summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-05-25 14:56:06 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2022-05-25 14:56:06 -0700
commit86c87bea6b42100c67418af690919c44de6ede6e (patch)
tree8adbe2fd9d12c30903bc503883241b6942c3191d /Documentation
parentd223575e50f8da0de358c0098defd560069ecf66 (diff)
parentd036d915b61f23b9e80d93f8a606eebf3bfab73f (diff)
downloadlinux-86c87bea6b42100c67418af690919c44de6ede6e.tar.bz2
Merge tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring: "Bindings: - Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm, qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen, Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq, fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers - Convert various Arm Ltd peripheral IP bindings to schemas - New bindings for Menlo board CPLD, DH electronics board CPLD, Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751 GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and Microchip/SMSC LAN95xx USB Ethernet controllers - Add vendor prefix for Enclustra - Add various compatible string additions - Various example fixes and cleanups - Remove unused hisilicon,hi6220-reset binding - Treewide fix properties missing type definition - Drop some empty and unreferenced .txt bindings - Documentation improvements for writing schemas DT driver core: - Drop static IRQ resources for DT platform devices as IRQ setup is dynamic and drivers have all been converted to use platform_get_irq() and friends - Rework memory allocations and frees for overlays - Continue overlay notifier callbacks on successful calls and add unittests - Handle 'interrupts-extended' in early DT IRQ setup - Fix of_property_read_string() errors to match documentation - Ignore disabled nodes in FDT API calls" * tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits) of/irq: fix typo in comment dt-bindings: Fix properties without any type Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example" dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings dt-bindings: timer: samsung,exynos4210-mct: define strict clock order dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems dt-bindings: timer: cdns,ttc: drop unneeded minItems dt-bindings: mailbox: zynqmp_ipi: convert to yaml dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers dt-bindings: net: add schema for ASIX USB Ethernet controllers of/fdt: Ignore disabled memory nodes dt-bindings: arm: fix typos in compatible dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360 dt-bindings: display: convert Arm Komeda to DT schema dt-bindings: display: convert Arm Mali-DP to DT schema dt-bindings: display: convert Arm HDLCD to DT schema dt-bindings: display: convert PL110/PL111 to DT schema dt-bindings: arm: convert vexpress-config to DT schema dt-bindings: arm: convert vexpress-sysregs to DT schema ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml5
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt35
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt42
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml81
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt35
-rw-r--r--Documentation/devicetree/bindings/arm/sp810.txt46
-rw-r--r--Documentation/devicetree/bindings/arm/sp810.yaml80
-rw-r--r--Documentation/devicetree/bindings/arm/spe-pmu.txt20
-rw-r--r--Documentation/devicetree/bindings/arm/vexpress-config.yaml285
-rw-r--r--Documentation/devicetree/bindings/arm/vexpress-sysreg.txt103
-rw-r--r--Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml90
-rw-r--r--Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml61
-rw-r--r--Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml61
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml1
-rw-r--r--Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/arm,hdlcd.txt79
-rw-r--r--Documentation/devicetree/bindings/display/arm,hdlcd.yaml89
-rw-r--r--Documentation/devicetree/bindings/display/arm,komeda.txt78
-rw-r--r--Documentation/devicetree/bindings/display/arm,komeda.yaml130
-rw-r--r--Documentation/devicetree/bindings/display/arm,malidp.txt68
-rw-r--r--Documentation/devicetree/bindings/display/arm,malidp.yaml124
-rw-r--r--Documentation/devicetree/bindings/display/arm,pl11x.txt110
-rw-r--r--Documentation/devicetree/bindings/display/arm,pl11x.yaml183
-rw-r--r--Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/bridge/ps8640.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-timing.yaml5
-rw-r--r--Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml1
-rw-r--r--Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml1
-rw-r--r--Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml1
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.txt1
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.yaml4
-rw-r--r--Documentation/devicetree/bindings/example-schema.yaml14
-rw-r--r--Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml69
-rw-r--r--Documentation/devicetree/bindings/gnss/mediatek.txt35
-rw-r--r--Documentation/devicetree/bindings/gnss/mediatek.yaml59
-rw-r--r--Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml1
-rw-r--r--Documentation/devicetree/bindings/gpu/samsung-rotator.yaml1
-rw-r--r--Documentation/devicetree/bindings/hwmon/adt7475.yaml1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-gate.yaml1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt53
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml118
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml1
-rw-r--r--Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml100
-rw-r--r--Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt40
-rw-r--r--Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml89
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,riic.yaml2
-rw-r--r--Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml2
-rw-r--r--Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml1
-rw-r--r--Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt27
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml7
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt53
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml118
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt5
-rw-r--r--Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml16
-rw-r--r--Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml1
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml2
-rw-r--r--Documentation/devicetree/bindings/leds/leds-mt6360.yaml2
-rw-r--r--Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml1
-rw-r--r--Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml1
-rw-r--r--Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt127
-rw-r--r--Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml140
-rw-r--r--Documentation/devicetree/bindings/media/i2c/adv7604.yaml3
-rw-r--r--Documentation/devicetree/bindings/media/microchip,xisc.yaml1
-rw-r--r--Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml256
-rw-r--r--Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/common.txt1
-rw-r--r--Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt2
-rw-r--r--Documentation/devicetree/bindings/mux/reg-mux.yaml8
-rw-r--r--Documentation/devicetree/bindings/net/asix,ax88178.yaml68
-rw-r--r--Documentation/devicetree/bindings/net/cdns,macb.yaml1
-rw-r--r--Documentation/devicetree/bindings/net/ingenic,mac.yaml1
-rw-r--r--Documentation/devicetree/bindings/net/microchip,lan95xx.yaml63
-rw-r--r--Documentation/devicetree/bindings/net/qcom,ipa.yaml7
-rw-r--r--Documentation/devicetree/bindings/net/smsc,lan91c111.yaml61
-rw-r--r--Documentation/devicetree/bindings/net/smsc-lan91c111.txt17
-rw-r--r--Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml1
-rw-r--r--Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml1
-rw-r--r--Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml2
-rw-r--r--Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml4
-rw-r--r--Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml6
-rw-r--r--Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml2
-rw-r--r--Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml96
-rw-r--r--Documentation/devicetree/bindings/pci/uniphier-pcie.txt82
-rw-r--r--Documentation/devicetree/bindings/perf/spe-pmu.yaml40
-rw-r--r--Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml2
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml15
-rw-r--r--Documentation/devicetree/bindings/power/supply/battery.yaml7
-rw-r--r--Documentation/devicetree/bindings/power/supply/charger-manager.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/supply/power-supply.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml2
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt2
-rw-r--r--Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml1
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml1
-rw-r--r--Documentation/devicetree/bindings/reserved-memory/ramoops.yaml1
-rw-r--r--Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt37
-rw-r--r--Documentation/devicetree/bindings/reset/microchip,rst.yaml1
-rw-r--r--Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml1
-rw-r--r--Documentation/devicetree/bindings/rng/st,stm32-rng.yaml1
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/8250.yaml1
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt81
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml112
-rw-r--r--Documentation/devicetree/bindings/serial/sprd-uart.yaml2
-rw-r--r--Documentation/devicetree/bindings/serio/arm,pl050.yaml67
-rw-r--r--Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml68
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml58
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml3
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt87
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml132
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt110
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml145
-rw-r--r--Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml175
-rw-r--r--Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt57
-rw-r--r--Documentation/devicetree/bindings/sound/adi,adau1372.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/arm,pl041.yaml62
-rw-r--r--Documentation/devicetree/bindings/sound/audio-graph-card2.yaml3
-rw-r--r--Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml3
-rw-r--r--Documentation/devicetree/bindings/sound/maxim,max98520.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml2
-rw-r--r--Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml2
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/samsung,odroid.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/tas2562.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/tas2770.yaml1
-rw-r--r--Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml1
-rw-r--r--Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml1
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml3
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qup.txt103
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml81
-rw-r--r--Documentation/devicetree/bindings/spi/renesas,hspi.yaml1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-davinci.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-pl022.yaml2
-rw-r--r--Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt65
-rw-r--r--Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml117
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-tsens.yaml1
-rw-r--r--Documentation/devicetree/bindings/timer/cdns,ttc.yaml1
-rw-r--r--Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt20
-rw-r--r--Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml47
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,ostm.yaml2
-rw-r--r--Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml5
-rw-r--r--Documentation/devicetree/bindings/timer/ti,timer-dm.yaml152
-rw-r--r--Documentation/devicetree/bindings/timer/ti,timer.txt44
-rw-r--r--Documentation/devicetree/bindings/trivial-devices.yaml4
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.yaml4
-rw-r--r--Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml5
-rw-r--r--Documentation/devicetree/bindings/usb/smsc,usb3503.yaml3
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
-rw-r--r--Documentation/devicetree/bindings/writing-bindings.rst25
-rw-r--r--Documentation/devicetree/bindings/writing-schema.rst8
-rw-r--r--Documentation/devicetree/overlay-notes.rst30
174 files changed, 3871 insertions, 1806 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
index 8c7a4908a849..a8866c6e9d46 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
@@ -30,7 +30,7 @@ Example:
cpus {
cpu@0 {
- compatible = "arm,cotex-a9";
+ compatible = "arm,cortex-a9";
reg = <0>;
...
enable-method = "brcm,bcm63138";
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
deleted file mode 100644
index 10a91cc8b997..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale DCFG
-
-DCFG is the device configuration unit, that provides general purpose
-configuration and status for the device. Such as setting the secondary
-core start address and release the secondary core from holdoff and startup.
-
-Required properties:
- - compatible: Should contain a chip-specific compatible string,
- Chip-specific strings are of the form "fsl,<chip>-dcfg",
- The following <chip>s are known to be supported:
- ls1012a, ls1021a, ls1043a, ls1046a, ls2080a, lx2160a
-
- - reg : should contain base address and length of DCFG memory-mapped registers
-
-Example:
- dcfg: dcfg@1ee0000 {
- compatible = "fsl,ls1021a-dcfg";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
- };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
deleted file mode 100644
index 0ab67b0b216d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale SCFG
-
-SCFG is the supplemental configuration unit, that provides SoC specific
-configuration and status registers for the chip. Such as getting PEX port
-status.
-
-Required properties:
- - compatible: Should contain a chip-specific compatible string,
- Chip-specific strings are of the form "fsl,<chip>-scfg",
- The following <chip>s are known to be supported:
- ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
- - reg: should contain base address and length of SCFG memory-mapped registers
-
-Example:
- scfg: scfg@1570000 {
- compatible = "fsl,ls1021a-scfg";
- reg = <0x0 0x1570000 0x0 0x10000>;
- };
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
index 7378159e61df..483caf0ce25b 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
@@ -17,14 +17,15 @@ properties:
- const: hisilicon,hip04-bootwrapper
boot-method:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
description: |
Address and size of boot method.
[0]: bootwrapper physical address
[1]: bootwrapper size
[2]: relocation physical address
[3]: relocation size
- minItems: 1
- maxItems: 2
+ minItems: 2
+ maxItems: 4
required:
- compatible
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
deleted file mode 100644
index 3fa755866528..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek apmixedsys controller
-==============================
-
-The Mediatek apmixedsys controller provides the PLLs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2701-apmixedsys"
- - "mediatek,mt2712-apmixedsys", "syscon"
- - "mediatek,mt6765-apmixedsys", "syscon"
- - "mediatek,mt6779-apmixedsys", "syscon"
- - "mediatek,mt6797-apmixedsys"
- - "mediatek,mt7622-apmixedsys"
- - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
- - "mediatek,mt7629-apmixedsys"
- - "mediatek,mt7986-apmixedsys"
- - "mediatek,mt8135-apmixedsys"
- - "mediatek,mt8167-apmixedsys", "syscon"
- - "mediatek,mt8173-apmixedsys"
- - "mediatek,mt8183-apmixedsys", "syscon"
- - "mediatek,mt8516-apmixedsys"
-- #clock-cells: Must be 1
-
-The apmixedsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-apmixedsys: clock-controller@10209000 {
- compatible = "mediatek,mt8173-apmixedsys";
- reg = <0 0x10209000 0 0x1000>;
- #clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
deleted file mode 100644
index f66bd720571d..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Mediatek infracfg controller
-============================
-
-The Mediatek infracfg controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2701-infracfg", "syscon"
- - "mediatek,mt2712-infracfg", "syscon"
- - "mediatek,mt6765-infracfg", "syscon"
- - "mediatek,mt6779-infracfg_ao", "syscon"
- - "mediatek,mt6797-infracfg", "syscon"
- - "mediatek,mt7622-infracfg", "syscon"
- - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
- - "mediatek,mt7629-infracfg", "syscon"
- - "mediatek,mt7986-infracfg", "syscon"
- - "mediatek,mt8135-infracfg", "syscon"
- - "mediatek,mt8167-infracfg", "syscon"
- - "mediatek,mt8173-infracfg", "syscon"
- - "mediatek,mt8183-infracfg", "syscon"
- - "mediatek,mt8516-infracfg", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The infracfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-Also it uses the common reset controller binding from
-Documentation/devicetree/bindings/reset/reset.txt.
-The available reset outputs are defined in
-dt-bindings/reset/mt*-resets.h
-
-Example:
-
-infracfg: power-controller@10001000 {
- compatible = "mediatek,mt8173-infracfg", "syscon";
- reg = <0 0x10001000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
new file mode 100644
index 000000000000..8681b785ed6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Infrastructure System Configuration Controller
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+ The Mediatek infracfg controller provides various clocks and reset outputs
+ to the system. The clock values can be found in <dt-bindings/clock/mt*-clk.h>,
+ and reset values in <dt-bindings/reset/mt*-reset.h> and
+ <dt-bindings/reset/mt*-resets.h>.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-infracfg
+ - mediatek,mt2712-infracfg
+ - mediatek,mt6765-infracfg
+ - mediatek,mt6779-infracfg_ao
+ - mediatek,mt6797-infracfg
+ - mediatek,mt7622-infracfg
+ - mediatek,mt7629-infracfg
+ - mediatek,mt7986-infracfg
+ - mediatek,mt8135-infracfg
+ - mediatek,mt8167-infracfg
+ - mediatek,mt8173-infracfg
+ - mediatek,mt8183-infracfg
+ - mediatek,mt8516-infracfg
+ - const: syscon
+ - items:
+ - const: mediatek,mt7623-infracfg
+ - const: mediatek,mt2701-infracfg
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt2701-infracfg
+ - mediatek,mt2712-infracfg
+ - mediatek,mt7622-infracfg
+ - mediatek,mt7986-infracfg
+ - mediatek,mt8135-infracfg
+ - mediatek,mt8173-infracfg
+ - mediatek,mt8183-infracfg
+then:
+ required:
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ infracfg: clock-controller@10001000 {
+ compatible = "mediatek,mt8173-infracfg", "syscon";
+ reg = <0x10001000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
deleted file mode 100644
index b82422bb717f..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek topckgen controller
-============================
-
-The Mediatek topckgen controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2701-topckgen"
- - "mediatek,mt2712-topckgen", "syscon"
- - "mediatek,mt6765-topckgen", "syscon"
- - "mediatek,mt6779-topckgen", "syscon"
- - "mediatek,mt6797-topckgen"
- - "mediatek,mt7622-topckgen"
- - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
- - "mediatek,mt7629-topckgen"
- - "mediatek,mt7986-topckgen", "syscon"
- - "mediatek,mt8135-topckgen"
- - "mediatek,mt8167-topckgen", "syscon"
- - "mediatek,mt8173-topckgen"
- - "mediatek,mt8183-topckgen", "syscon"
- - "mediatek,mt8516-topckgen"
-- #clock-cells: Must be 1
-
-The topckgen controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-topckgen: power-controller@10000000 {
- compatible = "mediatek,mt8173-topckgen";
- reg = <0 0x10000000 0 0x1000>;
- #clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
deleted file mode 100644
index 46652bf65147..000000000000
--- a/Documentation/devicetree/bindings/arm/sp810.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SP810 System Controller
------------------------
-
-Required properties:
-
-- compatible: standard compatible string for a Primecell peripheral,
- see Documentation/devicetree/bindings/arm/primecell.yaml
- for more details
- should be: "arm,sp810", "arm,primecell"
-
-- reg: standard registers property, physical address and size
- of the control registers
-
-- clock-names: from the common clock bindings, for more details see
- Documentation/devicetree/bindings/clock/clock-bindings.txt;
- should be: "refclk", "timclk", "apb_pclk"
-
-- clocks: from the common clock bindings, phandle and clock
- specifier pairs for the entries of clock-names property
-
-- #clock-cells: from the common clock bindings;
- should be: <1>
-
-- clock-output-names: from the common clock bindings;
- should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
-
-- assigned-clocks: from the common clock binding;
- should be: clock specifier for each output clock of this
- provider node
-
-- assigned-clock-parents: from the common clock binding;
- should be: phandle of input clock listed in clocks
- property with the highest frequency
-
-Example:
- v2m_sysctl: sysctl@20000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x020000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
- assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-
- };
diff --git a/Documentation/devicetree/bindings/arm/sp810.yaml b/Documentation/devicetree/bindings/arm/sp810.yaml
new file mode 100644
index 000000000000..bc8e524aa90a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sp810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express SP810 System Controller bindings
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm SP810 system controller provides clocks, timers and a watchdog.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,sp810
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,sp810
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: refclk
+ - const: timclk
+ - const: apb_pclk
+
+ clocks:
+ items:
+ - description: reference clock
+ - description: timer clock
+ - description: APB register access clock
+
+ "#clock-cells":
+ const: 1
+
+ clock-output-names:
+ maxItems: 4
+
+ assigned-clocks:
+ maxItems: 4
+
+ assigned-clock-parents:
+ maxItems: 4
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - "#clock-cells"
+
+examples:
+ - |
+ sysctl@20000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1",
+ "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>,
+ <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>,
+ <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt
deleted file mode 100644
index 93372f2a7df9..000000000000
--- a/Documentation/devicetree/bindings/arm/spe-pmu.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
-
-ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
-performance sample data using an in-memory trace buffer.
