diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-22 09:42:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-22 09:43:22 -0700 |
commit | 23904815461ba223a8baf7490051597fa054299b (patch) | |
tree | 2d52ce8ff18c4f731183d0b10048eb74489a3391 /arch/x86 | |
parent | 754b9800779402924fffe456b49d557e15260cbf (diff) | |
parent | fa63030e9c79e37b4d4e63b39ffb09cfb7aa0fe4 (diff) | |
download | linux-23904815461ba223a8baf7490051597fa054299b.tar.bz2 |
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform changes from Ingo Molnar.
Removes the Moorestown platform that nobody ever used.
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform: Move APIC ID validity check into platform APIC code
x86/olpc/xo15/sci: Enable lid close wakeup control
x86/geode/net5501: Add platform driver for Soekris Engineering net5501
x86/geode/alix2: Supplement driver to include GPIO button support
x86/mid/powerbtn: Use MSIC read/write instead of ipc_scu
x86/mid/thermal: Turn off thermistor
x86/mid/thermal: Add msic_thermal alias
x86/mid/thermal: Convert to use Intel MSIC API
x86/mid/scu_ipc: Remove Moorestown support
x86/mid: Kill off Moorestown
x86/mrst: Add msic_thermal platform support
x86/config: Select MSIC MFD driver on Intel Medfield platform
x86/mid: Remove Intel Moorestown
x86/mrst: Set ISA bus type for fake MP IRQs
x86/ioapic: Use legacy_pic to set correct gsi-irq mapping
Diffstat (limited to 'arch/x86')
-rw-r--r-- | arch/x86/Kconfig | 28 | ||||
-rw-r--r-- | arch/x86/include/asm/apic.h | 6 | ||||
-rw-r--r-- | arch/x86/include/asm/mrst.h | 4 | ||||
-rw-r--r-- | arch/x86/kernel/apic/apic_flat_64.c | 2 | ||||
-rw-r--r-- | arch/x86/kernel/apic/apic_noop.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/apic/apic_numachip.c | 10 | ||||
-rw-r--r-- | arch/x86/kernel/apic/bigsmp_32.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/apic/es7000_32.c | 2 | ||||
-rw-r--r-- | arch/x86/kernel/apic/numaq_32.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/apic/probe_32.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/apic/summit_32.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/apic/x2apic_cluster.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/apic/x2apic_phys.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/apic/x2apic_uv_x.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/smpboot.c | 2 | ||||
-rw-r--r-- | arch/x86/platform/geode/Makefile | 1 | ||||
-rw-r--r-- | arch/x86/platform/geode/alix.c | 76 | ||||
-rw-r--r-- | arch/x86/platform/geode/net5501.c | 154 | ||||
-rw-r--r-- | arch/x86/platform/mrst/Makefile | 1 | ||||
-rw-r--r-- | arch/x86/platform/mrst/mrst.c | 70 | ||||
-rw-r--r-- | arch/x86/platform/mrst/pmu.c | 817 | ||||
-rw-r--r-- | arch/x86/platform/mrst/pmu.h | 234 | ||||
-rw-r--r-- | arch/x86/platform/olpc/olpc-xo15-sci.c | 72 |
23 files changed, 360 insertions, 1127 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6c29256a71a6..901952355969 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -422,27 +422,6 @@ if X86_WANT_INTEL_MID config X86_INTEL_MID bool -config X86_MRST - bool "Moorestown MID platform" - depends on PCI - depends on PCI_GOANY - depends on X86_IO_APIC - select X86_INTEL_MID - select SFI - select DW_APB_TIMER - select APB_TIMER - select I2C - select SPI - select INTEL_SCU_IPC - select X86_PLATFORM_DEVICES - ---help--- - Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin - Internet Device(MID) platform. Moorestown consists of two chips: - Lincroft (CPU core, graphics, and memory controller) and Langwell IOH. - Unlike standard x86 PCs, Moorestown does not have many legacy devices - nor standard legacy replacement devices/features. e.g. Moorestown does - not contain i8259, i8254, HPET, legacy BIOS, most of the io ports. - config X86_MDFLD bool "Medfield MID platform" depends on PCI @@ -456,6 +435,7 @@ config X86_MDFLD select SPI select INTEL_SCU_IPC select X86_PLATFORM_DEVICES + select MFD_INTEL_MSIC ---help--- Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. @@ -2139,6 +2119,12 @@ config ALIX Note: You have to set alix.force=1 for boards with Award BIOS. +config NET5501 + bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)" + select GPIOLIB + ---help--- + This option enables system support for the Soekris Engineering net5501. + endif # X86_32 config AMD_NB diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 3ab9bdd87e79..a9371c91718c 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -288,6 +288,7 @@ struct apic { int (*probe)(void); int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id); + int (*apic_id_valid)(int apicid); int (*apic_id_registered)(void); u32 irq_delivery_mode; @@ -532,6 +533,11 @@ static inline unsigned int read_apic_id(void) return apic->get_apic_id(reg); } +static inline int default_apic_id_valid(int apicid) +{ + return x2apic_mode || (apicid < 255); +} + extern void default_setup_apic_routing(void); extern struct apic apic_noop; diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index 0a0a95460434..fc18bf3ce7c8 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -26,8 +26,8 @@ extern struct sfi_rtc_table_entry sfi_mrtc_array[]; * identified via MSRs. */ enum mrst_cpu_type { - MRST_CPU_CHIP_LINCROFT = 1, - MRST_CPU_CHIP_PENWELL, + /* 1 was Moorestown */ + MRST_CPU_CHIP_PENWELL = 2, }; extern enum mrst_cpu_type __mrst_cpu_chip; diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 8c3cdded6f2b..359b6899a36c 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -180,6 +180,7 @@ static struct apic apic_flat = { .name = "flat", .probe = flat_probe, .acpi_madt_oem_check = flat_acpi_madt_oem_check, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = flat_apic_id_registered, .irq_delivery_mode = dest_LowestPrio, @@ -337,6 +338,7 @@ static struct apic apic_physflat = { .name = "physical flat", .probe = physflat_probe, .acpi_madt_oem_check = physflat_acpi_madt_oem_check, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = flat_apic_id_registered, .irq_delivery_mode = dest_Fixed, diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index 775b82bc655c..634ae6cdd5c9 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -124,6 +124,7 @@ struct apic apic_noop = { .probe = noop_probe, .acpi_madt_oem_check = NULL, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = noop_apic_id_registered, .irq_delivery_mode = dest_LowestPrio, diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c index 09d3d8c1cd99..d9ea5f331ac5 100644 --- a/arch/x86/kernel/apic/apic_numachip.c +++ b/arch/x86/kernel/apic/apic_numachip.c @@ -56,6 +56,12 @@ static unsigned int read_xapic_id(void) return get_apic_id(apic_read(APIC_ID)); } +static int numachip_apic_id_valid(int apicid) +{ + /* Trust what bootloader passes in MADT */ + return 1; +} + static int numachip_apic_id_registered(void) { return physid_isset(read_xapic_id(), phys_cpu_present_map); @@ -223,10 +229,11 @@ static int __init numachip_system_init(void) } early_initcall(numachip_system_init); -static int numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int __cpuinit numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (!strncmp(oem_id, "NUMASC", 6)) { numachip_system = 1; + setup_force_cpu_cap(X86_FEATURE_X2APIC); return 1; } @@ -238,6 +245,7 @@ static struct apic apic_numachip __refconst = { .name = "NumaConnect system", .probe = numachip_probe, .acpi_madt_oem_check = numachip_acpi_madt_oem_check, + .apic_id_valid = numachip_apic_id_valid, .apic_id_registered = numachip_apic_id_registered, .irq_delivery_mode = dest_Fixed, diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index 521bead01137..0cdec7065aff 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -198,6 +198,7 @@ static struct apic apic_bigsmp = { .name = "bigsmp", .probe = probe_bigsmp, .acpi_madt_oem_check = NULL, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = bigsmp_apic_id_registered, .irq_delivery_mode = dest_Fixed, diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 5d513bc47b6b..e42d1d3b9134 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -625,6 +625,7 @@ static struct apic __refdata apic_es7000_cluster = { .name = "es7000", .probe = probe_es7000, .acpi_madt_oem_check = es7000_acpi_madt_oem_check_cluster, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = es7000_apic_id_registered, .irq_delivery_mode = dest_LowestPrio, @@ -690,6 +691,7 @@ static struct apic __refdata apic_es7000 = { .name = "es7000", .probe = probe_es7000, .acpi_madt_oem_check = es7000_acpi_madt_oem_check, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = es7000_apic_id_registered, .irq_delivery_mode = dest_Fixed, diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index c4a61ca1349a..00d2422ca7c9 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -478,6 +478,7 @@ static struct apic __refdata apic_numaq = { .name = "NUMAQ", .probe = probe_numaq, .acpi_madt_oem_check = NULL, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = numaq_apic_id_registered, .irq_delivery_mode = dest_LowestPrio, diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 0787bb3412f4..ff2c1b9aac4d 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -92,6 +92,7 @@ static struct apic apic_default = { .name = "default", .probe = probe_default, .acpi_madt_oem_check = NULL, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = default_apic_id_registered, .irq_delivery_mode = dest_LowestPrio, diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 19114423c58c..fea000b27f07 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -496,6 +496,7 @@ static struct apic apic_summit = { .name = "summit", .probe = probe_summit, .acpi_madt_oem_check = summit_acpi_madt_oem_check, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = summit_apic_id_registered, .irq_delivery_mode = dest_LowestPrio, diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index 500795875827..9193713060a9 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -213,6 +213,7 @@ static struct apic apic_x2apic_cluster = { .name = "cluster x2apic", .probe = x2apic_cluster_probe, .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = x2apic_apic_id_registered, .irq_delivery_mode = dest_LowestPrio, diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index f5373dfde21e..bcd1db6eaca9 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -119,6 +119,7 @@ static struct apic apic_x2apic_phys = { .name = "physical x2apic", .probe = x2apic_phys_probe, .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = x2apic_apic_id_registered, .irq_delivery_mode = dest_Fixed, diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 79b05b88aa19..fc4771425852 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -351,6 +351,7 @@ static struct apic __refdata apic_x2apic_uv_x = { .name = "UV large system", .probe = uv_probe, .acpi_madt_oem_check = uv_acpi_madt_oem_check, + .apic_id_valid = default_apic_id_valid, .apic_id_registered = uv_apic_id_registered, .irq_delivery_mode = dest_Fixed, diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index dccebbe758ca..e578a79a3093 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -833,7 +833,7 @@ int __cpuinit native_cpu_up(unsigned int cpu) if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid || !physid_isset(apicid, phys_cpu_present_map) || - (!x2apic_mode && apicid >= 255)) { + !apic->apic_id_valid(apicid)) { printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu); return -EINVAL; } diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile index 07c9cd05021a..246b788847ff 100644 --- a/arch/x86/platform/geode/Makefile +++ b/arch/x86/platform/geode/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_ALIX) += alix.o +obj-$(CONFIG_NET5501) += net5501.o diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c index dc5f1d32aced..90e23e7679a5 100644 --- a/arch/x86/platform/geode/alix.c +++ b/arch/x86/platform/geode/alix.c @@ -6,6 +6,7 @@ * * Copyright (C) 2008 Constantin Baranov <const@mimas.ru> * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com> + * and Philip Prindeville <philipp@redfish-solutions.com> * * TODO: There are large similarities with leds-net5501.c * by Alessandro Zummo <a.zummo@towertech.it> @@ -24,14 +25,47 @@ #include <linux/leds.