summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-01-30 14:48:30 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-01-30 14:48:30 -0800
commit76a250f9a5f983c07e0735fac8370a584c520770 (patch)
tree6dd225958563ce4ea8e7670c6fcb6e5c9fd7460a
parentf8cc87b6c1e333ce7adc9fb2cb698d93b16eabe3 (diff)
parentb3506c7ed216dd2db1f06c2845da45018e2c508d (diff)
downloadlinux-76a250f9a5f983c07e0735fac8370a584c520770.tar.bz2
Merge branch 'for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: "Nothing too interesting. Several patches to convert mdelay() to usleep_range(), removal of unused pata_at32, and other low level driver specific changes" * 'for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: pata_pdc2027x: Replace mdelay with msleep ata: pata_it821x: Replace mdelay with usleep_range in it821x_firmware_command ata: sata_mv: Replace mdelay with usleep_range in mv_reset_channel ata: remove pata_at32 phy: brcm-sata: remove unused variable phy: brcm-sata: fix semicolon.cocci warnings ata: ahci_brcm: Recover from failures to identify devices phy: brcm-sata: Implement calibrate callback ahci: Add Intel Cannon Lake PCH-H PCI ID ata_piix: constify pci_bits libata:pata_atiixp: Don't use unconnected secondary port on SB600 ata: ahci_brcm: Avoid clobbering SATA_TOP_CTRL_BUS_CTRL ahci: Allow setting a default LPM policy for mobile chipsets ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI ahci: Annotate PCI ids for mobile Intel chipsets as such
-rw-r--r--drivers/ata/Kconfig28
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/ahci.c94
-rw-r--r--drivers/ata/ahci.h3
-rw-r--r--drivers/ata/ahci_brcm.c120
-rw-r--r--drivers/ata/ata_piix.c2
-rw-r--r--drivers/ata/pata_at32.c400
-rw-r--r--drivers/ata/pata_atiixp.c4
-rw-r--r--drivers/ata/pata_it821x.c2
-rw-r--r--drivers/ata/pata_pdc2027x.c4
-rw-r--r--drivers/ata/sata_mv.c2
-rw-r--r--drivers/phy/broadcom/phy-brcm-sata.c31
12 files changed, 221 insertions, 470 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index cb5339166563..a7120d621154 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -92,6 +92,25 @@ config SATA_AHCI
If unsure, say N.
+config SATA_MOBILE_LPM_POLICY
+ int "Default SATA Link Power Management policy for mobile chipsets"
+ range 0 4
+ default 0
+ depends on SATA_AHCI
+ help
+ Select the Default SATA Link Power Management (LPM) policy to use
+ for mobile / laptop variants of chipsets / "South Bridges".
+
+ The value set has the following meanings:
+ 0 => Keep firmware settings
+ 1 => Maximum performance
+ 2 => Medium power
+ 3 => Medium power with Device Initiated PM enabled
+ 4 => Minimum power
+
+ Note "Minimum power" is known to cause issues, including disk
+ corruption, with some disks and should not be used.
+
config SATA_AHCI_PLATFORM
tristate "Platform AHCI SATA support"
help
@@ -925,15 +944,6 @@ endif # ATA_BMDMA
comment "PIO-only SFF controllers"
-config PATA_AT32
- tristate "Atmel AVR32 PATA support (Experimental)"
- depends on AVR32 && PLATFORM_AT32AP
- help
- This option enables support for the IDE devices on the
- Atmel AT32AP platform.
-
- If unsure, say N.
