Merge tag 'fbdev-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev

Pull fbdev updates from Helge Deller:
 "The most relevant change are the patches from Dmitry Torokhov to
  switch omapfb to the gpiod API.

  The other patches are small and fix e.g. UML build issues, improve the
  error paths and cleanup code"

* tag 'fbdev-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (32 commits)
  fbdev: fbcon: release buffer when fbcon_do_set_font() failed
  fbdev: sh_mobile_lcdcfb: use sysfs_emit() to instead of scnprintf()
  fbdev: uvesafb: use sysfs_emit() to instead of scnprintf()
  fbdev: uvesafb: Simplify uvesafb_remove()
  fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
  fbdev: uvesafb: don't build on UML
  fbdev: geode: don't build on UML
  fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()
  fbdev: matroxfb: Convert to i2c's .probe_new()
  fbdev: da8xx-fb: add missing regulator_disable() in fb_probe
  fbdev: controlfb: fix spelling mistake "paramaters"->"parameters"
  fbdev: vermilion: decrease reference count in error path
  fbdev: smscufx: fix error handling code in ufx_usb_probe
  fbdev: via: Fix error in via_core_init()
  fbdev: pm2fb: fix missing pci_disable_device()
  fbdev: pxafb: Remove unnecessary print function dev_err()
  fbdev: omapfb: panel-sharp-ls037v7dw01: fix included headers
  fbdev: omapfb: panel-tpo-td028ttec1: stop including gpio.h
  fbdev: omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling
  fbdev: omapfb: encoder-opa362: fix included headers
  ...

29 files changed, 261 insertions, 604 deletions

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 71019b167f8b..df6e09f7d242 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -609,6 +609,7 @@ config FB_TGA
 config FB_UVESA
 	tristate "Userspace VESA VGA graphics support"
 	depends on FB && CONNECTOR
+	depends on !UML
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -2254,7 +2255,6 @@ config FB_SSD1307
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
 	select FB_DEFERRED_IO
-	select PWM
 	select FB_BACKLIGHT
 	help
 	  This driver implements support for the Solomon SSD1307
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 6bbcd9fc864e..77dbf94aae5f 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -376,7 +376,7 @@ static int read_control_sense(struct fb_info_control *p)
 #define CONTROL_PIXCLOCK_MIN	5000	/* ~ 200 MHz dot clock */
 
 /*
- * calculate the clock paramaters to be sent to CUDA according to given
+ * calculate the clock parameters to be sent to CUDA according to given
  * pixclock in pico second.
  */
 static int calc_clock_params(unsigned long clk, unsigned char *param)
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index c0143d38df83..14a7d404062c 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2450,7 +2450,8 @@ err_out:
 
 	if (userfont) {
 		p->userfont = old_userfont;
-		REFCOUNT(data)--;
+		if (--REFCOUNT(data) == 0)
+			kfree(data - FONT_EXTRA_WORDS * sizeof(int));
 	}
 
 	vc->vc_font.width = old_width;
diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
index 11922b009ed7..cd07e401b326 100644
--- a/drivers/video/fbdev/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -1431,7 +1431,7 @@ static int fb_probe(struct platform_device *device)
 		dev_err(&device->dev,
 			"GLCD: kmalloc for frame buffer failed\n");
 		ret = -EINVAL;
-		goto err_release_fb;
+		goto err_disable_reg;
 	}
 
 	da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt;
@@ -1475,7 +1475,7 @@ static int fb_probe(struct platform_device *device)
 
 	ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
 	if (ret)
-		goto err_release_fb;
+		goto err_disable_reg;
 	da8xx_fb_info->cmap.len = par->palette_sz;
 
 	/* initialize var_screeninfo */
@@ -1529,6 +1529,9 @@ err_cpu_freq:
 err_dealloc_cmap:
 	fb_dealloc_cmap(&da8xx_fb_info->cmap);
 
+err_disable_reg:
+	if (par->lcd_supply)
+		regulator_disable(par->lcd_supply);
 err_release_fb:
 	framebuffer_release(da8xx_fb_info);
 
diff --git a/drivers/video/fbdev/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
index 2398b3d48fed..305f1587bd89 100644
--- a/drivers/video/fbdev/ep93xx-fb.c
+++ b/drivers/video/fbdev/ep93xx-fb.c
@@ -552,12 +552,14 @@ static int ep93xxfb_probe(struct platform_device *pdev)
 
 	err = register_framebuffer(info);
 	if (err)
-		goto failed_check;
+		goto failed_framebuffer;
 
 	dev_info(info->dev, "registered. Mode = %dx%d-%d\n",
 		 info->var.xres, info->var.yres, info->var.bits_per_pixel);
 	return 0;
 
+failed_framebuffer:
+	clk_disable_unprepare(fbi->clk);
 failed_check:
 	if (fbi->mach_info->teardown)
 		fbi->mach_info->teardown(pdev);
diff --git a/drivers/video/fbdev/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
index 2f8f0fb1dae2..b184085a78c2 100644
--- a/drivers/video/fbdev/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
@@ -5,6 +5,7 @@
 config FB_GEODE
 	bool "AMD Geode family framebuffer support"
 	depends on FB && PCI && (X86_32 || (X86 && COMPILE_TEST))
+	depends on !UML
 	help
 	  Say 'Y' here to allow you to select framebuffer drivers for
 	  the AMD Geode family of processors.
diff --git a/drivers/video/fbdev/matrox/matroxfb_maven.c b/drivers/video/fbdev/matrox/matroxfb_maven.c
index f2e02958673d..727a10a59811 100644
--- a/drivers/video/fbdev/matrox/matroxfb_maven.c
+++ b/drivers/video/fbdev/matrox/matroxfb_maven.c
@@ -1249,8 +1249,7 @@ static int maven_shutdown_client(struct i2c_client* clnt) {
 	return 0;
 }
 
