[SCSI] aic94xx: new driver

This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>

The log of the separate development is:

Alexis Bruemmer:
  o aic94xx: fix hotplug/unplug for expanderless systems
  o aic94xx: disable split completion timer/setting by default
  o aic94xx: wide port off expander support
  o aic94xx: remove various inline functions
  o aic94xx: use bitops
  o aic94xx: remove queue comment
  o aic94xx: remove sas_common.c
  o aic94xx: sas remove depot's
  o aic94xx: use available list_for_each_entry_safe_reverse()
  o aic94xx: sas header file merge

James Bottomley:
  o aic94xx: fix TF_TMF_NO_CTX processing
  o aic94xx: convert to request_firmware interface
  o aic94xx: fix hotplug/unplug
  o aic94xx: add link error counts to the expander phys
  o aic94xx: add transport class phy reset capability
  o aic94xx: remove local_attached flag
  o Remove README
  o Fixup Makefile variable for libsas rename
  o Rename sas->libsas
  o aic94xx: correct return code for sas_discover_event
  o aic94xx: use parent backlink port
  o aic94xx: remove channel abstraction
  o aic94xx: fix routing algorithms
  o aic94xx: add backlink port
  o aic94xx: fix cascaded expander properties
  o aic94xx: fix sleep under lock
  o aic94xx: fix panic on module removal in complex topology
  o aic94xx: make use of the new sas_port
  o rename sas_port to asd_sas_port
  o Fix for eh_strategy_handler move
  o aic94xx: move entirely over to correct transport class formulation
  o remove last vestages of sas_rphy_alloc()
  o update for eh_timed_out move
  o Preliminary expander support for aic94xx
  o sas: remove event thread
  o minor warning cleanups
  o remove last vestiges of id mapping arrays
  o Further updates
  o Convert aic94xx over entirely to the transport class end device and
  o update aic94xx/sas to use the new sas transport class end device
  o [PATCH] aic94xx: attaching to the sas transport class
  o Add missing completion removal from prior patch
  o [PATCH] aic94xx: attaching to the sas transport class
  o Build fixes from akpm

Jeff Garzik:
  o [scsi aic94xx] Remove ->owner from PCI info table

Luben Tuikov:
  o initial aic94xx driver

Mike Anderson:
  o aic94xx: fix panic on module insertion
  o aic94xx: stub out SATA_DEV case
  o aic94xx: compile warning cleanups
  o aic94xx: sas_alloc_task
  o aic94xx: ref count update
  o aic94xx nexus loss time value
  o [PATCH] aic94xx: driver assertion in non-x86 BIOS env

Randy Dunlap:
  o libsas: externs not needed

Robert Tarte:
  o aic94xx: sequence patch - fixes SATA support

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

37 files changed, 18866 insertions, 1 deletions

diff --git a/Documentation/scsi/libsas.txt b/Documentation/scsi/libsas.txt
new file mode 100644
index 000000000000..9e2078b2a615
--- /dev/null
+++ b/Documentation/scsi/libsas.txt
@@ -0,0 +1,484 @@
+SAS Layer
+---------
+
+The SAS Layer is a management infrastructure which manages
+SAS LLDDs.  It sits between SCSI Core and SAS LLDDs.  The
+layout is as follows: while SCSI Core is concerned with
+SAM/SPC issues, and a SAS LLDD+sequencer is concerned with
+phy/OOB/link management, the SAS layer is concerned with:
+
+      * SAS Phy/Port/HA event management (LLDD generates,
+        SAS Layer processes),
+      * SAS Port management (creation/destruction),
+      * SAS Domain discovery and revalidation,
+      * SAS Domain device management,
+      * SCSI Host registration/unregistration,
+      * Device registration with SCSI Core (SAS) or libata
+        (SATA), and
+      * Expander management and exporting expander control
+        to user space.
+
+A SAS LLDD is a PCI device driver.  It is concerned with
+phy/OOB management, and vendor specific tasks and generates
+events to the SAS layer.
+
+The SAS Layer does most SAS tasks as outlined in the SAS 1.1
+spec.
+
+The sas_ha_struct describes the SAS LLDD to the SAS layer.
+Most of it is used by the SAS Layer but a few fields need to
+be initialized by the LLDDs.
+
+After initializing your hardware, from the probe() function
+you call sas_register_ha(). It will register your LLDD with
+the SCSI subsystem, creating a SCSI host and it will
+register your SAS driver with the sysfs SAS tree it creates.
+It will then return.  Then you enable your phys to actually
+start OOB (at which point your driver will start calling the
+notify_* event callbacks).
+
+Structure descriptions:
+
+struct sas_phy --------------------
+Normally this is statically embedded to your driver's
+phy structure:
+	struct my_phy {
+	       blah;
+	       struct sas_phy sas_phy;
+	       bleh;
+	};
+And then all the phys are an array of my_phy in your HA
+struct (shown below).
+
+Then as you go along and initialize your phys you also
+initialize the sas_phy struct, along with your own
+phy structure.
+
+In general, the phys are managed by the LLDD and the ports
+are managed by the SAS layer.  So the phys are initialized
+and updated by the LLDD and the ports are initialized and
+updated by the SAS layer.
+
+There is a scheme where the LLDD can RW certain fields,
+and the SAS layer can only read such ones, and vice versa.
+The idea is to avoid unnecessary locking.
+
+enabled -- must be set (0/1)
+id -- must be set [0,MAX_PHYS)
+class, proto, type, role, oob_mode, linkrate -- must be set
+oob_mode --  you set this when OOB has finished and then notify
+the SAS Layer.
+
+sas_addr -- this normally points to an array holding the sas
+address of the phy, possibly somewhere in your my_phy
+struct.
+
+attached_sas_addr -- set this when you (LLDD) receive an
+IDENTIFY frame or a FIS frame, _before_ notifying the SAS
+layer.  The idea is that sometimes the LLDD may want to fake
+or provide a different SAS address on that phy/port and this
+allows it to do this.  At best you should copy the sas
+address from the IDENTIFY frame or maybe generate a SAS
+address for SATA directly attached devices.  The Discover
+process may later change this.
+
+frame_rcvd -- this is where you copy the IDENTIFY/FIS frame
+when you get it; you lock, copy, set frame_rcvd_size and
+unlock the lock, and then call the event.  It is a pointer
+since there's no way to know your hw frame size _exactly_,
+so you define the actual array in your phy struct and let
+this pointer point to it.  You copy the frame from your
+DMAable memory to that area holding the lock.
+
+sas_prim -- this is where primitives go when they're
+received.  See sas.h. Grab the lock, set the primitive,
+release the lock, notify.
+
+port -- this points to the sas_port if the phy belongs
+to a port -- the LLDD only reads this. It points to the
+sas_port this phy is part of.  Set by the SAS Layer.
+
+ha -- may be set; the SAS layer sets it anyway.
+
+lldd_phy -- you should set this to point to your phy so you
+can find your way around faster when the SAS layer calls one
+of your callbacks and passes you a phy.  If the sas_phy is
+embedded you can also use container_of -- whatever you
+prefer.
+
+
+struct sas_port --------------------
+The LLDD doesn't set any fields of this struct -- it only
+reads them.  They should be self explanatory.
+
+phy_mask is 32 bit, this should be enough for now, as I
+haven't heard of a HA having more than 8 phys.
+
+lldd_port -- I haven't found use for that -- maybe other
+LLDD who wish to have internal port representation can make
+use of this.
+
+
+struct sas_ha_struct --------------------
+It normally is statically declared in your own LLDD
+structure describing your adapter:
+struct my_sas_ha {
+       blah;
+       struct sas_ha_struct sas_ha;
+       struct my_phy phys[MAX_PHYS];
+       struct sas_port sas_ports[MAX_PHYS]; /* (1) */
+       bleh;
+};
+
+(1) If your LLDD doesn't have its own port representation.
+
+What needs to be initialized (sample function given below).
+
+pcidev
+sas_addr -- since the SAS layer doesn't want to mess with
+	 memory allocation, etc, this points to statically
+	 allocated array somewhere (say in your host adapter
+	 structure) and holds the SAS address of the host
+	 adapter as given by you or the manufacturer, etc.
+sas_port
+sas_phy -- an array of pointers to structures. (see
+	note above on sas_addr).
+	These must be set.  See more notes below.
+num_phys -- the number of phys present in the sas_phy array,
+	 and the number of ports present in the sas_port
+	 array.  There can be a maximum num_phys ports (one per
+	 port) so we drop the num_ports, and only use
+	 num_phys.
+
+The event interface:
+
+	/* LLDD calls these to notify the class of an event. */
+	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+	void (*notify_port_event)(struct sas_phy *, enum port_event);
+	void (*notify_phy_event)(struct sas_phy *, enum phy_event);
+
+When sas_register_ha() returns, those are set and can be
+called by the LLDD to notify the SAS layer of such events
+the SAS layer.
+
+The port notification:
+
+	/* The class calls these to notify the LLDD of an event. */
+	void (*lldd_port_formed)(struct sas_phy *);
+	void (*lldd_port_deformed)(struct sas_phy *);
+
+If the LLDD wants notification when a port has been formed
+or deformed it sets those to a function satisfying the type.
+
+A SAS LLDD should also implement at least one of the Task
+Management Functions (TMFs) described in SAM:
+
+	/* Task Management Functions. Must be called from process context. */
+	int (*lldd_abort_task)(struct sas_task *);
+	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_I_T_nexus_reset)(struct domain_device *);
+	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+	int (*lldd_query_task)(struct sas_task *);
+
+For more information please read SAM from T10.org.
+
+Port and Adapter management:
+
+	/* Port and Adapter management */
+	int (*lldd_clear_nexus_port)(struct sas_port *);
+	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+A SAS LLDD should implement at least one of those.
+
+Phy management:
+
+	/* Phy management */
+	int (*lldd_control_phy)(struct sas_phy *, enum phy_func);
+
+lldd_ha -- set this to point to your HA struct. You can also
+use container_of if you embedded it as shown above.
+
+A sample initialization and registration function
+can look like this (called last thing from probe())
+*but* before you enable the phys to do OOB:
+
+static int register_sas_ha(struct my_sas_ha *my_ha)
+{
+	int i;
+	static struct sas_phy   *sas_phys[MAX_PHYS];
+	static struct sas_port  *sas_ports[MAX_PHYS];
+
+	my_ha->sas_ha.sas_addr = &my_ha->sas_addr[0];
+
+	for (i = 0; i < MAX_PHYS; i++) {
+		sas_phys[i] = &my_ha->phys[i].sas_phy;
+		sas_ports[i] = &my_ha->sas_ports[i];
+	}
+
+	my_ha->sas_ha.sas_phy  = sas_phys;
+	my_ha->sas_ha.sas_port = sas_ports;
+	my_ha->sas_ha.num_phys = MAX_PHYS;
+
+	my_ha->sas_ha.lldd_port_formed = my_port_formed;
+
+	my_ha->sas_ha.lldd_dev_found = my_dev_found;
+	my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
+
+	my_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num; (1)
+
+	my_ha->sas_ha.lldd_queue_size = ha_can_queue;
+	my_ha->sas_ha.lldd_execute_task = my_execute_task;
+
+	my_ha->sas_ha.lldd_abort_task     = my_abort_task;
+	my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set;
+	my_ha->sas_ha.lldd_clear_aca      = my_clear_aca;
+	my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set;
+	my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2)
+	my_ha->sas_ha.lldd_lu_reset       = my_lu_reset;
+	my_ha->sas_ha.lldd_query_task     = my_query_task;
+
+	my_ha->sas_ha.lldd_clear_nexus_port = my_clear_nexus_port;
+	my_ha->sas_ha.lldd_clear_nexus_ha = my_clear_nexus_ha;
+
+	my_ha->sas_ha.lldd_control_phy = my_control_phy;
+
+	return sas_register_ha(&my_ha->sas_ha);
+}
+
+(1) This is normally a LLDD parameter, something of the
+lines of a task collector.  What it tells the SAS Layer is
+whether the SAS layer should run in Direct Mode (default:
+value 0 or 1) or Task Collector Mode (value greater than 1).
+
+In Direct Mode, the SAS Layer calls Execute Task as soon as
+it has a command to send to the SDS, _and_ this is a single
+command, i.e. not linked.
+
+Some hardware (e.g. aic94xx) has the capability to DMA more
+than one task at a time (interrupt) from host memory.  Task
+Collector Mode is an optional feature for HAs which support
+this in their hardware.  (Again, it is completely optional
+even if your hardware supports it.)
+
+In Task Collector Mode, the SAS Layer would do _natural_
+coalescing of tasks and at the appropriate moment it would
+call your driver to DMA more than one task in a single HA
+interrupt. DMBS may want to use this by insmod/modprobe
+setting the lldd_max_execute_num to something greater than
+1.
+
+(2) SAS 1.1 does not define I_T Nexus Reset TMF.
+
+Events
+------
+
+Events are _the only way_ a SAS LLDD notifies the SAS layer
+of anything.  There is no other method or way a LLDD to tell
+the SAS layer of anything happening internally or in the SAS
+domain.
+
+Phy events:
+	PHYE_LOSS_OF_SIGNAL, (C)
+	PHYE_OOB_DONE,
+	PHYE_OOB_ERROR,      (C)
+	PHYE_SPINUP_HOLD.
+
+Port events, passed on a _phy_:
+	PORTE_BYTES_DMAED,      (M)
+	PORTE_BROADCAST_RCVD,   (E)
+	PORTE_LINK_RESET_ERR,   (C)
+	PORTE_TIMER_EVENT,      (C)
+	PORTE_HARD_RESET.
+
+Host Adapter event:
+	HAE_RESET
+
+A SAS LLDD should be able to generate
+	- at least one event from group C (choice),
+	- events marked M (mandatory) are mandatory (only one),
+	- events marked E (expander) if it wants the SAS layer
+	  to handle domain revalidation (only one such).
+	- Unmarked events are optional.
+
+Meaning:
+
+HAE_RESET -- when your HA got internal error and was reset.
+
+PORTE_BYTES_DMAED -- on receiving an IDENTIFY/FIS frame
+PORTE_BROADCAST_RCVD -- on receiving a primitive
+PORTE_LINK_RESET_ERR -- timer expired, loss of signal, loss
+of DWS, etc. (*)
+PORTE_TIMER_EVENT -- DWS reset timeout timer expired (*)
+PORTE_HARD_RESET -- Hard Reset primitive received.
+
+PHYE_LOSS_OF_SIGNAL -- the device is gone (*)
+PHYE_OOB_DONE -- OOB went fine and oob_mode is valid
+PHYE_OOB_ERROR -- Error while doing OOB, the device probably
+got disconnected. (*)
+PHYE_SPINUP_HOLD -- SATA is present, COMWAKE not sent.
+
+(*) should set/clear the appropriate fields in the phy,
+    or alternatively call the inlined sas_phy_disconnected()
+    which is just a helper, from their tasklet.
+
+The Execute Command SCSI RPC:
+
+	int (*lldd_execute_task)(struct sas_task *, int num,
+				 unsigned long gfp_flags);
+
+Used to queue a task to the SAS LLDD.  @task is the tasks to
+be executed.  @num should be the number of tasks being
+queued at this function call (they are linked listed via
+task::list), @gfp_mask should be the gfp_mask defining the
+context of the caller.
+
+This function should implement the Execute Command SCSI RPC,
+or if you're sending a SCSI Task as linked commands, you
+should also use this function.
+
+That is, when lldd_execute_task() is called, the command(s)
+go out on the transport *immediately*.  There is *no*
+queuing of any sort and at any level in a SAS LLDD.
+
+The use of task::list is two-fold, one for linked commands,
+the other discussed below.
+
+It is possible to queue up more than one task at a time, by
+initializing the list element of struct sas_task, and
+passing the number of tasks enlisted in this manner in num.
+
+Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
+	 0, the task(s) were queued.
+
+If you want to pass num > 1, then either
+A) you're the only caller of this function and keep track
+   of what you've queued to the LLDD, or
+B) you know what you're doing and have a strategy of
+   retrying.
+
+As opposed to queuing one task at a time (function call),
+batch queuing of tasks, by having num > 1, greatly
+simplifies LLDD code, sequencer code, and _hardware design_,
+and has some performance advantages in certain situations
+(DBMS).
+
+The LLDD advertises if it can take more than one command at
+a time at lldd_execute_task(), by setting the
+lldd_max_execute_num parameter (controlled by "collector"
+module parameter in aic94xx SAS LLDD).
+
+You should leave this to the default 1, unless you know what
+you're doing.
+
+This is a function of the LLDD, to which the SAS layer can
+cater to.
+
+int lldd_queue_size
+	The host adapter's queue size.  This is the maximum
+number of commands the lldd can have pending to domain
+devices on behalf of all upper layers submitting through
+lldd_execute_task().
+
+You really want to set this to something (much) larger than
+1.
+
+This _really_ has absolutely nothing to do with queuing.
+There is no queuing in SAS LLDDs.
+
+struct sas_task {
+	dev -- the device this task is destined to
+	list -- must be initialized (INIT_LIST_HEAD)
+	task_proto -- _one_ of enum sas_proto
+	scatter -- pointer to scatter gather list array
+	num_scatter -- number of elements in scatter
+	total_xfer_len -- total number of bytes expected to be transfered
+	data_dir -- PCI_DMA_...
+	task_done -- callback when the task has finished execution
+};
+
+When an external entity, entity other than the LLDD or the
+SAS Layer, wants to work with a struct domain_device, it
+_must_ call kobject_get() when getting a handle on the
+device and kobject_put() when it is done with the device.
+
+This does two things:
+     A) implements proper kfree() for the device;
+     B) increments/decrements the kref for all players:
+     domain_device
+	all domain_device's ... (if past an expander)
+	    port
+		host adapter
+		     pci device
+			 and up the ladder, etc.
+
+DISCOVERY
+---------
+
+The sysfs tree has the following purposes:
+    a) It shows you the physical layout of the SAS domain at
+       the current time, i.e. how the domain looks in the
+       physical world right now.
+    b) Shows some device parameters _at_discovery_time_.
+
+This is a link to the tree(1) program, very useful in
+viewing the SAS domain:
+ftp://mama.indstate.edu/linux/tree/
+I expect user space applications to actually create a
+graphical interface of this.
+
+That is, the sysfs domain tree doesn't show or keep state if
+you e.g., change the meaning of the READY LED MEANING
+setting, but it does show you the current connection status
+of the domain device.
+
+Keeping internal device state changes is responsibility of
+upper layers (Command set drivers) and user space.
+
+When a device or devices are unplugged from the domain, this
+is reflected in the sysfs tree immediately, and the device(s)
+removed from the system.
+
+The structure domain_device describes any device in the SAS
+domain.  It is completely managed by the SAS layer.  A task
+points to a domain device, this is how the SAS LLDD knows
+where to send the task(s) to.  A SAS LLDD only reads the
+contents of the domain_device structure, but it never creates
+or destroys one.
+
+Expander management from User Space
+-----------------------------------
+
+In each expander directory in sysfs, there is a file called
+"smp_portal".  It is a binary sysfs attribute file, which
+implements an SMP portal (Note: this is *NOT* an SMP port),
+to which user space applications can send SMP requests and
+receive SMP responses.
+
+Functionality is deceptively simple:
+
+1. Build the SMP frame you want to send. The format and layout
+   is described in the SAS spec.  Leave the CRC field equal 0.
+open(2)
+2. Open the expander's SMP portal sysfs file in RW mode.
+write(2)
+3. Write the frame you built in 1.
+read(2)
+4. Read the amount of data you expect to receive for the frame you built.
+   If you receive different amount of data you expected to receive,
+   then there was some kind of error.
+close(2)
+All this process is shown in detail in the function do_smp_func()
+and its callers, in the file "expander_conf.c".
+
+The kernel functionality is implemented in the file
+"sas_expander.c".
+
+The program "expander_conf.c" implements this. It takes one
+argument, the sysfs file name of the SMP portal to the
+expander, and gives expander information, including routing
+tables.
+
+The SMP portal gives you complete control of the expander,
+so please be careful.
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d61662c1a0ee..7de5fdfdab67 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -209,7 +209,7 @@ config SCSI_LOGGING
 	  there should be no noticeable performance impact as long as you have
 	  logging turned off.
 
-menu "SCSI Transport Attributes"
+menu "SCSI Transports"
 	depends on SCSI
 
 config SCSI_SPI_ATTRS
@@ -242,6 +242,8 @@ config SCSI_SAS_ATTRS
 	  If you wish to export transport-specific information about
 	  each attached SAS device to sysfs, say Y.
 
+source "drivers/scsi/libsas/Kconfig"
+
 endmenu
 
 menu "SCSI low-level drivers"
@@ -431,6 +433,7 @@ config SCSI_AIC7XXX_OLD
 	  module will be called aic7xxx_old.
 
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
+source "drivers/scsi/aic94xx/Kconfig"
 
 # All the I2O code and drivers do not seem to be 64bit safe.
 config SCSI_DPT_I2O
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index b2de9bfdfdcd..83da70decdd1 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_SCSI_SPI_ATTRS)	+= scsi_transport_spi.o
 obj-$(CONFIG_SCSI_FC_ATTRS) 	+= scsi_transport_fc.o
 obj-$(CONFIG_SCSI_ISCSI_ATTRS)	+= scsi_transport_iscsi.o
 obj-$(CONFIG_SCSI_SAS_ATTRS)	+= scsi_transport_sas.o
+obj-$(CONFIG_SCSI_SAS_LIBSAS)	+= libsas/
 