-
-** SPE Required properties:
-
-- compatible : should be one of:
- "arm,statistical-profiling-extension-v1"
-
-- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where
- SPE is only supported on a subset of the CPUs, please consult
- the arm,gic-v3 binding for details on describing a PPI partition.
-
-** Example:
-
-spe-pmu {
- compatible = "arm,statistical-profiling-extension-v1";
- interrupts = <GIC_PPI 05 IRQ_TYPE_LEVEL_HIGH &part1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/vexpress-config.yaml b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
new file mode 100644
index 000000000000..09e1adf5ca7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-config.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express configuration bus bindings
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ This is a system control register block, acting as a bridge to the
+ platform's configuration bus via "system control" interface, addressing
+ devices with site number, position in the board stack, config controller,
+ function and device numbers - see motherboard's TRM for more details.
+
+properties:
+ compatible:
+ const: arm,vexpress,config-bus
+
+ arm,vexpress,config-bridge:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the sysreg node.
+
+ muxfpga:
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-muxfpga
+
+ arm,vexpress-sysreg,func:
+ description: FPGA specifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 7
+ - description: device number
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+ shutdown:
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-shutdown
+
+ arm,vexpress-sysreg,func:
+ description: shutdown identifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 8
+ - description: device number
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+ reboot:
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-reboot
+
+ arm,vexpress-sysreg,func:
+ description: reboot identifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 9
+ - description: device number
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+ dvimode:
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-dvimode
+
+ arm,vexpress-sysreg,func:
+ description: DVI mode identifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 11
+ - description: device number
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+additionalProperties: false
+
+required:
+ - compatible
+ - arm,vexpress,config-bridge
+
+patternProperties:
+ 'clk[0-9]*$':
+ type: object
+ description:
+ clocks
+
+ properties:
+ compatible:
+ const: arm,vexpress-osc
+
+ arm,vexpress-sysreg,func:
+ description: clock specifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 1
+ - description: clock number
+
+ freq-range:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: minimal clock frequency
+ - description: maximum clock frequency
+
+ "#clock-cells":
+ const: 0
+
+ clock-output-names:
+ maxItems: 1
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+ - "#clock-cells"
+
+ "^volt-.+$":
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ compatible:
+ const: arm,vexpress-volt
+
+ arm,vexpress-sysreg,func:
+ description: regulator specifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 2
+ - description: device number
+
+ label:
+ maxItems: 1
+
+ unevaluatedProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+ "^amp-.+$":
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-amp
+
+ arm,vexpress-sysreg,func:
+ description: current sensor identifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 3
+ - description: device number
+
+ label:
+ maxItems: 1
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+ "^temp-.+$":
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-temp
+
+ arm,vexpress-sysreg,func:
+ description: temperature sensor identifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 4
+ - description: device number
+
+ label:
+ maxItems: 1
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+ "^reset[0-9]*$":
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-reset
+
+ arm,vexpress-sysreg,func:
+ description: reset specifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 5
+ - description: reset device number
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+ "^power-.+$":
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-power
+
+ arm,vexpress-sysreg,func:
+ description: power sensor identifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - const: 12
+ - description: device number
+
+ label:
+ maxItems: 1
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+ "^energy(-.+)?$":
+ type: object
+ properties:
+ compatible:
+ const: arm,vexpress-energy
+
+ arm,vexpress-sysreg,func:
+ description: energy sensor identifier
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - items:
+ - const: 13
+ - description: device number
+ - items:
+ - const: 13
+ - description: device number
+ - const: 13
+ - description: second device number
+
+ label:
+ maxItems: 1
+
+ additionalProperties: false
+ required:
+ - compatible
+ - arm,vexpress-sysreg,func
+
+examples:
+ - |
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ clk0 {
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ #clock-cells = <0>;
+ };
+
+ energy {
+ compatible = "arm,vexpress-energy";
+ arm,vexpress-sysreg,func = <13 0>, <13 1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
deleted file mode 100644
index 50095802fb4a..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-ARM Versatile Express system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,vexpress,sysreg";
-- reg : physical base address and the size of the registers window
-
-Deprecated properties, replaced by GPIO subnodes (see below):
-- gpio-controller : specifies that the node is a GPIO controller
-- #gpio-cells : size of the GPIO specifier, should be 2:
- - first cell is the pseudo-GPIO line number:
- 0 - MMC CARDIN
- 1 - MMC WPROT
- 2 - NOR FLASH WPn
- - second cell can take standard GPIO flags (currently ignored).
-
-Control registers providing pseudo-GPIO lines must be represented
-by subnodes, each of them requiring the following properties:
-- compatible value : one of
- "arm,vexpress-sysreg,sys_led"
- "arm,vexpress-sysreg,sys_mci"
- "arm,vexpress-sysreg,sys_flash"
-- gpio-controller : makes the node a GPIO controller
-- #gpio-cells : size of the GPIO specifier, must be 2:
- - first cell is the function number:
- - for sys_led : 0..7 = LED 0..7
- - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
- - for sys_flash : 0 = NOR FLASH WPn
- - second cell can take standard GPIO flags (currently ignored).
-
-Example:
- v2m_sysreg: sysreg@10000000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x10000000 0x1000>;
-
- v2m_led_gpios: sys_led@8 {
- compatible = "arm,vexpress-sysreg,sys_led";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- v2m_mmc_gpios: sys_mci@48 {
- compatible = "arm,vexpress-sysreg,sys_mci";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- v2m_flash_gpios: sys_flash@4c {
- compatible = "arm,vexpress-sysreg,sys_flash";
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-
-This block also can also act a bridge to the platform's configuration
-bus via "system control" interface, addressing devices with site number,
-position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details. All configuration
-controller accessible via this interface must reference the sysreg
-node via "arm,vexpress,config-bridge" phandle and define appropriate
-topology properties - see main vexpress node documentation for more
-details. Each child of such node describes one function and must
-define the following properties:
-- compatible value : must be one of (corresponding to the TRM):
- "arm,vexpress-amp"
- "arm,vexpress-dvimode"
- "arm,vexpress-energy"
- "arm,vexpress-muxfpga"
- "arm,vexpress-osc"
- "arm,vexpress-power"
- "arm,vexpress-reboot"
- "arm,vexpress-reset"
- "arm,vexpress-scc"
- "arm,vexpress-shutdown"
- "arm,vexpress-temp"
- "arm,vexpress-volt"
-- arm,vexpress-sysreg,func : must contain a set of two cells long groups:
- - first cell of each group defines the function number
- (eg. 1 for clock generator, 2 for voltage regulators etc.)
- - second cell of each group defines device number (eg. osc 0,
- osc 1 etc.)
- - some functions (eg. energy meter, with its 64 bit long counter)
- are using more than one function/device number pair
-
-Example:
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- osc@0 {
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 0>;
- };
-
- energy@0 {
- compatible = "arm,vexpress-energy";
- arm,vexpress-sysreg,func = <13 0>, <13 1>;
- };
- };
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
new file mode 100644
index 000000000000..b5e26e41f88c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express system registers bindings
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ This is a system control registers block, providing multiple low level
+ platform functions like board detection and identification, software
+ interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+ compatible:
+ const: arm,vexpress-sysreg
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+additionalProperties: false
+
+patternProperties:
+ '^gpio@[0-9a-f]+$':
+ type: object
+ additionalProperties: false
+ description:
+ GPIO children
+
+ properties:
+ compatible:
+ enum:
+ - arm,vexpress-sysreg,sys_led
+ - arm,vexpress-sysreg,sys_mci
+ - arm,vexpress-sysreg,sys_flash
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ The first cell is the function number:
+ for sys_led : 0..7 = LED 0..7
+ for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+ for sys_flash : 0 = NOR FLASH WPn
+ The second cell can take standard GPIO flags.
+
+ reg:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ sysreg@0 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x00000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+
+ v2m_led_gpios: gpio@8 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ reg = <0x008 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
new file mode 100644
index 000000000000..770546195fb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek AP Mixedsys Controller
+
+maintainers:
+ - Michael Turquette <mturquette@baylibre.com>
+ - Stephen Boyd <sboyd@kernel.org>
+
+description:
+ The Mediatek apmixedsys controller provides PLLs to the system.
+ The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt6797-apmixedsys
+ - mediatek,mt7622-apmixedsys
+ - mediatek,mt7986-apmixedsys
+ - mediatek,mt8135-apmixedsys
+ - mediatek,mt8173-apmixedsys
+ - mediatek,mt8516-apmixedsys
+ - items:
+ - const: mediatek,mt7623-apmixedsys
+ - const: mediatek,mt2701-apmixedsys
+ - const: syscon
+ - items:
+ - enum:
+ - mediatek,mt2701-apmixedsys
+ - mediatek,mt2712-apmixedsys
+ - mediatek,mt6765-apmixedsys
+ - mediatek,mt6779-apmixedsys
+ - mediatek,mt7629-apmixedsys
+ - mediatek,mt8167-apmixedsys
+ - mediatek,mt8183-apmixedsys
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ apmixedsys: clock-controller@10209000 {
+ compatible = "mediatek,mt8173-apmixedsys";
+ reg = <0x10209000 0x1000>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
new file mode 100644
index 000000000000..5b8b37a2e594
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Top Clock Generator Controller
+
+maintainers:
+ - Michael Turquette <mturquette@baylibre.com>
+ - Stephen Boyd <sboyd@kernel.org>
+
+description:
+ The Mediatek topckgen controller provides various clocks to the system.
+ The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt6797-topckgen
+ - mediatek,mt7622-topckgen
+ - mediatek,mt8135-topckgen
+ - mediatek,mt8173-topckgen
+ - mediatek,mt8516-topckgen
+ - items:
+ - const: mediatek,mt7623-topckgen
+ - const: mediatek,mt2701-topckgen
+ - const: syscon
+ - items:
+ - enum:
+ - mediatek,mt2701-topckgen
+ - mediatek,mt2712-topckgen
+ - mediatek,mt6765-topckgen
+ - mediatek,mt6779-topckgen
+ - mediatek,mt7629-topckgen
+ - mediatek,mt7986-topckgen
+ - mediatek,mt8167-topckgen
+ - mediatek,mt8183-topckgen
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ topckgen: clock-controller@10000000 {
+ compatible = "mediatek,mt8173-topckgen";
+ reg = <0x10000000 0x1000>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
index b644bbd0df38..bee13436d1ea 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
@@ -61,4 +61,3 @@ examples:
clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
clock-names = "aclk200", "aclk400_mcuisp";
};
-
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
index 00648f9d9278..026a9f9e1aeb 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -82,4 +82,3 @@ examples:
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_CE>;
};
-
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index 343598c9f473..2e208d2fc98f 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -150,4 +150,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt
deleted file mode 100644
index 78bc24296f3e..000000000000
--- a/Documentation/devicetree/bindings/display/arm,hdlcd.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-ARM HDLCD
-
-This is a display controller found on several development platforms produced
-by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB
-streamer that reads the data from a framebuffer and sends it to a single
-digital encoder (DVI or HDMI).
-
-Required properties:
- - compatible: "arm,hdlcd"
- - reg: Physical base address and length of the controller's registers.
- - interrupts: One interrupt used by the display controller to notify the
- interrupt controller when any of the interrupt sources programmed in
- the interrupt mask register have activated.
- - clocks: A list of phandle + clock-specifier pairs, one for each
- entry in 'clock-names'.
- - clock-names: A list of clock names. For HDLCD it should contain:
- - "pxlclk" for the clock feeding the output PLL of the controller.
-
-Required sub-nodes:
- - port: The HDLCD connection to an encoder chip. The connection is modeled
- using the OF graph bindings specified in
- Documentation/devicetree/bindings/graph.txt.
-
-Optional properties:
- - memory-region: phandle to a node describing memory (see
- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be
- used for the framebuffer; if not present, the framebuffer may be located
- anywhere in memory.
-
-
-Example:
-
-/ {
- ...
-
- hdlcd@2b000000 {
- compatible = "arm,hdlcd";
- reg = <0 0x2b000000 0 0x1000>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&oscclk5>;
- clock-names = "pxlclk";
- port {
- hdlcd_output: endpoint@0 {
- remote-endpoint = <&hdmi_enc_input>;
- };
- };
- };
-
- /* HDMI encoder on I2C bus */
- i2c@7ffa0000 {
- ....
- hdmi-transmitter@70 {
- compatible = ".....";
- reg = <0x70>;
- port@0 {
- hdmi_enc_input: endpoint {
- remote-endpoint = <&hdlcd_output>;
- };
-
- hdmi_enc_output: endpoint {
- remote-endpoint = <&hdmi_1_port>;
- };
- };
- };
-
- };
-
- hdmi1: connector@1 {
- compatible = "hdmi-connector";
- type = "a";
- port {
- hdmi_1_port: endpoint {
- remote-endpoint = <&hdmi_enc_output>;
- };
- };
- };
-
- ...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
new file mode 100644
index 000000000000..a2670258c48d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm HDLCD display controller binding
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm HDLCD is a display controller found on several development platforms
+ produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an
+ RGB streamer that reads the data from a framebuffer and sends it to a single
+ digital encoder (DVI or HDMI).
+
+properties:
+ compatible:
+ const: arm,hdlcd
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ const: pxlclk
+
+ clocks:
+ maxItems: 1
+ description: The input reference for the pixel clock.
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ iommus:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+ description:
+ Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - port
+
+examples:
+ - |
+ hdlcd@2b000000 {
+ compatible = "arm,hdlcd";
+ reg = <0x2b000000 0x1000>;
+ interrupts = <0 85 4>;
+ clocks = <&oscclk5>;
+ clock-names = "pxlclk";
+ port {
+ hdlcd_output: endpoint {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+
+ /* HDMI encoder on I2C bus */
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ port {
+ hdmi_enc_input: endpoint {
+ remote-endpoint = <&hdlcd_output>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
deleted file mode 100644
index 8513695ee47f..000000000000
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
- in 'clock-names'
-- clock-names: A list of clock names. It should contain:
- - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
- enable iommu in display. for how to configure this node please reference
- devicetree/bindings/iommu/arm,smmu-v3.txt,
- devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
- in 'clock-names'
-- clock-names: should contain:
- - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
- modeled using the OF graph bindings specified in
- Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
- - memory-region: phandle to a node describing memory (see
- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
- to be used for the framebuffer; if not present, the framebuffer may
- be located anywhere in memory.
-
-Example:
-/ {
- ...
-
- dp0: display@c00000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "arm,mali-d71";
- reg = <0xc00000 0x20000>;
- interrupts = <0 168 4>;
- clocks = <&dpu_aclk>;
- clock-names = "aclk";
- iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
- <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
- <&smmu 8>, <&smmu 9>;
-
- dp0_pipe0: pipeline@0 {
- clocks = <&fpgaosc2>;
- clock-names = "pxclk";
- reg = <0>;
-
- port {
- dp0_pipe0_out: endpoint {
- remote-endpoint = <&db_dvi0_in>;
- };
- };
- };
-
- dp0_pipe1: pipeline@1 {
- clocks = <&fpgaosc2>;
- clock-names = "pxclk";
- reg = <1>;
-
- port {
- dp0_pipe1_out: endpoint {
- remote-endpoint = <&db_dvi1_in>;
- };
- };
- };
- };
- ...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml
new file mode 100644
index 000000000000..9f4aade97f10
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm Mali D71 display processor supports up to two displays with up
+ to a 4K resolution each. Each pipeline can be composed of up to four
+ layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: arm,mali-d32
+ - const: arm,mali-d71
+ - const: arm,mali-d71
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ const: aclk
+
+ clocks:
+ maxItems: 1
+ description: The main DPU processor clock
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ iommus:
+ description:
+ The stream IDs for each of the used pipelines, each four IDs for the
+ four layers, plus one for the write-back stream.
+ minItems: 5
+ maxItems: 10
+
+patternProperties:
+ '^pipeline@[01]$':
+ type: object
+ description:
+ clocks
+
+ properties:
+ reg:
+ enum: [ 0, 1 ]
+
+ clock-names:
+ const: pxclk
+
+ clocks:
+ maxItems: 1
+ description: The input reference for the pixel clock.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - pipeline@0
+
+examples:
+ - |
+ display@c00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,mali-d71";
+ reg = <0xc00000 0x20000>;
+ interrupts = <168>;
+ clocks = <&dpu_aclk>;
+ clock-names = "aclk";
+ iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+ <&smmu 8>,
+ <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+ <&smmu 9>;
+
+ dp0_pipe0: pipeline@0 {
+ clocks = <&fpgaosc2>;
+ clock-names = "pxclk";
+ reg = <0>;
+
+ port {
+ dp0_pipe0_out: endpoint {
+ remote-endpoint = <&db_dvi0_in>;
+ };
+ };
+ };
+
+ dp0_pipe1: pipeline@1 {
+ clocks = <&fpgaosc2>;
+ clock-names = "pxclk";
+ reg = <1>;
+
+ port {
+ dp0_pipe1_out: endpoint {
+ remote-endpoint = <&db_dvi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
deleted file mode 100644
index 7a97a2b48c2a..000000000000
--- a/Documentation/devicetree/bindings/display/arm,malidp.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-ARM Mali-DP
-
-The following bindings apply to a family of Display Processors sold as
-licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
-DP650 processors that offer multiple composition layers, support for
-rotation and scaling output.
-
-Required properties:
- - compatible: should be one of
- "arm,mali-dp500"
- "arm,mali-dp550"
- "arm,mali-dp650"
- depending on the particular implementation present in the hardware
- - reg: Physical base address and size of the block of registers used by
- the processor.
- - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
- interrupt client nodes.
- - interrupt-names: name of the engine inside the processor that will
- use the corresponding interrupt. Should be one of "DE" or "SE".
- - clocks: A list of phandle + clock-specifier pairs, one for each entry
- in 'clock-names'
- - clock-names: A list of clock names. It should contain:
- - "pclk": for the APB interface clock
- - "aclk": for the AXI interface clock
- - "mclk": for the main processor clock
- - "pxlclk": for the pixel clock feeding the output PLL of the processor.