-static int maven_probe(struct i2c_client *client,
-		       const struct i2c_device_id *id)
+static int maven_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	int err = -ENODEV;
@@ -1292,7 +1291,7 @@ static struct i2c_driver maven_driver={
 	.driver = {
 		.name	= "maven",
 	},
-	.probe		= maven_probe,
+	.probe_new	= maven_probe,
 	.remove		= maven_remove,
 	.id_table	= maven_id,
 };
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
index a9fd732f8103..0daaf9f89bab 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
@@ -12,7 +12,6 @@
 #include <linux/of.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 
 struct panel_drv_data {
 	struct omap_dss_device dssdev;
@@ -178,53 +177,15 @@ static struct omap_dss_driver tvc_driver = {
 	.set_wss		= tvc_set_wss,
 };
 
-static int tvc_probe_pdata(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct connector_atv_platform_data *pdata;
-	struct omap_dss_device *in, *dssdev;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "Failed to find video source\n");
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->invert_polarity = pdata->invert_polarity;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int tvc_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tvc_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
 	struct omap_dss_device *dssdev;
 	int r;
 
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
@@ -232,16 +193,11 @@ static int tvc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->dev = &pdev->dev;
 
-	if (dev_get_platdata(&pdev->dev)) {
-		r = tvc_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = tvc_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return r;
 	}
 
 	ddata->timings = tvc_pal_timings;
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
index 670b9c6eb5a9..8f9ff9fb4ca4 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
@@ -6,11 +6,12 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <drm/drm_edid.h>
 
@@ -41,7 +42,7 @@ struct panel_drv_data {
 
 	struct omap_video_timings timings;
 
-	int hpd_gpio;
+	struct gpio_desc *hpd_gpio;
 };
 
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
@@ -155,8 +156,8 @@ static bool hdmic_detect(struct omap_dss_device *dssdev)
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	struct omap_dss_device *in = ddata->in;
 
-	if (gpio_is_valid(ddata->hpd_gpio))
-		return gpio_get_value_cansleep(ddata->hpd_gpio);
+	if (ddata->hpd_gpio)
+		return gpiod_get_value_cansleep(ddata->hpd_gpio);
 	else
 		return in->ops.hdmi->detect(in);
 }
@@ -197,31 +198,6 @@ static struct omap_dss_driver hdmic_driver = {
 	.set_hdmi_infoframe	= hdmic_set_infoframe,
 };
 
-static int hdmic_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	int gpio;
-
-	/* HPD GPIO */
-	gpio = of_get_named_gpio(node, "hpd-gpios", 0);
-	if (gpio_is_valid(gpio))
-		ddata->hpd_gpio = gpio;
-	else
-		ddata->hpd_gpio = -ENODEV;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int hdmic_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -238,15 +214,18 @@ static int hdmic_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->dev = &pdev->dev;
 
-	r = hdmic_probe_of(pdev);
+	ddata->hpd_gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
+	r = PTR_ERR_OR_ZERO(ddata->hpd_gpio);
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->hpd_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
-				GPIOF_DIR_IN, "hdmi_hpd");
-		if (r)
-			goto err_reg;
+	gpiod_set_consumer_name(ddata->hpd_gpio, "hdmi_hpd");
+
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return r;
 	}
 
 	ddata->timings = hdmic_default_timings;
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
index ba7ed4039f8a..dd29dc5c77ec 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
@@ -11,11 +11,11 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
index 09a59bd93d61..7bac420169a6 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
@@ -6,11 +6,12 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
@@ -18,7 +19,8 @@ struct panel_drv_data {
 	struct omap_dss_device dssdev;
 	struct omap_dss_device *in;
 
-	int pd_gpio;
+	struct gpio_desc *pd_gpio;
+
 	int data_lines;
 
 	struct omap_video_timings timings;
@@ -86,8 +88,8 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 1);
+	if (ddata->pd_gpio)
+		gpiod_set_value_cansleep(ddata->pd_gpio, 0);
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -102,8 +104,8 @@ static void tfp410_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 0);
+	if (ddata->pd_gpio)
+		gpiod_set_value_cansleep(ddata->pd_gpio, 1);
 
 	in->ops.dpi->disable(in);
 
@@ -162,33 +164,6 @@ static const struct omapdss_dvi_ops tfp410_dvi_ops = {
 	.get_timings	= tfp410_get_timings,
 };
 
-static int tfp410_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
-
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->pd_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse PD gpio\n");
-		return gpio;
-	}
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tfp410_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -204,18 +179,21 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ddata);
 
-	r = tfp410_probe_of(pdev);
-	if (r)
+	ddata->pd_gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown",
+						 GPIOD_OUT_HIGH);
+	r = PTR_ERR_OR_ZERO(ddata->pd_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request PD GPIO: %d\n", r);
 		return r;
+	}
+
+	gpiod_set_consumer_name(ddata->pd_gpio, "tfp410 PD");
 
