MIPS: Consolidate idle loop / WAIT instruction support in a single file.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

4 files changed, 233 insertions, 212 deletions

diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 6ad9e04bdf62..423d871a946b 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -4,7 +4,7 @@
 
 extra-y		:= head.o vmlinux.lds
 
-obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
+obj-y		+= cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
 		   prom.o ptrace.o reset.o setup.o signal.o syscall.o \
 		   time.o topology.o traps.o unaligned.o watch.o vdso.o
 
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 4bbffdb9024f..c6568bf4b1b0 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -27,105 +27,6 @@
 #include <asm/spram.h>
 #include <asm/uaccess.h>
 
-/*
- * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
- * the implementation of the "wait" feature differs between CPU families. This
- * points to the function that implements CPU specific wait.
- * The wait instruction stops the pipeline and reduces the power consumption of
- * the CPU very much.
- */
-void (*cpu_wait)(void);
-EXPORT_SYMBOL(cpu_wait);
-
-static void r3081_wait(void)
-{
-	unsigned long cfg = read_c0_conf();
-	write_c0_conf(cfg | R30XX_CONF_HALT);
-}
-
-static void r39xx_wait(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
-	local_irq_enable();
-}
-
-extern void r4k_wait(void);
-
-/*
- * This variant is preferable as it allows testing need_resched and going to
- * sleep depending on the outcome atomically.  Unfortunately the "It is
- * implementation-dependent whether the pipeline restarts when a non-enabled
- * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
- * using this version a gamble.
- */
-void r4k_wait_irqoff(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		__asm__("	.set	push		\n"
-			"	.set	mips3		\n"
-			"	wait			\n"
-			"	.set	pop		\n");
-	local_irq_enable();
-	__asm__("	.globl __pastwait	\n"
-		"__pastwait:			\n");
-}
-
-/*
- * The RM7000 variant has to handle erratum 38.	 The workaround is to not
- * have any pending stores when the WAIT instruction is executed.
- */
-static void rm7k_wait_irqoff(void)
-{
-	local_irq_disable();
-	if (!need_resched())
-		__asm__(
-		"	.set	push					\n"
-		"	.set	mips3					\n"
-		"	.set	noat					\n"
-		"	mfc0	$1, $12					\n"
-		"	sync						\n"
-		"	mtc0	$1, $12		# stalls until W stage	\n"
-		"	wait						\n"
-		"	mtc0	$1, $12		# stalls until W stage	\n"
-		"	.set	pop					\n");
-	local_irq_enable();
-}
-
-/*
- * The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter.
- * alchemy/common/time.c may override cpu_wait!
- */
-static void au1k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	cache	0x14, 0(%0)		\n"
-		"	cache	0x14, 32(%0)		\n"
-		"	sync				\n"
-		"	nop				\n"
-		"	wait				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	.set	mips0			\n"
-		: : "r" (au1k_wait));
-}
-
-static int __initdata nowait;
-
-static int __init wait_disable(char *s)
-{
-	nowait = 1;
-
-	return 1;
-}
-
-__setup("nowait", wait_disable);
-
 static int __cpuinitdata mips_fpu_disabled;
 
 static int __init fpu_disable(char *s)
@@ -150,105 +51,6 @@ static int __init dsp_disable(char *s)
 