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/dmi.h> #include <asm/geode.h> +#define BIOS_SIGNATURE_TINYBIOS 0xf0000 +#define BIOS_SIGNATURE_COREBOOT 0x500 +#define BIOS_REGION_SIZE 0x10000 + static bool force = 0; module_param(force, bool, 0444); /* FIXME: Award bios is not automatically detected as Alix platform */ MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform"); +static struct gpio_keys_button alix_gpio_buttons[] = { + { + .code = KEY_RESTART, + .gpio = 24, + .active_low = 1, + .desc = "Reset button", + .type = EV_KEY, + .wakeup = 0, + .debounce_interval = 100, + .can_disable = 0, + } +}; +static struct gpio_keys_platform_data alix_buttons_data = { + .buttons = alix_gpio_buttons, + .nbuttons = ARRAY_SIZE(alix_gpio_buttons), + .poll_interval = 20, +}; + +static struct platform_device alix_buttons_dev = { + .name = "gpio-keys-polled", + .id = 1, + .dev = { + .platform_data = &alix_buttons_data, + } +}; + static struct gpio_led alix_leds[] = { { .name = "alix:1", @@ -64,17 +98,22 @@ static struct platform_device alix_leds_dev = { .dev.platform_data = &alix_leds_data, }; +static struct __initdata platform_device *alix_devs[] = { + &alix_buttons_dev, + &alix_leds_dev, +}; + static void __init register_alix(void) { /* Setup LED control through leds-gpio driver */ - platform_device_register(&alix_leds_dev); + platform_add_devices(alix_devs, ARRAY_SIZE(alix_devs)); } -static int __init alix_present(unsigned long bios_phys, +static bool __init alix_present(unsigned long bios_phys, const char *alix_sig, size_t alix_sig_len) { - const size_t bios_len = 0x00010000; + const size_t bios_len = BIOS_REGION_SIZE; const char *bios_virt; const char *scan_end; const char *p; @@ -84,7 +123,7 @@ static int __init alix_present(unsigned long bios_phys, printk(KERN_NOTICE "%s: forced to skip BIOS test, " "assume system is ALIX.2/ALIX.3\n", KBUILD_MODNAME); - return 1; + return true; } bios_virt = phys_to_virt(bios_phys); @@ -109,15 +148,33 @@ static int __init alix_present(unsigned long bios_phys, *a = '\0'; tail = p + alix_sig_len; - if ((tail[0] == '2' || tail[0] == '3')) { + if ((tail[0] == '2' || tail[0] == '3' || tail[0] == '6')) { printk(KERN_INFO "%s: system is recognized as \"%s\"\n", KBUILD_MODNAME, name); - return 1; + return true; } } - return 0; + return false; +} + +static bool __init alix_present_dmi(void) +{ + const char *vendor, *product; + + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!vendor || strcmp(vendor, "PC Engines")) + return false; + + product = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!product || (strcmp(product, "ALIX.2D") && strcmp(product, "ALIX.6"))) + return false; + + printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n", + KBUILD_MODNAME, vendor, product); + + return true; } static int __init alix_init(void) @@ -128,8 +185,9 @@ static int __init alix_init(void) if (!is_geode()) return 0; - if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) || - alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1)) + if (alix_present(BIOS_SIGNATURE_TINYBIOS, tinybios_sig, sizeof(tinybios_sig) - 1) || + alix_present(BIOS_SIGNATURE_COREBOOT, coreboot_sig, sizeof(coreboot_sig) - 1) || + alix_present_dmi()) register_alix(); return 0; diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c new file mode 100644 index 000000000000..66d377e334f7 --- /dev/null +++ b/arch/x86/platform/geode/net5501.c @@ -0,0 +1,154 @@ +/* + * System Specific setup for Soekris net5501 + * At the moment this means setup of GPIO control of LEDs and buttons + * on net5501 boards. + * + * + * Copyright (C) 2008-2009 Tower Technologies + * Written by Alessandro Zummo <a.zummo@towertech.it> + * + * Copyright (C) 2008 Constantin Baranov <const@mimas.ru> + * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com> + * and Philip Prindeville <philipp@redfish-solutions.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/string.h> +#include <linux/module.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <asm/geode.h> + +#define BIOS_REGION_BASE 0xffff0000 +#define BIOS_REGION_SIZE 0x00010000 + +static struct gpio_keys_button net5501_gpio_buttons[] = { + { + .code = KEY_RESTART, + .gpio = 24, + .active_low = 1, + .desc = "Reset button", + .type = EV_KEY, + .wakeup = 0, + .debounce_interval = 100, + .can_disable = 0, + } +}; +static struct gpio_keys_platform_data net5501_buttons_data = { + .buttons = net5501_gpio_buttons, + .nbuttons = ARRAY_SIZE(net5501_gpio_buttons), + .poll_interval = 20, +}; + +static struct platform_device net5501_buttons_dev = { + .name = "gpio-keys-polled", + .id = 1, + .dev = { + .platform_data = &net5501_buttons_data, + } +}; + +static struct gpio_led net5501_leds[] = { + { + .name = "net5501:1", + .gpio = 6, + .default_trigger = "default-on", + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data net5501_leds_data = { + .num_leds = ARRAY_SIZE(net5501_leds), + .leds = net5501_leds, +}; + +static struct platform_device net5501_leds_dev = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &net5501_leds_data, +}; + +static struct __initdata platform_device *net5501_devs[] = { + &net5501_buttons_dev, + &net5501_leds_dev, +}; + +static void __init register_net5501(void) +{ + /* Setup LED control through leds-gpio driver */ + platform_add_devices(net5501_devs, ARRAY_SIZE(net5501_devs)); +} + +struct net5501_board { + u16 offset; + u16 len; + char *sig; +}; + +static struct net5501_board __initdata boards[] = { + { 0xb7b, 7, "net5501" }, /* net5501 v1.33/1.33c */ + { 0xb1f, 7, "net5501" }, /* net5501 v1.32i */ +}; + +static bool __init net5501_present(void) +{ + int i; + unsigned char *rombase, *bios; + bool found = false; + + rombase = ioremap(BIOS_REGION_BASE, BIOS_REGION_SIZE - 1); + if (!rombase) { + printk(KERN_ERR "%s: failed to get rombase\n", KBUILD_MODNAME); + return found; + } + + bios = rombase + 0x20; /* null terminated */ + + if (memcmp(bios, "comBIOS", 7)) + goto unmap; + + for (i = 0; i < ARRAY_SIZE(boards); i++) { + unsigned char *model = rombase + boards[i].offset; + + if (!memcmp(model, boards[i].sig, boards[i].len)) { + printk(KERN_INFO "%s: system is recognized as \"%s\"\n", + KBUILD_MODNAME, model); + + found = true; + break; + } + } + +unmap: + iounmap(rombase); + return found; +} + +static int __init net5501_init(void) +{ + if (!is_geode()) + return 0; + + if (!net5501_present()) + return 0; + + register_net5501(); + + return 0; +} + +module_init(net5501_init); + +MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>"); +MODULE_DESCRIPTION("Soekris net5501 System Setup"); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile index 7baed5135e0f..af1da7e623f9 100644 --- a/arch/x86/platform/mrst/Makefile +++ b/arch/x86/platform/mrst/Makefile @@ -1,4 +1,3 @@ obj-$(CONFIG_X86_INTEL_MID) += mrst.o obj-$(CONFIG_X86_INTEL_MID) += vrtc.o obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_mrst.o -obj-$(CONFIG_X86_MRST) += pmu.o diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 475e2cd0f3c3..721e65285dce 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -78,16 +78,11 @@ int sfi_mrtc_num; static void mrst_power_off(void) { - if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) - intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1); } static void mrst_reboot(void) { - if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) - intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0); - else - intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); + intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); } /* parse all the mtimer info to a static mtimer array */ @@ -200,34 +195,28 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) static unsigned long __init mrst_calibrate_tsc(void) { - unsigned long flags, fast_calibrate; - if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) { - u32 lo, hi, ratio, fsb; - - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi); - ratio = (hi >> 8) & 0x1f; - pr_debug("ratio is %d\n", ratio); - if (!ratio) { - pr_err("read a zero ratio, should be incorrect!