-	if (gpio_is_valid(ddata->pd_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
-				GPIOF_OUT_INIT_LOW, "tfp410 PD");
-		if (r) {
-			dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
-					ddata->pd_gpio);
-			goto err_gpio;
-		}
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source: %d\n", r);
+		return r;
 	}
 
 	dssdev = &ddata->dssdev;
@@ -235,7 +213,6 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	return 0;
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
index ff3d1e8e1e7b..9790053c5877 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
@@ -6,15 +6,13 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 #include <video/of_display_timing.h>
 
 struct panel_drv_data {
@@ -25,9 +23,6 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	/* used for non-DT boot, to be removed */
-	int backlight_gpio;
-
 	struct gpio_desc *enable_gpio;
 };
 
@@ -77,9 +72,6 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
 
 	gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	return 0;
@@ -93,9 +85,6 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
 	gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
 	in->ops.dpi->disable(in);
@@ -146,49 +135,6 @@ static struct omap_dss_driver panel_dpi_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-static int panel_dpi_probe_pdata(struct platform_device *pdev)
-{
-	const struct panel_dpi_platform_data *pdata;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev, *in;
-	struct videomode vm;
-	int r;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	videomode_from_timing(pdata->display_timing, &vm);
-	videomode_to_omap_video_timings(&vm, &ddata->videomode);
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
-					GPIOF_OUT_INIT_LOW, "panel enable");
-	if (r)
-		goto err_gpio;
-
-	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
-
-	ddata->backlight_gpio = pdata->backlight_gpio;
-
-	return 0;
-
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
 static int panel_dpi_probe_of(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
@@ -205,8 +151,6 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
 
 	ddata->enable_gpio = gpio;
 
-	ddata->backlight_gpio = -ENOENT;
-
 	r = of_get_display_timing(node, "panel-timing", &timing);
 	if (r) {
 		dev_err(&pdev->dev, "failed to get video timing\n");
@@ -233,30 +177,18 @@ static int panel_dpi_probe(struct platform_device *pdev)
 	struct omap_dss_device *dssdev;
 	int r;
 
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (ddata == NULL)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, ddata);
 
-	if (dev_get_platdata(&pdev->dev)) {
-		r = panel_dpi_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = panel_dpi_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
+	r = panel_dpi_probe_of(pdev);
+	if (r)
+		return r;
 
 	dssdev = &ddata->dssdev;
 	dssdev->dev = &pdev->dev;
@@ -275,7 +207,6 @@ static int panel_dpi_probe(struct platform_device *pdev)
 	return 0;
 
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
index a2c7c5cb1523..4fc4b26a8d30 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
@@ -10,8 +10,9 @@
 
 #include <linux/backlight.h>
 #include <linux/delay.h>
+#include <linux/err.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
@@ -20,7 +21,6 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 #include <video/mipi_display.h>
@@ -53,8 +53,8 @@ struct panel_drv_data {
 	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
 
 	/* panel HW configuration from DT or platform data */
-	int reset_gpio;
-	int ext_te_gpio;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *ext_te_gpio;
 
 	bool use_dsi_backlight;
 
@@ -250,8 +250,8 @@ static int dsicm_enter_ulps(struct panel_drv_data *ddata)
 	if (r)
 		goto err;
 
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		disable_irq(gpio_to_irq(ddata->ext_te_gpio));
+	if (ddata->ext_te_gpio)
+		disable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 
 	in->ops.dsi->disable(in, false, true);
 
@@ -292,8 +292,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 		goto err2;
 	}
 
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+	if (ddata->ext_te_gpio)
+		enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 
 	dsicm_queue_ulps_work(ddata);
 
@@ -306,8 +306,8 @@ err2:
 
 	r = dsicm_panel_reset(ddata);
 	if (!r) {
-		if (gpio_is_valid(ddata->ext_te_gpio))
-			enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+		if (ddata->ext_te_gpio)
+			enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 		ddata->ulps_enabled = false;
 	}
 err1:
@@ -556,16 +556,19 @@ static const struct attribute_group dsicm_attr_group = {
 
 static void dsicm_hw_reset(struct panel_drv_data *ddata)
 {
-	if (!gpio_is_valid(ddata->reset_gpio))
-		return;
-
-	gpio_set_value(ddata->reset_gpio, 1);
+	/*
+	 * Note that we appear to activate the reset line here. However
+	 * existing DTSes specified incorrect polarity for it (active high),
+	 * so in fact this deasserts the reset line.
+	 */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 	udelay(10);
 	/* reset the panel */
-	gpio_set_value(ddata->reset_gpio, 0);
-	/* assert reset */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 0);
+	/* keep reset asserted */
 	udelay(10);
-	gpio_set_value(ddata->reset_gpio, 1);
+	/* release reset line */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 	/* wait after releasing reset */
 	usleep_range(5000, 10000);
 }
@@ -886,7 +889,7 @@ static int dsicm_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
+	if (ddata->te_enabled && ddata->ext_te_gpio) {
 		schedule_delayed_work(&ddata->te_timeout_work,
 				msecs_to_jiffies(250));
 		atomic_set(&ddata->do_update, 1);
@@ -933,7 +936,7 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
 	else
 		r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
 
-	if (!gpio_is_valid(ddata->ext_te_gpio))
+	if (!ddata->ext_te_gpio)
 		in->ops.dsi->enable_te(in, enable);
 
 	/* possible panel bug */
@@ -1115,41 +1118,6 @@ static struct omap_dss_driver dsicm_ops = {
 	.memory_read	= dsicm_memory_read,
 };
 
