diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-03-23 18:37:22 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-03-23 18:37:22 -0700 |
| commit | ed4643521e6af8ab8ed1e467630a85884d2696cf (patch) | |
| tree | f61d6b490f9e380068952f62b51a3f3c86562451 /Documentation | |
| parent | b4bc93bd76d4da32600795cd323c971f00a2e788 (diff) | |
| parent | bcea9aaa4373f2ee8ea3c758b76c479dffe85822 (diff) | |
| download | linux-ed4643521e6af8ab8ed1e467630a85884d2696cf.tar.bz2 | |
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
Diffstat (limited to 'Documentation')
37 files changed, 1183 insertions, 413 deletions
diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml new file mode 100644 index 000000000000..fc19b1a6f37b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/airoha.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/airoha.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha SoC based Platforms Device Tree Bindings + +maintainers: + - Felix Fietkau <nbd@nbd.name> + - John Crispin <john@phrozen.org> + +description: + Boards with an Airoha SoC shall have the following properties. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - airoha,en7523-evb + - const: airoha,en7523 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index c15c92fdf2ed..5e2017c0a051 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -13,12 +13,46 @@ properties: $nodename: const: "/" compatible: - items: - - enum: - - altr,socfpga-cyclone5 - - altr,socfpga-arria5 - - altr,socfpga-arria10 - - const: altr,socfpga + oneOf: + - description: Arria 5 boards + items: + - enum: + - altr,socfpga-arria5-socdk + - const: altr,socfpga-arria5 + - const: altr,socfpga + + - description: Arria 10 boards + items: + - enum: + - altr,socfpga-arria10-socdk + - enclustra,mercury-aa1 + - const: altr,socfpga-arria10 + - const: altr,socfpga + + - description: Cyclone 5 boards + items: + - enum: + - altr,socfpga-cyclone5-socdk + - denx,mcvevk + - ebv,socrates + - macnica,sodia + - novtech,chameleon96 + - samtec,vining + - terasic,de0-atlas + - terasic,socfpga-cyclone5-sockit + - const: altr,socfpga-cyclone5 + - const: altr,socfpga + + - description: Stratix 10 boards + items: + - enum: + - altr,socfpga-stratix10-socdk + - const: altr,socfpga-stratix10 + + - description: SoCFPGA VT + items: + - const: altr,socfpga-vt + - const: altr,socfpga additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 36081734f720..61a6cabb375b 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -108,6 +108,7 @@ properties: - amlogic,p230 - amlogic,p231 - libretech,aml-s905d-pc + - osmc,vero4k-plus - phicomm,n1 - smartlabs,sml5442tw - videostrong,gxl-kii-pro @@ -170,9 +171,14 @@ properties: - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC items: - enum: + - amediatech,x96-air + - amediatech,x96-air-gbit - bananapi,bpi-m5 + - cyx,a95xf3-air + - cyx,a95xf3-air-gbit - hardkernel,odroid-c4 - hardkernel,odroid-hc4 + - haochuangyi,h96-max - khadas,vim3l - seirobotics,sei610 - const: amlogic,sm1 @@ -183,6 +189,12 @@ properties: - amlogic,ad401 - const: amlogic,a1 + - description: Boards with the Amlogic Meson S4 S805X2 SoC + items: + - enum: + - amlogic,aq222 + - const: amlogic,s4 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index ff91df04f9f4..4e495e03264b 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -175,6 +175,15 @@ properties: - const: microchip,lan9668 - const: microchip,lan966 + - description: Kontron KSwitch D10 MMT series + items: + - enum: + - kontron,kswitch-d10-mmt-8g + - kontron,kswitch-d10-mmt-6g-2gs + - const: kontron,s1921 + - const: microchip,lan9668 + - const: microchip,lan966 + - items: - enum: - atmel,sams70j19 diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml index 5dc48241efb3..8051a75c2c79 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -51,6 +51,7 @@ properties: - raspberrypi,3-model-b-plus - raspberrypi,3-compute-module - raspberrypi,3-compute-module-lite + - raspberrypi,model-zero-2-w - const: brcm,bcm2837 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 0dcebc48ea22..3aad1b93742c 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -173,6 +173,7 @@ properties: - nvidia,tegra194-carmel - qcom,krait - qcom,kryo + - qcom,kryo250 - qcom,kryo260 - qcom,kryo280 - qcom,kryo385 diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 97f6eebad76a..08bdd30e511c 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -762,6 +762,7 @@ properties: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board + - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit @@ -769,8 +770,13 @@ properties: - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board + - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM + - toradex,verdin-imx8mm # Verdin iMX8M Mini Modules + - toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT + - toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module + - prt,prt8mm # i.MX8MM Protonic PRT8MM Board - const: fsl,imx8mm - description: Engicam i.Core MX8M Mini SoM based boards @@ -787,6 +793,24 @@ properties: - const: kontron,imx8mm-n801x-som - const: fsl,imx8mm + - description: Toradex Boards with Verdin iMX8M Mini Modules + items: + - enum: + - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia + - toradex,verdin-imx8mm-nonwifi-dev # Verdin iMX8M Mini Module on Verdin Development Board + - const: toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Module without Wi-Fi / BT + - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module + - const: fsl,imx8mm + + - description: Toradex Boards with Verdin iMX8M Mini Wi-Fi / BT Modules + items: + - enum: + - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia + - toradex,verdin-imx8mm-wifi-dev # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B. + - const: toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Module + - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module + - const: fsl,imx8mm + - description: Variscite VAR-SOM-MX8MM based boards items: - const: variscite,var-som-mx8mm-symphony diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml new file mode 100644 index 000000000000..6e043459fcd5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/intel,socfpga.