-
config PATA_CMD640_PCI
tristate "CMD640 PCI PATA support (Experimental)"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 8daec3e657f8..f1f5a3fbc777 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -96,7 +96,6 @@ obj-$(CONFIG_PATA_VIA) += pata_via.o
obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
# SFF PIO only
-obj-$(CONFIG_PATA_AT32) += pata_at32.o
obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
obj-$(CONFIG_PATA_FALCON) += pata_falcon.o
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 5443cb71d7ba..355a95a83a34 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -65,6 +65,7 @@ enum board_ids {
/* board IDs by feature in alphabetical order */
board_ahci,
board_ahci_ign_iferr,
+ board_ahci_mobile,
board_ahci_nomsi,
board_ahci_noncq,
board_ahci_nosntf,
@@ -140,6 +141,13 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ [board_ahci_mobile] = {
+ AHCI_HFLAGS (AHCI_HFLAG_IS_MOBILE),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
[board_ahci_nomsi] = {
AHCI_HFLAGS (AHCI_HFLAG_NO_MSI),
.flags = AHCI_FLAG_COMMON,
@@ -252,13 +260,13 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
- { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x2929), board_ahci_mobile }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292a), board_ahci_mobile }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292b), board_ahci_mobile }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292c), board_ahci_mobile }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292f), board_ahci_mobile }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
- { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x294e), board_ahci_mobile }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
@@ -268,9 +276,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci_mobile }, /* PCH M AHCI */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
- { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci_mobile }, /* PCH M RAID */
{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
{ PCI_VDEVICE(INTEL, 0x19b0), board_ahci }, /* DNV AHCI */
{ PCI_VDEVICE(INTEL, 0x19b1), board_ahci }, /* DNV AHCI */
@@ -293,9 +301,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x19cE), board_ahci }, /* DNV AHCI */
{ PCI_VDEVICE(INTEL, 0x19cF), board_ahci }, /* DNV AHCI */
{ PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */
- { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c03), board_ahci_mobile }, /* CPT M AHCI */
{ PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */
- { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c05), board_ahci_mobile }, /* CPT M RAID */
{ PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */
{ PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */
{ PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */
@@ -304,28 +312,28 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */
{ PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
{ PCI_VDEVICE(INTEL, 0x1e02), board_ahci }, /* Panther Point AHCI */
- { PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point AHCI */
+ { PCI_VDEVICE(INTEL, 0x1e03), board_ahci_mobile }, /* Panther M AHCI */
{ PCI_VDEVICE(INTEL, 0x1e04), board_ahci }, /* Panther Point RAID */
{ PCI_VDEVICE(INTEL, 0x1e05), board_ahci }, /* Panther Point RAID */
{ PCI_VDEVICE(INTEL, 0x1e06), board_ahci }, /* Panther Point RAID */
- { PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point RAID */
+ { PCI_VDEVICE(INTEL, 0x1e07), board_ahci_mobile }, /* Panther M RAID */
{ PCI_VDEVICE(INTEL, 0x1e0e), board_ahci }, /* Panther Point RAID */
{ PCI_VDEVICE(INTEL, 0x8c02), board_ahci }, /* Lynx Point AHCI */
- { PCI_VDEVICE(INTEL, 0x8c03), board_ahci }, /* Lynx Point AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c03), board_ahci_mobile }, /* Lynx M AHCI */
{ PCI_VDEVICE(INTEL, 0x8c04), board_ahci }, /* Lynx Point RAID */
- { PCI_VDEVICE(INTEL, 0x8c05), board_ahci }, /* Lynx Point RAID */
+ { PCI_VDEVICE(INTEL, 0x8c05), board_ahci_mobile }, /* Lynx M RAID */
