diff options
| author | Russell King <rmk+kernel@arm.linux.org.uk> | 2013-10-28 00:43:41 +0000 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2013-10-30 22:20:26 +0000 |
| commit | 2098990e7c558c175b96213d41058983e00a7919 (patch) | |
| tree | 361449d9c852d07544b16dd0daec5a72541e8bda /arch/arm | |
| parent | 5e4432d3bd6b5b19e10bb263e7dbe8e74d7cf1c2 (diff) | |
| parent | fdb07aee0b2b9d7d1893c97f5ce79ec355caaf1f (diff) | |
| download | linux-2098990e7c558c175b96213d41058983e00a7919.tar.bz2 | |
Merge branch 'baserock/bjdooks/312-rc4/be/core-v3' of git://git.baserock.org/delta/linux into devel-stable
Conflicts:
arch/arm/kernel/head.S
This series has been well tested and it would be great to get this
merged now.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm')
63 files changed, 452 insertions, 188 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3917dd4f270c..585218778a1b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -483,6 +483,7 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK + select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CPU_XSCALE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a37a50f575a2..00696973d88d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -16,6 +16,7 @@ LDFLAGS := LDFLAGS_vmlinux :=-p --no-undefined -X ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 +LDFLAGS_MODULE += --be8 endif OBJCOPYFLAGS :=-O binary -R .comment -S diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 75189f13cf54..066b03480b63 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -135,6 +135,7 @@ start: .word _edata @ zImage end address THUMB( .thumb ) 1: + ARM_BE8( setend be ) @ go BE8 if compiled for BE8 mrs r9, cpsr #ifdef CONFIG_ARM_VIRT_EXT bl __hyp_stub_install @ get into SVC mode, reversibly @@ -699,9 +700,7 @@ __armv4_mmu_cache_on: mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x0030 -#ifdef CONFIG_CPU_ENDIAN_BE8 - orr r0, r0, #1 << 25 @ big-endian page tables -#endif + ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables bl __common_mmu_cache_on mov r0, #0 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs @@ -728,9 +727,7 @@ __armv7_mmu_cache_on: orr r0, r0, #1 << 22 @ U (v6 unaligned access model) @ (needed for ARM1176) #ifdef CONFIG_MMU -#ifdef CONFIG_CPU_ENDIAN_BE8 - orr r0, r0, #1 << 25 @ big-endian page tables -#endif + ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e95af3f5433b..802720e3e8fd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ bcm28155-ap.dtb diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 05e4485a8225..8ac2ac1f69cc 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -27,6 +27,25 @@ }; soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Connected to Marvell SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -57,6 +76,11 @@ marvell,pins = "mpp56"; marvell,function = "gpio"; }; + + poweroff: poweroff { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; }; mdio { @@ -89,22 +113,6 @@ pwm_polarity = <0>; }; }; - - pcie-controller { - status = "okay"; - - /* Connected to Marvell SATA controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to FL1009 USB 3.0 controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; @@ -160,7 +168,7 @@ button@1 { label = "Power Button"; linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 30 1>; + gpios = <&gpio1 30 0>; }; button@2 { @@ -176,4 +184,11 @@ }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 8 1>; + }; + }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index def125c0eeaa..3058522f5aad 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -70,6 +70,8 @@ timer@20300 { compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; }; coreclk: mvebu-sar@18230 { @@ -169,4 +171,13 @@ }; }; }; + + clocks { + /* 25 MHz reference crystal */ + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index cf78ac0b04b1..e74dc15efa9d 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -190,12 +190,12 @@ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; - pinctrl_uart2_rts: uart2_rts-0 { + pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; - pinctrl_uart2_cts: uart2_cts-0 { + pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; @@ -556,6 +556,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -567,6 +568,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 8678e0c11119..6db4f81d4795 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -181,6 +181,8 @@ interrupts = <17>; fifosize = <128>; clocks = <&clks 13>; + sirf,uart-dma-rx-channel = <21>; + sirf,uart-dma-tx-channel = <2>; }; uart1: uart@b0060000 { @@ -199,6 +201,8 @@ interrupts = <19>; fifosize = <128>; clocks = <&clks 15>; + sirf,uart-dma-rx-channel = <6>; + sirf,uart-dma-tx-channel = <7>; }; usp0: usp@b0080000 { @@ -206,7 +210,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + fifosize = <128>; clocks = <&clks 28>; + sirf,usp-dma-rx-channel = <17>; + sirf,usp-dma-tx-channel = <18>; }; usp1: usp@b0090000 { @@ -214,7 +221,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + fifosize = <128>; clocks = <&clks 29>; + sirf,usp-dma-rx-channel = <14>; + sirf,usp-dma-tx-channel = <15>; }; dmac0: dma-controller@b00b0000 { @@ -237,6 +247,8 @@ compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; clocks = <&clks 31>; + interrupts = <14>; + sirf,vip-dma-rx-channel = <16>; }; spi0: spi@b00d0000 { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cf7aeaf89e9c..1335b2e1bed4 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -13,6 +13,7 @@ cpu@0 { device_type = "cpu"; compatible = "marvell,feroceon"; + reg = <0>; clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; clock-names = "cpu_clk", "ddrclk", "powersave"; }; @@ -167,7 +168,7 @@ xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 - 0xd0B00 0x100>; + 0x60B00 0x100>; status = "okay"; clocks = <&gate_clk 16>; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index bbeb623fc2c6..27ed9f5144bc 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -171,7 +171,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0xb0000000 0xb0000000 0x180000>; + ranges = <0xb0000000 0xb0000000 0x180000>, + <0x56000000 0x56000000 0x1b00000>; timer@b0020000 { compatible = "sirf,prima2-tick"; @@ -196,25 +197,32 @@ uart0: uart@b0050000 { cell-index = <0>; compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x10000>; + reg = <0xb0050000 0x1000>; interrupts = <17>; + fifosize = <128>; clocks = <&clks 13>; + sirf,uart-dma-rx-channel = <21>; + sirf,uart-dma-tx-channel = <2>; }; uart1: uart@b0060000 { cell-index = <1>; compatible = "sirf,prima2-uart"; - reg = <0xb0060000 0x10000>; + reg = <0xb0060000 0x1000>; interrupts = <18>; + fifosize = <32>; clocks = <&clks 14>; }; uart2: uart@b0070000 { cell-index = <2>; compatible = "sirf,prima2-uart"; - reg = <0xb0070000 0x10000>; + reg = <0xb0070000 0x1000>; interrupts = <19>; + fifosize = <128>; clocks = <&clks 15>; + sirf,uart-dma-rx-channel = <6>; + sirf,uart-dma-tx-channel = <7>; }; usp0: usp@b0080000 { @@ -222,7 +230,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + fifosize = <128>; clocks = <&clks 28>; + sirf,usp-dma-rx-channel = <17>; + sirf,usp-dma-tx-channel = <18>; }; usp1: usp@b0090000 { @@ -230,7 +241,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + fifosize = <128>; clocks = <&clks 29>; + sirf,usp-dma-rx-channel = <14>; + sirf,usp-dma-tx-channel = <15>; }; usp2: usp@b00a0000 { @@ -238,7 +252,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb00a0000 0x10000>; interrupts = <22>; + fifosize = <128>; clocks = <&clks 30>; + sirf,usp-dma-rx-channel = <10>; + sirf,usp-dma-tx-channel = <11>; }; dmac0: dma-controller@b00b0000 { @@ -261,6 +278,8 @@ compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; clocks = <&clks 31>; + interrupts = <14>; + sirf,vip-dma-rx-channel = <16>; }; spi0: spi@b00d0000 { diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 6c26caa880f2..658fcc537576 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -193,7 +193,7 @@ }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 165 4>; @@ -202,7 +202,7 @@ }; sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 166 4>; @@ -211,7 +211,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 167 4>; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 45ac404ab6d8..3577aba82583 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -96,6 +96,5 @@ pfc: pfc@fffc0000 { compatible = "renesas,pfc-r8a7778"; reg = <0xfffc000 0x118>; - #gpio-range-cells = <3>; }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 23a62447359c..ebbe507fcbfa 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -188,7 +188,6 @@ pfc: pfc@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; - #gpio-range-cells = <3>; }; thermal@ffc48000 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 3b879e7c697c..413b4c29e782 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -148,11 +148,10 @@ pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7790"; reg = <0 0xe6060000 0 0x250>; - #gpio-range-cells = <3>; }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 165 4>; @@ -161,7 +160,7 @@ }; sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 166 4>; @@ -170,7 +169,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 167 4>; @@ -179,7 +178,7 @@ }; sdhi3: sdhi@ee160000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 168 4>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index ba59a5875a10..3955c7606a6f 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -196,7 +196,7 @@ }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee100000 0x100>; interrupt-parent = <&gic>; interrupts = <0 83 4 @@ -208,7 +208,7 @@ /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee120000 0x100>; interrupt-parent = <&gic>; interrupts = <0 88 4 @@ -219,7 +219,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee140000 0x100>; interrupt-parent = <&gic>; interrupts = <0 104 4 diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 117f955a2a06..8e1a0245907f 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = { .ccnt = 1, }; +static const struct of_device_id edma_of_ids[] = { + { .compatible = "ti,edma3", }, + {} +}; + /*****************************************************************************/ static void map_dmach_queue(unsigned ctlr, unsigned ch_no, @@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id, static int prepare_unused_channel_list(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); - int i, ctlr; + int i, count, ctlr; + struct of_phandle_args dma_spec; + if (dev->of_node) { + count = of_property_count_strings(dev->of_node, "dma-names"); + if (count < 0) + return 0; + for (i = 0; i < count; i++) { + if (of_parse_phandle_with_args(dev->of_node, "dmas", + "#dma-cells", i, + &dma_spec)) + continue; + + if (!of_match_node(edma_of_ids, dma_spec.np)) { + of_node_put(dma_spec.np); + continue; + } + + clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]), + edma_cc[0]->edma_unused); + of_node_put(dma_spec.np); + } + return 0; + } + + /* For non-OF case */ for (i = 0; i < pdev->num_resources; i++) { if ((pdev->resource[i].flags & IORESOURCE_DMA) && (int)pdev->resource[i].start >= 0) { ctlr = EDMA_CTLR(pdev->resource[i].start); clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start), - edma_cc[ctlr]->edma_unused); + edma_cc[ctlr]->edma_unused); } } @@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev) return 0; } -static const struct of_device_id edma_of_ids[] = { - { .compatible = "ti,edma3", }, - {} -}; - static struct platform_driver edma_driver = { .driver = { .name = "edma", diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S index 49dd5352fe70..e02db4b81a66 100644 --- a/arch/arm/common/mcpm_head.S +++ b/arch/arm/common/mcpm_head.S @@ -15,6 +15,7 @@ #include <linux/linkage.h> #include <asm/mcpm.h> +#include <asm/assembler.h> #include "vlock.h" @@ -47,6 +48,7 @@ ENTRY(mcpm_entry_point) + ARM_BE8(setend be) THUMB( adr r12, BSYM(1f) ) THUMB( bx r12 ) THUMB( .thumb ) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index f3935b46df29..119fc378fc52 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -135,6 +135,7 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_OMAP=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index fcc1b5bf6979..5c2285160575 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -53,6 +53,13 @@ #define put_byte_3 lsl #0 #endif +/* Select code for any configuration running in BE8 mode */ +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define ARM_BE8(code...) code +#else +#define ARM_BE8(code...) +#endif + /* * Data preload for architectures that support it */ diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 55ffc3b850f4..134aa28b6f64 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -307,8 +307,8 @@ static inline void atomic64_add(u64 i, atomic64_t *v) prefetchw(&v->counter); __asm__ __volatile__("@ atomic64_add\n" "1: ldrexd %0, %H0, [%3]\n" -" adds %0, %0, %4\n" -" adc %H0, %H0, %H4\n" +" adds %Q0, %Q0, %Q4\n" +" adc %R0, %R0, %R4\n" " strexd %1, %0, %H0, [%3]\n" " teq %1, #0\n" " bne 1b" @@ -326,8 +326,8 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v) __asm__ __volatile__("@ atomic64_add_return\n" "1: ldrexd %0, %H0, [%3]\n" -" adds %0, %0, %4\n" -" adc %H0, %H0, %H4\n" +" adds %Q0, %Q0, %Q4\n" +" adc %R0, %R0, %R4\n" " strexd %1, %0, %H0, [%3]\n" " teq %1, #0\n" " bne 1b" @@ -348,8 +348,8 @@ static inline void atomic64_sub(u64 i, atomic64_t *v) prefetchw(&v->counter); __asm__ __volatile__("@ atomic64_sub\n" "1: ldrexd %0, %H0, [%3]\n" -" subs %0, %0, %4\n" -" sbc %H0, %H0, %H4\n" +" subs %Q0, %Q0, %Q4\n" +" sbc %R0, %R0, %R4\n" " strexd %1, %0, %H0, [%3]\n" " teq %1, #0\n" " bne 1b" @@ -367,8 +367,8 @@ static inline u64 atomic64_sub_return(u64 i, atomic64_t *v) __asm__ __volatile__("@ atomic64_sub_return\n" "1: ldrexd %0, %H0, [%3]\n" -" subs %0, %0, %4\n" -" sbc %H0, %H0, %H4\n" +" subs %Q0, %Q0, %Q4\n" +" sbc %R0, %R0, %R4\n" " strexd %1, %0, %H0, [%3]\n" " teq %1, #0\n" " bne 1b" @@ -435,9 +435,9 @@ static inline u64 atomic64_dec_if_positive(atomic64_t *v) __asm__ __volatile__("@ atomic64_dec_if_positive\n" "1: ldrexd %0, %H0, [%3]\n" -" subs %0, %0, #1\n" -" sbc %H0, %H0, #0\n" -" teq %H0, #0\n" +" subs %Q0, %Q0, #1\n" +" sbc %R0, %R0, #0\n" +" teq %R0, #0\n" " bmi 2f\n" " strexd %1, %0, %H0, [%3]\n" " teq %1, #0\n" @@ -466,8 +466,8 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u) " teqeq %H0, %H5\n" " moveq %1, #0\n" " beq 2f\n" -" adds %0, %0, %6\n" -" adc %H0, %H0, %H6\n" +" adds %Q0, %Q0, %Q6\n" +" adc %R0, %R0, %R6\n" " strexd %2, %0, %H0, [%4]\n" " teq %2, #0\n" " bne 1b\n" diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index 7af5c6c3653a..b274bde24905 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -2,6 +2,8 @@ #define _ASMARM_BUG_H #include <linux/linkage.h> +#include <linux/types.h> +#include <asm/opcodes.h> #ifdef CONFIG_BUG @@ -12,10 +14,10 @@ */ #ifdef CONFIG_THUMB2_KERNEL #define BUG_INSTR_VALUE 0xde02 -#define BUG_INSTR_TYPE ".hword " +#define BUG_INSTR(__value) __inst_thumb16(__value) #else #define BUG_INSTR_VALUE 0xe7f001f2 -#define BUG_INSTR_TYPE ".word " +#define BUG_INSTR(__value) __inst_arm(__value) #endif @@ -33,7 +35,7 @@ #define __BUG(__file, __line, __value) \ do { \ - asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n" \ + asm volatile("1:\t" BUG_INSTR(__value) "\n" \ ".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \ "2:\t.asciz " #__file "\n" \ ".popsection\n" \ @@ -48,7 +50,7 @@ do { \ #define __BUG(__file, __line, __value) \ do { \ - asm volatile(BUG_INSTR_TYPE #__value); \ + asm volatile(BUG_INSTR(__value) "\n"); \ unreachable(); \ } while (0) #endif /* CONFIG_DEBUG_BUGVERBOSE */ diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h index 0cf7a6b842ff..ad774f37c47c 100644 --- a/arch/arm/include/asm/hardware/coresight.h +++ b/arch/arm/include/asm/hardware/coresight.h @@ -24,8 +24,8 @@ #define TRACER_TIMEOUT 10000 #define etm_writel(t, v, x) \ - (__raw_writel((v), (t)->etm_regs + (x))) -#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x))) + (writel_relaxed((v), (t)->etm_regs + (x))) +#define etm_readl(t, x) (readl_relaxed((t)->etm_regs + (x))) /* CoreSight Management Registers */ #define CSMR_LOCKACCESS 0xfb0 @@ -142,8 +142,8 @@ #define ETBFF_TRIGFL BIT(10) #define etb_writel(t, v, x) \ - (__raw_writel((v), (t)->etb_regs + (x))) -#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x))) + (writel_relaxed((v), (t)->etb_regs + (x))) +#define etb_readl(t, x) (readl_relaxed((t)->etb_regs + (x))) #define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0) #define etm_unlock(t) \ diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h index 48066ce9ea34..0a9d5dd93294 100644 --- a/arch/arm/include/asm/kgdb.h +++ b/arch/arm/include/asm/kgdb.h @@ -11,6 +11,7 @@ #define __ARM_KGDB_H__ #include <linux/ptrace.h> +#include <asm/opcodes.h> /* * GDB assumes that we're a user process being debugged, so @@ -41,7 +42,7 @@ static inline void arch_kgdb_breakpoint(void) { - asm(".word 0xe7ffdeff"); + asm(__inst_arm(0xe7ffdeff)); } extern void kgdb_handle_bus_error(void); diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 6f18da09668b..64fd15159b7d 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -16,7 +16,7 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID #define ASID_BITS 8 #define ASID_MASK ((~0ULL) << ASID_BITS) -#define ASID(mm) ((mm)->context.id.counter & ~ASID_MASK) +#define ASID(mm) ((unsigned int)((mm)->context.id.counter & ~ASID_MASK)) #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/debug/pl01x.S b/arch/arm/include/debug/pl01x.S index 37c6895b87e6..92ef808a2337 100644 --- a/arch/arm/include/debug/pl01x.S +++ b/arch/arm/include/debug/pl01x.S @@ -25,12 +25,14 @@ .macro waituart,rd,rx 1001: ldr \rd, [\rx, #UART01x_FR] + ARM_BE8( rev \rd, \rd ) tst \rd, #UART01x_FR_TXFF bne 1001b .endm .macro busyuart,rd,rx 1001: ldr \rd, [\rx, #UART01x_FR] + ARM_BE8( rev \rd, \rd ) tst \rd, #UART01x_FR_BUSY bne 1001b .endm diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 9b818ca3610b..a30fc9be9e9e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -17,7 +17,8 @@ CFLAGS_REMOVE_return_address.o = -pg obj-y := elf.