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel SoCFPGA platform device tree bindings + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - description: AgileX boards + items: + - enum: + - intel,n5x-socdk + - intel,socfpga-agilex-socdk + - const: intel,socfpga-agilex + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 0ffe1acf1344..ab0593c77321 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -32,6 +32,10 @@ properties: - const: mediatek,mt6580 - items: - enum: + - prestigio,pmt5008-3g + - const: mediatek,mt6582 + - items: + - enum: - fairphone,fp1 - mundoreader,bq-aquaris5 - const: mediatek,mt6589 diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml index a316eef1b728..8892eb6bd3ef 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml @@ -23,8 +23,12 @@ properties: - description: infinity2m boards items: - enum: + - 100ask,dongshanpione # 100ask DongShanPiOne - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit - m5stack,unitv2 # M5Stack UnitV2 + - miyoo,miyoo-mini # Miyoo Mini + - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01 + - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W - const: mstar,infinity2m - description: infinity3 boards diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml new file mode 100644 index 000000000000..fcb211add7d3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Global Control Registers block in Nuvoton SoCs + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +description: + The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs + that expose misc functionality such as chip model and version information or + pinmux settings. + +properties: + compatible: + items: + - enum: + - nuvoton,wpcm450-gcr + - nuvoton,npcm750-gcr + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + gcr: syscon@800000 { + compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd"; + reg = <0x800000 0x1000>; + + mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x38 0x07>; + idle-states = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 04ff0b55bb85..129cdd246223 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -42,6 +42,7 @@ description: | sc7180 sc7280 sdm630 + sdm632 sdm660 sdm845 sdx55 @@ -172,7 +173,21 @@ properties: - const: qcom,apq8094 - items: - - const: qcom,msm8996-mtp + - enum: + - arrow,apq8096-db820c + - inforce,ifc6640 + - const: qcom,apq8096-sbc + - const: qcom,apq8096 + + - items: + - enum: + - qcom,msm8996-mtp + - sony,dora-row + - sony,kagura-row + - sony,keyaki-row + - xiaomi,gemini + - xiaomi,scorpio + - const: qcom,msm8996 - items: - enum: @@ -212,6 +227,11 @@ properties: - items: - enum: + - fairphone,fp3 + - const: qcom,sdm632 + + - items: + - enum: - xiaomi,lavender - const: qcom,sdm660 @@ -262,6 +282,7 @@ properties: - items: - enum: + - qcom,sm8450-hdk - qcom,sm8450-qrd - const: qcom,sm8450 diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 6a9350ee690b..fa435d6fda77 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -421,6 +421,15 @@ properties: - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L - const: renesas,r9a07g044 + - description: RZ/V2L (R9A07G054) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g054l1 # Single Cortex-A55 RZ/V2L + - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L + - const: renesas,r9a07g054 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 4aed16176434..eece92f83a2d 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -481,6 +481,14 @@ properties: - const: pine64,pinebook-pro - const: rockchip,rk3399 + - description: Pine64 PineNote + items: + - enum: + - pine64,pinenote-v1.1 + - pine64,pinenote-v1.2 + - const: pine64,pinenote + - const: rockchip,rk3566 + - description: Pine64 Rock64 items: - const: pine64,rock64 @@ -651,6 +659,11 @@ properties: - const: rockchip,rk3568-evb1-v10 - const: rockchip,rk3568 + - description: Rockchip RK3568 Banana Pi R2 Pro + items: + - const: rockchip,rk3568-bpi-r2pro + - const: rockchip,rk3568 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index 052cd94113d4..faea33e4f731 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -140,6 +140,8 @@ properties: items: - enum: - insignal,arndale-octa # Insignal Arndale Octa + - samsung,chagall-wifi # Samsung SM-T800 + - samsung,klimt-wifi # Samsung SM-T700 - samsung,smdk5420 # Samsung SMDK5420 eval - const: samsung,exynos5420 - const: samsung,exynos5 diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index b07720ea9611..fa0a1b84122e 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -28,6 +28,12 @@ properties: - enum: - st,stm32mp153 - st,stm32mp157 + + - description: emtrion STM32MP1 Argon based Boards + items: + - const: emtrion,stm32mp157c-emsbc-argon + - const: emtrion,stm32mp157c-emstamp-argon + - const: st,stm32mp157 - items: - enum: - st,stm32f429i-disco diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index c8a3102c0fde..086c68771d2b 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -444,6 +444,11 @@ properties: - const: haoyu,a10-marsboard - const: allwinner,sun4i-a10 + - description: HAOYU Electronics Marsboard A20 + items: + - const: haoyu,a20-marsboard + - const: allwinner,sun7i-a20 + - description: MapleBoard MP130 items: - const: mapleboard,mp130 diff --git a/Documentation/devicetree/bindings/arm/tesla.yaml b/Documentation/devicetree/bindings/arm/tesla.yaml new file mode 100644 index 000000000000..09856da657dc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tesla.