{ PCI_VDEVICE(INTEL, 0x8c06), board_ahci }, /* Lynx Point RAID */
- { PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */
+ { PCI_VDEVICE(INTEL, 0x8c07), board_ahci_mobile }, /* Lynx M RAID */
{ PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */
- { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */
- { PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */
- { PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */
- { PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */
- { PCI_VDEVICE(INTEL, 0x9c05), board_ahci }, /* Lynx Point-LP RAID */
- { PCI_VDEVICE(INTEL, 0x9c06), board_ahci }, /* Lynx Point-LP RAID */
- { PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */
- { PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */
- { PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci_mobile }, /* Lynx M RAID */
+ { PCI_VDEVICE(INTEL, 0x9c02), board_ahci_mobile }, /* Lynx LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x9c03), board_ahci_mobile }, /* Lynx LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x9c04), board_ahci_mobile }, /* Lynx LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c05), board_ahci_mobile }, /* Lynx LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c06), board_ahci_mobile }, /* Lynx LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c07), board_ahci_mobile }, /* Lynx LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c0e), board_ahci_mobile }, /* Lynx LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c0f), board_ahci_mobile }, /* Lynx LP RAID */
{ PCI_VDEVICE(INTEL, 0x1f22), board_ahci }, /* Avoton AHCI */
{ PCI_VDEVICE(INTEL, 0x1f23), board_ahci }, /* Avoton AHCI */
{ PCI_VDEVICE(INTEL, 0x1f24), board_ahci }, /* Avoton RAID */
@@ -353,26 +361,26 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x8d66), board_ahci }, /* Wellsburg RAID */
{ PCI_VDEVICE(INTEL, 0x8d6e), board_ahci }, /* Wellsburg RAID */
{ PCI_VDEVICE(INTEL, 0x23a3), board_ahci }, /* Coleto Creek AHCI */
- { PCI_VDEVICE(INTEL, 0x9c83), board_ahci }, /* Wildcat Point-LP AHCI */
- { PCI_VDEVICE(INTEL, 0x9c85), board_ahci }, /* Wildcat Point-LP RAID */
- { PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */
- { PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c83), board_ahci_mobile }, /* Wildcat LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x9c85), board_ahci_mobile }, /* Wildcat LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c87), board_ahci_mobile }, /* Wildcat LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c8f), board_ahci_mobile }, /* Wildcat LP RAID */
{ PCI_VDEVICE(INTEL, 0x8c82), board_ahci }, /* 9 Series AHCI */
- { PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c83), board_ahci_mobile }, /* 9 Series M AHCI */
{ PCI_VDEVICE(INTEL, 0x8c84), board_ahci }, /* 9 Series RAID */
- { PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c85), board_ahci_mobile }, /* 9 Series M RAID */
{ PCI_VDEVICE(INTEL, 0x8c86), board_ahci }, /* 9 Series RAID */
- { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c87), board_ahci_mobile }, /* 9 Series M RAID */
{ PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
- { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
- { PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */
- { PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
- { PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci_mobile }, /* 9 Series M RAID */
+ { PCI_VDEVICE(INTEL, 0x9d03), board_ahci_mobile }, /* Sunrise LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x9d05), board_ahci_mobile }, /* Sunrise LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9d07), board_ahci_mobile }, /* Sunrise LP RAID */
{ PCI_VDEVICE(INTEL, 0xa102), board_ahci }, /* Sunrise Point-H AHCI */
- { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
+ { PCI_VDEVICE(INTEL, 0xa103), board_ahci_mobile }, /* Sunrise M AHCI */
{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0xa106), board_ahci }, /* Sunrise Point-H RAID */
- { PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