 obj-$(CONFIG_ISCSI_TCP) 	+= libiscsi.o	iscsi_tcp.o
 obj-$(CONFIG_INFINIBAND_ISER) 	+= libiscsi.o
@@ -68,6 +69,7 @@ obj-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AIC79XX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AACRAID)	+= aacraid/
 obj-$(CONFIG_SCSI_AIC7XXX_OLD)	+= aic7xxx_old.o
+obj-$(CONFIG_SCSI_AIC94XX)	+= aic94xx/
 obj-$(CONFIG_SCSI_IPS)		+= ips.o
 obj-$(CONFIG_SCSI_FD_MCS)	+= fd_mcs.o
 obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
diff --git a/drivers/scsi/aic94xx/Kconfig b/drivers/scsi/aic94xx/Kconfig
new file mode 100644
index 000000000000..0ed391d8ee84
--- /dev/null
+++ b/drivers/scsi/aic94xx/Kconfig
@@ -0,0 +1,41 @@
+#
+# Kernel configuration file for aic94xx SAS/SATA driver.
+#
+# Copyright (c) 2005 Adaptec, Inc.  All rights reserved.
+# Copyright (c) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the aic94xx driver.
+#
+# The aic94xx driver is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The aic94xx driver is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Aic94xx Driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#
+
+config SCSI_AIC94XX
+	tristate "Adaptec AIC94xx SAS/SATA support"
+	depends on PCI
+	select SCSI_SAS_LIBSAS
+	help
+		This driver supports Adaptec's SAS/SATA 3Gb/s 64 bit PCI-X
+		AIC94xx chip based host adapters.
+
+config AIC94XX_DEBUG
+	bool "Compile in debug mode"
+	default y
+	depends on SCSI_AIC94XX
+	help
+		Compiles the aic94xx driver in debug mode.  In debug mode,
+		the driver prints some messages to the console.
diff --git a/drivers/scsi/aic94xx/Makefile b/drivers/scsi/aic94xx/Makefile
new file mode 100644
index 000000000000..e6b70123940c
--- /dev/null
+++ b/drivers/scsi/aic94xx/Makefile
@@ -0,0 +1,39 @@
+#
+# Makefile for Adaptec aic94xx SAS/SATA driver.
+#
+# Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the the aic94xx driver.
+#
+# The aic94xx driver is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The aic94xx driver is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the aic94xx driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+ifeq ($(CONFIG_AIC94XX_DEBUG),y)
+	EXTRA_CFLAGS += -DASD_DEBUG -DASD_ENTER_EXIT
+endif
+
+obj-$(CONFIG_SCSI_AIC94XX) += aic94xx.o
+aic94xx-y += aic94xx_init.o \
+	     aic94xx_hwi.o  \
+	     aic94xx_reg.o  \
+	     aic94xx_sds.o  \
+	     aic94xx_seq.o  \
+	     aic94xx_dump.o \
+	     aic94xx_scb.o  \
+	     aic94xx_dev.o  \
+	     aic94xx_tmf.o  \
+	     aic94xx_task.o
diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h
new file mode 100644
index 000000000000..cb7caf1c9ce1
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx.h
@@ -0,0 +1,114 @@
+/*
+ * Aic94xx SAS/SATA driver header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * $Id: //depot/aic94xx/aic94xx.h#31 $
+ */
+
+#ifndef _AIC94XX_H_
+#define _AIC94XX_H_
+
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <scsi/libsas.h>
+
+#define ASD_DRIVER_NAME		"aic94xx"
+#define ASD_DRIVER_DESCRIPTION	"Adaptec aic94xx SAS/SATA driver"
+
+#define asd_printk(fmt, ...)	printk(KERN_NOTICE ASD_DRIVER_NAME ": " fmt, ## __VA_ARGS__)
+
+#ifdef ASD_ENTER_EXIT
+#define ENTER  printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \
+		__FUNCTION__)
+#define EXIT   printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \
+		__FUNCTION__)
+#else
+#define ENTER
+#define EXIT
+#endif
+
+#ifdef ASD_DEBUG
+#define ASD_DPRINTK asd_printk
+#else
+#define ASD_DPRINTK(fmt, ...)
+#endif
+
+/* 2*ITNL timeout + 1 second */
+#define AIC94XX_SCB_TIMEOUT  (5*HZ)
+
+extern kmem_cache_t *asd_dma_token_cache;
+extern kmem_cache_t *asd_ascb_cache;
+extern char sas_addr_str[2*SAS_ADDR_SIZE + 1];
+
+static inline void asd_stringify_sas_addr(char *p, const u8 *sas_addr)
+{
+	int i;
+	for (i = 0; i < SAS_ADDR_SIZE; i++, p += 2)
+		snprintf(p, 3, "%02X", sas_addr[i]);
+	*p = '\0';
+}
+
+static inline void asd_destringify_sas_addr(u8 *sas_addr, const char *p)
+{
+	int i;
+	for (i = 0; i < SAS_ADDR_SIZE; i++) {
+		u8 h, l;
+		if (!*p)
+			break;
+		h = isdigit(*p) ? *p-'0' : *p-'A'+10;
+		p++;
+		l = isdigit(*p) ? *p-'0' : *p-'A'+10;
+		p++;
+		sas_addr[i] = (h<<4) | l;
+	}
+}
+
+struct asd_ha_struct;
+struct asd_ascb;
+
+int  asd_read_ocm(struct asd_ha_struct *asd_ha);
+int  asd_read_flash(struct asd_ha_struct *asd_ha);
+
+int  asd_dev_found(struct domain_device *dev);
+void asd_dev_gone(struct domain_device *dev);
+
+void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id);
+
+int  asd_execute_task(struct sas_task *, int num, unsigned long gfp_flags);
+
+/* ---------- TMFs ---------- */
+int  asd_abort_task(struct sas_task *);
+int  asd_abort_task_set(struct domain_device *, u8 *lun);
+int  asd_clear_aca(struct domain_device *, u8 *lun);
+int  asd_clear_task_set(struct domain_device *, u8 *lun);
+int  asd_lu_reset(struct domain_device *, u8 *lun);
+int  asd_query_task(struct sas_task *);
+
+/* ---------- Adapter and Port management ---------- */
+int  asd_clear_nexus_port(struct asd_sas_port *port);
+int  asd_clear_nexus_ha(struct sas_ha_struct *sas_ha);
+
+/* ---------- Phy Management ---------- */
+int  asd_control_phy(struct asd_sas_phy *phy, enum phy_func func);
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c
new file mode 100644
index 000000000000..6f8901b748f7
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_dev.c
@@ -0,0 +1,353 @@
+/*
+ * Aic94xx SAS/SATA DDB management
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_dev.c#21 $
+ */
+
+#include "aic94xx.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_sas.h"
+
+#define FIND_FREE_DDB(_ha) find_first_zero_bit((_ha)->hw_prof.ddb_bitmap, \
+					       (_ha)->hw_prof.max_ddbs)
+#define SET_DDB(_ddb, _ha) set_bit(_ddb, (_ha)->hw_prof.ddb_bitmap)
+#define CLEAR_DDB(_ddb, _ha) clear_bit(_ddb, (_ha)->hw_prof.ddb_bitmap)
+
+static inline int asd_get_ddb(struct asd_ha_struct *asd_ha)
+{
+	unsigned long flags;
+	int ddb, i;
+
+	spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
+	ddb = FIND_FREE_DDB(asd_ha);
+	if (ddb >= asd_ha->hw_prof.max_ddbs) {
+		ddb = -ENOMEM;
+		spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+		goto out;
+	}
+	SET_DDB(ddb, asd_ha);
+	spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+
+	for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4)
+		asd_ddbsite_write_dword(asd_ha, ddb, i, 0);
+out:
+	return ddb;
+}
+
+#define INIT_CONN_TAG   offsetof(struct asd_ddb_ssp_smp_target_port, init_conn_tag)
+#define DEST_SAS_ADDR   offsetof(struct asd_ddb_ssp_smp_target_port, dest_sas_addr)
+#define SEND_QUEUE_HEAD offsetof(struct asd_ddb_ssp_smp_target_port, send_queue_head)
+#define DDB_TYPE        offsetof(struct asd_ddb_ssp_smp_target_port, ddb_type)
+#define CONN_MASK       offsetof(struct asd_ddb_ssp_smp_target_port, conn_mask)
+#define DDB_TARG_FLAGS  offsetof(struct asd_ddb_ssp_smp_target_port, flags)
+#define DDB_TARG_FLAGS2 offsetof(struct asd_ddb_stp_sata_target_port, flags2)
+#define EXEC_QUEUE_TAIL offsetof(struct asd_ddb_ssp_smp_target_port, exec_queue_tail)
+#define SEND_QUEUE_TAIL offsetof(struct asd_ddb_ssp_smp_target_port, send_queue_tail)
+#define SISTER_DDB      offsetof(struct asd_ddb_ssp_smp_target_port, sister_ddb)
+#define MAX_CCONN       offsetof(struct asd_ddb_ssp_smp_target_port, max_concurrent_conn)
+#define NUM_CTX         offsetof(struct asd_ddb_ssp_smp_target_port, num_contexts)
+#define ATA_CMD_SCBPTR  offsetof(struct asd_ddb_stp_sata_target_port, ata_cmd_scbptr)
+#define SATA_TAG_ALLOC_MASK offsetof(struct asd_ddb_stp_sata_target_port, sata_tag_alloc_mask)
+#define NUM_SATA_TAGS   offsetof(struct asd_ddb_stp_sata_target_port, num_sata_tags)
+#define SATA_STATUS     offsetof(struct asd_ddb_stp_sata_target_port, sata_status)
+#define NCQ_DATA_SCB_PTR offsetof(struct asd_ddb_stp_sata_target_port, ncq_data_scb_ptr)
+#define ITNL_TIMEOUT    offsetof(struct asd_ddb_ssp_smp_target_port, itnl_timeout)
+
+static inline void asd_free_ddb(struct asd_ha_struct *asd_ha, int ddb)
+{
+	unsigned long flags;
+
+	if (!ddb || ddb >= 0xFFFF)
+		return;
+	asd_ddbsite_write_byte(asd_ha, ddb, DDB_TYPE, DDB_TYPE_UNUSED);
+	spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
+	CLEAR_DDB(ddb, asd_ha);
+	spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+}
+
+static inline void asd_set_ddb_type(struct domain_device *dev)
+{
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	int ddb = (int) (unsigned long) dev->lldd_dev;
+
+	if (dev->dev_type == SATA_PM_PORT)
+		asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_PM_PORT);
+	else if (dev->tproto)
+		asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_TARGET);
+	else
+		asd_ddbsite_write_byte(asd_ha,ddb,DDB_TYPE,DDB_TYPE_INITIATOR);
+}
+
+static int asd_init_sata_tag_ddb(struct domain_device *dev)
+{
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	int ddb, i;
+
+	ddb = asd_get_ddb(asd_ha);
+	if (ddb < 0)
+		return ddb;
+
+	for (i = 0; i < sizeof(struct asd_ddb_sata_tag); i += 2)
+		asd_ddbsite_write_word(asd_ha, ddb, i, 0xFFFF);
+
+	asd_ddbsite_write_word(asd_ha, (int) (unsigned long) dev->lldd_dev,
+			       SISTER_DDB, ddb);
+	return 0;
+}
+
+static inline int asd_init_sata(struct domain_device *dev)
+{
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	int ddb = (int) (unsigned long) dev->lldd_dev;
+	u32 qdepth = 0;
+	int res = 0;
+
+	asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
+	if ((dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) &&
+	    dev->sata_dev.identify_device &&
+	    dev->sata_dev.identify_device[10] != 0) {
+		u16 w75 = le16_to_cpu(dev->sata_dev.identify_device[75]);
+		u16 w76 = le16_to_cpu(dev->sata_dev.identify_device[76]);
+
+		if (w76 & 0x100) /* NCQ? */
+			qdepth = (w75 & 0x1F) + 1;
+		asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK,
+					(1<<qdepth)-1);
+		asd_ddbsite_write_byte(asd_ha, ddb, NUM_SATA_TAGS, qdepth);
+	}
+	if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
+	    dev->dev_type == SATA_PM_PORT) {
+		struct dev_to_host_fis *fis = (struct dev_to_host_fis *)
+			dev->frame_rcvd;
+		asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status);
+	}
+	asd_ddbsite_write_word(asd_ha, ddb, NCQ_DATA_SCB_PTR, 0xFFFF);
+	if (qdepth > 0)
+		res = asd_init_sata_tag_ddb(dev);
+	return res;
+}
+
+static int asd_init_target_ddb(struct domain_device *dev)
+{
+	int ddb, i;
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	u8 flags = 0;
+
+	ddb = asd_get_ddb(asd_ha);
+	if (ddb < 0)
+		return ddb;
+
+	dev->lldd_dev = (void *) (unsigned long) ddb;
+
+	asd_ddbsite_write_byte(asd_ha, ddb, 0, DDB_TP_CONN_TYPE);
+	asd_ddbsite_write_byte(asd_ha, ddb, 1, 0);
+	asd_ddbsite_write_word(asd_ha, ddb, INIT_CONN_TAG, 0xFFFF);
+	for (i = 0; i < SAS_ADDR_SIZE; i++)
+		asd_ddbsite_write_byte(asd_ha, ddb, DEST_SAS_ADDR+i,
+				       dev->sas_addr[i]);
+	asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_HEAD, 0xFFFF);
+	asd_set_ddb_type(dev);
+	asd_ddbsite_write_byte(asd_ha, ddb, CONN_MASK, dev->port->phy_mask);
+	if (dev->port->oob_mode != SATA_OOB_MODE) {
+		flags |= OPEN_REQUIRED;
+		if ((dev->dev_type == SATA_DEV) ||
+		    (dev->tproto & SAS_PROTO_STP)) {
+			struct smp_resp *rps_resp = &dev->sata_dev.rps_resp;
+			if (rps_resp->frame_type == SMP_RESPONSE &&
+			    rps_resp->function == SMP_REPORT_PHY_SATA &&
+			    rps_resp->result == SMP_RESP_FUNC_ACC) {
+				if (rps_resp->rps.affil_valid)
+					flags |= STP_AFFIL_POL;
+				if (rps_resp->rps.affil_supp)
+					flags |= SUPPORTS_AFFIL;
+			}
+		} else {
+			flags |= CONCURRENT_CONN_SUPP;
+			if (!dev->parent &&
+			    (dev->dev_type == EDGE_DEV ||
+			     dev->dev_type == FANOUT_DEV))
+				asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
+						       4);
+			else
+				asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
+						       dev->pathways);
+			asd_ddbsite_write_byte(asd_ha, ddb, NUM_CTX, 1);
+		}
+	}
+	if (dev->dev_type == SATA_PM)
+		flags |= SATA_MULTIPORT;
+	asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags);
+
+	flags = 0;
+	if (dev->tproto & SAS_PROTO_STP)
+		flags |= STP_CL_POL_NO_TX;
+	asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS2, flags);
+
+	asd_ddbsite_write_word(asd_ha, ddb, EXEC_QUEUE_TAIL, 0xFFFF);
+	asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF);
+	asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
+
+	if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTO_STP)) {
+		i = asd_init_sata(dev);
+		if (i < 0) {
+			asd_free_ddb(asd_ha, ddb);
+			return i;
+		}
+	}
+
+	if (dev->dev_type == SAS_END_DEV) {
+		struct sas_end_device *rdev = rphy_to_end_device(dev->rphy);
+		if (rdev->I_T_nexus_loss_timeout > 0)
+			asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT,
+					       min(rdev->I_T_nexus_loss_timeout,
+						   (u16)ITNL_TIMEOUT_CONST));
+		else
+			asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT,
+					       (u16)ITNL_TIMEOUT_CONST);
+	}
+	return 0;
+}
+
+static int asd_init_sata_pm_table_ddb(struct domain_device *dev)
+{
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	int ddb, i;
+
+	ddb = asd_get_ddb(asd_ha);
+	if (ddb < 0)
+		return ddb;
+
+	for (i = 0; i < 32; i += 2)
+		asd_ddbsite_write_word(asd_ha, ddb, i, 0xFFFF);
+
+	asd_ddbsite_write_word(asd_ha, (int) (unsigned long) dev->lldd_dev,
+			       SISTER_DDB, ddb);
+
+	return 0;
+}
+
+#define PM_PORT_FLAGS offsetof(struct asd_ddb_sata_pm_port, pm_port_flags)
+#define PARENT_DDB    offsetof(struct asd_ddb_sata_pm_port, parent_ddb)
+
+/**
+ * asd_init_sata_pm_port_ddb -- SATA Port Multiplier Port
+ * dev: pointer to domain device
+ *
+ * For SATA Port Multiplier Ports we need to allocate one SATA Port
+ * Multiplier Port DDB and depending on whether the target on it
+ * supports SATA II NCQ, one SATA Tag DDB.
+ */
+static int asd_init_sata_pm_port_ddb(struct domain_device *dev)
+{
+	int ddb, i, parent_ddb, pmtable_ddb;
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	u8  flags;
+
+	ddb = asd_get_ddb(asd_ha);
+	if (ddb < 0)
+		return ddb;
+
+	asd_set_ddb_type(dev);
+	flags = (dev->sata_dev.port_no << 4) | PM_PORT_SET;
+	asd_ddbsite_write_byte(asd_ha, ddb, PM_PORT_FLAGS, flags);
+	asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
+	asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
+	asd_init_sata(dev);
+
+	parent_ddb = (int) (unsigned long) dev->parent->lldd_dev;
+	asd_ddbsite_write_word(asd_ha, ddb, PARENT_DDB, parent_ddb);
+	pmtable_ddb = asd_ddbsite_read_word(asd_ha, parent_ddb, SISTER_DDB);
+	asd_ddbsite_write_word(asd_ha, pmtable_ddb, dev->sata_dev.port_no,ddb);
+
+	if (asd_ddbsite_read_byte(asd_ha, ddb, NUM_SATA_TAGS) > 0) {
+		i = asd_init_sata_tag_ddb(dev);
+		if (i < 0) {
+			asd_free_ddb(asd_ha, ddb);
+			return i;
+		}
+	}
+	return 0;
+}
+
+static int asd_init_initiator_ddb(struct domain_device *dev)
+{
+	return -ENODEV;
+}
+
+/**
+ * asd_init_sata_pm_ddb -- SATA Port Multiplier
+ * dev: pointer to domain device
+ *
+ * For STP and direct-attached SATA Port Multipliers we need
+ * one target port DDB entry and one SATA PM table DDB entry.
+ */
+static int asd_init_sata_pm_ddb(struct domain_device *dev)
+{
+	int res = 0;
+
+	res = asd_init_target_ddb(dev);
+	if (res)
+		goto out;
+	res = asd_init_sata_pm_table_ddb(dev);
+	if (res)
+		asd_free_ddb(dev->port->ha->lldd_ha,
+			     (int) (unsigned long) dev->lldd_dev);
+out:
+	return res;
+}
+
+int asd_dev_found(struct domain_device *dev)
+{
+	int res = 0;
+
+	switch (dev->dev_type) {
+	case SATA_PM:
+		res = asd_init_sata_pm_ddb(dev);
+		break;
+	case SATA_PM_PORT:
+		res = asd_init_sata_pm_port_ddb(dev);
+		break;
+	default:
+		if (dev->tproto)
+			res = asd_init_target_ddb(dev);
+		else
+			res = asd_init_initiator_ddb(dev);
+	}
+	return res;
+}
+
+void asd_dev_gone(struct domain_device *dev)
+{
+	int ddb, sister_ddb;
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+
+	ddb = (int) (unsigned long) dev->lldd_dev;
+	sister_ddb = asd_ddbsite_read_word(asd_ha, ddb, SISTER_DDB);
+
+	if (sister_ddb != 0xFFFF)
+		asd_free_ddb(asd_ha, sister_ddb);
+	asd_free_ddb(asd_ha, ddb);
+	dev->lldd_dev = NULL;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_dump.c b/drivers/scsi/aic94xx/aic94xx_dump.c
new file mode 100644
index 000000000000..e6ade5996d95
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_dump.c
@@ -0,0 +1,959 @@
+/*
+ * Aic94xx SAS/SATA driver dump interface.
+ *
+ * Copyright (C) 2004 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * 2005/07/14/LT  Complete overhaul of this file.  Update pages, register
+ * locations, names, etc.  Make use of macros.  Print more information.
+ * Print all cseq and lseq mip and mdp.
+ *
+ */
+
+#include "linux/pci.h"
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_reg_def.h"
+#include "aic94xx_sas.h"
+
+#include "aic94xx_dump.h"
+
+#ifdef ASD_DEBUG
+
+#define MD(x)	    (1 << (x))
+#define MODE_COMMON (1 << 31)
+#define MODE_0_7    (0xFF)
+
+static const struct lseq_cio_regs {
+	char	*name;
+	u32	offs;
+	u8	width;
+	u32	mode;
+} LSEQmCIOREGS[] = {
+	{"LmMnSCBPTR",    0x20, 16, MD(0)|MD(1)|MD(2)|MD(3)|MD(4) },
+	{"LmMnDDBPTR",    0x22, 16, MD(0)|MD(1)|MD(2)|MD(3)|MD(4) },
+	{"LmREQMBX",      0x30, 32, MODE_COMMON },
+	{"LmRSPMBX",      0x34, 32, MODE_COMMON },
+	{"LmMnINT",       0x38, 32, MODE_0_7 },
+	{"LmMnINTEN",     0x3C, 32, MODE_0_7 },
+	{"LmXMTPRIMD",    0x40, 32, MODE_COMMON },
+	{"LmXMTPRIMCS",   0x44,  8, MODE_COMMON },
+	{"LmCONSTAT",     0x45,  8, MODE_COMMON },
+	{"LmMnDMAERRS",   0x46,  8, MD(0)|MD(1) },
+	{"LmMnSGDMAERRS", 0x47,  8, MD(0)|MD(1) },
+	{"LmMnEXPHDRP",   0x48,  8, MD(0) },
+	{"LmMnSASAALIGN", 0x48,  8, MD(1) },
+	{"LmMnMSKHDRP",   0x49,  8, MD(0) },
+	{"LmMnSTPALIGN",  0x49,  8, MD(1) },
+	{"LmMnRCVHDRP",   0x4A,  8, MD(0) },
+	{"LmMnXMTHDRP",   0x4A,  8, MD(1) },
+	{"LmALIGNMODE",   0x4B,  8, MD(1) },
+	{"LmMnEXPRCVCNT", 0x4C, 32, MD(0) },
+	{"LmMnXMTCNT",    0x4C, 32, MD(1) },
+	{"LmMnCURRTAG",   0x54, 16, MD(0) },
+	{"LmMnPREVTAG",   0x56, 16, MD(0) },
+	{"LmMnACKOFS",    0x58,  8, MD(1) },
+	{"LmMnXFRLVL",    0x59,  8, MD(0)|MD(1) },
+	{"LmMnSGDMACTL",  0x5A,  8, MD(0)|MD(1) },
+	{"LmMnSGDMASTAT", 0x5B,  8, MD(0)|MD(1) },
+	{"LmMnDDMACTL",   0x5C,  8, MD(0)|MD(1) },
+	{"LmMnDDMASTAT",  0x5D,  8, MD(0)|MD(1) },
+	{"LmMnDDMAMODE",  0x5E, 16, MD(0)|MD(1) },
+	{"LmMnPIPECTL",   0x61,  8, MD(0)|MD(1) },
+	{"LmMnACTSCB",    0x62, 16, MD(0)|MD(1) },
+	{"LmMnSGBHADR",   0x64,  8, MD(0)|MD(1) },
+	{"LmMnSGBADR",    0x65,  8, MD(0)|MD(1) },
+	{"LmMnSGDCNT",    0x66,  8, MD(0)|MD(1) },
+	{"LmMnSGDMADR",   0x68, 32, MD(0)|MD(1) },
+	{"LmMnSGDMADR",   0x6C, 32, MD(0)|MD(1) },
+	{"LmMnXFRCNT",    0x70, 32, MD(0)|MD(1) },
+	{"LmMnXMTCRC",    0x74, 32, MD(1) },
+	{"LmCURRTAG",     0x74, 16, MD(0) },
+	{"LmPREVTAG",     0x76, 16, MD(0) },
+	{"LmMnDPSEL",     0x7B,  8, MD(0)|MD(1) },
+	{"LmDPTHSTAT",    0x7C,  8, MODE_COMMON },
+	{"LmMnHOLDLVL",   0x7D,  8, MD(0) },
+	{"LmMnSATAFS",    0x7E,  8, MD(1) },
+	{"LmMnCMPLTSTAT", 0x7F,  8, MD(0)|MD(1) },
+	{"LmPRMSTAT0",    0x80, 32, MODE_COMMON },
+	{"LmPRMSTAT1",    0x84, 32, MODE_COMMON },
+	{"LmGPRMINT",     0x88,  8, MODE_COMMON },
+        {"LmMnCURRSCB",   0x8A, 16, MD(0) },
+	{"LmPRMICODE",    0x8C, 32, MODE_COMMON },
+	{"LmMnRCVCNT",    0x90, 16, MD(0) },
+	{"LmMnBUFSTAT",   0x92, 16, MD(0) },
+	{"LmMnXMTHDRSIZE",0x92,  8, MD(1) },
+	{"LmMnXMTSIZE",   0x93,  8, MD(1) },
+	{"LmMnTGTXFRCNT", 0x94, 32, MD(0) },
+	{"LmMnEXPROFS",   0x98, 32, MD(0) },
+	{"LmMnXMTROFS",   0x98, 32, MD(1) },
+	{"LmMnRCVROFS",   0x9C, 32, MD(0) },
+	{"LmCONCTL",      0xA0, 16, MODE_COMMON },
+	{"LmBITLTIMER",   0xA2, 16, MODE_COMMON },
+	{"LmWWNLOW",      0xA8, 32, MODE_COMMON },
+	{"LmWWNHIGH",     0xAC, 32, MODE_COMMON },
+	{"LmMnFRMERR",    0xB0, 32, MD(0) },
+	{"LmMnFRMERREN",  0xB4, 32, MD(0) },
+	{"LmAWTIMER",     0xB8, 16, MODE_COMMON },
+	{"LmAWTCTL",      0xBA,  8, MODE_COMMON },
+	{"LmMnHDRCMPS",   0xC0, 32, MD(0) },
+	{"LmMnXMTSTAT",   0xC4,  8, MD(1) },
+	{"LmHWTSTATEN",   0xC5,  8, MODE_COMMON },
+	{"LmMnRRDYRC",    0xC6,  8, MD(0) },
+        {"LmMnRRDYTC",    0xC6,  8, MD(1) },
+	{"LmHWTSTAT",     0xC7,  8, MODE_COMMON },
+	{"LmMnDATABUFADR",0xC8, 16, MD(0)|MD(1) },
+	{"LmDWSSTATUS",   0xCB,  8, MODE_COMMON },
+	{"LmMnACTSTAT",   0xCE, 16, MD(0)|MD(1) },
+	{"LmMnREQSCB",    0xD2, 16, MD(0)|MD(1) },
+	{"LmXXXPRIM",     0xD4, 32, MODE_COMMON },
+	{"LmRCVASTAT",    0xD9,  8, MODE_COMMON },
+	{"LmINTDIS1",     0xDA,  8, MODE_COMMON },
+	{"LmPSTORESEL",   0xDB,  8, MODE_COMMON },
+	{"LmPSTORE",      0xDC, 32, MODE_COMMON },
+	{"LmPRIMSTAT0EN", 0xE0, 32, MODE_COMMON },
+	{"LmPRIMSTAT1EN", 0xE4, 32, MODE_COMMON },
+	{"LmDONETCTL",    0xF2, 16, MODE_COMMON },
+	{NULL, 0, 0, 0 }
+};
+/*
+static struct lseq_cio_regs LSEQmOOBREGS[] = {
+   {"OOB_BFLTR"        ,0x100, 8, MD(5)},
+   {"OOB_INIT_MIN"     ,0x102,16, MD(5)},
+   {"OOB_INIT_MAX"     ,0x104,16, MD(5)},
+   {"OOB_INIT_NEG"     ,0x106,16, MD(5)},
+   {"OOB_SAS_MIN"      ,0x108,16, MD(5)},
+   {"OOB_SAS_MAX"      ,0x10A,16, MD(5)},
+   {"OOB_SAS_NEG"      ,0x10C,16, MD(5)},
+   {"OOB_WAKE_MIN"     ,0x10E,16, MD(5)},
+   {"OOB_WAKE_MAX"     ,0x110,16, MD(5)},
+   {"OOB_WAKE_NEG"     ,0x112,16, MD(5)},
+   {"OOB_IDLE_MAX"     ,0x114,16, MD(5)},
+   {"OOB_BURST_MAX"    ,0x116,16, MD(5)},
+   {"OOB_XMIT_BURST"   ,0x118, 8, MD(5)},
+   {"OOB_SEND_PAIRS"   ,0x119, 8, MD(5)},
+   {"OOB_INIT_IDLE"    ,0x11A, 8, MD(5)},
+   {"OOB_INIT_NEGO"    ,0x11C, 8, MD(5)},
+   {"OOB_SAS_IDLE"     ,0x11E, 8, MD(5)},
+   {"OOB_SAS_NEGO"     ,0x120, 8, MD(5)},
+   {"OOB_WAKE_IDLE"    ,0x122, 8, MD(5)},
+   {"OOB_WAKE_NEGO"    ,0x124, 8, MD(5)},
+   {"OOB_DATA_KBITS"   ,0x126, 8, MD(5)},
+   {"OOB_BURST_DATA"   ,0x128,32, MD(5)},
+   {"OOB_ALIGN_0_DATA" ,0x12C,32, MD(5)},
+   {"OOB_ALIGN_1_DATA" ,0x130,32, MD(5)},
+   {"OOB_SYNC_DATA"    ,0x134,32, MD(5)},
+   {"OOB_D10_2_DATA"   ,0x138,32, MD(5)},
+   {"OOB_PHY_RST_CNT"  ,0x13C,32, MD(5)},
+   {"OOB_SIG_GEN"      ,0x140, 8, MD(5)},
+   {"OOB_XMIT"         ,0x141, 8, MD(5)},
+   {"FUNCTION_MAKS"    ,0x142, 8, MD(5)},
+   {"OOB_MODE"         ,0x143, 8, MD(5)},
+   {"CURRENT_STATUS"   ,0x144, 8, MD(5)},
+   {"SPEED_MASK"       ,0x145, 8, MD(5)},
+   {"PRIM_COUNT"       ,0x146, 8, MD(5)},
+   {"OOB_SIGNALS"      ,0x148, 8, MD(5)},
+   {"OOB_DATA_DET"     ,0x149, 8, MD(5)},
+   {"OOB_TIME_OUT"     ,0x14C, 8, MD(5)},
+   {"OOB_TIMER_ENABLE" ,0x14D, 8, MD(5)},
+   {"OOB_STATUS"       ,0x14E, 8, MD(5)},
+   {"HOT_PLUG_DELAY"   ,0x150, 8, MD(5)},
+   {"RCD_DELAY"        ,0x151, 8, MD(5)},
+   {"COMSAS_TIMER"     ,0x152, 8, MD(5)},
+   {"SNTT_DELAY"       ,0x153, 8, MD(5)},
+   {"SPD_CHNG_DELAY"   ,0x154, 8, MD(5)},
+   {"SNLT_DELAY"       ,0x155, 8, MD(5)},
+   {"SNWT_DELAY"       ,0x156, 8, MD(5)},
+   {"ALIGN_DELAY"      ,0x157, 8, MD(5)},
+   {"INT_ENABLE_0"     ,0x158, 8, MD(5)},
+   {"INT_ENABLE_1"     ,0x159, 8, MD(5)},
+   {"INT_ENABLE_2"     ,0x15A, 8, MD(5)},
+   {"INT_ENABLE_3"     ,0x15B, 8, MD(5)},
+   {"OOB_TEST_REG"     ,0x15C, 8, MD(5)},
+   {"PHY_CONTROL_0"    ,0x160, 8, MD(5)},
+   {"PHY_CONTROL_1"    ,0x161, 8, MD(5)},
+   {"PHY_CONTROL_2"    ,0x162, 8, MD(5)},
+   {"PHY_CONTROL_3"    ,0x163, 8, MD(5)},
+   {"PHY_OOB_CAL_TX"   ,0x164, 8, MD(5)},
+   {"PHY_OOB_CAL_RX"   ,0x165, 8, MD(5)},
+   {"OOB_PHY_CAL_TX"   ,0x166, 8, MD(5)},
+   {"OOB_PHY_CAL_RX"   ,0x167, 8, MD(5)},
+   {"PHY_CONTROL_4"    ,0x168, 8, MD(5)},
+   {"PHY_TEST"         ,0x169, 8, MD(5)},
+   {"PHY_PWR_CTL"      ,0x16A, 8, MD(5)},
+   {"PHY_PWR_DELAY"    ,0x16B, 8, MD(5)},
+   {"OOB_SM_CON"       ,0x16C, 8, MD(5)},
+   {"ADDR_TRAP_1"      ,0x16D, 8, MD(5)},
+   {"ADDR_NEXT_1"      ,0x16E, 8, MD(5)},
+   {"NEXT_ST_1"        ,0x16F, 8, MD(5)},
+   {"OOB_SM_STATE"     ,0x170, 8, MD(5)},
+   {"ADDR_TRAP_2"      ,0x171, 8, MD(5)},
+   {"ADDR_NEXT_2"      ,0x172, 8, MD(5)},
+   {"NEXT_ST_2"        ,0x173, 8, MD(5)},
+   {NULL, 0, 0, 0 }
+};
+*/
+#define STR_8BIT   "   %30s[0x%04x]:0x%02x\n"
+#define STR_16BIT  "   %30s[0x%04x]:0x%04x\n"
+#define STR_32BIT  "   %30s[0x%04x]:0x%08x\n"
+#define STR_64BIT  "   %30s[0x%04x]:0x%llx\n"
+
+#define PRINT_REG_8bit(_ha, _n, _r) asd_printk(STR_8BIT, #_n, _n,      \
+					     asd_read_reg_byte(_ha, _r))
+#define PRINT_REG_16bit(_ha, _n, _r) asd_printk(STR_16BIT, #_n, _n,     \
+					      asd_read_reg_word(_ha, _r))
+#define PRINT_REG_32bit(_ha, _n, _r) asd_printk(STR_32BIT, #_n, _n,      \
+					      asd_read_reg_dword(_ha, _r))
+
+#define PRINT_CREG_8bit(_ha, _n) asd_printk(STR_8BIT, #_n, _n,      \
+					     asd_read_reg_byte(_ha, C##_n))
+#define PRINT_CREG_16bit(_ha, _n) asd_printk(STR_16BIT, #_n, _n,     \
+					      asd_read_reg_word(_ha, C##_n))
+#define PRINT_CREG_32bit(_ha, _n) asd_printk(STR_32BIT, #_n, _n,      \
+					      asd_read_reg_dword(_ha, C##_n))
+
+#define MSTR_8BIT   "   Mode:%02d %30s[0x%04x]:0x%02x\n"
+#define MSTR_16BIT  "   Mode:%02d %30s[0x%04x]:0x%04x\n"
+#define MSTR_32BIT  "   Mode:%02d %30s[0x%04x]:0x%08x\n"
+
+#define PRINT_MREG_8bit(_ha, _m, _n, _r) asd_printk(MSTR_8BIT, _m, #_n, _n,   \
+					     asd_read_reg_byte(_ha, _r))
+#define PRINT_MREG_16bit(_ha, _m, _n, _r) asd_printk(MSTR_16BIT, _m, #_n, _n, \
+					      asd_read_reg_word(_ha, _r))
+#define PRINT_MREG_32bit(_ha, _m, _n, _r) asd_printk(MSTR_32BIT, _m, #_n, _n, \
+					      asd_read_reg_dword(_ha, _r))
+
+/* can also be used for MD when the register is mode aware already */
+#define PRINT_MIS_byte(_ha, _n) asd_printk(STR_8BIT, #_n,CSEQ_##_n-CMAPPEDSCR,\
+                                           asd_read_reg_byte(_ha, CSEQ_##_n))
+#define PRINT_MIS_word(_ha, _n) asd_printk(STR_16BIT,#_n,CSEQ_##_n-CMAPPEDSCR,\
+                                           asd_read_reg_word(_ha, CSEQ_##_n))
+#define PRINT_MIS_dword(_ha, _n)                      \
+        asd_printk(STR_32BIT,#_n,CSEQ_##_n-CMAPPEDSCR,\
+                   asd_read_reg_dword(_ha, CSEQ_##_n))
+#define PRINT_MIS_qword(_ha, _n)                                       \
+        asd_printk(STR_64BIT, #_n,CSEQ_##_n-CMAPPEDSCR,                \
+                   (unsigned long long)(((u64)asd_read_reg_dword(_ha, CSEQ_##_n))     \
+                 | (((u64)asd_read_reg_dword(_ha, (CSEQ_##_n)+4))<<32)))
+
+#define CMDP_REG(_n, _m) (_m*(CSEQ_PAGE_SIZE*2)+CSEQ_##_n)
+#define PRINT_CMDP_word(_ha, _n) \
+asd_printk("%20s 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n", \
+	#_n, \
+	asd_read_reg_word(_ha, CMDP_REG(_n, 0)), \
+	asd_read_reg_word(_ha, CMDP_REG(_n, 1)), \
+	asd_read_reg_word(_ha, CMDP_REG(_n, 2)), \
+	asd_read_reg_word(_ha, CMDP_REG(_n, 3)), \
+	asd_read_reg_word(_ha, CMDP_REG(_n, 4)), \
+	asd_read_reg_word(_ha, CMDP_REG(_n, 5)), \
+	asd_read_reg_word(_ha, CMDP_REG(_n, 6)), \
+	asd_read_reg_word(_ha, CMDP_REG(_n, 7)))
+
+#define PRINT_CMDP_byte(_ha, _n) \
+asd_printk("%20s 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n", \
+	#_n, \
+	asd_read_reg_byte(_ha, CMDP_REG(_n, 0)), \
+	asd_read_reg_byte(_ha, CMDP_REG(_n, 1)), \
+	asd_read_reg_byte(_ha, CMDP_REG(_n, 2)), \
+	asd_read_reg_byte(_ha, CMDP_REG(_n, 3)), \
+	asd_read_reg_byte(_ha, CMDP_REG(_n, 4)), \
+	asd_read_reg_byte(_ha, CMDP_REG(_n, 5)), \
+	asd_read_reg_byte(_ha, CMDP_REG(_n, 6)), \
+	asd_read_reg_byte(_ha, CMDP_REG(_n, 7)))
+
+static void asd_dump_cseq_state(struct asd_ha_struct *asd_ha)
+{
+	int mode;
+
+	asd_printk("CSEQ STATE\n");
+
+	asd_printk("ARP2 REGISTERS\n");
+
+	PRINT_CREG_32bit(asd_ha, ARP2CTL);
+	PRINT_CREG_32bit(asd_ha, ARP2INT);
+	PRINT_CREG_32bit(asd_ha, ARP2INTEN);
+	PRINT_CREG_8bit(asd_ha, MODEPTR);
+	PRINT_CREG_8bit(asd_ha, ALTMODE);
+	PRINT_CREG_8bit(asd_ha, FLAG);
+	PRINT_CREG_8bit(asd_ha, ARP2INTCTL);
+	PRINT_CREG_16bit(asd_ha, STACK);
+	PRINT_CREG_16bit(asd_ha, PRGMCNT);
+	PRINT_CREG_16bit(asd_ha, ACCUM);
+	PRINT_CREG_16bit(asd_ha, SINDEX);
+	PRINT_CREG_16bit(asd_ha, DINDEX);
+	PRINT_CREG_8bit(asd_ha, SINDIR);
+	PRINT_CREG_8bit(asd_ha, DINDIR);
+	PRINT_CREG_8bit(asd_ha, JUMLDIR);
+	PRINT_CREG_8bit(asd_ha, ARP2HALTCODE);
+	PRINT_CREG_16bit(asd_ha, CURRADDR);
+	PRINT_CREG_16bit(asd_ha, LASTADDR);
+	PRINT_CREG_16bit(asd_ha, NXTLADDR);
+
+	asd_printk("IOP REGISTERS\n");
+
+	PRINT_REG_32bit(asd_ha, BISTCTL1, CBISTCTL);
+	PRINT_CREG_32bit(asd_ha, MAPPEDSCR);
+
+	asd_printk("CIO REGISTERS\n");
+
+	for (mode = 0; mode < 9; mode++)
+		PRINT_MREG_16bit(asd_ha, mode, MnSCBPTR, CMnSCBPTR(mode));
+	PRINT_MREG_16bit(asd_ha, 15, MnSCBPTR, CMnSCBPTR(15));
+
+	for (mode = 0; mode < 9; mode++)
+		PRINT_MREG_16bit(asd_ha, mode, MnDDBPTR, CMnDDBPTR(mode));
+	PRINT_MREG_16bit(asd_ha, 15, MnDDBPTR, CMnDDBPTR(15));
+
+	for (mode = 0; mode < 8; mode++)
+		PRINT_MREG_32bit(asd_ha, mode, MnREQMBX, CMnREQMBX(mode));
+	for (mode = 0; mode < 8; mode++)
+		PRINT_MREG_32bit(asd_ha, mode, MnRSPMBX, CMnRSPMBX(mode));
+	for (mode = 0; mode < 8; mode++)
+		PRINT_MREG_32bit(asd_ha, mode, MnINT, CMnINT(mode));
+	for (mode = 0; mode < 8; mode++)
+		PRINT_MREG_32bit(asd_ha, mode, MnINTEN, CMnINTEN(mode));
+
+	PRINT_CREG_8bit(asd_ha, SCRATCHPAGE);
+	for (mode = 0; mode < 8; mode++)
+		PRINT_MREG_8bit(asd_ha, mode, MnSCRATCHPAGE,
+				CMnSCRATCHPAGE(mode));
+
+	PRINT_REG_32bit(asd_ha, CLINKCON, CLINKCON);
+	PRINT_REG_8bit(asd_ha, CCONMSK, CCONMSK);
+	PRINT_REG_8bit(asd_ha, CCONEXIST, CCONEXIST);
+	PRINT_REG_16bit(asd_ha, CCONMODE, CCONMODE);
+	PRINT_REG_32bit(asd_ha, CTIMERCALC, CTIMERCALC);
+	PRINT_REG_8bit(asd_ha, CINTDIS, CINTDIS);
+
+	asd_printk("SCRATCH MEMORY\n");
+
+	asd_printk("MIP 4 >>>>>\n");
+	PRINT_MIS_word(asd_ha, Q_EXE_HEAD);
+	PRINT_MIS_word(asd_ha, Q_EXE_TAIL);
+	PRINT_MIS_word(asd_ha, Q_DONE_HEAD);
+	PRINT_MIS_word(asd_ha, Q_DONE_TAIL);
+	PRINT_MIS_word(asd_ha, Q_SEND_HEAD);
+	PRINT_MIS_word(asd_ha, Q_SEND_TAIL);
+	PRINT_MIS_word(asd_ha, Q_DMA2CHIM_HEAD);
+	PRINT_MIS_word(asd_ha, Q_DMA2CHIM_TAIL);
+	PRINT_MIS_word(asd_ha, Q_COPY_HEAD);
+	PRINT_MIS_word(asd_ha, Q_COPY_TAIL);
+	PRINT_MIS_word(asd_ha, REG0);
+	PRINT_MIS_word(asd_ha, REG1);
+	PRINT_MIS_dword(asd_ha, REG2);
+	PRINT_MIS_byte(asd_ha, LINK_CTL_Q_MAP);
+	PRINT_MIS_byte(asd_ha, MAX_CSEQ_MODE);
+	PRINT_MIS_byte(asd_ha, FREE_LIST_HACK_COUNT);
+
+	asd_printk("MIP 5 >>>>\n");
+	PRINT_MIS_qword(asd_ha, EST_NEXUS_REQ_QUEUE);
+	PRINT_MIS_qword(asd_ha, EST_NEXUS_REQ_COUNT);
+	PRINT_MIS_word(asd_ha, Q_EST_NEXUS_HEAD);
+	PRINT_MIS_word(asd_ha, Q_EST_NEXUS_TAIL);
+	PRINT_MIS_word(asd_ha, NEED_EST_NEXUS_SCB);
+	PRINT_MIS_byte(asd_ha, EST_NEXUS_REQ_HEAD);
+	PRINT_MIS_byte(asd_ha, EST_NEXUS_REQ_TAIL);
+	PRINT_MIS_byte(asd_ha, EST_NEXUS_SCB_OFFSET);
+
+	asd_printk("MIP 6 >>>>\n");
+	PRINT_MIS_word(asd_ha, INT_ROUT_RET_ADDR0);
+	PRINT_MIS_word(asd_ha, INT_ROUT_RET_ADDR1);
+	PRINT_MIS_word(asd_ha, INT_ROUT_SCBPTR);
+	PRINT_MIS_byte(asd_ha, INT_ROUT_MODE);
+	PRINT_MIS_byte(asd_ha, ISR_SCRATCH_FLAGS);
+	PRINT_MIS_word(asd_ha, ISR_SAVE_SINDEX);
+	PRINT_MIS_word(asd_ha, ISR_SAVE_DINDEX);
+	PRINT_MIS_word(asd_ha, Q_MONIRTT_HEAD);
+	PRINT_MIS_word(asd_ha, Q_MONIRTT_TAIL);
+	PRINT_MIS_byte(asd_ha, FREE_SCB_MASK);
+	PRINT_MIS_word(asd_ha, BUILTIN_FREE_SCB_HEAD);
+	PRINT_MIS_word(asd_ha, BUILTIN_FREE_SCB_TAIL);
+	PRINT_MIS_word(asd_ha, EXTENDED_FREE_SCB_HEAD);
+	PRINT_MIS_word(asd_ha, EXTENDED_FREE_SCB_TAIL);
+
+	asd_printk("MIP 7 >>>>\n");
+	PRINT_MIS_qword(asd_ha, EMPTY_REQ_QUEUE);
+	PRINT_MIS_qword(asd_ha, EMPTY_REQ_COUNT);
+	PRINT_MIS_word(asd_ha, Q_EMPTY_HEAD);
+	PRINT_MIS_word(asd_ha, Q_EMPTY_TAIL);
+	PRINT_MIS_word(asd_ha, NEED_EMPTY_SCB);
+	PRINT_MIS_byte(asd_ha, EMPTY_REQ_HEAD);
+	PRINT_MIS_byte(asd_ha, EMPTY_REQ_TAIL);
+	PRINT_MIS_byte(asd_ha, EMPTY_SCB_OFFSET);
+	PRINT_MIS_word(asd_ha, PRIMITIVE_DATA);
+	PRINT_MIS_dword(asd_ha, TIMEOUT_CONST);
+
+	asd_printk("MDP 0 >>>>\n");
+	asd_printk("%-20s %6s %6s %6s %6s %6s %6s %6s %6s\n",
+		   "Mode: ", "0", "1", "2", "3", "4", "5", "6", "7");
+	PRINT_CMDP_word(asd_ha, LRM_SAVE_SINDEX);
+	PRINT_CMDP_word(asd_ha, LRM_SAVE_SCBPTR);
+	PRINT_CMDP_word(asd_ha, Q_LINK_HEAD);
+	PRINT_CMDP_word(asd_ha, Q_LINK_TAIL);
+	PRINT_CMDP_byte(asd_ha, LRM_SAVE_SCRPAGE);
+
+	asd_printk("MDP 0 Mode 8 >>>>\n");
+	PRINT_MIS_word(asd_ha, RET_ADDR);
+	PRINT_MIS_word(asd_ha, RET_SCBPTR);
+	PRINT_MIS_word(asd_ha, SAVE_SCBPTR);
+	PRINT_MIS_word(asd_ha, EMPTY_TRANS_CTX);
+	PRINT_MIS_word(asd_ha, RESP_LEN);
+	PRINT_MIS_word(asd_ha, TMF_SCBPTR);
+	PRINT_MIS_word(asd_ha, GLOBAL_PREV_SCB);
+	PRINT_MIS_word(asd_ha, GLOBAL_HEAD);
+	PRINT_MIS_word(asd_ha, CLEAR_LU_HEAD);
+	PRINT_MIS_byte(asd_ha, TMF_OPCODE);
