Merge tag 'linux-watchdog-5.14-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - Add Mstar MSC313e WDT driver

 - Add support for sama7g5-wdt

 - Add compatible for SC7280 SoC

 - Add compatible for Mediatek MT8195

 - sbsa: Support architecture version 1

 - Removal of the MV64x60 watchdog driver

 - Extra PCI IDs for hpwdt

 - Add hrtimer-based pretimeout feature

 - Add {min,max}_timeout sysfs nodes

 - keembay timeout and pre-timeout handling

 - Several fixes, cleanups and improvements

* tag 'linux-watchdog-5.14-rc1' of git://www.linux-watchdog.org/linux-watchdog: (56 commits)
  watchdog: iTCO_wdt: use dev_err() instead of pr_err()
  watchdog: Add Mstar MSC313e WDT driver
  dt-bindings: watchdog: Add Mstar MSC313e WDT devicetree bindings documentation
  watchdog: iTCO_wdt: Account for rebooting on second timeout
  dt-bindings: watchdog: Convert arm,sbsa-gwdt to DT schema
  dt-bindings: watchdog: sama5d4-wdt: add compatible for sama7g5-wdt
  watchdog: sama5d4_wdt: add support for sama7g5-wdt
  dt-bindings: watchdog: sama5d4-wdt: convert to yaml
  watchdog: ziirave_wdt: Remove VERSION_FMT defines and add sysfs newlines
  dt-bindings: watchdog: Add compatible for Mediatek MT8195
  dt-bindings: watchdog: dw-wdt: add description for rk3568
  watchdog: imx_sc_wdt: fix pretimeout
  watchdog: diag288_wdt: Remove redundant assignment
  watchdog: Add hrtimer-based pretimeout feature
  dt-bindings: watchdog: Add compatible for SC7280 SoC
  watchdog: qcom: Move suspend/resume to suspend_late/resume_early
  watchdog: Fix a typo in the file orion_wdt.c
  watchdog: jz4740: Fix return value check in jz4740_wdt_probe()
  watchdog: Remove MV64x60 watchdog driver
  doc: mtk-wdt: support pre-timeout when the bark irq is available
  ...

6 files changed, 122 insertions, 34 deletions

diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
new file mode 100644
index 000000000000..9856cd76c28d
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d4-wdt
+      - microchip,sam9x60-wdt
+      - microchip,sama7g5-wdt
+
+  reg:
+    maxItems: 1
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: should be hardware or software.
+    oneOf:
+      - description:
+          Enable watchdog fault reset. A watchdog fault triggers
+          watchdog reset.
+        const: hardware
+      - description:
+          Enable watchdog fault interrupt. A watchdog fault asserts
+          watchdog interrupt.
+        const: software
+    default: hardware
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stop working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in debug state.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fc068640 {
+      compatible = "atmel,sama5d4-wdt";
+      reg = <0xfc068640 0x10>;
+      interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+      timeout-sec = <10>;
+      atmel,watchdog-type = "hardware";
+      atmel,dbg-halt;
+      atmel,idle-halt;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
deleted file mode 100644
index 44727fcc2729..000000000000
--- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"
-- reg: base physical address and length of memory mapped region.
-
-Optional properties:
-- timeout-sec: watchdog timeout value (in seconds).
-- interrupts: interrupt number to the CPU.
-- atmel,watchdog-type: should be "hardware" or "software".
-	"hardware": enable watchdog fault reset. A watchdog fault triggers
-		    watchdog reset.
-	"software": enable watchdog fault interrupt. A watchdog fault asserts
-		    watchdog interrupt.
-- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
-		   in idle state.
-	CAUTION: This property should be used with care, it actually makes the
-	watchdog not counting when the CPU is in idle state, therefore the
-	watchdog reset time depends on mean CPU usage and will not reset at all
-	if the CPU stop working while it is in idle state, which is probably
-	not what you want.
-- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
-		  in debug state.
-
-Example:
-	watchdog@fc068640 {
-		compatible = "atmel,sama5d4-wdt";
-		reg = <0xfc068640 0x10>;
-		interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
-		timeout-sec = <10>;
-		atmel,watchdog-type = "hardware";
-		atmel,dbg-halt;
-		atmel,idle-halt;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
new file mode 100644
index 000000000000..e3e8b86dbf63
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mstar,msc313e-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Watchdog Device Tree Bindings
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313e-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@6000 {
+        compatible = "mstar,msc313e-wdt";
+        reg = <0x6000 0x1f>;
+        clocks = <&xtal_div2>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index e36ba60de829..416d716403f6 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -1,5 +1,8 @@
 Mediatek SoCs Watchdog timer
 
+The watchdog supports a pre-timeout interrupt that fires timeout-sec/2
+before the expiry.
+
 Required properties:
 
 - compatible should contain:
@@ -13,10 +16,12 @@ Required properties:
 	"mediatek,mt8183-wdt": for MT8183
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 	"mediatek,mt8192-wdt": for MT8192
+	"mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
 
 - reg : Specifies base physical address and size of the registers.
 
 Optional properties:
+- interrupts: Watchdog pre-timeout (bark) interrupt.
 - timeout-sec: contains the watchdog timeout in seconds.
 - #reset-cells: Should be 1.
 
@@ -26,6 +31,7 @@ watchdog: watchdog@10007000 {
 	compatible = "mediatek,mt8183-wdt",
 		     "mediatek,mt6589-wdt";
 	reg = <0 0x10007000 0 0x100>;
+	interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
 	timeout-sec = <10>;
 	#reset-cells = <1>;
 };
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index b8e4118945a0..ba60bdf1fecc 100644
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -17,6 +17,7 @@ properties:
     enum:
       - qcom,apss-wdt-qcs404
       - qcom,apss-wdt-sc7180
+      - qcom,apss-wdt-sc7280
       - qcom,apss-wdt-sdm845
       - qcom,apss-wdt-sdx55
       - qcom,apss-wdt-sm8150
diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
index b58596b1831d..6461eb4f4a27 100644
--- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -27,6 +27,7 @@ properties:
               - rockchip,rk3328-wdt
               - rockchip,rk3368-wdt
               - rockchip,rk3399-wdt
+              - rockchip,rk3568-wdt
               - rockchip,rv1108-wdt
           - const: snps,dw-wdt