\n"); - pr_err("force tsc ratio to 16 ...\n"); - ratio = 16; - } - rdmsr(MSR_FSB_FREQ, lo, hi); - if ((lo & 0x7) == 0x7) - fsb = PENWELL_FSB_FREQ_83SKU; - else - fsb = PENWELL_FSB_FREQ_100SKU; - fast_calibrate = ratio * fsb; - pr_debug("read penwell tsc %lu khz\n", fast_calibrate); - lapic_timer_frequency = fsb * 1000 / HZ; - /* mark tsc clocksource as reliable */ - set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE); - } else { - local_irq_save(flags); - fast_calibrate = apbt_quick_calibrate(); - local_irq_restore(flags); + unsigned long fast_calibrate; + u32 lo, hi, ratio, fsb; + + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi); + ratio = (hi >> 8) & 0x1f; + pr_debug("ratio is %d\n", ratio); + if (!ratio) { + pr_err("read a zero ratio, should be incorrect!\n"); + pr_err("force tsc ratio to 16 ...\n"); + ratio = 16; } + rdmsr(MSR_FSB_FREQ, lo, hi); + if ((lo & 0x7) == 0x7) + fsb = PENWELL_FSB_FREQ_83SKU; + else + fsb = PENWELL_FSB_FREQ_100SKU; + fast_calibrate = ratio * fsb; + pr_debug("read penwell tsc %lu khz\n", fast_calibrate); + lapic_timer_frequency = fsb * 1000 / HZ; + /* mark tsc clocksource as reliable */ + set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE); if (fast_calibrate) return fast_calibrate; @@ -261,16 +250,11 @@ static void __cpuinit mrst_arch_setup(void) { if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL; - else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26) - __mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT; else { - pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n", + pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n", boot_cpu_data.x86, boot_cpu_data.x86_model); - __mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT; + __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL; } - pr_debug("Moorestown CPU %s identified\n", - (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ? - "Lincroft" : "Penwell"); } /* MID systems don't have i8042 controller */ @@ -686,6 +670,11 @@ static void *msic_ocd_platform_data(void *info) return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD); } +static void *msic_thermal_platform_data(void *info) +{ + return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL); +} + static const struct devs_id __initconst device_ids[] = { {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data}, {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, @@ -705,6 +694,7 @@ static const struct devs_id __initconst device_ids[] = { {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data}, {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data}, {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data}, + {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data}, {}, }; diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c deleted file mode 100644 index c0ac06da57ac..000000000000 --- a/arch/x86/platform/mrst/pmu.c +++ /dev/null @@ -1,817 +0,0 @@ -/* - * mrst/pmu.c - driver for MRST Power Management Unit - * - * Copyright (c) 2011, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/cpuidle.h> -#include <linux/debugfs.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/seq_file.h> -#include <linux/sfi.h> -#include <asm/intel_scu_ipc.h> -#include "pmu.h" - -#define IPCMSG_FW_REVISION 0xF4 - -struct mrst_device { - u16 pci_dev_num; /* DEBUG only */ - u16 lss; - u16 latest_request; - unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */ -}; - -/* - * comlete list of MRST PCI devices - */ -static struct mrst_device mrst_devs[] = { -/* 0 */ { 0x0800, LSS_SPI0 }, /* Moorestown SPI Ctrl 0 */ -/* 1 */ { 0x0801, LSS_SPI1 }, /* Moorestown SPI Ctrl 1 */ -/* 2 */ { 0x0802, LSS_I2C0 }, /* Moorestown I2C 0 */ -/* 3 */ { 0x0803, LSS_I2C1 }, /* Moorestown I2C 1 */ -/* 4 */ { 0x0804, LSS_I2C2 }, /* Moorestown I2C 2 */ -/* 5 */ { 0x0805, LSS_KBD }, /* Moorestown Keyboard Ctrl */ -/* 6 */ { 0x0806, LSS_USB_HC }, /* Moorestown USB Ctrl */ -/* 7 */ { 0x0807, LSS_SD_HC0 }, /* Moorestown SD Host Ctrl 0 */ -/* 8 */ { 0x0808, LSS_SD_HC1 }, /* Moorestown SD Host Ctrl 1 */ -/* 9 */ { 0x0809, LSS_NAND }, /* Moorestown NAND Ctrl */ -/* 10 */ { 0x080a, LSS_AUDIO }, /* Moorestown Audio Ctrl */ -/* 11 */ { 0x080b, LSS_IMAGING }, /* Moorestown ISP */ -/* 12 */ { 0x080c, LSS_SECURITY }, /* Moorestown Security Controller */ -/* 13 */ { 0x080d, LSS_DISPLAY }, /* Moorestown External Displays */ -/* 14 */ { 0x080e, 0 }, /* Moorestown SCU IPC */ -/* 15 */ { 0x080f, LSS_GPIO }, /* Moorestown GPIO Controller */ -/* 16 */ { 0x0810, 0 }, /* Moorestown Power Management Unit */ -/* 17 */ { 0x0811, LSS_USB_OTG }, /* Moorestown OTG Ctrl */ -/* 18 */ { 0x0812, LSS_SPI2 }, /* Moorestown SPI Ctrl 2 */ -/* 19 */ { 0x0813, 0 }, /* Moorestown SC DMA */ -/* 20 */ { 0x0814, LSS_AUDIO_LPE }, /* Moorestown LPE DMA */ -/* 21 */ { 0x0815, LSS_AUDIO_SSP }, /* Moorestown SSP0 */ - -/* 22 */ { 0x084F, LSS_SD_HC2 }, /* Moorestown SD Host Ctrl 2 */ - -/* 23 */ { 0x4102, 0 }, /* Lincroft */ -/* 24 */ { 0x4110, 0 }, /* Lincroft */ -}; - -/* n.b. We ignore PCI-id 0x815 in LSS9 b/c Linux has no driver for it */ -static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0}; -static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803, - 0x0804, 0x0805, 0x080f, 0}; - -/* handle concurrent SMP invokations of pmu_pci_set_power_state() */ -static spinlock_t mrst_pmu_power_state_lock; - -static unsigned int wake_counters[MRST_NUM_LSS]; /* DEBUG only */ -static unsigned int pmu_irq_stats[INT_INVALID + 1]; /* DEBUG only */ - -static int graphics_is_off; -static int lss_s0i3_enabled; -static bool mrst_pmu_s0i3_enable; - -/* debug counters */ -static u32 pmu_wait_ready_calls; -static u32 pmu_wait_ready_udelays; -static u32 pmu_wait_ready_udelays_max; -static u32 pmu_wait_done_calls; -static u32 pmu_wait_done_udelays; -static u32 pmu_wait_done_udelays_max; -static u32 