Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "This time there are lots of changes. Quite a few changes to the core,
  lots of driver changes and one change to kobject core (with Ack from
  Greg).

  Summary:

  kobject:
   - Increase number of allowed uevent variables

  power-supply core:
   - Add power-supply type in uevent
   - Cleanup property handling in core
   - Make property and usb_type pointers const
   - Convert core power-supply DT binding to YAML
   - Cleanup HWMON code
   - Add new health status "calibration required"
   - Add new properties for manufacture date and capacity error margin

  battery drivers:
   - new cw2015 battery driver used by pine64 Pinebook Pro laptop
   - axp22: blacklist on Meegopad T02
   - sc27xx: support current/voltage reading
   - max17042: support time-to-empty reading
   - simple-battery: add more battery parameters
   - bq27xxx: convert DT binding document to YAML
   - sbs-battery: add TI BQ20Z65 support, fix technology property,
         convert DT binding to YAML, add option to disable charger
         broadcasts, add new properties: manufacture date, capacity
         error margin, average current, charge current and voltage and
         support calibration required health status
   - misc fixes

  charger drivers:
   - bq25890: cleanup, implement charge type, precharge current and
         input current limiting properties
   - bd70528: use new linear range helper library
   - bd99954: new charger driver
   - mp2629: new charger driver
   - misc fixes

  reboot drivers:
   - oxnas-restart: introduce new driver
   - syscon-reboot: convert DT binding to YAML, add parent syscon device
         support
   - misc fixes"

* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
  power: supply: cw2015: Attach OF ID table to the driver
  power: reset: gpio-poweroff: add missing '\n' in dev_err()
  Revert "power: supply: sbs-battery: simplify read_read_string_data"
  Revert "power: supply: sbs-battery: add PEC support"
  dt-bindings: power: sbs-battery: Convert to yaml
  power: supply: sbs-battery: constify power-supply property array
  power: supply: sbs-battery: switch to i2c's probe_new
  power: supply: sbs-battery: switch from of_property_* to device_property_*
  power: supply: sbs-battery: add ability to disable charger broadcasts
  power: supply: sbs-battery: fix idle battery status
  power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
  power: supply: sbs-battery: add MANUFACTURE_DATE support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
  power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
  power: supply: sbs-battery: add PEC support
  power: supply: sbs-battery: simplify read_read_string_data
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
  power: supply: sbs-battery: Add TI BQ20Z65 support
  power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
  ...

13 files changed, 526 insertions, 146 deletions

diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
deleted file mode 100644
index f7ce1d8af04a..000000000000
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-SYSCON reboot mode driver
-
-This driver gets reboot mode magic value form reboot-mode driver
-and stores it in a SYSCON mapped register. Then the bootloader
-can read it and take different action according to the magic
-value stored.
-
-This DT node should be represented as a sub-node of a "syscon", "simple-mfd"
-node.
-
-Required properties:
-- compatible: should be "syscon-reboot-mode"
-- offset: offset in the register map for the storage register (in bytes)
-
-Optional property:
-- mask: bits mask of the bits in the register to store the reboot mode magic value,
-  default set to 0xffffffff if missing.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-	pmu: pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
-		reg = <0x20004000 0x100>;
-
-		reboot-mode {
-			compatible = "syscon-reboot-mode";
-			offset = <0x40>;
-			mode-normal = <BOOT_NORMAL>;
-			mode-recovery = <BOOT_RECOVERY>;
-			mode-bootloader = <BOOT_FASTBOOT>;
-			mode-loader = <BOOT_BL_DOWNLOAD>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
new file mode 100644
index 000000000000..9b1ffceefe3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON reboot mode driver
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  This driver gets reboot mode magic value from reboot-mode driver
+  and stores it in a SYSCON mapped register. Then the bootloader
+  can read it and take different action according to the magic
+  value stored. The SYSCON mapped register is retrieved from the
+  parental dt-node plus the offset. So the SYSCON reboot-mode node
+  should be represented as a sub-node of a "syscon", "simple-mfd" node.
+
+properties:
+  compatible:
+    const: syscon-reboot-mode
+
+  mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Update only the register bits defined by the mask (32 bit)
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the mode register (in bytes)
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+additionalProperties: false
+
+required:
+  - compatible
+  - offset
+
+examples:
+  - |
+    #include <dt-bindings/soc/rockchip,boot-mode.h>
+
+    reboot-mode {
+      compatible = "syscon-reboot-mode";
+      offset = <0x40>;
+      mode-normal = <BOOT_NORMAL>;
+      mode-recovery = <BOOT_RECOVERY>;
+      mode-bootloader = <BOOT_FASTBOOT>;
+      mode-loader = <BOOT_BL_DOWNLOAD>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index b80772cb9f06..da2509724812 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -12,9 +12,12 @@ maintainers:
 description: |+
   This is a generic reset driver using syscon to map the reset register.
   The reset is generally performed with a write to the reset register
-  defined by the register map pointed by syscon reference plus the offset
-  with the value and mask defined in the reboot node.
-  Default will be little endian mode, 32 bit access only.
+  defined by the SYSCON register map base plus the offset with the value and
+  mask defined in the reboot node. Default will be little endian mode, 32 bit
+  access only. The SYSCON registers map is normally retrieved from the
+  parental dt-node. So the SYSCON reboot node should be represented as a
+  sub-node of a "syscon", "simple-mfd" node. Though the regmap property
+  pointing to the system controller node is also supported.
 