+ { PCI_VDEVICE(INTEL, 0xa107), board_ahci_mobile }, /* Sunrise M RAID */
{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/
{ PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Lewisburg AHCI*/
@@ -386,6 +394,11 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/
{ PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/
{ PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/
+ { PCI_VDEVICE(INTEL, 0xa356), board_ahci }, /* Cannon Lake PCH-H RAID */
+ { PCI_VDEVICE(INTEL, 0x0f22), board_ahci_mobile }, /* Bay Trail AHCI */
+ { PCI_VDEVICE(INTEL, 0x0f23), board_ahci_mobile }, /* Bay Trail AHCI */
+ { PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
+ { PCI_VDEVICE(INTEL, 0x5ae3), board_ahci_mobile }, /* ApolloLake AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -593,6 +606,9 @@ static int marvell_enable = 1;
module_param(marvell_enable, int, 0644);
MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+static int mobile_lpm_policy = CONFIG_SATA_MOBILE_LPM_POLICY;
+module_param(mobile_lpm_policy, int, 0644);
+MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets");
static void ahci_pci_save_initial_config(struct pci_dev *pdev,
struct ahci_host_priv *hpriv)
@@ -1728,6 +1744,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = hpriv->em_msg_type;
+ if ((hpriv->flags & AHCI_HFLAG_IS_MOBILE) &&
+ mobile_lpm_policy >= ATA_LPM_UNKNOWN &&
+ mobile_lpm_policy <= ATA_LPM_MIN_POWER)
+ ap->target_lpm_policy = mobile_lpm_policy;
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 749fd94441b0..a9d996e17d75 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -251,6 +251,9 @@ enum {
AHCI_HFLAG_YES_ALPM = (1 << 23), /* force ALPM cap on */
AHCI_HFLAG_NO_WRITE_TO_RO = (1 << 24), /* don't write to read
only registers */
+ AHCI_HFLAG_IS_MOBILE = (1 << 25), /* mobile chipset, use
+ SATA_MOBILE_LPM_POLICY
+ as default lpm_policy */
/* ap->flags bits */
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 5936d1679bf3..ea430819c80b 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -70,6 +70,13 @@
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
+#define BUS_CTRL_ENDIAN_NSP_CONF \
+ (0x02 << DMADATA_ENDIAN_SHIFT | 0x02 << DMADESC_ENDIAN_SHIFT)
+
+#define BUS_CTRL_ENDIAN_CONF_MASK \
+ (0x3 << MMIO_ENDIAN_SHIFT | 0x3 << DMADESC_ENDIAN_SHIFT | \
+ 0x3 << DMADATA_ENDIAN_SHIFT | 0x3 << PIODATA_ENDIAN_SHIFT)
+
enum brcm_ahci_version {
BRCM_SATA_BCM7425 = 1,
BRCM_SATA_BCM7445,
@@ -89,14 +96,6 @@ struct brcm_ahci_priv {
enum brcm_ahci_version version;
};
-static const struct ata_port_info ahci_brcm_port_info = {
- .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
- .link_flags = ATA_LFLAG_NO_DB_DELAY,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_platform_ops,
-};
-
static inline u32 brcm_sata_readreg(void __iomem *addr)
{
/*
@@ -250,20 +249,105 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
static void brcm_sata_init(struct brcm_ahci_priv *priv)
{
void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
+ u32 data;
/* Configure endianness */
- if (priv->version == BRCM_SATA_NSP) {
- u32 data = brcm_sata_readreg(ctrl);
-
- data &= ~((0x03 << DMADATA_ENDIAN_SHIFT) |
- (0x03 << DMADESC_ENDIAN_SHIFT));
- data |= (0x02 << DMADATA_ENDIAN_SHIFT) |
- (0x02 << DMADESC_ENDIAN_SHIFT);
- brcm_sata_writereg(data, ctrl);
- } else
- brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, ctrl);
+ data = brcm_sata_readreg(ctrl);
+ data &= ~BUS_CTRL_ENDIAN_CONF_MASK;
+ if (priv->version == BRCM_SATA_NSP)
+ data |= BUS_CTRL_ENDIAN_NSP_CONF;
+ else
+ data |= BUS_CTRL_ENDIAN_CONF;
+ brcm_sata_writereg(data, ctrl);
+}
+
+static unsigned int brcm_ahci_read_id(struct ata_device *dev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ struct ata_port *ap = dev->link->ap;
+ struct ata_host *host = ap->host;
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct brcm_ahci_priv *priv = hpriv->plat_data;
+ void __iomem *mmio = hpriv->mmio;
+ unsigned int err_mask;
+ unsigned long flags;
+ int i, rc;
+ u32 ctl;
+
+ /* Try to read the device ID and, if this fails, proceed with the