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tesla.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tesla Full Self Driving(FSD) platforms device tree bindings + +maintainers: + - Alim Akhtar <alim.akhtar@samsung.com> + - linux-fsd@tesla.com + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: FSD SoC board + items: + - enum: + - tesla,fsd-evb # Tesla FSD Evaluation + - const: tesla,fsd + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index b03c10fa2e7a..61c6ab4f52e2 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -46,6 +46,12 @@ properties: - ti,j7200-evm - const: ti,j7200 + - description: K3 AM625 SoC + items: + - enum: + - ti,am625-sk + - const: ti,am625 + - description: K3 AM642 SoC items: - enum: diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt deleted file mode 100644 index 9f4ec5cb5c6b..000000000000 --- a/Documentation/devicetree/bindings/clock/intc_stratix10.txt +++ /dev/null @@ -1,20 +0,0 @@ -Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be - "intel,stratix10-clkmgr" - -- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock. - -- #clock-cells : from common clock binding, shall be set to 1. - -Example: - clkmgr: clock-controller@ffd10000 { - compatible = "intel,stratix10-clkmgr"; - reg = <0xffd10000 0x1000>; - #clock-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/intel,stratix10.yaml b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml new file mode 100644 index 000000000000..f506e3db9782 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel SoCFPGA Stratix10 platform clock controller binding + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + compatible: + const: intel,stratix10-clkmgr + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@ffd10000 { + compatible = "intel,stratix10-clkmgr"; + reg = <0xffd10000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml new file mode 100644 index 000000000000..a9ad7ab5230c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar/Sigmastar MSC313 CPU PLL + +maintainers: + - Daniel Palmer <daniel@thingy.jp> + +description: | + The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable + PLL that can be used as the clock source for the CPU(s). + +properties: + compatible: + const: mstar,msc313-cpupll + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clocks + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mstar-msc313-mpll.h> + cpupll: cpupll@206400 { + compatible = "mstar,msc313-cpupll"; + reg = <0x206400 0x200>; + #clock-cells = <1>; + clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt index b3b75c1e6285..6814dccb390c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt @@ -9,6 +9,7 @@ PROPERTIES following: "qcom,usb-hs-phy-apq8064" + "qcom,usb-hs-phy-msm8226" "qcom,usb-hs-phy-msm8916" "qcom,usb-hs-phy-msm8974" diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml new file mode 100644 index 000000000000..f73348c54748 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin + controller. + + GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller. + + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for + additional information and example. + +properties: + '#gpio-cells': + const: 2 + + gpio-controller: true + + '#interrupt-cells': + description: + For GPIO banks supporting external GPIO interrupts or external wake-up + interrupts. + const: 2 + + interrupt-controller: + description: + For GPIO banks supporting external GPIO interrupts or external wake-up + interrupts. + + interrupts: + description: + For GPIO banks supporting direct external wake-up interrupts (without + multiplexing). Number of interrupts must match number of wake-up capable + pins of this bank. + minItems: 1 + maxItems: 8 + +required: + - '#gpio-cells' + - gpio-controller + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml new file mode 100644 index 000000000000..c71939ac8b63 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin + controller. + + Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller. + + The values used for config properties should be derived from the hardware + manual and these values are programmed as-is into the pin pull up/down and + driver strength register of the pin-controller. + See also include/dt-bindings/pinctrl/samsung.h with useful constants. + + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for + additional information and example. + +properties: + samsung,pins: + description: | + List of pins to configure. For initial and sleep states, the maximum + number is one pin. In other cases there is no upper limit. + + The pins should use lowercase names matching hardware manual, e.g. for + GPA0 bank: gpa0-0, gpa0-1, gpa0-2. + $ref: /schemas/types.yaml#/definitions/string-array + + samsung,pin-function: + description: | + The pin function selection that should be applied on the pins listed in the + child node is specified using the "samsung,pin-function" property. The value + of this property that should be applied to each of the pins listed in the + "samsung,pins" property should be picked from the hardware manual of the SoC + for the specified pin group. This property is optional in the child node if + no specific function selection is desired for the pins listed in the child + node. The value of this property is used as-is to program the pin-controller + function selector register of the pin-bank. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + samsung,pin-drv: + description: Drive strength configuration. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + samsung,pin-pud: + description: Pull up/down configuration. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + samsung,pin-val: + description: Initial value of pin output buffer. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + samsung,pin-con-pdn: + description: Function in power down mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + samsung,pin-pud-pdn: + description: Pull up/down configuration in power down mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + +required: + - samsung,pins + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml new file mode 100644 index 000000000000..a822f70f5702 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin + controller. + + External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller. + For S3C24xx, S3C64xx, S5PV210 and Exynos4210 compatible wake-up interrupt + controllers, only one pin-controller device node can include external wake-up + interrupts child node (in other words, only one External wake-up interrupts + pin-controller is supported). + For newer controllers, multiple pin-controller device node can include + external wake-up interrupts child node. + + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for + additional information and example. + +properties: + compatible: + enum: + - samsung,s3c2410-wakeup-eint + - samsung,s3c2412-wakeup-eint + - samsung,s3c64xx-wakeup-eint + - samsung,s5pv210-wakeup-eint + - samsung,exynos4210-wakeup-eint + - samsung,exynos7-wakeup-eint + - samsung,exynos850-wakeup-eint + - samsung,exynosautov9-wakeup-eint + + interrupts: + description: + Interrupt used by multiplexed external wake-up interrupts. + minItems: 1 + maxItems: 6 + +required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,s3c2410-wakeup-eint + - samsung,s3c2412-wakeup-eint + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + required: + - interrupts + + - if: + properties: + compatible: + contains: + const: samsung,s3c64xx-wakeup-eint + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + required: + - interrupts + + - if: + properties: + compatible: + contains: + enum: + - samsung,s5pv210-wakeup-eint + - samsung,exynos4210-wakeup-eint + - samsung,exynos7-wakeup-eint + then: + properties: + interrupts: + minItems: 1 + maxItems: 1 + required: + - interrupts + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-wakeup-eint + - samsung,exynosautov9-wakeup-eint + then: + properties: + interrupts: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml new file mode 100644 index 000000000000..28f0851d07bb --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -0,0 +1,392 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC pin controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin + controller. + + Pin group settings (like drive strength, pull up/down) are available as + macros in include/dt-bindings/pinctrl/samsung.h. + + All the pin controller nodes should be represented in the aliases node using + the following format 'pinctrl{n}' where n is a unique number for the alias. + + The controller supports three types of interrupts:: + - External GPIO interrupts (see interrupts property in pin controller node); + + - External wake-up interrupts - multiplexed (capable of waking up the system + see interrupts property in external wake-up interrupt controller node - + samsung,pinctrl-wakeup-interrupt.yaml); + + - External wake-up interrupts - direct (capable of waking up the system, see + interrupts property in every bank of pin controller with external wake-up + interrupt controller - samsung,pinctrl-gpio-bank.yaml). + +properties: + $nodename: + pattern: "^pinctrl(@.*)?" + + compatible: + enum: + - samsung,s3c2412-pinctrl + - samsung,s3c2416-pinctrl + - samsung,s3c2440-pinctrl + - samsung,s3c2450-pinctrl + - samsung,s3c64xx-pinctrl + - samsung,s5pv210-pinctrl + - samsung,exynos3250-pinctrl + - samsung,exynos4210-pinctrl + - samsung,exynos4x12-pinctrl + - samsung,exynos5250-pinctrl + - samsung,exynos5260-pinctrl + - samsung,exynos5410-pinctrl + - samsung,exynos5420-pinctrl + - samsung,exynos5433-pinctrl + - samsung,exynos7-pinctrl + - samsung,exynos7885-pinctrl + - samsung,exynos850-pinctrl + - samsung,exynosautov9-pinctrl + + interrupts: + description: + Required for GPIO banks supporting external GPIO interrupts. + maxItems: 1 + + power-domains: + maxItems: 1 + + reg: + description: + Second base address of the pin controller if the specific registers of + the pin controller are separated into the different base address. + Only certain banks of certain pin controller might need it. + minItems: 1 + maxItems: 2 + + wakeup-interrupt-controller: + $ref: samsung,pinctrl-wakeup-interrupt.yaml + +patternProperties: + "^[a-z]+[0-9]*-gpio-bank$": + description: + Pin banks of the controller are represented by child nodes of the + controller node. Bank name is taken from name of the node. + $ref: samsung,pinctrl-gpio-bank.yaml + + "^[a-z0-9-]+-pins$": + oneOf: + - $ref: samsung,pinctrl-pins-cfg.yaml + required: + - samsung,pins + - type: object + patternProperties: + "^[a-z0-9-]+-pins$": + $ref: samsung,pinctrl-pins-cfg.yaml + + additionalProperties: false + + "^(initial|sleep)-state$": + patternProperties: + "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$": + $ref: samsung,pinctrl-pins-cfg.yaml + + properties: + samsung,pins: + description: See samsung,pinctrl-pins-cfg.yaml + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 1 + + required: + - samsung,pins + + unevaluatedProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: "pinctrl.yaml#" + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-pinctrl + then: + properties: + reg: + minItems: 1 + maxItems: 2 + else: + properties: + reg: + minItems: 1 + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/samsung.h> + + pinctrl@7f008000 { + compatible = "samsung,s3c64xx-pinctrl"; + reg = <0x7f008000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <21>; + + wakeup-interrupt-controller { + compatible = "samsung,s3c64xx-wakeup-eint"; + interrupts-extended = <&vic0 0>, + <&vic0 1>, + <&vic1 0>, + <&vic1 1>; + }; + + /* Pin bank with external GPIO or muxed external wake-up