diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-10 10:58:42 +0900 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-10 10:58:42 +0900 |
| commit | 943c2acea53784c45fb291498d04d5188fdea891 (patch) | |
| tree | 063fac3e584f8f4a5babbc329499f84b3da291d7 | |
| parent | 10f39f04b2cb7a06ba5d4ea0f20bd156d0367bee (diff) | |
| parent | e6c085863f97f0a8f009753e1baaf83e4aac7b42 (diff) | |
| download | linux-943c2acea53784c45fb291498d04d5188fdea891.tar.bz2 | |
Merge tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
"Core:
- Add DT properties for card detection (broken-cd, cd-gpios,
non-removable)
- Don't poll non-removable devices
- Fixup/rework eMMC sleep mode/"power off notify" feature
- Support eMMC background operations (BKOPS). To set the one-time
programmable fuse that enables bkops on an eMMC that doesn't
already have it set, you can use the "mmc bkops enable" command in:
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git
Drivers:
- atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree
support
- bfin_sdh: Add support for the controller in bf60x
- dw_mmc: Support Samsung Exynos SoCs
- eSDHC: Add ADMA support
- sdhci: Support testing a cd-gpio (from slot-gpio) instead of
presence bit
- sdhci-pltfm: Support broken-cd DT property
- tegra: Convert to only supporting DT (mach-tegra has gone DT-only)"
* tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits)
mmc: core: Fixup broken suspend and eMMC4.5 power off notify
mmc: sdhci-spear: Add clk_{un}prepare() support
mmc: sdhci-spear: add device tree bindings
mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume
mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator
mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks
mmc: dt: Support "broken-cd" property in sdhci-pltfm
mmc: sdhci-s3c: fix the wrong number of max bus clocks
mmc: sh-mmcif: avoid oops on spurious interrupts
mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ
mmc: sdhci-s3c: Fix crash on module insertion for second time
mmc: sdhci-s3c: Enable only required bus clock
mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration"
mmc: mxcmmc: fix bug that may block a data transfer forever
mmc: omap_hsmmc: Pass on the suspend failure to the PM core
mmc: atmel-mci: AP700x PDC is not connected to MCI
mmc: atmel-mci: DMA can be used with other controllers
mmc: mmci: use clk_prepare_enable and clk_disable_unprepare
mmc: sdhci-s3c: Add device tree support
mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
...
55 files changed, 2277 insertions, 809 deletions
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt new file mode 100644 index 000000000000..0a85c70cd30a --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt @@ -0,0 +1,68 @@ +* Atmel High Speed MultiMedia Card Interface + +This controller on atmel products provides an interface for MMC, SD and SDIO +types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the atmel-mci driver. + +1) MCI node + +Required properties: +- compatible: should be "atmel,hsmci" +- #address-cells: should be one. The cell is the slot id. +- #size-cells: should be zero. +- at least one slot node + +The node contains child nodes for each slot that the platform uses + +Example MCI node: + +mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4>; + #address-cells = <1>; + #size-cells = <0>; + + [ child node definitions...] +}; + +2) slot nodes + +Required properties: +- reg: should contain the slot id. +- bus-width: number of data lines connected to the controller + +Optional properties: +- cd-gpios: specify GPIOs for card detection +- cd-inverted: invert the value of external card detect gpio line +- wp-gpios: specify GPIOs for write protection + +Example slot node: + +slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0> + cd-inverted; +}; + +Example full MCI node: +mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4>; + #address-cells = <1>; + #size-cells = <0>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0> + cd-inverted; + }; + slot@1 { + reg = <1>; + bus-width = <4>; + }; +}; diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt new file mode 100644 index 000000000000..792768953330 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -0,0 +1,87 @@ +* Samsung Exynos specific extensions to the Synopsis Designware Mobile + Storage Host Controller + +The Synopsis designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsis dw mshc controller properties described +by synposis-dw-mshc.txt and the properties used by the Samsung Exynos specific +extensions to the Synopsis Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210 + specific extentions. + - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412 + specific extentions. + - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 + specific extentions. + +* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface + unit (ciu) clock. This property is applicable only for Exynos5 SoC's and + ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7. + +* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value + in transmit mode and CIU clock phase shift value in receive mode for single + data rate mode operation. Refer notes below for the order of the cells and the + valid values. + +* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value + in transmit mode and CIU clock phase shift value in receive mode for double + data rate mode operation. Refer notes below for the order of the cells and the + valid values. + + Notes for the sdr-timing and ddr-timing values: + + The order of the cells should be + - First Cell: CIU clock phase shift value for tx mode. + - Second Cell: CIU clock phase shift value for rx mode. + + Valid values for SDR and DDR CIU clock timing for Exynos5250: + - valid value for tx phase shift and rx phase shift is 0 to 7. + - when CIU clock divider value is set to 3, all possible 8 phase shift + values can be used. + - if CIU clock divider value is 0 (that is divide by 1), both tx and rx + phase shift clocks should be 0. + +Required properties for a slot: + +* gpios: specifies a list of gpios used for command, clock and data bus. The + first gpio is the command line and the second gpio is the clock line. The + rest of the gpios (depending on the bus-width property) are the data lines in + no particular order. The format of the gpio specifier depends on the gpio + controller. + +Example: + + The MSHC controller node can be split into two portions, SoC specific and + board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 8a6811f4a02f..8e2e0ba2f486 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -9,12 +9,17 @@ Interpreted by the OF core: Required properties: - bus-width: Number of data lines, can be <1>, <4>, or <8> +Card detection: +If no property below is supplied, standard SDHCI card detect is used. +Only one of the properties in this section should be supplied: + - broken-cd: There is no card detection available; polling must be used. + - cd-gpios: Specify GPIOs for card detection, see gpio binding + - non-removable: non-removable slot (like eMMC); assume always present. + Optional properties: -- cd-gpios: Specify GPIOs for card detection, see gpio binding - wp-gpios: Specify GPIOs for write protection, see gpio binding - cd-inverted: when present, polarity on the cd gpio line is inverted - wp-inverted: when present, polarity on the wp gpio line is inverted -- non-removable: non-removable slot (like eMMC) - max-frequency: maximum operating clock frequency Example: diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt new file mode 100644 index 000000000000..b7025de7dced --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt @@ -0,0 +1,25 @@ +* PXA MMC drivers + +Driver bindings for the PXA MCI (MMC/SDIO) interfaces + +Required properties: +- compatible: Should be "marvell,pxa-mmc". +- vmmc-supply: A regulator for VMMC + +Optional properties: +- marvell,detect-delay-ms: sets the detection delay timeout in ms. +- marvell,gpio-power: GPIO spec for the card power enable pin + +This file documents differences between the core properties in mmc.txt +and the properties used by the pxa-mmc driver. + +Examples: + +mmc0: mmc@41100000 { + compatible = "marvell,pxa-mmc"; + reg = <0x41100000 0x1000>; + interrupts = <23>; + cd-gpios = <&gpio 23 0>; + wp-gpios = <&gpio 24 0>; +}; + diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt new file mode 100644 index 000000000000..630a7d7f4718 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt @@ -0,0 +1,53 @@ +* Samsung's SDHCI Controller device tree bindings + +Samsung's SDHCI controller is used as a connectivity interface with external +MMC, SD and eMMC storage mediums. This file documents differences between the +core mmc properties described by mmc.txt and the properties used by the +Samsung implmentation of the SDHCI controller. + +Note: The mmc core bindings documentation states that if none of the core +card-detect bindings are used, then the standard sdhci card detect mechanism +is used. The Samsung's SDHCI controller bindings extends this as listed below. + +[A] The property "samsung,cd-pinmux-gpio" can be used as stated in the + "Optional Board Specific Properties" section below. + +[B] If core card-detect bindings and "samsung,cd-pinmux-gpio" property + is not specified, it is assumed that there is no card detection + mechanism used. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci + controller. + - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci + controller. + +Required Board Specific Properties: +- gpios: Should specify the gpios used for clock, command and data lines. The + gpio specifier format depends on the gpio controller. + +Optional Board Specific Properties: +- samsung,cd-pinmux-gpio: Specifies the card detect line that is routed + through a pinmux to the card-detect pin of the card slot. This property + should be used only if none of the mmc core card-detect properties are + used. + +Example: + sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <0 75 0>; + bus-width = <4>; + cd-gpios = <&gpk2 2 2 3 3>; + gpios = <&gpk2 0 2 0 3>, /* clock line */ + <&gpk2 1 2 0 3>, /* command line */ + <&gpk2 3 2 3 3>, /* data line 0 */ + <&gpk2 4 2 3 3>, /* data line 1 */ + <&gpk2 5 2 3 3>, /* data line 2 */ + <&gpk2 6 2 3 3>; /* data line 3 */ + }; + + Note: This example shows both SoC specific and board specific properties + in a single device node. The properties can be actually be seperated + into SoC specific node and board specific node. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt new file mode 100644 index 000000000000..ae9aab9abcd7 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt @@ -0,0 +1,14 @@ +* Marvell sdhci-dove controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers. + +- compatible: Should be "marvell,dove-sdhci". + +Example: + +sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>; +}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-spear.txt b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt new file mode 100644 index 000000000000..fd3643e7e467 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt @@ -0,0 +1,18 @@ +* SPEAr SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-spear driver. + +Required properties: +- compatible: "st,spear300-sdhci" + +Optional properties: +- cd-gpios: card detect gpio, with zero flags. + +Example: + + sdhci@fc000000 { + compatible = "st,spear300-sdhci"; + reg = <0xfc000000 0x1000>; + cd-gpios = <&gpio0 6 0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt new file mode 100644 index 000000000000..06cd32d08052 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt @@ -0,0 +1,79 @@ +* Synopsis Designware Mobile Storage Host Controller + +The Synopsis designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core mmc properties described by mmc.txt and the +properties used by the Synopsis Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. +* #address-cells: should be 1. +* #size-cells: should be 0. + +# Slots: The slot specific information are contained within child-nodes with + each child-node representing a supported slot. There should be atleast one + child node representing a card slot. The name of the child node representing + the slot is recommended to be slot@n where n is the unique number of the slot + connnected to the controller. The following are optional properties which + can be included in the slot child node. + + * reg: specifies the physical slot number. The valid values of this + property is 0 to (num-slots -1), where num-slots is the value + specified by the num-slots property. + + * bus-width: as documented in mmc core bindings. + + * wp-gpios: specifies the write protect gpio line. The format of the + gpio specifier depends on the gpio controller. If the write-protect + line is not available, this property is optional. + +Optional properties: + +* num-slots: specifies the number of slots supported by the controller. + The number of physical slots actually used could be equal or less than the + value specified by num-slots. If this property is not specified, the value + of num-slot property is assumed to be 1. + +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not + specified, the default value of the fifo size is determined from the + controller registers. + +* card-detect-delay: Delay in milli-seconds before detecting card after card + insert event. The default value is 0. + +* supports-highspeed: Enables support for high speed cards (upto 50MHz) + +* broken-cd: as documented in mmc core bindings. + +Aliases: + +- All the MSHC controller nodes should be represented in the aliases node using + the following format 'mshc{n}' where n is a unique number for the alias. + +Example: + +The MSHC controller node can be split into two portions, SoC specific and +board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "snps,dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index eae3cd86831e..0f6ff811da07 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1544,7 +1544,7 @@ S: Supported F: drivers/rtc/rtc-bfin.c BLACKFIN SDH DRIVER -M: Cliff Cai <cliff.cai@analog.com> +M: Sonic Zhang <sonic.zhang@analog.com> L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported @@ -5207,8 +5207,10 @@ S: Maintained F: drivers/mmc/host/omap.c OMAP HS MMC SUPPORT +M: Venkatraman S <svenkatr@ti.com> +L: linux-mmc@vger.kernel.org L: linux-omap@vger.kernel.org -S: Orphan +S: Maintained F: drivers/mmc/host/omap_hsmmc.c OMAP RANDOM NUMBER GENERATOR SUPPORT diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index d71b8d581e3d..1e7c7a8e2123 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -80,8 +80,7 @@ }; sdhci@70000000 { - int-gpio = <&gpio1 0 0>; - power-gpio = <&gpio1 2 1>; + cd-gpios = <&gpio1 0 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index e4e912f95024..082328bd64ab 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -103,8 +103,6 @@ }; sdhci@70000000 { - power-gpio = <&gpio0 2 1>; - power_always_enb; status = "okay"; }; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 8ac5246e2ab2..06c42cfb7c34 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -26,6 +26,7 @@ #include <linux/suspend.h> #include <linux/fault-inject.h> #include <linux/random.h> +#include <linux/slab.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -41,6 +42,12 @@ #include "sd_ops.h" #include "sdio_ops.h" +/* + * Background operations can take a long time, depending on the housekeeping + * operations the card has to perform. + */ +#define MMC_BKOPS_MAX_TIMEOUT (4 * 60 * 1000) /* max time to wait in ms */ + static struct workqueue_struct *workqueue; static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; @@ -245,6 +252,70 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) host->ops->request(host, mrq); } +/** + * mmc_start_bkops - start BKOPS for supported cards + * @card: MMC card to start BKOPS + * @form_exception: A flag to indicate if this function was + * called due to an exception raised by the card + * + * Start background operations whenever requested. + * When the urgent BKOPS bit is set in a R1 command response + * then background operations should be started immediately. +*/ +void mmc_start_bkops(struct mmc_card *card, bool from_exception) +{ + int err; + int timeout; + bool use_busy_signal; + + BUG_ON(!card); + + if (!card->ext_csd.bkops_en || mmc_card_doing_bkops(card)) + return; + + err = mmc_read_bkops_status(card); + if (err) { + pr_err("%s: Failed to read bkops status: %d\n", + mmc_hostname(card->host), err); + return; + } + + if (!card->ext_csd.raw_bkops_status) + return; + + if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 && + from_exception) + return; + + mmc_claim_host(card->host); + if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) { + timeout = MMC_BKOPS_MAX_TIMEOUT; + use_busy_signal = true; + } else { + timeout = 0; + use_busy_signal = false; + } + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal); + if (err) { + pr_warn("%s: Error %d starting bkops\n", + mmc_hostname(card->host), err); + goto out; + } + + /* + * For urgent bkops status (LEVEL_2 and more) + * bkops executed synchronously, otherwise + * the operation is in progress + */ + if (!use_busy_signal) + mmc_card_set_doing_bkops(card); +out: + mmc_release_host(card->host); +} +EXPORT_SYMBOL(mmc_start_bkops); + static void mmc_wait_done(struct mmc_request *mrq) { complete(&mrq->completion); @@ -354,6 +425,14 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host, if (host->areq) { mmc_wait_for_req_done(host, host->areq->mrq); err = host->areq->err_check(host->card, host->areq); + /* + * Check BKOPS urgency for each R1 response + */ + if (host->card && mmc_card_mmc(host->card) && + ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) || + (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) && + (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) + mmc_start_bkops(host->card, true); } if (!err && areq) @@ -398,7 +477,7 @@ EXPORT_SYMBOL(mmc_wait_for_req); * @card: the MMC card associated with the HPI transfer * * Issued High Priority Interrupt, and check for card status - * util out-of prg-state. + * until out-of prg-state. */ int mmc_interrupt_hpi(struct mmc_card *card) { @@ -424,8 +503,9 @@ int mmc_interrupt_hpi(struct mmc_card *card) case R1_STATE_IDLE: case R1_STATE_READY: case R1_STATE_STBY: + case R1_STATE_TRAN: /* - * In idle states, HPI is not needed and the caller + * In idle and transfer states, HPI is not needed and the caller * can issue the next intended command immediately */ goto out; @@ -489,6 +569,64 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries EXPORT_SYMBOL(mmc_wait_for_cmd); /** + * mmc_stop_bkops - stop ongoing BKOPS + * @card: MMC card to check BKOPS + * + * Send HPI command to stop ongoing background operations to + * allow rapid servicing of foreground operations, e.g. read/ + * writes. Wait until the card comes out of the programming state + * to avoid errors in servicing read/write requests. + */ +int mmc_stop_bkops(struct mmc_card *card) +{ + int err = 0; + + BUG_ON(!card); + err = mmc_interrupt_hpi(card); + + /* + * If err is EINVAL, we can't issue an HPI. + * It should complete the BKOPS. + */ + if (!err || (err == -EINVAL)) { + mmc_card_clr_doing_bkops(card); + err = 0; + } + + return err; +} +EXPORT_SYMBOL(mmc_stop_bkops); + +int mmc_read_bkops_status(struct mmc_card *card) +{ + int err; + u8 *ext_csd; + + /* + * In future work, we should consider storing the entire ext_csd. + */ + ext_csd = kmalloc(512, GFP_KERNEL); + if (!ext_csd) { + pr_err("%s: could not allocate buffer to receive the ext_csd.