+ * recovery sequence below
+ */
+ err_mask = ata_do_dev_read_id(dev, tf, id);
+ if (likely(!err_mask))
+ return err_mask;
+
+ /* Disable host interrupts */
+ spin_lock_irqsave(&host->lock, flags);
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ /* Perform the SATA PHY reset sequence */
+ brcm_sata_phy_disable(priv, ap->port_no);
+
+ /* Bring the PHY back on */
+ brcm_sata_phy_enable(priv, ap->port_no);
+
+ /* Re-initialize and calibrate the PHY */
+ for (i = 0; i < hpriv->nports; i++) {
+ rc = phy_init(hpriv->phys[i]);
+ if (rc)
+ goto disable_phys;
+
+ rc = phy_calibrate(hpriv->phys[i]);
+ if (rc) {
+ phy_exit(hpriv->phys[i]);
+ goto disable_phys;
+ }
+ }
+
+ /* Re-enable host interrupts */
+ spin_lock_irqsave(&host->lock, flags);
+ ctl = readl(mmio + HOST_CTL);
+ ctl |= HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return ata_do_dev_read_id(dev, tf, id);
+
+disable_phys:
+ while (--i >= 0) {
+ phy_power_off(hpriv->phys[i]);
+ phy_exit(hpriv->phys[i]);
+ }
+
+ return AC_ERR_OTHER;
+}
+
+static void brcm_ahci_host_stop(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+
+ ahci_platform_disable_resources(hpriv);
}
+static struct ata_port_operations ahci_brcm_platform_ops = {
+ .inherits = &ahci_ops,
+ .host_stop = brcm_ahci_host_stop,
+ .read_id = brcm_ahci_read_id,
+};
+
+static const struct ata_port_info ahci_brcm_port_info = {
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
+ .link_flags = ATA_LFLAG_NO_DB_DELAY,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_brcm_platform_ops,
+};
+
#ifdef CONFIG_PM_SLEEP
static int brcm_ahci_suspend(struct device *dev)
{
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index b702c20fbc2b..7ecb1322a514 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -458,7 +458,7 @@ static const struct piix_map_db *piix_map_db_table[] = {
[ich8_2port_sata_byt] = &ich8_2port_map_db,
};
-static struct pci_bits piix_enable_bits[] = {
+static const struct pci_bits piix_enable_bits[] = {
{ 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
};
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
deleted file mode 100644
index 9aeb7a6dd4d4..000000000000
--- a/drivers/ata/pata_at32.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * AVR32 SMC/CFC PATA Driver
- *
- * Copyright (C) 2007 Atmel Norway
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <scsi/scsi_host.h>
-#include <linux/ata.h>
-#include <linux/libata.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/board.h>
-#include <mach/smc.h>
-
-#define DRV_NAME "pata_at32"
-#define DRV_VERSION "0.0.3"
-
-/*
- * CompactFlash controller memory layout relative to the base address:
- *
- * Attribute memory: 0000 0000 -> 003f ffff
- * Common memory: 0040 0000 -> 007f ffff
- * I/O memory: 0080 0000 -> 00bf ffff
- * True IDE Mode: 00c0 0000 -> 00df ffff
- * Alt IDE Mode: 00e0 0000 -> 00ff ffff
- *
- * Only True IDE and Alt True IDE mode are needed for this driver.
- *
- * True IDE mode => CS0 = 0, CS1 = 1 (cmd, error, stat, etc)
- * Alt True IDE mode => CS0 = 1, CS1 = 0 (ctl, alt_stat)
- */
-#define CF_IDE_OFFSET 0x00c00000
-#define CF_ALT_IDE_OFFSET 0x00e00000
-#define CF_RES_SIZE 2048
-
-/*
- * Define DEBUG_BUS if you are doing debugging of your own EBI -> PATA
- * adaptor with a logic analyzer or similar.
- */
-#undef DEBUG_BUS
-
-/*
- * ATA PIO modes
- *
- * Name | Mb/s | Min cycle time | Mask
- * --------+-------+----------------+--------
- * Mode 0 | 3.3 | 600 ns | 0x01
- * Mode 1 | 5.2 | 383 ns | 0x03
- * Mode 2 | 8.3 | 240 ns | 0x07
- * Mode 3 | 11.1 | 180 ns | 0x0f
- * Mode 4 | 16.7 | 120 ns | 0x1f
- *
- * Alter PIO_MASK below according to table to set maximal PIO mode.
- */
-enum {
- PIO_MASK = ATA_PIO4,
-};
-
-/*
- * Struct containing private information about device.
- */
-struct at32_ide_info {
- unsigned int irq;
- struct resource res_ide;
- struct resource res_alt;
- void __iomem *ide_addr;
- void __iomem *alt_addr;
- unsigned int cs;
- struct smc_config smc;
-};
-
-/*
- * Setup SMC for the given ATA timing.