+	PRINT_MIS_byte(asd_ha, SCRATCH_FLAGS);
+	PRINT_MIS_word(asd_ha, HSB_SITE);
+	PRINT_MIS_word(asd_ha, FIRST_INV_SCB_SITE);
+	PRINT_MIS_word(asd_ha, FIRST_INV_DDB_SITE);
+
+	asd_printk("MDP 1 Mode 8 >>>>\n");
+	PRINT_MIS_qword(asd_ha, LUN_TO_CLEAR);
+	PRINT_MIS_qword(asd_ha, LUN_TO_CHECK);
+
+	asd_printk("MDP 2 Mode 8 >>>>\n");
+	PRINT_MIS_qword(asd_ha, HQ_NEW_POINTER);
+	PRINT_MIS_qword(asd_ha, HQ_DONE_BASE);
+	PRINT_MIS_dword(asd_ha, HQ_DONE_POINTER);
+	PRINT_MIS_byte(asd_ha, HQ_DONE_PASS);
+}
+
+#define PRINT_LREG_8bit(_h, _lseq, _n) \
+        asd_printk(STR_8BIT, #_n, _n, asd_read_reg_byte(_h, Lm##_n(_lseq)))
+#define PRINT_LREG_16bit(_h, _lseq, _n) \
+        asd_printk(STR_16BIT, #_n, _n, asd_read_reg_word(_h, Lm##_n(_lseq)))
+#define PRINT_LREG_32bit(_h, _lseq, _n) \
+        asd_printk(STR_32BIT, #_n, _n, asd_read_reg_dword(_h, Lm##_n(_lseq)))
+
+#define PRINT_LMIP_byte(_h, _lseq, _n)                              \
+	asd_printk(STR_8BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+		   asd_read_reg_byte(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_word(_h, _lseq, _n)                              \
+	asd_printk(STR_16BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+		   asd_read_reg_word(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_dword(_h, _lseq, _n)                             \
+	asd_printk(STR_32BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+		   asd_read_reg_dword(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_qword(_h, _lseq, _n)                                \
+	asd_printk(STR_64BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+		 (unsigned long long)(((unsigned long long) \
+		 asd_read_reg_dword(_h, LmSEQ_##_n(_lseq))) \
+	          | (((unsigned long long) \
+		 asd_read_reg_dword(_h, LmSEQ_##_n(_lseq)+4))<<32)))
+
+static void asd_print_lseq_cio_reg(struct asd_ha_struct *asd_ha,
+				   u32 lseq_cio_addr, int i)
+{
+	switch (LSEQmCIOREGS[i].width) {
+	case 8:
+		asd_printk("%20s[0x%x]: 0x%02x\n", LSEQmCIOREGS[i].name,
+			   LSEQmCIOREGS[i].offs,
+			   asd_read_reg_byte(asd_ha, lseq_cio_addr +
+					     LSEQmCIOREGS[i].offs));
+
+		break;
+	case 16:
+		asd_printk("%20s[0x%x]: 0x%04x\n", LSEQmCIOREGS[i].name,
+			   LSEQmCIOREGS[i].offs,
+			   asd_read_reg_word(asd_ha, lseq_cio_addr +
+					     LSEQmCIOREGS[i].offs));
+
+		break;
+	case 32:
+		asd_printk("%20s[0x%x]: 0x%08x\n", LSEQmCIOREGS[i].name,
+			   LSEQmCIOREGS[i].offs,
+			   asd_read_reg_dword(asd_ha, lseq_cio_addr +
+					      LSEQmCIOREGS[i].offs));
+		break;
+	}
+}
+
+static void asd_dump_lseq_state(struct asd_ha_struct *asd_ha, int lseq)
+{
+	u32 moffs;
+	int mode;
+
+	asd_printk("LSEQ %d STATE\n", lseq);
+
+	asd_printk("LSEQ%d: ARP2 REGISTERS\n", lseq);
+	PRINT_LREG_32bit(asd_ha, lseq, ARP2CTL);
+	PRINT_LREG_32bit(asd_ha, lseq, ARP2INT);
+	PRINT_LREG_32bit(asd_ha, lseq, ARP2INTEN);
+	PRINT_LREG_8bit(asd_ha, lseq, MODEPTR);
+	PRINT_LREG_8bit(asd_ha, lseq, ALTMODE);
+	PRINT_LREG_8bit(asd_ha, lseq, FLAG);
+	PRINT_LREG_8bit(asd_ha, lseq, ARP2INTCTL);
+	PRINT_LREG_16bit(asd_ha, lseq, STACK);
+	PRINT_LREG_16bit(asd_ha, lseq, PRGMCNT);
+	PRINT_LREG_16bit(asd_ha, lseq, ACCUM);
+	PRINT_LREG_16bit(asd_ha, lseq, SINDEX);
+	PRINT_LREG_16bit(asd_ha, lseq, DINDEX);
+	PRINT_LREG_8bit(asd_ha, lseq, SINDIR);
+	PRINT_LREG_8bit(asd_ha, lseq, DINDIR);
+	PRINT_LREG_8bit(asd_ha, lseq, JUMLDIR);
+	PRINT_LREG_8bit(asd_ha, lseq, ARP2HALTCODE);
+	PRINT_LREG_16bit(asd_ha, lseq, CURRADDR);
+	PRINT_LREG_16bit(asd_ha, lseq, LASTADDR);
+	PRINT_LREG_16bit(asd_ha, lseq, NXTLADDR);
+
+	asd_printk("LSEQ%d: IOP REGISTERS\n", lseq);
+
+	PRINT_LREG_32bit(asd_ha, lseq, MODECTL);
+	PRINT_LREG_32bit(asd_ha, lseq, DBGMODE);
+	PRINT_LREG_32bit(asd_ha, lseq, CONTROL);
+	PRINT_REG_32bit(asd_ha, BISTCTL0, LmBISTCTL0(lseq));
+	PRINT_REG_32bit(asd_ha, BISTCTL1, LmBISTCTL1(lseq));
+
+	asd_printk("LSEQ%d: CIO REGISTERS\n", lseq);
+	asd_printk("Mode common:\n");
+
+	for (mode = 0; mode < 8; mode++) {
+		u32 lseq_cio_addr = LmSEQ_PHY_BASE(mode, lseq);
+		int i;
+
+		for (i = 0; LSEQmCIOREGS[i].name; i++)
+			if (LSEQmCIOREGS[i].mode == MODE_COMMON)
+				asd_print_lseq_cio_reg(asd_ha,lseq_cio_addr,i);
+	}
+
+	asd_printk("Mode unique:\n");
+	for (mode = 0; mode < 8; mode++) {
+		u32 lseq_cio_addr = LmSEQ_PHY_BASE(mode, lseq);
+		int i;
+
+		asd_printk("Mode %d\n", mode);
+		for  (i = 0; LSEQmCIOREGS[i].name; i++) {
+			if (!(LSEQmCIOREGS[i].mode & (1 << mode)))
+				continue;
+			asd_print_lseq_cio_reg(asd_ha, lseq_cio_addr, i);
+		}
+	}
+
+	asd_printk("SCRATCH MEMORY\n");
+
+	asd_printk("LSEQ%d MIP 0 >>>>\n", lseq);
+	PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_HEAD);
+	PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_TAIL);
+	PRINT_LMIP_byte(asd_ha, lseq, LINK_NUMBER);
+	PRINT_LMIP_byte(asd_ha, lseq, SCRATCH_FLAGS);
+	PRINT_LMIP_qword(asd_ha, lseq, CONNECTION_STATE);
+	PRINT_LMIP_word(asd_ha, lseq, CONCTL);
+	PRINT_LMIP_byte(asd_ha, lseq, CONSTAT);
+	PRINT_LMIP_byte(asd_ha, lseq, CONNECTION_MODES);
+	PRINT_LMIP_word(asd_ha, lseq, REG1_ISR);
+	PRINT_LMIP_word(asd_ha, lseq, REG2_ISR);
+	PRINT_LMIP_word(asd_ha, lseq, REG3_ISR);
+	PRINT_LMIP_qword(asd_ha, lseq,REG0_ISR);
+
+	asd_printk("LSEQ%d MIP 1 >>>>\n", lseq);
+	PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR0);
+	PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR1);
+	PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR2);
+	PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR3);
+	PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE0);
+	PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE1);
+	PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE2);
+	PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE3);
+	PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_HEAD);
+	PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_TAIL);
+	PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_BUF_AVAIL);
+	PRINT_LMIP_dword(asd_ha, lseq, TIMEOUT_CONST);
+	PRINT_LMIP_word(asd_ha, lseq, ISR_SAVE_SINDEX);
+	PRINT_LMIP_word(asd_ha, lseq, ISR_SAVE_DINDEX);
+
+	asd_printk("LSEQ%d MIP 2 >>>>\n", lseq);
+	PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR0);
+	PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR1);
+	PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR2);
+	PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR3);
+	PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD0);
+	PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD1);
+	PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD2);
+	PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD3);
+	PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_HEAD);
+	PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_TAIL);
+	PRINT_LMIP_byte(asd_ha, lseq, EMPTY_BUFS_AVAIL);
+
+	asd_printk("LSEQ%d MIP 3 >>>>\n", lseq);
+	PRINT_LMIP_dword(asd_ha, lseq, DEV_PRES_TMR_TOUT_CONST);
+	PRINT_LMIP_dword(asd_ha, lseq, SATA_INTERLOCK_TIMEOUT);
+	PRINT_LMIP_dword(asd_ha, lseq, SRST_ASSERT_TIMEOUT);
+	PRINT_LMIP_dword(asd_ha, lseq, RCV_FIS_TIMEOUT);
+	PRINT_LMIP_dword(asd_ha, lseq, ONE_MILLISEC_TIMEOUT);
+	PRINT_LMIP_dword(asd_ha, lseq, TEN_MS_COMINIT_TIMEOUT);
+	PRINT_LMIP_dword(asd_ha, lseq, SMP_RCV_TIMEOUT);
+
+	for (mode = 0; mode < 3; mode++) {
+		asd_printk("LSEQ%d MDP 0 MODE %d >>>>\n", lseq, mode);
+		moffs = mode * LSEQ_MODE_SCRATCH_SIZE;
+
+		asd_printk(STR_16BIT, "RET_ADDR", 0,
+			   asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)
+					     + moffs));
+		asd_printk(STR_16BIT, "REG0_MODE", 2,
+			   asd_read_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)
+					     + moffs));
+		asd_printk(STR_16BIT, "MODE_FLAGS", 4,
+			   asd_read_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)
+					     + moffs));
+		asd_printk(STR_16BIT, "RET_ADDR2", 0x6,
+			   asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)
+					     + moffs));
+		asd_printk(STR_16BIT, "RET_ADDR1", 0x8,
+			   asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)
+					     + moffs));
+		asd_printk(STR_8BIT, "OPCODE_TO_CSEQ", 0xB,
+			   asd_read_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)
+					     + moffs));
+		asd_printk(STR_16BIT, "DATA_TO_CSEQ", 0xC,
+			   asd_read_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)
+					     + moffs));
+	}
+
+	asd_printk("LSEQ%d MDP 0 MODE 5 >>>>\n", lseq);
+	moffs = LSEQ_MODE5_PAGE0_OFFSET;
+	asd_printk(STR_16BIT, "RET_ADDR", 0,
+		   asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq) + moffs));
+	asd_printk(STR_16BIT, "REG0_MODE", 2,
+		   asd_read_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq) + moffs));
+	asd_printk(STR_16BIT, "MODE_FLAGS", 4,
+		   asd_read_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq) + moffs));
+	asd_printk(STR_16BIT, "RET_ADDR2", 0x6,
+		   asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq) + moffs));
+	asd_printk(STR_16BIT, "RET_ADDR1", 0x8,
+		   asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq) + moffs));
+	asd_printk(STR_8BIT, "OPCODE_TO_CSEQ", 0xB,
+	   asd_read_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq) + moffs));
+	asd_printk(STR_16BIT, "DATA_TO_CSEQ", 0xC,
+	   asd_read_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq) + moffs));
+
+	asd_printk("LSEQ%d MDP 0 MODE 0 >>>>\n", lseq);
+	PRINT_LMIP_word(asd_ha, lseq, FIRST_INV_DDB_SITE);
+	PRINT_LMIP_word(asd_ha, lseq, EMPTY_TRANS_CTX);
+	PRINT_LMIP_word(asd_ha, lseq, RESP_LEN);
+	PRINT_LMIP_word(asd_ha, lseq, FIRST_INV_SCB_SITE);
+	PRINT_LMIP_dword(asd_ha, lseq, INTEN_SAVE);
+	PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_FRM_LEN);
+	PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_PROTOCOL);
+	PRINT_LMIP_byte(asd_ha, lseq, RESP_STATUS);
+	PRINT_LMIP_byte(asd_ha, lseq, LAST_LOADED_SGE);
+	PRINT_LMIP_byte(asd_ha, lseq, SAVE_SCBPTR);
+
+	asd_printk("LSEQ%d MDP 0 MODE 1 >>>>\n", lseq);
+	PRINT_LMIP_word(asd_ha, lseq, Q_XMIT_HEAD);
+	PRINT_LMIP_word(asd_ha, lseq, M1_EMPTY_TRANS_CTX);
+	PRINT_LMIP_word(asd_ha, lseq, INI_CONN_TAG);
+	PRINT_LMIP_byte(asd_ha, lseq, FAILED_OPEN_STATUS);
+	PRINT_LMIP_byte(asd_ha, lseq, XMIT_REQUEST_TYPE);
+	PRINT_LMIP_byte(asd_ha, lseq, M1_RESP_STATUS);
+	PRINT_LMIP_byte(asd_ha, lseq, M1_LAST_LOADED_SGE);
+	PRINT_LMIP_word(asd_ha, lseq, M1_SAVE_SCBPTR);
+
+	asd_printk("LSEQ%d MDP 0 MODE 2 >>>>\n", lseq);
+	PRINT_LMIP_word(asd_ha, lseq, PORT_COUNTER);
+	PRINT_LMIP_word(asd_ha, lseq, PM_TABLE_PTR);
+	PRINT_LMIP_word(asd_ha, lseq, SATA_INTERLOCK_TMR_SAVE);
+	PRINT_LMIP_word(asd_ha, lseq, IP_BITL);
+	PRINT_LMIP_word(asd_ha, lseq, COPY_SMP_CONN_TAG);
+	PRINT_LMIP_byte(asd_ha, lseq, P0M2_OFFS1AH);
+
+	asd_printk("LSEQ%d MDP 0 MODE 4/5 >>>>\n", lseq);
+	PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_STATUS);
+	PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_MODE);
+	PRINT_LMIP_word(asd_ha, lseq, Q_LINK_HEAD);
+	PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_ERR);
+	PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_SIGNALS);
+	PRINT_LMIP_byte(asd_ha, lseq, SAS_RESET_MODE);
+	PRINT_LMIP_byte(asd_ha, lseq, LINK_RESET_RETRY_COUNT);
+	PRINT_LMIP_byte(asd_ha, lseq, NUM_LINK_RESET_RETRIES);
+	PRINT_LMIP_word(asd_ha, lseq, OOB_INT_ENABLES);
+	PRINT_LMIP_word(asd_ha, lseq, NOTIFY_TIMER_TIMEOUT);
+	PRINT_LMIP_word(asd_ha, lseq, NOTIFY_TIMER_DOWN_COUNT);
+
+	asd_printk("LSEQ%d MDP 1 MODE 0 >>>>\n", lseq);
+	PRINT_LMIP_qword(asd_ha, lseq, SG_LIST_PTR_ADDR0);
+	PRINT_LMIP_qword(asd_ha, lseq, SG_LIST_PTR_ADDR1);
+
+	asd_printk("LSEQ%d MDP 1 MODE 1 >>>>\n", lseq);
+	PRINT_LMIP_qword(asd_ha, lseq, M1_SG_LIST_PTR_ADDR0);
+	PRINT_LMIP_qword(asd_ha, lseq, M1_SG_LIST_PTR_ADDR1);
+
+	asd_printk("LSEQ%d MDP 1 MODE 2 >>>>\n", lseq);
+	PRINT_LMIP_dword(asd_ha, lseq, INVALID_DWORD_COUNT);
+	PRINT_LMIP_dword(asd_ha, lseq, DISPARITY_ERROR_COUNT);
+	PRINT_LMIP_dword(asd_ha, lseq, LOSS_OF_SYNC_COUNT);
+
+	asd_printk("LSEQ%d MDP 1 MODE 4/5 >>>>\n", lseq);
+	PRINT_LMIP_dword(asd_ha, lseq, FRAME_TYPE_MASK);
+	PRINT_LMIP_dword(asd_ha, lseq, HASHED_SRC_ADDR_MASK_PRINT);
+	PRINT_LMIP_byte(asd_ha, lseq, NUM_FILL_BYTES_MASK);
+	PRINT_LMIP_word(asd_ha, lseq, TAG_MASK);
+	PRINT_LMIP_word(asd_ha, lseq, TARGET_PORT_XFER_TAG);
+	PRINT_LMIP_dword(asd_ha, lseq, DATA_OFFSET);
+
+	asd_printk("LSEQ%d MDP 2 MODE 0 >>>>\n", lseq);
+	PRINT_LMIP_dword(asd_ha, lseq, SMP_RCV_TIMER_TERM_TS);
+	PRINT_LMIP_byte(asd_ha, lseq, DEVICE_BITS);
+	PRINT_LMIP_word(asd_ha, lseq, SDB_DDB);
+	PRINT_LMIP_word(asd_ha, lseq, SDB_NUM_TAGS);
+	PRINT_LMIP_word(asd_ha, lseq, SDB_CURR_TAG);
+
+	asd_printk("LSEQ%d MDP 2 MODE 1 >>>>\n", lseq);
+	PRINT_LMIP_qword(asd_ha, lseq, TX_ID_ADDR_FRAME);
+	PRINT_LMIP_dword(asd_ha, lseq, OPEN_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, SRST_AS_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, LAST_LOADED_SG_EL);
+
+	asd_printk("LSEQ%d MDP 2 MODE 2 >>>>\n", lseq);
+	PRINT_LMIP_dword(asd_ha, lseq, CLOSE_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, BREAK_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, DWS_RESET_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, SATA_INTERLOCK_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, MCTL_TIMER_TERM_TS);
+
+	asd_printk("LSEQ%d MDP 2 MODE 4/5 >>>>\n", lseq);
+	PRINT_LMIP_dword(asd_ha, lseq, COMINIT_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, RCV_ID_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, RCV_FIS_TIMER_TERM_TS);
+	PRINT_LMIP_dword(asd_ha, lseq, DEV_PRES_TIMER_TERM_TS);
+}
+
+/**
+ * asd_dump_ddb_site -- dump a CSEQ DDB site
+ * @asd_ha: pointer to host adapter structure
+ * @site_no: site number of interest
+ */
+void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, u16 site_no)
+{
+	if (site_no >= asd_ha->hw_prof.max_ddbs)
+		return;
+
+#define DDB_FIELDB(__name)                                        \
+	asd_ddbsite_read_byte(asd_ha, site_no,                    \
+			      offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+#define DDB2_FIELDB(__name)                                       \
+	asd_ddbsite_read_byte(asd_ha, site_no,                    \
+			      offsetof(struct asd_ddb_stp_sata_target_port, __name))
+#define DDB_FIELDW(__name)                                        \
+	asd_ddbsite_read_word(asd_ha, site_no,                    \
+			      offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+
+#define DDB_FIELDD(__name)                                         \
+	asd_ddbsite_read_dword(asd_ha, site_no,                    \
+			       offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+
+	asd_printk("DDB: 0x%02x\n", site_no);
+	asd_printk("conn_type: 0x%02x\n", DDB_FIELDB(conn_type));
+	asd_printk("conn_rate: 0x%02x\n", DDB_FIELDB(conn_rate));
+	asd_printk("init_conn_tag: 0x%04x\n", be16_to_cpu(DDB_FIELDW(init_conn_tag)));
+	asd_printk("send_queue_head: 0x%04x\n", be16_to_cpu(DDB_FIELDW(send_queue_head)));
+	asd_printk("sq_suspended: 0x%02x\n", DDB_FIELDB(sq_suspended));
+	asd_printk("DDB Type: 0x%02x\n", DDB_FIELDB(ddb_type));
+	asd_printk("AWT Default: 0x%04x\n", DDB_FIELDW(awt_def));
+	asd_printk("compat_features: 0x%02x\n", DDB_FIELDB(compat_features));
+	asd_printk("Pathway Blocked Count: 0x%02x\n",
+		   DDB_FIELDB(pathway_blocked_count));
+	asd_printk("arb_wait_time: 0x%04x\n", DDB_FIELDW(arb_wait_time));
+	asd_printk("more_compat_features: 0x%08x\n",
+		   DDB_FIELDD(more_compat_features));
+	asd_printk("Conn Mask: 0x%02x\n", DDB_FIELDB(conn_mask));
+	asd_printk("flags: 0x%02x\n", DDB_FIELDB(flags));
+	asd_printk("flags2: 0x%02x\n", DDB2_FIELDB(flags2));
+	asd_printk("ExecQ Tail: 0x%04x\n",DDB_FIELDW(exec_queue_tail));
+	asd_printk("SendQ Tail: 0x%04x\n",DDB_FIELDW(send_queue_tail));
+	asd_printk("Active Task Count: 0x%04x\n",
+		   DDB_FIELDW(active_task_count));
+	asd_printk("ITNL Reason: 0x%02x\n", DDB_FIELDB(itnl_reason));
+	asd_printk("ITNL Timeout Const: 0x%04x\n", DDB_FIELDW(itnl_timeout));
+	asd_printk("ITNL timestamp: 0x%08x\n", DDB_FIELDD(itnl_timestamp));
+}
+
+void asd_dump_ddb_0(struct asd_ha_struct *asd_ha)
+{
+#define DDB0_FIELDB(__name)                                  \
+	asd_ddbsite_read_byte(asd_ha, 0,                     \
+			      offsetof(struct asd_ddb_seq_shared, __name))
+#define DDB0_FIELDW(__name)                                  \
+	asd_ddbsite_read_word(asd_ha, 0,                     \
+			      offsetof(struct asd_ddb_seq_shared, __name))
+
+#define DDB0_FIELDD(__name)                                  \
+	asd_ddbsite_read_dword(asd_ha,0 ,                    \
+			       offsetof(struct asd_ddb_seq_shared, __name))
+
+#define DDB0_FIELDA(__name, _o)                              \
+	asd_ddbsite_read_byte(asd_ha, 0,                     \
+			      offsetof(struct asd_ddb_seq_shared, __name)+_o)
+
+
+	asd_printk("DDB: 0\n");
+	asd_printk("q_free_ddb_head:%04x\n", DDB0_FIELDW(q_free_ddb_head));
+	asd_printk("q_free_ddb_tail:%04x\n", DDB0_FIELDW(q_free_ddb_tail));
+	asd_printk("q_free_ddb_cnt:%04x\n",  DDB0_FIELDW(q_free_ddb_cnt));
+	asd_printk("q_used_ddb_head:%04x\n", DDB0_FIELDW(q_used_ddb_head));
+	asd_printk("q_used_ddb_tail:%04x\n", DDB0_FIELDW(q_used_ddb_tail));
+	asd_printk("shared_mem_lock:%04x\n", DDB0_FIELDW(shared_mem_lock));
+	asd_printk("smp_conn_tag:%04x\n",    DDB0_FIELDW(smp_conn_tag));
+	asd_printk("est_nexus_buf_cnt:%04x\n", DDB0_FIELDW(est_nexus_buf_cnt));
+	asd_printk("est_nexus_buf_thresh:%04x\n",
+		   DDB0_FIELDW(est_nexus_buf_thresh));
+	asd_printk("conn_not_active:%02x\n", DDB0_FIELDB(conn_not_active));
+	asd_printk("phy_is_up:%02x\n",       DDB0_FIELDB(phy_is_up));
+	asd_printk("port_map_by_links:%02x %02x %02x %02x "
+		   "%02x %02x %02x %02x\n",
+		   DDB0_FIELDA(port_map_by_links, 0),
+		   DDB0_FIELDA(port_map_by_links, 1),
+		   DDB0_FIELDA(port_map_by_links, 2),
+		   DDB0_FIELDA(port_map_by_links, 3),
+		   DDB0_FIELDA(port_map_by_links, 4),
+		   DDB0_FIELDA(port_map_by_links, 5),
+		   DDB0_FIELDA(port_map_by_links, 6),
+		   DDB0_FIELDA(port_map_by_links, 7));
+}
+
+static void asd_dump_scb_site(struct asd_ha_struct *asd_ha, u16 site_no)
+{
+
+#define SCB_FIELDB(__name)                                                 \
+	asd_scbsite_read_byte(asd_ha, site_no, sizeof(struct scb_header)   \
+			      + offsetof(struct initiate_ssp_task, __name))
+#define SCB_FIELDW(__name)                                                 \
+	asd_scbsite_read_word(asd_ha, site_no, sizeof(struct scb_header)   \
+			      + offsetof(struct initiate_ssp_task, __name))
+#define SCB_FIELDD(__name)                                                 \
+	asd_scbsite_read_dword(asd_ha, site_no, sizeof(struct scb_header)  \
+			       + offsetof(struct initiate_ssp_task, __name))
+
+	asd_printk("Total Xfer Len: 0x%08x.\n", SCB_FIELDD(total_xfer_len));
+	asd_printk("Frame Type: 0x%02x.\n", SCB_FIELDB(ssp_frame.frame_type));
+	asd_printk("Tag: 0x%04x.\n", SCB_FIELDW(ssp_frame.tag));
+	asd_printk("Target Port Xfer Tag: 0x%04x.\n",
+		   SCB_FIELDW(ssp_frame.tptt));
+	asd_printk("Data Offset: 0x%08x.\n", SCB_FIELDW(ssp_frame.data_offs));
+	asd_printk("Retry Count: 0x%02x.\n", SCB_FIELDB(retry_count));
+}
+
+/**
+ * asd_dump_scb_sites -- dump currently used CSEQ SCB sites
+ * @asd_ha: pointer to host adapter struct
+ */
+void asd_dump_scb_sites(struct asd_ha_struct *asd_ha)
+{
+	u16	site_no;
+
+	for (site_no = 0; site_no < asd_ha->hw_prof.max_scbs; site_no++) {
+		u8 opcode;
+
+		if (!SCB_SITE_VALID(site_no))
+			continue;
+
+		/* We are only interested in SCB sites currently used.
+		 */
+		opcode = asd_scbsite_read_byte(asd_ha, site_no,
+					       offsetof(struct scb_header,
+							opcode));
+		if (opcode == 0xFF)
+			continue;
+
+		asd_printk("\nSCB: 0x%x\n", site_no);
+		asd_dump_scb_site(asd_ha, site_no);
+	}
+}
+
+/**
+ * ads_dump_seq_state -- dump CSEQ and LSEQ states
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of LSEQs of interest
+ */
+void asd_dump_seq_state(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+	int lseq;
+
+	asd_dump_cseq_state(asd_ha);
+
+	if (lseq_mask != 0)
+		for_each_sequencer(lseq_mask, lseq_mask, lseq)
+			asd_dump_lseq_state(asd_ha, lseq);
+}
+
+void asd_dump_frame_rcvd(struct asd_phy *phy,
+			 struct done_list_struct *dl)
+{
+	unsigned long flags;
+	int i;
+
+	switch ((dl->status_block[1] & 0x70) >> 3) {
+	case SAS_PROTO_STP:
+		ASD_DPRINTK("STP proto device-to-host FIS:\n");
+		break;
+	default:
+	case SAS_PROTO_SSP:
+		ASD_DPRINTK("SAS proto IDENTIFY:\n");
+		break;
+	}
+	spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+	for (i = 0; i < phy->sas_phy.frame_rcvd_size; i+=4)
+		ASD_DPRINTK("%02x: %02x %02x %02x %02x\n",
+			    i,
+			    phy->frame_rcvd[i],
+			    phy->frame_rcvd[i+1],
+			    phy->frame_rcvd[i+2],
+			    phy->frame_rcvd[i+3]);
+	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+}
+
+static inline void asd_dump_scb(struct asd_ascb *ascb, int ind)
+{
+	asd_printk("scb%d: vaddr: 0x%p, dma_handle: 0x%llx, next: 0x%llx, "
+		   "index:%d, opcode:0x%02x\n",
+		   ind, ascb->dma_scb.vaddr,
+		   (unsigned long long)ascb->dma_scb.dma_handle,
+		   (unsigned long long)
+		   le64_to_cpu(ascb->scb->header.next_scb),
+		   le16_to_cpu(ascb->scb->header.index),
+		   ascb->scb->header.opcode);
+}
+
+void asd_dump_scb_list(struct asd_ascb *ascb, int num)
+{
+	int i = 0;
+
+	asd_printk("dumping %d scbs:\n", num);
+
+	asd_dump_scb(ascb, i++);
+	--num;
+
+	if (num > 0 && !list_empty(&ascb->list)) {
+		struct list_head *el;
+
+		list_for_each(el, &ascb->list) {
+			struct asd_ascb *s = list_entry(el, struct asd_ascb,
+							list);
+			asd_dump_scb(s, i++);
+			if (--num <= 0)
+				break;
+		}
+	}
+}
+
+#endif /* ASD_DEBUG */
diff --git a/drivers/scsi/aic94xx/aic94xx_dump.h b/drivers/scsi/aic94xx/aic94xx_dump.h
new file mode 100644
index 000000000000..0c388e7da6bb
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_dump.h
@@ -0,0 +1,52 @@
+/*
+ * Aic94xx SAS/SATA driver dump header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef _AIC94XX_DUMP_H_
+#define _AIC94XX_DUMP_H_
+
+#ifdef ASD_DEBUG
+
+void asd_dump_ddb_0(struct asd_ha_struct *asd_ha);
+void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, u16 site_no);
+void asd_dump_scb_sites(struct asd_ha_struct *asd_ha);
+void asd_dump_seq_state(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+void asd_dump_frame_rcvd(struct asd_phy *phy,
+			 struct done_list_struct *dl);
+void asd_dump_scb_list(struct asd_ascb *ascb, int num);
+#else /* ASD_DEBUG */
+
+static inline void asd_dump_ddb_0(struct asd_ha_struct *asd_ha) { }
+static inline void asd_dump_target_ddb(struct asd_ha_struct *asd_ha,
+				     u16 site_no) { }
+static inline void asd_dump_scb_sites(struct asd_ha_struct *asd_ha) { }
+static inline void asd_dump_seq_state(struct asd_ha_struct *asd_ha,
+				      u8 lseq_mask) { }
+static inline void asd_dump_frame_rcvd(struct asd_phy *phy,
+				       struct done_list_struct *dl) { }
+static inline void asd_dump_scb_list(struct asd_ascb *ascb, int num) { }
+#endif /* ASD_DEBUG */
+
+#endif /* _AIC94XX_DUMP_H_ */
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
new file mode 100644
index 000000000000..075cea85b56b
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -0,0 +1,1376 @@
+/*
+ * Aic94xx SAS/SATA driver hardware interface.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+#include "aic94xx_dump.h"
+
+u32 MBAR0_SWB_SIZE;
+
+/* ---------- Initialization ---------- */
+
+static void asd_get_user_sas_addr(struct asd_ha_struct *asd_ha)
+{
+	extern char sas_addr_str[];
+	/* If the user has specified a WWN it overrides other settings
+	 */
+	if (sas_addr_str[0] != '\0')
+		asd_destringify_sas_addr(asd_ha->hw_prof.sas_addr,
+					 sas_addr_str);
+	else if (asd_ha->hw_prof.sas_addr[0] != 0)
+		asd_stringify_sas_addr(sas_addr_str, asd_ha->hw_prof.sas_addr);
+}
+
+static void asd_propagate_sas_addr(struct asd_ha_struct *asd_ha)
+{
+	int i;
+
+	for (i = 0; i < ASD_MAX_PHYS; i++) {
+		if (asd_ha->hw_prof.phy_desc[i].sas_addr[0] == 0)
+			continue;
+		/* Set a phy's address only if it has none.
+		 */
+		ASD_DPRINTK("setting phy%d addr to %llx\n", i,
+			    SAS_ADDR(asd_ha->hw_prof.sas_addr));
+		memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr,
+		       asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE);
+	}
+}
+
+/* ---------- PHY initialization ---------- */
+
+static void asd_init_phy_identify(struct asd_phy *phy)
+{
+	phy->identify_frame = phy->id_frm_tok->vaddr;
+
+	memset(phy->identify_frame, 0, sizeof(*phy->identify_frame));
+
+	phy->identify_frame->dev_type = SAS_END_DEV;
+	if (phy->sas_phy.role & PHY_ROLE_INITIATOR)
+		phy->identify_frame->initiator_bits = phy->sas_phy.iproto;
+	if (phy->sas_phy.role & PHY_ROLE_TARGET)
+		phy->identify_frame->target_bits = phy->sas_phy.tproto;
+	memcpy(phy->identify_frame->sas_addr, phy->phy_desc->sas_addr,
+	       SAS_ADDR_SIZE);
+	phy->identify_frame->phy_id = phy->sas_phy.id;
+}
+
+static int asd_init_phy(struct asd_phy *phy)
+{
+	struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	sas_phy->enabled = 1;
+	sas_phy->class = SAS;
+	sas_phy->iproto = SAS_PROTO_ALL;
+	sas_phy->tproto = 0;
+	sas_phy->type = PHY_TYPE_PHYSICAL;
+	sas_phy->role = PHY_ROLE_INITIATOR;
+	sas_phy->oob_mode = OOB_NOT_CONNECTED;
+	sas_phy->linkrate = PHY_LINKRATE_NONE;
+
+	phy->id_frm_tok = asd_alloc_coherent(asd_ha,
+					     sizeof(*phy->identify_frame),
+					     GFP_KERNEL);
+	if (!phy->id_frm_tok) {
+		asd_printk("no mem for IDENTIFY for phy%d\n", sas_phy->id);
+		return -ENOMEM;
+	} else
+		asd_init_phy_identify(phy);
+
+	memset(phy->frame_rcvd, 0, sizeof(phy->frame_rcvd));
+
+	return 0;
+}
+
+static int asd_init_phys(struct asd_ha_struct *asd_ha)
+{
+	u8 i;
+	u8 phy_mask = asd_ha->hw_prof.enabled_phys;
+
+	for (i = 0; i < ASD_MAX_PHYS; i++) {
+		struct asd_phy *phy = &asd_ha->phys[i];
+
+		phy->phy_desc = &asd_ha->hw_prof.phy_desc[i];
+
+		phy->sas_phy.enabled = 0;
+		phy->sas_phy.id = i;
+		phy->sas_phy.sas_addr = &phy->phy_desc->sas_addr[0];
+		phy->sas_phy.frame_rcvd = &phy->frame_rcvd[0];
+		phy->sas_phy.ha = &asd_ha->sas_ha;
+		phy->sas_phy.lldd_phy = phy;
+	}
+
+	/* Now enable and initialize only the enabled phys. */
+	for_each_phy(phy_mask, phy_mask, i) {
+		int err = asd_init_phy(&asd_ha->phys[i]);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/* ---------- Sliding windows ---------- */
+
+static int asd_init_sw(struct asd_ha_struct *asd_ha)
+{
+	struct pci_dev *pcidev = asd_ha->pcidev;
+	int err;
+	u32 v;
+
+	/* Unlock MBARs */
+	err = pci_read_config_dword(pcidev, PCI_CONF_MBAR_KEY, &v);
+	if (err) {
+		asd_printk("couldn't access conf. space of %s\n",
+			   pci_name(pcidev));
+		goto Err;
+	}
+	if (v)
+		err = pci_write_config_dword(pcidev, PCI_CONF_MBAR_KEY, v);
+	if (err) {
+		asd_printk("couldn't write to MBAR_KEY of %s\n",
+			   pci_name(pcidev));
+		goto Err;
+	}
+
+	/* Set sliding windows A, B and C to point to proper internal
+	 * memory regions.
+	 */
+	pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWA, REG_BASE_ADDR);
+	pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWB,
+			       REG_BASE_ADDR_CSEQCIO);
+	pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWC, REG_BASE_ADDR_EXSI);
+	asd_ha->io_handle[0].swa_base = REG_BASE_ADDR;
+	asd_ha->io_handle[0].swb_base = REG_BASE_ADDR_CSEQCIO;
+	asd_ha->io_handle[0].swc_base = REG_BASE_ADDR_EXSI;
+	MBAR0_SWB_SIZE = asd_ha->io_handle[0].len - 0x80;
+	if (!asd_ha->iospace) {
+		/* MBAR1 will point to OCM (On Chip Memory) */
+		pci_write_config_dword(pcidev, PCI_CONF_MBAR1, OCM_BASE_ADDR);
+		asd_ha->io_handle[1].swa_base = OCM_BASE_ADDR;
+	}
+	spin_lock_init(&asd_ha->iolock);
+Err:
+	return err;
+}
+
+/* ---------- SCB initialization ---------- */
+
+/**
+ * asd_init_scbs - manually allocate the first SCB.
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This allocates the very first SCB which would be sent to the
+ * sequencer for execution.  Its bus address is written to
+ * CSEQ_Q_NEW_POINTER, mode page 2, mode 8.  Since the bus address of
+ * the _next_ scb to be DMA-ed to the host adapter is read from the last
+ * SCB DMA-ed to the host adapter, we have to always stay one step
+ * ahead of the sequencer and keep one SCB already allocated.
+ */
+static int asd_init_scbs(struct asd_ha_struct *asd_ha)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	int bitmap_bytes;
+
+	/* allocate the index array and bitmap */
+	asd_ha->seq.tc_index_bitmap_bits = asd_ha->hw_prof.max_scbs;
+	asd_ha->seq.tc_index_array = kzalloc(asd_ha->seq.tc_index_bitmap_bits*
+					     sizeof(void *), GFP_KERNEL);
+	if (!asd_ha->seq.tc_index_array)
+		return -ENOMEM;
+
+	bitmap_bytes = (asd_ha->seq.tc_index_bitmap_bits+7)/8;
+	bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long);
+	asd_ha->seq.tc_index_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL);
+	if (!asd_ha->seq.tc_index_bitmap)
+		return -ENOMEM;
+
+	spin_lock_init(&seq->tc_index_lock);
+
+	seq->next_scb.size = sizeof(struct scb);
+	seq->next_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool, GFP_KERNEL,
+					     &seq->next_scb.dma_handle);
+	if (!seq->next_scb.vaddr) {
+		kfree(asd_ha->seq.tc_index_bitmap);
+		kfree(asd_ha->seq.tc_index_array);
+		asd_ha->seq.tc_index_bitmap = NULL;
+		asd_ha->seq.tc_index_array = NULL;
+		return -ENOMEM;
+	}
+
+	seq->pending = 0;
+	spin_lock_init(&seq->pend_q_lock);
+	INIT_LIST_HEAD(&seq->pend_q);
+
+	return 0;
+}
+
+static inline void asd_get_max_scb_ddb(struct asd_ha_struct *asd_ha)
+{
+	asd_ha->hw_prof.max_scbs = asd_get_cmdctx_size(asd_ha)/ASD_SCB_SIZE;
+	asd_ha->hw_prof.max_ddbs = asd_get_devctx_size(asd_ha)/ASD_DDB_SIZE;
+	ASD_DPRINTK("max_scbs:%d, max_ddbs:%d\n",
+		    asd_ha->hw_prof.max_scbs,
+		    asd_ha->hw_prof.max_ddbs);
+}
+
+/* ---------- Done List initialization ---------- */
+
+static void asd_dl_tasklet_handler(unsigned long);
+
+static int asd_init_dl(struct asd_ha_struct *asd_ha)
+{
+	asd_ha->seq.actual_dl
+		= asd_alloc_coherent(asd_ha,
+			     ASD_DL_SIZE * sizeof(struct done_list_struct),
+				     GFP_KERNEL);
+	if (!asd_ha->seq.actual_dl)
+		return -ENOMEM;
+	asd_ha->seq.dl = asd_ha->seq.actual_dl->vaddr;
+	asd_ha->seq.dl_toggle = ASD_DEF_DL_TOGGLE;
+	asd_ha->seq.dl_next = 0;
+	tasklet_init(&asd_ha->seq.dl_tasklet, asd_dl_tasklet_handler,
+		     (unsigned long) asd_ha);
+
+	return 0;
+}
+
+/* ---------- EDB and ESCB init ---------- */
+
+static int asd_alloc_edbs(struct asd_ha_struct *asd_ha, unsigned int gfp_flags)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	int i;
+
+	seq->edb_arr = kmalloc(seq->num_edbs*sizeof(*seq->edb_arr), gfp_flags);
+	if (!seq->edb_arr)
+		return -ENOMEM;
+
+	for (i = 0; i < seq->num_edbs; i++) {
+		seq->edb_arr[i] = asd_alloc_coherent(asd_ha, ASD_EDB_SIZE,
+						     gfp_flags);
+		if (!seq->edb_arr[i])
+			goto Err_unroll;
+		memset(seq->edb_arr[i]->vaddr, 0, ASD_EDB_SIZE);
+	}
+
+	ASD_DPRINTK("num_edbs:%d\n", seq->num_edbs);
+
+	return 0;
+
+Err_unroll:
+	for (i-- ; i >= 0; i--)
+		asd_free_coherent(asd_ha, seq->edb_arr[i]);
+	kfree(seq->edb_arr);
+	seq->edb_arr = NULL;
+
+	return -ENOMEM;
+}
+
+static int asd_alloc_escbs(struct asd_ha_struct *asd_ha,
+			   unsigned int gfp_flags)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	struct asd_ascb *escb;
+	int i, escbs;
+
+	seq->escb_arr = kmalloc(seq->num_escbs*sizeof(*seq->escb_arr),
+				gfp_flags);
+	if (!seq->escb_arr)
+		return -ENOMEM;
+
+	escbs = seq->num_escbs;
+	escb = asd_ascb_alloc_list(asd_ha, &escbs, gfp_flags);
+	if (!escb) {
+		asd_printk("couldn't allocate list of escbs\n");
+		goto Err;
+	}
+	seq->num_escbs -= escbs;  /* subtract what was not allocated */
+	ASD_DPRINTK("num_escbs:%d\n", seq->num_escbs);
+
+	for (i = 0; i < seq->num_escbs; i++, escb = list_entry(escb->list.next,
+							       struct asd_ascb,
+							       list)) {
+		seq->escb_arr[i] = escb;
+		escb->scb->header.opcode = EMPTY_SCB;
+	}
+
+	return 0;
+Err:
+	kfree(seq->escb_arr);
+	seq->escb_arr = NULL;
+	return -ENOMEM;
+
+}
+
+static void asd_assign_edbs2escbs(struct asd_ha_struct *asd_ha)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	int i, k, z = 0;
+
+	for (i = 0; i < seq->num_escbs; i++) {
+		struct asd_ascb *ascb = seq->escb_arr[i];
+		struct empty_scb *escb = &ascb->scb->escb;
+
+		ascb->edb_index = z;
+
+		escb->num_valid = ASD_EDBS_PER_SCB;