-static int dsicm_probe_of(struct platform_device *pdev)
-{
-	struct device_node *node = pdev->dev.of_node;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&pdev->dev, "failed to parse reset gpio\n");
-		return gpio;
-	}
-	ddata->reset_gpio = gpio;
-
-	gpio = of_get_named_gpio(node, "te-gpios", 0);
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->ext_te_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse TE gpio\n");
-		return gpio;
-	}
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	/* TODO: ulps, backlight */
-
-	return 0;
-}
-
 static int dsicm_probe(struct platform_device *pdev)
 {
 	struct backlight_properties props;
@@ -1171,9 +1139,12 @@ static int dsicm_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->pdev = pdev;
 
-	r = dsicm_probe_of(pdev);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source: %d\n", r);
 		return r;
+	}
 
 	ddata->timings.x_res = 864;
 	ddata->timings.y_res = 480;
@@ -1200,24 +1171,27 @@ static int dsicm_probe(struct platform_device *pdev)
 
 	atomic_set(&ddata->do_update, 0);
 
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "taal rst");
-		if (r) {
-			dev_err(dev, "failed to request reset gpio\n");
-			return r;
-		}
+	ddata->reset_gpio = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request reset gpio: %d\n", r);
+		return r;
 	}
 
-	if (gpio_is_valid(ddata->ext_te_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
-				GPIOF_IN, "taal irq");
-		if (r) {
-			dev_err(dev, "GPIO request failed\n");
-			return r;
-		}
+	gpiod_set_consumer_name(ddata->reset_gpio, "taal rst");
+
+	ddata->ext_te_gpio = devm_gpiod_get_optional(&pdev->dev, "te",
+						     GPIOD_IN);
+	r = PTR_ERR_OR_ZERO(ddata->ext_te_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request TE gpio: %d\n", r);
+		return r;
+	}
+
+	if (ddata->ext_te_gpio) {
+		gpiod_set_consumer_name(ddata->ext_te_gpio, "taal irq");
 
-		r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
+		r = devm_request_irq(dev, gpiod_to_irq(ddata->ext_te_gpio),
 				dsicm_te_isr,
 				IRQF_TRIGGER_RISING,
 				"taal vsync", ddata);
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
index 3ce1f9d2e7c4..e69856cb62d5 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
@@ -11,7 +11,7 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <video/omapfb_dss.h>
 
@@ -46,9 +46,6 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	/* used for non-DT boot, to be removed */
-	int backlight_gpio;
-
 	struct gpio_desc *enable_gpio;
 };
 
@@ -166,9 +163,6 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	return 0;
@@ -185,9 +179,6 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
 	in->ops.dpi->disable(in);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
@@ -250,8 +241,6 @@ static int lb035q02_probe_of(struct spi_device *spi)
 
 	ddata->enable_gpio = gpio;
 
-	ddata->backlight_gpio = -ENOENT;
-
 	in = omapdss_of_find_source_for_first_ep(node);
 	if (IS_ERR(in)) {
 		dev_err(&spi->dev, "failed to find video source\n");
@@ -284,13 +273,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
-
 	ddata->videomode = lb035q02_timings;
 
 	dssdev = &ddata->dssdev;
@@ -310,7 +292,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	return 0;
 
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
index b407173e27b1..33563953b2ff 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
@@ -7,12 +7,12 @@
  * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/spi/spi.h>
+#include <linux/err.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
 
 #include <video/omapfb_dss.h>
 
@@ -24,8 +24,7 @@ struct panel_drv_data {
 
 	int data_lines;
 
-	int res_gpio;
-	int qvga_gpio;
+	struct gpio_desc *res_gpio;
 
 	struct spi_device *spi;
 };
@@ -155,8 +154,8 @@ static int nec_8048_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->res_gpio))
-		gpio_set_value_cansleep(ddata->res_gpio, 1);
+	/* Apparently existing DTSes use incorrect polarity (active high) */
+	gpiod_set_value_cansleep(ddata->res_gpio, 1);
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -171,8 +170,8 @@ static void nec_8048_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->res_gpio))
-		gpio_set_value_cansleep(ddata->res_gpio, 0);
+	/* Apparently existing DTSes use incorrect polarity (active high) */
+	gpiod_set_value_cansleep(ddata->res_gpio, 0);
 
 	in->ops.dpi->disable(in);
 
@@ -222,35 +221,6 @@ static struct omap_dss_driver nec_8048_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-
-static int nec_8048_probe_of(struct spi_device *spi)
-{
-	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&spi->dev, "failed to parse enable gpio\n");
-		return gpio;
-	}
-	ddata->res_gpio = gpio;
-
-	/* XXX the panel spec doesn't mention any QVGA pin?? */
-	ddata->qvga_gpio = -ENOENT;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int nec_8048_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -281,24 +251,22 @@ static int nec_8048_probe(struct spi_device *spi)
 
 	ddata->spi = spi;
 
-	r = nec_8048_probe_of(spi);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source: %d\n", r);
 		return r;
-
-	if (gpio_is_valid(ddata->qvga_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
-		if (r)
-			goto err_gpio;
 	}
 
-	if (gpio_is_valid(ddata->res_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->res_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd RES");
-		if (r)
-			goto err_gpio;
+	ddata->res_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->res_gpio);
+	if (r) {
+		dev_err(&spi->dev, "failed to request reset gpio: %d\n", r);
+		goto err_gpio;
 	}
 