 properties:
   compatible:
@@ -30,7 +33,10 @@ properties:
 
   regmap:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: Phandle to the register map node.
+    deprecated: true
+    description: |
+      Phandle to the register map node. This property is deprecated in favor of
+      the syscon-reboot node been a child of a system controller node.
 
   value:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -38,7 +44,6 @@ properties:
 
 required:
   - compatible
-  - regmap
   - offset
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt
index 3049cf88bdcf..5e29595edd74 100644
--- a/Documentation/devicetree/bindings/power/supply/battery.txt
+++ b/Documentation/devicetree/bindings/power/supply/battery.txt
@@ -11,15 +11,21 @@ different type. This prevents unpredictable, potentially harmful,
 behavior should a replacement that changes the battery type occur
 without a corresponding update to the dtb.
 
+Please note that not all charger drivers respect all of the properties.
+
 Required Properties:
  - compatible: Must be "simple-battery"
 
 Optional Properties:
+ - over-voltage-threshold-microvolt: battery over-voltage limit
+ - re-charge-voltage-microvolt: limit to automatically start charging again
  - voltage-min-design-microvolt: drained battery voltage
  - voltage-max-design-microvolt: fully charged battery voltage
  - energy-full-design-microwatt-hours: battery design energy
  - charge-full-design-microamp-hours: battery design capacity
+ - trickle-charge-current-microamp: current for trickle-charge phase
  - precharge-current-microamp: current for pre-charge phase
+ - precharge-upper-limit-microvolt: limit when to change to constant charging
  - charge-term-current-microamp: current for charge termination phase
  - constant-charge-current-max-microamp: maximum constant input current
  - constant-charge-voltage-max-microvolt: maximum constant input voltage
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
deleted file mode 100644
index 4fa8e08df2b6..000000000000
--- a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-TI BQ27XXX fuel gauge family
-
-Required properties:
-- compatible: contains one of the following:
- * "ti,bq27200" - BQ27200
- * "ti,bq27210" - BQ27210
- * "ti,bq27500" - deprecated, use revision specific property below
- * "ti,bq27510" - deprecated, use revision specific property below
- * "ti,bq27520" - deprecated, use revision specific property below
- * "ti,bq27500-1" - BQ27500/1
- * "ti,bq27510g1" - BQ27510-g1
- * "ti,bq27510g2" - BQ27510-g2
- * "ti,bq27510g3" - BQ27510-g3
- * "ti,bq27520g1" - BQ27520-g1
- * "ti,bq27520g2" - BQ27520-g2
- * "ti,bq27520g3" - BQ27520-g3
- * "ti,bq27520g4" - BQ27520-g4
- * "ti,bq27521" - BQ27521
- * "ti,bq27530" - BQ27530
- * "ti,bq27531" - BQ27531
- * "ti,bq27541" - BQ27541
- * "ti,bq27542" - BQ27542
- * "ti,bq27546" - BQ27546
- * "ti,bq27742" - BQ27742
- * "ti,bq27545" - BQ27545
- * "ti,bq27411" - BQ27411
- * "ti,bq27421" - BQ27421
- * "ti,bq27425" - BQ27425
- * "ti,bq27426" - BQ27426
- * "ti,bq27441" - BQ27441
- * "ti,bq27621" - BQ27621
-- reg: integer, I2C address of the fuel gauge.
-
-Optional properties:
-- monitored-battery: phandle of battery characteristics node
-    The fuel gauge uses the following battery properties:
-    + energy-full-design-microwatt-hours
-    + charge-full-design-microamp-hours
-    + voltage-min-design-microvolt
-  Both or neither of the *-full-design-*-hours properties must be set.
-  See Documentation/devicetree/bindings/power/supply/battery.txt
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3200000>;
-		energy-full-design-microwatt-hours = <5290000>;
-		charge-full-design-microamp-hours = <1430000>;
-	};
-
-	bq27510g3: fuel-gauge@55 {
-		compatible = "ti,bq27510g3";
-		reg = <0x55>;
-		monitored-battery = <&bat>;
-	};
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
new file mode 100644
index 000000000000..03d1020a2e47
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq27xxx.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI BQ27XXX fuel gauge family
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Andrew F. Davis <afd@ti.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Support various Texas Instruments fuel gauge devices that share similar
+  register maps and power supply properties
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq27200
+      - ti,bq27210
+      - ti,bq27500 # deprecated, use revision specific property below
+      - ti,bq27510 # deprecated, use revision specific property below
+      - ti,bq27520 # deprecated, use revision specific property below
+      - ti,bq27500-1
+      - ti,bq27510g1
+      - ti,bq27510g2
+      - ti,bq27510g3
+      - ti,bq27520g1
+      - ti,bq27520g2
+      - ti,bq27520g3
+      - ti,bq27520g4
+      - ti,bq27521