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o \ - setup.o signal.o stacktrace.o sys_arm.o time.o traps.o + setup.o signal.o sigreturn_codes.o \ + stacktrace.o sys_arm.o time.o traps.o obj-$(CONFIG_ATAGS) += atags_parse.o obj-$(CONFIG_ATAGS_PROC) += atags_proc.o diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 9cbe70c8b0ef..55090fbb81a2 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -416,9 +416,8 @@ __und_usr: bne __und_usr_thumb sub r4, r2, #4 @ ARM instr at LR - 4 1: ldrt r0, [r4] -#ifdef CONFIG_CPU_ENDIAN_BE8 - rev r0, r0 @ little endian instruction -#endif + ARM_BE8(rev r0, r0) @ little endian instruction + @ r0 = 32-bit ARM instruction which caused the exception @ r2 = PC value for the following instruction (:= regs->ARM_pc) @ r4 = PC value for the faulting instruction diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index bc6bd9683ba4..a2dcafdf1bc8 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -393,9 +393,7 @@ ENTRY(vector_swi) #else USER( ldr r10, [lr, #-4] ) @ get SWI instruction #endif -#ifdef CONFIG_CPU_ENDIAN_BE8 - rev r10, r10 @ little endian instruction -#endif + ARM_BE8(rev r10, r10) @ little endian instruction #elif defined(CONFIG_AEABI) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 32402ba6710a..e46330f4506a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -77,6 +77,7 @@ __HEAD ENTRY(stext) + ARM_BE8(setend be ) @ ensure we are in BE8 mode THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. THUMB( bx r9 ) @ If this is a Thumb-2 kernel, @@ -352,6 +353,9 @@ ENTRY(secondary_startup) * the processor type - there is no need to check the machine type * as it has already been validated by the primary processor. */ + + ARM_BE8(setend be) @ ensure we are in BE8 mode + #ifdef CONFIG_ARM_VIRT_EXT bl __hyp_stub_install_secondary #endif @@ -602,15 +606,20 @@ __fixup_a_pv_table: b 2f 1: add r7, r3 ldrh ip, [r7, #2] +ARM_BE8(rev16 ip, ip) tst ip, #0x4000 and ip, #0x8f00 orrne ip, r6 @ mask in offset bits 31-24 orreq ip, r0 @ mask in offset bits 7-0 +ARM_BE8(rev16 ip, ip) strh ip, [r7, #2] - ldrheq ip, [r7] - biceq ip, #0x20 - orreq ip, ip, r0, lsr #16 - strheq ip, [r7] + bne 2f + ldrh ip, [r7] +ARM_BE8(rev16 ip, ip) + bic ip, #0x20 + orr ip, ip, r0, lsr #16 +ARM_BE8(rev16 ip, ip) + strh ip, [r7] 2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot bcc 1b @@ -619,11 +628,20 @@ __fixup_a_pv_table: moveq r0, #0x400000 @ set bit 22, mov to mvn instruction b 2f 1: ldr ip, [r7, r3] +#ifdef CONFIG_CPU_ENDIAN_BE8 + @ in BE8, we load data in BE, but instructions still in LE + bic ip, ip, #0xff000000 + tst ip, #0x000f0000 @ check the rotation field + orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24 + biceq ip, ip, #0x00004000 @ clear bit 22 + orreq ip, ip, r0, lsl #24 @ mask in offset bits 7-0 +#else bic ip, ip, #0x000000ff tst ip, #0xf00 @ check the rotation field orrne ip, ip, r6 @ mask in offset bits 31-24 biceq ip, ip, #0x400000 @ clear bit 22 orreq ip, ip, r0 @ mask in offset bits 7-0 +#endif str ip, [r7, r3] 2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 084dc8896986..5fdb4038f969 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -24,6 +24,7 @@ #include <asm/sections.h> #include <asm/smp_plat.h> #include <asm/unwind.h> +#include <asm/opcodes.h> #ifdef CONFIG_XIP_KERNEL /* @@ -60,6 +61,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, Elf32_Sym *sym; const char *symname; s32 offset; + u32 tmp; #ifdef CONFIG_THUMB2_KERNEL u32 upper, lower, sign, j1, j2; #endif @@ -95,7 +97,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, case R_ARM_PC24: case R_ARM_CALL: case R_ARM_JUMP24: - offset = (*(u32 *)loc & 0x00ffffff) << 2; + offset = __mem_to_opcode_arm(*(u32 *)loc); + offset = (offset & 0x00ffffff) << 2; if (offset & 0x02000000) offset -= 0x04000000; @@ -111,9 +114,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, } offset >>= 2; + offset &= 0x00ffffff; - *(u32 *)loc &= 0xff000000; - *(u32 *)loc |= offset & 0x00ffffff; + *(u32 *)loc &= __opcode_to_mem_arm(0xff000000); + *(u32 *)loc |= __opcode_to_mem_arm(offset); break; case R_ARM_V4BX: @@ -121,8 +125,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, * other bits to re-code instruction as * MOV PC,Rm. */ - *(u32 *)loc &= 0xf000000f; - *(u32 *)loc |= 0x01a0f000; + *(u32 *)loc &= __opcode_to_mem_arm(0xf000000f); + *(u32 *)loc |= __opcode_to_mem_arm(0x01a0f000); break; case R_ARM_PREL31: @@ -132,7 +136,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, case R_ARM_MOVW_ABS_NC: case R_ARM_MOVT_ABS: - offset = *(u32 *)loc; + offset = tmp = __mem_to_opcode_arm(*(u32 *)loc); offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); offset = (offset ^ 0x8000) - 0x8000; @@ -140,16 +144,18 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) offset >>= 16; - *(u32 *)loc &= 0xfff0f000; - *(u32 *)loc |= ((offset & 0xf000) << 4) | - (offset & 0x0fff); + tmp &= 0xfff0f000; + tmp |= ((offset & 0xf000) << 4) | + (offset & 0x0fff); + + *(u32 *)loc = __opcode_to_mem_arm(tmp); break; #ifdef CONFIG_THUMB2_KERNEL case R_ARM_THM_CALL: case R_ARM_THM_JUMP24: - upper = *(u16 *)loc; - lower = *(u16 *)(loc + 2); + upper = __mem_to_opcode_thumb16(*(u16 *)loc); + lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); /* * 25 bit signed address range (Thumb-2 BL and B.W @@ -198,17 +204,20 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, sign = (offset >> 24) & 1; j1 = sign ^ (~(offset >> 23) & 1); j2 = sign ^ (~(offset >> 22) & 1); - *(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) | + upper = (u16)((upper & 0xf800) | (sign << 10) | ((offset >> 12) & 0x03ff)); - *(u16 *)(loc + 2) = (u16)((lower & 0xd000) | - (j1 << 13) | (j2 << 11) | - ((offset >> 1) & 0x07ff)); + lower = (u16)((lower & 0xd000) | + (j1 << 13) | (j2 << 11) | + ((offset >> 1) & 0x07ff)); + + *(u16 *)loc = __opcode_to_mem_thumb16(upper); + *(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower); break; case R_ARM_THM_MOVW_ABS_NC: case R_ARM_THM_MOVT_ABS: - upper = *(u16 *)loc; - lower = *(u16 *)(loc + 2); + upper = __mem_to_opcode_thumb16(*(u16 *)loc); + lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); /* * MOVT/MOVW instructions encoding in Thumb-2: @@ -229,12 +238,14 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS) offset >>= 16; - *(u16 *)loc = (u16)((upper & 0xfbf0) | - ((offset & 0xf000) >> 12) | - ((offset & 0x0800) >> 1)); - *(u16 *)(loc + 2) = (u16)((lower & 0x8f00) | - ((offset & 0x0700) << 4) | - (offset & 0x00ff)); + upper = (u16)((upper & 0xfbf0) | + ((offset & 0xf000) >> 12) | + ((offset & 0x0800) >> 1)); + lower = (u16)((lower & 0x8f00) | + ((offset & 0x0700) << 4) | + (offset & 0x00ff)); + *(u16 *)loc = __opcode_to_mem_thumb16(upper); + *(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower); break; #endif diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index ab3304225272..64845fc4152a 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -21,29 +21,7 @@ #include <asm/unistd.h> #include <asm/vfp.h> -/* - * For ARM syscalls, we encode the syscall number into the instruction. - */ -#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) -#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) - -/* - * With EABI, the syscall number has to be loaded into r7. - */ -#define MOV_R7_NR_SIGRETURN (0xe3a07000 | (__NR_sigreturn - __NR_SYSCALL_BASE)) -#define MOV_R7_NR_RT_SIGRETURN (0xe3a07000 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE)) - -/* - * For Thumb syscalls, we pass the syscall number via r7. We therefore - * need two 16-bit instructions. - */ -#define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE)) -#define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE)) - -static const unsigned long sigreturn_codes[7] = { - MOV_R7_NR_SIGRETURN, SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN, - MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, -}; +extern const unsigned long sigreturn_codes[7]; static unsigned long signal_return_offset; diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S new file mode 100644 index 000000000000..3c5d0f2170fd --- /dev/null +++ b/arch/arm/kernel/sigreturn_codes.S @@ -0,0 +1,80 @@ +/* + * sigreturn_codes.S - code sinpets for sigreturn syscalls + * + * Created by: Victor Kamensky, 2013-08-13 + * Copyright: (C) 2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/unistd.h> + +/* + * For ARM syscalls, we encode the syscall number into the instruction. + * With EABI, the syscall number has to be loaded into r7. As result + * ARM syscall sequence snippet will have move and svc in .arm encoding + * + * For Thumb syscalls, we pass the syscall number via r7. We therefore + * need two 16-bit instructions in .thumb encoding + * + * Please note sigreturn_codes code are not executed in place. Instead + * they just copied by kernel into appropriate places. Code inside of + * arch/arm/kernel/signal.c is very sensitive to layout of these code + * snippets. + */ + +#if __LINUX_ARM_ARCH__ <= 4 + /* + * Note we manually set minimally required arch that supports + * required thumb opcodes for early arch versions. It is OK + * for this file to be used in combination with other + * lower arch variants, since these code snippets are only + * used as input data. + */ + .arch armv4t +#endif + + .section .rodata + .global sigreturn_codes + .type sigreturn_codes, #object + + .arm + +sigreturn_codes: + + /* ARM sigreturn syscall code snippet */ + mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) + swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) + + /* Thumb sigreturn syscall code snippet */ + .thumb + movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) + swi #0 + + /* ARM sigreturn_rt syscall code snippet */ + .arm + mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) + swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) + + /* Thumb sigreturn_rt syscall code snippet */ + .thumb + movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) + swi #0 + + /* + * Note on addtional space: setup_return in signal.c + * algorithm uses two words copy regardless whether + * it is thumb case or not, so we need additional + * word after real last entry. + */ + .arm + .space 4 + + .size sigreturn_codes, . - sigreturn_codes diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 622460201911..b907d9b790ab 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -126,6 +126,7 @@ ENDPROC(cpu_resume_after_mmu) .data .align ENTRY(cpu_resume) +ARM_BE8(setend be) @ ensure we are in BE mode mov r1, #0 ALT_SMP(mrc p15, 0, r0, c0, c0, 5) ALT_UP_B(1f) diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 5bc1a63284e3..1aafa0d785eb 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -28,7 +28,7 @@ */ unsigned int __init scu_get_core_count(void __iomem *scu_base) { - unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG); + unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG); return (ncores & 0x03) + 1; } @@ -42,19 +42,19 @@ void scu_enable(void __iomem *scu_base) #ifdef CONFIG_ARM_ERRATA_764369 /* Cortex-A9 only */ if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) { - scu_ctrl = __raw_readl(scu_base + 0x30); + scu_ctrl = readl_relaxed(scu_base + 0x30); if (!