Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits)
  ACPICA: reduce table header messages to fit within 80 columns
  asus-laptop: merge with ACPICA table update
  ACPI: bay: Convert ACPI Bay driver to be compatible with sysfs update.
  ACPI: bay: new driver is EXPERIMENTAL
  ACPI: bay: make drive_bays static
  ACPI: bay: make bay a platform driver
  ACPI: bay: remove prototype procfs code
  ACPI: bay: delete unused variable
  ACPI: bay: new driver adding removable drive bay support
  ACPI: dock: check if parent is on dock
  ACPICA: fix gcc build warnings
  Altix: Add ACPI SSDT PCI device support (hotplug)
  Altix: ACPI SSDT PCI device support
  ACPICA: reduce conflicts with Altix patch series
  ACPI_NUMA: fix HP IA64 simulator issue with extended memory domain
  ACPI: fix HP RX2600 IA64 boot
  ACPI: build fix for IBM x440 - CONFIG_X86_SUMMIT
  ACPICA: Update version to 20070126
  ACPICA: Fix for incorrect parameter passed to AcpiTbDeleteTable during table load.
  ACPICA: Update copyright to 2007.
  ...

6 files changed, 54 insertions, 51 deletions

diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c
index 49802f1bee94..bd30d138113f 100644
--- a/arch/x86_64/kernel/early-quirks.c
+++ b/arch/x86_64/kernel/early-quirks.c
@@ -32,7 +32,7 @@ static void via_bugs(void)
 
 static int nvidia_hpet_detected __initdata;
 
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+static int __init nvidia_hpet_check(struct acpi_table_header *header)
 {
 	nvidia_hpet_detected = 1;
 	return 0;
@@ -53,7 +53,7 @@ static void nvidia_bugs(void)
 		return;
 
 	nvidia_hpet_detected = 0;
-	acpi_table_parse(ACPI_HPET, nvidia_hpet_check);
+	acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check);
 	if (nvidia_hpet_detected == 0) {
 		acpi_skip_timer_override = 1;
 		printk(KERN_INFO "Nvidia board "
diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c
index b007433f96bb..0b3603adf56d 100644
--- a/arch/x86_64/kernel/genapic.c
+++ b/arch/x86_64/kernel/genapic.c
@@ -58,8 +58,8 @@ void __init clustered_apic_check(void)
 	 * Some x86_64 machines use physical APIC mode regardless of how many
 	 * procs/clusters are present (x86_64 ES7000 is an example).
 	 */
-	if (acpi_fadt.revision > FADT2_REVISION_ID)
-		if (acpi_fadt.force_apic_physical_destination_mode) {
+	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID)
+		if (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) {
 			genapic = &apic_cluster;
 			goto print;
 		}
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 08072568847d..50dd8bef850e 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -798,7 +798,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		return gsi;
 
 	/* Don't set up the ACPI SCI because it's already set up */
-	if (acpi_fadt.sci_int == gsi)
+	if (acpi_gbl_FADT.sci_interrupt == gsi)
 		return gsi;
 
 	ioapic = mp_find_ioapic(gsi);
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 5cc76d0d331f..335cc91c49b7 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -498,7 +498,7 @@ static unsigned long get_cmos_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 	unsigned long flags;
-	unsigned extyear = 0;
+	unsigned century = 0;
 
 	spin_lock_irqsave(&rtc_lock, flags);
 
@@ -510,9 +510,9 @@ static unsigned long get_cmos_time(void)
 		mon = CMOS_READ(RTC_MONTH);
 		year = CMOS_READ(RTC_YEAR);
 #ifdef CONFIG_ACPI
-		if (acpi_fadt.revision >= FADT2_REVISION_ID &&
-					acpi_fadt.century)
-			extyear = CMOS_READ(acpi_fadt.century);
+		if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+					acpi_gbl_FADT.century)
+			century = CMOS_READ(acpi_gbl_FADT.century);
 #endif
 	} while (sec != CMOS_READ(RTC_SECONDS));
 