- */
-static int pata_at32_setup_timing(struct device *dev,
- struct at32_ide_info *info,
- const struct ata_timing *ata)
-{
- struct smc_config *smc = &info->smc;
- struct smc_timing timing;
-
- int active;
- int recover;
-
- memset(&timing, 0, sizeof(struct smc_timing));
-
- /* Total cycle time */
- timing.read_cycle = ata->cyc8b;
-
- /* DIOR <= CFIOR timings */
- timing.nrd_setup = ata->setup;
- timing.nrd_pulse = ata->act8b;
- timing.nrd_recover = ata->rec8b;
-
- /* Convert nanosecond timing to clock cycles */
- smc_set_timing(smc, &timing);
-
- /* Add one extra cycle setup due to signal ring */
- smc->nrd_setup = smc->nrd_setup + 1;
-
- active = smc->nrd_setup + smc->nrd_pulse;
- recover = smc->read_cycle - active;
-
- /* Need at least two cycles recovery */
- if (recover < 2)
- smc->read_cycle = active + 2;
-
- /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
- smc->ncs_read_setup = 1;
- smc->ncs_read_pulse = smc->read_cycle - 2;
-
- /* Write timings same as read timings */
- smc->write_cycle = smc->read_cycle;
- smc->nwe_setup = smc->nrd_setup;
- smc->nwe_pulse = smc->nrd_pulse;
- smc->ncs_write_setup = smc->ncs_read_setup;
- smc->ncs_write_pulse = smc->ncs_read_pulse;
-
- /* Do some debugging output of ATA and SMC timings */
- dev_dbg(dev, "ATA: C=%d S=%d P=%d R=%d\n",
- ata->cyc8b, ata->setup, ata->act8b, ata->rec8b);
-
- dev_dbg(dev, "SMC: C=%d S=%d P=%d NS=%d NP=%d\n",
- smc->read_cycle, smc->nrd_setup, smc->nrd_pulse,
- smc->ncs_read_setup, smc->ncs_read_pulse);
-
- /* Finally, configure the SMC */
- return smc_set_configuration(info->cs, smc);
-}
-
-/*
- * Procedures for libATA.
- */
-static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing timing;
- struct at32_ide_info *info = ap->host->private_data;
-
- int ret;
-
- /* Compute ATA timing */
- ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
- if (ret) {
- dev_warn(ap->dev, "Failed to compute ATA timing %d\n", ret);
- return;
- }
-
- /* Setup SMC to ATA timing */
- ret = pata_at32_setup_timing(ap->dev, info, &timing);
- if (ret) {
- dev_warn(ap->dev, "Failed to setup ATA timing %d\n", ret);
- return;
- }
-}
-
-static struct scsi_host_template at32_sht = {
- ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations at32_port_ops = {
- .inherits = &ata_sff_port_ops,
- .cable_detect = ata_cable_40wire,
- .set_piomode = pata_at32_set_piomode,
-};
-
-static int __init pata_at32_init_one(struct device *dev,
- struct at32_ide_info *info)
-{
- struct ata_host *host;
- struct ata_port *ap;
-
- host = ata_host_alloc(dev, 1);
- if (!host)
- return -ENOMEM;
-
- ap = host->ports[0];
-
- /* Setup ATA bindings */
- ap->ops = &at32_port_ops;
- ap->pio_mask = PIO_MASK;
- ap->flags |= ATA_FLAG_SLAVE_POSS;
-
- /*
- * Since all 8-bit taskfile transfers has to go on the lower
- * byte of the data bus and there is a bug in the SMC that
- * makes it impossible to alter the bus width during runtime,
- * we need to hardwire the address signals as follows:
- *
- * A_IDE(2:0) <= A_EBI(3:1)
- *
- * This makes all addresses on the EBI even, thus all data
- * will be on the lower byte of the data bus. All addresses
- * used by libATA need to be altered according to this.