 __setup("nodsp", dsp_disable);
 
-void __init check_wait(void)
-{
-	struct cpuinfo_mips *c = &current_cpu_data;
-
-	if (nowait) {
-		printk("Wait instruction disabled.\n");
-		return;
-	}
-
-	switch (c->cputype) {
-	case CPU_R3081:
-	case CPU_R3081E:
-		cpu_wait = r3081_wait;
-		break;
-	case CPU_TX3927:
-		cpu_wait = r39xx_wait;
-		break;
-	case CPU_R4200:
-/*	case CPU_R4300: */
-	case CPU_R4600:
-	case CPU_R4640:
-	case CPU_R4650:
-	case CPU_R4700:
-	case CPU_R5000:
-	case CPU_R5500:
-	case CPU_NEVADA:
-	case CPU_4KC:
-	case CPU_4KEC:
-	case CPU_4KSC:
-	case CPU_5KC:
-	case CPU_25KF:
-	case CPU_PR4450:
-	case CPU_BMIPS3300:
-	case CPU_BMIPS4350:
-	case CPU_BMIPS4380:
-	case CPU_BMIPS5000:
-	case CPU_CAVIUM_OCTEON:
-	case CPU_CAVIUM_OCTEON_PLUS:
-	case CPU_CAVIUM_OCTEON2:
-	case CPU_JZRISC:
-	case CPU_LOONGSON1:
-	case CPU_XLR:
-	case CPU_XLP:
-		cpu_wait = r4k_wait;
-		break;
-
-	case CPU_RM7000:
-		cpu_wait = rm7k_wait_irqoff;
-		break;
-
-	case CPU_M14KC:
-	case CPU_M14KEC:
-	case CPU_24K:
-	case CPU_34K:
-	case CPU_1004K:
-		cpu_wait = r4k_wait;
-		if (read_c0_config7() & MIPS_CONF7_WII)
-			cpu_wait = r4k_wait_irqoff;
-		break;
-
-	case CPU_74K:
-		cpu_wait = r4k_wait;
-		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
-			cpu_wait = r4k_wait_irqoff;
-		break;
-
-	case CPU_TX49XX:
-		cpu_wait = r4k_wait_irqoff;
-		break;
-	case CPU_ALCHEMY:
-		cpu_wait = au1k_wait;
-		break;
-	case CPU_20KC:
-		/*
-		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
-		 * WAIT on Rev2.0 and Rev3.0 has E16.
-		 * Rev3.1 WAIT is nop, why bother
-		 */
-		if ((c->processor_id & 0xff) <= 0x64)
-			break;
-
-		/*
-		 * Another rev is incremeting c0_count at a reduced clock
-		 * rate while in WAIT mode.  So we basically have the choice
-		 * between using the cp0 timer as clocksource or avoiding
-		 * the WAIT instruction.  Until more details are known,
-		 * disable the use of WAIT for 20Kc entirely.
-		   cpu_wait = r4k_wait;
-		 */
-		break;
-	case CPU_RM9000:
-		if ((c->processor_id & 0x00ff) >= 0x40)
-			cpu_wait = r4k_wait;
-		break;
-	default:
-		break;
-	}
-}
-
 static inline void check_errata(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
new file mode 100644
index 000000000000..1e9d9383d49f
--- /dev/null
+++ b/arch/mips/kernel/idle.c
@@ -0,0 +1,232 @@
+/*
+ * MIPS idle loop and WAIT instruction support.
+ *
+ * Copyright (C) xxxx  the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/printk.h>
+#include <linux/sched.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/mipsregs.h>
+
+/*
+ * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
+ * the implementation of the "wait" feature differs between CPU families. This
+ * points to the function that implements CPU specific wait.
+ * The wait instruction stops the pipeline and reduces the power consumption of
+ * the CPU very much.
+ */
+void (*cpu_wait)(void);
+EXPORT_SYMBOL(cpu_wait);
+
+static void r3081_wait(void)
+{
+	unsigned long cfg = read_c0_conf();
+	write_c0_conf(cfg | R30XX_CONF_HALT);
+}
+
+static void r39xx_wait(void)
+{
+	local_irq_disable();
+	if (!need_resched())
+		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
+	local_irq_enable();
+}
+
+extern void r4k_wait(void);
+
+/*
+ * This variant is preferable as it allows testing need_resched and going to
+ * sleep depending on the outcome atomically.  Unfortunately the "It is
+ * implementation-dependent whether the pipeline restarts when a non-enabled
+ * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
+ * using this version a gamble.
+ */
+void r4k_wait_irqoff(void)
+{
+	local_irq_disable();
+	if (!need_resched())
+		__asm__("	.set	push		\n"
+			"	.set	mips3		\n"
+			"	wait			\n"
+			"	.set	pop		\n");
+	local_irq_enable();
+	__asm__("	.globl __pastwait	\n"
