Merge branch 'next' into for-linus

Prepare input updates for 4.19 merge window.

14 files changed, 17 insertions, 30 deletions

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 77e8436beed4..3a1c6b45c9a1 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -76,7 +76,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
 			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
 				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
-				 <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
 				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
@@ -88,7 +88,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
 			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
 				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
-				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
 		};
@@ -99,7 +99,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
 			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
 				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
-				 <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
 				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 3328fe583c9b..232f124ce62c 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -117,6 +117,7 @@
 	phy-handle = <&int_mii_phy>;
 	phy-mode = "mii";
 	allwinner,leds-active-low;
+	status = "okay";
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
index d1311098ea45..ad173605b1b8 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -51,7 +51,7 @@
 
 	leds {
 		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
-		status = "disbaled";
+		status = "disabled";
 	};
 };
 
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index e70feec6fad5..0581ffbedddd 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -323,7 +323,7 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 
 /* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
 static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		/* Use local offsets on gpiochip/port "G" */
 		GPIO_LOOKUP_IDX("G", 1, NULL, 0,
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 77def6169f50..44cbbce6bda6 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -51,7 +51,7 @@ static struct platform_device avila_flash = {
 };
 
 static struct gpiod_lookup_table avila_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 0f5c99941a7d..397190f3a8da 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -70,7 +70,7 @@ static struct platform_device dsmg600_flash = {
 };
 
 static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 033f79b35d51..f0a152e365b1 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -56,7 +56,7 @@ static struct platform_device fsg_flash = {
 };
 
 static struct gpiod_lookup_table fsg_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index b168e2fbdbeb..3ec829d52cdd 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -124,7 +124,7 @@ static struct platform_device ixdp425_flash_nand = {
 #endif	/* CONFIG_MTD_NAND_PLATFORM */
 
 static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 76dfff03cb71..4138d6aa4c52 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -102,7 +102,7 @@ static struct platform_device nas100d_leds = {
 };
 
 static struct gpiod_lookup_table nas100d_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 91da63a7d7b5..341b263482ef 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -70,7 +70,7 @@ static struct platform_device nslu2_flash = {
 };
 
 static struct gpiod_lookup_table nslu2_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 5877e547cecd..0adb1bd6208e 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -322,7 +322,7 @@ static struct soc_camera_link palmz72_iclink = {
 };
 
 static struct gpiod_lookup_table palmz72_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0,
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 90d0f277de55..207dcc2e94e7 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -460,7 +460,7 @@ static struct platform_device smc91x_device = {
 
 /* i2c */
 static struct gpiod_lookup_table viper_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.1",
 	.table		= {
 		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
@@ -789,7 +789,7 @@ static int __init viper_tpm_setup(char *str)
 __setup("tpm=", viper_tpm_setup);
 
 struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio",
+	.dev_id = "i2c-gpio.2",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index ace010479eb6..f45aed2519ba 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -327,7 +327,7 @@ static struct platform_device simpad_gpio_leds = {
  * i2c
  */
 static struct gpiod_lookup_table simpad_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio",
+	.dev_id = "i2c-gpio.0",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio", 21, NULL, 0,
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 8c398fedbbb6..ada8eb206a90 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -466,12 +466,6 @@ void __init dma_contiguous_early_fixup(phys_addr_t base, unsigned long size)
 void __init dma_contiguous_remap(void)
 {
 	int i;
-
-	if (!dma_mmu_remap_num)
-		return;
-
-	/* call flush_cache_all() since CMA area would be large enough */
-	flush_cache_all();
 	for (i = 0; i < dma_mmu_remap_num; i++) {
 		phys_addr_t start = dma_mmu_remap[i].base;
 		phys_addr_t end = start + dma_mmu_remap[i].size;
@@ -504,15 +498,7 @@ void __init dma_contiguous_remap(void)
 		flush_tlb_kernel_range(__phys_to_virt(start),
 				       __phys_to_virt(end));
 
-		/*
-		 * All the memory in CMA region will be on ZONE_MOVABLE.
-		 * If that zone is considered as highmem, the memory in CMA
-		 * region is also considered as highmem even if it's
-		 * physical address belong to lowmem. In this case,
-		 * re-mapping isn't required.
-		 */
-		if (!is_highmem_idx(ZONE_MOVABLE))
-			iotable_init(&map, 1);
+		iotable_init(&map, 1);
 	}
 }