- - arm,malidp-output-port-lines: Array of u8 values describing the number
- of output lines per channel (R, G and B).
-
-Required sub-nodes:
- - port: The Mali DP connection to an encoder input port. The connection
- is modelled using the OF graph bindings specified in
- Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
- - memory-region: phandle to a node describing memory (see
- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
- to be used for the framebuffer; if not present, the framebuffer may
- be located anywhere in memory.
- - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
- levels of DP500's QoS signaling.
-
-
-Example:
-
-/ {
- ...
-
- dp0: malidp@6f200000 {
- compatible = "arm,mali-dp650";
- reg = <0 0x6f200000 0 0x20000>;
- memory-region = <&display_reserved>;
- interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 168 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "DE", "SE";
- clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
- clock-names = "pxlclk", "mclk", "aclk", "pclk";
- arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
- arm,malidp-arqos-high-level = <0xd000d000>;
- port {
- dp0_output: endpoint {
- remote-endpoint = <&tda998x_2_input>;
- };
- };
- };
-
- ...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
new file mode 100644
index 000000000000..795a08ac9f12
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP) binding
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The following bindings apply to a family of Display Processors sold as
+ licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+ DP650 processors that offer multiple composition layers, support for
+ rotation and scaling output.
+
+properties:
+ compatible:
+ enum:
+ - arm,mali-dp500
+ - arm,mali-dp550
+ - arm,mali-dp650
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description:
+ The interrupt used by the Display Engine (DE). Can be shared with
+ the interrupt for the Scaling Engine (SE), but it will have to be
+ listed individually.
+ - description:
+ The interrupt used by the Scaling Engine (SE). Can be shared with
+ the interrupt for the Display Engine (DE), but it will have to be
+ listed individually.
+
+ interrupt-names:
+ items:
+ - const: DE
+ - const: SE
+
+ clock-names:
+ items:
+ - const: pxlclk
+ - const: mclk
+ - const: aclk
+ - const: pclk
+
+ clocks:
+ items:
+ - description: the pixel clock feeding the output PLL of the processor
+ - description: the main processor clock
+ - description: the AXI interface clock
+ - description: the APB interface clock
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ arm,malidp-output-port-lines:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Number of output lines/bits for each colour channel.
+ items:
+ - description: number of output lines for the red channel (R)
+ - description: number of output lines for the green channel (G)
+ - description: number of output lines for the blue channel (B)
+
+ arm,malidp-arqos-high-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ integer describing the ARQoS levels of DP500's QoS signaling
+
+ arm,malidp-arqos-value:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Quality-of-Service value for the display engine FIFOs, to write
+ into the RQOS register of the DP500.
+ See the ARM Mali-DP500 TRM for details on the encoding.
+ If omitted, the RQOS register will not be changed.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+ description:
+ Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - port
+ - arm,malidp-output-port-lines
+
+examples:
+ - |
+ dp0: malidp@6f200000 {
+ compatible = "arm,mali-dp650";
+ reg = <0x6f200000 0x20000>;
+ memory-region = <&display_reserved>;
+ interrupts = <168>, <168>;
+ interrupt-names = "DE", "SE";
+ clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+ clock-names = "pxlclk", "mclk", "aclk", "pclk";
+ arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+ arm,malidp-arqos-high-level = <0xd000d000>;
+
+ port {
+ dp0_output: endpoint {
+ remote-endpoint = <&tda998x_2_input>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
deleted file mode 100644
index 3f977e72a200..000000000000
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* ARM PrimeCell Color LCD Controller PL110/PL111
-
-See also Documentation/devicetree/bindings/arm/primecell.yaml
-
-Required properties:
-
-- compatible: must be one of:
- "arm,pl110", "arm,primecell"
- "arm,pl111", "arm,primecell"
-
-- reg: base address and size of the control registers block
-
-- interrupt-names: either the single entry "combined" representing a
- combined interrupt output (CLCDINTR), or the four entries
- "mbe", "vcomp", "lnbu", "fuf" representing the individual
- CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
-
-- interrupts: contains an interrupt specifier for each entry in
- interrupt-names
-
-- clock-names: should contain "clcdclk" and "apb_pclk"
-
-- clocks: contains phandle and clock specifier pairs for the entries
- in the clock-names property. See
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-
-- memory-region: phandle to a node describing memory (see
- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
- to be used for the framebuffer; if not present, the framebuffer
- may be located anywhere in the memory
-
-- max-memory-bandwidth: maximum bandwidth in bytes per second that the
- cell's memory interface can handle; if not present, the memory
- interface is fast enough to handle all possible video modes
-
-Required sub-nodes:
-
-- port: describes LCD panel signals, following the common binding
- for video transmitter interfaces; see
- Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Deprecated properties:
- The port's endbpoint subnode had this, now deprecated property
- in the past. Drivers should be able to survive without it:
-
- - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
- defining the way CLD pads are wired up; first value
- contains index of the "CLD" external pin (pad) used
- as R0 (first bit of the red component), second value
- index of the pad used as G0, third value index of the
- pad used as B0, see also "LCD panel signal multiplexing
- details" paragraphs in the PL110/PL111 Technical
- Reference Manuals; this implicitly defines available
- color modes, for example:
- - PL111 TFT 4:4:4 panel:
- arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
- - PL110 TFT (1:)5:5:5 panel:
- arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
- - PL111 TFT (1:)5:5:5 panel:
- arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
- - PL111 TFT 5:6:5 panel:
- arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
- - PL110 and PL111 TFT 8:8:8 panel:
- arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
- - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
- arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
-
-
-Example:
-
- clcd@10020000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x10020000 0x1000>;
- interrupt-names = "combined";
- interrupts = <0 44 4>;
- clocks = <&oscclk1>, <&oscclk2>;
- clock-names = "clcdclk", "apb_pclk";
- max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
-
- port {
- clcd_pads: endpoint {
- remote-endpoint = <&clcd_panel>;
- };
- };
-
- };
-
- panel {
- compatible = "panel-dpi";
-
- port {
- clcd_panel: endpoint {
- remote-endpoint = <&clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
- };
- };
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
new file mode 100644
index 000000000000..b545c6d20325
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,pl11x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PrimeCell Color LCD Controller PL110/PL111
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out
+ a framebuffer region in system memory, and creates timed signals for
+ a variety of LCD panels.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl110
+ - arm,pl111
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - arm,pl110
+ - arm,pl111
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupt-names:
+ oneOf:
+ - const: combined
+ description:
+ The IP provides four individual interrupt lines, but also one
+ combined line. If the integration only connects this line to the
+ interrupt controller, this single interrupt is noted here.
+ - items:
+ - const: mbe # CLCDMBEINTR
+ - const: vcomp # CLCDVCOMPINTR
+ - const: lnbu # CLCDLNBUINTR
+ - const: fuf # CLCDFUFINTR
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: clcdclk
+ - const: apb_pclk
+
+ clocks:
+ items:
+ - description: The CLCDCLK reference clock for the controller.
+ - description: The HCLK AHB slave clock for the register access.
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ max-memory-bandwidth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Maximum bandwidth in bytes per second that the cell's memory interface
+ can handle.
+ If not present, the memory interface is fast enough to handle all
+ possible video modes.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ description:
+ Output endpoint of the controller, connecting the LCD panel signals.
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ arm,pl11x,tft-r0g0b0-pads:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: index of CLD pad used for first red bit (R0)
+ - description: index of CLD pad used for first green bit (G0)
+ - description: index of CLD pad used for first blue bit (G0)
+ deprecated: true
+ description: |
+ DEPRECATED. An array of three 32-bit values, defining the way
+ CLD[23:0] pads are wired up.
+ The first value contains the index of the "CLD" external pin (pad)
+ used as R0 (first bit of the red component), the second value for
+ green, the third value for blue.
+ See also "LCD panel signal multiplexing details" paragraphs in the
+ PL110/PL111 Technical Reference Manuals.
+ This implicitly defines available color modes, for example:
+ - PL111 TFT 4:4:4 panel:
+ arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+ - PL110 TFT (1:)5:5:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+ - PL111 TFT (1:)5:5:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+ - PL111 TFT 5:6:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+ - PL110 and PL111 TFT 8:8:8 panel:
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+ arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clock-names
+ - clocks
+ - port
+
+allOf:
+ - if:
+ properties:
+ interrupts:
+ minItems: 2
+ required:
+ - interrupts
+ then:
+ required:
+ - interrupt-names
+
+examples:
+ - |
+ clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <44>;
+ clocks = <&oscclk1>, <&oscclk2>;
+ clock-names = "clcdclk", "apb_pclk";
+ max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&clcd_panel>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "arm,rtsm-display", "panel-dpi";
+ power-supply = <&vcc_supply>;
+
+ port {
+ clcd_panel: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
index a88a5d8c7ba5..a44d025d33bd 100644
--- a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -78,4 +78,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
index 186e17be51fb..8ab156e0a8cf 100644
--- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -119,4 +119,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
index 3bd670b8e5cd..0b6f5bef120f 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -58,6 +58,7 @@ properties:
properties:
data-lines:
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [ 16, 18, 24 ]
port@1:
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
index 0091df9dd73b..989ab312c1f4 100644
--- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -105,4 +105,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index d635c5dcb68b..69ba75777dac 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -102,4 +102,3 @@ examples:
clock-names = "merge";
};
};
-
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
index 20ce88ab4b3a..6058948a9764 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -75,4 +75,3 @@ examples:
};
};
...
-
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
index 17cbd0ad32bf..ad7d3575190e 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
@@ -50,4 +50,3 @@ examples:
};
};
...
-
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index 7749de95ee40..229e3b36ee29 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -146,6 +146,7 @@ properties:
Horizontal sync pulse.
0 selects active low, 1 selects active high.
If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
vsync-active:
@@ -153,6 +154,7 @@ properties:
Vertical sync pulse.
0 selects active low, 1 selects active high.
If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
de-active:
@@ -160,6 +162,7 @@ properties:
Data enable.
0 selects active low, 1 selects active high.
If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
pixelclk-active:
@@ -169,6 +172,7 @@ properties:
sample data on rising edge.
Use 1 to drive pixel data on rising edge and
sample data on falling edge
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
syncclk-active:
@@ -179,6 +183,7 @@ properties:
sample sync on rising edge of pixel clock.
Use 1 to drive sync on rising edge and
sample sync on falling edge of pixel clock
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
interlaced:
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
index 745dd247c409..617aa8c8c03a 100644
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
@@ -24,6 +24,7 @@ properties:
dsi-lanes:
description: Number of DSI lanes to be used must be <3> or <4>
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [3, 4]
v3p3-supply:
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
index ca959451557e..1cdc91b3439f 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -36,6 +36,7 @@ properties:
init-delay:
description: delay after initialization sequence [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
panel-width-mm:
description: physical panel width [mm]
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
index d0a5592bd89d..b3d5e1b96fae 100644
--- a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
@@ -63,4 +63,3 @@ examples:
compatible = "sprd,display-subsystem";
ports = <&dpu_out>;
};
-
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 01e2da23790b..d6ea4d62a2cf 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -75,4 +75,3 @@ examples:
};
...
-
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index 7b1833d6caa2..1e1d8549b7ef 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -51,4 +51,3 @@ examples:
};
...
-
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
index 87b4afd2cf62..00cfa3913652 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
@@ -104,4 +104,3 @@ examples:
};
...
-
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
deleted file mode 100644
index c94acbb8cb0c..000000000000
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to at24.yaml.
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 6b61a8cf6137..d14e0accbda8 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -120,7 +120,9 @@ properties:
- const: giantec,gt24c32a
- const: atmel,24c32
- items:
- - const: renesas,r1ex24128
+ - enum:
+ - renesas,r1ex24128
+ - samsung,s524ad0xd1
- const: atmel,24c128
label:
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index 80a28781845d..8e1a8b19d429 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -249,13 +249,13 @@ examples:
# be overridden or an appropriate parent bus node should be shown (such as on
# i2c buses).
#
- # Any includes used have to be explicitly included.
+ # Any includes used have to be explicitly included. Use 4-space indentation.
- |
node@1000 {
- compatible = "vendor,soc4-ip", "vendor,soc1-ip";
- reg = <0x1000 0x80>,
- <0x3000 0x80>;
- reg-names = "core", "aux";
- interrupts = <10>;
- interrupt-controller;
+ compatible = "vendor,soc4-ip", "vendor,soc1-ip";
+ reg = <0x1000 0x80>,
+ <0x3000 0x80>;
+ reg-names = "core", "aux";
+ interrupts = <10>;
+ interrupt-controller;
};
diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
new file mode 100644
index 000000000000..e62b30386ac2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4751 family GNSS Receiver Device Tree Bindings
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+ Broadcom GPS chips can be used over the UART or I2C bus. The UART
+ bus requires CTS/RTS support. The number of the capsule is more
+ elaborate than the compatibles BCM4751 may be printed
+ BCM4751IFBG for example.
+
+allOf:
+ - $ref: gnss-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm4751
+ - brcm,bcm4752
+ - brcm,bcm4753
+
+ reg:
+ description:
+ The I2C Address, not required on UART buses.
+
+ vdd-auxin-supply:
+ description:
+ Main voltage supply, pin name VDD_AUXIN, typically connected
+ directly to a battery such as LiIon 3.8V battery or a 2.6V supply.
+
+ vddio-supply:
+ description:
+ IO voltage supply, pin name VDDIO, typically 1.8V
+
+ reset-gpios:
+ maxItems: 1
+ description: An optional active low reset line, should be flagged with
+ GPIO_ACTIVE_LOW.
+
+ enable-gpios:
+ description: Enable GPIO line, connected to pins named REGPU or NSTANDBY.
+ If the line is active low such as NSTANDBY, it should be tagged
+ GPIO_ACTIVE_LOW.
+
+required:
+ - compatible
+ - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ gnss {
+ compatible = "brcm,bcm4751";
+ vdd-auxin-supply = <&vbat>;
+ reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ current-speed = <38400>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
deleted file mode 100644
index 80cb802813c5..000000000000
--- a/Documentation/devicetree/bindings/gnss/mediatek.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek-based GNSS Receiver DT binding
-
-Mediatek chipsets are used in GNSS-receiver modules produced by several
-vendors and can use a UART interface.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible : Must be
-
- "globaltop,pa6h"
-
-- vcc-supply : Main voltage regulator (pin name: VCC)
-
-Optional properties:
-
-- current-speed : Default UART baud rate
-- gnss-fix-gpios : GPIO used to determine device position fix state
- (pin name: FIX, 3D_FIX)
-- reset-gpios : GPIO used to reset the device (pin name: RESET, NRESET)
-- timepulse-gpios : Time pulse GPIO (pin name: PPS1, 1PPS)
-- vbackup-supply : Backup voltage regulator (pin name: VBAT, VBACKUP)
-
-Example:
-
-serial@1234 {
- compatible = "ns16550a";
-
- gnss {
- compatible = "globaltop,pa6h";
- vcc-supply = <&vcc_3v3>;
- };
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml
new file mode 100644
index 000000000000..45cf01b27700
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek GNSS Receiver Device Tree Bindings
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+
+description:
+ Mediatek chipsets are used in GNSS-receiver modules produced by several
+ vendors and can use a UART interface.
+
+allOf:
+ - $ref: gnss-common.yaml#
+
+properties:
+ compatible:
+ const: globaltop,pa6h
+
+ vcc-supply:
+ description:
+ Main voltage regulator, pin name VCC.
+
+ reset-gpios:
+ maxItems: 1
+ description: An optional reset line, with names such as RESET or NRESET.
+ If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
+
+ timepulse-gpios:
+ description: Comes with pin names such as PPS1 or 1PPS.
+
+ gnss-fix-gpios:
+ maxItems: 1
+ description: GPIO used to determine device position fix state, pin names
+ FIX or 3D_FIX.
+
+ vbackup-supply:
+ description:
+ Regulator providing backup voltage, pin names such as VBAT or VBACKUP.
+
+required:
+ - compatible
+ - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ gnss {
+ compatible = "globaltop,pa6h";
+ vcc-supply = <&vcc_3v3>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
index 5fe19fa5f67c..a99e7842ca17 100644
--- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -26,6 +26,7 @@ properties:
const: 2
registers-number:
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Number of daisy-chained shift registers
enable-gpios:
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index 62486f55177d..d60626ffb28e 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -53,4 +53,3 @@ examples:
clocks = <&clock 278>;
clock-names = "rotator";
};
-
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 22beb37f1bf1..56baf2e5c6d1 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -103,4 +103,3 @@ examples:
adi,pin14-function = "tach4";
};
};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
index bd67b0766599..0cdc3e890df7 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
@@ -36,4 +36,3 @@ examples:
};
};
...
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
deleted file mode 100644
index 026985b8f61a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* MediaTek's I2C controller
-
-The MediaTek's I2C controller is used to interface with I2C devices.
-
-Required properties:
- - compatible: value should be either of the following.
- "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
- "mediatek,mt2712-i2c": for MediaTek MT2712
- "mediatek,mt6577-i2c": for MediaTek MT6577
- "mediatek,mt6589-i2c": for MediaTek MT6589
- "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
- "mediatek,mt7622-i2c": for MediaTek MT7622
- "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
- "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
- "mediatek,mt8168-i2c": for MediaTek MT8168
- "mediatek,mt8173-i2c": for MediaTek MT8173
- "mediatek,mt8183-i2c": for MediaTek MT8183
- "mediatek,mt8186-i2c": for MediaTek MT8186
- "mediatek,mt8192-i2c": for MediaTek MT8192
- "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195
- "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
- - reg: physical base address of the controller and dma base, length of memory
- mapped region.
- - interrupts: interrupt number to the cpu.
- - clock-div: the fixed value for frequency divider of clock source in i2c
- module. Each IC may be different.
- - clocks: clock name from clock manager
- - clock-names: Must include "main" and "dma", "arb" is for multi-master that
- one bus has more than two i2c controllers, if enable have-pmic need include
- "pmic" extra.
-
-Optional properties:
- - clock-frequency: Frequency in Hz of the bus when transfer, the default value
- is 100000.
- - mediatek,have-pmic: platform can control i2c form special pmic side.