\n", + mmc_hostname(card->host)); + return -ENOMEM; + } + + mmc_claim_host(card->host); + err = mmc_send_ext_csd(card, ext_csd); + mmc_release_host(card->host); + if (err) + goto out; + + card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS]; + card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS]; +out: + kfree(ext_csd); + return err; +} +EXPORT_SYMBOL(mmc_read_bkops_status); + +/** * mmc_set_data_timeout - set the timeout for a data command * @data: data phase for command * @card: the MMC card associated with the data transfer @@ -975,7 +1113,8 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, int tmp; int voltage; - /* REVISIT mmc_vddrange_to_ocrmask() may have set some + /* + * REVISIT mmc_vddrange_to_ocrmask() may have set some * bits this regulator doesn't quite support ... don't * be too picky, most cards and regulators are OK with * a 0.1V range goof (it's a small error percentage). @@ -989,12 +1128,13 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, max_uV = min_uV + 100 * 1000; } - /* avoid needless changes to this voltage; the regulator - * might not allow this operation + /* + * If we're using a fixed/static regulator, don't call + * regulator_set_voltage; it would fail. */ voltage = regulator_get_voltage(supply); - if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE) + if (regulator_count_voltages(supply) == 1) min_uV = max_uV = voltage; if (voltage < 0) @@ -1133,48 +1273,6 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) mmc_host_clk_release(host); } -static void mmc_poweroff_notify(struct mmc_host *host) -{ - struct mmc_card *card; - unsigned int timeout; - unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION; - int err = 0; - - card = host->card; - mmc_claim_host(host); - - /* - * Send power notify command only if card - * is mmc and notify state is powered ON - */ - if (card && mmc_card_mmc(card) && - (card->poweroff_notify_state == MMC_POWERED_ON)) { - - if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { - notify_type = EXT_CSD_POWER_OFF_SHORT; - timeout = card->ext_csd.generic_cmd6_time; - card->poweroff_notify_state = MMC_POWEROFF_SHORT; - } else { - notify_type = EXT_CSD_POWER_OFF_LONG; - timeout = card->ext_csd.power_off_longtime; - card->poweroff_notify_state = MMC_POWEROFF_LONG; - } - - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_POWER_OFF_NOTIFICATION, - notify_type, timeout); - - if (err && err != -EBADMSG) - pr_err("Device failed to respond within %d poweroff " - "time. Forcefully powering down the device\n", - timeout); - - /* Set the card state to no notification after the poweroff */ - card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; - } - mmc_release_host(host); -} - /* * Apply power to the MMC stack. This is a two-stage process. * First, we enable power to the card without the clock running. @@ -1237,8 +1335,6 @@ static void mmc_power_up(struct mmc_host *host) void mmc_power_off(struct mmc_host *host) { - int err = 0; - if (host->ios.power_mode == MMC_POWER_OFF) return; @@ -1247,22 +1343,6 @@ void mmc_power_off(struct mmc_host *host) host->ios.clock = 0; host->ios.vdd = 0; - /* - * For eMMC 4.5 device send AWAKE command before - * POWER_OFF_NOTIFY command, because in sleep state - * eMMC 4.5 devices respond to only RESET and AWAKE cmd - */ - if (host->card && mmc_card_is_sleep(host->card) && - host->bus_ops->resume) { - err = host->bus_ops->resume(host); - - if (!err) - mmc_poweroff_notify(host); - else - pr_warning("%s: error %d during resume " - "(continue with poweroff sequence)\n", - mmc_hostname(host), err); - } /* * Reset ocr mask to be the highest possible voltage supported for @@ -2052,6 +2132,11 @@ void mmc_rescan(struct work_struct *work) if (host->rescan_disable) return; + /* If there is a non-removable card registered, only scan once */ + if ((host->caps & MMC_CAP_NONREMOVABLE) && host->rescan_entered) + return; + host->rescan_entered = 1; + mmc_bus_get(host); /* @@ -2327,9 +2412,14 @@ int mmc_suspend_host(struct mmc_host *host) mmc_bus_get(host); if (host->bus_ops && !host->bus_dead) { - - if (host->bus_ops->suspend) + if (host->bus_ops->suspend) { + if (mmc_card_doing_bkops(host->card)) { + err = mmc_stop_bkops(host->card); + if (err) + goto out; + } err = host->bus_ops->suspend(host); + } if (err == -ENOSYS || !host->bus_ops->resume) { /* @@ -2411,15 +2501,24 @@ int mmc_pm_notify(struct notifier_block *notify_block, struct mmc_host *host = container_of( notify_block, struct mmc_host, pm_notify); unsigned long flags; - + int err = 0; switch (mode) { case PM_HIBERNATION_PREPARE: case PM_SUSPEND_PREPARE: + if (host->card && mmc_card_mmc(host->card) && + mmc_card_doing_bkops(host->card)) { + err = mmc_stop_bkops(host->card); + if (err) { + pr_err("%s: didn't stop bkops\n", + mmc_hostname(host)); + return err; + } + mmc_card_clr_doing_bkops(host->card); + } spin_lock_irqsave(&host->lock, flags); host->rescan_disable = 1; - host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT; spin_unlock_irqrestore(&host->lock, flags); cancel_delayed_work_sync(&host->detect); @@ -2443,7 +2542,6 @@ int mmc_pm_notify(struct notifier_block *notify_block, spin_lock_irqsave(&host->lock, flags); host->rescan_disable = 0; - host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG; spin_unlock_irqrestore(&host->lock, flags); mmc_detect_change(host, 0); diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 9ab5b17d488a..d96c643dde1c 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -281,7 +281,7 @@ static int mmc_ext_csd_open(struct inode *inode, struct file *filp) if (err) goto out_free; - for (i = 511; i >= 0; i--) + for (i = 0; i < 512; i++) n += sprintf(buf + n, "%02x", ext_csd[i]); n += sprintf(buf + n, "\n"); BUG_ON(n != EXT_CSD_STR_LEN); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 396b25891bb9..7cc46382fd64 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -463,6 +463,17 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) } if (card->ext_csd.rev >= 5) { + /* check whether the eMMC card supports BKOPS */ + if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { + card->ext_csd.bkops = 1; + card->ext_csd.bkops_en = ext_csd[EXT_CSD_BKOPS_EN]; + card->ext_csd.raw_bkops_status = + ext_csd[EXT_CSD_BKOPS_STATUS]; + if (!card->ext_csd.bkops_en) + pr_info("%s: BKOPS_EN bit is not set\n", + mmc_hostname(card->host)); + } + /* check whether the eMMC card supports HPI */ if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) { card->ext_csd.hpi = 1; @@ -996,7 +1007,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * so check for success and update the flag */ if (!err) - card->poweroff_notify_state = MMC_POWERED_ON; + card->ext_csd.power_off_notification = EXT_CSD_POWER_ON; } /* @@ -1262,6 +1273,35 @@ err: return err; } +static int mmc_can_poweroff_notify(const struct mmc_card *card) +{ + return card && + mmc_card_mmc(card) && + (card->ext_csd.power_off_notification == EXT_CSD_POWER_ON); +} + +static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type) +{ + unsigned int timeout = card->ext_csd.generic_cmd6_time; + int err; + + /* Use EXT_CSD_POWER_OFF_SHORT as default notification type. */ + if (notify_type == EXT_CSD_POWER_OFF_LONG) + timeout = card->ext_csd.power_off_longtime; + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + notify_type, timeout); + if (err) + pr_err("%s: Power Off Notification timed out, %u\n", + mmc_hostname(card->host), timeout); + + /* Disable the power off notification after the switch operation. */ + card->ext_csd.power_off_notification = EXT_CSD_NO_POWER_NOTIFICATION; + + return err; +} + /* * Host is being removed. Free up the current card. */ @@ -1322,11 +1362,11 @@ static int mmc_suspend(struct mmc_host *host) BUG_ON(!host->card); mmc_claim_host(host); - if (mmc_card_can_sleep(host)) { + if (mmc_can_poweroff_notify(host->card)) + err = mmc_poweroff_notify(host->card, EXT_CSD_POWER_OFF_SHORT); + else if (mmc_card_can_sleep(host)) err = mmc_card_sleep(host); - if (!err) - mmc_card_set_sleep(host->card); - } else if (!mmc_host_is_spi(host)) + else if (!mmc_host_is_spi(host)) err = mmc_deselect_cards(host); host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); mmc_release_host(host); @@ -1348,11 +1388,7 @@ static int mmc_resume(struct mmc_host *host) BUG_ON(!host->card); mmc_claim_host(host); - if (mmc_card_is_sleep(host->card)) { - err = mmc_card_awake(host); - mmc_card_clr_sleep(host->card); - } else - err = mmc_init_card(host, host->ocr, host->card); + err = mmc_init_card(host, host->ocr, host->card); mmc_release_host(host); return err; @@ -1363,7 +1399,6 @@ static int mmc_power_restore(struct mmc_host *host) int ret; host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); - mmc_card_clr_sleep(host->card); mmc_claim_host(host); ret = mmc_init_card(host, host->ocr, host->card); mmc_release_host(host); diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 0ed2cc5f35b6..a0e172042e65 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -230,6 +230,10 @@ mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode) return 0; } +/* + * NOTE: void *buf, caller for the buf is required to use DMA-capable + * buffer or on-stack buffer (with some overhead in callee). + */ static int mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, u32 opcode, void *buf, unsigned len) @@ -239,13 +243,19 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, struct mmc_data data = {0}; struct scatterlist sg; void *data_buf; + int is_on_stack; - /* dma onto stack is unsafe/nonportable, but callers to this - * routine normally provide temporary on-stack buffers ... - */ - data_buf = kmalloc(len, GFP_KERNEL); - if (data_buf == NULL) - return -ENOMEM; + is_on_stack = object_is_on_stack(buf); + if (is_on_stack) { + /* + * dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + data_buf = kmalloc(len, GFP_KERNEL); + if (!data_buf) + return -ENOMEM; + } else + data_buf = buf; mrq.cmd = &cmd; mrq.data = &data; @@ -280,8 +290,10 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, mmc_wait_for_req(host, &mrq); - memcpy(buf, data_buf, len); - kfree(data_buf); + if (is_on_stack) { + memcpy(buf, data_buf, len); + kfree(data_buf); + } if (cmd.error) return cmd.error; @@ -294,24 +306,32 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, int mmc_send_csd(struct mmc_card *card, u32 *csd) { int ret, i; + u32 *csd_tmp; if (!mmc_host_is_spi(card->host)) return mmc_send_cxd_native(card->host, card->rca << 16, csd, MMC_SEND_CSD); - ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16); + csd_tmp = kmalloc(16, GFP_KERNEL); + if (!csd_tmp) + return -ENOMEM; + + ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd_tmp, 16); if (ret) - return ret; + goto err; for (i = 0;i < 4;i++) - csd[i] = be32_to_cpu(csd[i]); + csd[i] = be32_to_cpu(csd_tmp[i]); - return 0; +err: + kfree(csd_tmp); + return ret; } int mmc_send_cid(struct mmc_host *host, u32 *cid) { int ret, i; + u32 *cid_tmp; if (!mmc_host_is_spi(host)) { if (!host->card) @@ -320,14 +340,20 @@ int mmc_send_cid(struct mmc_host *host, u32 *cid) cid, MMC_SEND_CID); } - ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16); + cid_tmp = kmalloc(16, GFP_KERNEL); + if (!cid_tmp) + return -ENOMEM; + + ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid_tmp, 16); if (ret) - return ret; + goto err; for (i = 0;i < 4;i++) - cid[i] = be32_to_cpu(cid[i]); + cid[i] = be32_to_cpu(cid_tmp[i]); - return 0; +err: + kfree(cid_tmp); + return ret; } int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd) @@ -367,18 +393,19 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc) } /** - * mmc_switch - modify EXT_CSD register + * __mmc_switch - modify EXT_CSD register * @card: the MMC card associated with the data transfer * @set: cmd set values * @index: EXT_CSD register index * @value: value to program into EXT_CSD register * @timeout_ms: timeout (ms) for operation performed by register write, * timeout of zero implies maximum possible timeout + * @use_busy_signal: use the busy signal as response type * * Modifies the EXT_CSD register for selected card. */ -int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, - unsigned int timeout_ms) +int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, + unsigned int timeout_ms, bool use_busy_signal) { int err; struct mmc_command cmd = {0}; @@ -392,13 +419,23 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, (index << 16) | (value << 8) | set; - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.flags = MMC_CMD_AC; + if (use_busy_signal) + cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B; + else + cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1; + + cmd.cmd_timeout_ms = timeout_ms; err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); if (err) return err; + /* No need to check card status in case of unblocking command */ + if (!use_busy_signal) + return 0; + /* Must check status to be sure of no errors */ do { err = mmc_send_status(card, &status); @@ -423,6 +460,13 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, return 0; } +EXPORT_SYMBOL_GPL(__mmc_switch); + +int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, + unsigned int timeout_ms) +{ + return __mmc_switch(card, set, index, value, timeout_ms, true); +} EXPORT_SYMBOL_GPL(mmc_switch); int mmc_send_status(struct mmc_card *card, u32 *status) diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 236842ec955a..6bf68799fe97 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -193,14 +193,7 @@ static int sdio_bus_remove(struct device *dev) } #ifdef CONFIG_PM - -static int pm_no_operation(struct device *dev) -{ - return 0; -} - static const struct dev_pm_ops sdio_bus_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation) SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index 058242916cef..08c6b3dfe080 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -100,7 +100,13 @@ int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio) ctx = host->slot.handler_priv; - return gpio_request_one(gpio, GPIOF_DIR_IN, ctx->ro_label); + ret = gpio_request_one(gpio, GPIOF_DIR_IN, ctx->ro_label); + if (ret < 0) + return ret; + + ctx->ro_gpio = gpio; + + return 0; } EXPORT_SYMBOL(mmc_gpio_request_ro); diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index aa131b32e3b2..9bf10e7bbfaf 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -540,6 +540,15 @@ config MMC_DW_PLTFM If unsure, say Y. +config MMC_DW_EXYNOS + tristate "Exynos specific extentions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for Samsung Exynos SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Exynos4 and Exynos5 SoC's. + config MMC_DW_PCI tristate "Synopsys Designware MCI support on PCI bus" depends on MMC_DW && PCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 8922b06be925..17ad0a7ba40b 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o obj-$(CONFIG_MMC_DW) += dw_mmc.o obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o +obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index ab56f7db5315..c97001e15227 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -140,6 +140,13 @@ #define atmci_writel(port,reg,value) \ __raw_writel((value), (port)->regs + reg) +/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */ +#ifdef CONFIG_AVR32 +# define ATMCI_PDC_CONNECTED 0 +#else +# define ATMCI_PDC_CONNECTED 1 +#endif + /* * Fix sconfig's burst size according to atmel MCI. We need to convert them as: * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 852d5fbda630..ddf096e3803f 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -19,6 +19,9 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/scatterlist.h> #include <linux/seq_file.h> @@ -71,7 +74,7 @@ enum atmci_pdc_buf { }; struct atmel_mci_caps { - bool has_dma; + bool has_dma_conf_reg; bool has_pdc; bool has_cfg_reg; bool has_cstor_reg; @@ -418,7 +421,7 @@ static int atmci_regs_show(struct seq_file *s, void *v) atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]); atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]); - if (host->caps.has_dma) { + if (host->caps.has_dma_conf_reg) { u32 val; val = buf[ATMCI_DMA / 4]; @@ -500,6 +503,70 @@ err: dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); } +#if defined(CONFIG_OF) +static const struct of_device_id atmci_dt_ids[] = { + { .compatible = "atmel,hsmci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmci_dt_ids); + +static struct mci_platform_data __devinit* +atmci_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *cnp; + struct mci_platform_data *pdata; + u32 slot_id; + + if (!np) { + dev_err(&pdev->dev, "device node not found\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + for_each_child_of_node(np, cnp) { + if (of_property_read_u32(cnp, "reg", &slot_id)) { + dev_warn(&pdev->dev, "reg property is missing for %s\n", + cnp->full_name); + continue; + } + + if (slot_id >= ATMCI_MAX_NR_SLOTS) { + dev_warn(&pdev->dev, "can't have more than %d slots\n", + ATMCI_MAX_NR_SLOTS); + break; + } + + if (of_property_read_u32(cnp, "bus-width", + &pdata->slot[slot_id].bus_width)) + pdata->slot[slot_id].bus_width = 1; + + pdata->slot[slot_id].detect_pin = + of_get_named_gpio(cnp, "cd-gpios", 