interrupts */ + gpa-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + // ... + + uart0-data-pins { + samsung,pins = "gpa-0", "gpa-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + // ... + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/samsung.h> + + pinctrl@11400000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + /* Pin bank with external GPIO or muxed external wake-up interrupts */ + gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + // ... + + uart0-data-pins { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + // ... + + sleep0: sleep-state { + gpa0-0-pin { + samsung,pins = "gpa0-0"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + gpa0-1-pin { + samsung,pins = "gpa0-1"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + // ... + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/samsung.h> + + pinctrl@11000000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* Pin bank with external GPIO or muxed external wake-up interrupts */ + gpj0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* Pin bank without external interrupts */ + gpy0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; + + /* Pin bank with external direct wake-up interrupts */ + gpx0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + // ... + + sd0-clk-pins { + samsung,pins = "gpk0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4-bus-width8-pins { + part-1-pins { + samsung,pins = "gpk0-3", "gpk0-4", + "gpk0-5", "gpk0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + part-2-pins { + samsung,pins = "gpk1-3", "gpk1-4", + "gpk1-5", "gpk1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + }; + + // ... + + otg-gp-pins { + samsung,pins = "gpx3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-val = <0>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/samsung.h> + + pinctrl@10580000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10580000 0x1a20>, <0x11090000 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&initial_alive>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* Pin bank with external direct wake-up interrupts */ + gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + // ... + + te-irq-pins { + samsung,pins = "gpf1-3"; + samsung,pin-function = <0xf>; + }; + + // .. + + initial_alive: initial-state { + gpa0-0-pin { + samsung,pins = "gpa0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; + }; + + // ... + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/samsung.h> + + pinctrl@114b0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x114b0000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_aud>; + + /* Pin bank with external GPIO or muxed external wake-up interrupts */ + gpz0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + // ... + + i2s0-bus-pins { + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", + "gpz0-4", "gpz0-5", "gpz0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; + }; + + // ... + }; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt deleted file mode 100644 index 9e70edceb21b..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ /dev/null @@ -1,383 +0,0 @@ -Samsung GPIO and Pin Mux/Config controller - -Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware -controller. It controls the input/output settings on the available pads/pins -and also provides ability to multiplex and configure the output of various -on-chip controllers onto these pads. - -Required Properties: -- compatible: should be one of the following. - - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller, - - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller, - - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller, - - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller, - - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller, - - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller, - - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller. - - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller. - - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller. - - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller. - - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller. - - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller. - - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller. - - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller. - - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller. - - "samsung,exynos7885-pinctrl": for Exynos7885 compatible pin-controller. - - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller. - - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller. - -- reg: Base address of the pin controller hardware module and length of - the address space it occupies. - - - reg: Second base address of the pin controller if the specific registers - of the pin controller are separated into the different base address. - - Eg: GPF[1-5] of Exynos5433 are separated into the two base address. - - First base address is for GPAx and GPF[1-5] external interrupt - registers. - - Second base address is for GPF[1-5] pinctrl registers. - - pinctrl_0: pinctrl@10580000 { - compatible = "samsung,exynos5433-pinctrl"; - reg = <0x10580000 0x1a20>, <0x11090000 0x100>; - - wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; - interrupts = <0 16 0>; - }; - }; - -- Pin banks as child nodes: Pin banks of the controller are represented by child - nodes of the controller node. Bank name is taken from name of the node. Each - bank node must contain following properties: - - - gpio-controller: identifies the node as a gpio controller and pin bank. - - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - - Eg: <&gpx2 6 0> - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [flags]> - - Values for gpio specifier: - - Pin number: is a value between 0 to 7. - - Flags: 0 - Active