- Only mt6589 and mt8135 support this feature.
- - mediatek,use-push-pull: IO config use push-pull mode.
- - vbus-supply: phandle to the regulator that provides power to SCL/SDA.
-
-Example:
-
- i2c0: i2c@1100d000 {
- compatible = "mediatek,mt6577-i2c";
- reg = <0x1100d000 0x70>,
- <0x11000300 0x80>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
- clock-frequency = <400000>;
- mediatek,have-pmic;
- clock-div = <16>;
- clocks = <&i2c0_ck>, <&ap_dma_ck>;
- clock-names = "main", "dma";
- };
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
new file mode 100644
index 000000000000..16a1a3118204
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek I2C controller
+
+description:
+ This driver interfaces with the native I2C controller present in
+ various MediaTek SoCs.
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+ - Qii Wang <qii.wang@mediatek.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: mediatek,mt2712-i2c
+ - const: mediatek,mt6577-i2c
+ - const: mediatek,mt6589-i2c
+ - const: mediatek,mt7622-i2c
+ - const: mediatek,mt8168-i2c
+ - const: mediatek,mt8173-i2c
+ - const: mediatek,mt8183-i2c
+ - const: mediatek,mt8186-i2c
+ - const: mediatek,mt8192-i2c
+ - items:
+ - enum:
+ - mediatek,mt7629-i2c
+ - mediatek,mt8516-i2c
+ - const: mediatek,mt2712-i2c
+ - items:
+ - enum:
+ - mediatek,mt2701-i2c
+ - mediatek,mt6797-i2c
+ - mediatek,mt7623-i2c
+ - const: mediatek,mt6577-i2c
+ - items:
+ - enum:
+ - mediatek,mt8195-i2c
+ - const: mediatek,mt8192-i2c
+
+ reg:
+ items:
+ - description: Physical base address
+ - description: DMA base address
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ items:
+ - description: Main clock for I2C bus
+ - description: Clock for I2C via DMA
+ - description: Bus arbitrator clock
+ - description: Clock for I2C from PMIC
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: main
+ - const: dma
+ - const: arb
+ - const: pmic
+
+ clock-div:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Frequency divider of clock source in I2C module
+
+ clock-frequency:
+ default: 100000
+ description:
+ SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+ mediatek,have-pmic:
+ description: Platform controls I2C from PMIC side
+ type: boolean
+
+ mediatek,use-push-pull:
+ description: Use push-pull mode I/O config
+ type: boolean
+
+ vbus-supply:
+ description: Phandle to the regulator providing power to SCL/SDA
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-div
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c0: i2c@1100d000 {
+ compatible = "mediatek,mt6577-i2c";
+ reg = <0x1100d000 0x70>, <0x11000300 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&i2c0_ck>, <&ap_dma_ck>;
+ clock-names = "main", "dma";
+ clock-div = <16>;
+ clock-frequency = <400000>;
+ mediatek,have-pmic;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
index 9b0603a72f40..b6af924dee2e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
@@ -28,7 +28,6 @@ description: |+
'------------' '-----' '-----' '-----'
-
allOf:
- $ref: /schemas/i2c/i2c-mux.yaml#
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
new file mode 100644
index 000000000000..0e7ed00562e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP I2C Controller
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: qcom,geni-i2c
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: se
+
+ clock-frequency:
+ default: 100000
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interconnects:
+ maxItems: 3
+
+ interconnect-names:
+ items:
+ - const: qup-core
+ - const: qup-config
+ - const: qup-memory
+
+ interrupts:
+ maxItems: 1
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ required-opps:
+ maxItems: 1
+
+required:
+ - compatible
+ - interrupts
+ - clocks
+ - clock-names
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/interconnect/qcom,sc7180.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ i2c@88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x00880000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
deleted file mode 100644
index dc71754a56af..000000000000
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Qualcomm Universal Peripheral (QUP) I2C controller
-
-Required properties:
- - compatible: Should be:
- * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
- * "qcom,i2c-qup-v2.1.1" for 8974 v1.
- * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
- - reg: Should contain QUP register address and length.
- - interrupts: Should contain I2C interrupt.
-
- - clocks: A list of phandles + clock-specifiers, one for each entry in
- clock-names.
- - clock-names: Should contain:
- * "core" for the core clock
- * "iface" for the AHB clock
-
- - #address-cells: Should be <1> Address cells for i2c device address
- - #size-cells: Should be <0> as i2c addresses have no size component
-
-Optional properties:
- - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
- defaults to 100kHz if omitted.
-
-Child nodes should conform to i2c bus binding.
-
-Example:
-
- i2c@f9924000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9924000 0x1000>;
- interrupts = <0 96 0>;
-
- clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
-
- clock-frequency = <355000>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
new file mode 100644
index 000000000000..f43947514d48
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) I2C controller
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,i2c-qup-v1.1.1 # for 8660, 8960 and 8064
+ - qcom,i2c-qup-v2.1.1 # for 8974 v1
+ - qcom,i2c-qup-v2.2.1 # for 8974 v2 and later
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: iface
+
+ clock-frequency:
+ default: 100000
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ maxItems: 1
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - clock-names
+ - clocks
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c@c175000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c175000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c1_default>;
+ pinctrl-1 = <&blsp1_i2c1_sleep>;
+ clock-frequency = <400000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index f4b235a87ac6..2f315489aaae 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -19,6 +19,7 @@ properties:
- enum:
- renesas,riic-r7s72100 # RZ/A1H
- renesas,riic-r7s9210 # RZ/A2M
+ - renesas,riic-r9a07g043 # RZ/G2UL
- renesas,riic-r9a07g044 # RZ/G2{L,LC}
- renesas,riic-r9a07g054 # RZ/V2L
- const: renesas,riic-rz # RZ/A or RZ/G2L
@@ -75,6 +76,7 @@ if:
compatible:
contains:
enum:
+ - renesas,riic-r9a07g043
- renesas,riic-r9a07g044
- renesas,riic-r9a07g054
then:
diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
index c26230518957..3d5782deb97d 100644
--- a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -123,7 +123,7 @@ examples:
samsung,i2c-slave-addr = <0x66>;
eeprom@50 {
- compatible = "samsung,s524ad0xd1";
+ compatible = "samsung,s524ad0xd1", "atmel,24c128";
reg = <0x50>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
index 930f9e3904d7..0b2f5dc80600 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
@@ -44,4 +44,3 @@ examples:
};
};
...
-
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
index e51a585bd5a3..133b0f867992 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -41,7 +41,7 @@ examples:
spi {
#address-cells = <1>;
#size-cells = <0>;
-
+
dac@0 {
compatible = "lltc,ltc1660";
reg = <0>;
diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
index e8f137abb03c..aa61fe64be63 100644
--- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
+++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
@@ -31,6 +31,7 @@ properties:
type: boolean
function-row-physmap:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 15
description: |
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
deleted file mode 100644
index cdcaa3f52d25..000000000000
--- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
-
-Required properties:
-- compatible:
- ilitek,ili210x for ILI210x
- ilitek,ili2117 for ILI2117
- ilitek,ili2120 for ILI2120
- ilitek,ili251x for ILI251x
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchscreen's IRQ output
- See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-
-Example:
-
- touchscreen@41 {
- compatible = "ilitek,ili251x";
- reg = <0x41>;
- interrupt-parent = <&gpio4>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
index a190e7baac31..9f7328999756 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -15,6 +15,9 @@ allOf:
properties:
compatible:
enum:
+ - ilitek,ili210x
+ - ilitek,ili2117
+ - ilitek,ili2120
- ilitek,ili2130
- ilitek,ili2131
- ilitek,ili2132
@@ -22,11 +25,12 @@ properties:
- ilitek,ili2322
- ilitek,ili2323
- ilitek,ili2326
+ - ilitek,ili251x
- ilitek,ili2520
- ilitek,ili2521
reg:
- const: 0x41
+ maxItems: 1
interrupts:
maxItems: 1
@@ -50,7 +54,6 @@ required:
- compatible
- reg
- interrupts
- - reset-gpios
examples:
- |
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
deleted file mode 100644
index 4d47df1a5c91..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale Layerscape external IRQs
-
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
-LS1088A, LS208xA, LX216xA) support inverting
-the polarity of certain external interrupt lines.
-
-The device node must be a child of the node representing the
-Supplemental Configuration Unit (SCFG).
-
-Required properties:
-- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
- "fsl,ls1043a-extirq": for LS1043A, LS1046A.
- "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
-- #interrupt-cells: Must be 2. The first element is the index of the
- external interrupt line. The second element is the trigger type.
-- #address-cells: Must be 0.
-- interrupt-controller: Identifies the node as an interrupt controller
-- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
- the SCFG or the External Interrupt Control Register (IRQCR) in
- the ISC.
-- interrupt-map: Specifies the mapping from external interrupts to GIC
- interrupts.
-- interrupt-map-mask: Must be <0xffffffff 0>.
-
-Example:
- scfg: scfg@1570000 {
- compatible = "fsl,ls1021a-scfg", "syscon";
- reg = <0x0 0x1570000 0x0 0x10000>;
- big-endian;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x1570000 0x10000>;
-
- extirq: interrupt-controller@1ac {
- compatible = "fsl,ls1021a-extirq";
- #interrupt-cells = <2>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1ac 4>;
- interrupt-map =
- <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0xffffffff 0x0>;
- };
- };
-
-
- interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 000000000000..887e565b9573
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape External Interrupt Controller
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+ - Li Yang <leoyang.li@nxp.com>
+
+description: |
+ Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
+ LX216xA) support inverting the polarity of certain external interrupt
+ lines.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,ls1021a-extirq
+ - fsl,ls1043a-extirq
+ - fsl,ls1088a-extirq
+ - items:
+ - enum:
+ - fsl,ls1046a-extirq
+ - const: fsl,ls1043a-extirq
+ - items:
+ - enum:
+ - fsl,ls2080a-extirq
+ - fsl,lx2160a-extirq
+ - const: fsl,ls1088a-extirq
+
+ '#interrupt-cells':
+ const: 2
+
+ '#address-cells':
+ const: 0
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+ description:
+ Specifies the Interrupt Polarity Control Register (INTPCR) in the
+ SCFG or the External Interrupt Control Register (IRQCR) in the ISC.
+
+ interrupt-map:
+ description: Specifies the mapping from external interrupts to GIC interrupts.
+
+ interrupt-map-mask: true
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - '#address-cells'
+ - interrupt-controller
+ - reg
+ - interrupt-map
+ - interrupt-map-mask
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,ls1021a-extirq
+ then:
+ properties:
+ interrupt-map:
+ minItems: 6
+ maxItems: 6
+ interrupt-map-mask:
+ items:
+ - const: 0x7
+ - const: 0
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,ls1043a-extirq
+ - fsl,ls1046a-extirq
+ - fsl,ls1088a-extirq
+ - fsl,ls2080a-extirq
+ - fsl,lx2160a-extirq
+ then:
+ properties:
+ interrupt-map:
+ minItems: 12
+ maxItems: 12
+ interrupt-map-mask:
+ items:
+ - const: 0xf
+ - const: 0
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ interrupt-controller@1ac {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0x7 0x0>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
index 98d89e53013d..3b7b1134dea9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
@@ -21,8 +21,9 @@ Properties:
- "qcom,sc7180-pdc": For SC7180
- "qcom,sc7280-pdc": For SC7280
- "qcom,sdm845-pdc": For SDM845
- - "qcom,sdm8250-pdc": For SM8250
- - "qcom,sdm8350-pdc": For SM8350
+ - "qcom,sm6350-pdc": For SM6350
+ - "qcom,sm8250-pdc": For SM8250
+ - "qcom,sm8350-pdc": For SM8350
- reg:
Usage: required
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
index e87bfbcc6913..c57a53d87e4e 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
@@ -37,12 +37,18 @@ properties:
hardware supports just a single, combined interrupt line.
If provided, then the combined interrupt will be used in preference to
any others.
- - minItems: 2
+ - minItems: 1
items:
- - const: eventq # Event Queue not empty
- - const: gerror # Global Error activated
- - const: priq # PRI Queue not empty
- - const: cmdq-sync # CMD_SYNC complete
+ - enum:
+ - eventq # Event Queue not empty
+ - gerror # Global Error activated
+ - const: gerror
+ - enum:
+ - cmdq-sync # CMD_SYNC complete
+ - priq # PRI Queue not empty
+ - enum:
+ - cmdq-sync
+ - priq
'#iommu-cells':
const: 1
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index af51b91c893e..783c6b37c9f0 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -107,4 +107,3 @@ examples:
power-domains = <&pd_gsc>;
#iommu-cells = <0>;
};
-
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index 1c24b333c6e2..5d66c3e4def5 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -81,7 +81,7 @@ properties:
description: |
kHz; switching frequency.
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
+ enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
2400, 3200, 4800, 9600 ]
qcom,ovp:
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
index 10f95bf1d666..69e579226d9b 100644
--- a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
@@ -11,7 +11,7 @@ maintainers:
description: |
This module is part of the MT6360 MFD device.
- see Documentation/devicetree/bindings/mfd/mt6360.yaml
+ see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
and 4-channel RGB LED support Register/Flash/Breath Mode
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
index aa2b3bf56b57..ea06976fbbc7 100644
--- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -51,4 +51,3 @@ examples:
interrupts = <208>, <209>, <210>;
#mbox-cells = <1>;
};
-
diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
index 866efb278813..c57dd423e98c 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -27,6 +27,7 @@ properties:
- qcom,sm6350-ipcc
- qcom,sm8250-ipcc
- qcom,sm8350-ipcc
+ - qcom,sm8450-ipcc
- qcom,sc7280-ipcc
- const: qcom,ipcc
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
deleted file mode 100644
index ad76edccf881..000000000000
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Xilinx IPI Mailbox Controller
-========================================
-
-The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
-messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
-agent owns registers used for notification and buffers for message.
-
- +-------------------------------------+
- | Xilinx ZynqMP IPI Controller |
- +-------------------------------------+
- +--------------------------------------------------+
-ATF | |
- | |
- | |
- +--------------------------+ |
- | |
- | |
- +--------------------------------------------------+
- +------------------------------------------+
- | +----------------+ +----------------+ |
-Hardware | | IPI Agent | | IPI Buffers | |
- | | Registers | | | |
- | | | | | |
- | +----------------+ +----------------+ |
- | |
- | Xilinx IPI Agent Block |
- +------------------------------------------+
-
-
-Controller Device Node:
-===========================
-Required properties:
---------------------
-IPI agent node:
-- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox"
-- interrupt-parent: Phandle for the interrupt controller
-- interrupts: Interrupt information corresponding to the
- interrupt-names property.
-- xlnx,ipi-id: local Xilinx IPI agent ID
-- #address-cells: number of address cells of internal IPI mailbox nodes
-- #size-cells: number of size cells of internal IPI mailbox nodes
-
-Internal IPI mailbox node:
-- reg: IPI buffers address ranges
-- reg-names: Names of the reg resources. It should have:
- * local_request_region
- - IPI request msg buffer written by local and read
- by remote
- * local_response_region
- - IPI response msg buffer written by local and read
- by remote
- * remote_request_region
- - IPI request msg buffer written by remote and read
- by local
- * remote_response_region
- - IPI response msg buffer written by remote and read
- by local
-- #mbox-cells: Shall be 1. It contains:
- * tx(0) or rx(1) channel
-- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is
- connected to.
-
-Optional properties:
---------------------
-- method: The method of accessing the IPI agent registers.
- Permitted values are: "smc" and "hvc". Default is
- "smc".
-
-Client Device Node:
-===========================
-Required properties:
---------------------
-- mboxes: Standard property to specify a mailbox
- (See ./mailbox.txt)
-- mbox-names: List of identifier strings for each mailbox
- channel.
-
-Example:
-===========================
- zynqmp_ipi {
- compatible = "xlnx,zynqmp-ipi-mailbox";
- interrupt-parent = <&gic>;
- interrupts = <0 29 4>;
- xlnx,ipi-id = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* APU<->RPU0 IPI mailbox controller */
- ipi_mailbox_rpu0: mailbox@ff990400 {
- reg = <0xff990400 0x20>,
- <0xff990420 0x20>,
- <0xff990080 0x20>,
- <0xff9900a0 0x20>;
- reg-names = "local_request_region",
- "local_response_region",
- "remote_request_region",
- "remote_response_region";
- #mbox-cells = <1>;
- xlnx,ipi-id = <1>;
- };
- /* APU<->RPU1 IPI mailbox controller */
- ipi_mailbox_rpu1: mailbox@ff990440 {
- reg = <0xff990440 0x20>,
- <0xff990460 0x20>,
- <0xff990280 0x20>,
- <0xff9902a0 0x20>;
- reg-names = "local_request_region",
- "local_response_region",
- "remote_request_region",
- "remote_response_region";
- #mbox-cells = <1>;
- xlnx,ipi-id = <2>;
- };
- };
- rpu0 {
- ...
- mboxes = <&ipi_mailbox_rpu0 0>,
- <&ipi_mailbox_rpu0 1>;
- mbox-names = "tx", "rx";
- };
- rpu1 {
- ...
- mboxes = <&ipi_mailbox_rpu1 0>,
- <&ipi_mailbox_rpu1 1>;
- mbox-names = "tx", "rx";
- };
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
new file mode 100644
index 000000000000..2193141dd7fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx IPI(Inter Processor Interrupt) mailbox controller
+
+description: |
+ The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+ messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+ agent owns registers used for notification and buffers for message.
+
+ +-------------------------------------+
+ | Xilinx ZynqMP IPI Controller |
+ +-------------------------------------+
+ +--------------------------------------------------+
+ TF-A | |
+ | |
+ | |
+ +--------------------------+ |
+ | |
+ | |
+ +--------------------------------------------------+
+ +------------------------------------------+
+ | +----------------+ +----------------+ |
+ Hardware | | IPI Agent | | IPI Buffers | |
+ | | Registers | | | |
+ | | | | | |
+ | +----------------+ +----------------+ |
+ | |
+ | Xilinx IPI Agent Block |
+ +------------------------------------------+
+
+maintainers:
+ - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+
+properties:
+ compatible:
+ const: xlnx,zynqmp-ipi-mailbox
+
+ method:
+ description: |
+ The method of calling the PM-API firmware layer.