0); + + pdata->slot[slot_id].detect_is_active_high = + of_property_read_bool(cnp, "cd-inverted"); + + pdata->slot[slot_id].wp_pin = + of_get_named_gpio(cnp, "wp-gpios", 0); + } + + return pdata; +} +#else /* CONFIG_OF */ +static inline struct mci_platform_data* +atmci_of_init(struct platform_device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + static inline unsigned int atmci_get_version(struct atmel_mci *host) { return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; @@ -774,7 +841,7 @@ static void atmci_dma_complete(void *arg) dev_vdbg(&host->pdev->dev, "DMA complete\n"); - if (host->caps.has_dma) + if (host->caps.has_dma_conf_reg) /* Disable DMA hardware handshaking on MCI */ atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN); @@ -961,7 +1028,9 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); } - atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN); + if (host->caps.has_dma_conf_reg) + atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | + ATMCI_DMAEN); sglen = dma_map_sg(chan->device->dev, data->sg, data->sg_len, direction); @@ -2046,6 +2115,13 @@ static int __init atmci_init_slot(struct atmel_mci *host, slot->sdc_reg = sdc_reg; slot->sdio_irq = sdio_irq; + dev_dbg(&mmc->class_dev, + "slot[%u]: bus_width=%u, detect_pin=%d, " + "detect_is_active_high=%s, wp_pin=%d\n", + id, slot_data->bus_width, slot_data->detect_pin, + slot_data->detect_is_active_high ? "true" : "false", + slot_data->wp_pin); + mmc->ops = &atmci_ops; mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); mmc->f_max = host->bus_hz / 2; @@ -2169,7 +2245,10 @@ static bool atmci_configure_dma(struct atmel_mci *host) pdata = host->pdev->dev.platform_data; - if (pdata && find_slave_dev(pdata->dma_slave)) { + if (!pdata) + return false; + + if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) { dma_cap_mask_t mask; /* Try to grab a DMA channel */ @@ -2210,8 +2289,8 @@ static void __init atmci_get_cap(struct atmel_mci *host) dev_info(&host->pdev->dev, "version: 0x%x\n", version); - host->caps.has_dma = 0; - host->caps.has_pdc = 1; + host->caps.has_dma_conf_reg = 0; + host->caps.has_pdc = ATMCI_PDC_CONNECTED; host->caps.has_cfg_reg = 0; host->caps.has_cstor_reg = 0; host->caps.has_highspeed = 0; @@ -2228,12 +2307,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_odd_clk_div = 1; case 0x400: case 0x300: -#ifdef CONFIG_AT_HDMAC - host->caps.has_dma = 1; -#else - dev_info(&host->pdev->dev, - "has dma capability but dma engine is not selected, then use pio\n"); -#endif + host->caps.has_dma_conf_reg = 1; host->caps.has_pdc = 0; host->caps.has_cfg_reg = 1; host->caps.has_cstor_reg = 1; @@ -2268,8 +2342,14 @@ static int __init atmci_probe(struct platform_device *pdev) if (!regs) return -ENXIO; pdata = pdev->dev.platform_data; - if (!pdata) - return -ENXIO; + if (!pdata) { + pdata = atmci_of_init(pdev); + if (IS_ERR(pdata)) { + dev_err(&pdev->dev, "platform data not available\n"); + return PTR_ERR(pdata); + } + } + irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -2308,7 +2388,7 @@ static int __init atmci_probe(struct platform_device *pdev) /* Get MCI capabilities and set operations according to it */ atmci_get_cap(host); - if (host->caps.has_dma && atmci_configure_dma(host)) { + if (atmci_configure_dma(host)) { host->prepare_data = &atmci_prepare_data_dma; host->submit_data = &atmci_submit_data_dma; host->stop_transfer = &atmci_stop_transfer_dma; @@ -2487,6 +2567,7 @@ static struct platform_driver atmci_driver = { .driver = { .name = "atmel_mci", .pm = ATMCI_PM_OPS, + .of_match_table = of_match_ptr(atmci_dt_ids), }, }; diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index a17dd7363ceb..b9b463eca1ec 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -24,9 +24,7 @@ #include <asm/portmux.h> #include <asm/bfin_sdh.h> -#if defined(CONFIG_BF51x) -#define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL -#define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL +#if defined(CONFIG_BF51x) || defined(__ADSPBF60x__) #define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CTL #define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CTL #define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT @@ -45,8 +43,16 @@ #define bfin_write_SDH_E_STATUS bfin_write_RSI_E_STATUS #define bfin_read_SDH_STATUS bfin_read_RSI_STATUS #define bfin_write_SDH_MASK0 bfin_write_RSI_MASK0 +#define bfin_write_SDH_E_MASK bfin_write_RSI_E_MASK #define bfin_read_SDH_CFG bfin_read_RSI_CFG #define bfin_write_SDH_CFG bfin_write_RSI_CFG +# if defined(__ADSPBF60x__) +# define bfin_read_SDH_BLK_SIZE bfin_read_RSI_BLKSZ +# define bfin_write_SDH_BLK_SIZE bfin_write_RSI_BLKSZ +# else +# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL +# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL +# endif #endif struct sdh_host { @@ -62,6 +68,7 @@ struct sdh_host { dma_addr_t sg_dma; int dma_len; + unsigned long sclk; unsigned int imask; unsigned int power_mode; unsigned int clk_div; @@ -127,11 +134,15 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) /* Only supports power-of-2 block size */ if (data->blksz & (data->blksz - 1)) return -EINVAL; +#ifndef RSI_BLKSZ data_ctl |= ((ffs(data->blksz) - 1) << 4); +#else + bfin_write_SDH_BLK_SIZE(data->blksz); +#endif bfin_write_SDH_DATA_CTL(data_ctl); /* the time of a host clock period in ns */ - cycle_ns = 1000000000 / (get_sclk() / (2 * (host->clk_div + 1))); + cycle_ns = 1000000000 / (host->sclk / (2 * (host->clk_div + 1))); timeout = data->timeout_ns / cycle_ns; timeout += data->timeout_clks; bfin_write_SDH_DATA_TIMER(timeout); @@ -145,8 +156,13 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END)); host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir); -#if defined(CONFIG_BF54x) - dma_cfg |= DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_32 | DMAEN; +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) + dma_cfg |= DMAFLOW_ARRAY | RESTART | WDSIZE_32 | DMAEN; +# ifdef RSI_BLKSZ + dma_cfg |= PSIZE_32 | NDSIZE_3; +# else + dma_cfg |= NDSIZE_5; +# endif { struct scatterlist *sg; int i; @@ -156,7 +172,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) host->sg_cpu[i].x_count = sg_dma_len(sg) / 4; host->sg_cpu[i].x_modify = 4; dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, " - "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n", + "cfg:0x%lx, x_count:0x%lx, x_modify:0x%lx\n", i, host->sg_cpu[i].start_addr, host->sg_cpu[i].cfg, host->sg_cpu[i].x_count, host->sg_cpu[i].x_modify); @@ -172,6 +188,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) set_dma_curr_desc_addr(host->dma_ch, (unsigned long *)host->sg_dma); set_dma_x_count(host->dma_ch, 0); set_dma_x_modify(host->dma_ch, 0); + SSYNC(); set_dma_config(host->dma_ch, dma_cfg); #elif defined(CONFIG_BF51x) /* RSI DMA doesn't work in array mode */ @@ -179,6 +196,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0])); set_dma_x_count(host->dma_ch, length / 4); set_dma_x_modify(host->dma_ch, 4); + SSYNC(); set_dma_config(host->dma_ch, dma_cfg); #endif bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E); @@ -296,7 +314,6 @@ static int sdh_data_done(struct sdh_host *host, unsigned int stat) else data->bytes_xfered = 0; - sdh_disable_stat_irq(host, DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN); bfin_write_SDH_STATUS_CLR(DAT_END_STAT | DAT_TIMEOUT_STAT | \ DAT_CRC_FAIL_STAT | DAT_BLK_END_STAT | RX_OVERRUN | TX_UNDERRUN); bfin_write_SDH_DATA_CTL(0); @@ -321,74 +338,115 @@ static void sdh_request(struct mmc_host *mmc, struct mmc_request *mrq) dev_dbg(mmc_dev(host->mmc), "%s enter, mrp:%p, cmd:%p\n", __func__, mrq, mrq->cmd); WARN_ON(host->mrq != NULL); + spin_lock(&host->lock); host->mrq = mrq; host->data = mrq->data; if (mrq->data && mrq->data->flags & MMC_DATA_READ) { ret = sdh_setup_data(host, mrq->data); if (ret) - return; + goto data_err; } sdh_start_cmd(host, mrq->cmd); +data_err: + spin_unlock(&host->lock); } static void sdh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct sdh_host *host; - unsigned long flags; u16 clk_ctl = 0; +#ifndef RSI_BLKSZ u16 pwr_ctl = 0; +#endif u16 cfg; host = mmc_priv(mmc); - spin_lock_irqsave(&host->lock, flags); - if (ios->clock) { - unsigned long sys_clk, ios_clk; - unsigned char clk_div; - ios_clk = 2 * ios->clock; - sys_clk = get_sclk(); - clk_div = sys_clk / ios_clk; - if (sys_clk % ios_clk == 0) - clk_div -= 1; - clk_div = min_t(unsigned char, clk_div, 0xFF); - clk_ctl |= clk_div; - clk_ctl |= CLK_E; - host->clk_div = clk_div; - } else - sdh_stop_clock(host); - - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) -#ifdef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND - pwr_ctl |= ROD_CTL; -#else - pwr_ctl |= SD_CMD_OD | ROD_CTL; -#endif + spin_lock(&host->lock); - if (ios->bus_width == MMC_BUS_WIDTH_4) { - cfg = bfin_read_SDH_CFG(); + cfg = bfin_read_SDH_CFG(); + cfg |= MWE; + switch (ios->bus_width) { + case MMC_BUS_WIDTH_4: +#ifndef RSI_BLKSZ cfg &= ~PD_SDDAT3; +#endif cfg |= PUP_SDDAT3; /* Enable 4 bit SDIO */ - cfg |= (SD4E | MWE); - bfin_write_SDH_CFG(cfg); - clk_ctl |= WIDE_BUS; - } else { - cfg = bfin_read_SDH_CFG(); - cfg |= MWE; - bfin_write_SDH_CFG(cfg); + cfg |= SD4E; + clk_ctl |= WIDE_BUS_4; + break; + case MMC_BUS_WIDTH_8: +#ifndef RSI_BLKSZ + cfg &= ~PD_SDDAT3; +#endif + cfg |= PUP_SDDAT3; + /* Disable 4 bit SDIO */ + cfg &= ~SD4E; + clk_ctl |= BYTE_BUS_8; + break; + default: + cfg &= ~PUP_SDDAT3; + /* Disable 4 bit SDIO */ + cfg &= ~SD4E; } - bfin_write_SDH_CLK_CTL(clk_ctl); - host->power_mode = ios->power_mode; - if (ios->power_mode == MMC_POWER_ON) +#ifndef RSI_BLKSZ + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { + pwr_ctl |= ROD_CTL; +# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND + pwr_ctl |= SD_CMD_OD; +# endif + } + + if (ios->power_mode != MMC_POWER_OFF) pwr_ctl |= PWR_ON; + else + pwr_ctl &= ~PWR_ON; bfin_write_SDH_PWR_CTL(pwr_ctl); +#else +# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + cfg |= SD_CMD_OD; + else + cfg &= ~SD_CMD_OD; +# endif + + + if (ios->power_mode != MMC_POWER_OFF) + cfg |= PWR_ON; + else + cfg &= ~PWR_ON; + + bfin_write_SDH_CFG(cfg); +#endif SSYNC(); - spin_unlock_irqrestore(&host->lock, flags); + if (ios->power_mode == MMC_POWER_ON && ios->clock) { + unsigned char clk_div; + clk_div = (get_sclk() / ios->clock - 1) / 2; + clk_div = min_t(unsigned char, clk_div, 0xFF); + clk_ctl |= clk_div; + clk_ctl |= CLK_E; + host->clk_div = clk_div; + bfin_write_SDH_CLK_CTL(clk_ctl); + + } else + sdh_stop_clock(host); + + /* set up sdh interrupt mask*/ + if (ios->power_mode == MMC_POWER_ON) + bfin_write_SDH_MASK0(DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | + RX_OVERRUN | TX_UNDERRUN | CMD_SENT | CMD_RESP_END | + CMD_TIME_OUT | CMD_CRC_FAIL); + else + bfin_write_SDH_MASK0(0); + SSYNC(); + + spin_unlock(&host->lock); dev_dbg(mmc_dev(host->mmc), "SDH: clk_div = 0x%x actual clock:%ld expected clock:%d\n", host->clk_div, @@ -405,7 +463,7 @@ static irqreturn_t sdh_dma_irq(int irq, void *devid) { struct sdh_host *host = devid; - dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04x\n", __func__, + dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04lx\n", __func__, get_dma_curr_irqstat(host->dma_ch)); clear_dma_irqstat(host->dma_ch); SSYNC(); @@ -420,6 +478,9 @@ static irqreturn_t sdh_stat_irq(int irq, void *devid) int handled = 0; dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__); + + spin_lock(&host->lock); + status = bfin_read_SDH_E_STATUS(); if (status & SD_CARD_DET) { mmc_detect_change(host->mmc, 0); @@ -437,11 +498,30 @@ static irqreturn_t sdh_stat_irq(int irq, void *devid) if (status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN)) handled |= sdh_data_done(host, status); + spin_unlock(&host->lock); + dev_dbg(mmc_dev(host->mmc), "%s exit\n\n", __func__); return IRQ_RETVAL(handled); } +static void sdh_reset(void) +{ +#if defined(CONFIG_BF54x) + /* Secure Digital Host shares DMA with Nand controller */ + bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); +#endif + + bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); + SSYNC(); + + /* Disable card inserting detection pin. set MMC_CAP_NEEDS_POLL, and + * mmc stack will do the detection. + */ + bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3)); + SSYNC(); +} + static int __devinit sdh_probe(struct platform_device *pdev) { struct mmc_host *mmc; @@ -462,8 +542,16 @@ static int __devinit sdh_probe(struct platform_device *pdev) } mmc->ops = &sdh_ops; - mmc->max_segs = 32; +#if defined(CONFIG_BF51x) + mmc->max_segs = 1; +#else + mmc->max_segs = PAGE_SIZE / sizeof(struct dma_desc_array); +#endif +#ifdef RSI_BLKSZ + mmc->max_seg_size = -1; +#else mmc->max_seg_size = 1 << 16; +#endif mmc->max_blk_size = 1 << 11; mmc->max_blk_count = 1 << 11; mmc->max_req_size = PAGE_SIZE; @@ -473,6 +561,7 @@ static int __devinit sdh_probe(struct platform_device *pdev) mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL; host = mmc_priv(mmc); host->mmc = mmc; + host->sclk = get_sclk(); spin_lock_init(&host->lock); host->irq = drv_data->irq_int0; @@ -497,7 +586,6 @@ static int __devinit sdh_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, mmc); - mmc_add_host(mmc); ret = request_irq(host->irq, sdh_stat_irq, 0, "SDH Status IRQ", host); if (ret) { @@ -510,20 +598,10 @@ static int __devinit sdh_probe(struct platform_device *pdev) dev_err(&pdev->dev, "unable to request peripheral pins\n"); goto out4; } -#if defined(CONFIG_BF54x) - /* Secure Digital Host shares DMA with Nand controller */ - bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); -#endif - - bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); - SSYNC(); - /* Disable card inserting detection pin. set MMC_CAP_NEES_POLL, and - * mmc stack will do the detection. - */ - bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3)); - SSYNC(); + sdh_reset(); + mmc_add_host(mmc); return 0; out4: @@ -571,7 +649,6 @@ static int sdh_suspend(struct platform_device *dev, pm_message_t state) if (mmc) ret = mmc_suspend_host(mmc); - bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() & ~PWR_ON); peripheral_free_list(drv_data->pin_req); return ret; @@ -589,16 +666,7 @@ static int sdh_resume(struct platform_device *dev) return ret; } - bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() | PWR_ON); -#if defined(CONFIG_BF54x) - /* Secure Digital Host shares DMA with Nand controller */ - bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); -#endif - bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); - SSYNC(); - - bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3)); - SSYNC(); + sdh_reset(); if (mmc) ret = mmc_resume_host(mmc); diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 3dfd3473269d..20636772c09b 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -30,11 +30,12 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/delay.h> +#include <linux/dmaengine.h> #include <linux/dma-mapping.h> +#include <linux/edma.h> #include <linux/mmc/mmc.h> #include <linux/platform_data/mmc-davinci.h> -#include <mach/edma.h> /* * Register Definitions @@ -200,21 +201,13 @@ struct mmc_davinci_host { u32 bytes_left; u32 rxdma, txdma; + struct dma_chan *dma_tx; + struct dma_chan *dma_rx; bool use_dma; bool do_dma; bool sdio_int; bool active_request; - /* Scatterlist DMA uses one or more parameter RAM entries: - * the main one (associated with rxdma or txdma) plus zero or - * more links. The entries for a given transfer differ only - * by memory buffer (address, length) and link field. - */ - struct edmacc_param tx_template; - struct edmacc_param rx_template; - unsigned n_link; - u32 links[MAX_NR_SG - 1]; - /* For PIO we walk scatterlists one segment at a time. */ unsigned int sg_len; struct scatterlist *sg; @@ -410,153 +403,74 @@ static void mmc_davinci_start_command(struct mmc_davinci_host *host, static void davinci_abort_dma(struct mmc_davinci_host *host) { - int sync_dev; + struct dma_chan *sync_dev; if (host->data_dir == DAVINCI_MMC_DATADIR_READ) - sync_dev = host->rxdma; + sync_dev = host->dma_rx; else - sync_dev = host->txdma; - - edma_stop(sync_dev); - edma_clean_channel(sync_dev); -} - -static void -mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data); - -static void mmc_davinci_dma_cb(unsigned channel, u16 ch_status, void *data) -{ - if (DMA_COMPLETE != ch_status) { - struct mmc_davinci_host *host = data; - - /* Currently means: DMA Event Missed, or "null" transfer - * request was seen. In the future, TC errors (like bad - * addresses) might be presented too. - */ - dev_warn(mmc_dev(host->mmc), "DMA %s error\n", - (host->data->flags & MMC_DATA_WRITE) - ? "write" : "read"); - host->data->error = -EIO; - mmc_davinci_xfer_done(host, host->data); - } -} - -/* Set up tx or rx template, to be modified and updated later */ -static void __init mmc_davinci_dma_setup(struct mmc_davinci_host *host, - bool tx, struct edmacc_param *template) -{ - unsigned sync_dev; - const u16 acnt = 4; - const u16 bcnt = rw_threshold >> 2; - const u16 ccnt = 0; - u32 src_port = 0; - u32 dst_port = 0; - s16 src_bidx, dst_bidx; - s16 src_cidx, dst_cidx; - - /* - * A-B Sync transfer: each DMA request is for one "frame" of - * rw_threshold bytes, broken into "acnt"-size chunks repeated - * "bcnt" times. Each segment needs "ccnt" such frames; since - * we tell the block layer our mmc->max_seg_size limit, we can - * trust (later) that it's within bounds. - * - * The FIFOs are read/written in 4-byte chunks (acnt == 4) and - * EDMA will optimize memory operations to use larger bursts. - */ - if (tx) { - sync_dev = host->txdma; - - /* src_prt, ccnt, and link to be set up later */ - src_bidx = acnt; - src_cidx = acnt * bcnt; - - dst_port = host->mem_res->start + DAVINCI_MMCDXR; - dst_bidx = 0; - dst_cidx = 0; - } else { - sync_dev = host->rxdma; - - src_port = host->mem_res->start + DAVINCI_MMCDRR; - src_bidx = 0; - src_cidx = 0; - - /* dst_prt, ccnt, and link to be set up later */ - dst_bidx = acnt; - dst_cidx = acnt * bcnt; - } - - /* - * We can't use FIFO mode for the FIFOs because MMC FIFO addresses - * are not 256-bit (32-byte) aligned. So we use INCR, and the W8BIT - * parameter is ignored. - */ - edma_set_src(sync_dev, src_port, INCR, W8BIT); - edma_set_dest(sync_dev, dst_port, INCR, W8BIT); + sync_dev = host->dma_tx; - edma_set_src_index(sync_dev, src_bidx, src_cidx); - edma_set_dest_index(sync_dev, dst_bidx, dst_cidx); - - edma_set_transfer_params(sync_dev, acnt, bcnt, ccnt, 