+      - ti,bq27530
+      - ti,bq27531
+      - ti,bq27541
+      - ti,bq27542
+      - ti,bq27546
+      - ti,bq27742
+      - ti,bq27545
+      - ti,bq27411
+      - ti,bq27421
+      - ti,bq27425
+      - ti,bq27426
+      - ti,bq27441
+      - ti,bq27621
+
+  reg:
+    maxItems: 1
+    description: integer, I2C address of the fuel gauge.
+
+  monitored-battery:
+    description: |
+       phandle of battery characteristics node.
+       The fuel gauge uses the following battery properties:
+       - energy-full-design-microwatt-hours
+       - charge-full-design-microamp-hours
+       - voltage-min-design-microvolt
+       Both or neither of the *-full-design-*-hours properties must be set.
+       See Documentation/devicetree/bindings/power/supply/battery.txt
+
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      bat: battery {
+        compatible = "simple-battery";
+        voltage-min-design-microvolt = <3200000>;
+        energy-full-design-microwatt-hours = <5290000>;
+        charge-full-design-microamp-hours = <1430000>;
+      };
+
+      bq27510g3: fuel-gauge@55 {
+        compatible = "ti,bq27510g3";
+        reg = <0x55>;
+        monitored-battery = <&bat>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
new file mode 100644
index 000000000000..4a265d4234b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery driver for CW2015 shuntless fuel gauge by CellWise.
+
+maintainers:
+  - Tobias Schramm <t.schramm@manjaro.org>
+
+description: |
+  The driver can utilize information from a simple-battery linked via a
+  phandle in monitored-battery. If specified the driver uses the
+  charge-full-design-microamp-hours property of the battery.
+
+properties:
+  compatible:
+    const: cellwise,cw2015
+
+  reg:
+    maxItems: 1
+
+  cellwise,battery-profile:
+    description: |
+      This property specifies characteristics of the battery used. The format
+      of this binary blob is kept secret by CellWise. The only way to obtain
+      it is to mail two batteries to a test facility of CellWise and receive
+      back a test report with the binary blob.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint8-array
+    items:
+      - minItems: 64
+        maxItems: 64
+
+  cellwise,monitor-interval-ms:
+    description:
+      Specifies the interval in milliseconds gauge values are polled at
+    minimum: 250
+
+  power-supplies:
+    description:
+      Specifies supplies used for charging the battery connected to this gauge
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - minItems: 1
+        maxItems: 8 # Should be enough
+
+  monitored-battery:
+    description:
+      Specifies the phandle of a simple-battery connected to this gauge
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cw2015@62 {
+            compatible = "cellwise,cw201x";
+            reg = <0x62>;
+            cellwise,battery-profile = /bits/ 8 <
+                0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+                0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+                0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+                0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+                0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+                0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+                0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+                0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+           >;
+           cellwise,monitor-interval-ms = <5000>;
+           monitored-battery = <&bat>;
+           power-supplies = <&mains_charger>, <&usb_charger>;
+       };
+    };
+
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
new file mode 100644
index 000000000000..3bb02bb3a2d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/power-supply.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Power Supply Core Support
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  power-supplies:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      This property is added to a supply in order to list the devices which
+      supply it power, referenced by their phandles.
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usb_charger:charger@e {
+        compatible = "some,usb-charger";
+        reg = <0xe>;
+      };
+
+      ac_charger:charger@c {
+        compatible = "some,ac-charger";
+        reg = <0xc>;
+      };
+
+      battery:battery@b {
+        compatible = "some,battery";
+        reg = <0xb>;
+        power-supplies = <&usb_charger>, <&ac_charger>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/power_supply.txt b/Documentation/devicetree/bindings/power/supply/power_supply.txt
index 8391bfa0edac..d9693e054509 100644