+	gpiod_set_consumer_name(ddata->res_gpio, "lcd RES");
+
 	ddata->videomode = nec_8048_panel_timings;
 
 	dssdev = &ddata->dssdev;
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
index f1072c319de8..cc30758300e2 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
@@ -7,10 +7,9 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/regulator/consumer.h>
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
index c0965bee12c5..685c63aa4e03 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
@@ -18,12 +18,10 @@
 #include <linux/sched.h>
 #include <linux/backlight.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 
 #define MIPID_CMD_READ_DISP_ID		0x04
 #define MIPID_CMD_READ_RED		0x06
@@ -57,7 +55,8 @@ struct panel_drv_data {
 	struct omap_dss_device	dssdev;
 	struct omap_dss_device *in;
 
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
+
 	int datapairs;
 
 	struct omap_video_timings videomode;
@@ -546,8 +545,13 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
 	/*FIXME tweak me */
 	msleep(50);
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 1);
+	/*
+	 * Note that we appear to activate the reset line here. However
+	 * existing DTSes specified incorrect polarity for it (active high),
+	 * so in fact this deasserts the reset line.
+	 */
+	if (ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 
 	if (ddata->enabled) {
 		dev_dbg(&ddata->spi->dev, "panel already enabled\n");
@@ -596,8 +600,9 @@ static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
 	 */
 	msleep(50);
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 0);
+	/* see comment in acx565akm_panel_power_on() */
+	if (ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	/* FIXME need to tweak this delay */
 	msleep(100);
@@ -688,48 +693,6 @@ static struct omap_dss_driver acx565akm_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-static int acx565akm_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_acx565akm_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	ddata->reset_gpio = pdata->reset_gpio;
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-	ddata->in = in;
-
-	ddata->datapairs = pdata->datapairs;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int acx565akm_probe_of(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct device_node *np = spi->dev.of_node;
-
-	ddata->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
-
-	ddata->in = omapdss_of_find_source_for_first_ep(np);
-	if (IS_ERR(ddata->in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(ddata->in);
-	}
-
-	return 0;
-}
-
 static int acx565akm_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -741,6 +704,9 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	dev_dbg(&spi->dev, "%s\n", __func__);
 
+	if (!spi->dev.of_node)
+		return -ENODEV;
+
 	spi->mode = SPI_MODE_3;
 
 	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
@@ -753,28 +719,25 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	mutex_init(&ddata->mutex);
 
-	if (dev_get_platdata(&spi->dev)) {
-		r = acx565akm_probe_pdata(spi);
-		if (r)
-			return r;
-	} else if (spi->dev.of_node) {
-		r = acx565akm_probe_of(spi);
-		if (r)
-			return r;
-	} else {
-		dev_err(&spi->dev, "platform data missing!\n");
-		return -ENODEV;
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return r;
 	}
 
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd reset");
-		if (r)
-			goto err_gpio;
-	}
+	ddata->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+						    GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r)
+		goto err_gpio;
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 1);
+	if (ddata->reset_gpio) {
+		gpiod_set_consumer_name(ddata->reset_gpio, "lcd reset");
+
+		/* release the reset line */
+		gpiod_set_value_cansleep(ddata->reset_gpio, 1);
+	}
 
 	/*
 	 * After reset we have to wait 5 msec before the first
@@ -786,8 +749,8 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	r = panel_detect(ddata);
 
-	if (!ddata->enabled && gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 0);
+	if (!ddata->enabled && ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	if (r) {
 		dev_err(&spi->dev, "%s panel detect error\n", __func__);
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
index 3c0f887d3092..c18d290693c1 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <video/omapfb_dss.h>
 
 struct panel_drv_data {
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
index c0e4e0315b6b..1eaa35c27835 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
@@ -10,10 +10,9 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/consumer.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/err.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
@@ -58,7 +57,7 @@ struct panel_drv_data {
 
 	struct spi_device *spi;
 	struct regulator *vcc_reg;
-	int nreset_gpio;
+	struct gpio_desc *reset_gpio;
 	u16 gamma[12];
 	u32 mode;
 	u32 hmirror:1;
@@ -296,8 +295,7 @@ static int tpo_td043_power_on(struct panel_drv_data *ddata)
 	/* wait for panel to stabilize */
 	msleep(160);
 
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 1);
+	gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	tpo_td043_write(ddata->spi, 2,
 			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
@@ -320,8 +318,7 @@ static void tpo_td043_power_off(struct panel_drv_data *ddata)
 	tpo_td043_write(ddata->spi, 3,
 			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
 
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 0);
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 
 	/* wait for at least 2 vsyncs before cutting off power */
 	msleep(50);
@@ -454,32 +451,6 @@ static struct omap_dss_driver tpo_td043_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-
-static int tpo_td043_probe_of(struct spi_device *spi)
-{
-	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&spi->dev, "failed to parse enable gpio\n");
-		return gpio;
-	}
-	ddata->nreset_gpio = gpio;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tpo_td043_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -508,9 +479,12 @@ static int tpo_td043_probe(struct spi_device *spi)
 
 	ddata->spi = spi;
 
-	r = tpo_td043_probe_of(spi);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source: %d\n", r);
 		return r;
+	}
 
 	ddata->mode = TPO_R02_MODE_800x480;
 	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
@@ -521,16 +495,15 @@ static int tpo_td043_probe(struct spi_device *spi)
 		goto err_regulator;
 	}
 