+
+		for (k = 0; k < ASD_EDBS_PER_SCB; k++) {
+			struct sg_el *eb = &escb->eb[k];
+			struct asd_dma_tok *edb = seq->edb_arr[z++];
+
+			memset(eb, 0, sizeof(*eb));
+			eb->bus_addr = cpu_to_le64(((u64) edb->dma_handle));
+			eb->size = cpu_to_le32(((u32) edb->size));
+		}
+	}
+}
+
+/**
+ * asd_init_escbs -- allocate and initialize empty scbs
+ * @asd_ha: pointer to host adapter structure
+ *
+ * An empty SCB has sg_elements of ASD_EDBS_PER_SCB (7) buffers.
+ * They transport sense data, etc.
+ */
+static int asd_init_escbs(struct asd_ha_struct *asd_ha)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	int err = 0;
+
+	/* Allocate two empty data buffers (edb) per sequencer. */
+	int edbs = 2*(1+asd_ha->hw_prof.num_phys);
+
+	seq->num_escbs = (edbs+ASD_EDBS_PER_SCB-1)/ASD_EDBS_PER_SCB;
+	seq->num_edbs = seq->num_escbs * ASD_EDBS_PER_SCB;
+
+	err = asd_alloc_edbs(asd_ha, GFP_KERNEL);
+	if (err) {
+		asd_printk("couldn't allocate edbs\n");
+		return err;
+	}
+
+	err = asd_alloc_escbs(asd_ha, GFP_KERNEL);
+	if (err) {
+		asd_printk("couldn't allocate escbs\n");
+		return err;
+	}
+
+	asd_assign_edbs2escbs(asd_ha);
+	/* In order to insure that normal SCBs do not overfill sequencer
+	 * memory and leave no space for escbs (halting condition),
+	 * we increment pending here by the number of escbs.  However,
+	 * escbs are never pending.
+	 */
+	seq->pending   = seq->num_escbs;
+	seq->can_queue = 1 + (asd_ha->hw_prof.max_scbs - seq->pending)/2;
+
+	return 0;
+}
+
+/* ---------- HW initialization ---------- */
+
+/**
+ * asd_chip_hardrst -- hard reset the chip
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This takes 16 cycles and is synchronous to CFCLK, which runs
+ * at 200 MHz, so this should take at most 80 nanoseconds.
+ */
+int asd_chip_hardrst(struct asd_ha_struct *asd_ha)
+{
+	int i;
+	int count = 100;
+	u32 reg;
+
+	for (i = 0 ; i < 4 ; i++) {
+		asd_write_reg_dword(asd_ha, COMBIST, HARDRST);
+	}
+
+	do {
+		udelay(1);
+		reg = asd_read_reg_dword(asd_ha, CHIMINT);
+		if (reg & HARDRSTDET) {
+			asd_write_reg_dword(asd_ha, CHIMINT,
+					    HARDRSTDET|PORRSTDET);
+			return 0;
+		}
+	} while (--count > 0);
+
+	return -ENODEV;
+}
+
+/**
+ * asd_init_chip -- initialize the chip
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Hard resets the chip, disables HA interrupts, downloads the sequnecer
+ * microcode and starts the sequencers.  The caller has to explicitly
+ * enable HA interrupts with asd_enable_ints(asd_ha).
+ */
+static int asd_init_chip(struct asd_ha_struct *asd_ha)
+{
+	int err;
+
+	err = asd_chip_hardrst(asd_ha);
+	if (err) {
+		asd_printk("couldn't hard reset %s\n",
+			    pci_name(asd_ha->pcidev));
+		goto out;
+	}
+
+	asd_disable_ints(asd_ha);
+
+	err = asd_init_seqs(asd_ha);
+	if (err) {
+		asd_printk("couldn't init seqs for %s\n",
+			   pci_name(asd_ha->pcidev));
+		goto out;
+	}
+
+	err = asd_start_seqs(asd_ha);
+	if (err) {
+		asd_printk("coudln't start seqs for %s\n",
+			   pci_name(asd_ha->pcidev));
+		goto out;
+	}
+out:
+	return err;
+}
+
+#define MAX_DEVS ((OCM_MAX_SIZE) / (ASD_DDB_SIZE))
+
+static int max_devs = 0;
+module_param_named(max_devs, max_devs, int, S_IRUGO);
+MODULE_PARM_DESC(max_devs, "\n"
+	"\tMaximum number of SAS devices to support (not LUs).\n"
+	"\tDefault: 2176, Maximum: 65663.\n");
+
+static int max_cmnds = 0;
+module_param_named(max_cmnds, max_cmnds, int, S_IRUGO);
+MODULE_PARM_DESC(max_cmnds, "\n"
+	"\tMaximum number of commands queuable.\n"
+	"\tDefault: 512, Maximum: 66047.\n");
+
+static void asd_extend_devctx_ocm(struct asd_ha_struct *asd_ha)
+{
+	unsigned long dma_addr = OCM_BASE_ADDR;
+	u32 d;
+
+	dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE;
+	asd_write_reg_addr(asd_ha, DEVCTXBASE, (dma_addr_t) dma_addr);
+	d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+	d |= 4;
+	asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+	asd_ha->hw_prof.max_ddbs += MAX_DEVS;
+}
+
+static int asd_extend_devctx(struct asd_ha_struct *asd_ha)
+{
+	dma_addr_t dma_handle;
+	unsigned long dma_addr;
+	u32 d;
+	int size;
+
+	asd_extend_devctx_ocm(asd_ha);
+
+	asd_ha->hw_prof.ddb_ext = NULL;
+	if (max_devs <= asd_ha->hw_prof.max_ddbs || max_devs > 0xFFFF) {
+		max_devs = asd_ha->hw_prof.max_ddbs;
+		return 0;
+	}
+
+	size = (max_devs - asd_ha->hw_prof.max_ddbs + 1) * ASD_DDB_SIZE;
+
+	asd_ha->hw_prof.ddb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL);
+	if (!asd_ha->hw_prof.ddb_ext) {
+		asd_printk("couldn't allocate memory for %d devices\n",
+			   max_devs);
+		max_devs = asd_ha->hw_prof.max_ddbs;
+		return -ENOMEM;
+	}
+	dma_handle = asd_ha->hw_prof.ddb_ext->dma_handle;
+	dma_addr = ALIGN((unsigned long) dma_handle, ASD_DDB_SIZE);
+	dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE;
+	dma_handle = (dma_addr_t) dma_addr;
+	asd_write_reg_addr(asd_ha, DEVCTXBASE, dma_handle);
+	d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+	d &= ~4;
+	asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+
+	asd_ha->hw_prof.max_ddbs = max_devs;
+
+	return 0;
+}
+
+static int asd_extend_cmdctx(struct asd_ha_struct *asd_ha)
+{
+	dma_addr_t dma_handle;
+	unsigned long dma_addr;
+	u32 d;
+	int size;
+
+	asd_ha->hw_prof.scb_ext = NULL;
+	if (max_cmnds <= asd_ha->hw_prof.max_scbs || max_cmnds > 0xFFFF) {
+		max_cmnds = asd_ha->hw_prof.max_scbs;
+		return 0;
+	}
+
+	size = (max_cmnds - asd_ha->hw_prof.max_scbs + 1) * ASD_SCB_SIZE;
+
+	asd_ha->hw_prof.scb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL);
+	if (!asd_ha->hw_prof.scb_ext) {
+		asd_printk("couldn't allocate memory for %d commands\n",
+			   max_cmnds);
+		max_cmnds = asd_ha->hw_prof.max_scbs;
+		return -ENOMEM;
+	}
+	dma_handle = asd_ha->hw_prof.scb_ext->dma_handle;
+	dma_addr = ALIGN((unsigned long) dma_handle, ASD_SCB_SIZE);
+	dma_addr -= asd_ha->hw_prof.max_scbs * ASD_SCB_SIZE;
+	dma_handle = (dma_addr_t) dma_addr;
+	asd_write_reg_addr(asd_ha, CMDCTXBASE, dma_handle);
+	d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+	d &= ~1;
+	asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+
+	asd_ha->hw_prof.max_scbs = max_cmnds;
+
+	return 0;
+}
+
+/**
+ * asd_init_ctxmem -- initialize context memory
+ * asd_ha: pointer to host adapter structure
+ *
+ * This function sets the maximum number of SCBs and
+ * DDBs which can be used by the sequencer.  This is normally
+ * 512 and 128 respectively.  If support for more SCBs or more DDBs
+ * is required then CMDCTXBASE, DEVCTXBASE and CTXDOMAIN are
+ * initialized here to extend context memory to point to host memory,
+ * thus allowing unlimited support for SCBs and DDBs -- only limited
+ * by host memory.
+ */
+static int asd_init_ctxmem(struct asd_ha_struct *asd_ha)
+{
+	int bitmap_bytes;
+
+	asd_get_max_scb_ddb(asd_ha);
+	asd_extend_devctx(asd_ha);
+	asd_extend_cmdctx(asd_ha);
+
+	/* The kernel wants bitmaps to be unsigned long sized. */
+	bitmap_bytes = (asd_ha->hw_prof.max_ddbs+7)/8;
+	bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long);
+	asd_ha->hw_prof.ddb_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL);
+	if (!asd_ha->hw_prof.ddb_bitmap)
+		return -ENOMEM;
+	spin_lock_init(&asd_ha->hw_prof.ddb_lock);
+
+	return 0;
+}
+
+int asd_init_hw(struct asd_ha_struct *asd_ha)
+{
+	int err;
+	u32 v;
+
+	err = asd_init_sw(asd_ha);
+	if (err)
+		return err;
+
+	err = pci_read_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL, &v);
+	if (err) {
+		asd_printk("couldn't read PCIC_HSTPCIX_CNTRL of %s\n",
+			   pci_name(asd_ha->pcidev));
+		return err;
+	}
+	pci_write_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL,
+					v | SC_TMR_DIS);
+	if (err) {
+		asd_printk("couldn't disable split completion timer of %s\n",
+			   pci_name(asd_ha->pcidev));
+		return err;
+	}
+
+	err = asd_read_ocm(asd_ha);
+	if (err) {
+		asd_printk("couldn't read ocm(%d)\n", err);
+		/* While suspicios, it is not an error that we
+		 * couldn't read the OCM. */
+	}
+
+	err = asd_read_flash(asd_ha);
+	if (err) {
+		asd_printk("couldn't read flash(%d)\n", err);
+		/* While suspicios, it is not an error that we
+		 * couldn't read FLASH memory.
+		 */
+	}
+
+	asd_init_ctxmem(asd_ha);
+
+	asd_get_user_sas_addr(asd_ha);
+	if (!asd_ha->hw_prof.sas_addr[0]) {
+		asd_printk("No SAS Address provided for %s\n",
+			   pci_name(asd_ha->pcidev));
+		err = -ENODEV;
+		goto Out;
+	}
+
+	asd_propagate_sas_addr(asd_ha);
+
+	err = asd_init_phys(asd_ha);
+	if (err) {
+		asd_printk("couldn't initialize phys for %s\n",
+			    pci_name(asd_ha->pcidev));
+		goto Out;
+	}
+
+	err = asd_init_scbs(asd_ha);
+	if (err) {
+		asd_printk("couldn't initialize scbs for %s\n",
+			    pci_name(asd_ha->pcidev));
+		goto Out;
+	}
+
+	err = asd_init_dl(asd_ha);
+	if (err) {
+		asd_printk("couldn't initialize the done list:%d\n",
+			    err);
+		goto Out;
+	}
+
+	err = asd_init_escbs(asd_ha);
+	if (err) {
+		asd_printk("couldn't initialize escbs\n");
+		goto Out;
+	}
+
+	err = asd_init_chip(asd_ha);
+	if (err) {
+		asd_printk("couldn't init the chip\n");
+		goto Out;
+	}
+Out:
+	return err;
+}
+
+/* ---------- Chip reset ---------- */
+
+/**
+ * asd_chip_reset -- reset the host adapter, etc
+ * @asd_ha: pointer to host adapter structure of interest
+ *
+ * Called from the ISR.  Hard reset the chip.  Let everything
+ * timeout.  This should be no different than hot-unplugging the
+ * host adapter.  Once everything times out we'll init the chip with
+ * a call to asd_init_chip() and enable interrupts with asd_enable_ints().
+ * XXX finish.
+ */
+static void asd_chip_reset(struct asd_ha_struct *asd_ha)
+{
+	struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+
+	ASD_DPRINTK("chip reset for %s\n", pci_name(asd_ha->pcidev));
+	asd_chip_hardrst(asd_ha);
+	sas_ha->notify_ha_event(sas_ha, HAE_RESET);
+}
+
+/* ---------- Done List Routines ---------- */
+
+static void asd_dl_tasklet_handler(unsigned long data)
+{
+	struct asd_ha_struct *asd_ha = (struct asd_ha_struct *) data;
+	struct asd_seq_data *seq = &asd_ha->seq;
+	unsigned long flags;
+
+	while (1) {
+		struct done_list_struct *dl = &seq->dl[seq->dl_next];
+		struct asd_ascb *ascb;
+
+		if ((dl->toggle & DL_TOGGLE_MASK) != seq->dl_toggle)
+			break;
+
+		/* find the aSCB */
+		spin_lock_irqsave(&seq->tc_index_lock, flags);
+		ascb = asd_tc_index_find(seq, (int)le16_to_cpu(dl->index));
+		spin_unlock_irqrestore(&seq->tc_index_lock, flags);
+		if (unlikely(!ascb)) {
+			ASD_DPRINTK("BUG:sequencer:dl:no ascb?!\n");
+			goto next_1;
+		} else if (ascb->scb->header.opcode == EMPTY_SCB) {
+			goto out;
+		} else if (!ascb->uldd_timer && !del_timer(&ascb->timer)) {
+			goto next_1;
+		}
+		spin_lock_irqsave(&seq->pend_q_lock, flags);
+		list_del_init(&ascb->list);
+		seq->pending--;
+		spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+	out:
+		ascb->tasklet_complete(ascb, dl);
+
+	next_1:
+		seq->dl_next = (seq->dl_next + 1) & (ASD_DL_SIZE-1);
+		if (!seq->dl_next)
+			seq->dl_toggle ^= DL_TOGGLE_MASK;
+	}
+}
+
+/* ---------- Interrupt Service Routines ---------- */
+
+/**
+ * asd_process_donelist_isr -- schedule processing of done list entries
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_process_donelist_isr(struct asd_ha_struct *asd_ha)
+{
+	tasklet_schedule(&asd_ha->seq.dl_tasklet);
+}
+
+/**
+ * asd_com_sas_isr -- process device communication interrupt (COMINT)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_com_sas_isr(struct asd_ha_struct *asd_ha)
+{
+	u32 comstat = asd_read_reg_dword(asd_ha, COMSTAT);
+
+	/* clear COMSTAT int */
+	asd_write_reg_dword(asd_ha, COMSTAT, 0xFFFFFFFF);
+
+	if (comstat & CSBUFPERR) {
+		asd_printk("%s: command/status buffer dma parity error\n",
+			   pci_name(asd_ha->pcidev));
+	} else if (comstat & CSERR) {
+		int i;
+		u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR);
+		dmaerr &= 0xFF;
+		asd_printk("%s: command/status dma error, DMAERR: 0x%02x, "
+			   "CSDMAADR: 0x%04x, CSDMAADR+4: 0x%04x\n",
+			   pci_name(asd_ha->pcidev),
+			   dmaerr,
+			   asd_read_reg_dword(asd_ha, CSDMAADR),
+			   asd_read_reg_dword(asd_ha, CSDMAADR+4));
+		asd_printk("CSBUFFER:\n");
+		for (i = 0; i < 8; i++) {
+			asd_printk("%08x %08x %08x %08x\n",
+				   asd_read_reg_dword(asd_ha, CSBUFFER),
+				   asd_read_reg_dword(asd_ha, CSBUFFER+4),
+				   asd_read_reg_dword(asd_ha, CSBUFFER+8),
+				   asd_read_reg_dword(asd_ha, CSBUFFER+12));
+		}
+		asd_dump_seq_state(asd_ha, 0);
+	} else if (comstat & OVLYERR) {
+		u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR);
+		dmaerr = (dmaerr >> 8) & 0xFF;
+		asd_printk("%s: overlay dma error:0x%x\n",
+			   pci_name(asd_ha->pcidev),
+			   dmaerr);
+	}
+	asd_chip_reset(asd_ha);
+}
+
+static inline void asd_arp2_err(struct asd_ha_struct *asd_ha, u32 dchstatus)
+{
+	static const char *halt_code[256] = {
+		"UNEXPECTED_INTERRUPT0",
+		"UNEXPECTED_INTERRUPT1",
+		"UNEXPECTED_INTERRUPT2",
+		"UNEXPECTED_INTERRUPT3",
+		"UNEXPECTED_INTERRUPT4",
+		"UNEXPECTED_INTERRUPT5",
+		"UNEXPECTED_INTERRUPT6",
+		"UNEXPECTED_INTERRUPT7",
+		"UNEXPECTED_INTERRUPT8",
+		"UNEXPECTED_INTERRUPT9",
+		"UNEXPECTED_INTERRUPT10",
+		[11 ... 19] = "unknown[11,19]",
+		"NO_FREE_SCB_AVAILABLE",
+		"INVALID_SCB_OPCODE",
+		"INVALID_MBX_OPCODE",
+		"INVALID_ATA_STATE",
+		"ATA_QUEUE_FULL",
+		"ATA_TAG_TABLE_FAULT",
+		"ATA_TAG_MASK_FAULT",
+		"BAD_LINK_QUEUE_STATE",
+		"DMA2CHIM_QUEUE_ERROR",
+		"EMPTY_SCB_LIST_FULL",
+		"unknown[30]",
+		"IN_USE_SCB_ON_FREE_LIST",
+		"BAD_OPEN_WAIT_STATE",
+		"INVALID_STP_AFFILIATION",
+		"unknown[34]",
+		"EXEC_QUEUE_ERROR",
+		"TOO_MANY_EMPTIES_NEEDED",
+		"EMPTY_REQ_QUEUE_ERROR",
+		"Q_MONIRTT_MGMT_ERROR",
+		"TARGET_MODE_FLOW_ERROR",
+		"DEVICE_QUEUE_NOT_FOUND",
+		"START_IRTT_TIMER_ERROR",
+		"ABORT_TASK_ILLEGAL_REQ",
+		[43 ... 255] = "unknown[43,255]"
+	};
+
+	if (dchstatus & CSEQINT) {
+		u32 arp2int = asd_read_reg_dword(asd_ha, CARP2INT);
+
+		if (arp2int & (ARP2WAITTO|ARP2ILLOPC|ARP2PERR|ARP2CIOPERR)) {
+			asd_printk("%s: CSEQ arp2int:0x%x\n",
+				   pci_name(asd_ha->pcidev),
+				   arp2int);
+		} else if (arp2int & ARP2HALTC)
+			asd_printk("%s: CSEQ halted: %s\n",
+				   pci_name(asd_ha->pcidev),
+				   halt_code[(arp2int>>16)&0xFF]);
+		else
+			asd_printk("%s: CARP2INT:0x%x\n",
+				   pci_name(asd_ha->pcidev),
+				   arp2int);
+	}
+	if (dchstatus & LSEQINT_MASK) {
+		int lseq;
+		u8  lseq_mask = dchstatus & LSEQINT_MASK;
+
+		for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+			u32 arp2int = asd_read_reg_dword(asd_ha,
+							 LmARP2INT(lseq));
+			if (arp2int & (ARP2WAITTO | ARP2ILLOPC | ARP2PERR
+				       | ARP2CIOPERR)) {
+				asd_printk("%s: LSEQ%d arp2int:0x%x\n",
+					   pci_name(asd_ha->pcidev),
+					   lseq, arp2int);
+				/* XXX we should only do lseq reset */
+			} else if (arp2int & ARP2HALTC)
+				asd_printk("%s: LSEQ%d halted: %s\n",
+					   pci_name(asd_ha->pcidev),
+					   lseq,halt_code[(arp2int>>16)&0xFF]);
+			else
+				asd_printk("%s: LSEQ%d ARP2INT:0x%x\n",
+					   pci_name(asd_ha->pcidev), lseq,
+					   arp2int);
+		}
+	}
+	asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_dch_sas_isr -- process device channel interrupt (DEVINT)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_dch_sas_isr(struct asd_ha_struct *asd_ha)
+{
+	u32 dchstatus = asd_read_reg_dword(asd_ha, DCHSTATUS);
+
+	if (dchstatus & CFIFTOERR) {
+		asd_printk("%s: CFIFTOERR\n", pci_name(asd_ha->pcidev));
+		asd_chip_reset(asd_ha);
+	} else
+		asd_arp2_err(asd_ha, dchstatus);
+}
+
+/**
+ * ads_rbi_exsi_isr -- process external system interface interrupt (INITERR)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_rbi_exsi_isr(struct asd_ha_struct *asd_ha)
+{
+	u32 stat0r = asd_read_reg_dword(asd_ha, ASISTAT0R);
+
+	if (!(stat0r & ASIERR)) {
+		asd_printk("hmm, EXSI interrupted but no error?\n");
+		return;
+	}
+
+	if (stat0r & ASIFMTERR) {
+		asd_printk("ASI SEEPROM format error for %s\n",
+			   pci_name(asd_ha->pcidev));
+	} else if (stat0r & ASISEECHKERR) {
+		u32 stat1r = asd_read_reg_dword(asd_ha, ASISTAT1R);
+		asd_printk("ASI SEEPROM checksum 0x%x error for %s\n",
+			   stat1r & CHECKSUM_MASK,
+			   pci_name(asd_ha->pcidev));
+	} else {
+		u32 statr = asd_read_reg_dword(asd_ha, ASIERRSTATR);
+
+		if (!(statr & CPI2ASIMSTERR_MASK)) {
+			ASD_DPRINTK("hmm, ASIERR?\n");
+			return;
+		} else {
+			u32 addr = asd_read_reg_dword(asd_ha, ASIERRADDR);
+			u32 data = asd_read_reg_dword(asd_ha, ASIERRDATAR);
+
+			asd_printk("%s: CPI2 xfer err: addr: 0x%x, wdata: 0x%x, "
+				   "count: 0x%x, byteen: 0x%x, targerr: 0x%x "
+				   "master id: 0x%x, master err: 0x%x\n",
+				   pci_name(asd_ha->pcidev),
+				   addr, data,
+				   (statr & CPI2ASIBYTECNT_MASK) >> 16,
+				   (statr & CPI2ASIBYTEEN_MASK) >> 12,
+				   (statr & CPI2ASITARGERR_MASK) >> 8,
+				   (statr & CPI2ASITARGMID_MASK) >> 4,
+				   (statr & CPI2ASIMSTERR_MASK));
+		}
+	}
+	asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_hst_pcix_isr -- process host interface interrupts
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Asserted on PCIX errors: target abort, etc.
+ */
+static inline void asd_hst_pcix_isr(struct asd_ha_struct *asd_ha)
+{
+	u16 status;
+	u32 pcix_status;
+	u32 ecc_status;
+
+	pci_read_config_word(asd_ha->pcidev, PCI_STATUS, &status);
+	pci_read_config_dword(asd_ha->pcidev, PCIX_STATUS, &pcix_status);
+	pci_read_config_dword(asd_ha->pcidev, ECC_CTRL_STAT, &ecc_status);
+
+	if (status & PCI_STATUS_DETECTED_PARITY)
+		asd_printk("parity error for %s\n", pci_name(asd_ha->pcidev));
+	else if (status & PCI_STATUS_REC_MASTER_ABORT)
+		asd_printk("master abort for %s\n", pci_name(asd_ha->pcidev));
+	else if (status & PCI_STATUS_REC_TARGET_ABORT)
+		asd_printk("target abort for %s\n", pci_name(asd_ha->pcidev));
+	else if (status & PCI_STATUS_PARITY)
+		asd_printk("data parity for %s\n", pci_name(asd_ha->pcidev));
+	else if (pcix_status & RCV_SCE) {
+		asd_printk("received split completion error for %s\n",
+			   pci_name(asd_ha->pcidev));
+		pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status);
+		/* XXX: Abort task? */
+		return;
+	} else if (pcix_status & UNEXP_SC) {
+		asd_printk("unexpected split completion for %s\n",
+			   pci_name(asd_ha->pcidev));
+		pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status);
+		/* ignore */
+		return;
+	} else if (pcix_status & SC_DISCARD)
+		asd_printk("split completion discarded for %s\n",
+			   pci_name(asd_ha->pcidev));
+	else if (ecc_status & UNCOR_ECCERR)
+		asd_printk("uncorrectable ECC error for %s\n",
+			   pci_name(asd_ha->pcidev));
+	asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_hw_isr -- host adapter interrupt service routine
+ * @irq: ignored
+ * @dev_id: pointer to host adapter structure
+ * @regs: ignored
+ *
+ * The ISR processes done list entries and level 3 error handling.
+ */
+irqreturn_t asd_hw_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct asd_ha_struct *asd_ha = dev_id;
+	u32 chimint = asd_read_reg_dword(asd_ha, CHIMINT);
+
+	if (!chimint)
+		return IRQ_NONE;
+
+	asd_write_reg_dword(asd_ha, CHIMINT, chimint);
+	(void) asd_read_reg_dword(asd_ha, CHIMINT);
+
+	if (chimint & DLAVAIL)
+		asd_process_donelist_isr(asd_ha);
+	if (chimint & COMINT)
+		asd_com_sas_isr(asd_ha);
+	if (chimint & DEVINT)
+		asd_dch_sas_isr(asd_ha);
+	if (chimint & INITERR)
+		asd_rbi_exsi_isr(asd_ha);
+	if (chimint & HOSTERR)
+		asd_hst_pcix_isr(asd_ha);
+
+	return IRQ_HANDLED;
+}
+
+/* ---------- SCB handling ---------- */
+
+static inline struct asd_ascb *asd_ascb_alloc(struct asd_ha_struct *asd_ha,
+					      unsigned int gfp_flags)
+{
+	extern kmem_cache_t *asd_ascb_cache;
+	struct asd_seq_data *seq = &asd_ha->seq;
+	struct asd_ascb *ascb;
+	unsigned long flags;
+
+	ascb = kmem_cache_alloc(asd_ascb_cache, gfp_flags);
+
+	if (ascb) {
+		memset(ascb, 0, sizeof(*ascb));
+		ascb->dma_scb.size = sizeof(struct scb);
+		ascb->dma_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool,
+						     gfp_flags,
+						    &ascb->dma_scb.dma_handle);
+		if (!ascb->dma_scb.vaddr) {
+			kmem_cache_free(asd_ascb_cache, ascb);
+			return NULL;
+		}
+		memset(ascb->dma_scb.vaddr, 0, sizeof(struct scb));
+		asd_init_ascb(asd_ha, ascb);
+
+		spin_lock_irqsave(&seq->tc_index_lock, flags);
+		ascb->tc_index = asd_tc_index_get(seq, ascb);
+		spin_unlock_irqrestore(&seq->tc_index_lock, flags);
+		if (ascb->tc_index == -1)
+			goto undo;
+
+		ascb->scb->header.index = cpu_to_le16((u16)ascb->tc_index);
+	}
+
+	return ascb;
+undo:
+	dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
+		      ascb->dma_scb.dma_handle);
+	kmem_cache_free(asd_ascb_cache, ascb);
+	ASD_DPRINTK("no index for ascb\n");
+	return NULL;
+}
+
+/**
+ * asd_ascb_alloc_list -- allocate a list of aSCBs
+ * @asd_ha: pointer to host adapter structure
+ * @num: pointer to integer number of aSCBs
+ * @gfp_flags: GFP_ flags.
+ *
+ * This is the only function which is used to allocate aSCBs.
+ * It can allocate one or many. If more than one, then they form
+ * a linked list in two ways: by their list field of the ascb struct
+ * and by the next_scb field of the scb_header.
+ *
+ * Returns NULL if no memory was available, else pointer to a list
+ * of ascbs.  When this function returns, @num would be the number
+ * of SCBs which were not able to be allocated, 0 if all requested
+ * were able to be allocated.
+ */
+struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
+				     *asd_ha, int *num,
+				     unsigned int gfp_flags)
+{
+	struct asd_ascb *first = NULL;
+
+	for ( ; *num > 0; --*num) {
+		struct asd_ascb *ascb = asd_ascb_alloc(asd_ha, gfp_flags);
+
+		if (!ascb)
+			break;
+		else if (!first)
+			first = ascb;
+		else {
+			struct asd_ascb *last = list_entry(first->list.prev,
+							   struct asd_ascb,
+							   list);
+			list_add_tail(&ascb->list, &first->list);
+			last->scb->header.next_scb =
+				cpu_to_le64(((u64)ascb->dma_scb.dma_handle));
+		}
+	}
+
+	return first;
+}
+
+/**
+ * asd_swap_head_scb -- swap the head scb
+ * @asd_ha: pointer to host adapter structure
+ * @ascb: pointer to the head of an ascb list
+ *
+ * The sequencer knows the DMA address of the next SCB to be DMAed to
+ * the host adapter, from initialization or from the last list DMAed.
+ * seq->next_scb keeps the address of this SCB.  The sequencer will
+ * DMA to the host adapter this list of SCBs.  But the head (first
+ * element) of this list is not known to the sequencer.  Here we swap
+ * the head of the list with the known SCB (memcpy()).
+ * Only one memcpy() is required per list so it is in our interest
+ * to keep the list of SCB as long as possible so that the ratio
+ * of number of memcpy calls to the number of SCB DMA-ed is as small
+ * as possible.
+ *
+ * LOCKING: called with the pending list lock held.
+ */
+static inline void asd_swap_head_scb(struct asd_ha_struct *asd_ha,
+				     struct asd_ascb *ascb)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	struct asd_ascb *last = list_entry(ascb->list.prev,
+					   struct asd_ascb,
+					   list);
+	struct asd_dma_tok t = ascb->dma_scb;
+
+	memcpy(seq->next_scb.vaddr, ascb->scb, sizeof(*ascb->scb));
+	ascb->dma_scb = seq->next_scb;
+	ascb->scb = ascb->dma_scb.vaddr;
+	seq->next_scb = t;
+	last->scb->header.next_scb =
+		cpu_to_le64(((u64)seq->next_scb.dma_handle));
+}
+
+/**
+ * asd_start_timers -- (add and) start timers of SCBs
+ * @list: pointer to struct list_head of the scbs
+ * @to: timeout in jiffies
+ *
+ * If an SCB in the @list has no timer function, assign the default
+ * one,  then start the timer of the SCB.  This function is
+ * intended to be called from asd_post_ascb_list(), just prior to
+ * posting the SCBs to the sequencer.
+ */
+static inline void asd_start_scb_timers(struct list_head *list)
+{
+	struct asd_ascb *ascb;
+	list_for_each_entry(ascb, list, list) {
+		if (!ascb->uldd_timer) {
+			ascb->timer.data = (unsigned long) ascb;
+			ascb->timer.function = asd_ascb_timedout;
+			ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT;
+			add_timer(&ascb->timer);
+		}
+	}
+}
+
+/**
+ * asd_post_ascb_list -- post a list of 1 or more aSCBs to the host adapter
+ * @asd_ha: pointer to a host adapter structure
+ * @ascb: pointer to the first aSCB in the list
+ * @num: number of aSCBs in the list (to be posted)
+ *
+ * See queueing comment in asd_post_escb_list().
+ *
+ * Additional note on queuing: In order to minimize the ratio of memcpy()
+ * to the number of ascbs sent, we try to batch-send as many ascbs as possible
+ * in one go.
+ * Two cases are possible:
+ *    A) can_queue >= num,
+ *    B) can_queue < num.
+ * Case A: we can send the whole batch at once.  Increment "pending"
+ * in the beginning of this function, when it is checked, in order to
+ * eliminate races when this function is called by multiple processes.
+ * Case B: should never happen if the managing layer considers
+ * lldd_queue_size.
+ */
+int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+		       int num)
+{
+	unsigned long flags;
+	LIST_HEAD(list);
+	int can_queue;
+
+	spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+	can_queue = asd_ha->hw_prof.max_scbs - asd_ha->seq.pending;
+	if (can_queue >= num)
+		asd_ha->seq.pending += num;
+	else
+		can_queue = 0;
+
+	if (!can_queue) {
+		spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+		asd_printk("%s: scb queue full\n", pci_name(asd_ha->pcidev));
+		return -SAS_QUEUE_FULL;
+	}
+
+	asd_swap_head_scb(asd_ha, ascb);
+
+	__list_add(&list, ascb->list.prev, &ascb->list);
+
+	asd_start_scb_timers(&list);
+
+	asd_ha->seq.scbpro += num;
+	list_splice_init(&list, asd_ha->seq.pend_q.prev);
+	asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro);
+	spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+	return 0;
+}
+
+/**
+ * asd_post_escb_list -- post a list of 1 or more empty scb
+ * @asd_ha: pointer to a host adapter structure
+ * @ascb: pointer to the first empty SCB in the list
+ * @num: number of aSCBs in the list (to be posted)
+ *
+ * This is essentially the same as asd_post_ascb_list, but we do not
+ * increment pending, add those to the pending list or get indexes.
+ * See asd_init_escbs() and asd_init_post_escbs().
+ *
+ * Since sending a list of ascbs is a superset of sending a single
+ * ascb, this function exists to generalize this.  More specifically,
+ * when sending a list of those, we want to do only a _single_
+ * memcpy() at swap head, as opposed to for each ascb sent (in the
+ * case of sending them one by one).  That is, we want to minimize the
+ * ratio of memcpy() operations to the number of ascbs sent.  The same
+ * logic applies to asd_post_ascb_list().
+ */
+int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+		       int num)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+	asd_swap_head_scb(asd_ha, ascb);
+	asd_ha->seq.scbpro += num;
+	asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro);
+	spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+	return 0;
+}
+
+/* ---------- LED ---------- */
+
+/**
+ * asd_turn_led -- turn on/off an LED
+ * @asd_ha: pointer to host adapter structure
+ * @phy_id: the PHY id whose LED we want to manupulate
+ * @op: 1 to turn on, 0 to turn off
+ */
+void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op)
+{
+	if (phy_id < ASD_MAX_PHYS) {
+		u32 v = asd_read_reg_dword(asd_ha, LmCONTROL(phy_id));
+		if (op)
+			v |= LEDPOL;
+		else
+			v &= ~LEDPOL;
+		asd_write_reg_dword(asd_ha, LmCONTROL(phy_id), v);
+	}
+}
+
+/**
+ * asd_control_led -- enable/disable an LED on the board
+ * @asd_ha: pointer to host adapter structure
+ * @phy_id: integer, the phy id
+ * @op: integer, 1 to enable, 0 to disable the LED
+ *
+ * First we output enable the LED, then we set the source
+ * to be an external module.
+ */
+void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op)
+{
+	if (phy_id < ASD_MAX_PHYS) {
+		u32 v;
+
+		v = asd_read_reg_dword(asd_ha, GPIOOER);
+		if (op)
+			v |= (1 << phy_id);
+		else
+			v &= ~(1 << phy_id);
+		asd_write_reg_dword(asd_ha, GPIOOER, v);
+
+		v = asd_read_reg_dword(asd_ha, GPIOCNFGR);
+		if (op)
+			v |= (1 << phy_id);
+		else
+			v &= ~(1 << phy_id);
+		asd_write_reg_dword(asd_ha, GPIOCNFGR, v);
+	}
+}
+
+/* ---------- PHY enable ---------- */
+
+static int asd_enable_phy(struct asd_ha_struct *asd_ha, int phy_id)
+{
+	struct asd_phy *phy = &asd_ha->phys[phy_id];
+
+	asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, INT_ENABLE_2), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, HOT_PLUG_DELAY),
+			   HOTPLUG_DELAY_TIMEOUT);
+
+	/* Get defaults from manuf. sector */
+	/* XXX we need defaults for those in case MS is broken. */
+	asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_0),
+			   phy->phy_desc->phy_control_0);
+	asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_1),
+			   phy->phy_desc->phy_control_1);
+	asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_2),
+			   phy->phy_desc->phy_control_2);
+	asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_3),
+			   phy->phy_desc->phy_control_3);
+
+	asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(phy_id),
+			    ASD_COMINIT_TIMEOUT);
+
+	asd_write_reg_addr(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(phy_id),
+			   phy->id_frm_tok->dma_handle);
+
+	asd_control_led(asd_ha, phy_id, 1);
+
+	return 0;
+}
+
+int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask)
+{
+	u8  phy_m;
+	u8  i;
+	int num = 0, k;
+	struct asd_ascb *ascb;
+	struct asd_ascb *ascb_list;
+
+	if (!phy_mask) {
+		asd_printk("%s called with phy_mask of 0!?\n", __FUNCTION__);
+		return 0;
+	}
+
+	for_each_phy(phy_mask, phy_m, i) {
+		num++;
+		asd_enable_phy(asd_ha, i);
+	}
+
+	k = num;
+	ascb_list = asd_ascb_alloc_list(asd_ha, &k, GFP_KERNEL);
+	if (!ascb_list) {
+		asd_printk("no memory for control phy ascb list\n");
+		return -ENOMEM;
+	}
+	num -= k;
+
+	ascb = ascb_list;
+	for_each_phy(phy_mask, phy_m, i) {
+		asd_build_control_phy(ascb, i, ENABLE_PHY);
+		ascb = list_entry(ascb->list.next, struct asd_ascb, list);
+	}
+	ASD_DPRINTK("posting %d control phy scbs\n", num);
+	k = asd_post_ascb_list(asd_ha, ascb_list, num);
+	if (k)
+		asd_ascb_free_list(ascb_list);
+
+	return k;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.h b/drivers/scsi/aic94xx/aic94xx_hwi.h
new file mode 100644
index 000000000000..c7d505388fed
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.h
@@ -0,0 +1,397 @@
+/*
+ * Aic94xx SAS/SATA driver hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef _AIC94XX_HWI_H_
+#define _AIC94XX_HWI_H_
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <scsi/libsas.h>
+
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+
+/* Define ASD_MAX_PHYS to the maximum phys ever. Currently 8. */
+#define ASD_MAX_PHYS       8
+#define ASD_PCBA_SN_SIZE   12
+
+/* Those are to be further named properly, the "RAZORx" part, and
+ * subsequently included in include/linux/pci_ids.h.
+ */
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR10 0x410
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR12 0x412
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1E 0x41E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR30 0x430
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR32 0x432
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3E 0x43E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3F 0x43F
+
+struct asd_ha_addrspace {
+	void __iomem  *addr;
+	unsigned long  start;       /* pci resource start */
+	unsigned long  len;         /* pci resource len */
+	unsigned long  flags;       /* pci resource flags */
+
+	/* addresses internal to the host adapter */
+	u32 swa_base; /* mmspace 1 (MBAR1) uses this only */
+	u32 swb_base;
+	u32 swc_base;
+};
+
+struct bios_struct {
+	int    present;
+	u8     maj;
+	u8     min;
+	u32    bld;
+};
+
+struct unit_element_struct {
+	u16    num;
+	u16    size;
+	void   *area;
+};
+
+struct flash_struct {
+	u32    bar;
+	int    present;
+	int    wide;
+	u8     manuf;
+	u8     dev_id;
+	u8     sec_prot;
+
+	u32    dir_offs;
+};
+
+struct asd_phy_desc {
+	/* From CTRL-A settings, then set to what is appropriate */
+	u8     sas_addr[SAS_ADDR_SIZE];
+	u8     max_sas_lrate;
+	u8     min_sas_lrate;
+	u8     max_sata_lrate;
+	u8     min_sata_lrate;
+	u8     flags;
+#define ASD_CRC_DIS  1
+#define ASD_SATA_SPINUP_HOLD 2
+