--- a/Documentation/devicetree/bindings/power/supply/power_supply.txt
+++ b/Documentation/devicetree/bindings/power/supply/power_supply.txt
@@ -1,23 +1,2 @@
-Power Supply Core Support
-
-Optional Properties:
- - power-supplies : This property is added to a supply in order to list the
-   devices which supply it power, referenced by their phandles.
-
-Example:
-
-	usb-charger: power@e {
-		compatible = "some,usb-charger";
-		...
-	};
-
-	ac-charger: power@c {
-		compatible = "some,ac-charger";
-		...
-	};
-
-	battery@b {
-		compatible = "some,battery";
-		...
-		power-supplies = <&usb-charger>, <&ac-charger>;
-	};
+This binding has been converted to yaml please see power-supply.yaml in this
+directory.
diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
new file mode 100644
index 000000000000..7e0f73a898c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Markus Laine <markus.laine@fi.rohmeurope.com>
+  - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+
+description: |
+  The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+  secondary battery intended to be used in space-constraint equipment such
+  as Low profile Notebook PC, Tablets and other applications. BD99954
+  provides a Dual-source Battery Charger, two port BC1.2 detection and a
+  Battery Monitor.
+
+
+properties:
+  compatible:
+    const: rohm,bd99954
+#
+#    The battery charging profile of BD99954.
+#
+#    Curve (1) represents charging current.
+#    Curve (2) represents battery voltage.
+#
+#    The BD99954 data sheet divides charging to three phases.
+#    a) Trickle-charge with constant current (8).
+#    b) pre-charge with constant current (6)
+#    c) fast-charge with:
+#       First a constant current (5) phase (CC)
+#       Then constant voltage (CV) phase (after the battery voltage has reached
+#       target level - until charging current has dropped to termination
+#       level (7)
+#
+#     V ^                                                        ^ I
+#       .                                                        .
+#       .                                                        .
+# (4)- -.- - - - - - - - - - - - - -  +++++++++++++++++++++++++++.
+#       .                            /                           .
+#       .                     ++++++/++ - - - - - - - - - - - - -.- - (5)
+#       .                     +    /  +                          .
+#       .                     +   -   --                         .
+#       .                     +  -     +                         .
+#       .                     +.-      -:                        .
+#       .                    .+         +`                       .
+#       .                  .- +       | `/                       .
+#       .               .."   +          .:                      .
+#       .             -"      +           --                     .
+#       .    (2)  ..."        +       |    :-                    .
+#       .    ...""            +             -:                   .
+# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
+#       .             +                       `:.                .
+#       .             +               |         -:               .
+#       .             +                           -:             .
+#       .             +                             ..           .
+#       .   (1)       +               |               "+++- - - -.- - (7)
+#       -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
+#       .                                                +       -
+#       -------------------------------------------------+++++++++-->
+#       |             |       |   CC   |      CV         |
+#       | --trickle-- | -pre- | ---------fast----------- |
+#
+#   The charger uses the following battery properties
+# - trickle-charge-current-microamp:
+#     Current used at trickle-charge phase (8 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - precharge-current-microamp:
+#     Current used at pre-charge phase (6 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-current-max-microamp
+#     Current used at fast charge constant current phase (5 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-voltage-max-microvolt
+#     The constant voltage used in fast charging phase (4 in above chart)
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - precharge-upper-limit-microvolt
+#     charging mode is changed from trickle charging to pre-charging
+#     when battery voltage exceeds this limit voltage (3 in above chart)
+#     minimum: 2048000
+#     maximum: 19200000
+#     multipleOf: 64000
+# - re-charge-voltage-microvolt
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+#     re-charging is automatically started when battry has been discharging
+#     to the point where the battery voltage drops below this limit