-	if (gpio_is_valid(ddata->nreset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev,
-				ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
-				"lcd reset");
-		if (r < 0) {
-			dev_err(&spi->dev, "couldn't request reset GPIO\n");
-			goto err_gpio_req;
-		}
+	ddata->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r) {
+		dev_err(&spi->dev, "couldn't request reset GPIO\n");
+		goto err_gpio_req;
 	}
 
+	gpiod_set_consumer_name(ddata->reset_gpio, "lcd reset");
+
 	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
 	if (r) {
 		dev_err(&spi->dev, "failed to create sysfs files\n");
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c
index cb63bc0e92ca..b33f62c5cb22 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c
@@ -129,7 +129,6 @@ static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
 {
 	void __iomem *base = core->base;
 	u8 cur_addr;
-	char checksum = 0;
 	const int retries = 1000;
 	u8 seg_ptr = ext / 2;
 	u8 edidbase = ((ext % 2) * 0x80);
@@ -178,7 +177,6 @@ static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
 		}
 
 		pedid[cur_addr] = REG_GET(base, HDMI_CORE_I2CM_DATAI, 7, 0);
-		checksum += pedid[cur_addr];
 	}
 
 	return 0;
diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index 0823c9de859a..47d212944f30 100644
--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -1533,8 +1533,10 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	info = framebuffer_alloc(sizeof(struct pm2fb_par), &pdev->dev);
-	if (!info)
-		return -ENOMEM;
+	if (!info) {
+		err = -ENOMEM;
+		goto err_exit_disable;
+	}
 	default_par = info->par;
 
 	switch (pdev->device) {
@@ -1715,6 +1717,8 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	release_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len);
  err_exit_neither:
 	framebuffer_release(info);
+ err_exit_disable:
+	pci_disable_device(pdev);
 	return retval;
 }
 
@@ -1739,6 +1743,7 @@ static void pm2fb_remove(struct pci_dev *pdev)
 	fb_dealloc_cmap(&info->cmap);
 	kfree(info->pixmap.addr);
 	framebuffer_release(info);
+	pci_disable_device(pdev);
 }
 
 static const struct pci_device_id pm2fb_id_table[] = {
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index 696ac5431180..c46ed78298ae 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -2327,7 +2327,6 @@ static int pxafb_probe(struct platform_device *dev)
 
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
-		dev_err(&dev->dev, "no IRQ defined\n");
 		ret = -ENODEV;
 		goto failed_free_mem;
 	}
diff --git a/drivers/video/fbdev/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c
index 6d00893d41f4..ad9323ed8e2e 100644
--- a/drivers/video/fbdev/sh_mobile_lcdcfb.c
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.c
@@ -1188,7 +1188,7 @@ overlay_alpha_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct sh_mobile_lcdc_overlay *ovl = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", ovl->alpha);
+	return sysfs_emit(buf, "%u\n", ovl->alpha);
 }
 
 static ssize_t
@@ -1226,7 +1226,7 @@ overlay_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct sh_mobile_lcdc_overlay *ovl = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", ovl->mode);
+	return sysfs_emit(buf, "%u\n", ovl->mode);
 }
 
 static ssize_t
@@ -1265,7 +1265,7 @@ overlay_position_show(struct device *dev, struct device_attribute *attr,
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct sh_mobile_lcdc_overlay *ovl = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%d,%d\n", ovl->pos_x, ovl->pos_y);
+	return sysfs_emit(buf, "%d,%d\n", ovl->pos_x, ovl->pos_y);
 }
 
 static ssize_t
@@ -1306,7 +1306,7 @@ overlay_rop3_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct sh_mobile_lcdc_overlay *ovl = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", ovl->rop3);
+	return sysfs_emit(buf, "%u\n", ovl->rop3);
 }
 
 static ssize_t
diff --git a/drivers/video/fbdev/smscufx.c b/drivers/video/fbdev/smscufx.c
index 9343b7a4ac89..2ad6e98ce10d 100644
--- a/drivers/video/fbdev/smscufx.c
+++ b/drivers/video/fbdev/smscufx.c
@@ -1622,7 +1622,7 @@ static int ufx_usb_probe(struct usb_interface *interface,
 	struct usb_device *usbdev;
 	struct ufx_data *dev;
 	struct fb_info *info;
-	int retval;
+	int retval = -ENOMEM;
 	u32 id_rev, fpga_rev;
 
 	/* usb initialization */
@@ -1654,15 +1654,17 @@ static int ufx_usb_probe(struct usb_interface *interface,
 
 	if (!ufx_alloc_urb_list(dev, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
 		dev_err(dev->gdev, "ufx_alloc_urb_list failed\n");
-		goto e_nomem;
+		goto put_ref;
 	}
 
 	/* We don't register a new USB class. Our client interface is fbdev */
 
 	/* allocates framebuffer driver structure, not framebuffer memory */
 	info = framebuffer_alloc(0, &usbdev->dev);
-	if (!info)
-		goto e_nomem;
+	if (!info) {
+		dev_err(dev->gdev, "framebuffer_alloc failed\n");
+		goto free_urb_list;
+	}
 
 	dev->info = info;
 	info->par = dev;
@@ -1705,22 +1707,34 @@ static int ufx_usb_probe(struct usb_interface *interface,
 	check_warn_goto_error(retval, "unable to find common mode for display and adapter");
 
 	retval = ufx_reg_set_bits(dev, 0x4000, 0x00000001);
-	check_warn_goto_error(retval, "error %d enabling graphics engine", retval);
+	if (retval < 0) {
+		dev_err(dev->gdev, "error %d enabling graphics engine", retval);
+		goto setup_modes;
+	}
 
