (_Level3InterruptVector_text,
 		  .Level3InterruptVector.text,
-		  XCHAL_INTLEVEL3_VECTOR_VADDR,
+		  INTLEVEL3_VECTOR_VADDR,
 		  SIZEOF(LAST), LAST)
 # undef LAST
 # define LAST	.Level3InterruptVector.text
@@ -218,7 +219,7 @@ SECTIONS
 #if XCHAL_EXCM_LEVEL >= 4
   SECTION_VECTOR (_Level4InterruptVector_text,
 		  .Level4InterruptVector.text,
-		  XCHAL_INTLEVEL4_VECTOR_VADDR,
+		  INTLEVEL4_VECTOR_VADDR,
 		  SIZEOF(LAST), LAST)
 # undef LAST
 # define LAST	.Level4InterruptVector.text
@@ -226,7 +227,7 @@ SECTIONS
 #if XCHAL_EXCM_LEVEL >= 5
   SECTION_VECTOR (_Level5InterruptVector_text,
 		  .Level5InterruptVector.text,
-		  XCHAL_INTLEVEL5_VECTOR_VADDR,
+		  INTLEVEL5_VECTOR_VADDR,
 		  SIZEOF(LAST), LAST)
 # undef LAST
 # define LAST	.Level5InterruptVector.text
@@ -234,39 +235,39 @@ SECTIONS
 #if XCHAL_EXCM_LEVEL >= 6
   SECTION_VECTOR (_Level6InterruptVector_text,
 		  .Level6InterruptVector.text,
-		  XCHAL_INTLEVEL6_VECTOR_VADDR,
+		  INTLEVEL6_VECTOR_VADDR,
 		  SIZEOF(LAST), LAST)
 # undef LAST
 # define LAST	.Level6InterruptVector.text
 #endif
   SECTION_VECTOR (_KernelExceptionVector_literal,
 		  .KernelExceptionVector.literal,
-		  XCHAL_KERNEL_VECTOR_VADDR - 4,
+		  KERNEL_VECTOR_VADDR - 4,
 		  SIZEOF(LAST), LAST)
 #undef LAST
   SECTION_VECTOR (_KernelExceptionVector_text,
 		  .KernelExceptionVector.text,
-		  XCHAL_KERNEL_VECTOR_VADDR,
+		  KERNEL_VECTOR_VADDR,
 		  4,
 		  .KernelExceptionVector.literal)
   SECTION_VECTOR (_UserExceptionVector_literal,
 		  .UserExceptionVector.literal,
-		  XCHAL_USER_VECTOR_VADDR - 4,
+		  USER_VECTOR_VADDR - 4,
 		  SIZEOF(.KernelExceptionVector.text),
 		  .KernelExceptionVector.text)
   SECTION_VECTOR (_UserExceptionVector_text,
 		  .UserExceptionVector.text,
-		  XCHAL_USER_VECTOR_VADDR,
+		  USER_VECTOR_VADDR,
 		  4,
 		  .UserExceptionVector.literal)
   SECTION_VECTOR (_DoubleExceptionVector_literal,
 		  .DoubleExceptionVector.literal,
-		  XCHAL_DOUBLEEXC_VECTOR_VADDR - 16,
+		  DOUBLEEXC_VECTOR_VADDR - 16,
 		  SIZEOF(.UserExceptionVector.text),
 		  .UserExceptionVector.text)
   SECTION_VECTOR (_DoubleExceptionVector_text,
 		  .DoubleExceptionVector.text,
-		  XCHAL_DOUBLEEXC_VECTOR_VADDR,
+		  DOUBLEEXC_VECTOR_VADDR,
 		  32,
 		  .DoubleExceptionVector.literal)
 
@@ -284,11 +285,26 @@ SECTIONS
   . = ALIGN(0x10);
   .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) }
 
-  .ResetVector.text XCHAL_RESET_VECTOR_VADDR :
+  .ResetVector.text RESET_VECTOR_VADDR :
   {
     *(.ResetVector.text)
   }
 
+
+  /*
+   * This is a remapped copy of the Secondary Reset Vector Code.
+   * It keeps gdb in sync with the PC after switching
+   * to the temporary mapping used while setting up
+   * the V2 MMU mappings for Linux.
+   *
+   * Only debug information about this section is put in the kernel image.
+   */
+  .SecondaryResetVector.remapped_text 0x46000000 (INFO):
+  {
+	*(.SecondaryResetVector.remapped_text)
+  }
+
+
   .xt.lit : { *(.xt.lit) }
   .xt.prop : { *(.xt.prop) }
 