8, ABSYNC); - - edma_read_slot(sync_dev, template); - - /* don't bother with irqs or chaining */ - template->opt |= EDMA_CHAN_SLOT(sync_dev) << 12; + dmaengine_terminate_all(sync_dev); } -static void mmc_davinci_send_dma_request(struct mmc_davinci_host *host, +static int mmc_davinci_send_dma_request(struct mmc_davinci_host *host, struct mmc_data *data) { - struct edmacc_param *template; - int channel, slot; - unsigned link; - struct scatterlist *sg; - unsigned sg_len; - unsigned bytes_left = host->bytes_left; - const unsigned shift = ffs(rw_threshold) - 1; + struct dma_chan *chan; + struct dma_async_tx_descriptor *desc; + int ret = 0; if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) { - template = &host->tx_template; - channel = host->txdma; + struct dma_slave_config dma_tx_conf = { + .direction = DMA_MEM_TO_DEV, + .dst_addr = host->mem_res->start + DAVINCI_MMCDXR, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_maxburst = + rw_threshold / DMA_SLAVE_BUSWIDTH_4_BYTES, + }; + chan = host->dma_tx; + dmaengine_slave_config(host->dma_tx, &dma_tx_conf); + + desc = dmaengine_prep_slave_sg(host->dma_tx, + data->sg, + host->sg_len, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_dbg(mmc_dev(host->mmc), + "failed to allocate DMA TX descriptor"); + ret = -1; + goto out; + } } else { - template = &host->rx_template; - channel = host->rxdma; - } - - /* We know sg_len and ccnt will never be out of range because - * we told the mmc layer which in turn tells the block layer - * to ensure that it only hands us one scatterlist segment - * per EDMA PARAM entry. Update the PARAM - * entries needed for each segment of this scatterlist. - */ - for (slot = channel, link = 0, sg = data->sg, sg_len = host->sg_len; - sg_len-- != 0 && bytes_left; - sg = sg_next(sg), slot = host->links[link++]) { - u32 buf = sg_dma_address(sg); - unsigned count = sg_dma_len(sg); - - template->link_bcntrld = sg_len - ? (EDMA_CHAN_SLOT(host->links[link]) << 5) - : 0xffff; - - if (count > bytes_left) - count = bytes_left; - bytes_left -= count; - - if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) - template->src = buf; - else - template->dst = buf; - template->ccnt = count >> shift; - - edma_write_slot(slot, template); + struct dma_slave_config dma_rx_conf = { + .direction = DMA_DEV_TO_MEM, + .src_addr = host->mem_res->start + DAVINCI_MMCDRR, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = + rw_threshold / DMA_SLAVE_BUSWIDTH_4_BYTES, + }; + chan = host->dma_rx; + dmaengine_slave_config(host->dma_rx, &dma_rx_conf); + + desc = dmaengine_prep_slave_sg(host->dma_rx, + data->sg, + host->sg_len, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_dbg(mmc_dev(host->mmc), + "failed to allocate DMA RX descriptor"); + ret = -1; + goto out; + } } - if (host->version == MMC_CTLR_VERSION_2) - edma_clear_event(channel); + dmaengine_submit(desc); + dma_async_issue_pending(chan); - edma_start(channel); +out: + return ret; } static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host, @@ -564,6 +478,7 @@ static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host, { int i; int mask = rw_threshold - 1; + int ret = 0; host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, ((data->flags & MMC_DATA_WRITE) @@ -583,70 +498,48 @@ static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host, } host->do_dma = 1; - mmc_davinci_send_dma_request(host, data); + ret = mmc_davinci_send_dma_request(host, data); - return 0; + return ret; } static void __init_or_module davinci_release_dma_channels(struct mmc_davinci_host *host) { - unsigned i; - if (!host->use_dma) return; - for (i = 0; i < host->n_link; i++) - edma_free_slot(host->links[i]); - - edma_free_channel(host->txdma); - edma_free_channel(host->rxdma); + dma_release_channel(host->dma_tx); + dma_release_channel(host->dma_rx); } static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host) { - u32 link_size; - int r, i; - - /* Acquire master DMA write channel */ - r = edma_alloc_channel(host->txdma, mmc_davinci_dma_cb, host, - EVENTQ_DEFAULT); - if (r < 0) { - dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n", - "tx", r); - return r; - } - mmc_davinci_dma_setup(host, true, &host->tx_template); - - /* Acquire master DMA read channel */ - r = edma_alloc_channel(host->rxdma, mmc_davinci_dma_cb, host, - EVENTQ_DEFAULT); - if (r < 0) { - dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n", - "rx", r); - goto free_master_write; + int r; + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->dma_tx = + dma_request_channel(mask, edma_filter_fn, &host->txdma); + if (!host->dma_tx) { + dev_err(mmc_dev(host->mmc), "Can't get dma_tx channel\n"); + return -ENODEV; } - mmc_davinci_dma_setup(host, false, &host->rx_template); - /* Allocate parameter RAM slots, which will later be bound to a - * channel as needed to handle a scatterlist. - */ - link_size = min_t(unsigned, host->nr_sg, ARRAY_SIZE(host->links)); - for (i = 0; i < link_size; i++) { - r = edma_alloc_slot(EDMA_CTLR(host->txdma), EDMA_SLOT_ANY); - if (r < 0) { - dev_dbg(mmc_dev(host->mmc), "dma PaRAM alloc --> %d\n", - r); - break; - } - host->links[i] = r; + host->dma_rx = + dma_request_channel(mask, edma_filter_fn, &host->rxdma); + if (!host->dma_rx) { + dev_err(mmc_dev(host->mmc), "Can't get dma_rx channel\n"); + r = -ENODEV; + goto free_master_write; } - host->n_link = i; return 0; free_master_write: - edma_free_channel(host->txdma); + dma_release_channel(host->dma_tx); return r; } @@ -1359,7 +1252,7 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev) * Each hw_seg uses one EDMA parameter RAM slot, always one * channel and then usually some linked slots. */ - mmc->max_segs = 1 + host->n_link; + mmc->max_segs = MAX_NR_SG; /* EDMA limit per hw segment (one or two MBytes) */ mmc->max_seg_size = MAX_CCNT * rw_threshold; diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c new file mode 100644 index 000000000000..660bbc528862 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -0,0 +1,253 @@ +/* + * Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver + * + * Copyright (C) 2012, Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/mmc/dw_mmc.h> +#include <linux/of.h> +#include <linux/of_gpio.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +#define NUM_PINS(x) (x + 2) + +#define SDMMC_CLKSEL 0x09C +#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0) +#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16) +#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24) +#define SDMMC_CLKSEL_GET_DRV_WD3(x) (((x) >> 16) & 0x7) +#define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \ + SDMMC_CLKSEL_CCLK_DRIVE(y) | \ + SDMMC_CLKSEL_CCLK_DIVIDER(z)) + +#define SDMMC_CMD_USE_HOLD_REG BIT(29) + +#define EXYNOS4210_FIXED_CIU_CLK_DIV 2 +#define EXYNOS4412_FIXED_CIU_CLK_DIV 4 + +/* Variations in Exynos specific dw-mshc controller */ +enum dw_mci_exynos_type { + DW_MCI_TYPE_EXYNOS4210, + DW_MCI_TYPE_EXYNOS4412, + DW_MCI_TYPE_EXYNOS5250, +}; + +/* Exynos implementation specific driver private data */ +struct dw_mci_exynos_priv_data { + enum dw_mci_exynos_type ctrl_type; + u8 ciu_div; + u32 sdr_timing; + u32 ddr_timing; +}; + +static struct dw_mci_exynos_compatible { + char *compatible; + enum dw_mci_exynos_type ctrl_type; +} exynos_compat[] = { + { + .compatible = "samsung,exynos4210-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS4210, + }, { + .compatible = "samsung,exynos4412-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS4412, + }, { + .compatible = "samsung,exynos5250-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS5250, + }, +}; + +static int dw_mci_exynos_priv_init(struct dw_mci *host) +{ + struct dw_mci_exynos_priv_data *priv; + int idx; + + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(host->dev, "mem alloc failed for private data\n"); + return -ENOMEM; + } + + for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) { + if (of_device_is_compatible(host->dev->of_node, + exynos_compat[idx].compatible)) + priv->ctrl_type = exynos_compat[idx].ctrl_type; + } + + host->priv = priv; + return 0; +} + +static int dw_mci_exynos_setup_clock(struct dw_mci *host) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5250) + host->bus_hz /= (priv->ciu_div + 1); + else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412) + host->bus_hz /= EXYNOS4412_FIXED_CIU_CLK_DIV; + else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210) + host->bus_hz /= EXYNOS4210_FIXED_CIU_CLK_DIV; + + return 0; +} + +static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr) +{ + /* + * Exynos4412 and Exynos5250 extends the use of CMD register with the + * use of bit 29 (which is reserved on standard MSHC controllers) for + * optionally bypassing the HOLD register for command and data. The + * HOLD register should be bypassed in case there is no phase shift + * applied on CMD/DATA that is sent to the card. + */ + if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL))) + *cmdr |= SDMMC_CMD_USE_HOLD_REG; +} + +static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + + if (ios->timing == MMC_TIMING_UHS_DDR50) + mci_writel(host, CLKSEL, priv->ddr_timing); + else + mci_writel(host, CLKSEL, priv->sdr_timing); +} + +static int dw_mci_exynos_parse_dt(struct dw_mci *host) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + struct device_node *np = host->dev->of_node; + u32 timing[2]; + u32 div = 0; + int ret; + + of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div); + priv->ciu_div = div; + + ret = of_property_read_u32_array(np, + "samsung,dw-mshc-sdr-timing", timing, 2); + if (ret) + return ret; + + priv->sdr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div); + + ret = of_property_read_u32_array(np, + "samsung,dw-mshc-ddr-timing", timing, 2); + if (ret) + return ret; + + priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div); + return 0; +} + +static int dw_mci_exynos_setup_bus(struct dw_mci *host, + struct device_node *slot_np, u8 bus_width) +{ + int idx, gpio, ret; + + if (!slot_np) + return -EINVAL; + + /* cmd + clock + bus-width pins */ + for (idx = 0; idx < NUM_PINS(bus_width); idx++) { + gpio = of_get_gpio(slot_np, idx); + if (!gpio_is_valid(gpio)) { + dev_err(host->dev, "invalid gpio: %d\n", gpio); + return -EINVAL; + } + + ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus"); + if (ret) { + dev_err(host->dev, "gpio [%d] request failed\n", gpio); + return -EBUSY; + } + } + + gpio = of_get_named_gpio(slot_np, "wp-gpios", 0); + if (gpio_is_valid(gpio)) { + if (devm_gpio_request(host->dev, gpio, "dw-mci-wp")) + dev_info(host->dev, "gpio [%d] request failed\n", + gpio); + } else { + dev_info(host->dev, "wp gpio not available"); + host->pdata->quirks |= DW_MCI_QUIRK_NO_WRITE_PROTECT; + } + + if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) + return 0; + + gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0); + if (gpio_is_valid(gpio)) { + if (devm_gpio_request(host->dev, gpio, "dw-mci-cd")) + dev_err(host->dev, "gpio [%d] request failed\n", gpio); + } else { + dev_info(host->dev, "cd gpio not available"); + } + + return 0; +} + +/* Exynos5250 controller specific capabilities */ +static unsigned long exynos5250_dwmmc_caps[4] = { + MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR | + MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23, + MMC_CAP_CMD23, + MMC_CAP_CMD23, + MMC_CAP_CMD23, +}; + +static struct dw_mci_drv_data exynos5250_drv_data = { + .caps = exynos5250_dwmmc_caps, + .init = dw_mci_exynos_priv_init, + .setup_clock = dw_mci_exynos_setup_clock, + .prepare_command = dw_mci_exynos_prepare_command, + .set_ios = dw_mci_exynos_set_ios, + .parse_dt = dw_mci_exynos_parse_dt, + .setup_bus = dw_mci_exynos_setup_bus, +}; + +static const struct of_device_id dw_mci_exynos_match[] = { + { .compatible = "samsung,exynos5250-dw-mshc", + .data = (void *)&exynos5250_drv_data, }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); + +int dw_mci_exynos_probe(struct platform_device *pdev) +{ + struct dw_mci_drv_data *drv_data; + const struct of_device_id *match; + + match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node); + drv_data = match->data; + return dw_mci_pltfm_register(pdev, drv_data); +} + +static struct platform_driver dw_mci_exynos_pltfm_driver = { + .probe = dw_mci_exynos_probe, + .remove = __exit_p(dw_mci_pltfm_remove), + .driver = { + .name = "dwmmc_exynos", + .of_match_table = of_match_ptr(dw_mci_exynos_match), + .pm = &dw_mci_pltfm_pmops, + }, +}; + +module_platform_driver(dw_mci_exynos_pltfm_driver); + +MODULE_DESCRIPTION("Samsung Specific DW-MSHC Driver Extension"); +MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:dwmmc-exynos"); diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c index dc0d25a013e0..edb37e9135ae 100644 --- a/drivers/mmc/host/dw_mmc-pci.c +++ b/drivers/mmc/host/dw_mmc-pci.c @@ -59,7 +59,7 @@ static int __devinit dw_mci_pci_probe(struct pci_dev *pdev, host->irq = pdev->irq; host->irq_flags = IRQF_SHARED; - host->dev = pdev->dev; + host->dev = &pdev->dev; host->pdata = &pci_board_data; host->regs = pci_iomap(pdev, PCI_BAR_NO, COMPLETE_BAR); @@ -140,18 +140,7 @@ static struct pci_driver dw_mci_pci_driver = { }, }; -static int __init dw_mci_init(void) -{ - return pci_register_driver(&dw_mci_pci_driver); -} - -static void __exit dw_mci_exit(void) -{ - pci_unregister_driver(&dw_mci_pci_driver); -} - -module_init(dw_mci_init); -module_exit(dw_mci_exit); +module_pci_driver(dw_mci_pci_driver); MODULE_DESCRIPTION("DW Multimedia Card PCI Interface driver"); MODULE_AUTHOR("Shashidhar Hiremath <shashidharh@vayavyalabs.com>"); diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index 92ec3eb3aae7..c960ca7ffbe6 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -19,59 +19,63 @@ #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/dw_mmc.h> +#include <linux/of.h> + #include "dw_mmc.h" -static int dw_mci_pltfm_probe(struct platform_device *pdev) +int dw_mci_pltfm_register(struct platform_device *pdev, + struct dw_mci_drv_data *drv_data) { struct dw_mci *host; struct resource *regs; int ret; - host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL); + host = devm_kzalloc(&pdev->dev, sizeof(struct dw_mci), GFP_KERNEL); if (!host) return -ENOMEM; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - ret = -ENXIO; - goto err_free; - } + if (!regs) + return -ENXIO; host->irq = platform_get_irq(pdev, 0); - if (host->irq < 0) { - ret = host->irq; - goto err_free; - } + if (host->irq < 0) + return host->irq; - host->dev = pdev->dev; + host->drv_data = drv_data; + host->dev = &pdev->dev; host->irq_flags = 0; host->pdata = pdev->dev.platform_data; - ret = -ENOMEM; - host->regs = ioremap(regs->start, resource_size(regs)); + host->regs = devm_request_and_ioremap(&pdev->dev, regs); if (!host->regs) - goto err_free; + return -ENOMEM; + + if (host->drv_data->init) { + ret = host->drv_data->init(host); + if (ret) + return ret; + } + platform_set_drvdata(pdev, host); ret = dw_mci_probe(host); - if (ret) - goto err_out; - return ret; -err_out: - iounmap(host->regs); -err_free: - kfree(host); return ret; } +EXPORT_SYMBOL_GPL(dw_mci_pltfm_register); -static int __exit dw_mci_pltfm_remove(struct platform_device *pdev) +static int __devinit dw_mci_pltfm_probe(struct platform_device *pdev) +{ + return dw_mci_pltfm_register(pdev, NULL); +} + +static int __devexit dw_mci_pltfm_remove(struct platform_device *pdev) { struct dw_mci *host = platform_get_drvdata(pdev); platform_set_drvdata(pdev, NULL); dw_mci_remove(host); - iounmap(host->regs); - kfree(host); return 0; } +EXPORT_SYMBOL_GPL(dw_mci_pltfm_remove); #ifdef CONFIG_PM_SLEEP /* @@ -105,12 +109,20 @@ static int dw_mci_pltfm_resume(struct device *dev) #define dw_mci_pltfm_resume NULL #endif /* CONFIG_PM_SLEEP */ -static SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume); +SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume); +EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops); + +static const struct of_device_id dw_mci_pltfm_match[] = { + { .compatible = "snps,dw-mshc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); static struct platform_driver dw_mci_pltfm_driver = { .remove = __exit_p(dw_mci_pltfm_remove), .driver = { .name = "dw_mmc", + .of_match_table = of_match_ptr(dw_mci_pltfm_match), .pm = &dw_mci_pltfm_pmops, }, }; diff --git a/drivers/mmc/host/dw_mmc-pltfm.h b/drivers/mmc/host/dw_mmc-pltfm.h new file mode 100644 index 000000000000..301f24541fc2 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-pltfm.h @@ -0,0 +1,20 @@ +/* + * Synopsys DesignWare Multimedia Card Interface Platform driver + * + * Copyright (C) 2012, Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _DW_MMC_PLTFM_H_ +#define _DW_MMC_PLTFM_H_ + +extern int dw_mci_pltfm_register(struct platform_device *pdev, + struct dw_mci_drv_data *drv_data); +extern int __devexit dw_mci_pltfm_remove(struct platform_device *pdev); +extern const struct dev_pm_ops dw_mci_pltfm_pmops; + +#endif /* _DW_MMC_PLTFM_H_ */ diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index af40d227bece..c2828f35c3b8 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -33,6 +33,7 @@ #include <linux/bitops.h> #include <linux/regulator/consumer.h> #include <linux/workqueue.h> +#include <linux/of.h> #include "dw_mmc.h" @@ -230,6 +231,7 @@ static void dw_mci_set_timeout(struct dw_mci *host) static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd) { struct mmc_data *data; + struct dw_mci_slot *slot = mmc_priv(mmc); u32 cmdr; cmd->error = -EINPROGRESS; @@ -259,6 +261,9 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd) cmdr |= SDMMC_CMD_DAT_WR; } + if (slot->host->drv_data->prepare_command) + slot->host->drv_data->prepare_command(slot->host, &cmdr); + return cmdr; } @@ -266,7 +271,7 @@ static void dw_mci_start_command(struct dw_mci *host, struct mmc_command *cmd, u32 cmd_flags) { host->cmd = cmd; - dev_vdbg(&host->dev, + dev_vdbg(host->dev, "start command: ARGR=0x%08x CMDR=0x%08x\n", cmd->arg, cmd_flags); @@ -308,7 +313,7 @@ static void dw_mci_dma_cleanup(struct dw_mci *host) if (data) if (!data->host_cookie) - dma_unmap_sg(&host->dev, + dma_unmap_sg(host->dev, data->sg, data->sg_len, dw_mci_get_dma_dir(data)); @@ -334,7 +339,7 @@ static void dw_mci_idmac_complete_dma(struct dw_mci *host) { struct mmc_data *data = host->data; - dev_vdbg(&host->dev, "DMA complete\n"); + dev_vdbg(host->dev, "DMA complete\n"); host->dma_ops->cleanup(host); @@ -405,23 +410,11 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) static int dw_mci_idmac_init(struct dw_mci *host) { struct idmac_desc *p; - int i, dma_support; + int i; /* Number of descriptors in the ring buffer */ host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc); - /* Check if Hardware Configuration Register has support for DMA */ - dma_support = (mci_readl(host, HCON) >> 16) & 0x3; - - if (!dma_support || dma_support > 2) { - dev_err(&host->dev, - "Host Controller does not support IDMA Tx.