High - 1 - Active Low - -- Pin mux/config groups as child nodes: The pin mux (selecting pin function - mode) and pin config (pull up/down, driver strength) settings are represented - as child nodes of the pin-controller node. There should be at least one - child node and there is no limit on the count of these child nodes. It is - also possible for a child node to consist of several further child nodes - to allow grouping multiple pinctrl groups into one. The format of second - level child nodes is exactly the same as for first level ones and is - described below. - - The child node should contain a list of pin(s) on which a particular pin - function selection or pin configuration (or both) have to applied. This - list of pins is specified using the property name "samsung,pins". There - should be at least one pin specified for this property and there is no upper - limit on the count of pins that can be specified. The pins are specified - using pin names which are derived from the hardware manual of the SoC. As - an example, the pins in GPA0 bank of the pin controller can be represented - as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case. - The format of the pin names should be (as per the hardware manual) - "[pin bank name]-[pin number within the bank]". - - The pin function selection that should be applied on the pins listed in the - child node is specified using the "samsung,pin-function" property. The value - of this property that should be applied to each of the pins listed in the - "samsung,pins" property should be picked from the hardware manual of the SoC - for the specified pin group. This property is optional in the child node if - no specific function selection is desired for the pins listed in the child - node. The value of this property is used as-is to program the pin-controller - function selector register of the pin-bank. - - The child node can also optionally specify one or more of the pin - configuration that should be applied on all the pins listed in the - "samsung,pins" property of the child node. The following pin configuration - properties are supported. - - - samsung,pin-val: Initial value of pin output buffer. - - samsung,pin-pud: Pull up/down configuration. - - samsung,pin-drv: Drive strength configuration. - - samsung,pin-pud-pdn: Pull up/down configuration in power down mode. - - samsung,pin-drv-pdn: Drive strength configuration in power down mode. - - The values specified by these config properties should be derived from the - hardware manual and these values are programmed as-is into the pin - pull up/down and driver strength register of the pin-controller. - - Note: A child should include at least a pin function selection property or - pin configuration property (one or more) or both. - - The client nodes that require a particular pin function selection and/or - pin configuration should use the bindings listed in the "pinctrl-bindings.txt" - file. - -External GPIO and Wakeup Interrupts: - -The controller supports two types of external interrupts over gpio. The first -is the external gpio interrupt and second is the external wakeup interrupts. -The difference between the two is that the external wakeup interrupts can be -used as system wakeup events. - -A. External GPIO Interrupts: For supporting external gpio interrupts, the - following properties should be specified in the pin-controller device node. - - - interrupts: interrupt specifier for the controller. The format and value of - the interrupt specifier depends on the interrupt parent for the controller. - - In addition, following properties must be present in node of every bank - of pins supporting GPIO interrupts: - - - interrupt-controller: identifies the controller node as interrupt-parent. - - #interrupt-cells: the value of this property should be 2. - - First Cell: represents the external gpio interrupt number local to the - external gpio interrupt space of the controller. - - Second Cell: flags to identify the type of the interrupt - - 1 = rising edge triggered - - 2 = falling edge triggered - - 3 = rising and falling edge triggered - - 4 = high level triggered - - 8 = low level triggered - -B. External Wakeup Interrupts: For supporting external wakeup interrupts, a - child node representing the external wakeup interrupt controller should be - included in the pin-controller device node. - - Only one pin-controller device node can include external wakeup interrupts - child node (in other words, only one External Wakeup Interrupts - pin-controller is supported). - - This child node should include following properties: - - - compatible: identifies the type of the external wakeup interrupt controller - The possible values are: - - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller - found on Samsung S3C24xx SoCs except S3C2412 and S3C2413, - - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller - found on Samsung S3C2412 and S3C2413 SoCs, - - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller - found on Samsung S3C64xx SoCs, - - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller - found on Samsung S5Pv210 SoCs, - - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller - found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs. - - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller - found on Samsung Exynos7 SoC. - - interrupts: interrupt used by multiplexed wakeup interrupts. - - In addition, following properties must be present in node of every bank - of pins supporting wake-up interrupts: - - - interrupt-controller: identifies the node as interrupt-parent. - - #interrupt-cells: the value of this property should be 2 - - First Cell: represents the external wakeup interrupt number local to - the external wakeup interrupt space of the controller. - - Second Cell: flags