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index afe058b24e6e..42c53c87c204 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -119,3 +119,8 @@ EXPORT_SYMBOL(outsl);
 EXPORT_SYMBOL(insb);
 EXPORT_SYMBOL(insw);
 EXPORT_SYMBOL(insl);
+
+extern long common_exception_return;
+extern long _spill_registers;
+EXPORT_SYMBOL(common_exception_return);
+EXPORT_SYMBOL(_spill_registers);
diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c
index 0f77f9d3bb8b..a1077570e383 100644
--- a/arch/xtensa/mm/mmu.c
+++ b/arch/xtensa/mm/mmu.c
@@ -24,15 +24,19 @@ void __init paging_init(void)
  */
 void __init init_mmu(void)
 {
-	/* Writing zeros to the <t>TLBCFG special registers ensure
-	 * that valid values exist in the register.  For existing
-	 * PGSZID<w> fields, zero selects the first element of the
-	 * page-size array.  For nonexistent PGSZID<w> fields, zero is
-	 * the best value to write.  Also, when changing PGSZID<w>
+#if !(XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY)
+	/*
+	 * Writing zeros to the instruction and data TLBCFG special
+	 * registers ensure that valid values exist in the register.
+	 *
+	 * For existing PGSZID<w> fields, zero selects the first element
+	 * of the page-size array.  For nonexistent PGSZID<w> fields,
+	 * zero is the best value to write.  Also, when changing PGSZID<w>
 	 * fields, the corresponding TLB must be flushed.
 	 */
 	set_itlbcfg_register(0);
 	set_dtlbcfg_register(0);
+#endif
 	flush_tlb_all();
 
 	/* Set rasid register to a known value. */
diff --git a/arch/xtensa/oprofile/backtrace.c b/arch/xtensa/oprofile/backtrace.c
index 66f32ee2c982..5f03a593d84f 100644
--- a/arch/xtensa/oprofile/backtrace.c
+++ b/arch/xtensa/oprofile/backtrace.c
@@ -132,9 +132,7 @@ static void xtensa_backtrace_kernel(struct pt_regs *regs, unsigned int depth)
 		pc = MAKE_PC_FROM_RA(a0, pc);
 
 		/* Add the PC to the trace. */
-		if (kernel_text_address(pc))
-			oprofile_add_trace(pc);
-
+		oprofile_add_trace(pc);
 		if (pc == (unsigned long) &common_exception_return) {
 			regs = (struct pt_regs *)a1;
 			if (user_mode(regs)) {
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index da9866f7fecf..70cb408bc20d 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -56,13 +56,13 @@ static void rs_poll(unsigned long);
 static int rs_open(struct tty_struct *tty, struct file * filp)
 {
 	tty->port = &serial_port;
-	spin_lock(&timer_lock);
+	spin_lock_bh(&timer_lock);
 	if (tty->count == 1) {
 		setup_timer(&serial_timer, rs_poll,
 				(unsigned long)&serial_port);
 		mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
 	}
-	spin_unlock(&timer_lock);
+	spin_unlock_bh(&timer_lock);
 
 	return 0;
 }
@@ -99,14 +99,13 @@ static int rs_write(struct tty_struct * tty,
 static void rs_poll(unsigned long priv)
 {
 	struct tty_port *port = (struct tty_port *)priv;
-	struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
 	int i = 0;
 	unsigned char c;
 
 	spin_lock(&timer_lock);
 
-	while (__simc(SYS_select_one, 0, XTISS_SELECT_ONE_READ, (int)&tv,0,0)){
-		__simc (SYS_read, 0, (unsigned long)&c, 1, 0, 0);
+	while (simc_poll(0)) {
+		simc_read(0, &c, 1);
 		tty_insert_flip_char(port, c, TTY_NORMAL);
 		i++;
 	}
@@ -244,8 +243,7 @@ static void iss_console_write(struct console *co, const char *s, unsigned count)
 	int len = strlen(s);
 
 	if (s != 0 && *s != 0)
-		__simc (SYS_write, 1, (unsigned long)s,
-			count < len ? count : len,0,0);
+		simc_write(1, s, count < len ? count : len);
 }
 
 static struct tty_driver* iss_console_device(struct console *c, int *index)
diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h
index b5a4edf02d76..12b15ad1e586 100644
--- a/arch/xtensa/platforms/iss/include/platform/simcall.h
+++ b/arch/xtensa/platforms/iss/include/platform/simcall.h
@@ -59,56 +59,58 @@
 
 static int errno;
 