+# - over-voltage-threshold-microvolt
+#     battery is expected to be faulty if battery voltage exceeds this limit.
+#     Charger will then enter to a "battery faulty" -state
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - charge-term-current-microamp
+#     minimum: 0
+#     maximum: 1024000
+#     multipleOf: 64000
+#     a charge cycle terminates when the battery voltage is above recharge
+#     threshold, and the current is below this setting (7 in above chart)
+#   See also Documentation/devicetree/bindings/power/supply/battery.txt
+
+  monitored-battery:
+    description:
+      phandle of battery characteristics devicetree node
+
+  rohm,vsys-regulation-microvolt:
+    description: system specific lower limit for system voltage.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 64000
+
+  rohm,vbus-input-current-limit-microamp:
+    description: system specific VBUS input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+  rohm,vcc-input-current-limit-microamp:
+    description: system specific VCC/VACP input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+required:
+  - compatible
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        charger@9 {
+            compatible = "rohm,bd99954";
+            monitored-battery = <&battery>;
+            reg = <0x9>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 8>;
+            rohm,vsys-regulation-microvolt = <8960000>;
+            rohm,vbus-input-current-limit-microamp = <1472000>;
+            rohm,vcc-input-current-limit-microamp = <1472000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
new file mode 100644
index 000000000000..205bc826bd20
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Battery compatible with the smart battery system specifications
+
+properties:
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,bq20z65
+              - ti,bq20z75
+          - enum:
+              - sbs,sbs-battery
+      - items:
+          - const: sbs,sbs-battery
+
+  reg:
+    maxItems: 1
+
+  sbs,i2c-retry-count:
+    description:
+      The number of times to retry I2C transactions on I2C IO failure.
+    default: 0
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,poll-retry-count:
+    description:
+      The number of times to try looking for new status after an external
+      change notification.
+    default: 0
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,battery-detect-gpios:
+    description:
+      GPIO which signals battery detection. If this is not supplied, the bus
+      needs to be polled to detect the battery.
+    maxItems: 1
+
+  sbs,disable-charger-broadcasts:
+    description:
+      SBS batteries by default send broadcast messages to SBS compliant chargers to
+      configure max. charge current/voltage. If your hardware does not have an SBS
+      compliant charger it should be disabled via this property to avoid blocking
+      the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
+      master implementation.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        battery@b {
+            compatible = "ti,bq20z75", "sbs,sbs-battery";
+            reg = <0xb>;
+            sbs,i2c-retry-count = <2>;
+            sbs,poll-retry-count = <10>;
+            sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
+            sbs,disable-charger-broadcasts;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
deleted file mode 100644
index 4e78e51018eb..000000000000
--- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-SBS sbs-battery
-~~~~~~~~~~
-
-Required properties :
- - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
-     part number compatible string might be used in order to take care of
-     vendor specific registers.
-     Known <vendor>,<part-number>:
-       ti,bq20z75
-
-Optional properties :
- - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
-   IO failure.
- - sbs,poll-retry-count : The number of times to try looking for new status
-   after an external change notification.
- - sbs,battery-detect-gpios : The gpio which signals battery detection and
-   a flag specifying its polarity.
-
-Example:
-
-	battery@b {
-		compatible = "ti,bq20z75", "sbs,sbs-battery";
-		reg = <0xb>;
-		sbs,i2c-retry-count = <2>;
-		sbs,poll-retry-count = <10>;
-		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
-	}
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ef6d75b9113a..9aeab66be85f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -187,6 +187,8 @@ patternProperties:
     description: Cadence Design Systems Inc.
   "^cdtech,.*":
     description: CDTech(H.K.) Electronics Limited
+  "^cellwise,.*":
+    description: CellWise Microelectronics Co., Ltd
   "^ceva,.*":
     description: Ceva, Inc.
   "^checkpoint,.*":