 	/* ready to begin using device */
 	atomic_set(&dev->usb_active, 1);
 
 	dev_dbg(dev->gdev, "checking var");
 	retval = ufx_ops_check_var(&info->var, info);
-	check_warn_goto_error(retval, "error %d ufx_ops_check_var", retval);
+	if (retval < 0) {
+		dev_err(dev->gdev, "error %d ufx_ops_check_var", retval);
+		goto reset_active;
+	}
 
 	dev_dbg(dev->gdev, "setting par");
 	retval = ufx_ops_set_par(info);
-	check_warn_goto_error(retval, "error %d ufx_ops_set_par", retval);
+	if (retval < 0) {
+		dev_err(dev->gdev, "error %d ufx_ops_set_par", retval);
+		goto reset_active;
+	}
 
 	dev_dbg(dev->gdev, "registering framebuffer");
 	retval = register_framebuffer(info);
-	check_warn_goto_error(retval, "error %d register_framebuffer", retval);
+	if (retval < 0) {
+		dev_err(dev->gdev, "error %d register_framebuffer", retval);
+		goto reset_active;
+	}
 
 	dev_info(dev->gdev, "SMSC UDX USB device /dev/fb%d attached. %dx%d resolution."
 		" Using %dK framebuffer memory\n", info->node,
@@ -1728,21 +1742,23 @@ static int ufx_usb_probe(struct usb_interface *interface,
 
 	return 0;
 
-error:
-	fb_dealloc_cmap(&info->cmap);
-destroy_modedb:
+reset_active:
+	atomic_set(&dev->usb_active, 0);
+setup_modes:
 	fb_destroy_modedb(info->monspecs.modedb);
 	vfree(info->screen_base);
 	fb_destroy_modelist(&info->modelist);
+error:
+	fb_dealloc_cmap(&info->cmap);
+destroy_modedb:
 	framebuffer_release(info);
+free_urb_list:
+	if (dev->urbs.count > 0)
+		ufx_free_urb_list(dev);
 put_ref:
 	kref_put(&dev->kref, ufx_free); /* ref for framebuffer */
 	kref_put(&dev->kref, ufx_free); /* last ref from kref_init */
 	return retval;
-
-e_nomem:
-	retval = -ENOMEM;
-	goto put_ref;
 }
 
 static void ufx_usb_disconnect(struct usb_interface *interface)
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 5c891aa00d59..046b9990d27c 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -803,10 +803,8 @@ static int ssd1307fb_probe(struct i2c_client *client)
 bl_init_error:
 	unregister_framebuffer(info);
 panel_init_error:
-	if (par->device_info->need_pwm) {
-		pwm_disable(par->pwm);
-		pwm_put(par->pwm);
-	}
+	pwm_disable(par->pwm);
+	pwm_put(par->pwm);
 regulator_enable_error:
 	if (par->vbat_reg)
 		regulator_disable(par->vbat_reg);
@@ -827,10 +825,8 @@ static void ssd1307fb_remove(struct i2c_client *client)
 	backlight_device_unregister(info->bl_dev);
 
 	unregister_framebuffer(info);
-	if (par->device_info->need_pwm) {
-		pwm_disable(par->pwm);
-		pwm_put(par->pwm);
-	}
+	pwm_disable(par->pwm);
+	pwm_put(par->pwm);
 	if (par->vbat_reg)
 		regulator_disable(par->vbat_reg);
 	fb_deferred_io_cleanup(info);
diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 00d789b6c0fa..f09f483c219b 100644
--- a/drivers/video/fbdev/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
@@ -1580,7 +1580,7 @@ static ssize_t uvesafb_show_vendor(struct device *dev,
 	struct uvesafb_par *par = info->par;
 
 	if (par->vbe_ib.oem_vendor_name_ptr)
-		return scnprintf(buf, PAGE_SIZE, "%s\n", (char *)
+		return sysfs_emit(buf, "%s\n", (char *)
 			(&par->vbe_ib) + par->vbe_ib.oem_vendor_name_ptr);
 	else
 		return 0;
@@ -1595,7 +1595,7 @@ static ssize_t uvesafb_show_product_name(struct device *dev,
 	struct uvesafb_par *par = info->par;
 
 	if (par->vbe_ib.oem_product_name_ptr)
-		return scnprintf(buf, PAGE_SIZE, "%s\n", (char *)
+		return sysfs_emit(buf, "%s\n", (char *)
 			(&par->vbe_ib) + par->vbe_ib.oem_product_name_ptr);
 	else
 		return 0;
@@ -1610,7 +1610,7 @@ static ssize_t uvesafb_show_product_rev(struct device *dev,
 	struct uvesafb_par *par = info->par;
 
 	if (par->vbe_ib.oem_product_rev_ptr)
-		return scnprintf(buf, PAGE_SIZE, "%s\n", (char *)
+		return sysfs_emit(buf, "%s\n", (char *)
 			(&par->vbe_ib) + par->vbe_ib.oem_product_rev_ptr);
 	else
 		return 0;
@@ -1625,7 +1625,7 @@ static ssize_t uvesafb_show_oem_string(struct device *dev,
 	struct uvesafb_par *par = info->par;
 