-static inline int __simc(int a, int b, int c, int d, int e, int f)
+static inline int __simc(int a, int b, int c, int d)
 {
 	int ret;
 	register int a1 asm("a2") = a;
 	register int b1 asm("a3") = b;
 	register int c1 asm("a4") = c;
 	register int d1 asm("a5") = d;
-	register int e1 asm("a6") = e;
-	register int f1 asm("a7") = f;
 	__asm__ __volatile__ (
 			"simcall\n"
 			"mov %0, a2\n"
 			"mov %1, a3\n"
 			: "=a" (ret), "=a" (errno), "+r"(a1), "+r"(b1)
-			: "r"(c1), "r"(d1), "r"(e1), "r"(f1)
+			: "r"(c1), "r"(d1)
 			: "memory");
 	return ret;
 }
 
 static inline int simc_open(const char *file, int flags, int mode)
 {
-	return __simc(SYS_open, (int) file, flags, mode, 0, 0);
+	return __simc(SYS_open, (int) file, flags, mode);
 }
 
 static inline int simc_close(int fd)
 {
-	return __simc(SYS_close, fd, 0, 0, 0, 0);
+	return __simc(SYS_close, fd, 0, 0);
 }
 
 static inline int simc_ioctl(int fd, int request, void *arg)
 {
-	return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0);
+	return __simc(SYS_ioctl, fd, request, (int) arg);
 }
 
 static inline int simc_read(int fd, void *buf, size_t count)
 {
-	return __simc(SYS_read, fd, (int) buf, count, 0, 0);
+	return __simc(SYS_read, fd, (int) buf, count);
 }
 
 static inline int simc_write(int fd, const void *buf, size_t count)
 {
-	return __simc(SYS_write, fd, (int) buf, count, 0, 0);
+	return __simc(SYS_write, fd, (int) buf, count);
 }
 
 static inline int simc_poll(int fd)
 {
 	struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
 
-	return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv,
-			0, 0);
+	return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv);
+}
+
+static inline int simc_lseek(int fd, uint32_t off, int whence)
+{
+	return __simc(SYS_lseek, fd, off, whence);
 }
 
 #endif /* _XTENSA_PLATFORM_ISS_SIMCALL_H */
diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c
index e1700102f35e..da7d18240866 100644
--- a/arch/xtensa/platforms/iss/setup.c
+++ b/arch/xtensa/platforms/iss/setup.c
@@ -38,12 +38,6 @@ void __init platform_init(bp_tag_t* bootparam)
 
 }
 
-#ifdef CONFIG_PCI
-void platform_pcibios_init(void)
-{
-}
-#endif
-
 void platform_halt(void)
 {
 	pr_info(" ** Called platform_halt() **\n");
@@ -64,7 +58,9 @@ void platform_restart(void)
 			     "wsr	a2, icountlevel\n\t"
 			     "movi	a2, 0\n\t"
 			     "wsr	a2, icount\n\t"
+#if XCHAL_NUM_IBREAK > 0
 			     "wsr	a2, ibreakenable\n\t"
+#endif
 			     "wsr	a2, lcount\n\t"
 			     "movi	a2, 0x1f\n\t"
 			     "wsr	a2, ps\n\t"
diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c
index fc3c91fd20f7..c0edb35424ce 100644
--- a/arch/xtensa/platforms/iss/simdisk.c
+++ b/arch/xtensa/platforms/iss/simdisk.c
@@ -85,7 +85,7 @@ static void simdisk_transfer(struct simdisk *dev, unsigned long sector,
 	while (nbytes > 0) {
 		unsigned long io;
 
-		__simc(SYS_lseek, dev->fd, offset, SEEK_SET, 0, 0);
+		simc_lseek(dev->fd, offset, SEEK_SET);
 		if (write)
 			io = simc_write(dev->fd, buffer, nbytes);
 		else
@@ -176,7 +176,7 @@ static int simdisk_attach(struct simdisk *dev, const char *filename)
 		err = -ENODEV;
 		goto out;
 	}
-	dev->size = __simc(SYS_lseek, dev->fd, 0, SEEK_END, 0, 0);
+	dev->size = simc_lseek(dev->fd, 0, SEEK_END);
 	set_capacity(dev->gd, dev->size >> SECTOR_SHIFT);
 	dev->filename = filename;
 	pr_info("SIMDISK: %s=%s\n", dev->gd->disk_name, dev->filename);
diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c
index c7d90f17886e..f9bc87966290 100644
--- a/arch/xtensa/platforms/xt2000/setup.c
+++ b/arch/xtensa/platforms/xt2000/setup.c
@@ -69,7 +69,9 @@ void platform_restart(void)
 			      "wsr	a2, icountlevel\n\t"
 			      "movi	a2, 0\n\t"
 			      "wsr	a2, icount\n\t"
+#if XCHAL_NUM_IBREAK > 0
 			      "wsr	a2, ibreakenable\n\t"
+#endif
 			      "wsr	a2, lcount\n\t"
 			      "movi	a2, 0x1f\n\t"
 			      "wsr	a2, ps\n\t"
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index 9d888a2a5755..96ef8eeb064e 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -60,7 +60,9 @@ void platform_restart(void)
 			      "wsr	a2, icountlevel\n\t"
 			      "movi	a2, 0\n\t"
 			      "wsr	a2, icount\n\t"
+#if XCHAL_NUM_IBREAK > 0
 			      "wsr	a2, ibreakenable\n\t"
+#endif
 			      "wsr	a2, lcount\n\t"
 			      "movi	a2, 0x1f\n\t"
 			      "wsr	a2, ps\n\t"