@@ -530,10 +530,10 @@ static unsigned long get_cmos_time(void)
 	BCD_TO_BIN(mon);
 	BCD_TO_BIN(year);
 
-	if (extyear) {
-		BCD_TO_BIN(extyear);
-		year += extyear;
-		printk(KERN_INFO "Extended CMOS year: %d\n", extyear);
+	if (century) {
+		BCD_TO_BIN(century);
+		year += century * 100;
+		printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
 	} else { 
 		/*
 		 * x86-64 systems only exists since 2002.
@@ -954,7 +954,7 @@ __cpuinit int unsynchronized_tsc(void)
  	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) {
 #ifdef CONFIG_ACPI
 		/* But TSC doesn't tick in C3 so don't use it there */
-		if (acpi_fadt.length > 0 && acpi_fadt.plvl3_lat < 1000)
+		if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000)
 			return 1;
 #endif
  		return 0;
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 1087e150a218..2efe215fc76a 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -101,7 +101,7 @@ static __init inline int srat_disabled(void)
 static __init int slit_valid(struct acpi_table_slit *slit)
 {
 	int i, j;
-	int d = slit->localities;
+	int d = slit->locality_count;
 	for (i = 0; i < d; i++) {
 		for (j = 0; j < d; j++)  {
 			u8 val = slit->entry[d*i + j];
@@ -127,18 +127,18 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
 
 /* Callback for Proximity Domain -> LAPIC mapping */
 void __init
-acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 {
 	int pxm, node;
 	if (srat_disabled())
 		return;
-	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {
+	if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
 		bad_srat();
 		return;
 	}
-	if (pa->flags.enabled == 0)
+	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
 		return;
-	pxm = pa->proximity_domain;
+	pxm = pa->proximity_domain_lo;
 	node = setup_node(pxm);
 	if (node < 0) {
 		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
@@ -254,21 +254,21 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end)
 	/* Looks good */
 
 	if (nd->start == nd->end) {
- 		nd->start = start;
- 		nd->end = end;
+		nd->start = start;
+		nd->end = end;
 		changed = 1;
- 	} else {
- 		if (nd->start == end) {
- 			nd->start = start;
+	} else {
+		if (nd->start == end) {
+			nd->start = start;
 			changed = 1;
 		}
- 		if (nd->end == start) {
- 			nd->end = end;
+		if (nd->end == start) {
+			nd->end = end;
 			changed = 1;
 		}
 		if (!changed)
 			printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
- 	}
+	}
 
 	ret = update_end_of_memory(nd->end);
 
@@ -279,7 +279,7 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end)
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
 void __init
-acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 {
 	struct bootnode *nd, oldnode;
 	unsigned long start, end;
@@ -288,16 +288,17 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 
 	if (srat_disabled())
 		return;
-	if (ma->header.length != sizeof(struct acpi_table_memory_affinity)) {
+	if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
 		bad_srat();
 		return;
 	}
-	if (ma->flags.enabled == 0)
+	if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
 		return;
- 	if (ma->flags.hot_pluggable && !save_add_info())
+
+	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
 		return;
-	start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
-	end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
+	start = ma->base_address;
+	end = start + ma->length;
 	pxm = ma->proximity_domain;
 	node = setup_node(pxm);
 	if (node < 0) {
@@ -337,7 +338,8 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 	push_node_boundaries(node, nd->start >> PAGE_SHIFT,
 						nd->end >> PAGE_SHIFT);
 
- 	if (ma->flags.hot_pluggable && (reserve_hotadd(node, start, end) < 0)) {
+	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) &&
+	    (reserve_hotadd(node, start, end) < 0)) {
 		/* Ignore hotadd region. Undo damage */
 		printk(KERN_NOTICE "SRAT: Hotplug region ignored\n");
 		*nd = oldnode;
@@ -394,7 +396,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 
 	/* First clean up the node list */
 	for (i = 0; i < MAX_NUMNODES; i++) {
- 		cutoff_node(i, start, end);
+		cutoff_node(i, start, end);
 		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
 			unparse_node(i);
 			node_set_offline(i);
@@ -426,7 +428,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		if (!node_online(i))
 			setup_node_bootmem(i, nodes[i].start, nodes[i].end);
 