\n"); - host->dma_ops = NULL; - return -ENODEV; - } - - dev_info(&host->dev, "Using internal DMA controller.\n"); - /* Forward link the descriptor list */ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1)); @@ -476,7 +469,7 @@ static int dw_mci_pre_dma_transfer(struct dw_mci *host, return -EINVAL; } - sg_len = dma_map_sg(&host->dev, + sg_len = dma_map_sg(host->dev, data->sg, data->sg_len, dw_mci_get_dma_dir(data)); @@ -519,7 +512,7 @@ static void dw_mci_post_req(struct mmc_host *mmc, return; if (data->host_cookie) - dma_unmap_sg(&slot->host->dev, + dma_unmap_sg(slot->host->dev, data->sg, data->sg_len, dw_mci_get_dma_dir(data)); @@ -545,7 +538,7 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) host->using_dma = 1; - dev_vdbg(&host->dev, + dev_vdbg(host->dev, "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma, sg_len); @@ -814,6 +807,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) slot->clock = ios->clock; } + if (slot->host->drv_data->set_ios) + slot->host->drv_data->set_ios(slot->host, ios); + switch (ios->power_mode) { case MMC_POWER_UP: set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags); @@ -830,7 +826,9 @@ static int dw_mci_get_ro(struct mmc_host *mmc) struct dw_mci_board *brd = slot->host->pdata; /* Use platform get_ro function, else try on board write protect */ - if (brd->get_ro) + if (brd->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT) + read_only = 0; + else if (brd->get_ro) read_only = brd->get_ro(slot->id); else read_only = @@ -939,12 +937,12 @@ static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq) slot = list_entry(host->queue.next, struct dw_mci_slot, queue_node); list_del(&slot->queue_node); - dev_vdbg(&host->dev, "list not empty: %s is next\n", + dev_vdbg(host->dev, "list not empty: %s is next\n", mmc_hostname(slot->mmc)); host->state = STATE_SENDING_CMD; dw_mci_start_request(host, slot); } else { - dev_vdbg(&host->dev, "list empty\n"); + dev_vdbg(host->dev, "list empty\n"); host->state = STATE_IDLE; } @@ -1083,7 +1081,7 @@ static void dw_mci_tasklet_func(unsigned long priv) data->bytes_xfered = 0; data->error = -ETIMEDOUT; } else { - dev_err(&host->dev, + dev_err(host->dev, "data FIFO error " "(status=%08x)\n", status); @@ -1767,12 +1765,60 @@ static void dw_mci_work_routine_card(struct work_struct *work) } } -static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) +#ifdef CONFIG_OF +/* given a slot id, find out the device node representing that slot */ +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) +{ + struct device_node *np; + const __be32 *addr; + int len; + + if (!dev || !dev->of_node) + return NULL; + + for_each_child_of_node(dev->of_node, np) { + addr = of_get_property(np, "reg", &len); + if (!addr || (len < sizeof(int))) + continue; + if (be32_to_cpup(addr) == slot) + return np; + } + return NULL; +} + +/* find out bus-width for a given slot */ +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) +{ + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); + u32 bus_wd = 1; + + if (!np) + return 1; + + if (of_property_read_u32(np, "bus-width", &bus_wd)) + dev_err(dev, "bus-width property not found, assuming width" + " as 1\n"); + return bus_wd; +} +#else /* CONFIG_OF */ +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) +{ + return 1; +} +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) +{ + return NULL; +} +#endif /* CONFIG_OF */ + +static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) { struct mmc_host *mmc; struct dw_mci_slot *slot; + int ctrl_id, ret; + u8 bus_width; - mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->dev); + mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev); if (!mmc) return -ENOMEM; @@ -1780,6 +1826,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) slot->id = id; slot->mmc = mmc; slot->host = host; + host->slot[id] = slot; mmc->ops = &dw_mci_ops; mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); @@ -1800,21 +1847,44 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) if (host->pdata->caps) mmc->caps = host->pdata->caps; + if (host->dev->of_node) { + ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); + if (ctrl_id < 0) + ctrl_id = 0; + } else { + ctrl_id = to_platform_device(host->dev)->id; + } + if (host->drv_data && host->drv_data->caps) + mmc->caps |= host->drv_data->caps[ctrl_id]; + if (host->pdata->caps2) mmc->caps2 = host->pdata->caps2; if (host->pdata->get_bus_wd) - if (host->pdata->get_bus_wd(slot->id) >= 4) - mmc->caps |= MMC_CAP_4_BIT_DATA; + bus_width = host->pdata->get_bus_wd(slot->id); + else if (host->dev->of_node) + bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id); + else + bus_width = 1; + + if (host->drv_data->setup_bus) { + struct device_node *slot_np; + slot_np = dw_mci_of_find_slot_node(host->dev, slot->id); + ret = host->drv_data->setup_bus(host, slot_np, bus_width); + if (ret) + goto err_setup_bus; + } + + switch (bus_width) { + case 8: + mmc->caps |= MMC_CAP_8_BIT_DATA; + case 4: + mmc->caps |= MMC_CAP_4_BIT_DATA; + } if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; - if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY) - mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT; - else - mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE; - if (host->pdata->blk_settings) { mmc->max_segs = host->pdata->blk_settings->max_segs; mmc->max_blk_size = host->pdata->blk_settings->max_blk_size; @@ -1850,7 +1920,6 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) else clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); - host->slot[id] = slot; mmc_add_host(mmc); #if defined(CONFIG_DEBUG_FS) @@ -1867,6 +1936,10 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) queue_work(host->card_workqueue, &host->card_work); return 0; + +err_setup_bus: + mmc_free_host(mmc); + return -EINVAL; } static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) @@ -1884,10 +1957,10 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) static void dw_mci_init_dma(struct dw_mci *host) { /* Alloc memory for sg translation */ - host->sg_cpu = dma_alloc_coherent(&host->dev, PAGE_SIZE, + host->sg_cpu = dma_alloc_coherent(host->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL); if (!host->sg_cpu) { - dev_err(&host->dev, "%s: could not alloc DMA memory\n", + dev_err(host->dev, "%s: could not alloc DMA memory\n", __func__); goto no_dma; } @@ -1895,6 +1968,7 @@ static void dw_mci_init_dma(struct dw_mci *host) /* Determine which DMA interface to use */ #ifdef CONFIG_MMC_DW_IDMAC host->dma_ops = &dw_mci_idmac_ops; + dev_info(&host->dev, "Using internal DMA controller.\n"); #endif if (!host->dma_ops) @@ -1903,12 +1977,12 @@ static void dw_mci_init_dma(struct dw_mci *host) if (host->dma_ops->init && host->dma_ops->start && host->dma_ops->stop && host->dma_ops->cleanup) { if (host->dma_ops->init(host)) { - dev_err(&host->dev, "%s: Unable to initialize " + dev_err(host->dev, "%s: Unable to initialize " "DMA Controller.\n", __func__); goto no_dma; } } else { - dev_err(&host->dev, "DMA initialization not found.\n"); + dev_err(host->dev, "DMA initialization not found.\n"); goto no_dma; } @@ -1916,7 +1990,7 @@ static void dw_mci_init_dma(struct dw_mci *host) return; no_dma: - dev_info(&host->dev, "Using PIO mode.\n"); + dev_info(host->dev, "Using PIO mode.\n"); host->use_dma = 0; return; } @@ -1942,30 +2016,133 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host) return false; } +#ifdef CONFIG_OF +static struct dw_mci_of_quirks { + char *quirk; + int id; +} of_quirks[] = { + { + .quirk = "supports-highspeed", + .id = DW_MCI_QUIRK_HIGHSPEED, + }, { + .quirk = "broken-cd", + .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + }, +}; + +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) +{ + struct dw_mci_board *pdata; + struct device *dev = host->dev; + struct device_node *np = dev->of_node; + int idx, ret; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + /* find out number of slots supported */ + if (of_property_read_u32(dev->of_node, "num-slots", + &pdata->num_slots)) { + dev_info(dev, "num-slots property not found, " + "assuming 1 slot is available\n"); + pdata->num_slots = 1; + } + + /* get quirks */ + for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++) + if (of_get_property(np, of_quirks[idx].quirk, NULL)) + pdata->quirks |= of_quirks[idx].id; + + if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth)) + dev_info(dev, "fifo-depth property not found, using " + "value of FIFOTH register as default\n"); + + of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); + + if (host->drv_data->parse_dt) { + ret = host->drv_data->parse_dt(host); + if (ret) + return ERR_PTR(ret); + } + + return pdata; +} + +#else /* CONFIG_OF */ +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) +{ + return ERR_PTR(-EINVAL); +} +#endif /* CONFIG_OF */ + int dw_mci_probe(struct dw_mci *host) { int width, i, ret = 0; u32 fifo_size; + int init_slots = 0; - if (!host->pdata || !host->pdata->init) { - dev_err(&host->dev, - "Platform data must supply init function\n"); - return -ENODEV; + if (!host->pdata) { + host->pdata = dw_mci_parse_dt(host); + if (IS_ERR(host->pdata)) { + dev_err(host->dev, "platform data not available\n"); + return -EINVAL; + } } if (!host->pdata->select_slot && host->pdata->num_slots > 1) { - dev_err(&host->dev, + dev_err(host->dev, "Platform data must supply select_slot function\n"); return -ENODEV; } - if (!host->pdata->bus_hz) { - dev_err(&host->dev, + host->biu_clk = clk_get(host->dev, "biu"); + if (IS_ERR(host->biu_clk)) { + dev_dbg(host->dev, "biu clock not available\n"); + } else { + ret = clk_prepare_enable(host->biu_clk); + if (ret) { + dev_err(host->dev, "failed to enable biu clock\n"); + clk_put(host->biu_clk); + return ret; + } + } + + host->ciu_clk = clk_get(host->dev, "ciu"); + if (IS_ERR(host->ciu_clk)) { + dev_dbg(host->dev, "ciu clock not available\n"); + } else { + ret = clk_prepare_enable(host->ciu_clk); + if (ret) { + dev_err(host->dev, "failed to enable ciu clock\n"); + clk_put(host->ciu_clk); + goto err_clk_biu; + } + } + + if (IS_ERR(host->ciu_clk)) + host->bus_hz = host->pdata->bus_hz; + else + host->bus_hz = clk_get_rate(host->ciu_clk); + + if (host->drv_data->setup_clock) { + ret = host->drv_data->setup_clock(host); + if (ret) { + dev_err(host->dev, + "implementation specific clock setup failed\n"); + goto err_clk_ciu; + } + } + + if (!host->bus_hz) { + dev_err(host->dev, "Platform data must supply bus speed\n"); - return -ENODEV; + ret = -ENODEV; + goto err_clk_ciu; } - host->bus_hz = host->pdata->bus_hz; host->quirks = host->pdata->quirks; spin_lock_init(&host->lock); @@ -1998,7 +2175,7 @@ int dw_mci_probe(struct dw_mci *host) } /* Reset all blocks */ - if (!mci_wait_reset(&host->dev, host)) + if (!mci_wait_reset(host->dev, host)) return -ENODEV; host->dma_ops = host->pdata->dma_ops; @@ -2054,10 +2231,18 @@ int dw_mci_probe(struct dw_mci *host) /* We need at least one slot to succeed */ for (i = 0; i < host->num_slots; i++) { ret = dw_mci_init_slot(host, i); - if (ret) { - ret = -ENODEV; - goto err_init_slot; - } + if (ret) + dev_dbg(host->dev, "slot %d init failed\n", i); + else + init_slots++; + } + + if (init_slots) { + dev_info(host->dev, "%d slots initialized\n", init_slots); + } else { + dev_dbg(host->dev, "attempted to initialize %d slots, " + "but failed on all\n", host->num_slots); + goto err_init_slot; } /* @@ -2065,7 +2250,7 @@ int dw_mci_probe(struct dw_mci *host) * Need to check the version-id and set data-offset for DATA register. */ host->verid = SDMMC_GET_VERID(mci_readl(host, VERID)); - dev_info(&host->dev, "Version ID is %04x\n", host->verid); + dev_info(host->dev, "Version ID is %04x\n", host->verid); if (host->verid < DW_MMC_240A) host->data_offset = DATA_OFFSET; @@ -2082,22 +2267,16 @@ int dw_mci_probe(struct dw_mci *host) DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */ - dev_info(&host->dev, "DW MMC controller at irq %d, " + dev_info(host->dev, "DW MMC controller at irq %d, " "%d bit host data width, " "%u deep fifo\n", host->irq, width, fifo_size); if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) - dev_info(&host->dev, "Internal DMAC interrupt fix enabled.\n"); + dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n"); return 0; err_init_slot: - /* De-init any initialized slots */ - while (i > 0) { - if (host->slot[i]) - dw_mci_cleanup_slot(host->slot[i], i); - i--; - } free_irq(host->irq, host); err_workqueue: @@ -2106,13 +2285,24 @@ err_workqueue: err_dmaunmap: if (host->use_dma && host->dma_ops->exit) host->dma_ops->exit(host); - dma_free_coherent(&host->dev, PAGE_SIZE, + dma_free_coherent(host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); if (host->vmmc) { regulator_disable(host->vmmc); regulator_put(host->vmmc); } + +err_clk_ciu: + if (!IS_ERR(host->ciu_clk)) { + clk_disable_unprepare(host->ciu_clk); + clk_put(host->ciu_clk); + } +err_clk_biu: + if (!IS_ERR(host->biu_clk)) { + clk_disable_unprepare(host->biu_clk); + clk_put(host->biu_clk); + } return ret; } EXPORT_SYMBOL(dw_mci_probe); @@ -2125,7 +2315,7 @@ void dw_mci_remove(struct dw_mci *host) mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ for (i = 0; i < host->num_slots; i++) { - dev_dbg(&host->dev, "remove slot %d\n", i); + dev_dbg(host->dev, "remove slot %d\n", i); if (host->slot[i]) dw_mci_cleanup_slot(host->slot[i], i); } @@ -2136,7 +2326,7 @@ void dw_mci_remove(struct dw_mci *host) free_irq(host->irq, host); destroy_workqueue(host->card_workqueue); - dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); + dma_free_coherent(host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); if (host->use_dma && host->dma_ops->exit) host->dma_ops->exit(host); @@ -2146,6 +2336,12 @@ void dw_mci_remove(struct dw_mci *host) regulator_put(host->vmmc); } + if (!IS_ERR(host->ciu_clk)) + clk_disable_unprepare(host->ciu_clk); + if (!IS_ERR(host->biu_clk)) + clk_disable_unprepare(host->biu_clk); + clk_put(host->ciu_clk); + clk_put(host->biu_clk); } EXPORT_SYMBOL(dw_mci_remove); @@ -2188,7 +2384,7 @@ int dw_mci_resume(struct dw_mci *host) if (host->vmmc) regulator_enable(host->vmmc); - if (!mci_wait_reset(&host->dev, host)) { + if (!mci_wait_reset(host->dev, host)) { ret = -ENODEV; return ret; } diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 15c27e17c23f..53b8fd987e47 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -182,4 +182,28 @@ extern int dw_mci_suspend(struct dw_mci *host); extern int dw_mci_resume(struct dw_mci *host); #endif +/** + * dw_mci driver data - dw-mshc implementation specific driver data. + * @caps: mmc subsystem specified capabilities of the controller(s). + * @init: early implementation specific initialization. + * @setup_clock: implementation specific clock configuration. + * @prepare_command: handle CMD register extensions. + * @set_ios: handle bus specific extensions. + * @parse_dt: parse implementation specific device tree properties. + * @setup_bus: initialize io-interface + * + * Provide controller implementation specific extensions. The usage of this + * data structure is fully optional and usage of each member in this structure + * is optional as well. + */ +struct dw_mci_drv_data { + unsigned long *caps; + int (*init)(struct dw_mci *host); + int (*setup_clock)(struct dw_mci *host); + void (*prepare_command)(struct dw_mci *host, u32 *cmdr); + void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios); + int (*parse_dt)(struct dw_mci *host); + int (*setup_bus)(struct dw_mci *host, + struct device_node *slot_np, u8 bus_width); +}; #endif /* _DW_MMC_H_ */ diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 273306c68d58..a600eabbd6c3 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1532,20 +1532,7 @@ static struct spi_driver mmc_spi_driver = { .remove = __devexit_p(mmc_spi_remove), }; - -static int __init mmc_spi_init(void) -{ - return spi_register_driver(&mmc_spi_driver); -} -module_init(mmc_spi_init); - - -static void __exit mmc_spi_exit(void) -{ - spi_unregister_driver(&mmc_spi_driver); -} -module_exit(mmc_spi_exit); - +module_spi_driver(mmc_spi_driver); MODULE_AUTHOR("Mike Lavender, David Brownell, " "Hans-Peter Nilsson, Jan Nikitenko"); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 50ff19a62368..edc3e9baf0e7 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1309,14 +1309,10 @@ static int __devinit mmci_probe(struct amba_device *dev, goto host_free; } - ret = clk_prepare(host->clk); + ret = clk_prepare_enable(host->clk); if (ret) goto clk_free; - ret = clk_enable(host->clk); - if (ret) - goto clk_unprep; - host->plat = plat; host->variant = variant; host->mclk = clk_get_rate(host->clk); @@ -1515,9 +1511,7 @@ static int __devinit mmci_probe(struct amba_device *dev, err_gpio_cd: iounmap(host->base); clk_disable: - clk_disable(host->clk); - clk_unprep: - clk_unprepare(host->clk); + clk_disable_unprepare(host->clk); clk_free: clk_put(host->clk); host_free: @@ -1564,8 +1558,7 @@ static int __devexit mmci_remove(struct amba_device *dev) gpio_free(host->gpio_cd); iounmap(host->base); - clk_disable(host->clk); - clk_unprepare(host->clk); + clk_disable_unprepare(host->clk); clk_put(host->clk); if (host->vcc) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 7b1161de01d6..565c2e4fac75 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -44,6 +44,7 @@ #include <mach/hardware.h> #define DRIVER_NAME "mxc-mmc" +#define MXCMCI_TIMEOUT_MS 10000 #define MMC_REG_STR_STP_CLK 0x00 #define MMC_REG_STATUS 0x04 @@ -150,6 +151,8 @@ struct mxcmci_host { int dmareq; struct dma_slave_config dma_slave_config; struct imx_dma_data dma_data; + + struct timer_list watchdog; }; static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios); @@ -271,9 +274,32 