+ Permitted values are.
+ - "smc" : SMC #0, following the SMCCC
+ - "hvc" : HVC #0, following the SMCCC
+
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - smc
+ - hvc
+ default: smc
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 2
+
+ xlnx,ipi-id:
+ description: |
+ Remote Xilinx IPI agent ID of which the mailbox is connected to.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ interrupts:
+ maxItems: 1
+
+ ranges: true
+
+patternProperties:
+ '^mailbox@[0-9a-f]+$':
+ description: Internal ipi mailbox node
+ type: object # DT nodes are json objects
+ properties:
+ xlnx,ipi-id:
+ description:
+ Remote Xilinx IPI agent ID of which the mailbox is connected to.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ '#mbox-cells':
+ const: 1
+ description:
+ It contains tx(0) or rx(1) channel IPI id number.
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: local_request_region
+ - const: local_response_region
+ - const: remote_request_region
+ - const: remote_response_region
+
+ required:
+ - reg
+ - reg-names
+ - "#mbox-cells"
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - '#address-cells'
+ - '#size-cells'
+ - xlnx,ipi-id
+
+examples:
+ - |
+ #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+ amba {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ zynqmp-mailbox {
+ compatible = "xlnx,zynqmp-ipi-mailbox";
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ xlnx,ipi-id = <0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mailbox: mailbox@ff9905c0 {
+ reg = <0x0 0xff9905c0 0x0 0x20>,
+ <0x0 0xff9905e0 0x0 0x20>,
+ <0x0 0xff990e80 0x0 0x20>,
+ <0x0 0xff990ea0 0x0 0x20>;
+ reg-names = "local_request_region",
+ "local_response_region",
+ "remote_request_region",
+ "remote_response_region";
+ #mbox-cells = <1>;
+ xlnx,ipi-id = <4>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
index c19d8391e2d5..7589d377c686 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
@@ -60,7 +60,8 @@ properties:
enables hot-plug detection.
default-input:
- maxItems: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
description:
Select which input is selected after reset.
diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
index 3be8f64c3e21..8b37fccab5e2 100644
--- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -126,4 +126,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
new file mode 100644
index 000000000000..28eee02441ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
@@ -0,0 +1,256 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 PMIC from MediaTek Integrated
+
+maintainers:
+ - Gene Chen <gene_chen@richtek.com>
+
+description: |
+ MT6360 is a PMIC device with the following sub modules.
+ It is interfaced to host controller using I2C interface.
+
+ This document describes the binding for PMIC device and its sub module.
+
+properties:
+ compatible:
+ const: mediatek,mt6360
+
+ reg:
+ maxItems: 1
+
+ wakeup-source: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: IRQB
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description:
+ The first cell is the IRQ number.
+
+ regulators:
+ $ref: /schemas/regulator/mt6360-regulator.yaml#
+
+ charger:
+ $ref: /schemas/power/supply/mt6360_charger.yaml#
+
+ tcpc:
+ $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml#
+
+ led-controller:
+ $ref: /schemas/leds/leds-mt6360.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties:
+ type: object
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+ #include <dt-bindings/leds/common.h>
+ #include <dt-bindings/usb/pd.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@34 {
+ compatible = "mediatek,mt6360";
+ reg = <0x34>;
+ wakeup-source;
+ interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "IRQB";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ mt6360_charger: charger {
+ compatible = "mediatek,mt6360-chg";
+ richtek,vinovp-microvolt = <14500000>;
+
+ otg_vbus_regulator: usb-otg-vbus-regulator {
+ regulator-compatible = "usb-otg-vbus";
+ regulator-name = "usb-otg-vbus";
+ regulator-min-microvolt = <4425000>;
+ regulator-max-microvolt = <5825000>;
+ };
+ };
+
+ led-controller {
+ compatible = "mediatek,mt6360-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RGB>;
+ led-max-microamp = <24000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <150000>;
+ };
+ led@4 {
+ reg = <4>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ led@5 {
+ reg = <5>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <2>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ };
+
+ regulators {
+ compatible = "mediatek,mt6360-regulator";
+ LDO_VIN3-supply = <&BUCK2>;
+ buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "mt6360,buck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ BUCK2: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "mt6360,buck2";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "mt6360,ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "mt6360,ldo7";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "mt6360,ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "mt6360,ldo2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "mt6360,ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "mt6360,ldo5";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ };
+
+ tcpc {
+ compatible = "mediatek,mt6360-tcpc";
+ interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "PD_IRQB";
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&usb_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
index a461ec2f758f..eb78e3ae7703 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
@@ -59,7 +59,7 @@ Required properties for peripheral child nodes:
Optional properties for peripheral child nodes:
- interrupts: Interrupts are specified as a 4-tuple. For more information
see:
- Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+ Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
- interrupt-names: Corresponding interrupt name to the interrupts property
Each child node of SPMI slave id represents a function of the PMIC. In the
diff --git a/Documentation/devicetree/bindings/mtd/common.txt b/Documentation/devicetree/bindings/mtd/common.txt
deleted file mode 100644
index ae16f9ea8606..000000000000
--- a/Documentation/devicetree/bindings/mtd/common.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to mtd.yaml.
diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
index 74981520d6dd..a99de13c7ccd 100644
--- a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
@@ -17,7 +17,7 @@ spi-nor-controller@10000000 {
reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
reg-names = "control", "memory";
clocks = <&clock HI3519_FMC_CLK>;
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
};
diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml
index 60d5746eb39d..3b030b8fb47c 100644
--- a/Documentation/devicetree/bindings/mux/reg-mux.yaml
+++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml
@@ -25,8 +25,12 @@ properties:
const: 1
mux-reg-masks:
- description: an array of register offset and pre-shifted bitfield mask
- pairs, each describing a single mux control.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: register offset
+ - description: pre-shifted bitfield mask
+ description: Each entry pair describes a single mux control.
idle-states: true
diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
new file mode 100644
index 000000000000..1af52358de4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88178.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the USB Ethernet controllers
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+ Device tree properties for hard wired USB Ethernet devices.
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - usbb95,1720 # ASIX AX88172
+ - usbb95,172a # ASIX AX88172A
+ - usbb95,1780 # ASIX AX88178
+ - usbb95,7720 # ASIX AX88772
+ - usbb95,772a # ASIX AX88772A
+ - usbb95,772b # ASIX AX88772B
+ - usbb95,7e2b # ASIX AX88772B
+
+ reg: true
+ local-mac-address: true
+ mac-address: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@1 {
+ compatible = "usbb95,7e2b";
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ - |
+ usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb1@1 {
+ compatible = "usb1234,5678";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@1 {
+ compatible = "usbb95,772b";
+ reg = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
index e5b628736930..337cec4d85ca 100644
--- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -122,6 +122,7 @@ patternProperties:
reset-gpios: true
magic-packet:
+ type: boolean
description:
Indicates that the hardware supports waking up via magic packet.
diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
index 8e52b2e683b8..93b3e991d209 100644
--- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml
+++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
@@ -37,6 +37,7 @@ properties:
const: stmmaceth
mode-reg:
+ $ref: /schemas/types.yaml#/definitions/phandle
description: An extra syscon register that control ethernet interface and timing delay
rx-clk-delay-ps:
diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
new file mode 100644
index 000000000000..cf91fecd8909
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the USB Ethernet controllers
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+ Device tree properties for hard wired SMSC95xx compatible USB Ethernet
+ controller.
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - usb424,9500 # SMSC9500 USB Ethernet Device
+ - usb424,9505 # SMSC9505 USB Ethernet Device
+ - usb424,9530 # SMSC LAN9530 USB Ethernet Device
+ - usb424,9730 # SMSC LAN9730 USB Ethernet Device
+ - usb424,9900 # SMSC9500 USB Ethernet Device (SAL10)
+ - usb424,9901 # SMSC9505 USB Ethernet Device (SAL10)
+ - usb424,9902 # SMSC9500A USB Ethernet Device (SAL10)
+ - usb424,9903 # SMSC9505A USB Ethernet Device (SAL10)
+ - usb424,9904 # SMSC9512/9514 USB Hub & Ethernet Device (SAL10)
+ - usb424,9905 # SMSC9500A USB Ethernet Device (HAL)
+ - usb424,9906 # SMSC9505A USB Ethernet Device (HAL)
+ - usb424,9907 # SMSC9500 USB Ethernet Device (Alternate ID)
+ - usb424,9908 # SMSC9500A USB Ethernet Device (Alternate ID)
+ - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Devic. ID)
+ - usb424,9e00 # SMSC9500A USB Ethernet Device
+ - usb424,9e01 # SMSC9505A USB Ethernet Device
+ - usb424,9e08 # SMSC LAN89530 USB Ethernet Device
+ - usb424,ec00 # SMSC9512/9514 USB Hub & Ethernet Device
+
+ reg: true
+ local-mac-address: true
+ mac-address: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@1 {
+ compatible = "usb424,9e00";
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 58ecc62adfaa..dd4bb2e74880 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -182,6 +182,12 @@ examples:
smp2p-mpss {
compatible = "qcom,smp2p";
+ interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 6>;
+ qcom,smem = <94>, <432>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
ipa_smp2p_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
@@ -193,6 +199,7 @@ examples:
#interrupt-cells = <2>;
};
};
+
ipa@1e40000 {
compatible = "qcom,sdm845-ipa";
diff --git a/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
new file mode 100644
index 000000000000..6df533162632
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller
+
+maintainers:
+ - Nicolas Pitre <nico@fluxnic.net>
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+properties:
+ compatible:
+ const: smsc,lan91c111
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reg-shift: true
+
+ reg-io-width:
+ enum: [ 1, 2, 4 ]
+ default: 4
+
+ reset-gpios:
+ description: GPIO connected to control RESET pin
+ maxItems: 1
+
+ power-gpios:
+ description: GPIO connect to control PWRDWN pin
+ maxItems: 1
+
+ pxa-u16-align4:
+ description: put in place the workaround the force all u16 writes to be
+ 32 bits aligned
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ethernet@4010000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
deleted file mode 100644
index 309e37eb7c7c..000000000000
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-SMSC LAN91c111 Ethernet mac
-
-Required properties:
-- compatible = "smsc,lan91c111";
-- reg : physical address and size of registers
-- interrupts : interrupt connection
-
-Optional properties:
-- phy-device : see ethernet.txt file in the same directory
-- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
- are supported on the device. Valid value for SMSC LAN91c111 are
- 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning
- 16-bit access only.
-- power-gpios: GPIO to control the PWRDWN pin
-- reset-gpios: GPIO to control the RESET pin
-- pxa-u16-align4 : Boolean, put in place the workaround the force all
- u16 writes to be 32 bits aligned
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 6f44f9516c36..a339202c5e8e 100644
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -34,6 +34,7 @@ properties:
maxItems: 1
bus_freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
maximum: 2500000
description: MDIO Bus frequency
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
index a30419ef550a..b783ad0d1f53 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -142,4 +142,3 @@ examples:
assigned-clock-parents = <&k3_clks 118 11>;
};
};
-
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index 6b32caa8311c..8c01fdba134b 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -384,7 +384,7 @@ examples:
pcie0 {
#size-cells = <2>;
#address-cells = <3>;
-
+
wifi_0: wifi@0 {
reg = <0 0 0 0 0>;
memory-region = <&qcn9074_0>;
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
index 8dd164d10290..d68bb2ec1f7e 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -54,9 +54,11 @@ properties:
ref-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Reference clock frequency.
tcxo-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
description: TCXO clock frequency.
clock-xtal:
diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
index c819f0e90320..e374aa7891ae 100644
--- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
+++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
@@ -15,6 +15,10 @@ properties:
- fsl,imx6q-snvs-lpgpr
- fsl,imx6ul-snvs-lpgpr
- fsl,imx7d-snvs-lpgpr
+ - fsl,imx8mm-snvs-lpgpr
+ - fsl,imx8mn-snvs-lpgpr
+ - fsl,imx8mp-snvs-lpgpr
+ - fsl,imx8mq-snvs-lpgpr
required:
- compatible
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
index e59059ab5be0..b78535040f04 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -55,13 +55,15 @@ properties:
Translation Unit) registers.
num-ib-windows:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 256
description: number of inbound address translation windows
- maxItems: 1
deprecated: true
num-ob-windows:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 256
description: number of outbound address translation windows
- maxItems: 1
deprecated: true
required:
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index a5345c494744..c90e5e2d25f6 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -68,6 +68,8 @@ properties:
Translation Unit) registers.
num-viewport:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 256
description: |
number of view ports configured in hardware. If a platform
does not specify it, the driver autodetects it.
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
new file mode 100644
index 000000000000..f5926d0fb085
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe host controller
+
+description: |
+ UniPhier PCIe host controller is based on the Synopsys DesignWare
+ PCI core. It shares common features with the PCIe DesignWare core and
+ inherits common properties defined in
+ Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pcie
+
+ reg:
+ minItems: 3
+ maxItems: 4
+
+ reg-names:
+ minItems: 3
+ items:
+ - const: dbi
+ - const: link
+ - const: config
+ - const: atu
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ num-viewport: true
+
+ num-lanes: true
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie-phy
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pcie: pcie@66000000 {
+ compatible = "socionext,uniphier-pcie";
+ reg-names = "dbi", "link", "config";
+ reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ clocks = <&sys_clk 24>;
+ resets = <&sys_rst 24>;
+ num-lanes = <1>;
+ num-viewport = <1>;
+ bus-range = <0x0 0xff>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
+ <0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>;
+ phy-names = "pcie-phy";
+ phys = <&pcie_phy>;
+ #interrupt-cells = <1>;
+ interrupt-names = "dma", "msi";
+ interrupts = <0 224 4>, <0 225 4>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+
+ pcie_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 226 4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
deleted file mode 100644
index 359585db049f..000000000000
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Socionext UniPhier PCIe host controller bindings
-
-This describes the devicetree bindings for PCIe host controller implemented
-on Socionext UniPhier SoCs.
-
-UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and inherits
-common properties defined in
-Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
-
-Required properties:
-- compatible: Should be "socionext,uniphier-pcie".
-- reg: Specifies offset and length of the register set for the device.
- According to the reg-names, appropriate register sets are required.
-- reg-names: Must include the following entries:
- "dbi" - controller configuration registers
- "link" - SoC-specific glue layer registers
- "config" - PCIe configuration space
- "atu" - iATU registers for DWC version 4.80 or later
-- clocks: A phandle to the clock gate for PCIe glue layer including
- the host controller.
-- resets: A phandle to the reset line for PCIe glue layer including
- the host controller.
-- interrupts: A list of interrupt specifiers. According to the
- interrupt-names, appropriate interrupts are required.
-- interrupt-names: Must include the following entries:
- "dma" - DMA interrupt
- "msi" - MSI interrupt
-
-Optional properties:
-- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
- phys are required.
-- phy-names: Must be "pcie-phy".
-
-Required sub-node:
-- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI
- interrupts.
-
-Required properties for legacy-interrupt-controller:
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-- interrupt-parent: Phandle to the parent interrupt controller.
-- interrupts: An interrupt specifier for legacy interrupt.
-
-Example:
-
- pcie: pcie@66000000 {
- compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
- status = "disabled";
- reg-names = "dbi", "link", "config";
- reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
- <0x2fff0000 0x10000>;
- #address-cells = <3>;
- #size-cells = <2>;
- clocks = <&sys_clk 24>;
- resets = <&sys_rst 24>;
- num-lanes = <1>;
- num-viewport = <1>;
- bus-range = <0x0 0xff>;
- device_type = "pci";
- ranges =
- /* downstream I/O */
- <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000
- /* non-prefetchable memory */
- 0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>;
- #interrupt-cells = <1>;
- interrupt-names = "dma", "msi";
- interrupts = <0 224 4>, <0 225 4>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */
- <0 0 0 2 &pcie_intc 1>, /* INTB */
- <0 0 0 3 &pcie_intc 2>, /* INTC */
- <0 0 0 4 &pcie_intc 3>; /* INTD */
-
- pcie_intc: legacy-interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <0 226 4>;
- };
- };
diff --git a/Documentation/devicetree/bindings/perf/spe-pmu.yaml b/Documentation/devicetree/bindings/perf/spe-pmu.yaml
new file mode 100644
index 000000000000..7d74152f437e
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/spe-pmu.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/spe-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
+
+maintainers:
+ - Will Deacon <will@kernel.org>
+
+description:
+ ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
+ performance sample data using an in-memory trace buffer.
+
+properties:
+ compatible:
+ const: arm,statistical-profiling-extension-v1
+
+ interrupts:
+ maxItems: 1
+ description: |
+ The PPI to signal SPE events. For heterogeneous systems where SPE is only
+ supported on a subset of the CPUs, please consult the arm,gic-v3 binding
+ for details on describing a PPI partition.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ spe-pmu {
+ compatible = "arm,statistical-profiling-extension-v1";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
index 53e963e090f2..533b4cfe33d2 100644
--- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -120,6 +120,7 @@ patternProperties:
input-schmitt-disable: true
input-polarity-invert:
+ type: boolean
description:
Enable or disable pin input polarity inversion.
@@ -132,6 +133,7 @@ patternProperties:
output-low: true
output-polarity-invert:
+ type: boolean
description:
Enable or disable pin output polarity inversion.
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
index 7657721a4e96..86e5f6513bb3 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -40,4 +40,3 @@ examples:
#power-domain-cells = <1>;
};
};
-
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
index 3301fa0c2653..301db7daf870 100644
--- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
+++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
@@ -51,6 +51,7 @@ properties:
supported by the CPR power domain.
acc-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
description: A phandle to the syscon used for writing ACC settings.
nvmem-cells:
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index 62a49ca319ec..76c417990f12 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -10,9 +10,11 @@ maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
- Magnus Damm <magnus.damm@gmail.com>
-description:
+description: |
The R-Car (RZ/G) System Controller provides power management for the CPU
cores and various coprocessors.