+	u8     phy_control_0; /* mode 5 reg 0x160 */
+	u8     phy_control_1; /* mode 5 reg 0x161 */
+	u8     phy_control_2; /* mode 5 reg 0x162 */
+	u8     phy_control_3; /* mode 5 reg 0x163 */
+};
+
+struct asd_dma_tok {
+	void *vaddr;
+	dma_addr_t dma_handle;
+	size_t size;
+};
+
+struct hw_profile {
+	struct bios_struct bios;
+	struct unit_element_struct ue;
+	struct flash_struct flash;
+
+	u8     sas_addr[SAS_ADDR_SIZE];
+	char   pcba_sn[ASD_PCBA_SN_SIZE+1];
+
+	u8     enabled_phys;	  /* mask of enabled phys */
+	struct asd_phy_desc phy_desc[ASD_MAX_PHYS];
+	u32    max_scbs;	  /* absolute sequencer scb queue size */
+	struct asd_dma_tok *scb_ext;
+	u32    max_ddbs;
+	struct asd_dma_tok *ddb_ext;
+
+	spinlock_t ddb_lock;
+	void  *ddb_bitmap;
+
+	int    num_phys;	  /* ENABLEABLE */
+	int    max_phys;	  /* REPORTED + ENABLEABLE */
+
+	unsigned addr_range;	  /* max # of addrs; max # of possible ports */
+	unsigned port_name_base;
+	unsigned dev_name_base;
+	unsigned sata_name_base;
+};
+
+struct asd_ascb {
+	struct list_head list;
+	struct asd_ha_struct *ha;
+
+	struct scb *scb;	  /* equals dma_scb->vaddr */
+	struct asd_dma_tok dma_scb;
+	struct asd_dma_tok *sg_arr;
+
+	void (*tasklet_complete)(struct asd_ascb *, struct done_list_struct *);
+	u8     uldd_timer:1;
+
+	/* internally generated command */
+	struct timer_list timer;
+	struct completion completion;
+	u8        tag_valid:1;
+	__be16    tag;		  /* error recovery only */
+
+	/* If this is an Empty SCB, index of first edb in seq->edb_arr. */
+	int    edb_index;
+
+	/* Used by the timer timeout function. */
+	int    tc_index;
+
+	void   *uldd_task;
+};
+
+#define ASD_DL_SIZE_BITS   0x8
+#define ASD_DL_SIZE        (1<<(2+ASD_DL_SIZE_BITS))
+#define ASD_DEF_DL_TOGGLE  0x01
+
+struct asd_seq_data {
+	spinlock_t pend_q_lock;
+	u16    scbpro;
+	int    pending;
+	struct list_head pend_q;
+	int    can_queue;	  /* per adapter */
+	struct asd_dma_tok next_scb; /* next scb to be delivered to CSEQ */
+
+	spinlock_t tc_index_lock;
+	void **tc_index_array;
+	void *tc_index_bitmap;
+	int   tc_index_bitmap_bits;
+
+	struct tasklet_struct dl_tasklet;
+	struct done_list_struct *dl; /* array of done list entries, equals */
+	struct asd_dma_tok *actual_dl; /* actual_dl->vaddr */
+	int    dl_toggle;
+	int    dl_next;
+
+	int    num_edbs;
+	struct asd_dma_tok **edb_arr;
+	int    num_escbs;
+	struct asd_ascb **escb_arr; /* array of pointers to escbs */
+};
+
+/* This is the Host Adapter structure.  It describes the hardware
+ * SAS adapter.
+ */
+struct asd_ha_struct {
+	struct pci_dev   *pcidev;
+	const char       *name;
+
+	struct sas_ha_struct sas_ha;
+
+	u8                revision_id;
+
+	int               iospace;
+	spinlock_t        iolock;
+	struct asd_ha_addrspace io_handle[2];
+
+	struct hw_profile hw_prof;
+
+	struct asd_phy    phys[ASD_MAX_PHYS];
+	struct asd_sas_port   ports[ASD_MAX_PHYS];
+
+	struct dma_pool  *scb_pool;
+
+	struct asd_seq_data  seq; /* sequencer related */
+};
+
+/* ---------- Common macros ---------- */
+
+#define ASD_BUSADDR_LO(__dma_handle) ((u32)(__dma_handle))
+#define ASD_BUSADDR_HI(__dma_handle) (((sizeof(dma_addr_t))==8)     \
+                                    ? ((u32)((__dma_handle) >> 32)) \
+                                    : ((u32)0))
+
+#define dev_to_asd_ha(__dev)  pci_get_drvdata(to_pci_dev(__dev))
+#define SCB_SITE_VALID(__site_no) (((__site_no) & 0xF0FF) != 0x00FF   \
+				 && ((__site_no) & 0xF0FF) > 0x001F)
+/* For each bit set in __lseq_mask, set __lseq to equal the bit
+ * position of the set bit and execute the statement following.
+ * __mc is the temporary mask, used as a mask "counter".
+ */
+#define for_each_sequencer(__lseq_mask, __mc, __lseq)                        \
+	for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+		if (((__mc) & 1))
+#define for_each_phy(__lseq_mask, __mc, __lseq)                              \
+	for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+		if (((__mc) & 1))
+
+#define PHY_ENABLED(_HA, _I) ((_HA)->hw_prof.enabled_phys & (1<<(_I)))
+
+/* ---------- DMA allocs ---------- */
+
+static inline struct asd_dma_tok *asd_dmatok_alloc(unsigned int flags)
+{
+	return kmem_cache_alloc(asd_dma_token_cache, flags);
+}
+
+static inline void asd_dmatok_free(struct asd_dma_tok *token)
+{
+	kmem_cache_free(asd_dma_token_cache, token);
+}
+
+static inline struct asd_dma_tok *asd_alloc_coherent(struct asd_ha_struct *
+						     asd_ha, size_t size,
+						     unsigned int flags)
+{
+	struct asd_dma_tok *token = asd_dmatok_alloc(flags);
+	if (token) {
+		token->size = size;
+		token->vaddr = dma_alloc_coherent(&asd_ha->pcidev->dev,
+						  token->size,
+						  &token->dma_handle,
+						  flags);
+		if (!token->vaddr) {
+			asd_dmatok_free(token);
+			token = NULL;
+		}
+	}
+	return token;
+}
+
+static inline void asd_free_coherent(struct asd_ha_struct *asd_ha,
+				     struct asd_dma_tok *token)
+{
+	if (token) {
+		dma_free_coherent(&asd_ha->pcidev->dev, token->size,
+				  token->vaddr, token->dma_handle);
+		asd_dmatok_free(token);
+	}
+}
+
+static inline void asd_init_ascb(struct asd_ha_struct *asd_ha,
+				 struct asd_ascb *ascb)
+{
+	INIT_LIST_HEAD(&ascb->list);
+	ascb->scb = ascb->dma_scb.vaddr;
+	ascb->ha = asd_ha;
+	ascb->timer.function = NULL;
+	init_timer(&ascb->timer);
+	ascb->tc_index = -1;
+	init_completion(&ascb->completion);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void asd_tc_index_release(struct asd_seq_data *seq, int index)
+{
+	seq->tc_index_array[index] = NULL;
+	clear_bit(index, seq->tc_index_bitmap);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline int asd_tc_index_get(struct asd_seq_data *seq, void *ptr)
+{
+	int index;
+
+	index = find_first_zero_bit(seq->tc_index_bitmap,
+				    seq->tc_index_bitmap_bits);
+	if (index == seq->tc_index_bitmap_bits)
+		return -1;
+
+	seq->tc_index_array[index] = ptr;
+	set_bit(index, seq->tc_index_bitmap);
+
+	return index;
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void *asd_tc_index_find(struct asd_seq_data *seq, int index)
+{
+	return seq->tc_index_array[index];
+}
+
+/**
+ * asd_ascb_free -- free a single aSCB after is has completed
+ * @ascb: pointer to the aSCB of interest
+ *
+ * This frees an aSCB after it has been executed/completed by
+ * the sequencer.
+ */
+static inline void asd_ascb_free(struct asd_ascb *ascb)
+{
+	if (ascb) {
+		struct asd_ha_struct *asd_ha = ascb->ha;
+		unsigned long flags;
+
+		BUG_ON(!list_empty(&ascb->list));
+		spin_lock_irqsave(&ascb->ha->seq.tc_index_lock, flags);
+		asd_tc_index_release(&ascb->ha->seq, ascb->tc_index);
+		spin_unlock_irqrestore(&ascb->ha->seq.tc_index_lock, flags);
+		dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
+			      ascb->dma_scb.dma_handle);
+		kmem_cache_free(asd_ascb_cache, ascb);
+	}
+}
+
+/**
+ * asd_ascb_list_free -- free a list of ascbs
+ * @ascb_list: a list of ascbs
+ *
+ * This function will free a list of ascbs allocated by asd_ascb_alloc_list.
+ * It is used when say the scb queueing function returned QUEUE_FULL,
+ * and we do not need the ascbs any more.
+ */
+static inline void asd_ascb_free_list(struct asd_ascb *ascb_list)
+{
+	LIST_HEAD(list);
+	struct list_head *n, *pos;
+
+	__list_add(&list, ascb_list->list.prev, &ascb_list->list);
+	list_for_each_safe(pos, n, &list) {
+		list_del_init(pos);
+		asd_ascb_free(list_entry(pos, struct asd_ascb, list));
+	}
+}
+
+/* ---------- Function declarations ---------- */
+
+int  asd_init_hw(struct asd_ha_struct *asd_ha);
+irqreturn_t asd_hw_isr(int irq, void *dev_id, struct pt_regs *regs);
+
+
+struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
+				     *asd_ha, int *num,
+				     unsigned int gfp_mask);
+
+int  asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+			int num);
+int  asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+			int num);
+
+int  asd_init_post_escbs(struct asd_ha_struct *asd_ha);
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc);
+void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+int  asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask);
+void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
+				      u8 subfunc);
+
+void asd_ascb_timedout(unsigned long data);
+int  asd_chip_hardrst(struct asd_ha_struct *asd_ha);
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
new file mode 100644
index 000000000000..3ec2e46f80c6
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -0,0 +1,860 @@
+/*
+ * Aic94xx SAS/SATA driver initialization.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <scsi/scsi_host.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+
+/* The format is "version.release.patchlevel" */
+#define ASD_DRIVER_VERSION "1.0.2"
+
+static int use_msi = 0;
+module_param_named(use_msi, use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi, "\n"
+	"\tEnable(1) or disable(0) using PCI MSI.\n"
+	"\tDefault: 0");
+
+static int lldd_max_execute_num = 0;
+module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
+MODULE_PARM_DESC(collector, "\n"
+	"\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
+	"\tMode.  If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
+	"\tThe aic94xx SAS LLDD supports both modes.\n"
+	"\tDefault: 0 (Direct Mode).\n");
+
+char sas_addr_str[2*SAS_ADDR_SIZE + 1] = "";
+
+static struct scsi_transport_template *aic94xx_transport_template;
+
+static struct scsi_host_template aic94xx_sht = {
+	.module			= THIS_MODULE,
+	/* .name is initialized */
+	.name			= "aic94xx",
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= sas_slave_configure,
+	.slave_destroy		= sas_slave_destroy,
+	.change_queue_depth	= sas_change_queue_depth,
+	.change_queue_type	= sas_change_queue_type,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.cmd_per_lun		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+};
+
+static int __devinit asd_map_memio(struct asd_ha_struct *asd_ha)
+{
+	int err, i;
+	struct asd_ha_addrspace *io_handle;
+
+	asd_ha->iospace = 0;
+	for (i = 0; i < 3; i += 2) {
+		io_handle = &asd_ha->io_handle[i==0?0:1];
+		io_handle->start = pci_resource_start(asd_ha->pcidev, i);
+		io_handle->len   = pci_resource_len(asd_ha->pcidev, i);
+		io_handle->flags = pci_resource_flags(asd_ha->pcidev, i);
+		err = -ENODEV;
+		if (!io_handle->start || !io_handle->len) {
+			asd_printk("MBAR%d start or length for %s is 0.\n",
+				   i==0?0:1, pci_name(asd_ha->pcidev));
+			goto Err;
+		}
+		err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME);
+		if (err) {
+			asd_printk("couldn't reserve memory region for %s\n",
+				   pci_name(asd_ha->pcidev));
+			goto Err;
+		}
+		if (io_handle->flags & IORESOURCE_CACHEABLE)
+			io_handle->addr = ioremap(io_handle->start,
+						  io_handle->len);
+		else
+			io_handle->addr = ioremap_nocache(io_handle->start,
+							  io_handle->len);
+		if (!io_handle->addr) {
+			asd_printk("couldn't map MBAR%d of %s\n", i==0?0:1,
+				   pci_name(asd_ha->pcidev));
+			goto Err_unreq;
+		}
+	}
+
+	return 0;
+Err_unreq:
+	pci_release_region(asd_ha->pcidev, i);
+Err:
+	if (i > 0) {
+		io_handle = &asd_ha->io_handle[0];
+		iounmap(io_handle->addr);
+		pci_release_region(asd_ha->pcidev, 0);
+	}
+	return err;
+}
+
+static void __devexit asd_unmap_memio(struct asd_ha_struct *asd_ha)
+{
+	struct asd_ha_addrspace *io_handle;
+
+	io_handle = &asd_ha->io_handle[1];
+	iounmap(io_handle->addr);
+	pci_release_region(asd_ha->pcidev, 2);
+
+	io_handle = &asd_ha->io_handle[0];
+	iounmap(io_handle->addr);
+	pci_release_region(asd_ha->pcidev, 0);
+}
+
+static int __devinit asd_map_ioport(struct asd_ha_struct *asd_ha)
+{
+	int i = PCI_IOBAR_OFFSET, err;
+	struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0];
+
+	asd_ha->iospace = 1;
+	io_handle->start = pci_resource_start(asd_ha->pcidev, i);
+	io_handle->len   = pci_resource_len(asd_ha->pcidev, i);
+	io_handle->flags = pci_resource_flags(asd_ha->pcidev, i);
+	io_handle->addr  = (void __iomem *) io_handle->start;
+	if (!io_handle->start || !io_handle->len) {
+		asd_printk("couldn't get IO ports for %s\n",
+			   pci_name(asd_ha->pcidev));
+		return -ENODEV;
+	}
+	err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME);
+	if (err) {
+		asd_printk("couldn't reserve io space for %s\n",
+			   pci_name(asd_ha->pcidev));
+	}
+
+	return err;
+}
+
+static void __devexit asd_unmap_ioport(struct asd_ha_struct *asd_ha)
+{
+	pci_release_region(asd_ha->pcidev, PCI_IOBAR_OFFSET);
+}
+
+static int __devinit asd_map_ha(struct asd_ha_struct *asd_ha)
+{
+	int err;
+	u16 cmd_reg;
+
+	err = pci_read_config_word(asd_ha->pcidev, PCI_COMMAND, &cmd_reg);
+	if (err) {
+		asd_printk("couldn't read command register of %s\n",
+			   pci_name(asd_ha->pcidev));
+		goto Err;
+	}
+
+	err = -ENODEV;
+	if (cmd_reg & PCI_COMMAND_MEMORY) {
+		if ((err = asd_map_memio(asd_ha)))
+			goto Err;
+	} else if (cmd_reg & PCI_COMMAND_IO) {
+		if ((err = asd_map_ioport(asd_ha)))
+			goto Err;
+		asd_printk("%s ioport mapped -- upgrade your hardware\n",
+			   pci_name(asd_ha->pcidev));
+	} else {
+		asd_printk("no proper device access to %s\n",
+			   pci_name(asd_ha->pcidev));
+		goto Err;
+	}
+
+	return 0;
+Err:
+	return err;
+}
+
+static void __devexit asd_unmap_ha(struct asd_ha_struct *asd_ha)
+{
+	if (asd_ha->iospace)
+		asd_unmap_ioport(asd_ha);
+	else
+		asd_unmap_memio(asd_ha);
+}
+
+static const char *asd_dev_rev[30] = {
+	[0] = "A0",
+	[1] = "A1",
+	[8] = "B0",
+};
+
+static int __devinit asd_common_setup(struct asd_ha_struct *asd_ha)
+{
+	int err, i;
+
+	err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID,
+				   &asd_ha->revision_id);
+	if (err) {
+		asd_printk("couldn't read REVISION ID register of %s\n",
+			   pci_name(asd_ha->pcidev));
+		goto Err;
+	}
+	err = -ENODEV;
+	if (asd_ha->revision_id < AIC9410_DEV_REV_B0) {
+		asd_printk("%s is revision %s (%X), which is not supported\n",
+			   pci_name(asd_ha->pcidev),
+			   asd_dev_rev[asd_ha->revision_id],
+			   asd_ha->revision_id);
+		goto Err;
+	}
+	/* Provide some sane default values. */
+	asd_ha->hw_prof.max_scbs = 512;
+	asd_ha->hw_prof.max_ddbs = 128;
+	asd_ha->hw_prof.num_phys = ASD_MAX_PHYS;
+	/* All phys are enabled, by default. */
+	asd_ha->hw_prof.enabled_phys = 0xFF;
+	for (i = 0; i < ASD_MAX_PHYS; i++) {
+		asd_ha->hw_prof.phy_desc[i].max_sas_lrate = PHY_LINKRATE_3;
+		asd_ha->hw_prof.phy_desc[i].min_sas_lrate = PHY_LINKRATE_1_5;
+		asd_ha->hw_prof.phy_desc[i].max_sata_lrate= PHY_LINKRATE_1_5;
+		asd_ha->hw_prof.phy_desc[i].min_sata_lrate= PHY_LINKRATE_1_5;
+	}
+
+	return 0;
+Err:
+	return err;
+}
+
+static int __devinit asd_aic9410_setup(struct asd_ha_struct *asd_ha)
+{
+	int err = asd_common_setup(asd_ha);
+
+	if (err)
+		return err;
+
+	asd_ha->hw_prof.addr_range = 8;
+	asd_ha->hw_prof.port_name_base = 0;
+	asd_ha->hw_prof.dev_name_base = 8;
+	asd_ha->hw_prof.sata_name_base = 16;
+
+	return 0;
+}
+
+static int __devinit asd_aic9405_setup(struct asd_ha_struct *asd_ha)
+{
+	int err = asd_common_setup(asd_ha);
+
+	if (err)
+		return err;
+
+	asd_ha->hw_prof.addr_range = 4;
+	asd_ha->hw_prof.port_name_base = 0;
+	asd_ha->hw_prof.dev_name_base = 4;
+	asd_ha->hw_prof.sata_name_base = 8;
+
+	return 0;
+}
+
+static ssize_t asd_show_dev_rev(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			asd_dev_rev[asd_ha->revision_id]);
+}
+static DEVICE_ATTR(revision, S_IRUGO, asd_show_dev_rev, NULL);
+
+static ssize_t asd_show_dev_bios_build(struct device *dev,
+				       struct device_attribute *attr,char *buf)
+{
+	struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+	return snprintf(buf, PAGE_SIZE, "%d\n", asd_ha->hw_prof.bios.bld);
+}
+static DEVICE_ATTR(bios_build, S_IRUGO, asd_show_dev_bios_build, NULL);
+
+static ssize_t asd_show_dev_pcba_sn(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+	return snprintf(buf, PAGE_SIZE, "%s\n", asd_ha->hw_prof.pcba_sn);
+}
+static DEVICE_ATTR(pcba_sn, S_IRUGO, asd_show_dev_pcba_sn, NULL);
+
+static void asd_create_dev_attrs(struct asd_ha_struct *asd_ha)
+{
+	device_create_file(&asd_ha->pcidev->dev, &dev_attr_revision);
+	device_create_file(&asd_ha->pcidev->dev, &dev_attr_bios_build);
+	device_create_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn);
+}
+
+static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha)
+{
+	device_remove_file(&asd_ha->pcidev->dev, &dev_attr_revision);
+	device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build);
+	device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn);
+}
+
+/* The first entry, 0, is used for dynamic ids, the rest for devices
+ * we know about.
+ */
+static struct asd_pcidev_struct {
+	const char * name;
+	int (*setup)(struct asd_ha_struct *asd_ha);
+} asd_pcidev_data[] = {
+	/* Id 0 is used for dynamic ids. */
+	{ .name  = "Adaptec AIC-94xx SAS/SATA Host Adapter",
+	  .setup = asd_aic9410_setup
+	},
+	{ .name  = "Adaptec AIC-9410W SAS/SATA Host Adapter",
+	  .setup = asd_aic9410_setup
+	},
+	{ .name  = "Adaptec AIC-9405W SAS/SATA Host Adapter",
+	  .setup = asd_aic9405_setup
+	},
+};
+
+static inline int asd_create_ha_caches(struct asd_ha_struct *asd_ha)
+{
+	asd_ha->scb_pool = dma_pool_create(ASD_DRIVER_NAME "_scb_pool",
+					   &asd_ha->pcidev->dev,
+					   sizeof(struct scb),
+					   8, 0);
+	if (!asd_ha->scb_pool) {
+		asd_printk("couldn't create scb pool\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/**
+ * asd_free_edbs -- free empty data buffers
+ * asd_ha: pointer to host adapter structure
+ */
+static inline void asd_free_edbs(struct asd_ha_struct *asd_ha)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	int i;
+
+	for (i = 0; i < seq->num_edbs; i++)
+		asd_free_coherent(asd_ha, seq->edb_arr[i]);
+	kfree(seq->edb_arr);
+	seq->edb_arr = NULL;
+}
+
+static inline void asd_free_escbs(struct asd_ha_struct *asd_ha)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	int i;
+
+	for (i = 0; i < seq->num_escbs; i++) {
+		if (!list_empty(&seq->escb_arr[i]->list))
+			list_del_init(&seq->escb_arr[i]->list);
+
+		asd_ascb_free(seq->escb_arr[i]);
+	}
+	kfree(seq->escb_arr);
+	seq->escb_arr = NULL;
+}
+
+static inline void asd_destroy_ha_caches(struct asd_ha_struct *asd_ha)
+{
+	int i;
+
+	if (asd_ha->hw_prof.ddb_ext)
+		asd_free_coherent(asd_ha, asd_ha->hw_prof.ddb_ext);
+	if (asd_ha->hw_prof.scb_ext)
+		asd_free_coherent(asd_ha, asd_ha->hw_prof.scb_ext);
+
+	if (asd_ha->hw_prof.ddb_bitmap)
+		kfree(asd_ha->hw_prof.ddb_bitmap);
+	asd_ha->hw_prof.ddb_bitmap = NULL;
+
+	for (i = 0; i < ASD_MAX_PHYS; i++) {
+		struct asd_phy *phy = &asd_ha->phys[i];
+
+		asd_free_coherent(asd_ha, phy->id_frm_tok);
+	}
+	if (asd_ha->seq.escb_arr)
+		asd_free_escbs(asd_ha);
+	if (asd_ha->seq.edb_arr)
+		asd_free_edbs(asd_ha);
+	if (asd_ha->hw_prof.ue.area) {
+		kfree(asd_ha->hw_prof.ue.area);
+		asd_ha->hw_prof.ue.area = NULL;
+	}
+	if (asd_ha->seq.tc_index_array) {
+		kfree(asd_ha->seq.tc_index_array);
+		kfree(asd_ha->seq.tc_index_bitmap);
+		asd_ha->seq.tc_index_array = NULL;
+		asd_ha->seq.tc_index_bitmap = NULL;
+	}
+	if (asd_ha->seq.actual_dl) {
+			asd_free_coherent(asd_ha, asd_ha->seq.actual_dl);
+			asd_ha->seq.actual_dl = NULL;
+			asd_ha->seq.dl = NULL;
+	}
+	if (asd_ha->seq.next_scb.vaddr) {
+		dma_pool_free(asd_ha->scb_pool, asd_ha->seq.next_scb.vaddr,
+			      asd_ha->seq.next_scb.dma_handle);
+		asd_ha->seq.next_scb.vaddr = NULL;
+	}
+	dma_pool_destroy(asd_ha->scb_pool);
+	asd_ha->scb_pool = NULL;
+}
+
+kmem_cache_t *asd_dma_token_cache;
+kmem_cache_t *asd_ascb_cache;
+
+static int asd_create_global_caches(void)
+{
+	if (!asd_dma_token_cache) {
+		asd_dma_token_cache
+			= kmem_cache_create(ASD_DRIVER_NAME "_dma_token",
+					    sizeof(struct asd_dma_tok),
+					    0,
+					    SLAB_HWCACHE_ALIGN,
+					    NULL, NULL);
+		if (!asd_dma_token_cache) {
+			asd_printk("couldn't create dma token cache\n");
+			return -ENOMEM;
+		}
+	}
+
+	if (!asd_ascb_cache) {
+		asd_ascb_cache = kmem_cache_create(ASD_DRIVER_NAME "_ascb",
+						   sizeof(struct asd_ascb),
+						   0,
+						   SLAB_HWCACHE_ALIGN,
+						   NULL, NULL);
+		if (!asd_ascb_cache) {
+			asd_printk("couldn't create ascb cache\n");
+			goto Err;
+		}
+	}
+
+	return 0;
+Err:
+	kmem_cache_destroy(asd_dma_token_cache);
+	asd_dma_token_cache = NULL;
+	return -ENOMEM;
+}
+
+static void asd_destroy_global_caches(void)
+{
+	if (asd_dma_token_cache)
+		kmem_cache_destroy(asd_dma_token_cache);
+	asd_dma_token_cache = NULL;
+
+	if (asd_ascb_cache)
+		kmem_cache_destroy(asd_ascb_cache);
+	asd_ascb_cache = NULL;
+}
+
+static int asd_register_sas_ha(struct asd_ha_struct *asd_ha)
+{
+	int i;
+	struct asd_sas_phy   **sas_phys =
+		kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_phy), GFP_KERNEL);
+	struct asd_sas_port  **sas_ports =
+		kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_port), GFP_KERNEL);
+
+	if (!sas_phys || !sas_ports) {
+		kfree(sas_phys);
+		kfree(sas_ports);
+		return -ENOMEM;
+	}
+
+	asd_ha->sas_ha.sas_ha_name = (char *) asd_ha->name;
+	asd_ha->sas_ha.lldd_module = THIS_MODULE;
+	asd_ha->sas_ha.sas_addr = &asd_ha->hw_prof.sas_addr[0];
+
+	for (i = 0; i < ASD_MAX_PHYS; i++) {
+		sas_phys[i] = &asd_ha->phys[i].sas_phy;
+		sas_ports[i] = &asd_ha->ports[i];
+	}
+
+	asd_ha->sas_ha.sas_phy = sas_phys;
+	asd_ha->sas_ha.sas_port= sas_ports;
+	asd_ha->sas_ha.num_phys= ASD_MAX_PHYS;
+
+	asd_ha->sas_ha.lldd_queue_size = asd_ha->seq.can_queue;
+
+	return sas_register_ha(&asd_ha->sas_ha);
+}
+
+static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha)
+{
+	int err;
+
+	err = sas_unregister_ha(&asd_ha->sas_ha);
+
+	sas_remove_host(asd_ha->sas_ha.core.shost);
+	scsi_remove_host(asd_ha->sas_ha.core.shost);
+	scsi_host_put(asd_ha->sas_ha.core.shost);
+
+	kfree(asd_ha->sas_ha.sas_phy);
+	kfree(asd_ha->sas_ha.sas_port);
+
+	return err;
+}
+
+static int __devinit asd_pci_probe(struct pci_dev *dev,
+				   const struct pci_device_id *id)
+{
+	struct asd_pcidev_struct *asd_dev;
+	unsigned asd_id = (unsigned) id->driver_data;
+	struct asd_ha_struct *asd_ha;
+	struct Scsi_Host *shost;
+	int err;
+
+	if (asd_id >= ARRAY_SIZE(asd_pcidev_data)) {
+		asd_printk("wrong driver_data in PCI table\n");
+		return -ENODEV;
+	}
+
+	if ((err = pci_enable_device(dev))) {
+		asd_printk("couldn't enable device %s\n", pci_name(dev));
+		return err;
+	}
+
+	pci_set_master(dev);
+
+	err = -ENOMEM;
+
+	shost = scsi_host_alloc(&aic94xx_sht, sizeof(void *));
+	if (!shost)
+		goto Err;
+
+	asd_dev = &asd_pcidev_data[asd_id];
+
+	asd_ha = kzalloc(sizeof(*asd_ha), GFP_KERNEL);
+	if (!asd_ha) {
+		asd_printk("out of memory\n");
+		goto Err;
+	}
+	asd_ha->pcidev = dev;
+	asd_ha->sas_ha.pcidev = asd_ha->pcidev;
+	asd_ha->sas_ha.lldd_ha = asd_ha;
+
+	asd_ha->name = asd_dev->name;
+	asd_printk("found %s, device %s\n", asd_ha->name, pci_name(dev));
+
+	SHOST_TO_SAS_HA(shost) = &asd_ha->sas_ha;
+	asd_ha->sas_ha.core.shost = shost;
+	shost->transportt = aic94xx_transport_template;
+	shost->max_id = ~0;
+	shost->max_lun = ~0;
+	shost->max_cmd_len = 16;
+
+	err = scsi_add_host(shost, &dev->dev);
+	if (err) {
+		scsi_host_put(shost);
+		goto Err_free;
+	}
+
+
+
+	err = asd_dev->setup(asd_ha);
+	if (err)
+		goto Err_free;
+
+	err = -ENODEV;
+	if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)
+	    && !pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK))
+		;
+	else if (!pci_set_dma_mask(dev, DMA_32BIT_MASK)
+		 && !pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK))
+		;
+	else {
+		asd_printk("no suitable DMA mask for %s\n", pci_name(dev));
+		goto Err_free;
+	}
+
+	pci_set_drvdata(dev, asd_ha);
+
+	err = asd_map_ha(asd_ha);
+	if (err)
+		goto Err_free;
+
+	err = asd_create_ha_caches(asd_ha);
+        if (err)
+		goto Err_unmap;
+
+	err = asd_init_hw(asd_ha);
+	if (err)
+		goto Err_free_cache;
+
+	asd_printk("device %s: SAS addr %llx, PCBA SN %s, %d phys, %d enabled "
+		   "phys, flash %s, BIOS %s%d\n",
+		   pci_name(dev), SAS_ADDR(asd_ha->hw_prof.sas_addr),
+		   asd_ha->hw_prof.pcba_sn, asd_ha->hw_prof.max_phys,
+		   asd_ha->hw_prof.num_phys,
+		   asd_ha->hw_prof.flash.present ? "present" : "not present",
+		   asd_ha->hw_prof.bios.present ? "build " : "not present",
+		   asd_ha->hw_prof.bios.bld);
+
+	if (use_msi)
+		pci_enable_msi(asd_ha->pcidev);
+
+	err = request_irq(asd_ha->pcidev->irq, asd_hw_isr, SA_SHIRQ,
+			  ASD_DRIVER_NAME, asd_ha);
+	if (err) {
+		asd_printk("couldn't get irq %d for %s\n",
+			   asd_ha->pcidev->irq, pci_name(asd_ha->pcidev));
+		goto Err_irq;
+	}
+	asd_enable_ints(asd_ha);
+
+	err = asd_init_post_escbs(asd_ha);
+	if (err) {
+		asd_printk("couldn't post escbs for %s\n",
+			   pci_name(asd_ha->pcidev));
+		goto Err_escbs;
+	}
+	ASD_DPRINTK("escbs posted\n");
+
+	asd_create_dev_attrs(asd_ha);
+
+	err = asd_register_sas_ha(asd_ha);
+	if (err)
+		goto Err_reg_sas;
+
+	err = asd_enable_phys(asd_ha, asd_ha->hw_prof.enabled_phys);
+	if (err) {
+		asd_printk("coudln't enable phys, err:%d\n", err);
+		goto Err_en_phys;
+	}
+	ASD_DPRINTK("enabled phys\n");
+	/* give the phy enabling interrupt event time to come in (1s
+	 * is empirically about all it takes) */
+	ssleep(1);
+	/* Wait for discovery to finish */
+	scsi_flush_work(asd_ha->sas_ha.core.shost);
+
+	return 0;
+Err_en_phys:
+	asd_unregister_sas_ha(asd_ha);
+Err_reg_sas:
+	asd_remove_dev_attrs(asd_ha);
+Err_escbs:
+	asd_disable_ints(asd_ha);
+	free_irq(dev->irq, asd_ha);
+Err_irq:
+	if (use_msi)
+		pci_disable_msi(dev);
+	asd_chip_hardrst(asd_ha);
+Err_free_cache:
+	asd_destroy_ha_caches(asd_ha);
+Err_unmap:
+	asd_unmap_ha(asd_ha);
+Err_free:
+	kfree(asd_ha);
+	scsi_remove_host(shost);
+Err:
+	pci_disable_device(dev);
+	return err;
+}
+
+static void asd_free_queues(struct asd_ha_struct *asd_ha)
+{
+	unsigned long flags;
+	LIST_HEAD(pending);
+	struct list_head *n, *pos;
+
+	spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+	asd_ha->seq.pending = 0;
+	list_splice_init(&asd_ha->seq.pend_q, &pending);
+	spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+	if (!list_empty(&pending))
+		ASD_DPRINTK("Uh-oh! Pending is not empty!\n");
+
+	list_for_each_safe(pos, n, &pending) {
+		struct asd_ascb *ascb = list_entry(pos, struct asd_ascb, list);
+		list_del_init(pos);
+		ASD_DPRINTK("freeing from pending\n");
+		asd_ascb_free(ascb);
+	}
+}
+
+static void asd_turn_off_leds(struct asd_ha_struct *asd_ha)
+{
+	u8 phy_mask = asd_ha->hw_prof.enabled_phys;
+	u8 i;
+
+	for_each_phy(phy_mask, phy_mask, i) {
+		asd_turn_led(asd_ha, i, 0);
+		asd_control_led(asd_ha, i, 0);
+	}
+}
+
+static void __devexit asd_pci_remove(struct pci_dev *dev)
+{
+	struct asd_ha_struct *asd_ha = pci_get_drvdata(dev);
+
+	if (!asd_ha)
+		return;
+
+	asd_unregister_sas_ha(asd_ha);
+
+	asd_disable_ints(asd_ha);
+
+	asd_remove_dev_attrs(asd_ha);
+
+	/* XXX more here as needed */
+
+	free_irq(dev->irq, asd_ha);
+	if (use_msi)
+		pci_disable_msi(asd_ha->pcidev);
+	asd_turn_off_leds(asd_ha);
+	asd_chip_hardrst(asd_ha);
+	asd_free_queues(asd_ha);
+	asd_destroy_ha_caches(asd_ha);
+	asd_unmap_ha(asd_ha);
+	kfree(asd_ha);
+	pci_disable_device(dev);
+	return;
+}
+
+static ssize_t asd_version_show(struct device_driver *driver, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", ASD_DRIVER_VERSION);
+}
+static DRIVER_ATTR(version, S_IRUGO, asd_version_show, NULL);
+
+static void asd_create_driver_attrs(struct device_driver *driver)
+{
+	driver_create_file(driver, &driver_attr_version);
+}
+
+static void asd_remove_driver_attrs(struct device_driver *driver)
+{
+	driver_remove_file(driver, &driver_attr_version);
+}
+
+static struct sas_domain_function_template aic94xx_transport_functions = {
+	.lldd_port_formed	= asd_update_port_links,
+
+	.lldd_dev_found		= asd_dev_found,
+	.lldd_dev_gone		= asd_dev_gone,
+
+	.lldd_execute_task	= asd_execute_task,
+
+	.lldd_abort_task	= asd_abort_task,
+	.lldd_abort_task_set	= asd_abort_task_set,
+	.lldd_clear_aca		= asd_clear_aca,
+	.lldd_clear_task_set	= asd_clear_task_set,
+	.lldd_I_T_nexus_reset	= NULL,
+	.lldd_lu_reset		= asd_lu_reset,
+	.lldd_query_task	= asd_query_task,
+
+	.lldd_clear_nexus_port	= asd_clear_nexus_port,
+	.lldd_clear_nexus_ha	= asd_clear_nexus_ha,
+
+	.lldd_control_phy	= asd_control_phy,
+};
+
+static const struct pci_device_id aic94xx_pci_table[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR10),
+	 0, 0, 1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR12),
+	 0, 0, 1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR1E),
+	 0, 0, 1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR30),
+	 0, 0, 2},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR32),
+	 0, 0, 2},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR3E),
+	 0, 0, 2},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR3F),
+	 0, 0, 2},
+	{}
+};
+
+MODULE_DEVICE_TABLE(pci, aic94xx_pci_table);
+
+static struct pci_driver aic94xx_pci_driver = {
+	.name		= ASD_DRIVER_NAME,
+	.id_table	= aic94xx_pci_table,
+	.probe		= asd_pci_probe,
+	.remove		= __devexit_p(asd_pci_remove),
+};
+
+static int __init aic94xx_init(void)
+{
+	int err;
+
+
+	asd_printk("%s version %s loaded\n", ASD_DRIVER_DESCRIPTION,
+		   ASD_DRIVER_VERSION);
+
+	err = asd_create_global_caches();
+	if (err)
+		return err;
+
+	aic94xx_transport_template =
+		sas_domain_attach_transport(&aic94xx_transport_functions);
+	if (err)
+		goto out_destroy_caches;
+
+	err = pci_register_driver(&aic94xx_pci_driver);
+	if (err)
+		goto out_release_transport;
+
+	asd_create_driver_attrs(&aic94xx_pci_driver.driver);
+
+	return err;
+
+ out_release_transport:
+	sas_release_transport(aic94xx_transport_template);
+ out_destroy_caches:
+	asd_destroy_global_caches();
+
+	return err;
+}
+
+static void __exit aic94xx_exit(void)
+{
+	asd_remove_driver_attrs(&aic94xx_pci_driver.driver);
+	pci_unregister_driver(&aic94xx_pci_driver);
+	sas_release_transport(aic94xx_transport_template);
+	asd_destroy_global_caches();
+	asd_printk("%s version %s unloaded\n", ASD_DRIVER_DESCRIPTION,
+		   ASD_DRIVER_VERSION);
+}
+
+module_init(aic94xx_init);
+module_exit(aic94xx_exit);
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION(ASD_DRIVER_DESCRIPTION);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(ASD_DRIVER_VERSION);
diff --git a/drivers/scsi/aic94xx/aic94xx_reg.c b/drivers/scsi/aic94xx/aic94xx_reg.c
new file mode 100644
index 000000000000..f210dac3203d
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_reg.c
@@ -0,0 +1,332 @@
+/*
+ * Aic94xx SAS/SATA driver register access.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+#include "aic94xx_reg.h"
+#include "aic94xx.h"
+
+/* Writing to device address space.
+ * Offset comes before value to remind that the operation of
+ * this function is *offs = val.
+ */
+static inline void asd_write_byte(struct asd_ha_struct *asd_ha,
+				  unsigned long offs, u8 val)
+{
+	if (unlikely(asd_ha->iospace))
+		outb(val,
+		     (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+	else
+		writeb(val, asd_ha->io_handle[0].addr + offs);
+	wmb();
+}
+
+static inline void asd_write_word(struct asd_ha_struct *asd_ha,
+				  unsigned long offs, u16 val)
+{
+	if (unlikely(asd_ha->iospace))
+		outw(val,
+		     (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+	else
+		writew(val, asd_ha->io_handle[0].addr + offs);
+	wmb();
+}
+
+static inline void asd_write_dword(struct asd_ha_struct *asd_ha,
+				   unsigned long offs, u32 val)
+{
+	if (unlikely(asd_ha->iospace))
+		outl(val,
+		     (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+	else
+		writel(val, asd_ha->io_handle[0].addr + offs);
+	wmb();
+}
+
+/* Reading from device address space.
+ */
+static inline u8 asd_read_byte(struct asd_ha_struct *asd_ha,
+			       unsigned long offs)
+{
+	u8 val;
+	if (unlikely(asd_ha->iospace))
+		val = inb((unsigned long) asd_ha->io_handle[0].addr
+			  + (offs & 0xFF));
+	else
+		val = readb(asd_ha->io_handle[0].addr + offs);
+	rmb();
+	return val;
+}
+
+static inline u16 asd_read_word(struct asd_ha_struct *asd_ha,
+				unsigned long offs)
+{
+	u16 val;
+	if (unlikely(asd_ha->iospace))
+		val = inw((unsigned long)asd_ha->io_handle[0].addr
+			  + (offs & 0xFF));
+	else
+		val = readw(asd_ha->io_handle[0].addr + offs);
+	rmb();
+	return val;
+}
+
+static inline u32 asd_read_dword(struct asd_ha_struct *asd_ha,
+				 unsigned long offs)
+{
+	u32 val;
+	if (unlikely(asd_ha->iospace))
+		val = inl((unsigned long) asd_ha->io_handle[0].addr