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) dmaengine_submit(host->desc); dma_async_issue_pending(host->dma); + mod_timer(&host->watchdog, jiffies + msecs_to_jiffies(MXCMCI_TIMEOUT_MS)); + return 0; } +static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat); +static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat); + +static void mxcmci_dma_callback(void *data) +{ + struct mxcmci_host *host = data; + u32 stat; + + del_timer(&host->watchdog); + + stat = readl(host->base + MMC_REG_STATUS); + writel(stat & ~STATUS_DATA_TRANS_DONE, host->base + MMC_REG_STATUS); + + dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat); + + if (stat & STATUS_READ_OP_DONE) + writel(STATUS_READ_OP_DONE, host->base + MMC_REG_STATUS); + + mxcmci_data_done(host, stat); +} + static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, unsigned int cmdat) { @@ -305,8 +331,14 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, int_cntr = INT_END_CMD_RES_EN; - if (mxcmci_use_dma(host)) - int_cntr |= INT_READ_OP_EN | INT_WRITE_OP_DONE_EN; + if (mxcmci_use_dma(host)) { + if (host->dma_dir == DMA_FROM_DEVICE) { + host->desc->callback = mxcmci_dma_callback; + host->desc->callback_param = host; + } else { + int_cntr |= INT_WRITE_OP_DONE_EN; + } + } spin_lock_irqsave(&host->lock, flags); if (host->use_sdio) @@ -345,11 +377,9 @@ static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat) struct mmc_data *data = host->data; int data_error; - if (mxcmci_use_dma(host)) { - dmaengine_terminate_all(host->dma); + if (mxcmci_use_dma(host)) dma_unmap_sg(host->dma->device->dev, data->sg, data->sg_len, host->dma_dir); - } if (stat & STATUS_ERR_MASK) { dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", @@ -624,8 +654,10 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) mxcmci_cmd_done(host, stat); if (mxcmci_use_dma(host) && - (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) + (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) { + del_timer(&host->watchdog); mxcmci_data_done(host, stat); + } if (host->default_irq_mask && (stat & (STATUS_CARD_INSERTION | STATUS_CARD_REMOVAL))) @@ -836,6 +868,34 @@ static bool filter(struct dma_chan *chan, void *param) return true; } +static void mxcmci_watchdog(unsigned long data) +{ + struct mmc_host *mmc = (struct mmc_host *)data; + struct mxcmci_host *host = mmc_priv(mmc); + struct mmc_request *req = host->req; + unsigned int stat = readl(host->base + MMC_REG_STATUS); + + if (host->dma_dir == DMA_FROM_DEVICE) { + dmaengine_terminate_all(host->dma); + dev_err(mmc_dev(host->mmc), + "%s: read time out (status = 0x%08x)\n", + __func__, stat); + } else { + dev_err(mmc_dev(host->mmc), + "%s: write time out (status = 0x%08x)\n", + __func__, stat); + mxcmci_softreset(host); + } + + /* Mark transfer as erroneus and inform the upper layers */ + + host->data->error = -ETIMEDOUT; + host->req = NULL; + host->cmd = NULL; + host->data = NULL; + mmc_request_done(host->mmc, req); +} + static const struct mmc_host_ops mxcmci_ops = { .request = mxcmci_request, .set_ios = mxcmci_set_ios, @@ -968,6 +1028,10 @@ static int mxcmci_probe(struct platform_device *pdev) mmc_add_host(mmc); + init_timer(&host->watchdog); + host->watchdog.function = &mxcmci_watchdog; + host->watchdog.data = (unsigned long)mmc; + return 0; out_free_irq: diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index c6259a829544..48ad361613ef 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -27,16 +27,10 @@ #include <linux/mmc/card.h> #include <linux/clk.h> #include <linux/scatterlist.h> -#include <linux/i2c/tps65010.h> #include <linux/slab.h> -#include <asm/io.h> -#include <asm/irq.h> - #include <plat/mmc.h> -#include <asm/gpio.h> #include <plat/dma.h> -#include <plat/fpga.h> #define OMAP_MMC_REG_CMD 0x00 #define OMAP_MMC_REG_ARGL 0x01 @@ -105,7 +99,6 @@ struct mmc_omap_slot { u16 saved_con; u16 bus_mode; unsigned int fclk_freq; - unsigned powered:1; struct tasklet_struct cover_tasklet; struct timer_list cover_timer; @@ -137,7 +130,6 @@ struct mmc_omap_host { unsigned int phys_base; int irq; unsigned char bus_mode; - unsigned char hw_bus_mode; unsigned int reg_shift; struct work_struct cmd_abort_work; @@ -695,22 +687,29 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) host->buffer += nwords; } -static inline void mmc_omap_report_irq(u16 status) +#ifdef CONFIG_MMC_DEBUG +static void mmc_omap_report_irq(struct mmc_omap_host *host, u16 status) { static const char *mmc_omap_status_bits[] = { "EOC", "CD", "CB", "BRS", "EOFB", "DTO", "DCRC", "CTO", "CCRC", "CRW", "AF", "AE", "OCRB", "CIRQ", "CERR" }; - int i, c = 0; + int i; + char res[64], *buf = res; + + buf += sprintf(buf, "MMC IRQ 0x%x:", status); for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++) - if (status & (1 << i)) { - if (c) - printk(" "); - printk("%s", mmc_omap_status_bits[i]); - c++; - } + if (status & (1 << i)) + buf += sprintf(buf, " %s", mmc_omap_status_bits[i]); + dev_vdbg(mmc_dev(host->mmc), "%s\n", res); } +#else +static void mmc_omap_report_irq(struct mmc_omap_host *host, u16 status) +{ +} +#endif + static irqreturn_t mmc_omap_irq(int irq, void *dev_id) { @@ -744,12 +743,10 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) cmd = host->cmd->opcode; else cmd = -1; -#ifdef CONFIG_MMC_DEBUG dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ", status, cmd); - mmc_omap_report_irq(status); - printk("\n"); -#endif + mmc_omap_report_irq(host, status); + if (host->total_bytes_left) { if ((status & OMAP_MMC_STAT_A_FULL) || (status & OMAP_MMC_STAT_END_OF_DATA)) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 38adc330c007..54bfd0cc106b 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -35,7 +35,6 @@ #include <linux/mmc/core.h> #include <linux/mmc/mmc.h> #include <linux/io.h> -#include <linux/semaphore.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> @@ -44,7 +43,6 @@ #include <plat/cpu.h> /* OMAP HSMMC Host Controller Registers */ -#define OMAP_HSMMC_SYSCONFIG 0x0010 #define OMAP_HSMMC_SYSSTATUS 0x0014 #define OMAP_HSMMC_CON 0x002C #define OMAP_HSMMC_BLK 0x0104 @@ -161,8 +159,6 @@ struct omap_hsmmc_host { unsigned int dma_sg_idx; unsigned char bus_mode; unsigned char power_mode; - u32 *buffer; - u32 bytesleft; int suspended; int irq; int use_dma, dma_ch; @@ -171,7 +167,6 @@ struct omap_hsmmc_host { int slot_id; int response_busy; int context_loss; - int vdd; int protect_card; int reqs_blocked; int use_reg; @@ -300,12 +295,12 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) struct regulator *reg; int ocr_value = 0; - mmc_slot(host).set_power = omap_hsmmc_set_power; - reg = regulator_get(host->dev, "vmmc"); if (IS_ERR(reg)) { dev_dbg(host->dev, "vmmc regulator missing\n"); + return PTR_ERR(reg); } else { + mmc_slot(host).set_power = omap_hsmmc_set_power; host->vcc = reg; ocr_value = mmc_regulator_get_ocrmask(reg); if (!mmc_slot(host).ocr_mask) { @@ -495,7 +490,7 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host) unsigned long regval; unsigned long timeout; - dev_dbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock); + dev_vdbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock); omap_hsmmc_stop_clock(host); @@ -579,21 +574,8 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) if (host->context_loss == context_loss) return 1; - /* Wait for hardware reset */ - timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); - while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE - && time_before(jiffies, timeout)) - ; - - /* Do software reset */ - OMAP_HSMMC_WRITE(host->base, SYSCONFIG, SOFTRESET); - timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); - while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE - && time_before(jiffies, timeout)) - ; - - OMAP_HSMMC_WRITE(host->base, SYSCONFIG, - OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); + if (!OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) + return 1; if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { if (host->power_mode != MMC_POWER_OFF && @@ -745,7 +727,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, { int cmdreg = 0, resptype = 0, cmdtype = 0; - dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", + dev_vdbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", mmc_hostname(host->mmc), cmd->opcode, cmd->arg); host->cmd = cmd; @@ -934,7 +916,7 @@ static void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host, u32 status) buf += len; } - dev_dbg(mmc_dev(host->mmc), "%s\n", res); + dev_vdbg(mmc_dev(host->mmc), "%s\n", res); } #else static inline void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host, @@ -981,72 +963,40 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, __func__); } +static void hsmmc_command_incomplete(struct omap_hsmmc_host *host, int err) +{ + omap_hsmmc_reset_controller_fsm(host, SRC); + host->cmd->error = err; + + if (host->data) { + omap_hsmmc_reset_controller_fsm(host, SRD); + omap_hsmmc_dma_cleanup(host, err); + } + +} + static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) { struct mmc_data *data; int end_cmd = 0, end_trans = 0; - if (!host->req_in_progress) { - do { - OMAP_HSMMC_WRITE(host->base, STAT, status); - /* Flush posted write */ - status = OMAP_HSMMC_READ(host->base, STAT); - } while (status & INT_EN_MASK); - return; - } - data = host->data; - dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); + dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); if (status & ERR) { omap_hsmmc_dbg_report_irq(host, status); - if ((status & CMD_TIMEOUT) || - (status & CMD_CRC)) { - if (host->cmd) { - if (status & CMD_TIMEOUT) { - omap_hsmmc_reset_controller_fsm(host, - SRC); - host->cmd->error = -ETIMEDOUT; - } else { - host->cmd->error = -EILSEQ; - } - end_cmd = 1; - } - if (host->data || host->response_busy) { - if (host->data) - omap_hsmmc_dma_cleanup(host, - -ETIMEDOUT); - host->response_busy = 0; - omap_hsmmc_reset_controller_fsm(host, SRD); - } - } - if ((status & DATA_TIMEOUT) || - (status & DATA_CRC)) { - if (host->data || host->response_busy) { - int err = (status & DATA_TIMEOUT) ? - -ETIMEDOUT : -EILSEQ; - - if (host->data) - omap_hsmmc_dma_cleanup(host, err); - else - host->mrq->cmd->error = err; - host->response_busy = 0; - omap_hsmmc_reset_controller_fsm(host, SRD); - end_trans = 1; - } - } - if (status & CARD_ERR) { - dev_dbg(mmc_dev(host->mmc), - "Ignoring card err CMD%d\n", host->cmd->opcode); - if (host->cmd) - end_cmd = 1; - if (host->data) - end_trans = 1; + if (status & (CMD_TIMEOUT | DATA_TIMEOUT)) + hsmmc_command_incomplete(host, -ETIMEDOUT); + else if (status & (CMD_CRC | DATA_CRC)) + hsmmc_command_incomplete(host, -EILSEQ); + + end_cmd = 1; + if (host->data || host->response_busy) { + end_trans = 1; + host->response_busy = 0; } } - OMAP_HSMMC_WRITE(host->base, STAT, status); - if (end_cmd || ((status & CC) && host->cmd)) omap_hsmmc_cmd_done(host, host->cmd); if ((end_trans || (status & TC)) && host->mrq) @@ -1062,11 +1012,13 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) int status; status = OMAP_HSMMC_READ(host->base, STAT); - do { + while (status & INT_EN_MASK && host->req_in_progress) { omap_hsmmc_do_irq(host, status); + /* Flush posted write */ + OMAP_HSMMC_WRITE(host->base, STAT, status); status = OMAP_HSMMC_READ(host->base, STAT); - } while (status & INT_EN_MASK); + } return IRQ_HANDLED; } @@ -1501,12 +1453,10 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); - host->vdd = 0; break; case MMC_POWER_UP: mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd); - host->vdd = ios->vdd; break; case MMC_POWER_ON: do_send_init_stream = 1; @@ -1598,10 +1548,6 @@ static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) value = OMAP_HSMMC_READ(host->base, CAPA); OMAP_HSMMC_WRITE(host->base, CAPA, value | capa); - /* Set the controller to AUTO IDLE mode */ - value = OMAP_HSMMC_READ(host->base, SYSCONFIG); - OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE); - /* Set SD bus power bit */ set_sd_bus_power(host); } @@ -1659,8 +1605,6 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data) pm_runtime_get_sync(host->dev); - seq_printf(s, "SYSCONFIG:\t0x%08x\n", - OMAP_HSMMC_READ(host->base, SYSCONFIG)); seq_printf(s, "CON:\t\t0x%08x\n", OMAP_HSMMC_READ(host->base, CON)); seq_printf(s, "HCTL:\t\t0x%08x\n", @@ -2105,8 +2049,7 @@ static int omap_hsmmc_suspend(struct device *dev) if (ret) { host->suspended = 0; if (host->pdata->resume) { - ret = host->pdata->resume(dev, host->slot_id); - if (ret) + if (host->pdata->resume(dev, host->slot_id)) dev_dbg(dev, "Unmask interrupt failed\n"); } goto err; diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index ca3915dac03d..3f9d6d577a91 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -30,6 +30,9 @@ #include <linux/regulator/consumer.h> #include <linux/gpio.h> #include <linux/gfp.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> #include <asm/sizes.h> @@ -573,6 +576,50 @@ static irqreturn_t pxamci_detect_irq(int irq, void *devid) return IRQ_HANDLED; } +#ifdef CONFIG_OF +static const struct of_device_id pxa_mmc_dt_ids[] = { + { .compatible = "marvell,pxa-mmc" }, + { } +}; + +MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids); + +static int __devinit pxamci_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pxamci_platform_data *pdata; + u32 tmp; + + if (!np) + return 0; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->gpio_card_detect = + of_get_named_gpio(np, "cd-gpios", 0); + pdata->gpio_card_ro = + of_get_named_gpio(np, "wp-gpios", 0); + + /* pxa-mmc specific */ + pdata->gpio_power = + of_get_named_gpio(np, "pxa-mmc,gpio-power", 0); + + if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0) + pdata->detect_delay_ms = tmp; + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static int __devinit pxamci_of_init(struct platform_device *pdev) +{ + return 0; +} +#endif + static int pxamci_probe(struct platform_device *pdev) { struct mmc_host *mmc; @@ -580,6 +627,10 @@ static int pxamci_probe(struct platform_device *pdev) struct resource *r, *dmarx, *dmatx; int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1; + ret = pxamci_of_init(pdev); + if (ret) + return ret; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); if (!r || irq < 0) @@ -866,6 +917,7 @@ static struct platform_driver pxamci_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pxa_mmc_dt_ids), #ifdef CONFIG_PM .pm = &pxamci_pm_ops, #endif diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c index a6e53a1ebb08..90140eb03e36 100644 --- a/drivers/mmc/host/sdhci-dove.c +++ b/drivers/mmc/host/sdhci-dove.c @@ -24,6 +24,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/mmc/host.h> +#include <linux/of.h> #include "sdhci-pltfm.h" @@ -126,11 +127,18 @@ static int __devexit sdhci_dove_remove(struct platform_device *pdev) return sdhci_pltfm_unregister(pdev); } +static const struct of_device_id sdhci_dove_of_match_table[] __devinitdata = { + { .compatible = "marvell,dove-sdhci", }, + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_dove_of_match_table); + static struct platform_driver sdhci_dove_driver = { .driver = { .name = "sdhci-dove", .owner = THIS_MODULE, .pm = SDHCI_PLTFM_PMOPS, + .of_match_table = of_match_ptr(sdhci_dove_of_match_table), }, .probe = sdhci_dove_probe, .remove = __devexit_p(sdhci_dove_remove), diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index f8eb1fb0c921..ae5fcbfa1eef 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -21,6 +21,32 @@ #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" +#define VENDOR_V_22 0x12 +static u32 esdhc_readl(struct sdhci_host *host, int reg) +{ + u32 ret; + + ret = in_be32(host->ioaddr + reg); + /* + * The bit of ADMA flag in eSDHC is not compatible with standard + * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is + * supported by eSDHC. + * And for many FSL eSDHC controller, the reset value of field + * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA, + * only these vendor version is greater than 2.2/0x12 support ADMA. + * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the + * the verdor version number, oxFE is SDHCI_HOST_VERSION. + */ + if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) { + u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); + tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; + if (tmp > VENDOR_V_22) + ret |= SDHCI_CAN_DO_ADMA2; + } + + return ret; +} + static u16 esdhc_readw(struct sdhci_host *host, int reg) { u16 ret; @@ -144,7 +170,7 @@ static void esdhc_of_resume(struct sdhci_host *host) #endif static struct sdhci_ops sdhci_esdhc_ops = { - .read_l = sdhci_be32bs_readl, + .read_l = esdhc_readl, .read_w = esdhc_readw, .read_b = esdhc_readb, .write_l = sdhci_be32bs_writel, @@ -161,9 +187,13 @@ static struct sdhci_ops sdhci_esdhc_ops = { }; static struct sdhci_pltfm_data sdhci_esdhc_pdata = { - /* card detection could be handled via GPIO */ + /* + * card detection could be handled via GPIO + * eSDHC cannot support End Attribute in NOP ADMA descriptor + */ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION - | SDHCI_QUIRK_NO_CARD_NO_RESET, + | SDHCI_QUIRK_NO_CARD_NO_RESET + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, .ops = &sdhci_esdhc_ops, }; diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 9722d43d6140..4bb74b042a06 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -1476,24 +1476,7 @@ static struct pci_driver sdhci_driver = { }, }; -/*****************************************************************************\ - * * - * Driver init/exit * - * * -\*****************************************************************************/ - -static int __init sdhci_drv_init(void) -{ - return pci_register_driver(&sdhci_driver); -} - -static void __exit sdhci_drv_exit(void) -{ - pci_unregister_driver(&sdhci_driver); -} - -module_init(sdhci_drv_init); -module_exit(sdhci_drv_exit); +module_pci_driver(sdhci_driver); MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver"); diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index d9a4ef4f1ed0..65551a9709cc 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -75,6 +75,9 @@ void sdhci_get_of_property(struct platform_device *pdev) if (sdhci_of_wp_inverted(np)) host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT; + if (of_get_property(np, "broken-cd", NULL)) + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc")) host->quirks |= SDHCI_QUIRK_BROKEN_DMA; diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c index b6ee8857e226..8e63a9c04e31 100644 --- a/drivers/mmc/host/sdhci-pxav2.c +++ b/drivers/mmc/host/sdhci-pxav2.c @@ -197,7 +197,7 @@ static int __devinit sdhci_pxav2_probe(struct platform_device *pdev) goto err_clk_get; } pltfm_host->clk = clk; - clk_enable(clk); + clk_prepare_enable(clk); host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL @@ -239,7 +239,7 @@ static int __devinit sdhci_pxav2_probe(struct platform_device *pdev) return 0; err_add_host: - clk_disable(clk); + clk_disable_unprepare(clk); clk_put(clk); err_clk_get: sdhci_pltfm_free(pdev); @@ -255,7 +255,7 @@ static int __devexit sdhci_pxav2_remove(struct platform_device *pdev) sdhci_remove_host(host, 1); - clk_disable(pltfm_host->clk); + clk_disable_unprepare(pltfm_host->clk); clk_put(pltfm_host->clk); sdhci_pltfm_free(pdev); kfree(pxa); diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index 07fe3834fe0b..e918a2bb3af1 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -24,12 +24,14 @@ #include <linux/gpio.