- */
- ap->ioaddr.altstatus_addr = info->alt_addr + (0x06 << 1);
- ap->ioaddr.ctl_addr = info->alt_addr + (0x06 << 1);
-
- ap->ioaddr.data_addr = info->ide_addr + (ATA_REG_DATA << 1);
- ap->ioaddr.error_addr = info->ide_addr + (ATA_REG_ERR << 1);
- ap->ioaddr.feature_addr = info->ide_addr + (ATA_REG_FEATURE << 1);
- ap->ioaddr.nsect_addr = info->ide_addr + (ATA_REG_NSECT << 1);
- ap->ioaddr.lbal_addr = info->ide_addr + (ATA_REG_LBAL << 1);
- ap->ioaddr.lbam_addr = info->ide_addr + (ATA_REG_LBAM << 1);
- ap->ioaddr.lbah_addr = info->ide_addr + (ATA_REG_LBAH << 1);
- ap->ioaddr.device_addr = info->ide_addr + (ATA_REG_DEVICE << 1);
- ap->ioaddr.status_addr = info->ide_addr + (ATA_REG_STATUS << 1);
- ap->ioaddr.command_addr = info->ide_addr + (ATA_REG_CMD << 1);
-
- /* Set info as private data of ATA host */
- host->private_data = info;
-
- /* Register ATA device and return */
- return ata_host_activate(host, info->irq, ata_sff_interrupt,
- IRQF_SHARED | IRQF_TRIGGER_RISING,
- &at32_sht);
-}
-
-/*
- * This function may come in handy for people analyzing their own
- * EBI -> PATA adaptors.
- */
-#ifdef DEBUG_BUS
-
-static void __init pata_at32_debug_bus(struct device *dev,
- struct at32_ide_info *info)
-{
- const int d1 = 0xff;
- const int d2 = 0x00;
-
- int i;
-
- /* Write 8-bit values (registers) */
- iowrite8(d1, info->alt_addr + (0x06 << 1));
- iowrite8(d2, info->alt_addr + (0x06 << 1));
-
- for (i = 0; i < 8; i++) {
- iowrite8(d1, info->ide_addr + (i << 1));
- iowrite8(d2, info->ide_addr + (i << 1));
- }
-
- /* Write 16 bit values (data) */
- iowrite16(d1, info->ide_addr);
- iowrite16(d1 << 8, info->ide_addr);
-
- iowrite16(d1, info->ide_addr);
- iowrite16(d1 << 8, info->ide_addr);
-}
-
-#endif
-
-static int __init pata_at32_probe(struct platform_device *pdev)
-{
- const struct ata_timing initial_timing =
- {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
-
- struct device *dev = &pdev->dev;
- struct at32_ide_info *info;
- struct ide_platform_data *board = dev_get_platdata(&pdev->dev);
- struct resource *res;
-
- int irq;
- int ret;
-
- if (!board)
- return -ENXIO;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENXIO;
-
- /* Retrive IRQ */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- /* Setup struct containing private information */
- info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- info->irq = irq;
- info->cs = board->cs;
-
- /* Request memory resources */
- info->res_ide.start = res->start + CF_IDE_OFFSET;
- info->res_ide.end = info->res_ide.start + CF_RES_SIZE - 1;
- info->res_ide.name = "ide";
- info->res_ide.flags = IORESOURCE_MEM;
-
- ret = request_resource(res, &info->res_ide);
- if (ret)
- goto err_req_res_ide;
-
- info->res_alt.start = res->start + CF_ALT_IDE_OFFSET;
- info->res_alt.end = info->res_alt.start + CF_RES_SIZE - 1;
- info->res_alt.name = "alt";
- info->res_alt.flags = IORESOURCE_MEM;
-
- ret = request_resource(res, &info->res_alt);
- if (ret)
- goto err_req_res_alt;
-
- /* Setup non-timing elements of SMC */
- info->smc.bus_width = 2; /* 16 bit data bus */
- info->smc.nrd_controlled = 1; /* Sample data on rising edge of NRD */
- info->smc.nwe_controlled = 0; /* Drive data on falling edge of NCS */
- info->smc.nwait_mode = 3; /* NWAIT is in READY mode */
- info->smc.byte_write = 0; /* Byte select access type */
- info->smc.tdf_mode = 0; /* TDF optimization disabled */
- info->smc.tdf_cycles = 0; /* No TDF wait cycles */
-
- /* Setup SMC to ATA timing */
- ret = pata_at32_setup_timing(dev, info, &initial_timing);
- if (ret)
- goto err_setup_timing;
-
- /* Map ATA address space */
- ret = -ENOMEM;
- info->ide_addr = devm_ioremap(dev, info->res_ide.start, 16);
- info->alt_addr = devm_ioremap(dev, info->res_alt.start, 16);
- if (!info->ide_addr || !info->alt_addr)
- goto err_ioremap;
-
-#ifdef DEBUG_BUS
- pata_at32_debug_bus(dev, info);
-#endif
-
- /* Setup and register ATA device */
- ret = pata_at32_init_one(dev, info);
- if (ret)
- goto err_ata_device;
-
- return 0;