+			  + (offs & 0xFF));
+	else
+		val = readl(asd_ha->io_handle[0].addr + offs);
+	rmb();
+	return val;
+}
+
+static inline u32 asd_mem_offs_swa(void)
+{
+	return 0;
+}
+
+static inline u32 asd_mem_offs_swc(void)
+{
+	return asd_mem_offs_swa() + MBAR0_SWA_SIZE;
+}
+
+static inline u32 asd_mem_offs_swb(void)
+{
+	return asd_mem_offs_swc() + MBAR0_SWC_SIZE + 0x20;
+}
+
+/* We know that the register wanted is in the range
+ * of the sliding window.
+ */
+#define ASD_READ_SW(ww, type, ord)                                     \
+static inline type asd_read_##ww##_##ord (struct asd_ha_struct *asd_ha,\
+					  u32 reg)                     \
+{                                                                      \
+	struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0];    \
+	u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\
+	return asd_read_##ord (asd_ha, (unsigned long) map_offs);      \
+}
+
+#define ASD_WRITE_SW(ww, type, ord)                                    \
+static inline void asd_write_##ww##_##ord (struct asd_ha_struct *asd_ha,\
+				  u32 reg, type val)                   \
+{                                                                      \
+	struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0];    \
+	u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\
+	asd_write_##ord (asd_ha, (unsigned long) map_offs, val);       \
+}
+
+ASD_READ_SW(swa, u8,  byte);
+ASD_READ_SW(swa, u16, word);
+ASD_READ_SW(swa, u32, dword);
+
+ASD_READ_SW(swb, u8,  byte);
+ASD_READ_SW(swb, u16, word);
+ASD_READ_SW(swb, u32, dword);
+
+ASD_READ_SW(swc, u8,  byte);
+ASD_READ_SW(swc, u16, word);
+ASD_READ_SW(swc, u32, dword);
+
+ASD_WRITE_SW(swa, u8,  byte);
+ASD_WRITE_SW(swa, u16, word);
+ASD_WRITE_SW(swa, u32, dword);
+
+ASD_WRITE_SW(swb, u8,  byte);
+ASD_WRITE_SW(swb, u16, word);
+ASD_WRITE_SW(swb, u32, dword);
+
+ASD_WRITE_SW(swc, u8,  byte);
+ASD_WRITE_SW(swc, u16, word);
+ASD_WRITE_SW(swc, u32, dword);
+
+/*
+ * A word about sliding windows:
+ * MBAR0 is divided into sliding windows A, C and B, in that order.
+ * SWA starts at offset 0 of MBAR0, up to 0x57, with size 0x58 bytes.
+ * SWC starts at offset 0x58 of MBAR0, up to 0x60, with size 0x8 bytes.
+ * From 0x60 to 0x7F, we have a copy of PCI config space 0x60-0x7F.
+ * SWB starts at offset 0x80 of MBAR0 and extends to the end of MBAR0.
+ * See asd_init_sw() in aic94xx_hwi.c
+ *
+ * We map the most common registers we'd access of the internal 4GB
+ * host adapter memory space.  If a register/internal memory location
+ * is wanted which is not mapped, we slide SWB, by paging it,
+ * see asd_move_swb() in aic94xx_reg.c.
+ */
+
+/**
+ * asd_move_swb -- move sliding window B
+ * @asd_ha: pointer to host adapter structure
+ * @reg: register desired to be within range of the new window
+ */
+static inline void asd_move_swb(struct asd_ha_struct *asd_ha, u32 reg)
+{
+	u32 base = reg & ~(MBAR0_SWB_SIZE-1);
+	pci_write_config_dword(asd_ha->pcidev, PCI_CONF_MBAR0_SWB, base);
+	asd_ha->io_handle[0].swb_base = base;
+}
+
+static void __asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val)
+{
+	struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
+	BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
+	if (io_handle->swa_base <= reg
+	    && reg < io_handle->swa_base + MBAR0_SWA_SIZE)
+		asd_write_swa_byte (asd_ha, reg,val);
+	else if (io_handle->swb_base <= reg
+		 && reg < io_handle->swb_base + MBAR0_SWB_SIZE)
+		asd_write_swb_byte (asd_ha, reg, val);
+	else if (io_handle->swc_base <= reg
+		 && reg < io_handle->swc_base + MBAR0_SWC_SIZE)
+		asd_write_swc_byte (asd_ha, reg, val);
+	else {
+		/* Ok, we have to move SWB */
+		asd_move_swb(asd_ha, reg);
+		asd_write_swb_byte (asd_ha, reg, val);
+	}
+}
+
+#define ASD_WRITE_REG(type, ord)                                  \
+void asd_write_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg, type val)\
+{                                                                 \
+	struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
+	unsigned long flags;                                      \
+	BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);         \
+	spin_lock_irqsave(&asd_ha->iolock, flags);                \
+	if (io_handle->swa_base <= reg                            \
+	    && reg < io_handle->swa_base + MBAR0_SWA_SIZE)        \
+		asd_write_swa_##ord (asd_ha, reg,val);            \
+	else if (io_handle->swb_base <= reg                       \
+		 && reg < io_handle->swb_base + MBAR0_SWB_SIZE)   \
+		asd_write_swb_##ord (asd_ha, reg, val);           \
+	else if (io_handle->swc_base <= reg                       \
+		 && reg < io_handle->swc_base + MBAR0_SWC_SIZE)   \
+		asd_write_swc_##ord (asd_ha, reg, val);           \
+	else {                                                    \
+		/* Ok, we have to move SWB */                     \
+		asd_move_swb(asd_ha, reg);                        \
+		asd_write_swb_##ord (asd_ha, reg, val);           \
+	}                                                         \
+	spin_unlock_irqrestore(&asd_ha->iolock, flags);           \
+}
+
+ASD_WRITE_REG(u8, byte);
+ASD_WRITE_REG(u16,word);
+ASD_WRITE_REG(u32,dword);
+
+static u8 __asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg)
+{
+	struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
+	u8 val;
+	BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
+	if (io_handle->swa_base <= reg
+	    && reg < io_handle->swa_base + MBAR0_SWA_SIZE)
+		val = asd_read_swa_byte (asd_ha, reg);
+	else if (io_handle->swb_base <= reg
+		 && reg < io_handle->swb_base + MBAR0_SWB_SIZE)
+		val = asd_read_swb_byte (asd_ha, reg);
+	else if (io_handle->swc_base <= reg
+		 && reg < io_handle->swc_base + MBAR0_SWC_SIZE)
+		val = asd_read_swc_byte (asd_ha, reg);
+	else {
+		/* Ok, we have to move SWB */
+		asd_move_swb(asd_ha, reg);
+		val = asd_read_swb_byte (asd_ha, reg);
+	}
+	return val;
+}
+
+#define ASD_READ_REG(type, ord)                                   \
+type asd_read_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg)   \
+{                                                                 \
+	struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
+	type val;                                                 \
+	unsigned long flags;                                      \
+	BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);         \
+	spin_lock_irqsave(&asd_ha->iolock, flags);                \
+	if (io_handle->swa_base <= reg                            \
+	    && reg < io_handle->swa_base + MBAR0_SWA_SIZE)        \
+		val = asd_read_swa_##ord (asd_ha, reg);           \
+	else if (io_handle->swb_base <= reg                       \
+		 && reg < io_handle->swb_base + MBAR0_SWB_SIZE)   \
+		val = asd_read_swb_##ord (asd_ha, reg);           \
+	else if (io_handle->swc_base <= reg                       \
+		 && reg < io_handle->swc_base + MBAR0_SWC_SIZE)   \
+		val = asd_read_swc_##ord (asd_ha, reg);           \
+	else {                                                    \
+		/* Ok, we have to move SWB */                     \
+		asd_move_swb(asd_ha, reg);                        \
+		val = asd_read_swb_##ord (asd_ha, reg);           \
+	}                                                         \
+	spin_unlock_irqrestore(&asd_ha->iolock, flags);           \
+	return val;                                               \
+}
+
+ASD_READ_REG(u8, byte);
+ASD_READ_REG(u16,word);
+ASD_READ_REG(u32,dword);
+
+/**
+ * asd_read_reg_string -- read a string of bytes from io space memory
+ * @asd_ha: pointer to host adapter structure
+ * @dst: pointer to a destination buffer where data will be written to
+ * @offs: start offset (register) to read from
+ * @count: number of bytes to read
+ */
+void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst,
+			 u32 offs, int count)
+{
+	u8 *p = dst;
+	unsigned long flags;
+
+	spin_lock_irqsave(&asd_ha->iolock, flags);
+	for ( ; count > 0; count--, offs++, p++)
+		*p = __asd_read_reg_byte(asd_ha, offs);
+	spin_unlock_irqrestore(&asd_ha->iolock, flags);
+}
+
+/**
+ * asd_write_reg_string -- write a string of bytes to io space memory
+ * @asd_ha: pointer to host adapter structure
+ * @src: pointer to source buffer where data will be read from
+ * @offs: start offset (register) to write to
+ * @count: number of bytes to write
+ */
+void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src,
+			  u32 offs, int count)
+{
+	u8 *p = src;
+	unsigned long flags;
+
+	spin_lock_irqsave(&asd_ha->iolock, flags);
+	for ( ; count > 0; count--, offs++, p++)
+		__asd_write_reg_byte(asd_ha, offs, *p);
+	spin_unlock_irqrestore(&asd_ha->iolock, flags);
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_reg.h b/drivers/scsi/aic94xx/aic94xx_reg.h
new file mode 100644
index 000000000000..2279307fd27e
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_reg.h
@@ -0,0 +1,302 @@
+/*
+ * Aic94xx SAS/SATA driver hardware registers definitions.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef _AIC94XX_REG_H_
+#define _AIC94XX_REG_H_
+
+#include <asm/io.h>
+#include "aic94xx_hwi.h"
+
+/* Values */
+#define AIC9410_DEV_REV_B0            0x8
+
+/* MBAR0, SWA, SWB, SWC, internal memory space addresses */
+#define REG_BASE_ADDR                 0xB8000000
+#define REG_BASE_ADDR_CSEQCIO         0xB8002000
+#define REG_BASE_ADDR_EXSI            0xB8042800
+
+#define MBAR0_SWA_SIZE                0x58
+extern  u32    MBAR0_SWB_SIZE;
+#define MBAR0_SWC_SIZE                0x8
+
+/* MBAR1, points to On Chip Memory */
+#define OCM_BASE_ADDR                 0xA0000000
+#define OCM_MAX_SIZE                  0x20000
+
+/* Smallest address possible to reference */
+#define ALL_BASE_ADDR                 OCM_BASE_ADDR
+
+/* PCI configuration space registers */
+#define PCI_IOBAR_OFFSET              4
+
+#define PCI_CONF_MBAR1                0x6C
+#define PCI_CONF_MBAR0_SWA            0x70
+#define PCI_CONF_MBAR0_SWB            0x74
+#define PCI_CONF_MBAR0_SWC            0x78
+#define PCI_CONF_MBAR_KEY             0x7C
+#define PCI_CONF_FLSH_BAR             0xB8
+
+#include "aic94xx_reg_def.h"
+
+u8  asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg);
+u16 asd_read_reg_word(struct asd_ha_struct *asd_ha, u32 reg);
+u32 asd_read_reg_dword(struct asd_ha_struct *asd_ha, u32 reg);
+
+void asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val);
+void asd_write_reg_word(struct asd_ha_struct *asd_ha, u32 reg, u16 val);
+void asd_write_reg_dword(struct asd_ha_struct *asd_ha, u32 reg, u32 val);
+
+void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst,
+			 u32 offs, int count);
+void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src,
+			  u32 offs, int count);
+
+#define ASD_READ_OCM(type, ord, S)                                    \
+static inline type asd_read_ocm_##ord (struct asd_ha_struct *asd_ha,  \
+					 u32 offs)                    \
+{                                                                     \
+	struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[1];   \
+	type val = read##S (io_handle->addr + (unsigned long) offs);  \
+	rmb();                                                        \
+	return val;                                                   \
+}
+
+ASD_READ_OCM(u8, byte, b);
+ASD_READ_OCM(u16,word, w);
+ASD_READ_OCM(u32,dword,l);
+
+#define ASD_WRITE_OCM(type, ord, S)                                    \
+static inline void asd_write_ocm_##ord (struct asd_ha_struct *asd_ha,  \
+					 u32 offs, type val)          \
+{                                                                     \
+	struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[1];   \
+	write##S (val, io_handle->addr + (unsigned long) offs);       \
+	return;                                                       \
+}
+
+ASD_WRITE_OCM(u8, byte, b);
+ASD_WRITE_OCM(u16,word, w);
+ASD_WRITE_OCM(u32,dword,l);
+
+#define ASD_DDBSITE_READ(type, ord)                                        \
+static inline type asd_ddbsite_read_##ord (struct asd_ha_struct *asd_ha,   \
+					   u16 ddb_site_no,                \
+					   u16 offs)                       \
+{                                                                          \
+	asd_write_reg_word(asd_ha, ALTCIOADR, MnDDB_SITE + offs);          \
+	asd_write_reg_word(asd_ha, ADDBPTR, ddb_site_no);                  \
+	return asd_read_reg_##ord (asd_ha, CTXACCESS);                     \
+}
+
+ASD_DDBSITE_READ(u32, dword);
+ASD_DDBSITE_READ(u16, word);
+
+static inline u8 asd_ddbsite_read_byte(struct asd_ha_struct *asd_ha,
+				       u16 ddb_site_no,
+				       u16 offs)
+{
+	if (offs & 1)
+		return asd_ddbsite_read_word(asd_ha, ddb_site_no,
+					     offs & ~1) >> 8;
+	else
+		return asd_ddbsite_read_word(asd_ha, ddb_site_no,
+					     offs) & 0xFF;
+}
+
+
+#define ASD_DDBSITE_WRITE(type, ord)                                       \
+static inline void asd_ddbsite_write_##ord (struct asd_ha_struct *asd_ha,  \
+					u16 ddb_site_no,                   \
+					u16 offs, type val)                \
+{                                                                          \
+	asd_write_reg_word(asd_ha, ALTCIOADR, MnDDB_SITE + offs);          \
+	asd_write_reg_word(asd_ha, ADDBPTR, ddb_site_no);                  \
+	asd_write_reg_##ord (asd_ha, CTXACCESS, val);                      \
+}
+
+ASD_DDBSITE_WRITE(u32, dword);
+ASD_DDBSITE_WRITE(u16, word);
+
+static inline void asd_ddbsite_write_byte(struct asd_ha_struct *asd_ha,
+					  u16 ddb_site_no,
+					  u16 offs, u8 val)
+{
+	u16 base = offs & ~1;
+	u16 rval = asd_ddbsite_read_word(asd_ha, ddb_site_no, base);
+	if (offs & 1)
+		rval = (val << 8) | (rval & 0xFF);
+	else
+		rval = (rval & 0xFF00) | val;
+	asd_ddbsite_write_word(asd_ha, ddb_site_no, base, rval);
+}
+
+
+#define ASD_SCBSITE_READ(type, ord)                                        \
+static inline type asd_scbsite_read_##ord (struct asd_ha_struct *asd_ha,   \
+					   u16 scb_site_no,                \
+					   u16 offs)                       \
+{                                                                          \
+	asd_write_reg_word(asd_ha, ALTCIOADR, MnSCB_SITE + offs);          \
+	asd_write_reg_word(asd_ha, ASCBPTR, scb_site_no);                  \
+	return asd_read_reg_##ord (asd_ha, CTXACCESS);                     \
+}
+
+ASD_SCBSITE_READ(u32, dword);
+ASD_SCBSITE_READ(u16, word);
+
+static inline u8 asd_scbsite_read_byte(struct asd_ha_struct *asd_ha,
+				       u16 scb_site_no,
+				       u16 offs)
+{
+	if (offs & 1)
+		return asd_scbsite_read_word(asd_ha, scb_site_no,
+					     offs & ~1) >> 8;
+	else
+		return asd_scbsite_read_word(asd_ha, scb_site_no,
+					     offs) & 0xFF;
+}
+
+
+#define ASD_SCBSITE_WRITE(type, ord)                                       \
+static inline void asd_scbsite_write_##ord (struct asd_ha_struct *asd_ha,  \
+					u16 scb_site_no,                   \
+					u16 offs, type val)                \
+{                                                                          \
+	asd_write_reg_word(asd_ha, ALTCIOADR, MnSCB_SITE + offs);          \
+	asd_write_reg_word(asd_ha, ASCBPTR, scb_site_no);                  \
+	asd_write_reg_##ord (asd_ha, CTXACCESS, val);                      \
+}
+
+ASD_SCBSITE_WRITE(u32, dword);
+ASD_SCBSITE_WRITE(u16, word);
+
+static inline void asd_scbsite_write_byte(struct asd_ha_struct *asd_ha,
+					  u16 scb_site_no,
+					  u16 offs, u8 val)
+{
+	u16 base = offs & ~1;
+	u16 rval = asd_scbsite_read_word(asd_ha, scb_site_no, base);
+	if (offs & 1)
+		rval = (val << 8) | (rval & 0xFF);
+	else
+		rval = (rval & 0xFF00) | val;
+	asd_scbsite_write_word(asd_ha, scb_site_no, base, rval);
+}
+
+/**
+ * asd_ddbsite_update_word -- atomically update a word in a ddb site
+ * @asd_ha: pointer to host adapter structure
+ * @ddb_site_no: the DDB site number
+ * @offs: the offset into the DDB
+ * @oldval: old value found in that offset
+ * @newval: the new value to replace it
+ *
+ * This function is used when the sequencers are running and we need to
+ * update a DDB site atomically without expensive pausing and upausing
+ * of the sequencers and accessing the DDB site through the CIO bus.
+ *
+ * Return 0 on success; -EFAULT on parity error; -EAGAIN if the old value
+ * is different than the current value at that offset.
+ */
+static inline int asd_ddbsite_update_word(struct asd_ha_struct *asd_ha,
+					  u16 ddb_site_no, u16 offs,
+					  u16 oldval, u16 newval)
+{
+	u8  done;
+	u16 oval = asd_ddbsite_read_word(asd_ha, ddb_site_no, offs);
+	if (oval != oldval)
+		return -EAGAIN;
+	asd_write_reg_word(asd_ha, AOLDDATA, oldval);
+	asd_write_reg_word(asd_ha, ANEWDATA, newval);
+	do {
+		done = asd_read_reg_byte(asd_ha, ATOMICSTATCTL);
+	} while (!(done & ATOMICDONE));
+	if (done & ATOMICERR)
+		return -EFAULT;	  /* parity error */
+	else if (done & ATOMICWIN)
+		return 0;	  /* success */
+	else
+		return -EAGAIN;	  /* oldval different than current value */
+}
+
+static inline int asd_ddbsite_update_byte(struct asd_ha_struct *asd_ha,
+					  u16 ddb_site_no, u16 offs,
+					  u8 _oldval, u8 _newval)
+{
+	u16 base = offs & ~1;
+	u16 oval;
+	u16 nval = asd_ddbsite_read_word(asd_ha, ddb_site_no, base);
+	if (offs & 1) {
+		if ((nval >> 8) != _oldval)
+			return -EAGAIN;
+		nval = (_newval << 8) | (nval & 0xFF);
+		oval = (_oldval << 8) | (nval & 0xFF);
+	} else {
+		if ((nval & 0xFF) != _oldval)
+			return -EAGAIN;
+		nval = (nval & 0xFF00) | _newval;
+		oval = (nval & 0xFF00) | _oldval;
+	}
+	return asd_ddbsite_update_word(asd_ha, ddb_site_no, base, oval, nval);
+}
+
+static inline void asd_write_reg_addr(struct asd_ha_struct *asd_ha, u32 reg,
+				      dma_addr_t dma_handle)
+{
+	asd_write_reg_dword(asd_ha, reg,   ASD_BUSADDR_LO(dma_handle));
+	asd_write_reg_dword(asd_ha, reg+4, ASD_BUSADDR_HI(dma_handle));
+}
+
+static inline u32 asd_get_cmdctx_size(struct asd_ha_struct *asd_ha)
+{
+	/* DCHREVISION returns 0, possibly broken */
+	u32 ctxmemsize = asd_read_reg_dword(asd_ha, LmMnINT(0,0)) & CTXMEMSIZE;
+	return ctxmemsize ? 65536 : 32768;
+}
+
+static inline u32 asd_get_devctx_size(struct asd_ha_struct *asd_ha)
+{
+	u32 ctxmemsize = asd_read_reg_dword(asd_ha, LmMnINT(0,0)) & CTXMEMSIZE;
+	return ctxmemsize ? 8192 : 4096;
+}
+
+static inline void asd_disable_ints(struct asd_ha_struct *asd_ha)
+{
+	asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
+}
+
+static inline void asd_enable_ints(struct asd_ha_struct *asd_ha)
+{
+	/* Enable COM SAS interrupt on errors, COMSTAT */
+	asd_write_reg_dword(asd_ha, COMSTATEN,
+			    EN_CSBUFPERR | EN_CSERR | EN_OVLYERR);
+	/* Enable DCH SAS CFIFTOERR */
+	asd_write_reg_dword(asd_ha, DCHSTATUS, EN_CFIFTOERR);
+	/* Enable Host Device interrupts */
+	asd_write_reg_dword(asd_ha, CHIMINTEN, SET_CHIMINTEN);
+}
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
new file mode 100644
index 000000000000..b79f45f3ad47
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -0,0 +1,2398 @@
+/*
+ * Aic94xx SAS/SATA driver hardware registers defintions.
+ *
+ * Copyright (C) 2004 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * Luben Tuikov: Some register value updates to make it work with the window
+ * agnostic register r/w functions.  Some register corrections, sizes,
+ * etc.
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_reg_def.h#27 $
+ *
+ */
+
+#ifndef _ADP94XX_REG_DEF_H_
+#define _ADP94XX_REG_DEF_H_
+
+/*
+ * Common definitions.
+ */
+#define CSEQ_MODE_PAGE_SIZE	0x200		/* CSEQ mode page size */
+#define LmSEQ_MODE_PAGE_SIZE	0x200		/* LmSEQ mode page size */
+#define LmSEQ_HOST_REG_SIZE   	0x4000		/* LmSEQ Host Register size */
+
+/********************* COM_SAS registers definition *************************/
+
+/* The base is REG_BASE_ADDR, defined in aic94xx_reg.h.
+ */
+
+/*
+ * CHIM Registers, Address Range : (0x00-0xFF)
+ */
+#define COMBIST		(REG_BASE_ADDR + 0x00)
+
+/* bits 31:24 */
+#define		L7BLKRST		0x80000000
+#define		L6BLKRST		0x40000000
+#define		L5BLKRST		0x20000000
+#define		L4BLKRST		0x10000000
+#define		L3BLKRST		0x08000000
+#define		L2BLKRST		0x04000000
+#define		L1BLKRST		0x02000000
+#define		L0BLKRST		0x01000000
+#define		LmBLKRST		0xFF000000
+#define LmBLKRST_COMBIST(phyid)		(1 << (24 + phyid))
+
+#define		OCMBLKRST		0x00400000
+#define		CTXMEMBLKRST		0x00200000
+#define		CSEQBLKRST		0x00100000
+#define		EXSIBLKRST		0x00040000
+#define		DPIBLKRST		0x00020000
+#define		DFIFBLKRST		0x00010000
+#define		HARDRST			0x00000200
+#define		COMBLKRST		0x00000100
+#define		FRCDFPERR		0x00000080
+#define		FRCCIOPERR		0x00000020
+#define		FRCBISTERR		0x00000010
+#define		COMBISTEN		0x00000004
+#define		COMBISTDONE		0x00000002	/* ro */
+#define 	COMBISTFAIL		0x00000001	/* ro */
+
+#define COMSTAT		(REG_BASE_ADDR + 0x04)
+
+#define		REQMBXREAD		0x00000040
+#define 	RSPMBXAVAIL		0x00000020
+#define 	CSBUFPERR		0x00000008
+#define		OVLYERR			0x00000004
+#define 	CSERR			0x00000002
+#define		OVLYDMADONE		0x00000001
+
+#define		COMSTAT_MASK		(REQMBXREAD | RSPMBXAVAIL | \
+					 CSBUFPERR | OVLYERR | CSERR |\
+					 OVLYDMADONE)
+
+#define COMSTATEN	(REG_BASE_ADDR + 0x08)
+
+#define		EN_REQMBXREAD		0x00000040
+#define		EN_RSPMBXAVAIL		0x00000020
+#define		EN_CSBUFPERR		0x00000008
+#define		EN_OVLYERR		0x00000004
+#define		EN_CSERR		0x00000002
+#define		EN_OVLYDONE		0x00000001
+
+#define SCBPRO		(REG_BASE_ADDR + 0x0C)
+
+#define		SCBCONS_MASK		0xFFFF0000
+#define		SCBPRO_MASK		0x0000FFFF
+
+#define CHIMREQMBX	(REG_BASE_ADDR + 0x10)
+
+#define CHIMRSPMBX	(REG_BASE_ADDR + 0x14)
+
+#define CHIMINT		(REG_BASE_ADDR + 0x18)
+
+#define		EXT_INT0		0x00000800
+#define		EXT_INT1		0x00000400
+#define		PORRSTDET		0x00000200
+#define		HARDRSTDET		0x00000100
+#define		DLAVAILQ		0x00000080	/* ro */
+#define		HOSTERR			0x00000040
+#define		INITERR			0x00000020
+#define		DEVINT			0x00000010
+#define		COMINT			0x00000008
+#define		DEVTIMER2		0x00000004
+#define		DEVTIMER1		0x00000002
+#define		DLAVAIL			0x00000001
+
+#define		CHIMINT_MASK		(HOSTERR | INITERR | DEVINT | COMINT |\
+					 DEVTIMER2 | DEVTIMER1 | DLAVAIL)
+
+#define 	DEVEXCEPT_MASK		(HOSTERR | INITERR | DEVINT | COMINT)
+
+#define CHIMINTEN	(REG_BASE_ADDR + 0x1C)
+
+#define		RST_EN_EXT_INT1		0x01000000
+#define		RST_EN_EXT_INT0		0x00800000
+#define		RST_EN_HOSTERR		0x00400000
+#define		RST_EN_INITERR		0x00200000
+#define		RST_EN_DEVINT		0x00100000
+#define		RST_EN_COMINT		0x00080000
+#define		RST_EN_DEVTIMER2	0x00040000
+#define		RST_EN_DEVTIMER1	0x00020000
+#define		RST_EN_DLAVAIL		0x00010000
+#define		SET_EN_EXT_INT1		0x00000100
+#define		SET_EN_EXT_INT0		0x00000080
+#define		SET_EN_HOSTERR		0x00000040
+#define		SET_EN_INITERR		0x00000020
+#define		SET_EN_DEVINT		0x00000010
+#define		SET_EN_COMINT		0x00000008
+#define		SET_EN_DEVTIMER2	0x00000004
+#define		SET_EN_DEVTIMER1	0x00000002
+#define		SET_EN_DLAVAIL		0x00000001
+
+#define		RST_CHIMINTEN		(RST_EN_HOSTERR | RST_EN_INITERR | \
+					 RST_EN_DEVINT | RST_EN_COMINT | \
+					 RST_EN_DEVTIMER2 | RST_EN_DEVTIMER1 |\
+					 RST_EN_DLAVAIL)
+
+#define		SET_CHIMINTEN		(SET_EN_HOSTERR | SET_EN_INITERR |\
+					 SET_EN_DEVINT | SET_EN_COMINT |\
+					 SET_EN_DLAVAIL)
+
+#define OVLYDMACTL	(REG_BASE_ADDR + 0x20)
+
+#define		OVLYADR_MASK		0x07FF0000
+#define		OVLYLSEQ_MASK		0x0000FF00
+#define		OVLYCSEQ		0x00000080
+#define		OVLYHALTERR		0x00000040
+#define		PIOCMODE		0x00000020
+#define		RESETOVLYDMA		0x00000008	/* wo */
+#define		STARTOVLYDMA		0x00000004
+#define		STOPOVLYDMA		0x00000002	/* wo */
+#define		OVLYDMAACT		0x00000001	/* ro */
+
+#define OVLYDMACNT	(REG_BASE_ADDR + 0x24)
+
+#define		OVLYDOMAIN1		0x20000000	/* ro */
+#define		OVLYDOMAIN0		0x10000000
+#define		OVLYBUFADR_MASK		0x007F0000
+#define		OVLYDMACNT_MASK		0x00003FFF
+
+#define OVLYDMAADR	(REG_BASE_ADDR + 0x28)
+
+#define DMAERR		(REG_BASE_ADDR + 0x30)
+
+#define		OVLYERRSTAT_MASK	0x0000FF00	/* ro */
+#define		CSERRSTAT_MASK		0x000000FF	/* ro */
+
+#define SPIODATA	(REG_BASE_ADDR + 0x34)
+
+/* 0x38 - 0x3C are reserved  */
+
+#define T1CNTRLR	(REG_BASE_ADDR + 0x40)
+
+#define		T1DONE			0x00010000	/* ro */
+#define		TIMER64			0x00000400
+#define		T1ENABLE		0x00000200
+#define		T1RELOAD		0x00000100
+#define		T1PRESCALER_MASK	0x00000003
+
+#define	T1CMPR		(REG_BASE_ADDR + 0x44)
+
+#define T1CNTR		(REG_BASE_ADDR + 0x48)
+
+#define T2CNTRLR	(REG_BASE_ADDR + 0x4C)
+
+#define		T2DONE			0x00010000	/* ro */
+#define		T2ENABLE		0x00000200
+#define		T2RELOAD		0x00000100
+#define		T2PRESCALER_MASK	0x00000003
+
+#define	T2CMPR		(REG_BASE_ADDR + 0x50)
+
+#define T2CNTR		(REG_BASE_ADDR + 0x54)
+
+/* 0x58h - 0xFCh are reserved */
+
+/*
+ * DCH_SAS Registers, Address Range : (0x800-0xFFF)
+ */
+#define CMDCTXBASE	(REG_BASE_ADDR + 0x800)
+
+#define DEVCTXBASE	(REG_BASE_ADDR + 0x808)
+
+#define CTXDOMAIN	(REG_BASE_ADDR + 0x810)
+
+#define		DEVCTXDOMAIN1		0x00000008	/* ro */
+#define		DEVCTXDOMAIN0		0x00000004
+#define		CMDCTXDOMAIN1		0x00000002	/* ro */
+#define		CMDCTXDOMAIN0		0x00000001
+
+#define DCHCTL		(REG_BASE_ADDR + 0x814)
+
+#define		OCMBISTREPAIR		0x00080000
+#define		OCMBISTEN		0x00040000
+#define		OCMBISTDN		0x00020000	/* ro */
+#define		OCMBISTFAIL		0x00010000	/* ro */
+#define		DDBBISTEN		0x00004000
+#define		DDBBISTDN		0x00002000	/* ro */
+#define		DDBBISTFAIL		0x00001000	/* ro */
+#define		SCBBISTEN		0x00000400
+#define		SCBBISTDN		0x00000200	/* ro */
+#define		SCBBISTFAIL		0x00000100	/* ro */
+
+#define		MEMSEL_MASK		0x000000E0
+#define		MEMSEL_CCM_LSEQ		0x00000000
+#define		MEMSEL_CCM_IOP		0x00000020
+#define		MEMSEL_CCM_SASCTL	0x00000040
+#define		MEMSEL_DCM_LSEQ		0x00000060
+#define		MEMSEL_DCM_IOP		0x00000080
+#define		MEMSEL_OCM		0x000000A0
+
+#define		FRCERR			0x00000010
+#define		AUTORLS			0x00000001
+
+#define DCHREVISION	(REG_BASE_ADDR + 0x818)
+
+#define		DCHREVISION_MASK	0x000000FF
+
+#define DCHSTATUS	(REG_BASE_ADDR + 0x81C)
+
+#define		EN_CFIFTOERR		0x00020000
+#define		CFIFTOERR		0x00000200
+#define		CSEQINT			0x00000100	/* ro */
+#define		LSEQ7INT		0x00000080	/* ro */
+#define		LSEQ6INT		0x00000040	/* ro */
+#define		LSEQ5INT		0x00000020	/* ro */
+#define		LSEQ4INT		0x00000010	/* ro */
+#define		LSEQ3INT		0x00000008	/* ro */
+#define		LSEQ2INT		0x00000004	/* ro */
+#define		LSEQ1INT		0x00000002	/* ro */
+#define		LSEQ0INT		0x00000001	/* ro */
+
+#define		LSEQINT_MASK		(LSEQ7INT | LSEQ6INT | LSEQ5INT |\
+					 LSEQ4INT | LSEQ3INT | LSEQ2INT	|\
+					 LSEQ1INT | LSEQ0INT)
+
+#define DCHDFIFDEBUG	(REG_BASE_ADDR + 0x820)
+#define		ENFAIRMST		0x00FF0000
+#define		DISWRMST9		0x00000200
+#define		DISWRMST8		0x00000100
+#define		DISRDMST		0x000000FF
+
+#define ATOMICSTATCTL	(REG_BASE_ADDR + 0x824)
+/* 8 bit wide */
+#define		AUTOINC			0x80
+#define		ATOMICERR		0x04
+#define		ATOMICWIN		0x02
+#define		ATOMICDONE		0x01
+
+
+#define ALTCIOADR	(REG_BASE_ADDR + 0x828)
+/* 16 bit; bits 8:0 define CIO addr space of CSEQ */
+
+#define ASCBPTR		(REG_BASE_ADDR + 0x82C)
+/* 16 bit wide */
+
+#define ADDBPTR		(REG_BASE_ADDR + 0x82E)
+/* 16 bit wide */
+
+#define ANEWDATA	(REG_BASE_ADDR + 0x830)
+/* 16 bit */
+
+#define AOLDDATA	(REG_BASE_ADDR + 0x834)
+/* 16 bit */
+
+#define CTXACCESS	(REG_BASE_ADDR + 0x838)
+/* 32 bit */
+
+/* 0x83Ch - 0xFFCh are reserved */
+
+/*
+ * ARP2 External Processor Registers, Address Range : (0x00-0x1F)
+ */
+#define ARP2CTL		0x00
+
+#define		FRCSCRPERR		0x00040000
+#define		FRCARP2PERR		0x00020000
+#define		FRCARP2ILLOPC		0x00010000
+#define		ENWAITTO		0x00008000
+#define		PERRORDIS		0x00004000
+#define		FAILDIS			0x00002000
+#define		CIOPERRDIS		0x00001000
+#define		BREAKEN3		0x00000800
+#define		BREAKEN2		0x00000400
+#define		BREAKEN1		0x00000200
+#define		BREAKEN0		0x00000100
+#define		EPAUSE			0x00000008
+#define		PAUSED			0x00000004	/* ro */
+#define		STEP			0x00000002
+#define		ARP2RESET		0x00000001	/* wo */
+
+#define ARP2INT		0x04
+
+#define		HALTCODE_MASK		0x00FF0000	/* ro */
+#define		ARP2WAITTO		0x00000100
+#define		ARP2HALTC		0x00000080
+#define		ARP2ILLOPC		0x00000040
+#define		ARP2PERR		0x00000020
+#define		ARP2CIOPERR		0x00000010
+#define		ARP2BREAK3		0x00000008
+#define		ARP2BREAK2		0x00000004
+#define		ARP2BREAK1		0x00000002
+#define		ARP2BREAK0		0x00000001
+
+#define ARP2INTEN	0x08
+
+#define		EN_ARP2WAITTO		0x00000100
+#define		EN_ARP2HALTC		0x00000080
+#define		EN_ARP2ILLOPC		0x00000040
+#define		EN_ARP2PERR		0x00000020
+#define		EN_ARP2CIOPERR		0x00000010
+#define		EN_ARP2BREAK3		0x00000008
+#define		EN_ARP2BREAK2		0x00000004
+#define		EN_ARP2BREAK1		0x00000002
+#define		EN_ARP2BREAK0		0x00000001
+
+#define ARP2BREAKADR01	0x0C
+
+#define		BREAKADR1_MASK		0x0FFF0000
+#define		BREAKADR0_MASK		0x00000FFF
+
+#define	ARP2BREAKADR23	0x10
+
+#define		BREAKADR3_MASK		0x0FFF0000
+#define		BREAKADR2_MASK		0x00000FFF
+
+/* 0x14h - 0x1Ch are reserved */
+
+/*
+ * ARP2 Registers, Address Range : (0x00-0x1F)
+ * The definitions have the same address offset for CSEQ and LmSEQ
+ * CIO Bus Registers.
+ */
+#define MODEPTR		0x00
+
+#define		DSTMODE			0xF0
+#define		SRCMODE			0x0F
+
+#define ALTMODE		0x01
+
+#define		ALTDMODE		0xF0
+#define		ALTSMODE		0x0F
+
+#define ATOMICXCHG	0x02
+
+#define FLAG		0x04
+
+#define		INTCODE_MASK		0xF0
+#define		ALTMODEV2		0x04
+#define		CARRY_INT		0x02
+#define		CARRY			0x01
+
+#define ARP2INTCTL	0x05
+
+#define 	PAUSEDIS		0x80
+#define		RSTINTCTL		0x40
+#define		POPALTMODE		0x08
+#define		ALTMODEV		0x04
+#define		INTMASK			0x02
+#define		IRET			0x01
+
+#define STACK		0x06
+
+#define FUNCTION1	0x07
+
+#define PRGMCNT		0x08
+
+#define ACCUM		0x0A
+
+#define SINDEX		0x0C
+
+#define DINDEX		0x0E
+
+#define ALLONES		0x10
+
+#define ALLZEROS	0x11
+
+#define SINDIR		0x12
+
+#define DINDIR		0x13
+
+#define JUMLDIR		0x14
+
+#define ARP2HALTCODE	0x15
+
+#define CURRADDR	0x16
+
+#define LASTADDR	0x18
+
+#define NXTLADDR	0x1A
+
+#define DBGPORTPTR	0x1C
+
+#define DBGPORT		0x1D
+
+/*
+ * CIO Registers.
+ * The definitions have the same address offset for CSEQ and LmSEQ
+ * CIO Bus Registers.
+ */
+#define MnSCBPTR      	0x20
+
+#define MnDDBPTR      	0x22
+
+#define SCRATCHPAGE	0x24
+
+#define MnSCRATCHPAGE	0x25
+
+#define SCRATCHPAGESV	0x26
+
+#define MnSCRATCHPAGESV	0x27
+
+#define MnDMAERRS	0x46
+
+#define MnSGDMAERRS	0x47
+
+#define MnSGBUF		0x53
+
+#define MnSGDMASTAT	0x5b
+
+#define MnDDMACTL	0x5c	/* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDDMASTAT	0x5d	/* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDDMAMODE	0x5e	/* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDMAENG	0x60
+
+#define MnPIPECTL	0x61
+
+#define MnSGBADR	0x65
+
+#define MnSCB_SITE	0x100
+
+#define MnDDB_SITE	0x180
+
+/*
+ * The common definitions below have the same address offset for both
+ * CSEQ and LmSEQ.
+ */
+#define BISTCTL0	0x4C
+
+#define BISTCTL1	0x50
+
+#define MAPPEDSCR	0x800
+
+/*
+ * CSEQ Host Register, Address Range : (0x000-0xFFC)
+ */
+#define CSEQ_HOST_REG_BASE_ADR		0xB8001000
+
+#define CARP2CTL			(CSEQ_HOST_REG_BASE_ADR	+ ARP2CTL)
+
+#define CARP2INT			(CSEQ_HOST_REG_BASE_ADR	+ ARP2INT)
+
+#define CARP2INTEN			(CSEQ_HOST_REG_BASE_ADR	+ ARP2INTEN)
+
+#define CARP2BREAKADR01			(CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR01)
+
+#define CARP2BREAKADR23			(CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR23)
+
+#define CBISTCTL			(CSEQ_HOST_REG_BASE_ADR	+ BISTCTL1)
+
+#define		CSEQRAMBISTEN		0x00000040
+#define		CSEQRAMBISTDN		0x00000020	/* ro */
+#define		CSEQRAMBISTFAIL		0x00000010	/* ro */
+#define		CSEQSCRBISTEN		0x00000004
+#define		CSEQSCRBISTDN		0x00000002	/* ro */
+#define		CSEQSCRBISTFAIL		0x00000001	/* ro */
+
+#define CMAPPEDSCR			(CSEQ_HOST_REG_BASE_ADR	+ MAPPEDSCR)
+
+/*
+ * CSEQ CIO Bus Registers, Address Range : (0x0000-0x1FFC)
+ * 16 modes, each mode is 512 bytes.
+ * Unless specified, the register should valid for all modes.
+ */
+#define CSEQ_CIO_REG_BASE_ADR		REG_BASE_ADDR_CSEQCIO
+
+#define CSEQm_CIO_REG(Mode, Reg) \
+		(CSEQ_CIO_REG_BASE_ADR  + \
+		((u32) (Mode) * CSEQ_MODE_PAGE_SIZE) + (u32) (Reg))
+
+#define CMODEPTR	(CSEQ_CIO_REG_BASE_ADR + MODEPTR)
+
+#define CALTMODE	(CSEQ_CIO_REG_BASE_ADR + ALTMODE)
+
+#define CATOMICXCHG	(CSEQ_CIO_REG_BASE_ADR + ATOMICXCHG)
+
+#define CFLAG		(CSEQ_CIO_REG_BASE_ADR + FLAG)
+
+#define CARP2INTCTL	(CSEQ_CIO_REG_BASE_ADR + ARP2INTCTL)
+
+#define CSTACK		(CSEQ_CIO_REG_BASE_ADR + STACK)
+