(scu_ctrl & 1)) - __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30); } #endif - scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + scu_ctrl = readl_relaxed(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) return; scu_ctrl |= 1; - __raw_writel(scu_ctrl, scu_base + SCU_CTRL); + writel_relaxed(scu_ctrl, scu_base + SCU_CTRL); /* * Ensure that the data accessed by CPU0 before the SCU was @@ -80,9 +80,9 @@ int scu_power_mode(void __iomem *scu_base, unsigned int mode) if (mode > 3 || mode == 1 || cpu > 3) return -EINVAL; - val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03; + val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03; val |= mode; - __raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu); + writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu); return 0; } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 2985c9f0905d..6591e26fc13f 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -45,7 +45,7 @@ static void twd_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_PERIODIC: ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), + writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: @@ -58,18 +58,18 @@ static void twd_set_mode(enum clock_event_mode mode, ctrl = 0; } - __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); + writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL); } static int twd_set_next_event(unsigned long evt, struct clock_event_device *unused) { - unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + unsigned long ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL); ctrl |= TWD_TIMER_CONTROL_ENABLE; - __raw_writel(evt, twd_base + TWD_TIMER_COUNTER); - __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); + writel_relaxed(evt, twd_base + TWD_TIMER_COUNTER); + writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL); return 0; } @@ -82,8 +82,8 @@ static int twd_set_next_event(unsigned long evt, */ static int twd_timer_ack(void) { - if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { - __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + if (readl_relaxed(twd_base + TWD_TIMER_INTSTAT)) { + writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT); return 1; } @@ -211,15 +211,15 @@ static void twd_calibrate_rate(void) waitjiffies += 5; /* enable, no interrupt or reload */ - __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL); + writel_relaxed(0x1, twd_base + TWD_TIMER_CONTROL); /* maximum value */ - __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); + writel_relaxed(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); while (get_jiffies_64() < waitjiffies) udelay(10); - count = __raw_readl(twd_base + TWD_TIMER_COUNTER); + count = readl_relaxed(twd_base + TWD_TIMER_COUNTER); twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); @@ -277,7 +277,7 @@ static void twd_timer_setup(void) * bother with the below. */ if (per_cpu(percpu_setup_called, cpu)) { - __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + writel_relaxed(0, twd_base + TWD_TIMER_CONTROL); clockevents_register_device(clk); enable_percpu_irq(clk->irq, 0); return; @@ -290,7 +290,7 @@ static void twd_timer_setup(void) * The following is done once per CPU the first time .setup() is * called. */ - __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + writel_relaxed(0, twd_base + TWD_TIMER_CONTROL); clk->name = "local_timer"; clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 8fcda140358d..6125f259b7b5 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -34,6 +34,7 @@ #include <asm/unwind.h> #include <asm/tls.h> #include <asm/system_misc.h> +#include <asm/opcodes.h> static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" }; @@ -341,15 +342,17 @@ void arm_notify_die(const char *str, struct pt_regs *regs, int is_valid_bugaddr(unsigned long pc) { #ifdef CONFIG_THUMB2_KERNEL - unsigned short bkpt; + u16 bkpt; + u16 insn = __opcode_to_mem_thumb16(BUG_INSTR_VALUE); #else - unsigned long bkpt; + u32 bkpt; + u32 insn = __opcode_to_mem_arm(BUG_INSTR_VALUE); #endif if (probe_kernel_address((unsigned *)pc, bkpt)) return 0; - return bkpt == BUG_INSTR_VALUE; + return bkpt == insn; } #endif @@ -402,25 +405,28 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) if (processor_mode(regs) == SVC_MODE) { #ifdef CONFIG_THUMB2_KERNEL if (thumb_mode(regs)) { - instr = ((u16 *)pc)[0]; + instr = __mem_to_opcode_thumb16(((u16 *)pc)[0]); if (is_wide_instruction(instr)) { - instr <<= 16; - instr |= ((u16 *)pc)[1]; + u16 inst2; + inst2 = __mem_to_opcode_thumb16(((u16 *)pc)[1]); + instr = __opcode_thumb32_compose(instr, inst2); } } else #endif - instr = *(u32 *) pc; + instr = __mem_to_opcode_arm(*(u32 *) pc); } else if (thumb_mode(regs)) { if (get_user(instr, (u16 __user *)pc)) goto die_sig; + instr = __mem_to_opcode_thumb16(instr); if (is_wide_instruction(instr)) { unsigned int instr2; if (get_user(instr2, (u16 __user *)pc+1)) goto die_sig; - instr <<= 16; - instr |= instr2; + instr2 = __mem_to_opcode_thumb16(instr2); + instr = __opcode_thumb32_compose(instr, instr2); } } else if (get_user(instr, (u32 __user *)pc)) { + instr = __mem_to_opcode_arm(instr); goto die_sig; } diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index 71e08baee209..c02ba4af599f 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -58,14 +58,14 @@ static const struct kvm_irq_level a15_vtimer_irq = { */ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) { - struct kvm_regs *cpu_reset; + struct kvm_regs *reset_regs; const struct kvm_irq_level *cpu_vtimer_irq; switch (vcpu->arch.target) { case KVM_ARM_TARGET_CORTEX_A15: if (vcpu->vcpu_id > a15_max_cpu_idx) return -EINVAL; - cpu_reset = &a15_regs_reset; + reset_regs = &a15_regs_reset; vcpu->arch.midr = read_cpuid_id(); cpu_vtimer_irq = &a15_vtimer_irq; break; @@ -74,7 +74,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) } /* Reset core registers */ - memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs)); + memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs)); /* Reset CP15 registers */ kvm_reset_coprocs(vcpu); diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 180b3024bec3..f607deb40f4d 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91rm9200_timer_interrupt, .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 3a4bc2e1a65e..bb392320a0dd 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91sam926x_pit_interrupt, .