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> #include <linux/platform_data/pxa_sdhci.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_gpio.h> #include "sdhci.h" #include "sdhci-pltfm.h" @@ -182,6 +184,7 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev) struct device_node *np = dev->of_node; u32 bus_width; u32 clk_delay_cycles; + enum of_gpio_flags gpio_flags; pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -198,6 +201,10 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev) if (clk_delay_cycles > 0) pdata->clk_delay_cycles = clk_delay_cycles; + pdata->ext_cd_gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &gpio_flags); + if (gpio_flags != OF_GPIO_ACTIVE_LOW) + pdata->host_caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + return pdata; } #else @@ -231,14 +238,14 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev) pltfm_host = sdhci_priv(host); pltfm_host->priv = pxa; - clk = clk_get(dev, "PXA-SDHCLK"); + clk = clk_get(dev, NULL); if (IS_ERR(clk)) { dev_err(dev, "failed to get io clock\n"); ret = PTR_ERR(clk); goto err_clk_get; } pltfm_host->clk = clk; - clk_enable(clk); + clk_prepare_enable(clk); host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC @@ -266,12 +273,25 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev) host->quirks |= pdata->quirks; if (pdata->host_caps) host->mmc->caps |= pdata->host_caps; + if (pdata->host_caps2) + host->mmc->caps2 |= pdata->host_caps2; if (pdata->pm_caps) host->mmc->pm_caps |= pdata->pm_caps; + + if (gpio_is_valid(pdata->ext_cd_gpio)) { + ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio); + if (ret) { + dev_err(mmc_dev(host->mmc), + "failed to allocate card detect gpio\n"); + goto err_cd_req; + } + } } host->ops = &pxav3_sdhci_ops; + sdhci_get_of_property(pdev); + ret = sdhci_add_host(host); if (ret) { dev_err(&pdev->dev, "failed to add host\n"); @@ -283,8 +303,10 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev) return 0; err_add_host: - clk_disable(clk); + clk_disable_unprepare(clk); clk_put(clk); + mmc_gpio_free_cd(host->mmc); +err_cd_req: err_clk_get: sdhci_pltfm_free(pdev); kfree(pxa); @@ -296,11 +318,16 @@ static int __devexit sdhci_pxav3_remove(struct platform_device *pdev) struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_pxa *pxa = pltfm_host->priv; + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; sdhci_remove_host(host, 1); - clk_disable(pltfm_host->clk); + clk_disable_unprepare(pltfm_host->clk); clk_put(pltfm_host->clk); + + if (gpio_is_valid(pdata->ext_cd_gpio)) + mmc_gpio_free_cd(host->mmc); + sdhci_pltfm_free(pdev); kfree(pxa); diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index a50c205ea208..2903949594c6 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -34,6 +34,9 @@ #define MAX_BUS_CLK (4) +/* Number of gpio's used is max data bus width + command and clock lines */ +#define NUM_GPIOS(x) (x + 2) + /** * struct sdhci_s3c - S3C SDHCI instance * @host: The SDHCI host created @@ -41,6 +44,7 @@ * @ioarea: The resource created when we claimed the IO area. * @pdata: The platform data for this controller. * @cur_clk: The index of the current bus clock. + * @gpios: List of gpio numbers parsed from device tree. * @clk_io: The clock for the internal bus interface. * @clk_bus: The clocks that are available for the SD/MMC bus clock. */ @@ -52,6 +56,7 @@ struct sdhci_s3c { unsigned int cur_clk; int ext_cd_irq; int ext_cd_gpio; + int *gpios; struct clk *clk_io; struct clk *clk_bus[MAX_BUS_CLK]; @@ -166,7 +171,7 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost, dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n", src, rate, wanted, rate / div); - return (wanted - (rate / div)); + return wanted - (rate / div); } /** @@ -203,10 +208,12 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock) best_src, clock, best); /* select the new clock source */ - if (ourhost->cur_clk != best_src) { struct clk *clk = ourhost->clk_bus[best_src]; + clk_enable(clk); + clk_disable(ourhost->clk_bus[ourhost->cur_clk]); + /* turn clock off to card before changing clock source */ writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); @@ -288,6 +295,7 @@ static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host) static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_s3c *ourhost = to_s3c(host); + struct device *dev = &ourhost->pdev->dev; unsigned long timeout; u16 clk = 0; @@ -309,8 +317,8 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { if (timeout == 0) { - printk(KERN_ERR "%s: Internal clock never " - "stabilised.\n", mmc_hostname(host->mmc)); + dev_err(dev, "%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); return; } timeout--; @@ -404,7 +412,9 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc) if (sc->ext_cd_irq && request_threaded_irq(sc->ext_cd_irq, NULL, sdhci_s3c_gpio_card_detect_thread, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, dev_name(dev), sc) == 0) { int status = gpio_get_value(sc->ext_cd_gpio); if (pdata->ext_cd_gpio_invert) @@ -419,9 +429,121 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc) } } +#ifdef CONFIG_OF +static int __devinit sdhci_s3c_parse_dt(struct device *dev, + struct sdhci_host *host, struct s3c_sdhci_platdata *pdata) +{ + struct device_node *node = dev->of_node; + struct sdhci_s3c *ourhost = to_s3c(host); + u32 max_width; + int gpio, cnt, ret; + + /* if the bus-width property is not specified, assume width as 1 */ + if (of_property_read_u32(node, "bus-width", &max_width)) + max_width = 1; + pdata->max_width = max_width; + + ourhost->gpios = devm_kzalloc(dev, NUM_GPIOS(pdata->max_width) * + sizeof(int), GFP_KERNEL); + if (!ourhost->gpios) + return -ENOMEM; + + /* get the card detection method */ + if (of_get_property(node, "broken-cd", 0)) { + pdata->cd_type = S3C_SDHCI_CD_NONE; + goto setup_bus; + } + + if (of_get_property(node, "non-removable", 0)) { + pdata->cd_type = S3C_SDHCI_CD_PERMANENT; + goto setup_bus; + } + + gpio = of_get_named_gpio(node, "cd-gpios", 0); + if (gpio_is_valid(gpio)) { + pdata->cd_type = S3C_SDHCI_CD_GPIO; + goto found_cd; + } else if (gpio != -ENOENT) { + dev_err(dev, "invalid card detect gpio specified\n"); + return -EINVAL; + } + + gpio = of_get_named_gpio(node, "samsung,cd-pinmux-gpio", 0); + if (gpio_is_valid(gpio)) { + pdata->cd_type = S3C_SDHCI_CD_INTERNAL; + goto found_cd; + } else if (gpio != -ENOENT) { + dev_err(dev, "invalid card detect gpio specified\n"); + return -EINVAL; + } + + dev_info(dev, "assuming no card detect line available\n"); + pdata->cd_type = S3C_SDHCI_CD_NONE; + + found_cd: + if (pdata->cd_type == S3C_SDHCI_CD_GPIO) { + pdata->ext_cd_gpio = gpio; + ourhost->ext_cd_gpio = -1; + if (of_get_property(node, "cd-inverted", NULL)) + pdata->ext_cd_gpio_invert = 1; + } else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + ret = gpio_request(gpio, "sdhci-cd"); + if (ret) { + dev_err(dev, "card detect gpio request failed\n"); + return -EINVAL; + } + ourhost->ext_cd_gpio = gpio; + } + + setup_bus: + /* get the gpios for command, clock and data lines */ + for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) { + gpio = of_get_gpio(node, cnt); + if (!gpio_is_valid(gpio)) { + dev_err(dev, "invalid gpio[%d]\n", cnt); + goto err_free_dt_cd_gpio; + } + ourhost->gpios[cnt] = gpio; + } + + for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) { + ret = gpio_request(ourhost->gpios[cnt], "sdhci-gpio"); + if (ret) { + dev_err(dev, "gpio[%d] request failed\n", cnt); + goto err_free_dt_gpios; + } + } + + return 0; + + err_free_dt_gpios: + while (--cnt >= 0) + gpio_free(ourhost->gpios[cnt]); + err_free_dt_cd_gpio: + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) + gpio_free(ourhost->ext_cd_gpio); + return -EINVAL; +} +#else +static int __devinit sdhci_s3c_parse_dt(struct device *dev, + struct sdhci_host *host, struct s3c_sdhci_platdata *pdata) +{ + return -EINVAL; +} +#endif + +static const struct of_device_id sdhci_s3c_dt_match[]; + static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data( struct platform_device *pdev) { +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node); + return (struct sdhci_s3c_drv_data *)match->data; + } +#endif return (struct sdhci_s3c_drv_data *) platform_get_device_id(pdev)->driver_data; } @@ -436,7 +558,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) struct resource *res; int ret, irq, ptr, clks; - if (!pdev->dev.platform_data) { + if (!pdev->dev.platform_data && !pdev->dev.of_node) { dev_err(dev, "no device data specified\n"); return -ENOENT; } @@ -452,21 +574,28 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) dev_err(dev, "sdhci_alloc_host() failed\n"); return PTR_ERR(host); } + sc = sdhci_priv(host); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { ret = -ENOMEM; - goto err_io_clk; + goto err_pdata; + } + + if (pdev->dev.of_node) { + ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata); + if (ret) + goto err_pdata; + } else { + memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); + sc->ext_cd_gpio = -1; /* invalid gpio number */ } - memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); drv_data = sdhci_s3c_get_driver_data(pdev); - sc = sdhci_priv(host); sc->host = host; sc->pdev = pdev; sc->pdata = pdata; - sc->ext_cd_gpio = -1; /* invalid gpio number */ platform_set_drvdata(pdev, host); @@ -486,9 +615,8 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) snprintf(name, 14, "mmc_busclk.%d", ptr); clk = clk_get(dev, name); - if (IS_ERR(clk)) { + if (IS_ERR(clk)) continue; - } clks++; sc->clk_bus[ptr] = clk; @@ -499,8 +627,6 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) */ sc->cur_clk = ptr; - clk_enable(clk); - dev_info(dev, "clock source %d: %s (%ld Hz)\n", ptr, name, clk_get_rate(clk)); } @@ -511,6 +637,10 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) goto err_no_busclks; } +#ifndef CONFIG_PM_RUNTIME + clk_enable(sc->clk_bus[sc->cur_clk]); +#endif + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->ioaddr = devm_request_and_ioremap(&pdev->dev, res); if (!host->ioaddr) { @@ -616,12 +746,17 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) gpio_is_valid(pdata->ext_cd_gpio)) sdhci_s3c_setup_card_detect_gpio(sc); +#ifdef CONFIG_PM_RUNTIME + clk_disable(sc->clk_io); +#endif return 0; err_req_regs: +#ifndef CONFIG_PM_RUNTIME + clk_disable(sc->clk_bus[sc->cur_clk]); +#endif for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) { if (sc->clk_bus[ptr]) { - clk_disable(sc->clk_bus[ptr]); clk_put(sc->clk_bus[ptr]); } } @@ -631,6 +766,12 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) clk_put(sc->clk_io); err_io_clk: + for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++) + gpio_free(sc->gpios[ptr]); + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) + gpio_free(sc->ext_cd_gpio); + + err_pdata: sdhci_free_host(host); return ret; @@ -638,9 +779,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) static int __devexit sdhci_s3c_remove(struct platform_device *pdev) { - struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data; struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_s3c *sc = sdhci_priv(host); + struct s3c_sdhci_platdata *pdata = sc->pdata; int ptr; if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup) @@ -652,19 +793,30 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev) if (gpio_is_valid(sc->ext_cd_gpio)) gpio_free(sc->ext_cd_gpio); +#ifdef CONFIG_PM_RUNTIME + clk_enable(sc->clk_io); +#endif sdhci_remove_host(host, 1); + pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_disable(&pdev->dev); - for (ptr = 0; ptr < 3; ptr++) { +#ifndef CONFIG_PM_RUNTIME + clk_disable(sc->clk_bus[sc->cur_clk]); +#endif + for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) { if (sc->clk_bus[ptr]) { - clk_disable(sc->clk_bus[ptr]); clk_put(sc->clk_bus[ptr]); } } clk_disable(sc->clk_io); clk_put(sc->clk_io); + if (pdev->dev.of_node) { + for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++) + gpio_free(sc->gpios[ptr]); + } + sdhci_free_host(host); platform_set_drvdata(pdev, NULL); @@ -691,15 +843,28 @@ static int sdhci_s3c_resume(struct device *dev) static int sdhci_s3c_runtime_suspend(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_s3c *ourhost = to_s3c(host); + struct clk *busclk = ourhost->clk_io; + int ret; + + ret = sdhci_runtime_suspend_host(host); - return sdhci_runtime_suspend_host(host); + clk_disable(ourhost->clk_bus[ourhost->cur_clk]); + clk_disable(busclk); + return ret; } static int sdhci_s3c_runtime_resume(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_s3c *ourhost = to_s3c(host); + struct clk *busclk = ourhost->clk_io; + int ret; - return sdhci_runtime_resume_host(host); + clk_enable(busclk); + clk_enable(ourhost->clk_bus[ourhost->cur_clk]); + ret = sdhci_runtime_resume_host(host); + return ret; } #endif @@ -737,6 +902,16 @@ static struct platform_device_id sdhci_s3c_driver_ids[] = { }; MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids); +#ifdef CONFIG_OF +static const struct of_device_id sdhci_s3c_dt_match[] = { + { .compatible = "samsung,s3c6410-sdhci", }, + { .compatible = "samsung,exynos4210-sdhci", + .data = (void *)EXYNOS4_SDHCI_DRV_DATA }, + {}, +}; +MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match); +#endif + static struct platform_driver sdhci_s3c_driver = { .probe = sdhci_s3c_probe, .remove = __devexit_p(sdhci_s3c_remove), @@ -744,6 +919,7 @@ static struct platform_driver sdhci_s3c_driver = { .driver = { .owner = THIS_MODULE, .name = "s3c-sdhci", + .of_match_table = of_match_ptr(sdhci_s3c_dt_match), .pm = SDHCI_S3C_PMOPS, }, }; diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index 423da8194cd8..6be89c032deb 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -20,6 +20,8 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/slab.h> @@ -68,8 +70,42 @@ static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id) return IRQ_HANDLED; } +#ifdef CONFIG_OF +static struct sdhci_plat_data * __devinit +sdhci_probe_config_dt(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sdhci_plat_data *pdata = NULL; + int cd_gpio; + + cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); + if (!gpio_is_valid(cd_gpio)) + cd_gpio = -1; + + /* If pdata is required */ + if (cd_gpio != -1) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "DT: kzalloc failed\n"); + return ERR_PTR(-ENOMEM); + } + } + + pdata->card_int_gpio = cd_gpio; + + return pdata; +} +#else +static struct sdhci_plat_data * __devinit +sdhci_probe_config_dt(struct platform_device *pdev) +{ + return ERR_PTR(-ENOSYS); +} +#endif + static int __devinit sdhci_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct sdhci_host *host; struct resource *iomem; struct spear_sdhci *sdhci; @@ -104,14 +140,22 @@ static int __devinit sdhci_probe(struct platform_device *pdev) goto err; } - ret = clk_enable(sdhci->clk); + ret = clk_prepare_enable(sdhci->clk); if (ret) { dev_dbg(&pdev->dev, "Error enabling clock\n"); goto put_clk; } - /* overwrite platform_data */ - sdhci->data = dev_get_platdata(&pdev->dev); + if (np) { + sdhci->data = sdhci_probe_config_dt(pdev); + if (IS_ERR(sdhci->data)) { + dev_err(&pdev->dev, "DT: Failed to get pdata\n"); + return -ENODEV; + } + } else { + sdhci->data = dev_get_platdata(&pdev->dev); + } + pdev->dev.platform_data = sdhci; if (pdev->dev.parent) @@ -216,7 +260,7 @@ set_drvdata: free_host: sdhci_free_host(host); disable_clk: - clk_disable(sdhci->clk); + clk_disable_unprepare(sdhci->clk); put_clk: clk_put(sdhci->clk); err: @@ -238,7 +282,7 @@ static int __devexit sdhci_remove(struct platform_device *pdev) sdhci_remove_host(host, dead); sdhci_free_host(host); - clk_disable(sdhci->clk); + clk_disable_unprepare(sdhci->clk); clk_put(sdhci->clk); return 0; @@ -253,7 +297,7 @@ static int sdhci_suspend(struct device *dev) ret = sdhci_suspend_host(host); if (!ret) - clk_disable(sdhci->clk); + clk_disable_unprepare(sdhci->clk); return ret; } @@ -264,7 +308,7 @@ static int sdhci_resume(struct device *dev) struct spear_sdhci *sdhci = dev_get_platdata(dev); int ret; - ret = clk_enable(sdhci->clk); + ret = clk_prepare_enable(sdhci->clk); if (ret) { dev_dbg(dev, "Resume: Error enabling clock\n"); return ret; @@ -276,11 +320,20 @@ static int sdhci_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume); +#ifdef CONFIG_OF +static const struct of_device_id sdhci_spear_id_table[] = { + { .compatible = "st,spear300-sdhci" }, + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_spear_id_table); +#endif + static struct platform_driver sdhci_driver = { .driver = { .name = "sdhci", .owner = THIS_MODULE, .pm = &sdhci_pm_ops, + .of_match_table = of_match_ptr(sdhci_spear_id_table), }, .probe = sdhci_probe, .remove = __devexit_p(sdhci_remove), diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index d43e7462941f..84e8d0c59ee5 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -257,10 +257,9 @@ static int __devinit sdhci_tegra_probe(struct platform_device *pdev) int rc; match = of_match_device(sdhci_tegra_dt_match, &pdev->dev); - if (match) - soc_data = match->data; - else - soc_data = &soc_data_tegra20; + if (!match) + return -EINVAL; + soc_data = match->data; host = sdhci_pltfm_init(pdev, soc_data->pdata); if (IS_ERR(host)) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 9a11dc39921c..7922adb42386 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -28,6 +28,7 @@ #include <linux/mmc/mmc.