+#define CFUNCTION1	(CSEQ_CIO_REG_BASE_ADR + FUNCTION1)
+
+#define CPRGMCNT	(CSEQ_CIO_REG_BASE_ADR + PRGMCNT)
+
+#define CACCUM		(CSEQ_CIO_REG_BASE_ADR + ACCUM)
+
+#define CSINDEX		(CSEQ_CIO_REG_BASE_ADR + SINDEX)
+
+#define CDINDEX		(CSEQ_CIO_REG_BASE_ADR + DINDEX)
+
+#define CALLONES	(CSEQ_CIO_REG_BASE_ADR + ALLONES)
+
+#define CALLZEROS	(CSEQ_CIO_REG_BASE_ADR + ALLZEROS)
+
+#define CSINDIR		(CSEQ_CIO_REG_BASE_ADR + SINDIR)
+
+#define CDINDIR		(CSEQ_CIO_REG_BASE_ADR + DINDIR)
+
+#define CJUMLDIR	(CSEQ_CIO_REG_BASE_ADR + JUMLDIR)
+
+#define CARP2HALTCODE	(CSEQ_CIO_REG_BASE_ADR + ARP2HALTCODE)
+
+#define CCURRADDR	(CSEQ_CIO_REG_BASE_ADR + CURRADDR)
+
+#define CLASTADDR	(CSEQ_CIO_REG_BASE_ADR + LASTADDR)
+
+#define CNXTLADDR	(CSEQ_CIO_REG_BASE_ADR + NXTLADDR)
+
+#define CDBGPORTPTR	(CSEQ_CIO_REG_BASE_ADR + DBGPORTPTR)
+
+#define CDBGPORT	(CSEQ_CIO_REG_BASE_ADR + DBGPORT)
+
+#define CSCRATCHPAGE	(CSEQ_CIO_REG_BASE_ADR + SCRATCHPAGE)
+
+#define CMnSCBPTR(Mode)       CSEQm_CIO_REG(Mode, MnSCBPTR)
+
+#define CMnDDBPTR(Mode)       CSEQm_CIO_REG(Mode, MnDDBPTR)
+
+#define CMnSCRATCHPAGE(Mode)		CSEQm_CIO_REG(Mode, MnSCRATCHPAGE)
+
+#define CLINKCON	(CSEQ_CIO_REG_BASE_ADR + 0x28)
+
+#define	CCIOAACESS	(CSEQ_CIO_REG_BASE_ADR + 0x2C)
+
+/* mode 0-7 */
+#define MnREQMBX 0x30
+#define CMnREQMBX(Mode)			CSEQm_CIO_REG(Mode, 0x30)
+
+/* mode 8 */
+#define CSEQCON				CSEQm_CIO_REG(8, 0x30)
+
+/* mode 0-7 */
+#define MnRSPMBX 0x34
+#define CMnRSPMBX(Mode)			CSEQm_CIO_REG(Mode, 0x34)
+
+/* mode 8 */
+#define CSEQCOMCTL			CSEQm_CIO_REG(8, 0x34)
+
+/* mode 8 */
+#define CSEQCOMSTAT			CSEQm_CIO_REG(8, 0x35)
+
+/* mode 8 */
+#define CSEQCOMINTEN			CSEQm_CIO_REG(8, 0x36)
+
+/* mode 8 */
+#define CSEQCOMDMACTL			CSEQm_CIO_REG(8, 0x37)
+
+#define		CSHALTERR		0x10
+#define		RESETCSDMA		0x08		/* wo */
+#define		STARTCSDMA		0x04
+#define		STOPCSDMA		0x02		/* wo */
+#define		CSDMAACT		0x01		/* ro */
+
+/* mode 0-7 */
+#define MnINT 0x38
+#define CMnINT(Mode)			CSEQm_CIO_REG(Mode, 0x38)
+
+#define		CMnREQMBXE		0x02
+#define		CMnRSPMBXF		0x01
+#define		CMnINT_MASK		0x00000003
+
+/* mode 8 */
+#define CSEQREQMBX			CSEQm_CIO_REG(8, 0x38)
+
+/* mode 0-7 */
+#define MnINTEN 0x3C
+#define CMnINTEN(Mode)			CSEQm_CIO_REG(Mode, 0x3C)
+
+#define		EN_CMnRSPMBXF		0x01
+
+/* mode 8 */
+#define CSEQRSPMBX			CSEQm_CIO_REG(8, 0x3C)
+
+/* mode 8 */
+#define CSDMAADR			CSEQm_CIO_REG(8, 0x40)
+
+/* mode 8 */
+#define CSDMACNT			CSEQm_CIO_REG(8, 0x48)
+
+/* mode 8 */
+#define CSEQDLCTL			CSEQm_CIO_REG(8, 0x4D)
+
+#define		DONELISTEND		0x10
+#define 	DONELISTSIZE_MASK	0x0F
+#define		DONELISTSIZE_8ELEM	0x01
+#define		DONELISTSIZE_16ELEM	0x02
+#define		DONELISTSIZE_32ELEM	0x03
+#define		DONELISTSIZE_64ELEM	0x04
+#define		DONELISTSIZE_128ELEM	0x05
+#define		DONELISTSIZE_256ELEM	0x06
+#define		DONELISTSIZE_512ELEM	0x07
+#define		DONELISTSIZE_1024ELEM	0x08
+#define		DONELISTSIZE_2048ELEM	0x09
+#define		DONELISTSIZE_4096ELEM	0x0A
+#define		DONELISTSIZE_8192ELEM	0x0B
+#define		DONELISTSIZE_16384ELEM	0x0C
+
+/* mode 8 */
+#define CSEQDLOFFS			CSEQm_CIO_REG(8, 0x4E)
+
+/* mode 11 */
+#define CM11INTVEC0			CSEQm_CIO_REG(11, 0x50)
+
+/* mode 11 */
+#define CM11INTVEC1			CSEQm_CIO_REG(11, 0x52)
+
+/* mode 11 */
+#define CM11INTVEC2			CSEQm_CIO_REG(11, 0x54)
+
+#define	CCONMSK	  			(CSEQ_CIO_REG_BASE_ADR + 0x60)
+
+#define	CCONEXIST			(CSEQ_CIO_REG_BASE_ADR + 0x61)
+
+#define	CCONMODE			(CSEQ_CIO_REG_BASE_ADR + 0x62)
+
+#define CTIMERCALC			(CSEQ_CIO_REG_BASE_ADR + 0x64)
+
+#define CINTDIS				(CSEQ_CIO_REG_BASE_ADR + 0x68)
+
+/* mode 8, 32x32 bits, 128 bytes of mapped buffer */
+#define CSBUFFER			CSEQm_CIO_REG(8, 0x80)
+
+#define	CSCRATCH			(CSEQ_CIO_REG_BASE_ADR + 0x1C0)
+
+/* mode 0-8 */
+#define CMnSCRATCH(Mode)		CSEQm_CIO_REG(Mode, 0x1E0)
+
+/*
+ * CSEQ Mapped Instruction RAM Page, Address Range : (0x0000-0x1FFC)
+ */
+#define CSEQ_RAM_REG_BASE_ADR		0xB8004000
+
+/*
+ * The common definitions below have the same address offset for all the Link
+ * sequencers.
+ */
+#define MODECTL		0x40
+
+#define DBGMODE		0x44
+
+#define CONTROL		0x48
+#define LEDTIMER		0x00010000
+#define LEDTIMERS_10us		0x00000000
+#define LEDTIMERS_1ms		0x00000800
+#define LEDTIMERS_100ms		0x00001000
+#define LEDMODE_TXRX		0x00000000
+#define LEDMODE_CONNECTED	0x00000200
+#define LEDPOL			0x00000100
+
+#define LSEQRAM		0x1000
+
+/*
+ * LmSEQ Host Registers, Address Range : (0x0000-0x3FFC)
+ */
+#define LSEQ0_HOST_REG_BASE_ADR		0xB8020000
+#define LSEQ1_HOST_REG_BASE_ADR		0xB8024000
+#define LSEQ2_HOST_REG_BASE_ADR		0xB8028000
+#define LSEQ3_HOST_REG_BASE_ADR		0xB802C000
+#define LSEQ4_HOST_REG_BASE_ADR		0xB8030000
+#define LSEQ5_HOST_REG_BASE_ADR		0xB8034000
+#define LSEQ6_HOST_REG_BASE_ADR		0xB8038000
+#define LSEQ7_HOST_REG_BASE_ADR		0xB803C000
+
+#define LmARP2CTL(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					ARP2CTL)
+
+#define LmARP2INT(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					ARP2INT)
+
+#define LmARP2INTEN(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					ARP2INTEN)
+
+#define LmDBGMODE(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					DBGMODE)
+
+#define LmCONTROL(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					CONTROL)
+
+#define LmARP2BREAKADR01(LinkNum)	(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					ARP2BREAKADR01)
+
+#define LmARP2BREAKADR23(LinkNum)	(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					ARP2BREAKADR23)
+
+#define LmMODECTL(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					MODECTL)
+
+#define		LmAUTODISCI		0x08000000
+#define		LmDSBLBITLT		0x04000000
+#define		LmDSBLANTT		0x02000000
+#define		LmDSBLCRTT		0x01000000
+#define		LmDSBLCONT		0x00000100
+#define		LmPRIMODE		0x00000080
+#define		LmDSBLHOLD		0x00000040
+#define		LmDISACK		0x00000020
+#define		LmBLIND48		0x00000010
+#define		LmRCVMODE_MASK		0x0000000C
+#define		LmRCVMODE_PLD		0x00000000
+#define		LmRCVMODE_HPC		0x00000004
+
+#define LmDBGMODE(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					DBGMODE)
+
+#define		LmFRCPERR		0x80000000
+#define		LmMEMSEL_MASK		0x30000000
+#define		LmFRCRBPERR		0x00000000
+#define		LmFRCTBPERR		0x10000000
+#define		LmFRCSGBPERR		0x20000000
+#define		LmFRCARBPERR		0x30000000
+#define		LmRCVIDW		0x00080000
+#define		LmINVDWERR		0x00040000
+#define		LmRCVDISP		0x00004000
+#define		LmDISPERR		0x00002000
+#define		LmDSBLDSCR		0x00000800
+#define		LmDSBLSCR		0x00000400
+#define		LmFRCNAK		0x00000200
+#define		LmFRCROFS		0x00000100
+#define		LmFRCCRC		0x00000080
+#define		LmFRMTYPE_MASK		0x00000070
+#define		LmSG_DATA		0x00000000
+#define		LmSG_COMMAND		0x00000010
+#define		LmSG_TASK		0x00000020
+#define		LmSG_TGTXFER		0x00000030
+#define		LmSG_RESPONSE		0x00000040
+#define		LmSG_IDENADDR		0x00000050
+#define		LmSG_OPENADDR		0x00000060
+#define		LmDISCRCGEN		0x00000008
+#define		LmDISCRCCHK		0x00000004
+#define		LmSSXMTFRM		0x00000002
+#define		LmSSRCVFRM		0x00000001
+
+#define LmCONTROL(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					CONTROL)
+
+#define		LmSTEPXMTFRM		0x00000002
+#define		LmSTEPRCVFRM		0x00000001
+
+#define LmBISTCTL0(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	  \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+					BISTCTL0)
+
+#define		ARBBISTEN		0x40000000
+#define		ARBBISTDN		0x20000000	/* ro */
+#define		ARBBISTFAIL		0x10000000	/* ro */
+#define		TBBISTEN		0x00000400
+#define		TBBISTDN		0x00000200	/* ro */
+#define		TBBISTFAIL		0x00000100	/* ro */
+#define		RBBISTEN		0x00000040
+#define		RBBISTDN		0x00000020	/* ro */
+#define		RBBISTFAIL		0x00000010	/* ro */
+#define		SGBISTEN		0x00000004
+#define		SGBISTDN		0x00000002	/* ro */
+#define		SGBISTFAIL		0x00000001	/* ro */
+
+#define LmBISTCTL1(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	 \
+					((LinkNum)*LmSEQ_HOST_REG_SIZE) +\
+					BISTCTL1)
+
+#define		LmRAMPAGE1		0x00000200
+#define		LmRAMPAGE0		0x00000100
+#define		LmIMEMBISTEN		0x00000040
+#define		LmIMEMBISTDN		0x00000020	/* ro */
+#define		LmIMEMBISTFAIL		0x00000010	/* ro */
+#define		LmSCRBISTEN		0x00000004
+#define		LmSCRBISTDN		0x00000002	/* ro */
+#define		LmSCRBISTFAIL		0x00000001	/* ro */
+#define		LmRAMPAGE		(LmRAMPAGE1 + LmRAMPAGE0)
+#define		LmRAMPAGE_LSHIFT	0x8
+
+#define LmSCRATCH(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	   \
+					((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
+					MAPPEDSCR)
+
+#define LmSEQRAM(LinkNum)		(LSEQ0_HOST_REG_BASE_ADR +	   \
+					((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
+					LSEQRAM)
+
+/*
+ * LmSEQ CIO Bus Register, Address Range : (0x0000-0xFFC)
+ * 8 modes, each mode is 512 bytes.
+ * Unless specified, the register should valid for all modes.
+ */
+#define LmSEQ_CIOBUS_REG_BASE		0x2000
+
+#define  LmSEQ_PHY_BASE(Mode, LinkNum) \
+		(LSEQ0_HOST_REG_BASE_ADR + \
+		(LmSEQ_HOST_REG_SIZE * (u32) (LinkNum)) + \
+		LmSEQ_CIOBUS_REG_BASE + \
+		((u32) (Mode) * LmSEQ_MODE_PAGE_SIZE))
+
+#define  LmSEQ_PHY_REG(Mode, LinkNum, Reg) \
+                 (LmSEQ_PHY_BASE(Mode, LinkNum) + (u32) (Reg))
+
+#define LmMODEPTR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, MODEPTR)
+
+#define LmALTMODE(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, ALTMODE)
+
+#define LmATOMICXCHG(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, ATOMICXCHG)
+
+#define LmFLAG(LinkNum)			LmSEQ_PHY_REG(0, LinkNum, FLAG)
+
+#define LmARP2INTCTL(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, ARP2INTCTL)
+
+#define LmSTACK(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, STACK)
+
+#define LmFUNCTION1(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, FUNCTION1)
+
+#define LmPRGMCNT(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, PRGMCNT)
+
+#define LmACCUM(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, ACCUM)
+
+#define LmSINDEX(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, SINDEX)
+
+#define LmDINDEX(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, DINDEX)
+
+#define LmALLONES(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, ALLONES)
+
+#define LmALLZEROS(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, ALLZEROS)
+
+#define LmSINDIR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, SINDIR)
+
+#define LmDINDIR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, DINDIR)
+
+#define LmJUMLDIR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, JUMLDIR)
+
+#define LmARP2HALTCODE(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, ARP2HALTCODE)
+
+#define LmCURRADDR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, CURRADDR)
+
+#define LmLASTADDR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, LASTADDR)
+
+#define LmNXTLADDR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, NXTLADDR)
+
+#define LmDBGPORTPTR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, DBGPORTPTR)
+
+#define LmDBGPORT(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, DBGPORT)
+
+#define LmSCRATCHPAGE(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, SCRATCHPAGE)
+
+#define LmMnSCRATCHPAGE(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 	\
+						      MnSCRATCHPAGE)
+
+#define LmTIMERCALC(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x28)
+
+#define LmREQMBX(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x30)
+
+#define LmRSPMBX(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x34)
+
+#define LmMnINT(LinkNum, Mode)		LmSEQ_PHY_REG(Mode, LinkNum, 0x38)
+
+#define		CTXMEMSIZE		0x80000000	/* ro */
+#define		LmACKREQ		0x08000000
+#define		LmNAKREQ		0x04000000
+#define		LmMnXMTERR		0x02000000
+#define		LmM5OOBSVC		0x01000000
+#define		LmHWTINT		0x00800000
+#define		LmMnCTXDONE		0x00100000
+#define		LmM2REQMBXF		0x00080000
+#define		LmM2RSPMBXE		0x00040000
+#define		LmMnDMAERR		0x00020000
+#define		LmRCVPRIM		0x00010000
+#define		LmRCVERR		0x00008000
+#define		LmADDRRCV		0x00004000
+#define		LmMnHDRMISS		0x00002000
+#define		LmMnWAITSCB		0x00001000
+#define		LmMnRLSSCB		0x00000800
+#define		LmMnSAVECTX		0x00000400
+#define		LmMnFETCHSG		0x00000200
+#define		LmMnLOADCTX		0x00000100
+#define		LmMnCFGICL		0x00000080
+#define		LmMnCFGSATA		0x00000040
+#define		LmMnCFGEXPSATA		0x00000020
+#define		LmMnCFGCMPLT		0x00000010
+#define		LmMnCFGRBUF		0x00000008
+#define		LmMnSAVETTR		0x00000004
+#define		LmMnCFGRDAT		0x00000002
+#define		LmMnCFGHDR		0x00000001
+
+#define LmMnINTEN(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x3C)
+
+#define		EN_LmACKREQ		0x08000000
+#define		EN_LmNAKREQ		0x04000000
+#define		EN_LmMnXMTERR		0x02000000
+#define		EN_LmM5OOBSVC		0x01000000
+#define		EN_LmHWTINT		0x00800000
+#define		EN_LmMnCTXDONE		0x00100000
+#define		EN_LmM2REQMBXF		0x00080000
+#define		EN_LmM2RSPMBXE		0x00040000
+#define		EN_LmMnDMAERR		0x00020000
+#define		EN_LmRCVPRIM		0x00010000
+#define		EN_LmRCVERR		0x00008000
+#define		EN_LmADDRRCV		0x00004000
+#define		EN_LmMnHDRMISS		0x00002000
+#define		EN_LmMnWAITSCB		0x00001000
+#define		EN_LmMnRLSSCB		0x00000800
+#define		EN_LmMnSAVECTX		0x00000400
+#define		EN_LmMnFETCHSG		0x00000200
+#define		EN_LmMnLOADCTX		0x00000100
+#define		EN_LmMnCFGICL		0x00000080
+#define		EN_LmMnCFGSATA		0x00000040
+#define		EN_LmMnCFGEXPSATA	0x00000020
+#define		EN_LmMnCFGCMPLT		0x00000010
+#define		EN_LmMnCFGRBUF		0x00000008
+#define		EN_LmMnSAVETTR		0x00000004
+#define		EN_LmMnCFGRDAT		0x00000002
+#define		EN_LmMnCFGHDR		0x00000001
+
+#define		LmM0INTEN_MASK		(EN_LmMnCFGCMPLT | EN_LmMnCFGRBUF | \
+					 EN_LmMnSAVETTR | EN_LmMnCFGRDAT | \
+					 EN_LmMnCFGHDR | EN_LmRCVERR | \
+					 EN_LmADDRRCV | EN_LmMnHDRMISS | \
+					 EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
+					 EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
+					 EN_LmHWTINT | EN_LmMnCTXDONE | \
+					 EN_LmRCVPRIM | EN_LmMnCFGSATA | \
+					 EN_LmMnCFGEXPSATA | EN_LmMnDMAERR)
+
+#define		LmM1INTEN_MASK		(EN_LmMnCFGCMPLT | EN_LmADDRRCV | \
+					 EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
+					 EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
+					 EN_LmMnXMTERR | EN_LmHWTINT | \
+					 EN_LmMnCTXDONE | EN_LmRCVPRIM | \
+					 EN_LmRCVERR | EN_LmMnDMAERR)
+
+#define		LmM2INTEN_MASK		(EN_LmADDRRCV | EN_LmHWTINT | \
+					 EN_LmM2REQMBXF | EN_LmRCVPRIM | \
+					 EN_LmRCVERR)
+
+#define		LmM5INTEN_MASK		(EN_LmADDRRCV | EN_LmM5OOBSVC | \
+					 EN_LmHWTINT | EN_LmRCVPRIM | \
+					 EN_LmRCVERR)
+
+#define LmXMTPRIMD(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x40)
+
+#define LmXMTPRIMCS(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x44)
+
+#define LmCONSTAT(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x45)
+
+#define LmMnDMAERRS(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x46)
+
+#define LmMnSGDMAERRS(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x47)
+
+#define LmM0EXPHDRP(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x48)
+
+#define LmM1SASALIGN(LinkNum)		LmSEQ_PHY_REG(1, LinkNum, 0x48)
+#define SAS_ALIGN_DEFAULT		0xFF
+
+#define LmM0MSKHDRP(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x49)
+
+#define LmM1STPALIGN(LinkNum)		LmSEQ_PHY_REG(1, LinkNum, 0x49)
+#define STP_ALIGN_DEFAULT		0x1F
+
+#define LmM0RCVHDRP(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x4A)
+
+#define LmM1XMTHDRP(LinkNum)		LmSEQ_PHY_REG(1, LinkNum, 0x4A)
+
+#define LmM0ICLADR(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x4B)
+
+#define LmM1ALIGNMODE(LinkNum)		LmSEQ_PHY_REG(1, LinkNum, 0x4B)
+
+#define		LmDISALIGN		0x20
+#define		LmROTSTPALIGN		0x10
+#define		LmSTPALIGN		0x08
+#define		LmROTNOTIFY		0x04
+#define		LmDUALALIGN		0x02
+#define		LmROTALIGN		0x01
+
+#define LmM0EXPRCVNT(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x4C)
+
+#define LmM1XMTCNT(LinkNum)		LmSEQ_PHY_REG(1, LinkNum, 0x4C)
+
+#define LmMnBUFSTAT(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x4E)
+
+#define		LmMnBUFPERR		0x01
+
+/* mode 0-1 */
+#define LmMnXFRLVL(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x59)
+
+#define		LmMnXFRLVL_128		0x05
+#define		LmMnXFRLVL_256		0x04
+#define		LmMnXFRLVL_512		0x03
+#define		LmMnXFRLVL_1024		0x02
+#define		LmMnXFRLVL_1536		0x01
+#define		LmMnXFRLVL_2048		0x00
+
+ /* mode 0-1 */
+#define LmMnSGDMACTL(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x5A)
+
+#define 	LmMnRESETSG		0x04
+#define 	LmMnSTOPSG		0x02
+#define 	LmMnSTARTSG		0x01
+
+/* mode 0-1 */
+#define LmMnSGDMASTAT(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x5B)
+
+/* mode 0-1 */
+#define LmMnDDMACTL(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x5C)
+
+#define 	LmMnFLUSH		0x40		/* wo */
+#define 	LmMnRLSRTRY		0x20		/* wo */
+#define 	LmMnDISCARD		0x10		/* wo */
+#define 	LmMnRESETDAT		0x08		/* wo */
+#define 	LmMnSUSDAT		0x04		/* wo */
+#define 	LmMnSTOPDAT		0x02		/* wo */
+#define 	LmMnSTARTDAT		0x01		/* wo */
+
+/* mode 0-1 */
+#define LmMnDDMASTAT(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x5D)
+
+#define		LmMnDPEMPTY		0x80
+#define		LmMnFLUSHING		0x40
+#define		LmMnDDMAREQ		0x20
+#define		LmMnHDMAREQ		0x10
+#define		LmMnDATFREE		0x08
+#define		LmMnDATSUS		0x04
+#define		LmMnDATACT		0x02
+#define		LmMnDATEN		0x01
+
+/* mode 0-1 */
+#define LmMnDDMAMODE(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x5E)
+
+#define 	LmMnDMATYPE_NORMAL		0x0000
+#define 	LmMnDMATYPE_HOST_ONLY_TX	0x0001
+#define 	LmMnDMATYPE_DEVICE_ONLY_TX	0x0002
+#define 	LmMnDMATYPE_INVALID		0x0003
+#define 	LmMnDMATYPE_MASK	0x0003
+
+#define 	LmMnDMAWRAP		0x0004
+#define 	LmMnBITBUCKET		0x0008
+#define 	LmMnDISHDR		0x0010
+#define 	LmMnSTPCRC		0x0020
+#define 	LmXTEST			0x0040
+#define 	LmMnDISCRC		0x0080
+#define 	LmMnENINTLK		0x0100
+#define 	LmMnADDRFRM		0x0400
+#define 	LmMnENXMTCRC		0x0800
+
+/* mode 0-1 */
+#define LmMnXFRCNT(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x70)
+
+/* mode 0-1 */
+#define LmMnDPSEL(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x7B)
+#define 	LmMnDPSEL_MASK		0x07
+#define 	LmMnEOLPRE		0x40
+#define 	LmMnEOSPRE		0x80
+
+/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
+/* Receive Mode n = 0 */
+#define LmMnHRADDR			0x00
+#define LmMnHBYTECNT			0x01
+#define LmMnHREWIND			0x02
+#define LmMnDWADDR			0x03
+#define LmMnDSPACECNT			0x04
+#define LmMnDFRMSIZE			0x05
+
+/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
+/* Transmit Mode n = 1 */
+#define LmMnHWADDR			0x00
+#define LmMnHSPACECNT			0x01
+/* #define LmMnHREWIND			0x02 */
+#define LmMnDRADDR			0x03
+#define LmMnDBYTECNT			0x04
+/* #define LmMnDFRMSIZE			0x05 */
+
+/* mode 0-1 */
+#define LmMnDPACC(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x78)
+#define 	LmMnDPACC_MASK		0x00FFFFFF
+
+/* mode 0-1 */
+#define LmMnHOLDLVL(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x7D)
+
+#define LmPRMSTAT0(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x80)
+#define LmPRMSTAT0BYTE0			0x80
+#define LmPRMSTAT0BYTE1			0x81
+#define LmPRMSTAT0BYTE2			0x82
+#define LmPRMSTAT0BYTE3			0x83
+
+#define		LmFRAMERCVD		0x80000000
+#define		LmXFRRDYRCVD		0x40000000
+#define		LmUNKNOWNP		0x20000000
+#define		LmBREAK			0x10000000
+#define		LmDONE			0x08000000
+#define		LmOPENACPT		0x04000000
+#define		LmOPENRJCT		0x02000000
+#define		LmOPENRTRY		0x01000000
+#define		LmCLOSERV1		0x00800000
+#define		LmCLOSERV0		0x00400000
+#define		LmCLOSENORM		0x00200000
+#define		LmCLOSECLAF		0x00100000
+#define		LmNOTIFYRV2		0x00080000
+#define		LmNOTIFYRV1		0x00040000
+#define		LmNOTIFYRV0		0x00020000
+#define		LmNOTIFYSPIN		0x00010000
+#define		LmBROADRV4		0x00008000
+#define		LmBROADRV3		0x00004000
+#define		LmBROADRV2		0x00002000
+#define		LmBROADRV1		0x00001000
+#define		LmBROADSES		0x00000800
+#define		LmBROADRVCH1		0x00000400
+#define		LmBROADRVCH0		0x00000200
+#define		LmBROADCH		0x00000100
+#define		LmAIPRVWP		0x00000080
+#define		LmAIPWP			0x00000040
+#define		LmAIPWD			0x00000020
+#define		LmAIPWC			0x00000010
+#define		LmAIPRV2		0x00000008
+#define		LmAIPRV1		0x00000004
+#define		LmAIPRV0		0x00000002
+#define		LmAIPNRML		0x00000001
+
+#define		LmBROADCAST_MASK	(LmBROADCH | LmBROADRVCH0 | \
+					 LmBROADRVCH1)
+
+#define LmPRMSTAT1(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0x84)
+#define LmPRMSTAT1BYTE0			0x84
+#define LmPRMSTAT1BYTE1			0x85
+#define LmPRMSTAT1BYTE2			0x86
+#define LmPRMSTAT1BYTE3			0x87
+
+#define		LmFRMRCVDSTAT		0x80000000
+#define		LmBREAK_DET		0x04000000
+#define		LmCLOSE_DET		0x02000000
+#define		LmDONE_DET		0x01000000
+#define		LmXRDY			0x00040000
+#define 	LmSYNCSRST		0x00020000
+#define 	LmSYNC			0x00010000
+#define 	LmXHOLD			0x00008000
+#define 	LmRRDY			0x00004000
+#define 	LmHOLD			0x00002000
+#define 	LmROK			0x00001000
+#define 	LmRIP			0x00000800
+#define 	LmCRBLK			0x00000400
+#define 	LmACK			0x00000200
+#define 	LmNAK			0x00000100
+#define 	LmHARDRST		0x00000080
+#define 	LmERROR			0x00000040
+#define 	LmRERR			0x00000020
+#define 	LmPMREQP		0x00000010
+#define 	LmPMREQS		0x00000008
+#define 	LmPMACK			0x00000004
+#define 	LmPMNAK			0x00000002
+#define 	LmDMAT			0x00000001
+
+/* mode 1 */
+#define	LmMnSATAFS(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x7E)
+#define	LmMnXMTSIZE(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0x93)
+
+/* mode 0 */
+#define LmMnFRMERR(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0xB0)
+
+#define		LmACRCERR		0x00000800
+#define		LmPHYOVRN		0x00000400
+#define		LmOBOVRN		0x00000200
+#define 	LmMnZERODATA		0x00000100
+#define		LmSATAINTLK		0x00000080
+#define		LmMnCRCERR		0x00000020
+#define		LmRRDYOVRN		0x00000010
+#define		LmMISSSOAF		0x00000008
+#define		LmMISSSOF		0x00000004
+#define		LmMISSEOAF		0x00000002
+#define		LmMISSEOF		0x00000001
+
+#define LmFRMERREN(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0xB4)
+
+#define 	EN_LmACRCERR		0x00000800
+#define 	EN_LmPHYOVRN		0x00000400
+#define 	EN_LmOBOVRN		0x00000200
+#define 	EN_LmMnZERODATA		0x00000100
+#define 	EN_LmSATAINTLK		0x00000080
+#define 	EN_LmFRMBAD		0x00000040
+#define 	EN_LmMnCRCERR		0x00000020
+#define 	EN_LmRRDYOVRN		0x00000010
+#define 	EN_LmMISSSOAF		0x00000008
+#define 	EN_LmMISSSOF		0x00000004
+#define 	EN_LmMISSEOAF		0x00000002
+#define 	EN_LmMISSEOF		0x00000001
+
+#define 	LmFRMERREN_MASK  	(EN_LmSATAINTLK | EN_LmMnCRCERR | \
+					 EN_LmRRDYOVRN | EN_LmMISSSOF | \
+					 EN_LmMISSEOAF | EN_LmMISSEOF | \
+					 EN_LmACRCERR | LmPHYOVRN | \
+					 EN_LmOBOVRN | EN_LmMnZERODATA)
+
+#define LmHWTSTATEN(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0xC5)
+
+#define		EN_LmDONETO		0x80
+#define		EN_LmINVDISP		0x40
+#define		EN_LmINVDW		0x20
+#define		EN_LmDWSEVENT		0x08
+#define		EN_LmCRTTTO		0x04
+#define		EN_LmANTTTO		0x02
+#define		EN_LmBITLTTO		0x01
+
+#define		LmHWTSTATEN_MASK	(EN_LmINVDISP | EN_LmINVDW | \
+					 EN_LmDWSEVENT | EN_LmCRTTTO | \
+					 EN_LmANTTTO | EN_LmDONETO | \
+					 EN_LmBITLTTO)
+
+#define LmHWTSTAT(LinkNum) 		LmSEQ_PHY_REG(0, LinkNum, 0xC7)
+
+#define		LmDONETO		0x80
+#define		LmINVDISP		0x40
+#define		LmINVDW			0x20
+#define		LmDWSEVENT		0x08
+#define		LmCRTTTO		0x04
+#define		LmANTTTO		0x02
+#define		LmBITLTTO		0x01
+
+#define LmMnDATABUFADR(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0xC8)
+#define		LmDATABUFADR_MASK	0x0FFF
+
+#define LmMnDATABUF(LinkNum, Mode)	LmSEQ_PHY_REG(Mode, LinkNum, 0xCA)
+
+#define	LmPRIMSTAT0EN(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0xE0)
+
+#define 	EN_LmUNKNOWNP 		0x20000000
+#define 	EN_LmBREAK		0x10000000
+#define 	EN_LmDONE		0x08000000
+#define 	EN_LmOPENACPT		0x04000000
+#define 	EN_LmOPENRJCT		0x02000000
+#define 	EN_LmOPENRTRY		0x01000000
+#define 	EN_LmCLOSERV1		0x00800000
+#define 	EN_LmCLOSERV0		0x00400000
+#define 	EN_LmCLOSENORM		0x00200000
+#define 	EN_LmCLOSECLAF		0x00100000
+#define 	EN_LmNOTIFYRV2		0x00080000
+#define 	EN_LmNOTIFYRV1		0x00040000
+#define 	EN_LmNOTIFYRV0		0x00020000
+#define 	EN_LmNOTIFYSPIN		0x00010000
+#define 	EN_LmBROADRV4		0x00008000
+#define 	EN_LmBROADRV3		0x00004000
+#define 	EN_LmBROADRV2		0x00002000
+#define 	EN_LmBROADRV1		0x00001000
+#define 	EN_LmBROADRV0		0x00000800
+#define 	EN_LmBROADRVCH1		0x00000400
+#define 	EN_LmBROADRVCH0		0x00000200
+#define 	EN_LmBROADCH		0x00000100
+#define 	EN_LmAIPRVWP		0x00000080
+#define 	EN_LmAIPWP		0x00000040
+#define 	EN_LmAIPWD		0x00000020
+#define 	EN_LmAIPWC		0x00000010
+#define 	EN_LmAIPRV2		0x00000008
+#define 	EN_LmAIPRV1		0x00000004
+#define 	EN_LmAIPRV0		0x00000002
+#define 	EN_LmAIPNRML		0x00000001
+
+#define		LmPRIMSTAT0EN_MASK	(EN_LmBREAK | \
+					 EN_LmDONE | EN_LmOPENACPT | \
+					 EN_LmOPENRJCT | EN_LmOPENRTRY | \
+					 EN_LmCLOSERV1 | EN_LmCLOSERV0 | \
+					 EN_LmCLOSENORM | EN_LmCLOSECLAF | \
+					 EN_LmBROADRV4 | EN_LmBROADRV3 | \
+					 EN_LmBROADRV2 | EN_LmBROADRV1 | \
+					 EN_LmBROADRV0 | EN_LmBROADRVCH1 | \
+					 EN_LmBROADRVCH0 | EN_LmBROADCH | \
+					 EN_LmAIPRVWP | EN_LmAIPWP | \
+					 EN_LmAIPWD | EN_LmAIPWC | \
+					 EN_LmAIPRV2 | EN_LmAIPRV1 | \
+					 EN_LmAIPRV0 | EN_LmAIPNRML)
+
+#define LmPRIMSTAT1EN(LinkNum)		LmSEQ_PHY_REG(0, LinkNum, 0xE4)
+
+#define		EN_LmXRDY		0x00040000
+#define		EN_LmSYNCSRST		0x00020000
+#define		EN_LmSYNC		0x00010000
+#define 	EN_LmXHOLD		0x00008000
+#define 	EN_LmRRDY		0x00004000
+#define 	EN_LmHOLD		0x00002000
+#define 	EN_LmROK		0x00001000
+#define 	EN_LmRIP		0x00000800
+#define 	EN_LmCRBLK		0x00000400
+#define 	EN_LmACK		0x00000200
+#define 	EN_LmNAK		0x00000100
+#define 	EN_LmHARDRST		0x00000080
+#define 	EN_LmERROR		0x00000040
+#define 	EN_LmRERR		0x00000020
+#define 	EN_LmPMREQP		0x00000010
+#define 	EN_LmPMREQS		0x00000008
+#define 	EN_LmPMACK		0x00000004
+#define 	EN_LmPMNAK		0x00000002
+#define 	EN_LmDMAT		0x00000001
+
+#define LmPRIMSTAT1EN_MASK		(EN_LmHARDRST | \
+					 EN_LmSYNCSRST | \
+					 EN_LmPMREQP | EN_LmPMREQS | \
+					 EN_LmPMACK | EN_LmPMNAK)
+
+#define LmSMSTATE(LinkNum) 		LmSEQ_PHY_REG(0, LinkNum, 0xE8)
+
+#define LmSMSTATEBRK(LinkNum) 		LmSEQ_PHY_REG(0, LinkNum, 0xEC)
+
+#define LmSMDBGCTL(LinkNum) 		LmSEQ_PHY_REG(0, LinkNum, 0xF0)
+
+
+/*
+ * LmSEQ CIO Bus Mode 3 Register.
+ * Mode 3: Configuration and Setup, IOP Context SCB.
+ */
+#define LmM3SATATIMER(LinkNum) 		LmSEQ_PHY_REG(3, LinkNum, 0x48)
+
+#define LmM3INTVEC0(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0x90)
+
+#define LmM3INTVEC1(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0x92)
+
+#define LmM3INTVEC2(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0x94)
+
+#define LmM3INTVEC3(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0x96)
+
+#define LmM3INTVEC4(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0x98)
+
+#define LmM3INTVEC5(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0x9A)
+
+#define LmM3INTVEC6(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0x9C)
+
+#define LmM3INTVEC7(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0x9E)
+
+#define LmM3INTVEC8(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0xA4)
+
+#define LmM3INTVEC9(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0xA6)
+
+#define LmM3INTVEC10(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0xB0)
+
+#define LmM3FRMGAP(LinkNum)		LmSEQ_PHY_REG(3, LinkNum, 0xB4)
+
+#define LmBITL_TIMER(LinkNum) 		LmSEQ_PHY_REG(0, LinkNum, 0xA2)
+
+#define LmWWN(LinkNum) 			LmSEQ_PHY_REG(0, LinkNum, 0xA8)
+
+
+/*
+ * LmSEQ CIO Bus Mode 5 Registers.
+ * Mode 5: Phy/OOB Control and Status.
+ */
+#define LmSEQ_OOB_REG(phy_id, reg)	LmSEQ_PHY_REG(5, (phy_id), (reg))
+
+#define OOB_BFLTR	0x100
+
+#define		BFLTR_THR_MASK		0xF0
+#define		BFLTR_TC_MASK		0x0F
+
+#define OOB_INIT_MIN	0x102
+
+#define OOB_INIT_MAX	0x104
+
+#define OOB_INIT_NEG	0x106
+
+#define	OOB_SAS_MIN	0x108
+
+#define OOB_SAS_MAX	0x10A
+
+#define OOB_SAS_NEG	0x10C
+
+#define OOB_WAKE_MIN	0x10E
+
+#define OOB_WAKE_MAX	0x110
+
+#define OOB_WAKE_NEG	0x112
+
+#define OOB_IDLE_MAX	0x114
+
+#define OOB_BURST_MAX	0x116
+
+#define OOB_DATA_KBITS	0x126
+
+#define OOB_ALIGN_0_DATA	0x12C
+
+#define OOB_ALIGN_1_DATA	0x130
+
+#define D10_2_DATA_k		0x00
+#define SYNC_DATA_k		0x02
+#define ALIGN_1_DATA_k		0x04
+#define ALIGN_0_DATA_k		0x08
+#define BURST_DATA_k		0x10
+
+#define OOB_PHY_RESET_COUNT	0x13C
+
+#define OOB_SIG_GEN	0x140
+
+#define		START_OOB		0x80
+#define		START_DWS		0x40
+#define		ALIGN_CNT3		0x30
+#define 	ALIGN_CNT2		0x20
+#define 	ALIGN_CNT1		0x10
+#define 	ALIGN_CNT4		0x00
+#define		STOP_DWS		0x08
+#define		SEND_COMSAS		0x04
+#define		SEND_COMINIT		0x02
+#define		SEND_COMWAKE		0x01
+
+#define OOB_XMIT	0x141
+
+#define		TX_ENABLE		0x80
+#define		XMIT_OOB_BURST		0x10
+#define		XMIT_D10_2		0x08
+#define		XMIT_SYNC		0x04
+#define		XMIT_ALIGN_1		0x02
+#define		XMIT_ALIGN_0		0x01
+
+#define FUNCTION_MASK	0x142
+
+#define		SAS_MODE_DIS		0x80
+#define		SATA_MODE_DIS		0x40
+#define		SPINUP_HOLD_DIS		0x20
+#define		HOT_PLUG_DIS		0x10
+#define		SATA_PS_DIS		0x08
+#define		FUNCTION_MASK_DEFAULT	(SPINUP_HOLD_DIS | SATA_PS_DIS)
+
+#define OOB_MODE	0x143
+
+#define		SAS_MODE		0x80
+#define		SATA_MODE		0x40
+#define		SLOW_CLK		0x20
+#define		FORCE_XMIT_15		0x08
+#define		PHY_SPEED_60		0x04
+#define		PHY_SPEED_30		0x02
+#define		PHY_SPEED_15		0x01
+
+#define	CURRENT_STATUS	0x144
+
+#define		CURRENT_OOB_DONE	0x80
+#define		CURRENT_LOSS_OF_SIGNAL	0x40
+#define		CURRENT_SPINUP_HOLD	0x20
+#define		CURRENT_HOT_PLUG_CNCT	0x10
+#define		CURRENT_GTO_TIMEOUT	0x08
+#define		CURRENT_OOB_TIMEOUT	0x04
+#define		CURRENT_DEVICE_PRESENT	0x02
+#define		CURRENT_OOB_ERROR	0x01
+
+#define 	CURRENT_OOB1_ERROR	(CURRENT_HOT_PLUG_CNCT | \
+					 CURRENT_GTO_TIMEOUT)
+
+#define 	CURRENT_OOB2_ERROR	(CURRENT_HOT_PLUG_CNCT | \
+					 CURRENT_OOB_ERROR)
+
+#define		DEVICE_ADDED_W_CNT	(CURRENT_OOB_DONE | \
+					 CURRENT_HOT_PLUG_CNCT | \
+					 CURRENT_DEVICE_PRESENT)
+
+#define		DEVICE_ADDED_WO_CNT	(CURRENT_OOB_DONE | \
+					 CURRENT_DEVICE_PRESENT)
+
+#define 	DEVICE_REMOVED		CURRENT_LOSS_OF_SIGNAL
+
+#define		CURRENT_PHY_MASK	(CURRENT_OOB_DONE | \
+					 CURRENT_LOSS_OF_SIGNAL | \
+					 CURRENT_SPINUP_HOLD | \
+					 CURRENT_HOT_PLUG_CNCT | \
+					 CURRENT_GTO_TIMEOUT | \
+					 CURRENT_DEVICE_PRESENT | \
+					 CURRENT_OOB_ERROR )
+
+#define		CURRENT_ERR_MASK	(CURRENT_LOSS_OF_SIGNAL | \
+					 CURRENT_GTO_TIMEOUT | \
+					 CURRENT_OOB_TIMEOUT | \
+					 CURRENT_OOB_ERROR )
+
+#define SPEED_MASK	0x145
+
+#define		SATA_SPEED_30_DIS	0x10
+#define		SATA_SPEED_15_DIS	0x08
+#define		SAS_SPEED_60_DIS	0x04
+#define		SAS_SPEED_30_DIS	0x02
+#define		SAS_SPEED_15_DIS	0x01
+#define		SAS_SPEED_MASK_DEFAULT	0x00
+
+#define OOB_TIMER_ENABLE	0x14D
+
+#define		HOT_PLUG_EN		0x80
+#define		RCD_EN			0x40
+#define 	COMTIMER_EN		0x20
+#define		SNTT_EN			0x10
+#define		SNLT_EN			0x04
+#define		SNWT_EN			0x02
+#define		ALIGN_EN		0x01
+
+#define OOB_STATUS		0x14E
+
+#define		OOB_DONE		0x80
+#define		LOSS_OF_SIGNAL		0x40		/* ro */
+#define		SPINUP_HOLD		0x20
+#define		HOT_PLUG_CNCT		0x10		/* ro */
+#define		GTO_TIMEOUT		0x08		/* ro */
+#define		OOB_TIMEOUT		0x04		/* ro */
+#define		DEVICE_PRESENT		0x02		/* ro */
+#define		OOB_ERROR		0x01		/* ro */
+
+#define		OOB_STATUS_ERROR_MASK	(LOSS_OF_SIGNAL | GTO_TIMEOUT | \
+					 OOB_TIMEOUT | OOB_ERROR)
+
+#define OOB_STATUS_CLEAR	0x14F
+
+#define		OOB_DONE_CLR		0x80
+#define		LOSS_OF_SIGNAL_CLR 	0x40
+#define		SPINUP_HOLD_CLR		0x20
+#define		HOT_PLUG_CNCT_CLR     	0x10
+#define		GTO_TIMEOUT_CLR		0x08
+#define		OOB_TIMEOUT_CLR		0x04
+#define		OOB_ERROR_CLR		0x01
+
+#define HOT_PLUG_DELAY		0x150
+/* In 5 ms units. 20 = 100 ms. */
+#define	HOTPLUG_DELAY_TIMEOUT		20
+
+
+#define INT_ENABLE_2		0x15A
+
+#define		OOB_DONE_EN		0x80
+#define		LOSS_OF_SIGNAL_EN	0x40
+#define		SPINUP_HOLD_EN		0x20
+#define		HOT_PLUG_CNCT_EN	0x10
+#define		GTO_TIMEOUT_EN		0x08
+#define		OOB_TIMEOUT_EN		0x04
+#define		DEVICE_PRESENT_EN	0x02
+#define		OOB_ERROR_EN		0x01
+
+#define PHY_CONTROL_0		0x160
+
+#define		PHY_LOWPWREN_TX		0x80
+#define		PHY_LOWPWREN_RX		0x40
+#define		SPARE_REG_160_B5	0x20
+#define		OFFSET_CANCEL_RX	0x10
+
+/* bits 3:2 */
+#define		PHY_RXCOMCENTER_60V	0x00
+#define		PHY_RXCOMCENTER_70V	0x04
+#define		PHY_RXCOMCENTER_80V	0x08
+#define		PHY_RXCOMCENTER_90V	0x0C
+#define 	PHY_RXCOMCENTER_MASK	0x0C
+
+#define		PHY_RESET		0x02
+#define		SAS_DEFAULT_SEL		0x01
+
+#define PHY_CONTROL_1		0x161
+
+/* bits 2:0 */
+#define		SATA_PHY_DETLEVEL_50mv	0x00
+#define		SATA_PHY_DETLEVEL_75mv	0x01
+#define		SATA_PHY_DETLEVEL_100mv	0x02
+#define		SATA_PHY_DETLEVEL_125mv	0x03