-	for (i = 0; i < NR_CPUS; i++) { 
+	for (i = 0; i < NR_CPUS; i++) {
 		if (cpu_to_node[i] == NUMA_NO_NODE)
 			continue;
 		if (!node_isset(cpu_to_node[i], nodes_parsed))
@@ -461,7 +463,7 @@ int __node_distance(int a, int b)
 
 	if (!acpi_slit)
 		return a == b ? 10 : 20;
-	index = acpi_slit->localities * node_to_pxm(a);
+	index = acpi_slit->locality_count * node_to_pxm(a);
 	return acpi_slit->entry[index + node_to_pxm(b)];
 }
 
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index f8b6b2800a62..faabb6e87f12 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -1,6 +1,6 @@
 /*
  * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
- * 
+ *
  * This is an 64bit optimized version that always keeps the full mmconfig
  * space mapped. This allows lockless config space operation.
  */
@@ -25,7 +25,7 @@ static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS);
 
 /* Static virtual mapping of the MMCONFIG aperture */
 struct mmcfg_virt {
-	struct acpi_table_mcfg_config *cfg;
+	struct acpi_mcfg_allocation *cfg;
 	char __iomem *virt;
 };
 static struct mmcfg_virt *pci_mmcfg_virt;
@@ -33,14 +33,14 @@ static struct mmcfg_virt *pci_mmcfg_virt;
 static char __iomem *get_virt(unsigned int seg, unsigned bus)
 {
 	int cfg_num = -1;
-	struct acpi_table_mcfg_config *cfg;
+	struct acpi_mcfg_allocation *cfg;
 
 	while (1) {
 		++cfg_num;
 		if (cfg_num >= pci_mmcfg_config_num)
 			break;
 		cfg = pci_mmcfg_virt[cfg_num].cfg;
-		if (cfg->pci_segment_group_number != seg)
+		if (cfg->pci_segment != seg)
 			continue;
 		if ((cfg->start_bus_number <= bus) &&
 		    (cfg->end_bus_number >= bus))
@@ -52,7 +52,7 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus)
  	   this applies to all busses. */
 	cfg = &pci_mmcfg_config[0];
 	if (pci_mmcfg_config_num == 1 &&
-		cfg->pci_segment_group_number == 0 &&
+		cfg->pci_segment == 0 &&
 		(cfg->start_bus_number | cfg->end_bus_number) == 0)
 		return pci_mmcfg_virt[0].virt;
 
@@ -170,19 +170,19 @@ void __init pci_mmcfg_init(int type)
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return;
 
-	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
 	if ((pci_mmcfg_config_num == 0) ||
 	    (pci_mmcfg_config == NULL) ||
-	    (pci_mmcfg_config[0].base_address == 0))
+	    (pci_mmcfg_config[0].address == 0))
 		return;
 
 	/* Only do this check when type 1 works. If it doesn't work
            assume we run on a Mac and always use MCFG */
-	if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
-			pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+	if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address,
+			pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
 			E820_RESERVED)) {
-		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
-				pci_mmcfg_config[0].base_address);
+		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n",
+				(unsigned long)pci_mmcfg_config[0].address);
 		printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
 		return;
 	}
@@ -194,15 +194,16 @@ void __init pci_mmcfg_init(int type)
 	}
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
 		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
-		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
+		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address,
 							 MMCONFIG_APER_MAX);
 		if (!pci_mmcfg_virt[i].virt) {
 			printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
 					"segment %d\n",
-			       pci_mmcfg_config[i].pci_segment_group_number);
+				pci_mmcfg_config[i].pci_segment);
 			return;
 		}
-		printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
+		printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n",
+			(unsigned long)pci_mmcfg_config[i].address);
 	}
 
 	unreachable_devices();