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> #include "sdhci.h" @@ -1293,6 +1294,13 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) present = sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT; + /* If we're using a cd-gpio, testing the presence bit might fail. */ + if (!present) { + int ret = mmc_gpio_get_cd(host->mmc); + if (ret > 0) + present = true; + } + if (!present || host->flags & SDHCI_DEVICE_DEAD) { host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); @@ -1597,57 +1605,65 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) spin_unlock_irqrestore(&host->lock, flags); } -static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, - struct mmc_ios *ios) +static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host, + u16 ctrl) { - u8 pwr; - u16 clk, ctrl; - u32 present_state; + int ret; - /* - * Signal Voltage Switching is only applicable for Host Controllers - * v3.00 and above. - */ - if (host->version < SDHCI_SPEC_300) - return 0; + /* Set 1.8V Signal Enable in the Host Control2 register to 0 */ + ctrl &= ~SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - /* - * We first check whether the request is to set signalling voltage - * to 3.3V. If so, we change the voltage to 3.3V and return quickly. - */ + if (host->vqmmc) { + ret = regulator_set_voltage(host->vqmmc, 3300000, 3300000); + if (ret) { + pr_warning("%s: Switching to 3.3V signalling voltage " + " failed\n", mmc_hostname(host->mmc)); + return -EIO; + } + } + /* Wait for 5ms */ + usleep_range(5000, 5500); + + /* 3.3V regulator output should be stable within 5 ms */ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { - /* Set 1.8V Signal Enable in the Host Control2 register to 0 */ - ctrl &= ~SDHCI_CTRL_VDD_180; - sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_VDD_180)) + return 0; - /* Wait for 5ms */ - usleep_range(5000, 5500); + pr_warning("%s: 3.3V regulator output did not became stable\n", + mmc_hostname(host->mmc)); - /* 3.3V regulator output should be stable within 5 ms */ - ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); - if (!(ctrl & SDHCI_CTRL_VDD_180)) - return 0; - else { - pr_info(DRIVER_NAME ": Switching to 3.3V " - "signalling voltage failed\n"); - return -EIO; - } - } else if (!(ctrl & SDHCI_CTRL_VDD_180) && - (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)) { - /* Stop SDCLK */ - clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); - clk &= ~SDHCI_CLOCK_CARD_EN; - sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + return -EIO; +} - /* Check whether DAT[3:0] is 0000 */ - present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); - if (!((present_state & SDHCI_DATA_LVL_MASK) >> - SDHCI_DATA_LVL_SHIFT)) { - /* - * Enable 1.8V Signal Enable in the Host Control2 - * register - */ +static int sdhci_do_1_8v_signal_voltage_switch(struct sdhci_host *host, + u16 ctrl) +{ + u8 pwr; + u16 clk; + u32 present_state; + int ret; + + /* Stop SDCLK */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Check whether DAT[3:0] is 0000 */ + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); + if (!((present_state & SDHCI_DATA_LVL_MASK) >> + SDHCI_DATA_LVL_SHIFT)) { + /* + * Enable 1.8V Signal Enable in the Host Control2 + * register + */ + if (host->vqmmc) + ret = regulator_set_voltage(host->vqmmc, + 1800000, 1800000); + else + ret = 0; + + if (!ret) { ctrl |= SDHCI_CTRL_VDD_180; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); @@ -1656,7 +1672,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); if (ctrl & SDHCI_CTRL_VDD_180) { - /* Provide SDCLK again and wait for 1ms*/ + /* Provide SDCLK again and wait for 1ms */ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); clk |= SDHCI_CLOCK_CARD_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); @@ -1673,29 +1689,55 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, return 0; } } + } - /* - * If we are here, that means the switch to 1.8V signaling - * failed. We power cycle the card, and retry initialization - * sequence by setting S18R to 0. - */ - pwr = sdhci_readb(host, SDHCI_POWER_CONTROL); - pwr &= ~SDHCI_POWER_ON; - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); - if (host->vmmc) - regulator_disable(host->vmmc); + /* + * If we are here, that means the switch to 1.8V signaling + * failed. We power cycle the card, and retry initialization + * sequence by setting S18R to 0. + */ + pwr = sdhci_readb(host, SDHCI_POWER_CONTROL); + pwr &= ~SDHCI_POWER_ON; + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + if (host->vmmc) + regulator_disable(host->vmmc); - /* Wait for 1ms as per the spec */ - usleep_range(1000, 1500); - pwr |= SDHCI_POWER_ON; - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); - if (host->vmmc) - regulator_enable(host->vmmc); + /* Wait for 1ms as per the spec */ + usleep_range(1000, 1500); + pwr |= SDHCI_POWER_ON; + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + if (host->vmmc) + regulator_enable(host->vmmc); - pr_info(DRIVER_NAME ": Switching to 1.8V signalling " - "voltage failed, retrying with S18R set to 0\n"); - return -EAGAIN; - } else + pr_warning("%s: Switching to 1.8V signalling voltage failed, " + "retrying with S18R set to 0\n", mmc_hostname(host->mmc)); + + return -EAGAIN; +} + +static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, + struct mmc_ios *ios) +{ + u16 ctrl; + + /* + * Signal Voltage Switching is only applicable for Host Controllers + * v3.00 and above. + */ + if (host->version < SDHCI_SPEC_300) + return 0; + + /* + * We first check whether the request is to set signalling voltage + * to 3.3V. If so, we change the voltage to 3.3V and return quickly. + */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) + return sdhci_do_3_3v_signal_voltage_switch(host, ctrl); + else if (!(ctrl & SDHCI_CTRL_VDD_180) && + (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)) + return sdhci_do_1_8v_signal_voltage_switch(host, ctrl); + else /* No signal voltage switch required */ return 0; } @@ -2802,6 +2844,18 @@ int sdhci_add_host(struct sdhci_host *host) !(host->mmc->caps & MMC_CAP_NONREMOVABLE)) mmc->caps |= MMC_CAP_NEEDS_POLL; + /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ + host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc"); + if (IS_ERR(host->vqmmc)) { + pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc)); + host->vqmmc = NULL; + } + else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000)) + regulator_enable(host->vqmmc); + else + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50)) @@ -2832,15 +2886,6 @@ int sdhci_add_host(struct sdhci_host *host) if (caps[1] & SDHCI_DRIVER_TYPE_D) mmc->caps |= MMC_CAP_DRIVER_TYPE_D; - /* - * If Power Off Notify capability is enabled by the host, - * set notify to short power off notify timeout value. - */ - if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY) - mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT; - else - mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE; - /* Initial value for re-tuning timer count */ host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >> SDHCI_RETUNING_TIMER_COUNT_SHIFT; @@ -2862,7 +2907,8 @@ int sdhci_add_host(struct sdhci_host *host) if (IS_ERR(host->vmmc)) { pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc)); host->vmmc = NULL; - } + } else + regulator_enable(host->vmmc); #ifdef CONFIG_REGULATOR if (host->vmmc) { @@ -3119,8 +3165,15 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); - if (host->vmmc) + if (host->vmmc) { + regulator_disable(host->vmmc); regulator_put(host->vmmc); + } + + if (host->vqmmc) { + regulator_disable(host->vqmmc); + regulator_put(host->vqmmc); + } kfree(host->adma_desc); kfree(host->align_buffer); diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 5d8142773fac..11d2bc3b51d5 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1213,7 +1213,9 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id) sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE); sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE); } else if (state & INT_DTRANE) { - sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_DTRANE); + sh_mmcif_writel(host->addr, MMCIF_CE_INT, + ~(INT_CMD12DRE | INT_CMD12RBE | + INT_CMD12CRE | INT_DTRANE)); sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE); } else if (state & INT_CMD12RBE) { sh_mmcif_writel(host->addr, MMCIF_CE_INT, @@ -1229,6 +1231,10 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id) host->sd_error = true; dev_dbg(&host->pd->dev, "int err state = %08x\n", state); } + if (host->state == STATE_IDLE) { + dev_info(&host->pd->dev, "Spurious IRQ status 0x%x", state); + return IRQ_HANDLED; + } if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) { if (!host->dma_active) return IRQ_WAKE_THREAD; diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c index 4b83c43f950d..f18becef156d 100644 --- a/drivers/mmc/host/via-sdmmc.c +++ b/drivers/mmc/host/via-sdmmc.c @@ -1337,21 +1337,7 @@ static struct pci_driver via_sd_driver = { .resume = via_sd_resume, }; -static int __init via_sd_drv_init(void) -{ - pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver " - "(C) 2008 VIA Technologies, Inc.\n"); - - return pci_register_driver(&via_sd_driver); -} - -static void __exit via_sd_drv_exit(void) -{ - pci_unregister_driver(&via_sd_driver); -} - -module_init(via_sd_drv_init); -module_exit(via_sd_drv_exit); +module_pci_driver(via_sd_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("VIA Technologies Inc."); diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index 58eab9ac1d01..d5655a63eda4 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2358,9 +2358,9 @@ error5: * which is contained at the end of struct mmc */ error4: - usb_free_urb(command_out_urb); -error1: usb_free_urb(command_res_urb); +error1: + usb_free_urb(command_out_urb); error0: return retval; } diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 4b27f9f503e4..943550dfe9ea 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -57,6 +57,7 @@ struct mmc_ext_csd { unsigned int sa_timeout; /* Units: 100ns */ unsigned int generic_cmd6_time; /* Units: 10ms */ unsigned int power_off_longtime; /* Units: ms */ + u8 power_off_notification; /* state */ unsigned int hs_max_dtr; #define MMC_HIGH_26_MAX_DTR 26000000 #define MMC_HIGH_52_MAX_DTR 52000000 @@ -76,10 +77,13 @@ struct mmc_ext_csd { bool hpi_en; /* HPI enablebit */ bool hpi; /* HPI support bit */ unsigned int hpi_cmd; /* cmd used as HPI */ + bool bkops; /* background support bit */ + bool bkops_en; /* background enable bit */ unsigned int data_sector_size; /* 512 bytes or 4KB */ unsigned int data_tag_unit_size; /* DATA TAG UNIT size */ unsigned int boot_ro_lock; /* ro lock support */ bool boot_ro_lockable; + u8 raw_exception_status; /* 53 */ u8 raw_partition_support; /* 160 */ u8 raw_erased_mem_count; /* 181 */ u8 raw_ext_csd_structure; /* 194 */ @@ -93,6 +97,7 @@ struct mmc_ext_csd { u8 raw_sec_erase_mult; /* 230 */ u8 raw_sec_feature_support;/* 231 */ u8 raw_trim_mult; /* 232 */ + u8 raw_bkops_status; /* 246 */ u8 raw_sectors[4]; /* 212 - 4 bytes */ unsigned int feature_support; @@ -225,7 +230,7 @@ struct mmc_card { #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ #define MMC_CARD_REMOVED (1<<7) /* card has been removed */ #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ -#define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */ +#define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -241,11 +246,6 @@ struct mmc_card { #define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */ #define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */ /* byte mode */ - unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */ -#define MMC_NO_POWER_NOTIFICATION 0 -#define MMC_POWERED_ON 1 -#define MMC_POWEROFF_SHORT 2 -#define MMC_POWEROFF_LONG 3 unsigned int erase_size; /* erase size in sectors */ unsigned int erase_shift; /* if erase unit is power 2 */ @@ -392,7 +392,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) -#define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP) +#define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) @@ -404,9 +404,9 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) -#define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP) +#define mmc_card_set_doing_bkops(c) ((c)->state |= MMC_STATE_DOING_BKOPS) +#define mmc_card_clr_doing_bkops(c) ((c)->state &= ~MMC_STATE_DOING_BKOPS) -#define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP) /* * Quirk add/remove for MMC products. */ diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 1b431c728b9a..9b9cdafc7737 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -134,6 +134,8 @@ struct mmc_host; struct mmc_card; struct mmc_async_req; +extern int mmc_stop_bkops(struct mmc_card *); +extern int mmc_read_bkops_status(struct mmc_card *); extern struct mmc_async_req *mmc_start_req(struct mmc_host *, struct mmc_async_req *, int *); extern int mmc_interrupt_hpi(struct mmc_card *); @@ -142,6 +144,8 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int); extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *); extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *, struct mmc_command *, int); +extern void mmc_start_bkops(struct mmc_card *card, bool from_exception); +extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool); extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int); #define MMC_ERASE_ARG 0x00000000 diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 7a7ebd367cfd..7c6a1139d8fa 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -78,6 +78,10 @@ struct mmc_data; * @data_offset: Set the offset of DATA register according to VERID. * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. + * @drv_data: Driver specific data for identified variant of the controller + * @priv: Implementation defined private data. + * @biu_clk: Pointer to bus interface unit clock instance. + * @ciu_clk: Pointer to card interface unit clock instance. * @slot: Slots sharing this MMC controller. * @fifo_depth: depth of FIFO. * @data_shift: log2 of FIFO item size. @@ -156,8 +160,12 @@ struct dw_mci { u32 fifoth_val; u16 verid; u16 data_offset; - struct device dev; + struct device *dev; struct dw_mci_board *pdata; + struct dw_mci_drv_data *drv_data; + void *priv; + struct clk *biu_clk; + struct clk *ciu_clk; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; /* FIFO push and pull */ @@ -201,7 +209,8 @@ struct dw_mci_dma_ops { #define DW_MCI_QUIRK_HIGHSPEED BIT(2) /* Unreliable card detection */ #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(3) - +/* Write Protect detection not available */ +#define DW_MCI_QUIRK_NO_WRITE_PROTECT BIT(4) struct dma_pdata; @@ -218,7 +227,7 @@ struct dw_mci_board { u32 num_slots; u32 quirks; /* Workaround / Quirk flags */ - unsigned int bus_hz; /* Bus speed */ + unsigned int bus_hz; /* Clock speed at the cclk_in pad */ unsigned int caps; /* Capabilities */ unsigned int caps2; /* More capabilities */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index f578a71d82a6..7abb0e1f7bda 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -259,10 +259,6 @@ struct mmc_host { #define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ mmc_pm_flag_t pm_caps; /* supported pm features */ - unsigned int power_notify_type; -#define MMC_HOST_PW_NOTIFY_NONE 0 -#define MMC_HOST_PW_NOTIFY_SHORT 1 -#define MMC_HOST_PW_NOTIFY_LONG 2 #ifdef CONFIG_MMC_CLKGATE int clk_requests; /* internal reference counter */ @@ -300,6 +296,7 @@ struct mmc_host { #endif int rescan_disable; /* disable card detection */ + int rescan_entered; /* used with nonremovable devices */ struct mmc_card *card; /* device attached to this host */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index d425cab144d9..01e4b394029b 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -139,6 +139,7 @@ static inline bool mmc_op_multi(u32 opcode) #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */ #define R1_SWITCH_ERROR (1 << 7) /* sx, c */ +#define R1_EXCEPTION_EVENT (1 << 6) /* sx, a */ #define R1_APP_CMD (1 << 5) /* sr, c */ #define R1_STATE_IDLE 0 @@ -274,12 +275,15 @@ struct _mmc_csd { #define EXT_CSD_FLUSH_CACHE 32 /* W */ #define EXT_CSD_CACHE_CTRL 33 /* R/W */ #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ +#define EXT_CSD_EXP_EVENTS_STATUS 54 /* RO */ #define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */ #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ #define EXT_CSD_HPI_MGMT 161 /* R/W */ #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ +#define EXT_CSD_BKOPS_EN 163 /* R/W */ +#define EXT_CSD_BKOPS_START 164 /* W */ #define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ #define EXT_CSD_BOOT_WP 173 /* R/W */ @@ -313,11 +317,13 @@ struct _mmc_csd { #define EXT_CSD_PWR_CL_200_360 237 /* RO */ #define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */ #define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */ +#define EXT_CSD_BKOPS_STATUS 246 /* RO */ #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ +#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */ #define EXT_CSD_HPI_FEATURES 503 /* RO */ /* @@ -378,6 +384,19 @@ struct _mmc_csd { #define EXT_CSD_PWR_CL_8BIT_SHIFT 4 #define EXT_CSD_PWR_CL_4BIT_SHIFT 0 /* + * EXCEPTION_EVENT_STATUS field + */ +#define EXT_CSD_URGENT_BKOPS BIT(0) +#define EXT_CSD_DYNCAP_NEEDED BIT(1) +#define EXT_CSD_SYSPOOL_EXHAUSTED BIT(2) +#define EXT_CSD_PACKED_FAILURE BIT(3) + +/* + * BKOPS status level + */ +#define EXT_CSD_BKOPS_LEVEL_2 0x2 + +/* * MMC_SWITCH access modes */ diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index ac83b105bedd..fa8529a859b8 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -97,7 +97,8 @@ struct sdhci_host { const struct sdhci_ops *ops; /* Low level hw interface */ - struct regulator *vmmc; /* Power regulator */ + struct regulator *vmmc; /* Power regulator (vmmc) */ + struct regulator *vqmmc; /* Signaling regulator (vccq) */ /* Internal data */ struct mmc_host *mmc; /* MMC structure */ diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h index 51ad0995abac..59acd987ed34 100644 --- a/include/linux/platform_data/pxa_sdhci.h +++ b/include/linux/platform_data/pxa_sdhci.h @@ -49,6 +49,7 @@ struct sdhci_pxa_platdata { bool ext_cd_gpio_invert; unsigned int max_speed; unsigned int host_caps; + unsigned int host_caps2; unsigned int quirks; unsigned int pm_caps; }; |