to identify the type of the interrupt - - 1 = rising edge triggered - - 2 = falling edge triggered - - 3 = rising and falling edge triggered - - 4 = high level triggered - - 8 = low level triggered - - Node of every bank of pins supporting direct wake-up interrupts (without - multiplexing) must contain following properties: - - - interrupts: interrupts of the interrupt parent which are used for external - wakeup interrupts from pins of the bank, must contain interrupts for all - pins of the bank. - -Aliases: - -All the pin controller nodes should be represented in the aliases node using -the following format 'pinctrl{n}' where n is a unique number for the alias. - -Aliases for controllers compatible with "samsung,exynos7-pinctrl": -- pinctrl0: pin controller of ALIVE block, -- pinctrl1: pin controller of BUS0 block, -- pinctrl2: pin controller of NFC block, -- pinctrl3: pin controller of TOUCH block, -- pinctrl4: pin controller of FF block, -- pinctrl5: pin controller of ESE block, -- pinctrl6: pin controller of FSYS0 block, -- pinctrl7: pin controller of FSYS1 block, -- pinctrl8: pin controller of BUS1 block, -- pinctrl9: pin controller of AUDIO block, - -Example: A pin-controller node with pin banks: - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; - - /* ... */ - - /* Pin bank without external interrupts */ - gpy0: gpy0 { - gpio-controller; - #gpio-cells = <2>; - }; - - /* ... */ - - /* Pin bank with external GPIO or muxed wake-up interrupts */ - gpj0: gpj0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - /* ... */ - - /* Pin bank with external direct wake-up interrupts */ - gpx0: gpx0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; - #interrupt-cells = <2>; - }; - - /* ... */ - }; - -Example 1: A pin-controller node with pin groups. - - #include <dt-bindings/pinctrl/samsung.h> - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; - - /* ... */ - - uart0_data: uart0-data { - samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart0_fctl: uart0-fctl { - samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_data: uart1-data { - samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_fctl: uart1-fctl { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c2_bus: i2c2-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - sd4_bus8: sd4-bus-width8 { - part-1 { - samsung,pins = "gpk0-3", "gpk0-4", - "gpk0-5", "gpk0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - part-2 { - samsung,pins = "gpk1-3", "gpk1-4", - "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - }; - }; - -Example 2: A pin-controller node with external wakeup interrupt controller node. - - pinctrl_1: pinctrl@11000000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <0 46 0> - - /* ... */ - - wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 32 0>; - }; - }; - -Example 3: A uart client node that supports 'default' and 'flow-control' states. - - uart@13800000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13800000 0x100>; - interrupts = <0 52 0>; - pinctrl-names = "default", "flow-control; - pinctrl-0 = <&uart0_data>; - pinctrl-1 = <&uart0_data>, <&uart0_fctl>; - }; - -Example 4: Set up the default pin state for uart controller. - - static int s3c24xx_serial_probe(struct platform_device *pdev) { - struct pinctrl *pinctrl; - - /* ... */ - - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - } - -Example 5: A display port client node that supports 'default' pinctrl state - and gpio binding. - - display-port-controller { - /* ... */ - - samsung,hpd-gpio = <&gpx2 6 0>; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - }; - -Example 6: Request the gpio for display port controller - - static int exynos_dp_probe(struct platform_device *pdev) - { - int hpd_gpio, ret; - struct device *dev = &pdev->dev; - struct device_node *dp_node = dev->of_node; - - /* ... */ - - hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0); - - /* ... */ - - ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN, - "hpd_gpio"); - /* ... */ - } diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml index 01bdda167eef..747622bdc57b 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -28,6 +28,7 @@ properties: - fsl,imx8mn-gpc - fsl,imx8mq-gpc - fsl,imx8mm-gpc + - fsl,imx8mp-gpc reg: maxItems: 1 @@ -57,6 +58,7 @@ properties: include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc + include/dt-bindings/power/imx8mp-power.h for fsl,imx8mp-gpc maxItems: 1 clocks: diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml index 84ddc772b003..bb433e75a0ee 100644 --- a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml +++ b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml @@ -4,14 +4,14 @@ $id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Renesas RZ/G2L System Controller (SYSC) +title: Renesas RZ/{G2L,V2L} System Controller (SYSC) maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> description: - The RZ/G2L System Controller (SYSC) performs system control of the LSI and - supports following functions, + The RZ/{G2L,V2L} System Controller (SYSC) performs system control of the LSI + and supports following functions, - External terminal state capture function - 34-bit address space access function - Low power consumption control @@ -21,6 +21,7 @@ properties: compatible: enum: - renesas,r9a07g044-sysc # RZ/G2{L,LC} + - renesas,r9a07g054-sysc # RZ/V2L reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml new file mode 100644 index 000000000000..c1e29d94f40e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP HSIO blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the high-speed IO + (USB an PCIe) peripherals located in the HSIO domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mp-hsio-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 6 + maxItems: 6 + + power-domain-names: + items: + - const: bus + - const: usb + - const: usb-phy1 + - const: usb-phy2 + - const: pcie + - const: pcie-phy + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: usb + - const: pcie + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + hsio_blk_ctrl: blk-ctrl@32f10000 { + compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; + reg = <0x32f10000 0x24>; + clocks = <&clk IMX8MP_CLK_USB_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "usb", "pcie"; + power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>, + <&pgc_usb1_phy>, <&pgc_usb2_phy>, + <&pgc_hsiomix>, <&pgc_pcie_phy>; + power-domain-names = "bus", "usb", "usb-phy1", + "usb-phy2", "pcie", "pcie-phy"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml new file mode 100644 index 000000000000..7263ebedf09f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MQ VPU blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MQ VPU blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the VPU peripherals + located in the VPU domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mq-vpu-blk-ctrl + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 3 + maxItems: 3 + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: g1 + - const: g2 + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> + + vpu_blk_ctrl: blk-ctrl@38320000 { + compatible = "fsl,imx8mq-vpu-blk-ctrl"; + reg = <0x38320000 0x100>; + power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>; + power-domain-names = "bus", "g1", "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + clock-names = "g1", "g2"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index dfebf425ca49..b2ba7bed89b2 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -15,6 +15,7 @@ properties: - items: - enum: - rockchip,rk3288-sgrf + - rockchip,rk3568-usb2phy-grf - rockchip,rv1108-usbgrf - const: syscon - items: diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index e5c57d6e0186..fbd76a8e023b 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -12,6 +12,7 @@ Required properties: For those SoCs that use GPT * "mediatek,mt2701-timer" for MT2701 compatible timers (GPT) * "mediatek,mt6580-timer" for MT6580 compatible timers (GPT) + * "mediatek,mt6582-timer" for MT6582 compatible timers (GPT) * "mediatek,mt6589-timer" for MT6589 compatible timers (GPT) * "mediatek,mt7623-timer" for MT7623 compatible timers (GPT) * "mediatek,mt8127-timer" for MT8127 compatible timers (GPT) diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 481aaa09f3f2..4cebce682d16 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -41,6 +41,7 @@ properties: - amlogic,meson8b-usb - amlogic,meson-gxbb-usb - amlogic,meson-g12a-usb + - intel,socfpga-agilex-hsotg - const: snps,dwc2 - const: amcc,dwc-otg - const: apm,apm82181-dwc-otg @@ -68,6 +69,13 @@ properties: items: - const: otg + disable-over-current: + type: boolean + description: whether to disable detection of over-current condition. + + iommus: + maxItems: 1 + resets: items: - description: common reset diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 047a83a089ce..baed2b007d0e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -23,6 +23,8 @@ patternProperties: "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true # Keep list in alphabetical order. + "^100ask,.*": + description: Baiwen.com (100ask). "^70mai,.*": description: 70mai Co., Ltd. "^8dev,.*": @@ -61,6 +63,8 @@ patternProperties: description: Aeroflex Gaisler AB "^aesop,.*": description: AESOP Embedded Forum + "^airoha,.*": + description: Airoha "^al,.*": description: Annapurna Labs "^alcatel,.*": @@ -277,12 +281,16 @@ patternProperties: description: Hangzhou C-SKY Microsystems Co., Ltd "^csq,.*": description: Shenzen Chuangsiqi Technology Co.,Ltd. + "^ctera,.*": + description: CTERA Networks Intl. "^cubietech,.*": description: Cubietech, Ltd. "^cui,.*": description: CUI Devices "^cypress,.*": description: Cypress Semiconductor Corporation + "^cyx,.*": + description: Shenzhen CYX Industrial Co., Ltd "^cznic,.*": description: CZ.NIC, z.s.p.o. "^dallas,.*": @@ -489,6 +497,8 @@ patternProperties: deprecated: true "^hannstar,.*": description: HannStar Display Corporation + "^haochuangyi,.*": + description: Shenzhen Haochuangyi Technology Co.,Ltd "^haoyu,.*": description: Haoyu Microelectronic Co. Ltd. "^hardkernel,.*": @@ -769,6 +779,8 @@ patternProperties: description: MiraMEMS Sensing Technology Co., Ltd. "^mitsubishi,.*": description: Mitsubishi Electric Corporation + "^miyoo,.*": + description: Miyoo "^mntre,.*": description: MNT Research GmbH "^modtronix,.*": @@ -892,6 +904,8 @@ patternProperties: description: Ortus Technology Co., Ltd. "^osddisplays,.*": description: OSD Displays + "^osmc,.*": + description: Sam Nazarko Trading Ltd. (Open Source Media Centre) "^ouya,.*": description: Ouya Inc. "^overkiz,.*": @@ -1205,6 +1219,8 @@ patternProperties: description: Shenzhen Techstar Electronics Co., Ltd. "^terasic,.*": description: Terasic Inc. + "^tesla,.*": + description: Tesla, Inc. "^tfc,.*": description: Three Five Corp "^thead,.*": @@ -1350,6 +1366,8 @@ patternProperties: description: WinLink Co., Ltd "^winstar,.*": description: Winstar Display Corp. + "^wirelesstag,.*": + description: Wireless Tag (qiming yunduan) "^wits,.*": description: Shenzhen Merrii Technology Co., Ltd. (WITS) "^wlf,.*": diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 0114871f887a..a97418c74f6b 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -8,6 +8,7 @@ Required properties: - compatible should contain: "mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701 "mediatek,mt2712-wdt": for MT2712 + "mediatek,mt6582-wdt", "mediatek,mt6589-wdt": for MT6582 "mediatek,mt6589-wdt": for MT6589 "mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797 "mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622 |