pmu_set_power_state_entry; -static u32 pmu_set_power_state_send_cmd; - -static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num) -{ - int index = 0; - - if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815)) - index = pci_dev_num - 0x800; - else if (pci_dev_num == 0x084F) - index = 22; - else if (pci_dev_num == 0x4102) - index = 23; - else if (pci_dev_num == 0x4110) - index = 24; - - if (pci_dev_num != mrst_devs[index].pci_dev_num) { - WARN_ONCE(1, FW_BUG "Unknown PCI device 0x%04X\n", pci_dev_num); - return 0; - } - - return &mrst_devs[index]; -} - -/** - * mrst_pmu_validate_cstates - * @dev: cpuidle_device - * - * Certain states are not appropriate for governor to pick in some cases. - * This function will be called as cpuidle_device's prepare callback and - * thus tells governor to ignore such states when selecting the next state - * to enter. - */ - -#define IDLE_STATE4_IS_C6 4 -#define IDLE_STATE5_IS_S0I3 5 - -int mrst_pmu_invalid_cstates(void) -{ - int cpu = smp_processor_id(); - - /* - * Demote to C4 if the PMU is busy. - * Since LSS changes leave the busy bit clear... - * busy means either the PMU is waiting for an ACK-C6 that - * isn't coming due to an MWAIT that returned immediately; - * or we returned from S0i3 successfully, and the PMU - * is not done sending us interrupts. - */ - if (pmu_read_busy_status()) - return 1 << IDLE_STATE4_IS_C6 | 1 << IDLE_STATE5_IS_S0I3; - - /* - * Disallow S0i3 if: PMU is not initialized, or CPU1 is active, - * or if device LSS is insufficient, or the GPU is active, - * or if it has been explicitly disabled. - */ - if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) || - !lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable) - return 1 << IDLE_STATE5_IS_S0I3; - else - return 0; -} - -/* - * pmu_update_wake_counters(): read PM_WKS, update wake_counters[] - * DEBUG only. - */ -static void pmu_update_wake_counters(void) -{ - int lss; - u32 wake_status; - - wake_status = pmu_read_wks(); - - for (lss = 0; lss < MRST_NUM_LSS; ++lss) { - if (wake_status & (1 << lss)) - wake_counters[lss]++; - } -} - -int mrst_pmu_s0i3_entry(void) -{ - int status; - - /* Clear any possible error conditions */ - pmu_write_ics(0x300); - - /* set wake control to current D-states */ - pmu_write_wssc(S0I3_SSS_TARGET); - - status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd); - pmu_update_wake_counters(); - return status; -} - -/* poll for maximum of 5ms for busy bit to clear */ -static int pmu_wait_ready(void) -{ - int udelays; - - pmu_wait_ready_calls++; - - for (udelays = 0; udelays < 500; ++udelays) { - if (udelays > pmu_wait_ready_udelays_max) - pmu_wait_ready_udelays_max = udelays; - - if (pmu_read_busy_status() == 0) - return 0; - - udelay(10); - pmu_wait_ready_udelays++; - } - - /* - * if this fires, observe - * /sys/kernel/debug/mrst_pmu_wait_ready_calls - * /sys/kernel/debug/mrst_pmu_wait_ready_udelays - */ - WARN_ONCE(1, "SCU not ready for 5ms"); - return -EBUSY; -} -/* poll for maximum of 50ms us for busy bit to clear */ -static int pmu_wait_done(void) -{ - int udelays; - - pmu_wait_done_calls++; - - for (udelays = 0; udelays < 500; ++udelays) { - if (udelays > pmu_wait_done_udelays_max) - pmu_wait_done_udelays_max = udelays; - - if (pmu_read_busy_status() == 0) - return 0; - - udelay(100); - pmu_wait_done_udelays++; - } - - /* - * if this fires, observe - * /sys/kernel/debug/mrst_pmu_wait_done_calls - * /sys/kernel/debug/mrst_pmu_wait_done_udelays - */ - WARN_ONCE(1, "SCU not done for 50ms"); - return -EBUSY; -} - -u32 mrst_pmu_msi_is_disabled(void) -{ - return pmu_msi_is_disabled(); -} - -void mrst_pmu_enable_msi(void) -{ - pmu_msi_enable(); -} - -/** - * pmu_irq - pmu driver interrupt handler - * Context: interrupt context - */ -static irqreturn_t pmu_irq(int irq, void *dummy) -{ - union pmu_pm_ics pmu_ics; - - pmu_ics.value = pmu_read_ics(); - - if (!pmu_ics.bits.pending) - return IRQ_NONE; - - switch (pmu_ics.bits.cause) { - case INT_SPURIOUS: - case INT_CMD_DONE: - case INT_CMD_ERR: - case INT_WAKE_RX: - case INT_SS_ERROR: - case INT_S0IX_MISS: - case INT_NO_ACKC6: - pmu_irq_stats[pmu_ics.bits.cause]++; - break; - default: - pmu_irq_stats[INT_INVALID]++; - } - - pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */ - - return IRQ_HANDLED; -} - -/* - * Translate PCI power management to MRST LSS D-states - */ -static int pci_2_mrst_state(int lss, pci_power_t pci_state) -{ - switch (pci_state) { - case PCI_D0: - if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET) - return D0i1; - else - return D0; - case PCI_D1: - return D0i1; - case PCI_D2: - return D0i2; - case PCI_D3hot: - case PCI_D3cold: - return D0i3; - default: - WARN(1, "pci_state %d\n", pci_state); - return 0; - } -} - -static int pmu_issue_command(u32 pm_ssc) -{ - union pmu_pm_set_cfg_cmd_t command; - - if (pmu_read_busy_status()) { - pr_debug("pmu is busy, Operation not permitted\n"); - return -1; - } - - /* - * enable interrupts in PMU so that interrupts are - * propagated when ioc bit for a particular set - * command is set - */ - - pmu_irq_enable(); - - /* Configure the sub systems for pmu2 */ - - pmu_write_ssc(pm_ssc); - - /* - * Send the set config command for pmu its configured - * for mode CM_IMMEDIATE & hence with No Trigger - */ - - command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE; - command.pmu2_params.d_param.cfg_delay = 0; - command.pmu2_params.d_param.rsvd = 0; - - /* construct the command to send SET_CFG to particular PMU */ - command.pmu2_params.d_param.cmd = SET_CFG_CMD; - command.pmu2_params.d_param.ioc = 0; - command.pmu2_params.d_param.mode_id = 0; - command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0; - - /* write the value of PM_CMD into particular PMU */ - pr_debug("pmu command being written %x\n", - command.pmu_pm_set_cfg_cmd_value); - - pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value); - - return 0; -} - -static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state) -{ - u16 existing_request; - int i; - - for (i = 0; ids[i]; ++i) { - struct mrst_device *mrst_dev; - - mrst_dev = pci_id_2_mrst_dev(ids[i]); - if (unlikely(!mrst_dev)) - continue; - - existing_request = mrst_dev->latest_request; - if (existing_request < pci_state) - pci_state = existing_request; - } - return pci_state; -} - -/** - * pmu_pci_set_power_state - Callback function is used by all the PCI devices - * for a platform specific device power on/shutdown. - */ - -int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state) -{ - u32 old_sss, new_sss; - int status = 0; - struct mrst_device *mrst_dev; - - pmu_set_power_state_entry++; - - BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL); - BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold); - - mrst_dev = pci_id_2_mrst_dev(pdev->device); - if (unlikely(!mrst_dev)) - return -ENODEV; - - mrst_dev->pci_state_counts[pci_state]++; /* count invocations */ - - /* PMU driver calls self as part of PCI initialization, ignore */ - if (pdev->device == PCI_DEV_ID_MRST_PMU) - return 0; - - BUG_ON(!pmu_reg); /* SW bug if called before initialized */ - - spin_lock(&mrst_pmu_power_state_lock); - - if (pdev->d3_delay) { - dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n", - pdev->d3_delay); - pdev->d3_delay = 0; - } - /* - * If Lincroft graphics, simply remember state - */ - if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY - && !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) { - if (pci_state == PCI_D0) - graphics_is_off = 0; - else - graphics_is_off = 1; - goto ret; - } - - if (!mrst_dev->lss) - goto ret; /* device with no LSS */ - - if (mrst_dev->latest_request == pci_state) - goto ret; /* no change */ - - mrst_dev->latest_request = pci_state; /* record latest request */ - - /* - * LSS9 and LSS10 contain multiple PCI devices. - * Use the lowest numbered (highest power) state in the LSS - */ - if (mrst_dev->lss == 9) - pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state); - else if (mrst_dev->lss == 10) - pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state); - - status = pmu_wait_ready(); - if (status) - goto ret; - - old_sss = pmu_read_sss(); - new_sss = old_sss & ~SSMSK(3, mrst_dev->lss); - new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state), - mrst_dev->lss); - - if (new_sss == old_sss) - goto ret; /* nothing to do */ - - pmu_set_power_state_send_cmd++; - - status = pmu_issue_command(new_sss); - - if (unlikely(status != 0)) { - dev_err(&pdev->dev, "Failed to Issue a PM command\n"); - goto ret; - } - - if (pmu_wait_done()) - goto ret; - - lss_s0i3_enabled = - ((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET); -ret: - spin_unlock(&mrst_pmu_power_state_lock); - return status; -} - -#ifdef CONFIG_DEBUG_FS -static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"}; - -static inline const char *d0ix_name(int state) -{ - return d0ix_names[(int) state]; -} - -static int debug_mrst_pmu_show(struct seq_file *s, void *unused) -{ - struct pci_dev *pdev = NULL; - u32 cur_pmsss; - int lss; - - seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET); - - cur_pmsss = pmu_read_sss(); - - seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET); - - seq_printf(s, "0x%08X Current SSS ", cur_pmsss); - seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n"); - - if (cpumask_equal(cpu_online_mask, cpumask_of(0))) - seq_printf(s, "cpu0 is only cpu online\n"); - else - seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n"); - - seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]"); - - - for_each_pci_dev(pdev) { - int pos; - u16 pmcsr; - struct mrst_device *mrst_dev; - int i; - - mrst_dev = pci_id_2_mrst_dev(pdev->device); - - seq_printf(s, "%s %04x/%04X %-16.16s ", - dev_name(&pdev->dev), - pdev->vendor, pdev->device, - dev_driver_string(&pdev->dev)); - - if (unlikely (!mrst_dev)) { - seq_printf(s, " UNKNOWN\n"); - continue; - } - - if (mrst_dev->lss) - seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss, - d0ix_name(((cur_pmsss >> - (mrst_dev->lss * 2)) & 0x3))); - else - seq_printf(s, " "); - - /* PCI PM config space setting */ - pos = pci_find_capability(pdev, PCI_CAP_ID_PM); - if (pos != 0) { - pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); - seq_printf(s, "PCI-%-4s", - pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK)); - } else { - seq_printf(s, " "); - } - - seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request)); - for (i = 0; i <= PCI_D3cold; ++i) - seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]); - - if (mrst_dev->lss) { - unsigned int lssmask; - - lssmask = SSMSK(D0i3, mrst_dev->lss); - - if ((lssmask & S0I3_SSS_TARGET) && - ((lssmask & cur_pmsss) != - (lssmask & S0I3_SSS_TARGET))) - seq_printf(s , "[BLOCKS s0i3]"); - } - - seq_printf(s, "\n"); - } - seq_printf(s, "Wake Counters:\n"); - for (lss = 0; lss < MRST_NUM_LSS; ++lss) - seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]); - - seq_printf(s, "Interrupt Counters:\n"); - seq_printf(s, - "INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n" - "INT_CMD_ERR \t%8u\n" "INT_WAKE_RX \t%8u\n" - "INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n" - "INT_NO_ACKC6 \t%8u\n" "INT_INVALID \t%8u\n", - pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE], - pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX], - pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS], - pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]); - - seq_printf(s, "mrst_pmu_wait_ready_calls %8d\n", - pmu_wait_ready_calls); - seq_printf(s, "mrst_pmu_wait_ready_udelays %8d\n", - pmu_wait_ready_udelays); - seq_printf(s, "mrst_pmu_wait_ready_udelays_max %8d\n", - pmu_wait_ready_udelays_max); - seq_printf(s, "mrst_pmu_wait_done_calls %8d\n", - pmu_wait_done_calls); - seq_printf(s, "mrst_pmu_wait_done_udelays %8d\n", - pmu_wait_done_udelays); - seq_printf(s, "mrst_pmu_wait_done_udelays_max %8d\n", - pmu_wait_done_udelays_max); - seq_printf(s, "mrst_pmu_set_power_state_entry %8d\n", - pmu_set_power_state_entry); - seq_printf(s, "mrst_pmu_set_power_state_send_cmd %8d\n", - pmu_set_power_state_send_cmd); - seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status()); - - return 0; -} - -static int debug_mrst_pmu_open(struct inode *inode, struct file *file) -{ - return single_open(file, debug_mrst_pmu_show, NULL); -} - -static const struct file_operations devices_state_operations = { - .open = debug_mrst_pmu_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif /* DEBUG_FS */ - -/* - * Validate SCU PCI shim PCI vendor capability byte - * against LSS hard-coded in mrst_devs[] above. - * DEBUG only. - */ -static void pmu_scu_firmware_debug(void) -{ - struct pci_dev *pdev = NULL; - - for_each_pci_dev(pdev) { - struct mrst_device *mrst_dev; - u8 pci_config_lss; - int pos; - - mrst_dev = pci_id_2_mrst_dev(pdev->device); - if (unlikely(!mrst_dev)) { - printk(KERN_ERR FW_BUG "pmu: Unknown " - "PCI device 0x%04X\n", pdev->device); - continue; - } - - if (mrst_dev->lss == 0) - continue; /* no LSS in our table */ - - pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR); - if (!pos != 0) { - printk(KERN_ERR FW_BUG "pmu: 0x%04X " - "missing PCI Vendor Capability\n", - pdev->device); - continue; - } - pci_read_config_byte(pdev, pos + 4, &pci_config_lss); - if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) { - printk(KERN_ERR FW_BUG "pmu: 0x%04X " - "invalid PCI Vendor Capability 0x%x " - " expected LSS 0x%X\n", - pdev->device, pci_config_lss, mrst_dev->lss); - continue; - } - pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK; - - if (mrst_dev->lss == pci_config_lss) - continue; - - printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n", - pdev->device, pci_config_lss, mrst_dev->lss); - } -} - -/** - * pmu_probe - */ -static int __devinit pmu_probe(struct pci_dev *pdev, - const struct pci_device_id *pci_id) -{ - int ret; - struct mrst_pmu_reg *pmu; - - /* Init the device */ - ret = pci_enable_device(pdev); - if (ret) { - dev_err(&pdev->dev, "Unable to Enable PCI device\n"); - return ret; - } - - ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME); - if (ret < 0) { - dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n"); - goto out_err1; - } - - /* Map the memory of PMU reg base */ - pmu = pci_iomap(pdev, 0, 0); - if (!pmu) { - dev_err(&pdev->dev, "Unable to map the PMU address space\n"); - ret = -ENOMEM; - goto out_err2; - } - -#ifdef CONFIG_DEBUG_FS - /* /sys/kernel/debug/mrst_pmu */ - (void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO, - NULL, NULL, &devices_state_operations); -#endif - pmu_reg = pmu; /* success */ - - if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) { - dev_err(&pdev->dev, "Registering isr has failed\n"); - ret = -1; - goto out_err3; - } - - pmu_scu_firmware_debug(); - - pmu_write_wkc(S0I3_WAKE_SOURCES); /* Enable S0i3 wakeup sources */ - - pmu_wait_ready(); - - pmu_write_ssc(D0I1_ACG_SSS_TARGET); /* Enable Auto-Clock_Gating */ - pmu_write_cmd(0x201); - - spin_lock_init(&mrst_pmu_power_state_lock); - - /* Enable the hardware interrupt */ - pmu_irq_enable(); - return 0; - -out_err3: - free_irq(pdev->irq, NULL); - pci_iounmap(pdev, pmu_reg); - pmu_reg = NULL; -out_err2: - pci_release_region(pdev, 0); -out_err1: - pci_disable_device(pdev); - return ret; -} - -static void __devexit pmu_remove(struct pci_dev *pdev) -{ - dev_err(&pdev->dev, "Mid PM pmu_remove called\n"); - - /* Freeing up the irq */ - free_irq(pdev->irq, NULL); - - pci_iounmap(pdev, pmu_reg); - pmu_reg = NULL; - - /* disable the current PCI device */ - pci_release_region(pdev, 0); - pci_disable_device(pdev); -} - -static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = { - { PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 }, - { } -}; - -MODULE_DEVICE_TABLE(pci, pmu_pci_ids); - -static struct pci_driver driver = { - .name = MRST_PMU_DRV_NAME, - .id_table = pmu_pci_ids, - .probe = pmu_probe, - .remove = __devexit_p(pmu_remove), -}; - -/** - * pmu_pci_register - register the PMU driver as PCI device - */ -static int __init pmu_pci_register(void) -{ - return pci_register_driver(&driver); -} - -/* Register and probe via fs_initcall() to preceed device_initcall() */ -fs_initcall(pmu_pci_register); - -static void __exit mid_pci_cleanup(void) -{ - pci_unregister_driver(&driver); -} - -static int ia_major; -static int ia_minor; - -static int pmu_sfi_parse_oem(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - - sb = (struct sfi_table_simple *)table; - ia_major = (sb->pentry[1] >> 0) & 0xFFFF; - ia_minor = (sb->pentry[1] >> 16) & 0xFFFF; - printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n", - ia_major, ia_minor); - - return 0; -} - -static int __init scu_fw_check(void) -{ - int ret; - u32 fw_version; - - if (!pmu_reg) - return 0; /* this driver didn't probe-out */ - - sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem); - - if (ia_major < 0x6005 || ia_minor < 0x1525) { - WARN(1, "mrst_pmu: IA FW version too old\n"); - return -1; - } - - ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0, - &fw_version, 1); - - if (ret) { - WARN(1, "mrst_pmu: IPC FW version? %d\n", ret); - } else { - int scu_major = (fw_version >> 8) & 0xFF; - int scu_minor = (fw_version >> 0) & 0xFF; - - printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version); - - if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) { - printk(KERN_INFO "mrst_pmu: enabling S0i3\n"); - mrst_pmu_s0i3_enable = true; - } else { - WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X", - scu_major, scu_minor); - } - } - return 0; -} -late_initcall(scu_fw_check); -module_exit(mid_pci_cleanup); diff --git a/arch/x86/platform/mrst/pmu.h b/arch/x86/platform/mrst/pmu.h deleted file mode 100644 index bfbfe64b167b..000000000000 --- a/arch/x86/platform/mrst/pmu.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * mrst/pmu.h - private definitions for MRST Power Management Unit mrst/pmu.c - * - * Copyright (c) 2011, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef _MRST_PMU_H_ -#define _MRST_PMU_H_ - -#define PCI_DEV_ID_MRST_PMU 0x0810 -#define MRST_PMU_DRV_NAME "mrst_pmu" -#define PCI_SUB_CLASS_MASK 0xFF00 - -#define PCI_VENDOR_CAP_LOG_ID_MASK 0x7F -#define PCI_VENDOR_CAP_LOG_SS_MASK 0x80 - -#define SUB_SYS_ALL_D0I1 0x01155555 -#define S0I3_WAKE_SOURCES 0x00001FFF - -#define PM_S0I3_COMMAND \ - ((0 << 31) | /* Reserved */ \ - (0 << 30) | /* Core must be idle */ \ - (0xc2 << 22) | /* ACK C6 trigger */ \ - (3 << 19) | /* Trigger on DMI message */ \ - (3 << 16) | /* Enter S0i3 */ \ - (0 << 13) | /* Numeric mode ID (sw) */ \ - (3 << 9) | /* Trigger mode */ \ - (0 << 8) | /* Do not interrupt */ \ - (1 << 0)) /* Set configuration */ - -#define LSS_DMI 0 -#define LSS_SD_HC0 1 -#define LSS_SD_HC1 2 -#define LSS_NAND 3 -#define LSS_IMAGING 4 -#define LSS_SECURITY 5 -#define LSS_DISPLAY 6 -#define LSS_USB_HC 7 -#define LSS_USB_OTG 8 -#define LSS_AUDIO 9 -#define LSS_AUDIO_LPE 9 -#define LSS_AUDIO_SSP 9 -#define LSS_I2C0 10 -#define LSS_I2C1 10 -#define LSS_I2C2 10 -#define LSS_KBD 10 -#define LSS_SPI0 10 -#define LSS_SPI1 10 -#define LSS_SPI2 10 -#define LSS_GPIO 10 -#define LSS_SRAM 11 /* used by SCU, do not touch */ -#define LSS_SD_HC2 12 -/* LSS hardware bits 15,14,13 are hardwired to 0, thus unusable */ -#define MRST_NUM_LSS 13 - -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) - -#define SSMSK(mask, lss) ((mask) << ((lss) * 2)) -#define D0 0 -#define D0i1 1 -#define D0i2 2 -#define D0i3 3 - -#define S0I3_SSS_TARGET ( \ - SSMSK(D0i1, LSS_DMI) | \ - SSMSK(D0i3, LSS_SD_HC0) | \ - SSMSK(D0i3, LSS_SD_HC1) | \ - SSMSK(D0i3, LSS_NAND) | \ - SSMSK(D0i3, LSS_SD_HC2) | \ - SSMSK(D0i3, LSS_IMAGING) | \ - SSMSK(D0i3, LSS_SECURITY) | \ - SSMSK(D0i3, LSS_DISPLAY) | \ - SSMSK(D0i3, LSS_USB_HC) | \ - SSMSK(D0i3, LSS_USB_OTG) | \ - SSMSK(D0i3, LSS_AUDIO) | \ - SSMSK(D0i1, LSS_I2C0)) - -/* - * D0i1 on Langwell is Autonomous Clock Gating (ACG). - * Enable ACG on every LSS except camera and audio - */ -#define D0I1_ACG_SSS_TARGET \ - (SUB_SYS_ALL_D0I1 & ~SSMSK(D0i1, LSS_IMAGING) & ~SSMSK(D0i1, LSS_AUDIO)) - -enum cm_mode { - CM_NOP, /* ignore the config mode value */ - CM_IMMEDIATE, - CM_DELAY, - CM_TRIGGER, - CM_INVALID -}; - -enum sys_state { - SYS_STATE_S0I0, - SYS_STATE_S0I1, - SYS_STATE_S0I2, - SYS_STATE_S0I3, - SYS_STATE_S3, - SYS_STATE_S5 -}; - -#define SET_CFG_CMD 1 - -enum int_status { - INT_SPURIOUS = 0, - INT_CMD_DONE = 1, - INT_CMD_ERR = 2, - INT_WAKE_RX = 3, - INT_SS_ERROR = 4, - INT_S0IX_MISS = 5, - INT_NO_ACKC6 = 6, - INT_INVALID = 7, -}; - -/* PMU register interface */ -static struct mrst_pmu_reg { - u32 pm_sts; /* 0x00 */ - u32 pm_cmd; /* 0x04 */ - u32 pm_ics; /* 0x08 */ - u32 _resv1; /* 0x0C */ - u32 pm_wkc[2]; /* 0x10 */ - u32 pm_wks[2]; /* 0x18 */ - u32 pm_ssc[4]; /* 0x20 */ - u32 pm_sss[4]; /* 0x30 */ - u32 pm_wssc[4]; /* 0x40 */ - u32 pm_c3c4; /* 0x50 */ - u32 pm_c5c6; /* 0x54 */ - u32 pm_msi_disable; /* 0x58 */ -} *pmu_reg; - -static inline u32 pmu_read_sts(void) { return readl(&pmu_reg->pm_sts); } -static inline u32 pmu_read_ics(void) { return readl(&pmu_reg->pm_ics); } -static inline u32 pmu_read_wks(void) { return readl(&pmu_reg->pm_wks[0]); } -static inline u32 pmu_read_sss(void) { return readl(&pmu_reg->pm_sss[0]); } - -static inline void pmu_write_cmd(u32 arg) { writel(arg, &pmu_reg->pm_cmd); } -static inline void pmu_write_ics(u32 arg) { writel(arg, &pmu_reg->pm_ics); } -static inline void pmu_write_wkc(u32 arg) { writel(arg, &pmu_reg->pm_wkc[0]); } -static inline void pmu_write_ssc(u32 arg) { writel(arg, &pmu_reg->pm_ssc[0]); } -static inline void pmu_write_wssc(u32 arg) - { writel(arg, &pmu_reg->pm_wssc[0]); } - -static inline void pmu_msi_enable(void) { writel(0, &pmu_reg->pm_msi_disable); } -static inline u32 pmu_msi_is_disabled(void) - { return readl(&pmu_reg->pm_msi_disable); } - -union pmu_pm_ics { - struct { - u32 cause:8; - u32 enable:1; - u32 pending:1; - u32 reserved:22; - } bits; - u32 value; -}; - -static inline void pmu_irq_enable(void) -{ - union pmu_pm_ics pmu_ics; - - pmu_ics.value = pmu_read_ics(); - pmu_ics.bits.enable = 1; - pmu_write_ics(pmu_ics.value); -} - -union pmu_pm_status { - struct { - u32 pmu_rev:8; - u32 pmu_busy:1; - u32 mode_id:4; - u32 Reserved:19; - } pmu_status_parts; - u32 pmu_status_value; -}; - -static inline int pmu_read_busy_status(void) -{ - union pmu_pm_status result; - - result.pmu_status_value = pmu_read_sts(); - - return result.pmu_status_parts.pmu_busy; -} - -/* pmu set config parameters */ -struct cfg_delay_param_t { - u32 cmd:8; - u32 ioc:1; - u32 cfg_mode:4; - u32 mode_id:3; - u32 sys_state:3; - u32 cfg_delay:8; - u32 rsvd:5; -}; - -struct cfg_trig_param_t { - u32 cmd:8; - u32 ioc:1; - u32 cfg_mode:4; - u32 mode_id:3; - u32 sys_state:3; - u32 cfg_trig_type:3; - u32 cfg_trig_val:8; - u32 cmbi:1; - u32 rsvd1:1; -}; - -union pmu_pm_set_cfg_cmd_t { - union { - struct cfg_delay_param_t d_param; - struct cfg_trig_param_t t_param; - } pmu2_params; - u32 pmu_pm_set_cfg_cmd_value; -}; - -#ifdef FUTURE_PATCH -extern int mrst_s0i3_entry(u32 regval, u32 *regaddr); -#else -static inline int mrst_s0i3_entry(u32 regval, u32 *regaddr) { return -1; } -#endif -#endif diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c index 2b235b77d9ab..23e5b9d7977b 100644 --- a/arch/x86/platform/olpc/olpc-xo15-sci.c +++ b/arch/x86/platform/olpc/olpc-xo15-sci.c @@ -23,7 +23,66 @@ #define XO15_SCI_CLASS DRV_NAME #define XO15_SCI_DEVICE_NAME "OLPC XO-1.5 SCI" -static unsigned long xo15_sci_gpe; +static unsigned long xo15_sci_gpe; +static bool lid_wake_on_close; + +/* + * The normal ACPI LID wakeup behavior is wake-on-open, but not + * wake-on-close. This is implemented as standard by the XO-1.5 DSDT. + * + * We provide here a sysfs attribute that will additionally enable + * wake-on-close behavior. This is useful (e.g.) when we oportunistically + * suspend with the display running; if the lid is then closed, we want to + * wake up to turn the display off. + * + * This is controlled through a custom method in the XO-1.5 DSDT. + */ +static int set_lid_wake_behavior(bool wake_on_close) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = wake_on_close; + + status = acpi_evaluate_object(NULL, "\\_SB.PCI0.LID.LIDW", &arg_list, NULL); + if (ACPI_FAILURE(status)) { + pr_warning(PFX "failed to set lid behavior\n"); + return 1; + } + + lid_wake_on_close = wake_on_close; + + return 0; +} + +static ssize_t +lid_wake_on_close_show(struct kobject *s, struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%u\n", lid_wake_on_close); +} + +static ssize_t lid_wake_on_close_store(struct kobject *s, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned int val; + + if (sscanf(buf, "%u", &val) != 1) + return -EINVAL; + + set_lid_wake_behavior(!!val); + + return n; +} + +static struct kobj_attribute lid_wake_on_close_attr = + __ATTR(lid_wake_on_close, 0644, + lid_wake_on_close_show, + lid_wake_on_close_store); static void battery_status_changed(void) { @@ -91,6 +150,7 @@ static int xo15_sci_add(struct acpi_device *device) { unsigned long long tmp; acpi_status status; + int r; if (!device) return -EINVAL; @@ -112,6 +172,10 @@ static int xo15_sci_add(struct acpi_device *device) dev_info(&device->dev, "Initialized, GPE = 0x%lx\n", xo15_sci_gpe); + r = sysfs_create_file(&device->dev.kobj, &lid_wake_on_close_attr.attr); + if (r) + goto err_sysfs; + /* Flush queue, and enable all SCI events */ process_sci_queue(); olpc_ec_mask_write(EC_SCI_SRC_ALL); @@ -123,6 +187,11 @@ static int xo15_sci_add(struct acpi_device *device) device_init_wakeup(&device->dev, true); return 0; + +err_sysfs: + acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler); + cancel_work_sync(&sci_work); + return r; } static int xo15_sci_remove(struct acpi_device *device, int type) @@ -130,6 +199,7 @@ static int xo15_sci_remove(struct acpi_device *device, int type) acpi_disable_gpe(NULL, xo15_sci_gpe); acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler); cancel_work_sync(&sci_work); + sysfs_remove_file(&device->dev.kobj, &lid_wake_on_close_attr.attr); return 0; } |