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 721a1a34dd1d..c40c1e2ef80f 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -16,11 +16,17 @@ #include "at91_rstc.h" .arm +/* + * at91_ramc_base is an array void* + * init at NULL if only one DDR controler is present in or DT + */ .globl at91sam9g45_restart at91sam9g45_restart: ldr r5, =at91_ramc_base @ preload constants ldr r0, [r5] + ldr r5, [r5, #4] @ ddr1 + cmp r5, #0 ldr r4, =at91_rstc_base ldr r1, [r4] @@ -30,6 +36,8 @@ at91sam9g45_restart: .balign 32 @ align to cache line + strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access + strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1 str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 str r4, [r1, #AT91_RSTC_CR] @ reset processor diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 2919eba41ff4..c0e637adf65d 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id) static struct irqaction at91x40_timer_irq = { .name = "at91_tick", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = at91x40_timer_interrupt }; diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 92b7f770615a..4078ba93776b 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; -static struct snd_platform_data dm365_evm_snd_data = { +static struct snd_platform_data dm365_evm_snd_data __maybe_unused = { .asp_chan_q = EVENTQ_3, }; diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 52b8571b2e70..ce402cd21fa0 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -15,8 +15,6 @@ #include <mach/hardware.h> -#include <linux/platform_device.h> - #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -39,6 +37,8 @@ #define UART_DM646X_SCR_TX_WATERMARK 0x08 #ifndef __ASSEMBLY__ +#include <linux/platform_device.h> + extern int davinci_serial_init(struct platform_device *); #endif diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 8e8437dea3ce..3c3bff715b47 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -4,6 +4,7 @@ config ARCH_HIGHBANK select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_OPP + select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_ERRATA_764369 diff --git a/arch/arm/mach-integrator/pci_v3.h b/arch/arm/mach-integrator/pci_v3.h index 755fd29fed4a..06a9e2e7d007 100644 --- a/arch/arm/mach-integrator/pci_v3.h +++ b/arch/arm/mach-integrator/pci_v3.h @@ -1,2 +1,9 @@ /* Simple oneliner include to the PCIv3 early init */ +#ifdef CONFIG_PCI extern int pci_v3_early_init(void); +#else +static inline int pci_v3_early_init(void) +{ + return 0; +} +#endif diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 30e1ebe3a891..c342dc4e8a45 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -1,9 +1,5 @@ if ARCH_IXP4XX -config ARCH_SUPPORTS_BIG_ENDIAN - bool - default y - menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 9eb63d724602..5e269d7263ce 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,5 +1,6 @@ config ARCH_MVEBU bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7 + select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select COMMON_CLK select GENERIC_CLOCKEVENTS diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 4c24303ec481..58adf2fd9cfc 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -140,6 +140,7 @@ int __init coherency_init(void) coherency_base = of_iomap(np, 0); coherency_cpu_base = of_iomap(np, 1); set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); + of_node_put(np); } return 0; @@ -147,9 +148,14 @@ int __init coherency_init(void) static int __init coherency_late_init(void) { - if (of_find_matching_node(NULL, of_coherency_table)) + struct device_node *np; + + np = of_find_matching_node(NULL, of_coherency_table); + if (np) { bus_register_notifier(&platform_bus_type, &mvebu_hwcc_platform_nb); + of_node_put(np); + } return 0; } diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 5476669ba905..ee7598fe75db 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -20,6 +20,8 @@ #define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0 #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4 +#include <asm/assembler.h> + .text /* * r0: Coherency fabric base register address @@ -29,6 +31,7 @@ ENTRY(ll_set_cpu_coherent) /* Create bit by cpu index */ mov r3, #(1 << 24) lsl r1, r3, r1 +ARM_BE8(rev r1, r1) /* Add CPU to SMP group - Atomic */ add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S index 8a1b0c96e9ec..3dd80df428f7 100644 --- a/arch/arm/mach-mvebu/headsmp.S +++ b/arch/arm/mach-mvebu/headsmp.S @@ -21,12 +21,16 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> + /* * Armada XP specific entry point for secondary CPUs. * We add the CPU to the coherency fabric and then jump to secondary * startup */ ENTRY(armada_xp_secondary_startup) + ARM_BE8(setend be ) @ go BE8 if entered LE + /* Get coherency fabric base physical address */ adr r0, 1f ldr r1, [r0] diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 3cc4bef6401c..27fc4f049474 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void) pr_info("Initializing Power Management Service Unit\n"); pmsu_mp_base = of_iomap(np, 0); pmsu_reset_base = of_iomap(np, 1); + of_node_put(np); } return 0; diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index f875124ff4f9..5175083cdb34 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void) BUG_ON(!match); system_controller_base = of_iomap(np, 0); mvebu_sc = (struct mvebu_system_controller *)match->data; + of_node_put(np); } return 0; diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 5bd1479d3deb..7f8f6076d360 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1108,9 +1108,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740", "fsib_mclk_in", "fsib"), /* GETHER */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", "gether_mii", "gether"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", "gether_int", "gether"), /* HDMI */ PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740", diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index ffb6f0ac7606..5930af8d434f 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -29,6 +29,7 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_device.h> +#include <linux/phy.