+		"__pastwait:			\n");
+}
+
+/*
+ * The RM7000 variant has to handle erratum 38.	 The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
+{
+	local_irq_disable();
+	if (!need_resched())
+		__asm__(
+		"	.set	push					\n"
+		"	.set	mips3					\n"
+		"	.set	noat					\n"
+		"	mfc0	$1, $12					\n"
+		"	sync						\n"
+		"	mtc0	$1, $12		# stalls until W stage	\n"
+		"	wait						\n"
+		"	mtc0	$1, $12		# stalls until W stage	\n"
+		"	.set	pop					\n");
+	local_irq_enable();
+}
+
+/*
+ * The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter.
+ * alchemy/common/time.c may override cpu_wait!
+ */
+static void au1k_wait(void)
+{
+	__asm__("	.set	mips3			\n"
+		"	cache	0x14, 0(%0)		\n"
+		"	cache	0x14, 32(%0)		\n"
+		"	sync				\n"
+		"	nop				\n"
+		"	wait				\n"
+		"	nop				\n"
+		"	nop				\n"
+		"	nop				\n"
+		"	nop				\n"
+		"	.set	mips0			\n"
+		: : "r" (au1k_wait));
+}
+
+static int __initdata nowait;
+
+static int __init wait_disable(char *s)
+{
+	nowait = 1;
+
+	return 1;
+}
+
+__setup("nowait", wait_disable);
+
+void __init check_wait(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	if (nowait) {
+		printk("Wait instruction disabled.\n");
+		return;
+	}
+
+	switch (c->cputype) {
+	case CPU_R3081:
+	case CPU_R3081E:
+		cpu_wait = r3081_wait;
+		break;
+	case CPU_TX3927:
+		cpu_wait = r39xx_wait;
+		break;
+	case CPU_R4200:
+/*	case CPU_R4300: */
+	case CPU_R4600:
+	case CPU_R4640:
+	case CPU_R4650:
+	case CPU_R4700:
+	case CPU_R5000:
+	case CPU_R5500:
+	case CPU_NEVADA:
+	case CPU_4KC:
+	case CPU_4KEC:
+	case CPU_4KSC:
+	case CPU_5KC:
+	case CPU_25KF:
+	case CPU_PR4450:
+	case CPU_BMIPS3300:
+	case CPU_BMIPS4350:
+	case CPU_BMIPS4380:
+	case CPU_BMIPS5000:
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+	case CPU_JZRISC:
+	case CPU_LOONGSON1:
+	case CPU_XLR:
+	case CPU_XLP:
+		cpu_wait = r4k_wait;
+		break;
+
+	case CPU_RM7000:
+		cpu_wait = rm7k_wait_irqoff;
+		break;
+
+	case CPU_M14KC:
+	case CPU_M14KEC:
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_1004K:
+		cpu_wait = r4k_wait;
+		if (read_c0_config7() & MIPS_CONF7_WII)
+			cpu_wait = r4k_wait_irqoff;
+		break;
+
+	case CPU_74K:
+		cpu_wait = r4k_wait;
+		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+			cpu_wait = r4k_wait_irqoff;
+		break;
+
+	case CPU_TX49XX:
+		cpu_wait = r4k_wait_irqoff;
+		break;
+	case CPU_ALCHEMY:
+		cpu_wait = au1k_wait;
+		break;
+	case CPU_20KC:
+		/*
+		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
+		 * WAIT on Rev2.0 and Rev3.0 has E16.
+		 * Rev3.1 WAIT is nop, why bother
+		 */
+		if ((c->processor_id & 0xff) <= 0x64)
+			break;
+
+		/*
+		 * Another rev is incremeting c0_count at a reduced clock
+		 * rate while in WAIT mode.  So we basically have the choice
+		 * between using the cp0 timer as clocksource or avoiding
+		 * the WAIT instruction.  Until more details are known,
+		 * disable the use of WAIT for 20Kc entirely.
+		   cpu_wait = r4k_wait;
+		 */
+		break;
+	case CPU_RM9000:
+		if ((c->processor_id & 0x00ff) >= 0x40)
+			cpu_wait = r4k_wait;
+		break;
+	default:
+		break;
+	}
+}
+
+void arch_cpu_idle(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern void smtc_idle_loop_hook(void);
+
+	smtc_idle_loop_hook();
+#endif
+	if (cpu_wait)
+		(*cpu_wait)();
+	else
+		local_irq_enable();
+}
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index a682a87bcc04..c6a041d9d05d 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -51,19 +51,6 @@ void arch_cpu_idle_dead(void)
 }
 #endif
 
-void arch_cpu_idle(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-	extern void smtc_idle_loop_hook(void);
-
-	smtc_idle_loop_hook();
-#endif
-	if (cpu_wait)
-		(*cpu_wait)();
-	else
-		local_irq_enable();
-}
-
 asmlinkage void ret_from_fork(void);
 asmlinkage void ret_from_kernel_thread(void);