 	if (par->vbe_ib.oem_string_ptr)
-		return scnprintf(buf, PAGE_SIZE, "%s\n",
+		return sysfs_emit(buf, "%s\n",
 			(char *)(&par->vbe_ib) + par->vbe_ib.oem_string_ptr);
 	else
 		return 0;
@@ -1639,7 +1639,7 @@ static ssize_t uvesafb_show_nocrtc(struct device *dev,
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct uvesafb_par *par = info->par;
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", par->nocrtc);
+	return sysfs_emit(buf, "%d\n", par->nocrtc);
 }
 
 static ssize_t uvesafb_store_nocrtc(struct device *dev,
@@ -1758,6 +1758,7 @@ static int uvesafb_probe(struct platform_device *dev)
 out_unmap:
 	iounmap(info->screen_base);
 out_mem:
+	arch_phys_wc_del(par->mtrr_handle);
 	release_mem_region(info->fix.smem_start, info->fix.smem_len);
 out_reg:
 	release_region(0x3c0, 32);
@@ -1776,25 +1777,23 @@ out:
 static int uvesafb_remove(struct platform_device *dev)
 {
 	struct fb_info *info = platform_get_drvdata(dev);
+	struct uvesafb_par *par = info->par;
 
-	if (info) {
-		struct uvesafb_par *par = info->par;
+	sysfs_remove_group(&dev->dev.kobj, &uvesafb_dev_attgrp);
+	unregister_framebuffer(info);
+	release_region(0x3c0, 32);
+	iounmap(info->screen_base);
+	arch_phys_wc_del(par->mtrr_handle);
+	release_mem_region(info->fix.smem_start, info->fix.smem_len);
+	fb_destroy_modedb(info->monspecs.modedb);
+	fb_dealloc_cmap(&info->cmap);
 
-		sysfs_remove_group(&dev->dev.kobj, &uvesafb_dev_attgrp);
-		unregister_framebuffer(info);
-		release_region(0x3c0, 32);
-		iounmap(info->screen_base);
-		arch_phys_wc_del(par->mtrr_handle);
-		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-		fb_destroy_modedb(info->monspecs.modedb);
-		fb_dealloc_cmap(&info->cmap);
+	kfree(par->vbe_modes);
+	kfree(par->vbe_state_orig);
+	kfree(par->vbe_state_saved);
 
-		kfree(par->vbe_modes);
-		kfree(par->vbe_state_orig);
-		kfree(par->vbe_state_saved);
+	framebuffer_release(info);
 
-		framebuffer_release(info);
-	}
 	return 0;
 }
 
diff --git a/drivers/video/fbdev/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
index 1465fb7b619e..0374ee6b6d03 100644
--- a/drivers/video/fbdev/vermilion/vermilion.c
+++ b/drivers/video/fbdev/vermilion/vermilion.c
@@ -278,8 +278,10 @@ static int vmlfb_get_gpu(struct vml_par *par)
 
 	mutex_unlock(&vml_mutex);
 
-	if (pci_enable_device(par->gpu) < 0)
+	if (pci_enable_device(par->gpu) < 0) {
+		pci_dev_put(par->gpu);
 		return -ENODEV;
+	}
 
 	return 0;
 }
diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 32a6399b080b..2c1803eb196f 100644
--- a/drivers/video/fbdev/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
@@ -733,7 +733,14 @@ static int __init via_core_init(void)
 		return ret;
 	viafb_i2c_init();
 	viafb_gpio_init();
-	return pci_register_driver(&via_driver);
+	ret = pci_register_driver(&via_driver);
+	if (ret) {
+		viafb_gpio_exit();
+		viafb_i2c_exit();
+		return ret;
+	}
+
+	return 0;
 }
 
 static void __exit via_core_exit(void)
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
deleted file mode 100644
index 42b77249ee14..000000000000
--- a/include/video/omap-panel-data.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Header containing platform_data structs for omap panels
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *	   Archit Taneja <archit@ti.com>
- *
- * Copyright (C) 2011 Texas Instruments
- * Author: Mayuresh Janorkar <mayur@ti.com>
- *
- * Copyright (C) 2010 Canonical Ltd.
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-
-#ifndef __OMAP_PANEL_DATA_H
-#define __OMAP_PANEL_DATA_H
-
-#include <video/display_timing.h>
-
-/**
- * connector_atv platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @invert_polarity: invert signal polarity
- */
-struct connector_atv_platform_data {
-	const char *name;
-	const char *source;
-
-	bool invert_polarity;
-};
-
-/**
- * panel_dpi platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @data_lines: number of DPI datalines
- * @display_timing: timings for this panel
- * @backlight_gpio: gpio to enable/disable the backlight (or -1)
- * @enable_gpio: gpio to enable/disable the panel (or -1)
- */
-struct panel_dpi_platform_data {
-	const char *name;
-	const char *source;
-
-	int data_lines;
-
-	const struct display_timing *display_timing;
-
-	int backlight_gpio;
-	int enable_gpio;
-};
-
-/**
- * panel_acx565akm platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @reset_gpio: gpio to reset the panel (or -1)
- * @datapairs: number of SDI datapairs
- */
-struct panel_acx565akm_platform_data {
-	const char *name;
-	const char *source;
-
-	int reset_gpio;
-
-	int datapairs;
-};
-
-#endif /* __OMAP_PANEL_DATA_H */