-
- err_ata_device:
- err_ioremap:
- err_setup_timing:
- release_resource(&info->res_alt);
- err_req_res_alt:
- release_resource(&info->res_ide);
- err_req_res_ide:
- kfree(info);
-
- return ret;
-}
-
-static int __exit pata_at32_remove(struct platform_device *pdev)
-{
- struct ata_host *host = platform_get_drvdata(pdev);
- struct at32_ide_info *info;
-
- if (!host)
- return 0;
-
- info = host->private_data;
- ata_host_detach(host);
-
- if (!info)
- return 0;
-
- release_resource(&info->res_ide);
- release_resource(&info->res_alt);
-
- kfree(info);
-
- return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:at32_ide");
-
-static struct platform_driver pata_at32_driver = {
- .remove = __exit_p(pata_at32_remove),
- .driver = {
- .name = "at32_ide",
- },
-};
-
-module_platform_driver_probe(pata_at32_driver, pata_at32_probe);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("AVR32 SMC/CFC PATA Driver");
-MODULE_AUTHOR("Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com>");
-MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 49d705c9f0f7..4d49fd3c927b 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -278,6 +278,10 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &info, &info };
+ /* SB600 doesn't have secondary port wired */
+ if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE))
+ ppi[1] = &ata_dummy_port_info;
+
return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
ATA_HOST_PARALLEL_SCAN);
}
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 7a21edf89e72..8468b300193b 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -683,7 +683,7 @@ static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
ioread16_rep(ap->ioaddr.data_addr, buf, len/2);
return (u8 *)buf;
}
- mdelay(1);
+ usleep_range(500, 1000);
}
kfree(buf);
printk(KERN_ERR "it821x_firmware_command: timeout\n");
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 6db2e34bd52f..1a18e675ba9f 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -580,7 +580,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
ioread16(mmio_base + PDC_PLL_CTL); /* flush */
/* Wait the PLL circuit to be stable */
- mdelay(30);
+ msleep(30);
#ifdef PDC_DEBUG
/*
@@ -620,7 +620,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
start_time = ktime_get();
/* Let the counter run for 100 ms. */
- mdelay(100);
+ msleep(100);
/* Read the counter values again */
end_count = pdc_read_counter(host);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index cc208b72b199..42d4589b43d4 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -3596,7 +3596,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
hpriv->ops->phy_errata(hpriv, mmio, port_no);
if (IS_GEN_I(hpriv))
- mdelay(1);
+ usleep_range(500, 1000);
}
static void mv_pmp_select(struct ata_port *ap, int pmp)
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index 3f953db70288..8708ea3b4d6d 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -150,6 +150,9 @@ enum sata_phy_regs {
TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff,
TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84,
TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
+
+ RXPMD_REG_BANK = 0x1c0,
+ RXPMD_RX_FREQ_MON_CONTROL1 = 0x87,
};
enum sata_phy_ctrl_regs {
@@ -505,8 +508,36 @@ static int brcm_sata_phy_init(struct phy *phy)
return rc;
}
+static void brcm_stb_sata_calibrate(struct brcm_sata_port *port)
+{
+ void __iomem *base = brcm_sata_pcb_base(port);
+ u32 tmp = BIT(8);
+
+ brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
+ ~tmp, tmp);
+}
+
+static int brcm_sata_phy_calibrate(struct phy *phy)
+{
+ struct brcm_sata_port *port = phy_get_drvdata(phy);
+ int rc = -EOPNOTSUPP;
+
+ switch (port->phy_priv->version) {
+ case BRCM_SATA_PHY_STB_28NM:
+ case BRCM_SATA_PHY_STB_40NM:
+ brcm_stb_sata_calibrate(port);
+ rc = 0;
+ break;
+ default:
+ break;
+ }
+
+ return rc;
+}
+
static const struct phy_ops phy_ops = {
.init = brcm_sata_phy_init,
+ .calibrate = brcm_sata_phy_calibrate,
.owner = THIS_MODULE,
};