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/sh_eth.h> @@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void) ðer_pdata, sizeof(ether_pdata)); } +/* + * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds + * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits + * 14-15. We have to set them back to 01 from the default 00 value each time + * the PHY is reset. It's also important because the PHY's LED0 signal is + * connected to SoC's ETH_LINK signal and in the PHY's default mode it will + * bounce on and off after each packet, which we apparently want to avoid. + */ +static int lager_ksz8041_fixup(struct phy_device *phydev) +{ + u16 phyctrl1 = phy_read(phydev, 0x1e); + + phyctrl1 &= ~0xc000; + phyctrl1 |= 0x4000; + return phy_write(phydev, 0x1e, phyctrl1); +} + +static void __init lager_init(void) +{ + lager_add_standard_devices(); + + phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup); +} + static const char *lager_boards_compat_dt[] __initdata = { "renesas,lager", NULL, @@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, - .init_machine = lager_add_standard_devices, + .init_machine = lager_init, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 365795447804..4fe8ebe5b2d4 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,6 +1,7 @@ config ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB + select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 7aeb5d60e484..e6eb48192912 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -131,6 +131,16 @@ static void tc2_pm_down(u64 residency) } else BUG(); + /* + * If the CPU is committed to power down, make sure + * the power controller will be in charge of waking it + * up upon IRQ, ie IRQ lines are cut from GIC CPU IF + * to the CPU by disabling the GIC CPU IF to prevent wfi + * from completing execution behind power controller back + */ + if (!skip_wfi) + gic_cpu_if_down(); + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { arch_spin_unlock(&tc2_pm_lock); @@ -231,7 +241,6 @@ static void tc2_pm_suspend(u64 residency) cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point)); - gic_cpu_if_down(); tc2_pm_down(residency); } diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index cd2c88e7a8f7..1f8fed94c2a4 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -952,3 +952,9 @@ config ARCH_HAS_BARRIERS help This option allows the use of custom mandatory barriers included via the mach/barriers.h file. + +config ARCH_SUPPORTS_BIG_ENDIAN + bool + help + This option specifies the architecture can support big endian + operation. diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 80741992a9fc..3815a8262af0 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -38,9 +38,8 @@ ENTRY(v6_early_abort) bne do_DataAbort bic r1, r1, #1 << 11 @ clear bit 11 of FSR ldr r3, [r4] @ read aborted ARM instruction -#ifdef CONFIG_CPU_ENDIAN_BE8 - rev r3, r3 -#endif + ARM_BE8(rev r3, r3) + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 6f4585b89078..924036473b16 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -25,6 +25,7 @@ #include <asm/cp15.h> #include <asm/system_info.h> #include <asm/unaligned.h> +#include <asm/opcodes.h> #include "fault.h" @@ -762,21 +763,25 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb_mode(regs)) { u16 *ptr = (u16 *)(instrptr & ~1); fault = probe_kernel_address(ptr, tinstr); + tinstr = __mem_to_opcode_thumb16(tinstr); if (!fault) { if (cpu_architecture() >= CPU_ARCH_ARMv7 && IS_T32(tinstr)) { /* Thumb-2 32-bit */ u16 tinst2 = 0; fault = probe_kernel_address(ptr + 1, tinst2); - instr = (tinstr << 16) | tinst2; + tinst2 = __mem_to_opcode_thumb16(tinst2); + instr = __opcode_thumb32_compose(tinstr, tinst2); thumb2_32b = 1; } else { isize = 2; instr = thumb2arm(tinstr); } } - } else + } else { fault = probe_kernel_address(instrptr, instr); + instr = __mem_to_opcode_arm(instr); + } if (fault) { type = TYPE_FAULT; diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 1128064fddcb..45dc29f85d56 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -220,9 +220,7 @@ __v6_setup: #endif /* CONFIG_MMU */ adr r5, v6_crval ldmia r5, {r5, r6} -#ifdef CONFIG_CPU_ENDIAN_BE8 - orr r6, r6, #1 << 25 @ big-endian page tables -#endif + ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index c63d9bdee51e..60920f62fdf5 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -367,9 +367,7 @@ __v7_setup: #endif adr r5, v7_crval ldmia r5, {r5, r6} -#ifdef CONFIG_CPU_ENDIAN_BE8 - orr r6, r6, #1 << 25 @ big-endian page tables -#endif + ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables #ifdef CONFIG_SWP_EMULATE orr r5, r5, #(1 << 10) @ set SW bit in "clear" bic r6, r6, #(1 << 10) @ clear it in "mmuset" diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index f50d223a0bd3..510d923ef6fd 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -19,6 +19,7 @@ #include <linux/if_vlan.h> #include <asm/cacheflush.h> #include <asm/hwcap.h> +#include <asm/opcodes.h> #include "bpf_jit_32.h" @@ -113,8 +114,11 @@ static u32 jit_udiv(u32 dividend, u32 divisor) static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx) { + inst |= (cond << 28); + inst = __opcode_to_mem_arm(inst); + if (ctx->target != NULL) - ctx->target[ctx->idx] = inst | (cond << 28); + ctx->target[ctx->idx] = inst; ctx->idx++; } diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S index 2677bc3762d7..40f27e52de75 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -10,6 +10,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> /* * Realview/Versatile Express specific entry point for secondary CPUs. @@ -17,6 +18,7 @@ * until we're ready for them to initialise. */ ENTRY(versatile_secondary_startup) + ARM_BE8(setend be) mrc p15, 0, r0, c0, c0, 5 bic r0, #0xff000000 adr r4, 1f |