+ The power domain IDs for consumers are defined in header files::
+ include/dt-bindings/power/r8*-sysc.h
properties:
compatible:
@@ -64,14 +66,3 @@ examples:
reg = <0xe6180000 0x0200>;
#power-domain-cells = <1>;
};
-
- - |
- // Power Domain consumers
- #include <dt-bindings/power/r8a7791-sysc.h>
-
- cache-controller-0 {
- compatible = "cache";
- power-domains = <&sysc R8A7791_PD_CA15_SCU>;
- cache-unified;
- cache-level = <2>;
- };
diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
index d56ac484fec5..491488e7b970 100644
--- a/Documentation/devicetree/bindings/power/supply/battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
@@ -85,8 +85,13 @@ properties:
description: battery factory internal resistance
resistance-temp-table:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: the temperature in degree Celsius
+ - description: battery internal resistance percent
description: |
- An array providing the temperature in degree Celsius
+ A table providing the temperature in degree Celsius
and corresponding battery internal resistance percent, which is used to
look up the resistance percent according to current temperature to get an
accurate batterty internal resistance in different temperatures.
diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
index c863cfa67865..fbb2204769aa 100644
--- a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
+++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
@@ -36,6 +36,7 @@ properties:
cm-poll-mode:
description: polling mode
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 0
enum:
- 0 # disabled
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index 2dda91587dc3..dc697b6147b2 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -78,4 +78,3 @@ examples:
power-supplies = <&mains_charger>, <&usb_charger>;
};
};
-
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
index 531b67225c74..9a490fbd32e1 100644
--- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -19,4 +19,3 @@ properties:
supply it power, referenced by their phandles.
additionalProperties: true
-
diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
index a23f6653f332..93654e732cda 100644
--- a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
+++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
@@ -87,4 +87,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
index a33408c3a407..2c2fe883bb48 100644
--- a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
@@ -24,7 +24,7 @@ properties:
items:
- const: USB
- const: AC
-
+
required:
- compatible
- interrupts
diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
index d722ae3be363..25ecfe14c698 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
@@ -2,7 +2,7 @@
Required properties:
- compatible: Shall contain "ti,omap-dmtimer-pwm".
-- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer.txt for info
+- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info
about these timers.
- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
the cells format.
diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
index 75087c6e001c..c0acf949753d 100644
--- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -104,4 +104,3 @@ examples:
resets = <&sys_rst 14>;
};
};
-
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index 836d4156d54c..a5a27ee0a9e6 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -51,4 +51,3 @@ examples:
};
...
-
diff --git a/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
index f4c351a69542..0391871cf44d 100644
--- a/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
+++ b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
@@ -142,4 +142,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
deleted file mode 100644
index ea0a6a9734c1..000000000000
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Hisilicon System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-The reset controller registers are part of the system-ctl block on
-hi6220 SoC.
-
-Required properties:
-- compatible: should be one of the following:
- - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller.
- - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller.
- - "hisilicon,hi6220-aoctrl", "syscon" : For ao reset controller.
-- reg: should be register base and length as documented in the
- datasheet
-- #reset-cells: 1, see below
-
-Example:
-sys_ctrl: sys_ctrl@f7030000 {
- compatible = "hisilicon,hi6220-sysctrl", "syscon";
- reg = <0x0 0xf7030000 0x0 0x2000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-example:
-
- uart1: serial@..... {
- ...
- resets = <&sys_ctrl PERIPH_RSTEN3_UART1>;
- ...
- };
-
-The index could be found in <dt-bindings/reset/hisi,hi6220-resets.h>.
diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
index 578bfa529b16..81cd8c837623 100644
--- a/Documentation/devicetree/bindings/reset/microchip,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
@@ -57,4 +57,3 @@ examples:
#reset-cells = <1>;
cpu-syscon = <&cpu_ctrl>;
};
-
diff --git a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
index 61963fa9347e..067e71e8ebe8 100644
--- a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
@@ -33,4 +33,3 @@ examples:
compatible = "intel,ixp46x-rng";
reg = <0x70002100 4>;
};
-
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
index 9a6e4eaf4d3c..fcd86f822a9c 100644
--- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
@@ -27,6 +27,7 @@ properties:
maxItems: 1
clock-error-detect:
+ type: boolean
description: If set enable the clock detection management
required:
diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt
deleted file mode 100644
index b8d36fce5e2d..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to rtc.yaml.
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 3bab2f27b970..5f6b113d378f 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -138,6 +138,7 @@ properties:
description: The current active speed of the UART.
reg-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Offset to apply to the mapbase from the start of the registers.
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
deleted file mode 100644
index 9d098cf73b53..000000000000
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-* MSM Serial UARTDM
-
-The MSM serial UARTDM hardware is designed for high-speed use cases where the
-transmit and/or receive channels can be offloaded to a dma-engine. From a
-software perspective it's mostly compatible with the MSM serial UART except
-that it supports reading and writing multiple characters at a time.
-
-Required properties:
-- compatible: Should contain at least "qcom,msm-uartdm".
- A more specific property should be specified as follows depending
- on the version:
- "qcom,msm-uartdm-v1.1"
- "qcom,msm-uartdm-v1.2"
- "qcom,msm-uartdm-v1.3"
- "qcom,msm-uartdm-v1.4"
-- reg: Should contain UART register locations and lengths. The first
- register shall specify the main control registers. An optional second
- register location shall specify the GSBI control region.
- "qcom,msm-uartdm-v1.3" is the only compatible value that might
- need the GSBI control region.
-- interrupts: Should contain UART interrupt.
-- clocks: Should contain the core clock and the AHB clock.
-- clock-names: Should be "core" for the core clock and "iface" for the
- AHB clock.
-
-Optional properties:
-- dmas: Should contain dma specifiers for transmit and receive channels
-- dma-names: Should contain "tx" for transmit and "rx" for receive channels
-- qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
- used with TX DMA channel. Required when using DMA for transmission
- with UARTDM v1.3 and below.
-- qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
- used with RX DMA channel. Required when using DMA for reception
- with UARTDM v1.3 and below.
-
-Note: Aliases may be defined to ensure the correct ordering of the UARTs.
-The alias serialN will result in the UART being assigned port N. If any
-serialN alias exists, then an alias must exist for each enabled UART. The
-serialN aliases should be in a .dts file instead of in a .dtsi file.
-
-Examples:
-
-- A uartdm v1.4 device with dma capabilities.
-
- serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
- clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
- clock-names = "core", "iface";
- dmas = <&dma0 0>, <&dma0 1>;
- dma-names = "tx", "rx";
- };
-
-- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
-
- serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
- clock-names = "core", "iface";
- };
-
-- serialN alias.
-
- aliases {
- serial0 = &uarta;
- serial1 = &uartc;
- serial2 = &uartb;
- };
-
- uarta: serial@12490000 {
- };
-
- uartb: serial@16340000 {
- };
-
- uartc: serial@1a240000 {
- };
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
new file mode 100644
index 000000000000..484b9a51f6a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,msm-uartdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM Serial UARTDM
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+ The MSM serial UARTDM hardware is designed for high-speed use cases where the
+ transmit and/or receive channels can be offloaded to a dma-engine. From a
+ software perspective it's mostly compatible with the MSM serial UART except
+ that it supports reading and writing multiple characters at a time.
+
+ Note:: Aliases may be defined to ensure the correct ordering of the UARTs.
+ The alias serialN will result in the UART being assigned port N. If any
+ serialN alias exists, then an alias must exist for each enabled UART. The
+ serialN aliases should be in a .dts file instead of in a .dtsi file.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,msm-uartdm-v1.1
+ - qcom,msm-uartdm-v1.2
+ - qcom,msm-uartdm-v1.3
+ - qcom,msm-uartdm-v1.4
+ - const: qcom,msm-uartdm
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: iface
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ maxItems: 1
+
+ qcom,rx-crci:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Identificator for Client Rate Control Interface to be used with RX DMA
+ channel. Required when using DMA for reception with UARTDM v1.3 and
+ below.
+
+ qcom,tx-crci:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Identificator for Client Rate Control Interface to be used with TX DMA
+ channel. Required when using DMA for transmission with UARTDM v1.3 and
+ below.
+
+ reg:
+ minItems: 1
+ items:
+ - description: Main control registers
+ - description: An optional second register location shall specify the GSBI control region.
+
+required:
+ - compatible
+ - clock-names
+ - clocks
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/serial/serial.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,msm-uartdm-v1.3
+ then:
+ properties:
+ reg:
+ minItems: 2
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+ clock-names = "core", "iface";
+ dmas = <&dma0 0>, <&dma0 1>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
index a444bebd2c1a..da0e2745b5fc 100644
--- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
@@ -35,7 +35,7 @@ properties:
clock-names:
description: |
- "enable" for UART module enable clock, "uart" for UART clock, "source"
+ "enable" for UART module enable clock, "uart" for UART clock, "source"
for UART source (parent) clock.
items:
- const: enable
diff --git a/Documentation/devicetree/bindings/serio/arm,pl050.yaml b/Documentation/devicetree/bindings/serio/arm,pl050.yaml
new file mode 100644
index 000000000000..d80f58d15497
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/arm,pl050.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/arm,pl050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL050 PS/2 Keyboard/Mouse Interface
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm PrimeCell PS2 Keyboard/Mouse Interface (KMI) is an AMBA compliant
+ peripheral that can be used to implement a keyboard or mouse interface that
+ is IBM PS2 or AT compatible.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,pl050
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,pl050
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: KMI reference clock, used to generate the bus timing
+ - description: APB register access clock
+
+ clock-names:
+ items:
+ - const: KMIREFCLK
+ - const: apb_pclk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ serio@70000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <8>;
+ clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
index 02b2d5ba01d6..17db87cb9dab 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -48,4 +48,3 @@ examples:
compatible = "amlogic,canvas";
reg = <0x48 0x14>;
};
-
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
new file mode 100644
index 000000000000..397f75909b20
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Device Configuration Unit
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+ - Li Yang <leoyang.li@nxp.com>
+
+description: |
+ DCFG is the device configuration unit, that provides general purpose
+ configuration and status for the device. Such as setting the secondary
+ core start address and release the secondary core from holdoff and
+ startup.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,ls1012a-dcfg
+ - fsl,ls1021a-dcfg
+ - fsl,ls1043a-dcfg
+ - fsl,ls1046a-dcfg
+ - fsl,ls1088a-dcfg
+ - fsl,ls2080a-dcfg
+ - fsl,lx2160a-dcfg
+ - const: syscon
+
+ - items:
+ - enum:
+ - fsl,ls1028a-dcfg
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ little-endian: true
+ big-endian: true
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^clock-controller@[0-9a-z]+$":
+ $ref: /schemas/clock/fsl,flexspi-clock.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@1ee0000 {
+ compatible = "fsl,ls1021a-dcfg", "syscon";
+ reg = <0x1ee0000 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
new file mode 100644
index 000000000000..8d088b5fe823
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Supplemental Configuration Unit
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+ - Li Yang <leoyang.li@nxp.com>
+
+description: |
+ SCFG is the supplemental configuration unit, that provides SoC specific
+ configuration and status registers for the chip. Such as getting PEX port
+ status.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,ls1012a-scfg
+ - fsl,ls1021a-scfg
+ - fsl,ls1028a-scfg
+ - fsl,ls1043a-scfg
+ - fsl,ls1046a-scfg
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ little-endian: true
+ big-endian: true
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^interrupt-controller@[a-z0-9]+$":
+ $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@1570000 {
+ compatible = "fsl,ls1021a-scfg", "syscon";
+ reg = <0x1570000 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 95fcb43675d6..3f41c202b77b 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -7,8 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: GENI Serial Engine QUP Wrapper Controller
maintainers:
- - Mukesh Savaliya <msavaliy@codeaurora.org>
- - Akash Asthana <akashast@codeaurora.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
description: |
Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
deleted file mode 100644
index fe1855f09dcc..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-QCOM GSBI (General Serial Bus Interface) Driver
-
-The GSBI controller is modeled as a node with zero or more child nodes, each
-representing a serial sub-node device that is mux'd as part of the GSBI
-configuration settings. The mode setting will govern the input/output mode of
-the 4 GSBI IOs.
-
-Required properties:
-- compatible: Should contain "qcom,gsbi-v1.0.0"
-- cell-index: Should contain the GSBI index
-- reg: Address range for GSBI registers
-- clocks: required clock
-- clock-names: must contain "iface" entry
-- qcom,mode : indicates MUX value for configuration of the serial interface.
- Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
-
-Optional properties:
-- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference
- dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
-- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses
- dma.
-
-Required properties if child node exists:
-- #address-cells: Must be 1
-- #size-cells: Must be 1
-- ranges: Must be present
-
-Properties for children:
-
-A GSBI controller node can contain 0 or more child nodes representing serial
-devices. These serial devices can be a QCOM UART, I2C controller, spi
-controller, or some combination of aforementioned devices.
-
-See the following for child node definitions:
-Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
-
-Example for APQ8064:
-
-#include <dt-bindings/soc/qcom,gsbi.h>
-
- gsbi4@16300000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <4>;
- reg = <0x16300000 0x100>;
- clocks = <&gcc GSBI4_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- qcom,mode = <GSBI_PROT_I2C_UART>;
- qcom,crci = <GSBI_CRCI_QUP>;
-
- syscon-tcsr = <&tcsr>;
-
- /* child nodes go under here */
-
- i2c_qup4: i2c@16380000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x16380000 0x1000>;
- interrupts = <0 153 0>;
-
- clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
- clock-names = "core", "iface";
-
- clock-frequency = <200000>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- };
-
- uart4: serial@16340000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16340000 0x1000>,
- <0x16300000 0x1000>;
- interrupts = <0 152 0x0>;
- clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
- clock-names = "core", "iface";
- };
- };
-
- tcsr: syscon@1a400000 {
- compatible = "qcom,apq8064-tcsr", "syscon";
- reg = <0x1a400000 0x100>;
- };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
new file mode 100644
index 000000000000..c33704333e49
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm General Serial Bus Interface (GSBI)
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ The GSBI controller is modeled as a node with zero or more child nodes, each
+ representing a serial sub-node device that is mux'd as part of the GSBI
+ configuration settings. The mode setting will govern the input/output mode
+ of the 4 GSBI IOs.
+
+ A GSBI controller node can contain 0 or more child nodes representing serial
+ devices. These serial devices can be a QCOM UART, I2C controller, spi
+ controller, or some combination of aforementioned devices.
+
+properties:
+ compatible:
+ const: qcom,gsbi-v1.0.0
+
+ '#address-cells':
+ const: 1
+
+ cell-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The GSBI index.
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: iface
+
+ qcom,crci:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ CRCI MUX value for QUP CRCI ports. Please reference
+ include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+
+ qcom,mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ MUX value for configuration of the serial interface. Please reference
+ include/dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+ '#size-cells':
+ const: 1
+
+ syscon-tcsr:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle of TCSR syscon node.Required if child uses dma.
+
+ ranges: true
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "spi@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/spi/qcom,spi-qup.yaml#
+
+ "i2c@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/i2c/qcom,i2c-qup.yaml#
+
+ "serial@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/serial/qcom,msm-uartdm.yaml#
+
+required:
+ - compatible
+ - cell-index
+ - clocks
+ - clock-names
+ - qcom,mode
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/qcom,gsbi.h>
+
+ gsbi@12440000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x12440000 0x100>;
+ cell-index = <1>;
+ clocks = <&gcc GSBI1_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+
+ serial@12450000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x12450000 0x100>,
+ <0x12400000 0x03>;
+ interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ i2c@12460000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x12460000 0x1000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-1 = <&i2c1_pins_sleep>;
+ pinctrl-names = "default", "sleep";
+ interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled"; /* UART chosen */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index b32457c2fc0b..3361218e278f 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -34,6 +34,7 @@ properties:
- qcom,rpm-ipq6018
- qcom,rpm-msm8226
- qcom,rpm-msm8916
+ - qcom,rpm-msm8936
- qcom,rpm-msm8953
- qcom,rpm-msm8974
- qcom,rpm-msm8976
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
deleted file mode 100644
index 49e1d72d3648..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-Qualcomm Shared Memory Point 2 Point binding
-
-The Shared Memory Point to Point (SMP2P) protocol facilitates communication of
-a single 32-bit value between two processors. Each value has a single writer
-(the local side) and a single reader (the remote side). Values are uniquely
-identified in the system by the directed edge (local processor ID to remote
-processor ID) and a string identifier.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,smp2p"
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: one entry specifying the smp2p notification interrupt
-
-- mboxes:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to the associated doorbell in APCS, as described
- in mailbox/mailbox.txt
-
-- qcom,ipc:
- Usage: required, unless mboxes is specified
- Value type: <prop-encoded-array>
- Definition: three entries specifying the outgoing ipc bit used for
- signaling the remote end of the smp2p edge:
- - phandle to a syscon node representing the apcs registers
- - u32 representing offset to the register within the syscon
- - u32 representing the ipc bit within the register
-
-- qcom,smem:
- Usage: required
- Value type: <u32 array>
- Definition: two identifiers of the inbound and outbound smem items used
- for this edge
-
-- qcom,local-pid:
- Usage: required
- Value type: <u32>
- Definition: specifies the identifier of the local endpoint of this edge
-
-- qcom,remote-pid:
- Usage: required
- Value type: <u32>
- Definition: specifies the identifier of the remote endpoint of this edge
-
-= SUBNODES
-Each SMP2P pair contain a set of inbound and outbound entries, these are
-described in subnodes of the smp2p device node. The node names are not
-important.
-
-- qcom,entry-name:
- Usage: required
- Value type: <string>
- Definition: specifies the name of this entry, for inbound entries this
- will be used to match against the remotely allocated entry
- and for outbound entries this name is used for allocating
- entries
-
-- interrupt-controller:
- Usage: required for incoming entries
- Value type: <empty>
- Definition: marks the entry as inbound; the node should be specified
- as a two cell interrupt-controller as defined in
- "../interrupt-controller/interrupts.txt"
- If not specified this node will denote the outgoing entry
-
-- #interrupt-cells:
- Usage: required for incoming entries
- Value type: <u32>
- Definition: must be 2 - denoting the bit in the entry and IRQ flags
-
-- #qcom,smem-state-cells:
- Usage: required for outgoing entries
- Value type: <u32>
- Definition: must be 1 - denoting the bit in the entry
-
-= EXAMPLE
-The following example shows the SMP2P setup with the wireless processor,
-defined from the 8974 apps processor's point-of-view. It encompasses one
-inbound and one outbound entry:
-
-wcnss-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <431>, <451>;
-
- interrupts = <0 143 1>;
-
- qcom,ipc = <&apcs 8 18>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <4>;
-
- wcnss_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
-
- #qcom,smem-state-cells = <1>;
- };
-
- wcnss_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
new file mode 100644
index 000000000000..795bd8cd4104
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Point 2 Point
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ The Shared Memory Point to Point (SMP2P) protocol facilitates communication
+ of a single 32-bit value between two processors. Each value has a single
+ writer (the local side) and a single reader (the remote side). Values are
+ uniquely identified in the system by the directed edge (local processor ID to
+ remote processor ID) and a string identifier.
+
+properties:
+ compatible:
+ const: qcom,smp2p
+
+ interrupts:
+ maxItems: 1
+
+ mboxes:
+ maxItems: 1
+ description:
+ Reference to the mailbox representing the outgoing doorbell in APCS for
+ this client.
+
+ qcom,ipc:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to a syscon node representing the APCS registers
+ - description: u32 representing offset to the register within the syscon
+ - description: u32 representing the ipc bit within the register
+ description:
+ Three entries specifying the outgoing ipc bit used for signaling the
+ remote end of the smp2p edge.
+
+ qcom,local-pid:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The identifier of the local endpoint of this edge.
+
+ qcom,remote-pid:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The identifier of the remote endpoint of this edge.
+
+ qcom,smem:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ maxItems: 2
+ description:
+ Two identifiers of the inbound and outbound smem items used for this edge.
+
+patternProperties:
+ "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$":
+ type: object
+ description:
+ Each SMP2P pair contain a set of inbound and outbound entries, these are
+ described in subnodes of the smp2p device node. The node names are not
+ important.
+
+ properties:
+ interrupt-controller:
+ description:
+ Marks the entry as inbound; the node should be specified as a two
+ cell interrupt-controller. If not specified this node will denote
+ the outgoing entry.
+
+ '#interrupt-cells':
+ const: 2
+
+ qcom,entry-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The name of this entry, for inbound entries this will be used to
+ match against the remotely allocated entry and for outbound entries
+ this name is used for allocating entries.
+
+ '#qcom,smem-state-cells':
+ $ref: /schemas/types.yaml#/definitions/uint32
+ const: 1
+ description:
+ Required for outgoing entries.
+
+ required:
+ - qcom,entry-name
+
+ oneOf:
+ - required:
+ - interrupt-controller
+ - '#interrupt-cells'
+ - required:
+ - '#qcom,smem-state-cells'
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - qcom,local-pid
+ - qcom,remote-pid
+ - qcom,smem
+
+oneOf:
+ - required:
+ - mboxes
+ - required:
+ - qcom,ipc
+
+additionalProperties: false
+
+examples:
+ # The following example shows the SMP2P setup with the wireless processor,
+ # defined from the 8974 apps processor's point-of-view. It encompasses one
+ # inbound and one outbound entry.
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ shared-memory {
+ compatible = "qcom,smp2p";
+ qcom,smem = <431>, <451>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 18>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
new file mode 100644
index 000000000000..0df41c4f60c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/wkup-m3-ipc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wakeup M3 IPC device
+
+maintainers:
+ - Dave Gerlach <d-gerlach@ti.com>
+ - Drew Fustini <dfustini@baylibre.com>
+
+description: |+
+ The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+ (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+ that cannot be controlled from the MPU, like suspend/resume and certain deep
+ C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver
+ to boot the wkup_m3, it handles communication with the CM3 using IPC registers
+ present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an
+ API to allow the SoC PM code to execute specific PM tasks.
+
+ Wkup M3 Device Node
+ ====================
+ A wkup_m3_ipc device node is used to represent the IPC registers within an
+ SoC.
+
+ Support for VTT Toggle with GPIO pin
+ ====================================
+ On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is
+ connected to the enable pin on the DDR VTT regulator. This allows the
+ regulator to be disabled upon suspend and enabled upon resume. Please note
+ that the GPIO pin must be part of the GPIO0 module as only this GPIO module
+ is in the wakeup power domain.
+
+ Support for IO Isolation
+ ========================
+ On AM437x SoCs, certain pins can be forced into an alternate state when IO
+ isolation is activated. Those pins have pad control registers prefixed by
+ 'CTRL_CONF_' that contain DS0 (e.g. deep sleep) configuration bits that can
+ override the pin's existing bias (pull-up/pull-down) and value (high/low) when
+ IO isolation is active.
+
+ Support for I2C PMIC Voltage Scaling
+ ====================================
+ It is possible to pass the name of a binary file to load into the CM3 memory.
+ The binary data is the I2C sequences for the CM3 to send out to the PMIC
+ during low power mode entry.
+
+properties:
+ compatible:
+ enum:
+ - ti,am3352-wkup-m3-ipc # for AM33xx SoCs
+ - ti,am4372-wkup-m3-ipc # for AM43xx SoCs
+
+ reg:
+ description:
+ The IPC register address space to communicate with the Wakeup M3 processor
+ maxItems: 1
+
+ interrupts:
+ description: wkup_m3 interrupt that signals the MPU
+ maxItems: 1
+
+ ti,rproc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the wkup_m3 rproc node so the IPC driver can boot it
+
+ mboxes:
+ description:
+ phandles used by IPC framework to get correct mbox
+ channel for communication. Must point to appropriate
+ mbox_wkupm3 child node.
+ maxItems: 1
+
+ firmware-name:
+ description:
+ Name of binary file with I2C sequences for PMIC voltage scaling
+
+ ti,vtt-gpio-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: GPIO pin connected to enable pin on VTT regulator
+
+ ti,set-io-isolation:
+ type: boolean
+ description:
+ If this property is present, then the wkup_m3_ipc driver will instruct
+ the CM3 firmware to activate IO isolation when suspending to deep sleep.
+ This can be leveraged by a board design to put other devices on the board
+ into a low power state.
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: ti,am4372-wkup-m3-ipc
+ then:
+ properties:
+ ti,set-io-isolation: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - ti,rproc
+ - mboxes
+
+additionalProperties: false
+
+examples:
+ - |
+ /* Example for AM335x SoC */
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ am335x_mailbox: mailbox {
+ #mbox-cells = <1>;
+ };
+
+ wkup_m3_ipc@1324 {
+ compatible = "ti,am3352-wkup-m3-ipc";
+ reg = <0x1324 0x24>;
+ interrupts = <78>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&am335x_mailbox &mbox_wkupm3>;
+ ti,vtt-gpio-pin = <7>;
+ firmware-name = "am335x-evm-scale-data.bin";
+ };
+ };
+
+ - |
+ /*
+ * Example for AM473x SoC:
+ * On the AM437x-GP-EVM board, gpio5_7 is wired to enable pin of the DDR VTT
+ * regulator. The 'ddr_vtt_toggle_default' pinmux node configures gpio5_7
+ * for pull-up during normal system operation. However, the DS0 (deep sleep)
+ * state of the pin is configured for pull-down and thus the VTT regulator
+ * will be disabled to save power when IO isolation is active. Note that
+ * this method is an alternative to using the 'ti,vtt-gpio-pin' property.
+ */
+ #include <dt-bindings/pinctrl/am43xx.h>
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ am437x_mailbox: mailbox {
+ #mbox-cells = <1>;
+ };
+
+ am43xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ddr3_vtt_toggle_default>;
+
+ ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
+ pinctrl-single,pins = <
+ 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7)
+ >;
+ };
+ };
+
+ wkup_m3_ipc@1324 {
+ compatible = "ti,am4372-wkup-m3-ipc";
+ reg = <0x1324 0x24>;
+ interrupts = <78>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&am437x_mailbox &mbox_wkupm3>;
+ ti,set-io-isolation;
+ firmware-name = "am43x-evm-scale-data.bin";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt
deleted file mode 100644
index 401550487ed6..000000000000
--- a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Wakeup M3 IPC Driver
-=====================
-
-The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
-(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
-that cannot be controlled from the MPU, like suspend/resume and certain deep
-C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver
-to boot the wkup_m3, it handles communication with the CM3 using IPC registers
-present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an
-API to allow the SoC PM code to execute specific PM tasks.
-
-Wkup M3 Device Node:
-====================
-A wkup_m3_ipc device node is used to represent the IPC registers within an
-SoC.
-
-Required properties:
---------------------
-- compatible: Should be,
- "ti,am3352-wkup-m3-ipc" for AM33xx SoCs
- "ti,am4372-wkup-m3-ipc" for AM43xx SoCs
-- reg: Contains the IPC register address space to communicate
- with the Wakeup M3 processor
-- interrupts: Contains the interrupt information for the wkup_m3
- interrupt that signals the MPU.
-- ti,rproc: phandle to the wkup_m3 rproc node so the IPC driver
- can boot it.
-- mboxes: phandles used by IPC framework to get correct mbox
- channel for communication. Must point to appropriate
- mbox_wkupm3 child node.
-
-Example:
---------
-/* AM33xx */
- l4_wkup: l4_wkup@44c00000 {
- ...
-
- scm: scm@210000 {
- compatible = "ti,am3-scm", "simple-bus";
- reg = <0x210000 0x2000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x210000 0x2000>;
-
- ...
-
- wkup_m3_ipc: wkup_m3_ipc@1324 {
- compatible = "ti,am3352-wkup-m3-ipc";
- reg = <0x1324 0x24>;
- interrupts = <78>;
- ti,rproc = <&wkup_m3>;
- mboxes = <&mailbox &mbox_wkupm3>;
- };
-
- ...
- };
- };
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
index 701449311fec..59f7c60a14ba 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
@@ -64,4 +64,3 @@ examples:
clock-frequency = <12288000>;
};
...
-
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index 8b5be4b92f35..b4b35edcb493 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -112,4 +112,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/sound/arm,pl041.yaml b/Documentation/devicetree/bindings/sound/arm,pl041.yaml
new file mode 100644
index 000000000000..7896b8150cf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/arm,pl041.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/arm,pl041.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL041 AACI sound interface
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm PrimeCell Advanced Audio CODEC Interface (AACI) is an AMBA compliant
+ peripheral that provides communication with an audio CODEC using the AC-link
+ protocol.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,pl041
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,pl041
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: APB register access clock
+
+ clock-names:
+ const: apb_pclk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ audio-controller@40000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
index f7e94b1e0e4b..7416067c945e 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
@@ -24,10 +24,13 @@ properties:
connection's sink, the second being the connection's source.
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
multi:
+ type: object
description: Multi-CPU/Codec node
dpcm:
+ type: object
description: DPCM node
codec2codec:
+ type: object
description: Codec to Codec node
required:
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
index d5474f83ac2c..e7e7bb65c366 100644
--- a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
+++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
@@ -20,9 +20,11 @@ properties:
description: User specified audio sound card name
audio-cpu:
+ $ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of an CPU DAI controller
hdmi-out:
+ type: boolean
description: |
This is a boolean property. If present, the transmitting function
of HDMI will be enabled, indicating there's a physical HDMI out
@@ -30,6 +32,7 @@ properties:
block, such as an HDMI encoder or display-controller.
hdmi-in:
+ type: boolean
description: |
This is a boolean property. If present, the receiving function of
HDMI will be enabled, indicating there is a physical HDMI in
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
index b6509cb2c8e0..3f88c7d61e34 100644
--- a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
+++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
@@ -33,4 +33,3 @@ examples:
reg = <0x38>;
};
};
-
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
index 4a2129005c0f..970311143253 100644
--- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
+++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
@@ -10,7 +10,7 @@ maintainers:
- Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
description:
- The Microchip Sony/Philips Digital Interface Receiver is a serial port
+ The Microchip Sony/Philips Digital Interface Receiver is a serial port
compliant with the IEC-60958 standard.
properties:
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
index bdfb63387c53..d5c022e49526 100644
--- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
+++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
@@ -10,7 +10,7 @@ maintainers:
- Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
description:
- The Microchip Sony/Philips Digital Interface Transmitter is a serial port
+ The Microchip Sony/Philips Digital Interface Transmitter is a serial port
compliant with the IEC-60958 standard.
properties:
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
index e768fb0e9a59..b1deaf271afa 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
@@ -82,4 +82,3 @@ examples:
clocks = <&clk 216>, <&clk 217>, <&clk 120>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
-
diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
index 97f83eeaf091..a01c4ad929b8 100644
--- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
@@ -149,4 +149,3 @@ examples:
sound-dai = <&wm8994>;
};
};
-
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
index db2513f3e168..7b4e08ddef6a 100644
--- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -92,4 +92,3 @@ examples:
sound-dai = <&hdmi>, <&max98090>;
};
};
-
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
index acd4bbe69731..5f7dd5d6cbca 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -76,4 +76,3 @@ examples:
ti,imon-slot-no = <0>;
};
};
-
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 027bebf4e8cf..bc90e72bf7cf 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -80,4 +80,3 @@ examples:
ti,vmon-slot-no = <2>;
};
};
-
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 4d46c49ec32b..50de0da42c13 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -95,4 +95,3 @@ examples:
reg = <0>;
};
};
-
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
index 54b6f15eca18..8a9d526d06eb 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
@@ -52,4 +52,3 @@ examples:
spi-max-frequency = <40000000>;
};
};
-
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 44d08aa3fd85..b622bb7363ec 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -8,8 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Qualcomm Quad Serial Peripheral Interface (QSPI)
maintainers:
- - Mukesh Savaliya <msavaliy@codeaurora.org>
- - Akash Asthana <akashast@codeaurora.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
description: The QSPI controller allows SPI protocol communication in single,
dual, or quad wire transmission modes for read/write access to slaves such
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
deleted file mode 100644
index 5c090771c016..000000000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
-
-The QUP core is an AHB slave that provides a common data path (an output FIFO
-and an input FIFO) for serial peripheral interface (SPI) mini-core.
-
-SPI in master mode supports up to 50MHz, up to four chip selects, programmable
-data path from 4 bits to 32 bits and numerous protocol variants.
-
-Required properties:
-- compatible: Should contain:
- "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064.
- "qcom,spi-qup-v2.1.1" for 8974 and later
- "qcom,spi-qup-v2.2.1" for 8974 v2 and later.
-
-- reg: Should contain base register location and length
-- interrupts: Interrupt number used by this controller
-
-- clocks: Should contain the core clock and the AHB clock.
-- clock-names: Should be "core" for the core clock and "iface" for the
- AHB clock.
-
-- #address-cells: Number of cells required to define a chip select
- address on the SPI bus. Should be set to 1.
-- #size-cells: Should be zero.
-
-Optional properties:
-- spi-max-frequency: Specifies maximum SPI clock frequency,
- Units - Hz. Definition as per
- Documentation/devicetree/bindings/spi/spi-bus.txt
-- num-cs: total number of chipselects
-- cs-gpios: should specify GPIOs used for chipselects.
- The gpios will be referred to as reg = <index> in the SPI child
- nodes. If unspecified, a single SPI device without a chip
- select can be used.
-
-- dmas: Two DMA channel specifiers following the convention outlined
- in bindings/dma/dma.txt
-- dma-names: Names for the dma channels, if present. There must be at
- least one channel named "tx" for transmit and named "rx" for
- receive.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
- spi_8: spi@f9964000 { /* BLSP2 QUP2 */
-
- compatible = "qcom,spi-qup-v2";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xf9964000 0x1000>;
- interrupts = <0 102 0>;
- spi-max-frequency = <19200000>;
-
- clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
-
- dmas = <&blsp1_bam 13>, <&blsp1_bam 12>;
- dma-names = "rx", "tx";
-
- pinctrl-names = "default";
- pinctrl-0 = <&spi8_default>;
-
- device@0 {
- compatible = "arm,pl022-dummy";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <19200000>;
- spi-cpol;
- };
-
- device@1 {
- compatible = "arm,pl022-dummy";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <1>; /* Chip select 1 */
- spi-max-frequency = <9600000>;
- spi-cpha;
- };
-
- device@2 {
- compatible = "arm,pl022-dummy";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <2>; /* Chip select 2 */
- spi-max-frequency = <19200000>;
- spi-cpol;
- spi-cpha;
- };
-
- device@3 {
- compatible = "arm,pl022-dummy";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <3>; /* Chip select 3 */
- spi-max-frequency = <19200000>;
- spi-cpol;
- spi-cpha;
- spi-cs-high;
- };
- };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
new file mode 100644
index 000000000000..93f14dd01afc
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ The QUP core is an AHB slave that provides a common data path (an output FIFO
+ and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+ SPI in master mode supports up to 50MHz, up to four chip selects,
+ programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064
+ - qcom,spi-qup-v2.1.1 # for 8974 and later
+ - qcom,spi-qup-v2.2.1 # for 8974 v2 and later
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: iface
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ spi@7575000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x07575000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_spi1_default>;
+ pinctrl-1 = <&blsp1_spi1_sleep>;
+ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
index c0eccf703039..bab5d4b7fc3d 100644
--- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -56,4 +56,3 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
};
-
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 200c7fc7b089..f012888656ec 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -78,7 +78,7 @@ spi0:spi@20bf0000 {
interrupts = <338>;
clocks = <&clkspi>;
- flash: n25q032@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32";
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index bda45ff3d294..0e382119c64f 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -143,7 +143,7 @@ examples:
<&dma_controller 24 0>;
dma-names = "rx", "tx";
- m25p80@1 {
+ flash@1 {
compatible = "st,m25p80";
reg = <1>;
spi-max-frequency = <12000000>;
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
deleted file mode 100644
index ca645e21fe47..000000000000
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Qualcomm SPMI Controller (PMIC Arbiter)
-
-The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
-controller with wrapping arbitration logic to allow for multiple on-chip
-devices to control a single SPMI master.
-
-The PMIC Arbiter can also act as an interrupt controller, providing interrupts
-to slave devices.
-
-See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
-controller binding requirements for child nodes.
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-generic interrupt controller binding documentation.
-
-Required properties:
-- compatible : should be "qcom,spmi-pmic-arb".
-- reg-names : must contain:
- "core" - core registers
- "intr" - interrupt controller registers
- "cnfg" - configuration registers
- Registers used only for V2 PMIC Arbiter:
- "chnls" - tx-channel per virtual slave registers.
- "obsrvr" - rx-channel (called observer) per virtual slave registers.
-
-- reg : address + size pairs describing the PMIC arb register sets; order must
- correspond with the order of entries in reg-names
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-- qcom,ee : indicates the active Execution Environment identifier (0-5)
-- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
-- interrupts : interrupt list for the PMIC Arb controller, must contain a
- single interrupt entry for the peripheral interrupt
-- interrupt-names : corresponding interrupt names for the interrupts
- listed in the 'interrupts' property, must contain:
- "periph_irq" - summary interrupt for PMIC peripherals
-- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
-- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple:
- cell 1: slave ID for the requested interrupt (0-15)
- cell 2: peripheral ID for requested interrupt (0-255)
- cell 3: the requested peripheral interrupt (0-7)
- cell 4: interrupt flags indicating level-sense information, as defined in
- dt-bindings/interrupt-controller/irq.h
-
-Example:
-
- spmi {
- compatible = "qcom,spmi-pmic-arb";
- reg-names = "core", "intr", "cnfg";
- reg = <0xfc4cf000 0x1000>,
- <0xfc4cb000 0x1000>,
- <0xfc4ca000 0x1000>;
-
- interrupt-names = "periph_irq";
- interrupts = <0 190 0>;
-
- qcom,ee = <0>;
- qcom,channel = <0>;
-
- #address-cells = <2>;
- #size-cells = <0>;
-
- interrupt-controller;
- #interrupt-cells = <4>;
- };
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 000000000000..fee4f0eb4665
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Controller (PMIC Arbiter)
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+ The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+ controller with wrapping arbitration logic to allow for multiple on-chip
+ devices to control a single SPMI master.
+
+ The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+ to slave devices.
+
+allOf:
+ - $ref: spmi.yaml
+
+properties:
+ compatible:
+ const: qcom,spmi-pmic-arb
+
+ reg:
+ oneOf:
+ - items: # V1
+ - description: core registers
+ - description: interrupt controller registers
+ - description: configuration registers
+ - items: # V2
+ - description: core registers
+ - description: tx-channel per virtual slave regosters
+ - description: rx-channel (called observer) per virtual slave registers
+ - description: interrupt controller registers
+ - description: configuration registers
+
+ reg-names:
+ oneOf:
+ - items:
+ - const: core
+ - const: intr
+ - const: cnfg
+ - items:
+ - const: core
+ - const: chnls
+ - const: obsrvr
+ - const: intr
+ - const: cnfg
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: periph_irq
+
+ interrupt-controller: true
+
+ '#address-cells': true
+
+ '#interrupt-cells':
+ const: 4
+ description: |
+ cell 1: slave ID for the requested interrupt (0-15)
+ cell 2: peripheral ID for requested interrupt (0-255)
+ cell 3: the requested peripheral interrupt (0-7)
+ cell 4: interrupt flags indicating level-sense information,
+ as defined in dt-bindings/interrupt-controller/irq.h
+
+ '#size-cells': true
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ indicates the active Execution Environment identifier
+
+ qcom,channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ which of the PMIC Arb provided channels to use for accesses
+
+required:
+ - compatible
+ - reg-names
+ - qcom,ee
+ - qcom,channel
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spmi@fc4cf000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+
+ interrupt-names = "periph_irq";
+ interrupts = <0 190 0>;
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index a24baf9b9f64..038d81338fcf 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -53,6 +53,7 @@ properties:
- qcom,sc8280xp-tsens
- qcom,sdm630-tsens
- qcom,sdm845-tsens
+ - qcom,sm6350-tsens
- qcom,sm8150-tsens
- qcom,sm8250-tsens
- qcom,sm8350-tsens
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
index c3386076a98c..7d821fd480f6 100644
--- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -17,7 +17,6 @@ properties:
maxItems: 1
interrupts:
- minItems: 3
maxItems: 3
description: |
A list of 3 interrupts; one per timer channel.
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
deleted file mode 100644
index 4db542c9a0fd..000000000000
--- a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-RDA Micro RDA8810PL Timer
-
-Required properties:
-- compatible : "rda,8810pl-timer"
-- reg : Offset and length of the register set for the device.
-- interrupts : Should contain two interrupts.
-- interrupt-names : Should be "hwtimer", "ostimer".
-
-Example:
-
- apb@20900000 {
- compatible = "simple-bus";
- ...
- timer@10000 {
- compatible = "rda,8810pl-timer";
- reg = <0x10000 0x1000>;
- interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
- <17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hwtimer", "ostimer";
- };
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
new file mode 100644
index 000000000000..f9043a4488d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/rda,8810pl-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL Timer
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+ compatible:
+ const: rda,8810pl-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: hwtimer
+ - const: ostimer
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@20910000 {
+ compatible = "rda,8810pl-timer";
+ reg = <0x20910000 0x1000>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
+ <17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hwtimer", "ostimer";
+ };
+...
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
index c399a019dde7..7207929e5cd6 100644
--- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -23,6 +23,7 @@ properties:
- enum:
- renesas,r7s72100-ostm # RZ/A1H
- renesas,r7s9210-ostm # RZ/A2M
+ - renesas,r9a07g043-ostm # RZ/G2UL
- renesas,r9a07g044-ostm # RZ/G2{L,LC}
- renesas,r9a07g054-ostm # RZ/V2L
- const: renesas,ostm # Generic
@@ -54,6 +55,7 @@ if:
compatible:
contains:
enum:
+ - renesas,r9a07g043-ostm
- renesas,r9a07g044-ostm
- renesas,r9a07g054-ostm
then:
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index f11cbc7ccc14..142b2cb4504e 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -24,13 +24,12 @@ properties:
- samsung,exynos4412-mct
clocks:
- minItems: 2
maxItems: 2
clock-names:
items:
- - pattern: "^(fin_pll|mct)$"
- - pattern: "^(fin_pll|mct)$"
+ - const: fin_pll
+ - const: mct
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml
new file mode 100644
index 000000000000..e32df21e63a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ti,timer-dm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI dual-mode timer
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+description: |
+ The TI dual-mode timer is a general purpose timer with PWM capabilities.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,am335x-timer
+ - ti,am335x-timer-1ms
+ - ti,am654-timer
+ - ti,dm814-timer
+ - ti,dm816-timer
+ - ti,omap2420-timer
+ - ti,omap3430-timer
+ - ti,omap4430-timer
+ - ti,omap5430-timer
+ - items:
+ - const: ti,am4372-timer
+ - const: ti,am335x-timer
+ - items:
+ - const: ti,am4372-timer-1ms
+ - const: ti,am335x-timer-1ms
+
+ reg:
+ items:
+ - description: IO address
+ - description: L3 to L4 mapping for omap4/5 L4 ABE
+ minItems: 1
+
+ clocks:
+ items:
+ - description: Functional clock
+ - description: System clock for omap4/5 and dra7
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: fck
+ - const: timer_sys_ck
+ minItems: 1
+
+ interrupts:
+ description:
+ Interrupt if available. The timer PWM features may be usable
+ in a limited way even without interrupts.
+ maxItems: 1
+
+ ti,timer-alwon:
+ description:
+ Timer is always enabled when the SoC is powered. Note that some SoCs like
+ am335x can suspend to PM coprocessor RTC only mode and in that case the
+ SoC power is cut including timers.
+ type: boolean
+
+ ti,timer-dsp:
+ description:
+ Timer is routable to the DSP in addition to the operating system.
+ type: boolean
+
+ ti,timer-pwm:
+ description:
+ Timer has been wired for PWM capability.
+ type: boolean
+
+ ti,timer-secure:
+ description:
+ Timer access has been limited to secure mode only.
+ type: boolean
+
+ ti,hwmods:
+ description:
+ Name of the HWMOD associated with timer. This is for legacy
+ omap2/3 platforms only.
+ $ref: /schemas/types.yaml#/definitions/string
+ deprecated: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: ti,am654-timer
+ then:
+ required:
+ - interrupts
+
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,omap3430-timer
+ - ti,omap4430-timer
+ - ti,omap5430-timer
+ then:
+ properties:
+ reg:
+ maxItems: 1
+ clocks:
+ maxItems: 1
+ clock-names:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,dm814-timer
+ - ti,dm816-timer
+ - ti,omap2420-timer
+ - ti,omap3430-timer
+ then:
+ properties:
+ ti,hwmods:
+ items:
+ - pattern: "^timer([1-9]|1[0-2])$"
+ else:
+ properties:
+ ti,hwmods: false
+
+examples:
+ - |
+ timer1: timer@0 {
+ compatible = "ti,am335x-timer-1ms";
+ reg = <0x0 0x400>;
+ interrupts = <67>;
+ ti,timer-alwon;
+ clocks = <&timer1_fck>;
+ clock-names = "fck";
+ };
+...
diff --git a/Documentation/devicetree/bindings/timer/ti,timer.txt b/Documentation/devicetree/bindings/timer/ti,timer.txt
deleted file mode 100644
index d02e27c764ec..000000000000
--- a/Documentation/devicetree/bindings/timer/ti,timer.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-OMAP Timer bindings
-
-Required properties:
-- compatible: Should be set to one of the below. Please note that
- OMAP44xx devices have timer instances that are 100%
- register compatible with OMAP3xxx devices as well as
- newer timers that are not 100% register compatible.
- So for OMAP44xx devices timer instances may use
- different compatible strings.
-
- ti,omap2420-timer (applicable to OMAP24xx devices)
- ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
- ti,omap4430-timer (applicable to OMAP44xx devices)
- ti,omap5430-timer (applicable to OMAP543x devices)
- ti,am335x-timer (applicable to AM335x devices)
- ti,am335x-timer-1ms (applicable to AM335x devices)
-
-- reg: Contains timer register address range (base address and
- length).
-- interrupts: Contains the interrupt information for the timer. The
- format is being dependent on which interrupt controller
- the OMAP device uses.
-- ti,hwmods: Name of the hwmod associated to the timer, "timer<X>",
- where <X> is the instance number of the timer from the
- HW spec.
-
-Optional properties:
-- ti,timer-alwon: Indicates the timer is in an alway-on power domain.
-- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in
- addition to the ARM CPU.
-- ti,timer-pwm: Indicates the timer can generate a PWM output.
-- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device
- and therefore cannot be used by the kernel.
-
-Example:
-
-timer12: timer@48304000 {
- compatible = "ti,omap3430-timer";
- reg = <0x48304000 0x400>;
- interrupts = <95>;
- ti,hwmods = "timer12"
- ti,timer-alwon;
- ti,timer-secure;
-};
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index c11520347a9d..05f01f4acca8 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -87,6 +87,8 @@ properties:
- devantech,srf08
# Devantech SRF10 ultrasonic ranger
- devantech,srf10
+ # DH electronics GmbH on-board CPLD trivial SPI device
+ - dh,dhcom-board
# DA9053: flexible system level PMIC with multicore support
- dlg,da9053
# DA9063: system PMIC for quad-core application processors
@@ -219,6 +221,8 @@ properties:
- memsic,mxc6255
# MEMSIC 3-axis accelerometer
- memsic,mxc6655
+ # Menlo on-board CPLD trivial SPI device
+ - menlo,m53cpld
# Microchip differential I2C ADC, 1 Channel, 18 bit
- microchip,mcp3421
# Microchip differential I2C ADC, 2 Channel, 18 bit
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index a5c5db6a0b2d..ba51fb1252b9 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -151,7 +151,7 @@ Example for HSIC:
#address-cells = <1>;
#size-cells = <0>;
- usbnet: smsc@1 {
+ usbnet: ethernet@1 {
compatible = "usb424,9730";
reg = <1>;
};
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 4cebce682d16..17fc471a12bd 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -139,12 +139,12 @@ properties:
snps,need-phy-for-wake:
$ref: /schemas/types.yaml#/definitions/flag
- description: If present indicates that the phy needs to be left on for
+ description: If present indicates that the phy needs to be left on for
remote wakeup during suspend.
snps,reset-phy-on-wake:
$ref: /schemas/types.yaml#/definitions/flag
- description: If present indicates that we need to reset the PHY when we
+ description: If present indicates that we need to reset the PHY when we
detect a wakeup. This is due to a hardware errata.
port:
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
index 1e8e1c22180e..8db1f8b597c3 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
@@ -50,6 +50,11 @@ examples:
mt6360@34 {
compatible = "mediatek,mt6360";
reg = <0x34>;
+ interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "IRQB";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
tcpc {
compatible = "mediatek,mt6360-tcpc";
interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
index 39228a506b93..321b6f166197 100644
--- a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
+++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
@@ -45,6 +45,7 @@ properties:
property if all ports have to be enabled.
initial-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2]
description: >
Specifies initial mode. 1 for Hub mode, 2 for standby mode.
@@ -77,7 +78,7 @@ examples:
i2c {
#address-cells = <1>;
#size-cells = <0>;
-
+
usb-hub@8 {
compatible = "smsc,usb3503";
reg = <0x08>;
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 2bf2b3accc8e..158159c18a86 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -385,6 +385,8 @@ patternProperties:
description: Empire Electronix
"^emtrion,.*":
description: emtrion GmbH
+ "^enclustra,.*":
+ description: Enclustra GmbH
"^endless,.*":
description: Endless Mobile, Inc.
"^ene,.*":
diff --git a/Documentation/devicetree/bindings/writing-bindings.rst b/Documentation/devicetree/bindings/writing-bindings.rst
index 18d9e0689d49..5465eced2af1 100644
--- a/Documentation/devicetree/bindings/writing-bindings.rst
+++ b/Documentation/devicetree/bindings/writing-bindings.rst
@@ -58,6 +58,31 @@ Properties
- DO define properties in terms of constraints. How many entries? What are
possible values? What is the order?
+Typical cases and caveats
+=========================
+
+- Phandle entries, like clocks/dmas/interrupts/resets, should always be
+ explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is
+ more than one phandle. When used, both of these fields need the same
+ constraints (e.g. list of items).
+
+- For names used in {clock,dma,interrupt,reset}-names, do not add any suffix,
+ e.g.: "tx" instead of "txirq" (for interrupt).
+
+- Properties without schema types (e.g. without standard suffix or not defined
+ by schema) need the type, even if this is an enum.
+
+- If schema includes other schema (e.g. /schemas/i2c/i2c-controller.yaml) use
+ "unevaluatedProperties:false". In other cases, usually use
+ "additionalProperties:false".
+
+- For sub-blocks/components of bigger device (e.g. SoC blocks) use rather
+ device-based compatible (e.g. SoC-based compatible), instead of custom
+ versioning of that component.
+ For example use "vendor,soc1234-i2c" instead of "vendor,i2c-v2".
+
+- "syscon" is not a generic property. Use vendor and type, e.g.
+ "vendor,power-manager-syscon".
Board/SoC .dts Files
====================
diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst
index 95ecf55559e5..4a381d20f2b4 100644
--- a/Documentation/devicetree/bindings/writing-schema.rst
+++ b/Documentation/devicetree/bindings/writing-schema.rst
@@ -108,6 +108,12 @@ The YAML Devicetree format also makes all string values an array and scalar
values a matrix (in order to define groupings) even when only a single value
is present. Single entries in schemas are fixed up to match this encoding.
+Coding style
+------------
+
+Use YAML coding style (two-space indentation). For DTS examples in the schema,
+preferred is four-space indentation.
+
Testing
-------
@@ -128,6 +134,8 @@ installed first. On Debian/Ubuntu systems::
Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be
installed. Ensure they are in your PATH (~/.local/bin by default).
+Recommended is also to install yamllint (used by dtschema when present).
+
Running checks
~~~~~~~~~~~~~~
diff --git a/Documentation/devicetree/overlay-notes.rst b/Documentation/devicetree/overlay-notes.rst
index b2b8db765b8c..e139f22b363e 100644
--- a/Documentation/devicetree/overlay-notes.rst
+++ b/Documentation/devicetree/overlay-notes.rst
@@ -119,10 +119,32 @@ Finally, if you need to remove all overlays in one-go, just call
of_overlay_remove_all() which will remove every single one in the correct
order.
-In addition, there is the option to register notifiers that get called on
+There is the option to register notifiers that get called on
overlay operations. See of_overlay_notifier_register/unregister and
enum of_overlay_notify_action for details.
-Note that a notifier callback is not supposed to store pointers to a device
-tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
-respective node it received.
+A notifier callback for OF_OVERLAY_PRE_APPLY, OF_OVERLAY_POST_APPLY, or
+OF_OVERLAY_PRE_REMOVE may store pointers to a device tree node in the overlay
+or its content but these pointers must not persist past the notifier callback
+for OF_OVERLAY_POST_REMOVE. The memory containing the overlay will be
+kfree()ed after OF_OVERLAY_POST_REMOVE notifiers are called. Note that the
+memory will be kfree()ed even if the notifier for OF_OVERLAY_POST_REMOVE
+returns an error.
+
+The changeset notifiers in drivers/of/dynamic.c are a second type of notifier
+that could be triggered by applying or removing an overlay. These notifiers
+are not allowed to store pointers to a device tree node in the overlay
+or its content. The overlay code does not protect against such pointers
+remaining active when the memory containing the overlay is freed as a result
+of removing the overlay.
+
+Any other code that retains a pointer to the overlay nodes or data is
+considered to be a bug because after removing the overlay the pointer
+will refer to freed memory.
+
+Users of overlays must be especially aware of the overall operations that
+occur on the system to ensure that other kernel code does not retain any
+pointers to the overlay nodes or data. Any example of an inadvertent use
+of such pointers is if a driver or subsystem module is loaded after an
+overlay has been applied, and the driver or subsystem scans the entire
+devicetree or a large portion of it, including the overlay nodes.