+#define		SATA_PHY_DETLEVEL_150mv	0x04
+#define		SATA_PHY_DETLEVEL_175mv	0x05
+#define		SATA_PHY_DETLEVEL_200mv	0x06
+#define		SATA_PHY_DETLEVEL_225mv	0x07
+#define		SATA_PHY_DETLEVEL_MASK	0x07
+
+/* bits 5:3 */
+#define		SAS_PHY_DETLEVEL_50mv	0x00
+#define		SAS_PHY_DETLEVEL_75mv	0x08
+#define		SAS_PHY_DETLEVEL_100mv	0x10
+#define		SAS_PHY_DETLEVEL_125mv	0x11
+#define		SAS_PHY_DETLEVEL_150mv	0x20
+#define		SAS_PHY_DETLEVEL_175mv	0x21
+#define		SAS_PHY_DETLEVEL_200mv	0x30
+#define		SAS_PHY_DETLEVEL_225mv	0x31
+#define		SAS_PHY_DETLEVEL_MASK	0x38
+
+#define PHY_CONTROL_2		0x162
+
+/* bits 7:5 */
+#define 	SATA_PHY_DRV_400mv	0x00
+#define 	SATA_PHY_DRV_450mv	0x20
+#define 	SATA_PHY_DRV_500mv	0x40
+#define 	SATA_PHY_DRV_550mv	0x60
+#define 	SATA_PHY_DRV_600mv	0x80
+#define 	SATA_PHY_DRV_650mv	0xA0
+#define 	SATA_PHY_DRV_725mv	0xC0
+#define 	SATA_PHY_DRV_800mv	0xE0
+#define		SATA_PHY_DRV_MASK	0xE0
+
+/* bits 4:3 */
+#define 	SATA_PREEMP_0		0x00
+#define 	SATA_PREEMP_1		0x08
+#define 	SATA_PREEMP_2		0x10
+#define 	SATA_PREEMP_3		0x18
+#define 	SATA_PREEMP_MASK	0x18
+
+#define 	SATA_CMSH1P5		0x04
+
+/* bits 1:0 */
+#define 	SATA_SLEW_0		0x00
+#define 	SATA_SLEW_1		0x01
+#define 	SATA_SLEW_2		0x02
+#define 	SATA_SLEW_3		0x03
+#define 	SATA_SLEW_MASK		0x03
+
+#define PHY_CONTROL_3		0x163
+
+/* bits 7:5 */
+#define 	SAS_PHY_DRV_400mv	0x00
+#define 	SAS_PHY_DRV_450mv	0x20
+#define 	SAS_PHY_DRV_500mv	0x40
+#define 	SAS_PHY_DRV_550mv	0x60
+#define 	SAS_PHY_DRV_600mv	0x80
+#define 	SAS_PHY_DRV_650mv	0xA0
+#define 	SAS_PHY_DRV_725mv	0xC0
+#define 	SAS_PHY_DRV_800mv	0xE0
+#define		SAS_PHY_DRV_MASK	0xE0
+
+/* bits 4:3 */
+#define 	SAS_PREEMP_0		0x00
+#define 	SAS_PREEMP_1		0x08
+#define 	SAS_PREEMP_2		0x10
+#define 	SAS_PREEMP_3		0x18
+#define 	SAS_PREEMP_MASK		0x18
+
+#define 	SAS_CMSH1P5		0x04
+
+/* bits 1:0 */
+#define 	SAS_SLEW_0		0x00
+#define 	SAS_SLEW_1		0x01
+#define 	SAS_SLEW_2		0x02
+#define 	SAS_SLEW_3		0x03
+#define 	SAS_SLEW_MASK		0x03
+
+#define PHY_CONTROL_4		0x168
+
+#define		PHY_DONE_CAL_TX		0x80
+#define		PHY_DONE_CAL_RX		0x40
+#define		RX_TERM_LOAD_DIS	0x20
+#define		TX_TERM_LOAD_DIS	0x10
+#define		AUTO_TERM_CAL_DIS	0x08
+#define		PHY_SIGDET_FLTR_EN	0x04
+#define		OSC_FREQ		0x02
+#define		PHY_START_CAL		0x01
+
+/*
+ * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
+ */
+#define PCIX_REG_BASE_ADR		0xB8040000
+
+#define PCIC_VENDOR_ID	0x00
+
+#define PCIC_DEVICE_ID	0x02
+
+#define PCIC_COMMAND	0x04
+
+#define		INT_DIS			0x0400
+#define		FBB_EN			0x0200		/* ro */
+#define		SERR_EN			0x0100
+#define		STEP_EN			0x0080		/* ro */
+#define		PERR_EN			0x0040
+#define		VGA_EN			0x0020		/* ro */
+#define		MWI_EN			0x0010
+#define		SPC_EN			0x0008
+#define		MST_EN			0x0004
+#define		MEM_EN			0x0002
+#define		IO_EN			0x0001
+
+#define	PCIC_STATUS	0x06
+
+#define		PERR_DET		0x8000
+#define		SERR_GEN		0x4000
+#define		MABT_DET		0x2000
+#define		TABT_DET		0x1000
+#define		TABT_GEN		0x0800
+#define		DPERR_DET		0x0100
+#define		CAP_LIST		0x0010
+#define		INT_STAT		0x0008
+
+#define	PCIC_DEVREV_ID	0x08
+
+#define	PCIC_CLASS_CODE	0x09
+
+#define	PCIC_CACHELINE_SIZE	0x0C
+
+#define	PCIC_MBAR0	0x10
+
+#define 	PCIC_MBAR0_OFFSET	0
+
+#define	PCIC_MBAR1	0x18
+
+#define 	PCIC_MBAR1_OFFSET	2
+
+#define	PCIC_IOBAR	0x20
+
+#define 	PCIC_IOBAR_OFFSET	4
+
+#define	PCIC_SUBVENDOR_ID	0x2C
+
+#define PCIC_SUBSYTEM_ID	0x2E
+
+#define PCIX_STATUS		0x44
+#define 	RCV_SCE		0x20000000
+#define 	UNEXP_SC	0x00080000
+#define 	SC_DISCARD	0x00040000
+
+#define ECC_CTRL_STAT		0x48
+#define 	UNCOR_ECCERR	0x00000008
+
+#define PCIC_PM_CSR		0x5C
+
+#define		PWR_STATE_D0		0
+#define		PWR_STATE_D1		1	/* not supported */
+#define		PWR_STATE_D2		2 	/* not supported */
+#define		PWR_STATE_D3		3
+
+#define PCIC_BASE1	0x6C	/* internal use only */
+
+#define		BASE1_RSVD		0xFFFFFFF8
+
+#define PCIC_BASEA	0x70	/* internal use only */
+
+#define		BASEA_RSVD		0xFFFFFFC0
+#define 	BASEA_START		0
+
+#define PCIC_BASEB	0x74	/* internal use only */
+
+#define		BASEB_RSVD		0xFFFFFF80
+#define		BASEB_IOMAP_MASK	0x7F
+#define 	BASEB_START		0x80
+
+#define PCIC_BASEC	0x78	/* internal use only */
+
+#define		BASEC_RSVD		0xFFFFFFFC
+#define 	BASEC_MASK		0x03
+#define 	BASEC_START		0x58
+
+#define PCIC_MBAR_KEY	0x7C	/* internal use only */
+
+#define 	MBAR_KEY_MASK		0xFFFFFFFF
+
+#define PCIC_HSTPCIX_CNTRL	0xA0
+
+#define 	REWIND_DIS		0x0800
+#define		SC_TMR_DIS		0x04000000
+
+#define PCIC_MBAR0_MASK	0xA8
+#define		PCIC_MBAR0_SIZE_MASK 	0x1FFFE000
+#define		PCIC_MBAR0_SIZE_SHIFT 	13
+#define		PCIC_MBAR0_SIZE(val)	\
+		    (((val) & PCIC_MBAR0_SIZE_MASK) >> PCIC_MBAR0_SIZE_SHIFT)
+
+#define PCIC_FLASH_MBAR	0xB8
+
+#define PCIC_INTRPT_STAT 0xD4
+
+#define PCIC_TP_CTRL	0xFC
+
+/*
+ * EXSI Registers, Addresss Range: (0x00-0xFC)
+ */
+#define EXSI_REG_BASE_ADR		REG_BASE_ADDR_EXSI
+
+#define	EXSICNFGR	(EXSI_REG_BASE_ADR + 0x00)
+
+#define		OCMINITIALIZED		0x80000000
+#define		ASIEN			0x00400000
+#define		HCMODE			0x00200000
+#define		PCIDEF			0x00100000
+#define		COMSTOCK		0x00080000
+#define		SEEPROMEND		0x00040000
+#define		MSTTIMEN		0x00020000
+#define		XREGEX			0x00000200
+#define		NVRAMW			0x00000100
+#define		NVRAMEX			0x00000080
+#define		SRAMW			0x00000040
+#define		SRAMEX			0x00000020
+#define		FLASHW			0x00000010
+#define		FLASHEX			0x00000008
+#define		SEEPROMCFG		0x00000004
+#define		SEEPROMTYP		0x00000002
+#define		SEEPROMEX		0x00000001
+
+
+#define EXSICNTRLR	(EXSI_REG_BASE_ADR + 0x04)
+
+#define		MODINT_EN		0x00000001
+
+
+#define PMSTATR		(EXSI_REG_BASE_ADR + 0x10)
+
+#define		FLASHRST		0x00000002
+#define		FLASHRDY		0x00000001
+
+
+#define FLCNFGR		(EXSI_REG_BASE_ADR + 0x14)
+
+#define		FLWEH_MASK		0x30000000
+#define		FLWESU_MASK		0x0C000000
+#define		FLWEPW_MASK		0x03F00000
+#define		FLOEH_MASK		0x000C0000
+#define 	FLOESU_MASK		0x00030000
+#define 	FLOEPW_MASK		0x0000FC00
+#define 	FLCSH_MASK		0x00000300
+#define 	FLCSSU_MASK		0x000000C0
+#define 	FLCSPW_MASK		0x0000003F
+
+#define SRCNFGR		(EXSI_REG_BASE_ADR + 0x18)
+
+#define		SRWEH_MASK		0x30000000
+#define		SRWESU_MASK		0x0C000000
+#define		SRWEPW_MASK		0x03F00000
+
+#define		SROEH_MASK		0x000C0000
+#define 	SROESU_MASK		0x00030000
+#define 	SROEPW_MASK		0x0000FC00
+#define		SRCSH_MASK		0x00000300
+#define		SRCSSU_MASK		0x000000C0
+#define		SRCSPW_MASK		0x0000003F
+
+#define NVCNFGR		(EXSI_REG_BASE_ADR + 0x1C)
+
+#define 	NVWEH_MASK		0x30000000
+#define 	NVWESU_MASK		0x0C000000
+#define 	NVWEPW_MASK		0x03F00000
+#define 	NVOEH_MASK		0x000C0000
+#define 	NVOESU_MASK		0x00030000
+#define 	NVOEPW_MASK		0x0000FC00
+#define 	NVCSH_MASK		0x00000300
+#define 	NVCSSU_MASK		0x000000C0
+#define 	NVCSPW_MASK		0x0000003F
+
+#define XRCNFGR		(EXSI_REG_BASE_ADR + 0x20)
+
+#define 	XRWEH_MASK		0x30000000
+#define 	XRWESU_MASK		0x0C000000
+#define 	XRWEPW_MASK		0x03F00000
+#define 	XROEH_MASK		0x000C0000
+#define 	XROESU_MASK		0x00030000
+#define 	XROEPW_MASK		0x0000FC00
+#define 	XRCSH_MASK		0x00000300
+#define 	XRCSSU_MASK		0x000000C0
+#define		XRCSPW_MASK		0x0000003F
+
+#define XREGADDR	(EXSI_REG_BASE_ADR + 0x24)
+
+#define 	XRADDRINCEN		0x80000000
+#define 	XREGADD_MASK		0x007FFFFF
+
+
+#define XREGDATAR	(EXSI_REG_BASE_ADR + 0x28)
+
+#define		XREGDATA_MASK 		0x0000FFFF
+
+#define GPIOOER		(EXSI_REG_BASE_ADR + 0x40)
+
+#define GPIOODENR	(EXSI_REG_BASE_ADR + 0x44)
+
+#define GPIOINVR	(EXSI_REG_BASE_ADR + 0x48)
+
+#define GPIODATAOR	(EXSI_REG_BASE_ADR + 0x4C)
+
+#define GPIODATAIR	(EXSI_REG_BASE_ADR + 0x50)
+
+#define GPIOCNFGR	(EXSI_REG_BASE_ADR + 0x54)
+
+#define		GPIO_EXTSRC		0x00000001
+
+#define SCNTRLR		(EXSI_REG_BASE_ADR + 0xA0)
+
+#define 	SXFERDONE		0x00000100
+#define 	SXFERCNT_MASK		0x000000E0
+#define 	SCMDTYP_MASK		0x0000001C
+#define 	SXFERSTART		0x00000002
+#define 	SXFEREN			0x00000001
+
+#define	SRATER		(EXSI_REG_BASE_ADR + 0xA4)
+
+#define	SADDRR		(EXSI_REG_BASE_ADR + 0xA8)
+
+#define 	SADDR_MASK		0x0000FFFF
+
+#define SDATAOR		(EXSI_REG_BASE_ADR + 0xAC)
+
+#define	SDATAOR0	(EXSI_REG_BASE_ADR + 0xAC)
+#define SDATAOR1	(EXSI_REG_BASE_ADR + 0xAD)
+#define SDATAOR2	(EXSI_REG_BASE_ADR + 0xAE)
+#define SDATAOR3	(EXSI_REG_BASE_ADR + 0xAF)
+
+#define SDATAIR		(EXSI_REG_BASE_ADR + 0xB0)
+
+#define SDATAIR0	(EXSI_REG_BASE_ADR + 0xB0)
+#define SDATAIR1	(EXSI_REG_BASE_ADR + 0xB1)
+#define SDATAIR2	(EXSI_REG_BASE_ADR + 0xB2)
+#define SDATAIR3	(EXSI_REG_BASE_ADR + 0xB3)
+
+#define ASISTAT0R	(EXSI_REG_BASE_ADR + 0xD0)
+#define 	ASIFMTERR		0x00000400
+#define 	ASISEECHKERR		0x00000200
+#define 	ASIERR			0x00000100
+
+#define ASISTAT1R	(EXSI_REG_BASE_ADR + 0xD4)
+#define 	CHECKSUM_MASK		0x0000FFFF
+
+#define ASIERRADDR	(EXSI_REG_BASE_ADR + 0xD8)
+#define ASIERRDATAR	(EXSI_REG_BASE_ADR + 0xDC)
+#define ASIERRSTATR	(EXSI_REG_BASE_ADR + 0xE0)
+#define 	CPI2ASIBYTECNT_MASK	0x00070000
+#define 	CPI2ASIBYTEEN_MASK      0x0000F000
+#define 	CPI2ASITARGERR_MASK	0x00000F00
+#define 	CPI2ASITARGMID_MASK	0x000000F0
+#define 	CPI2ASIMSTERR_MASK	0x0000000F
+
+/*
+ * XSRAM, External SRAM (DWord and any BE pattern accessible)
+ */
+#define XSRAM_REG_BASE_ADDR             0xB8100000
+#define XSRAM_SIZE                        0x100000
+
+/*
+ * NVRAM Registers, Address Range: (0x00000 - 0x3FFFF).
+ */
+#define		NVRAM_REG_BASE_ADR	0xBF800000
+#define		NVRAM_MAX_BASE_ADR	0x003FFFFF
+
+/* OCM base address */
+#define		OCM_BASE_ADDR		0xA0000000
+#define		OCM_MAX_SIZE		0x20000
+
+/*
+ * Sequencers (Central and Link) Scratch RAM page definitions.
+ */
+
+/*
+ * The Central Management Sequencer (CSEQ) Scratch Memory is a 1024
+ * byte memory.  It is dword accessible and has byte parity
+ * protection. The CSEQ accesses it in 32 byte windows, either as mode
+ * dependent or mode independent memory. Each mode has 96 bytes,
+ * (three 32 byte pages 0-2, not contiguous), leaving 128 bytes of
+ * Mode Independent memory (four 32 byte pages 3-7). Note that mode
+ * dependent scratch memory, Mode 8, page 0-3 overlaps mode
+ * independent scratch memory, pages 0-3.
+ * - 896 bytes of mode dependent scratch, 96 bytes per Modes 0-7, and
+ * 128 bytes in mode 8,
+ * - 259 bytes of mode independent scratch, common to modes 0-15.
+ *
+ * Sequencer scratch RAM is 1024 bytes.  This scratch memory is
+ * divided into mode dependent and mode independent scratch with this
+ * memory further subdivided into pages of size 32 bytes. There are 5
+ * pages (160 bytes) of mode independent scratch and 3 pages of
+ * dependent scratch memory for modes 0-7 (768 bytes). Mode 8 pages
+ * 0-2 dependent scratch overlap with pages 0-2 of mode independent
+ * scratch memory.
+ *
+ * The host accesses this scratch in a different manner from the
+ * central sequencer. The sequencer has to use CSEQ registers CSCRPAGE
+ * and CMnSCRPAGE to access the scratch memory. A flat mapping of the
+ * scratch memory is avaliable for software convenience and to prevent
+ * corruption while the sequencer is running. This memory is mapped
+ * onto addresses 800h - BFFh, total of 400h bytes.
+ *
+ * These addresses are mapped as follows:
+ *
+ *        800h-83Fh   Mode Dependent Scratch Mode 0 Pages 0-1
+ *        840h-87Fh   Mode Dependent Scratch Mode 1 Pages 0-1
+ *        880h-8BFh   Mode Dependent Scratch Mode 2 Pages 0-1
+ *        8C0h-8FFh   Mode Dependent Scratch Mode 3 Pages 0-1
+ *        900h-93Fh   Mode Dependent Scratch Mode 4 Pages 0-1
+ *        940h-97Fh   Mode Dependent Scratch Mode 5 Pages 0-1
+ *        980h-9BFh   Mode Dependent Scratch Mode 6 Pages 0-1
+ *        9C0h-9FFh   Mode Dependent Scratch Mode 7 Pages 0-1
+ *        A00h-A5Fh   Mode Dependent Scratch Mode 8 Pages 0-2
+ *                    Mode Independent Scratch Pages 0-2
+ *        A60h-A7Fh   Mode Dependent Scratch Mode 8 Page 3
+ *                    Mode Independent Scratch Page 3
+ *        A80h-AFFh   Mode Independent Scratch Pages 4-7
+ *        B00h-B1Fh   Mode Dependent Scratch Mode 0 Page 2
+ *        B20h-B3Fh   Mode Dependent Scratch Mode 1 Page 2
+ *        B40h-B5Fh   Mode Dependent Scratch Mode 2 Page 2
+ *        B60h-B7Fh   Mode Dependent Scratch Mode 3 Page 2
+ *        B80h-B9Fh   Mode Dependent Scratch Mode 4 Page 2
+ *        BA0h-BBFh   Mode Dependent Scratch Mode 5 Page 2
+ *        BC0h-BDFh   Mode Dependent Scratch Mode 6 Page 2
+ *        BE0h-BFFh   Mode Dependent Scratch Mode 7 Page 2
+ */
+
+/* General macros */
+#define CSEQ_PAGE_SIZE			32  /* Scratch page size (in bytes) */
+
+/* All macros start with offsets from base + 0x800 (CMAPPEDSCR).
+ * Mode dependent scratch page 0, mode 0.
+ * For modes 1-7 you have to do arithmetic. */
+#define CSEQ_LRM_SAVE_SINDEX		(CMAPPEDSCR + 0x0000)
+#define CSEQ_LRM_SAVE_SCBPTR		(CMAPPEDSCR + 0x0002)
+#define CSEQ_Q_LINK_HEAD		(CMAPPEDSCR + 0x0004)
+#define CSEQ_Q_LINK_TAIL		(CMAPPEDSCR + 0x0006)
+#define CSEQ_LRM_SAVE_SCRPAGE		(CMAPPEDSCR + 0x0008)
+
+/* Mode dependent scratch page 0 mode 8 macros. */
+#define CSEQ_RET_ADDR			(CMAPPEDSCR + 0x0200)
+#define CSEQ_RET_SCBPTR			(CMAPPEDSCR + 0x0202)
+#define CSEQ_SAVE_SCBPTR		(CMAPPEDSCR + 0x0204)
+#define CSEQ_EMPTY_TRANS_CTX		(CMAPPEDSCR + 0x0206)
+#define CSEQ_RESP_LEN			(CMAPPEDSCR + 0x0208)
+#define CSEQ_TMF_SCBPTR			(CMAPPEDSCR + 0x020A)
+#define CSEQ_GLOBAL_PREV_SCB		(CMAPPEDSCR + 0x020C)
+#define CSEQ_GLOBAL_HEAD		(CMAPPEDSCR + 0x020E)
+#define CSEQ_CLEAR_LU_HEAD		(CMAPPEDSCR + 0x0210)
+#define CSEQ_TMF_OPCODE			(CMAPPEDSCR + 0x0212)
+#define CSEQ_SCRATCH_FLAGS		(CMAPPEDSCR + 0x0213)
+#define CSEQ_HSB_SITE                   (CMAPPEDSCR + 0x021A)
+#define CSEQ_FIRST_INV_SCB_SITE		(CMAPPEDSCR + 0x021C)
+#define CSEQ_FIRST_INV_DDB_SITE		(CMAPPEDSCR + 0x021E)
+
+/* Mode dependent scratch page 1 mode 8 macros. */
+#define CSEQ_LUN_TO_CLEAR		(CMAPPEDSCR + 0x0220)
+#define CSEQ_LUN_TO_CHECK		(CMAPPEDSCR + 0x0228)
+
+/* Mode dependent scratch page 2 mode 8 macros */
+#define CSEQ_HQ_NEW_POINTER		(CMAPPEDSCR + 0x0240)
+#define CSEQ_HQ_DONE_BASE		(CMAPPEDSCR + 0x0248)
+#define CSEQ_HQ_DONE_POINTER		(CMAPPEDSCR + 0x0250)
+#define CSEQ_HQ_DONE_PASS		(CMAPPEDSCR + 0x0254)
+
+/* Mode independent scratch page 4 macros. */
+#define CSEQ_Q_EXE_HEAD			(CMAPPEDSCR + 0x0280)
+#define CSEQ_Q_EXE_TAIL			(CMAPPEDSCR + 0x0282)
+#define CSEQ_Q_DONE_HEAD                (CMAPPEDSCR + 0x0284)
+#define CSEQ_Q_DONE_TAIL                (CMAPPEDSCR + 0x0286)
+#define CSEQ_Q_SEND_HEAD		(CMAPPEDSCR + 0x0288)
+#define CSEQ_Q_SEND_TAIL		(CMAPPEDSCR + 0x028A)
+#define CSEQ_Q_DMA2CHIM_HEAD		(CMAPPEDSCR + 0x028C)
+#define CSEQ_Q_DMA2CHIM_TAIL		(CMAPPEDSCR + 0x028E)
+#define CSEQ_Q_COPY_HEAD		(CMAPPEDSCR + 0x0290)
+#define CSEQ_Q_COPY_TAIL		(CMAPPEDSCR + 0x0292)
+#define CSEQ_REG0			(CMAPPEDSCR + 0x0294)
+#define CSEQ_REG1			(CMAPPEDSCR + 0x0296)
+#define CSEQ_REG2			(CMAPPEDSCR + 0x0298)
+#define CSEQ_LINK_CTL_Q_MAP		(CMAPPEDSCR + 0x029C)
+#define CSEQ_MAX_CSEQ_MODE		(CMAPPEDSCR + 0x029D)
+#define CSEQ_FREE_LIST_HACK_COUNT	(CMAPPEDSCR + 0x029E)
+
+/* Mode independent scratch page 5 macros. */
+#define CSEQ_EST_NEXUS_REQ_QUEUE	(CMAPPEDSCR + 0x02A0)
+#define CSEQ_EST_NEXUS_REQ_COUNT	(CMAPPEDSCR + 0x02A8)
+#define CSEQ_Q_EST_NEXUS_HEAD		(CMAPPEDSCR + 0x02B0)
+#define CSEQ_Q_EST_NEXUS_TAIL		(CMAPPEDSCR + 0x02B2)
+#define CSEQ_NEED_EST_NEXUS_SCB		(CMAPPEDSCR + 0x02B4)
+#define CSEQ_EST_NEXUS_REQ_HEAD		(CMAPPEDSCR + 0x02B6)
+#define CSEQ_EST_NEXUS_REQ_TAIL		(CMAPPEDSCR + 0x02B7)
+#define CSEQ_EST_NEXUS_SCB_OFFSET	(CMAPPEDSCR + 0x02B8)
+
+/* Mode independent scratch page 6 macros. */
+#define CSEQ_INT_ROUT_RET_ADDR0		(CMAPPEDSCR + 0x02C0)
+#define CSEQ_INT_ROUT_RET_ADDR1		(CMAPPEDSCR + 0x02C2)
+#define CSEQ_INT_ROUT_SCBPTR		(CMAPPEDSCR + 0x02C4)
+#define CSEQ_INT_ROUT_MODE		(CMAPPEDSCR + 0x02C6)
+#define CSEQ_ISR_SCRATCH_FLAGS		(CMAPPEDSCR + 0x02C7)
+#define CSEQ_ISR_SAVE_SINDEX		(CMAPPEDSCR + 0x02C8)
+#define CSEQ_ISR_SAVE_DINDEX		(CMAPPEDSCR + 0x02CA)
+#define CSEQ_Q_MONIRTT_HEAD		(CMAPPEDSCR + 0x02D0)
+#define CSEQ_Q_MONIRTT_TAIL		(CMAPPEDSCR + 0x02D2)
+#define CSEQ_FREE_SCB_MASK		(CMAPPEDSCR + 0x02D5)
+#define CSEQ_BUILTIN_FREE_SCB_HEAD	(CMAPPEDSCR + 0x02D6)
+#define CSEQ_BUILTIN_FREE_SCB_TAIL	(CMAPPEDSCR + 0x02D8)
+#define CSEQ_EXTENDED_FREE_SCB_HEAD	(CMAPPEDSCR + 0x02DA)
+#define CSEQ_EXTENDED_FREE_SCB_TAIL	(CMAPPEDSCR + 0x02DC)
+
+/* Mode independent scratch page 7 macros. */
+#define CSEQ_EMPTY_REQ_QUEUE		(CMAPPEDSCR + 0x02E0)
+#define CSEQ_EMPTY_REQ_COUNT		(CMAPPEDSCR + 0x02E8)
+#define CSEQ_Q_EMPTY_HEAD		(CMAPPEDSCR + 0x02F0)
+#define CSEQ_Q_EMPTY_TAIL		(CMAPPEDSCR + 0x02F2)
+#define CSEQ_NEED_EMPTY_SCB		(CMAPPEDSCR + 0x02F4)
+#define CSEQ_EMPTY_REQ_HEAD		(CMAPPEDSCR + 0x02F6)
+#define CSEQ_EMPTY_REQ_TAIL		(CMAPPEDSCR + 0x02F7)
+#define CSEQ_EMPTY_SCB_OFFSET		(CMAPPEDSCR + 0x02F8)
+#define CSEQ_PRIMITIVE_DATA		(CMAPPEDSCR + 0x02FA)
+#define CSEQ_TIMEOUT_CONST		(CMAPPEDSCR + 0x02FC)
+
+/***************************************************************************
+* Link m Sequencer scratch RAM is 512 bytes.
+* This scratch memory is divided into mode dependent and mode
+* independent scratch with this memory further subdivided into
+* pages of size 32 bytes. There are 4 pages (128 bytes) of
+* mode independent scratch and 4 pages of dependent scratch
+* memory for modes 0-2 (384 bytes).
+*
+* The host accesses this scratch in a different manner from the
+* link sequencer. The sequencer has to use LSEQ registers
+* LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat
+* mapping of the scratch memory is avaliable for software
+* convenience and to prevent corruption while the sequencer is
+* running. This memory is mapped onto addresses 800h - 9FFh.
+*
+* These addresses are mapped as follows:
+*
+*        800h-85Fh   Mode Dependent Scratch Mode 0 Pages 0-2
+*        860h-87Fh   Mode Dependent Scratch Mode 0 Page 3
+*                    Mode Dependent Scratch Mode 5 Page 0
+*        880h-8DFh   Mode Dependent Scratch Mode 1 Pages 0-2
+*        8E0h-8FFh   Mode Dependent Scratch Mode 1 Page 3
+*                    Mode Dependent Scratch Mode 5 Page 1
+*        900h-95Fh   Mode Dependent Scratch Mode 2 Pages 0-2
+*        960h-97Fh   Mode Dependent Scratch Mode 2 Page 3
+*                    Mode Dependent Scratch Mode 5 Page 2
+*        980h-9DFh   Mode Independent Scratch Pages 0-3
+*        9E0h-9FFh   Mode Independent Scratch Page 3
+*                    Mode Dependent Scratch Mode 5 Page 3
+*
+****************************************************************************/
+/* General macros */
+#define LSEQ_MODE_SCRATCH_SIZE		0x80 /* Size of scratch RAM per mode */
+#define LSEQ_PAGE_SIZE			0x20 /* Scratch page size (in bytes) */
+#define LSEQ_MODE5_PAGE0_OFFSET 	0x60
+
+/* Common mode dependent scratch page 0 macros for modes 0,1,2, and 5 */
+/* Indexed using LSEQ_MODE_SCRATCH_SIZE * mode, for modes 0,1,2. */
+#define LmSEQ_RET_ADDR(LinkNum)		(LmSCRATCH(LinkNum) + 0x0000)
+#define LmSEQ_REG0_MODE(LinkNum)	(LmSCRATCH(LinkNum) + 0x0002)
+#define LmSEQ_MODE_FLAGS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0004)
+
+/* Mode flag macros (byte 0) */
+#define		SAS_SAVECTX_OCCURRED		0x80
+#define		SAS_OOBSVC_OCCURRED		0x40
+#define		SAS_OOB_DEVICE_PRESENT		0x20
+#define		SAS_CFGHDR_OCCURRED		0x10
+#define		SAS_RCV_INTS_ARE_DISABLED	0x08
+#define		SAS_OOB_HOT_PLUG_CNCT		0x04
+#define		SAS_AWAIT_OPEN_CONNECTION	0x02
+#define		SAS_CFGCMPLT_OCCURRED		0x01
+
+/* Mode flag macros (byte 1) */
+#define		SAS_RLSSCB_OCCURRED		0x80
+#define		SAS_FORCED_HEADER_MISS		0x40
+
+#define LmSEQ_RET_ADDR2(LinkNum)	(LmSCRATCH(LinkNum) + 0x0006)
+#define LmSEQ_RET_ADDR1(LinkNum)	(LmSCRATCH(LinkNum) + 0x0008)
+#define LmSEQ_OPCODE_TO_CSEQ(LinkNum)	(LmSCRATCH(LinkNum) + 0x000B)
+#define LmSEQ_DATA_TO_CSEQ(LinkNum)	(LmSCRATCH(LinkNum) + 0x000C)
+
+/* Mode dependent scratch page 0 macros for mode 0 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_FIRST_INV_DDB_SITE(LinkNum)	(LmSCRATCH(LinkNum) + 0x000E)
+#define LmSEQ_EMPTY_TRANS_CTX(LinkNum)		(LmSCRATCH(LinkNum) + 0x0010)
+#define LmSEQ_RESP_LEN(LinkNum)			(LmSCRATCH(LinkNum) + 0x0012)
+#define LmSEQ_FIRST_INV_SCB_SITE(LinkNum)	(LmSCRATCH(LinkNum) + 0x0014)
+#define LmSEQ_INTEN_SAVE(LinkNum)		(LmSCRATCH(LinkNum) + 0x0016)
+#define LmSEQ_LINK_RST_FRM_LEN(LinkNum)		(LmSCRATCH(LinkNum) + 0x001A)
+#define LmSEQ_LINK_RST_PROTOCOL(LinkNum)	(LmSCRATCH(LinkNum) + 0x001B)
+#define LmSEQ_RESP_STATUS(LinkNum)		(LmSCRATCH(LinkNum) + 0x001C)
+#define LmSEQ_LAST_LOADED_SGE(LinkNum)		(LmSCRATCH(LinkNum) + 0x001D)
+#define LmSEQ_SAVE_SCBPTR(LinkNum)		(LmSCRATCH(LinkNum) + 0x001E)
+
+/* Mode dependent scratch page 0 macros for mode 1 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_Q_XMIT_HEAD(LinkNum)		(LmSCRATCH(LinkNum) + 0x008E)
+#define LmSEQ_M1_EMPTY_TRANS_CTX(LinkNum)	(LmSCRATCH(LinkNum) + 0x0090)
+#define LmSEQ_INI_CONN_TAG(LinkNum)		(LmSCRATCH(LinkNum) + 0x0092)
+#define LmSEQ_FAILED_OPEN_STATUS(LinkNum)	(LmSCRATCH(LinkNum) + 0x009A)
+#define LmSEQ_XMIT_REQUEST_TYPE(LinkNum)	(LmSCRATCH(LinkNum) + 0x009B)
+#define LmSEQ_M1_RESP_STATUS(LinkNum)		(LmSCRATCH(LinkNum) + 0x009C)
+#define LmSEQ_M1_LAST_LOADED_SGE(LinkNum)	(LmSCRATCH(LinkNum) + 0x009D)
+#define LmSEQ_M1_SAVE_SCBPTR(LinkNum)		(LmSCRATCH(LinkNum) + 0x009E)
+
+/* Mode dependent scratch page 0 macros for mode 2 (non-common) */
+#define LmSEQ_PORT_COUNTER(LinkNum)		(LmSCRATCH(LinkNum) + 0x010E)
+#define LmSEQ_PM_TABLE_PTR(LinkNum)		(LmSCRATCH(LinkNum) + 0x0110)
+#define LmSEQ_SATA_INTERLOCK_TMR_SAVE(LinkNum)	(LmSCRATCH(LinkNum) + 0x0112)
+#define LmSEQ_IP_BITL(LinkNum)			(LmSCRATCH(LinkNum) + 0x0114)
+#define LmSEQ_COPY_SMP_CONN_TAG(LinkNum)	(LmSCRATCH(LinkNum) + 0x0116)
+#define LmSEQ_P0M2_OFFS1AH(LinkNum)		(LmSCRATCH(LinkNum) + 0x011A)
+
+/* Mode dependent scratch page 0 macros for modes 4/5 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_SAVED_OOB_STATUS(LinkNum)		(LmSCRATCH(LinkNum) + 0x006E)
+#define LmSEQ_SAVED_OOB_MODE(LinkNum)		(LmSCRATCH(LinkNum) + 0x006F)
+#define LmSEQ_Q_LINK_HEAD(LinkNum)		(LmSCRATCH(LinkNum) + 0x0070)
+#define LmSEQ_LINK_RST_ERR(LinkNum)		(LmSCRATCH(LinkNum) + 0x0072)
+#define LmSEQ_SAVED_OOB_SIGNALS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0073)
+#define LmSEQ_SAS_RESET_MODE(LinkNum)		(LmSCRATCH(LinkNum) + 0x0074)
+#define LmSEQ_LINK_RESET_RETRY_COUNT(LinkNum)	(LmSCRATCH(LinkNum) + 0x0075)
+#define LmSEQ_NUM_LINK_RESET_RETRIES(LinkNum)	(LmSCRATCH(LinkNum) + 0x0076)
+#define LmSEQ_OOB_INT_ENABLES(LinkNum)		(LmSCRATCH(LinkNum) + 0x007A)
+#define LmSEQ_NOTIFY_TIMER_TIMEOUT(LinkNum)	(LmSCRATCH(LinkNum) + 0x007C)
+#define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum)	(LmSCRATCH(LinkNum) + 0x007E)
+
+/* Mode dependent scratch page 1, mode 0 and mode 1 */
+#define LmSEQ_SG_LIST_PTR_ADDR0(LinkNum)        (LmSCRATCH(LinkNum) + 0x0020)
+#define LmSEQ_SG_LIST_PTR_ADDR1(LinkNum)        (LmSCRATCH(LinkNum) + 0x0030)
+#define LmSEQ_M1_SG_LIST_PTR_ADDR0(LinkNum)     (LmSCRATCH(LinkNum) + 0x00A0)
+#define LmSEQ_M1_SG_LIST_PTR_ADDR1(LinkNum)     (LmSCRATCH(LinkNum) + 0x00B0)
+
+/* Mode dependent scratch page 1 macros for mode 2 */
+/* Absolute offsets */
+#define LmSEQ_INVALID_DWORD_COUNT(LinkNum)	(LmSCRATCH(LinkNum) + 0x0120)
+#define LmSEQ_DISPARITY_ERROR_COUNT(LinkNum) 	(LmSCRATCH(LinkNum) + 0x0124)
+#define LmSEQ_LOSS_OF_SYNC_COUNT(LinkNum)	(LmSCRATCH(LinkNum) + 0x0128)
+
+/* Mode dependent scratch page 1 macros for mode 4/5 */
+#define LmSEQ_FRAME_TYPE_MASK(LinkNum)	      (LmSCRATCH(LinkNum) + 0x00E0)
+#define LmSEQ_HASHED_DEST_ADDR_MASK(LinkNum)  (LmSCRATCH(LinkNum) + 0x00E1)
+#define LmSEQ_HASHED_SRC_ADDR_MASK_PRINT(LinkNum) (LmSCRATCH(LinkNum) + 0x00E4)
+#define LmSEQ_HASHED_SRC_ADDR_MASK(LinkNum)   (LmSCRATCH(LinkNum) + 0x00E5)
+#define LmSEQ_NUM_FILL_BYTES_MASK(LinkNum)    (LmSCRATCH(LinkNum) + 0x00EB)
+#define LmSEQ_TAG_MASK(LinkNum)		      (LmSCRATCH(LinkNum) + 0x00F0)
+#define LmSEQ_TARGET_PORT_XFER_TAG(LinkNum)   (LmSCRATCH(LinkNum) + 0x00F2)
+#define LmSEQ_DATA_OFFSET(LinkNum)	      (LmSCRATCH(LinkNum) + 0x00F4)
+
+/* Mode dependent scratch page 2 macros for mode 0 */
+/* Absolute offsets */
+#define LmSEQ_SMP_RCV_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0040)
+#define LmSEQ_DEVICE_BITS(LinkNum)		(LmSCRATCH(LinkNum) + 0x005B)
+#define LmSEQ_SDB_DDB(LinkNum)			(LmSCRATCH(LinkNum) + 0x005C)
+#define LmSEQ_SDB_NUM_TAGS(LinkNum)		(LmSCRATCH(LinkNum) + 0x005E)
+#define LmSEQ_SDB_CURR_TAG(LinkNum)		(LmSCRATCH(LinkNum) + 0x005F)
+
+/* Mode dependent scratch page 2 macros for mode 1 */
+/* Absolute offsets */
+/* byte 0 bits 1-0 are domain select. */
+#define LmSEQ_TX_ID_ADDR_FRAME(LinkNum)		(LmSCRATCH(LinkNum) + 0x00C0)
+#define LmSEQ_OPEN_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x00C8)
+#define LmSEQ_SRST_AS_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x00CC)
+#define LmSEQ_LAST_LOADED_SG_EL(LinkNum)	(LmSCRATCH(LinkNum) + 0x00D4)
+
+/* Mode dependent scratch page 2 macros for mode 2 */
+/* Absolute offsets */
+#define LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0140)
+#define LmSEQ_CLOSE_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0144)
+#define LmSEQ_BREAK_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0148)
+#define LmSEQ_DWS_RESET_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x014C)
+#define LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(LinkNum) \
+						(LmSCRATCH(LinkNum) + 0x0150)
+#define LmSEQ_MCTL_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0154)
+
+/* Mode dependent scratch page 2 macros for mode 5 */
+#define LmSEQ_COMINIT_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0160)
+#define LmSEQ_RCV_ID_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0164)
+#define LmSEQ_RCV_FIS_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0168)
+#define LmSEQ_DEV_PRES_TIMER_TERM_TS(LinkNum)	(LmSCRATCH(LinkNum) + 0x016C)
+
+/* Mode dependent scratch page 3 macros for modes 0 and 1 */
+/* None defined */
+
+/* Mode dependent scratch page 3 macros for modes 2 and 5 */
+/* None defined */
+
+/* Mode Independent Scratch page 0 macros. */
+#define LmSEQ_Q_TGTXFR_HEAD(LinkNum)	(LmSCRATCH(LinkNum) + 0x0180)
+#define LmSEQ_Q_TGTXFR_TAIL(LinkNum)	(LmSCRATCH(LinkNum) + 0x0182)
+#define LmSEQ_LINK_NUMBER(LinkNum)	(LmSCRATCH(LinkNum) + 0x0186)
+#define LmSEQ_SCRATCH_FLAGS(LinkNum)	(LmSCRATCH(LinkNum) + 0x0187)
+/*
+ * Currently only bit 0, SAS_DWSAQD, is used.
+ */
+#define		SAS_DWSAQD			0x01  /*
+						       * DWSSTATUS: DWSAQD
+						       * bit las read in ISR.
+						       */
+#define  LmSEQ_CONNECTION_STATE(LinkNum) (LmSCRATCH(LinkNum) + 0x0188)
+/* Connection states (byte 0) */
+#define		SAS_WE_OPENED_CS		0x01
+#define		SAS_DEVICE_OPENED_CS		0x02
+#define		SAS_WE_SENT_DONE_CS		0x04
+#define		SAS_DEVICE_SENT_DONE_CS		0x08
+#define		SAS_WE_SENT_CLOSE_CS		0x10
+#define		SAS_DEVICE_SENT_CLOSE_CS	0x20
+#define		SAS_WE_SENT_BREAK_CS		0x40
+#define		SAS_DEVICE_SENT_BREAK_CS	0x80
+/* Connection states (byte 1) */
+#define		SAS_OPN_TIMEOUT_OR_OPN_RJCT_CS	0x01
+#define		SAS_AIP_RECEIVED_CS		0x02
+#define		SAS_CREDIT_TIMEOUT_OCCURRED_CS	0x04
+#define		SAS_ACKNAK_TIMEOUT_OCCURRED_CS	0x08
+#define		SAS_SMPRSP_TIMEOUT_OCCURRED_CS	0x10
+#define		SAS_DONE_TIMEOUT_OCCURRED_CS	0x20
+/* Connection states (byte 2) */
+#define		SAS_SMP_RESPONSE_RECEIVED_CS	0x01
+#define		SAS_INTLK_TIMEOUT_OCCURRED_CS	0x02
+#define		SAS_DEVICE_SENT_DMAT_CS		0x04
+#define		SAS_DEVICE_SENT_SYNCSRST_CS	0x08
+#define		SAS_CLEARING_AFFILIATION_CS	0x20
+#define		SAS_RXTASK_ACTIVE_CS		0x40
+#define		SAS_TXTASK_ACTIVE_CS		0x80
+/* Connection states (byte 3) */
+#define		SAS_PHY_LOSS_OF_SIGNAL_CS	0x01
+#define		SAS_DWS_TIMER_EXPIRED_CS	0x02
+#define		SAS_LINK_RESET_NOT_COMPLETE_CS	0x04
+#define		SAS_PHY_DISABLED_CS		0x08
+#define		SAS_LINK_CTL_TASK_ACTIVE_CS	0x10
+#define		SAS_PHY_EVENT_TASK_ACTIVE_CS	0x20
+#define		SAS_DEVICE_SENT_ID_FRAME_CS	0x40
+#define		SAS_DEVICE_SENT_REG_FIS_CS	0x40
+#define		SAS_DEVICE_SENT_HARD_RESET_CS	0x80
+#define  	SAS_PHY_IS_DOWN_FLAGS	(SAS_PHY_LOSS_OF_SIGNAL_CS|\
+					 SAS_DWS_TIMER_EXPIRED_CS |\
+					 SAS_LINK_RESET_NOT_COMPLETE_CS|\
+					 SAS_PHY_DISABLED_CS)
+
+#define		SAS_LINK_CTL_PHY_EVENT_FLAGS   (SAS_LINK_CTL_TASK_ACTIVE_CS |\
+						SAS_PHY_EVENT_TASK_ACTIVE_CS |\
+						SAS_DEVICE_SENT_ID_FRAME_CS  |\
+						SAS_DEVICE_SENT_HARD_RESET_CS)
+
+#define LmSEQ_CONCTL(LinkNum)		(LmSCRATCH(LinkNum) + 0x018C)
+#define LmSEQ_CONSTAT(LinkNum)		(LmSCRATCH(LinkNum) + 0x018E)
+#define LmSEQ_CONNECTION_MODES(LinkNum)	(LmSCRATCH(LinkNum) + 0x018F)
+#define LmSEQ_REG1_ISR(LinkNum)		(LmSCRATCH(LinkNum) + 0x0192)
+#define LmSEQ_REG2_ISR(LinkNum)		(LmSCRATCH(LinkNum) + 0x0194)
+#define LmSEQ_REG3_ISR(LinkNum)		(LmSCRATCH(LinkNum) + 0x0196)
+#define LmSEQ_REG0_ISR(LinkNum)		(LmSCRATCH(LinkNum) + 0x0198)
+
+/* Mode independent scratch page 1 macros. */
+#define LmSEQ_EST_NEXUS_SCBPTR0(LinkNum)	(LmSCRATCH(LinkNum) + 0x01A0)
+#define LmSEQ_EST_NEXUS_SCBPTR1(LinkNum)	(LmSCRATCH(LinkNum) + 0x01A2)
+#define LmSEQ_EST_NEXUS_SCBPTR2(LinkNum)	(LmSCRATCH(LinkNum) + 0x01A4)
+#define LmSEQ_EST_NEXUS_SCBPTR3(LinkNum)	(LmSCRATCH(LinkNum) + 0x01A6)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE0(LinkNum)	(LmSCRATCH(LinkNum) + 0x01A8)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE1(LinkNum)	(LmSCRATCH(LinkNum) + 0x01A9)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE2(LinkNum)	(LmSCRATCH(LinkNum) + 0x01AA)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE3(LinkNum)	(LmSCRATCH(LinkNum) + 0x01AB)
+#define LmSEQ_EST_NEXUS_SCB_HEAD(LinkNum)	(LmSCRATCH(LinkNum) + 0x01AC)
+#define LmSEQ_EST_NEXUS_SCB_TAIL(LinkNum)	(LmSCRATCH(LinkNum) + 0x01AD)
+#define LmSEQ_EST_NEXUS_BUF_AVAIL(LinkNum)	(LmSCRATCH(LinkNum) + 0x01AE)
+#define LmSEQ_TIMEOUT_CONST(LinkNum)		(LmSCRATCH(LinkNum) + 0x01B8)
+#define LmSEQ_ISR_SAVE_SINDEX(LinkNum)	        (LmSCRATCH(LinkNum) + 0x01BC)
+#define LmSEQ_ISR_SAVE_DINDEX(LinkNum)	        (LmSCRATCH(LinkNum) + 0x01BE)
+
+/* Mode independent scratch page 2 macros. */
+#define LmSEQ_EMPTY_SCB_PTR0(LinkNum)	(LmSCRATCH(LinkNum) + 0x01C0)
+#define LmSEQ_EMPTY_SCB_PTR1(LinkNum)	(LmSCRATCH(LinkNum) + 0x01C2)
+#define LmSEQ_EMPTY_SCB_PTR2(LinkNum)	(LmSCRATCH(LinkNum) + 0x01C4)
+#define LmSEQ_EMPTY_SCB_PTR3(LinkNum)	(LmSCRATCH(LinkNum) + 0x01C6)
+#define LmSEQ_EMPTY_SCB_OPCD0(LinkNum)	(LmSCRATCH(LinkNum) + 0x01C8)
+#define LmSEQ_EMPTY_SCB_OPCD1(LinkNum)	(LmSCRATCH(LinkNum) + 0x01C9)
+#define LmSEQ_EMPTY_SCB_OPCD2(LinkNum)	(LmSCRATCH(LinkNum) + 0x01CA)
+#define LmSEQ_EMPTY_SCB_OPCD3(LinkNum)	(LmSCRATCH(LinkNum) + 0x01CB)
+#define LmSEQ_EMPTY_SCB_HEAD(LinkNum)	(LmSCRATCH(LinkNum) + 0x01CC)
+#define LmSEQ_EMPTY_SCB_TAIL(LinkNum)	(LmSCRATCH(LinkNum) + 0x01CD)
+#define LmSEQ_EMPTY_BUFS_AVAIL(LinkNum)	(LmSCRATCH(LinkNum) + 0x01CE)
+#define LmSEQ_ATA_SCR_REGS(LinkNum)	(LmSCRATCH(LinkNum) + 0x01D4)
+
+/* Mode independent scratch page 3 macros. */
+#define LmSEQ_DEV_PRES_TMR_TOUT_CONST(LinkNum)	(LmSCRATCH(LinkNum) + 0x01E0)
+#define LmSEQ_SATA_INTERLOCK_TIMEOUT(LinkNum)	(LmSCRATCH(LinkNum) + 0x01E4)
+#define LmSEQ_STP_SHUTDOWN_TIMEOUT(LinkNum)	(LmSCRATCH(LinkNum) + 0x01E8)
+#define LmSEQ_SRST_ASSERT_TIMEOUT(LinkNum)	(LmSCRATCH(LinkNum) + 0x01EC)
+#define LmSEQ_RCV_FIS_TIMEOUT(LinkNum)		(LmSCRATCH(LinkNum) + 0x01F0)
+#define LmSEQ_ONE_MILLISEC_TIMEOUT(LinkNum)	(LmSCRATCH(LinkNum) + 0x01F4)
+#define LmSEQ_TEN_MS_COMINIT_TIMEOUT(LinkNum)	(LmSCRATCH(LinkNum) + 0x01F8)
+#define LmSEQ_SMP_RCV_TIMEOUT(LinkNum)		(LmSCRATCH(LinkNum) + 0x01FC)
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
new file mode 100644
index 000000000000..64d231712345
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -0,0 +1,785 @@
+/*
+ * Aic94xx SAS/SATA driver SAS definitions and hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef _AIC94XX_SAS_H_
+#define _AIC94XX_SAS_H_
+
+#include <scsi/libsas.h>
+
+/* ---------- DDBs ---------- */
+/* DDBs are device descriptor blocks which describe a device in the
+ * domain that this sequencer can maintain low-level connections for
+ * us.  They are be 64 bytes.
+ */
+
+struct asd_ddb_ssp_smp_target_port {
+	u8     conn_type;	  /* byte 0 */
+#define DDB_TP_CONN_TYPE 0x81	  /* Initiator port and addr frame type 0x01 */
+
+	u8     conn_rate;
+	__be16 init_conn_tag;
+	u8     dest_sas_addr[8];  /* bytes 4-11 */
+
+	__le16 send_queue_head;
+	u8     sq_suspended;
+	u8     ddb_type;	  /* DDB_TYPE_TARGET */
+#define DDB_TYPE_UNUSED    0xFF
+#define DDB_TYPE_TARGET    0xFE
+#define DDB_TYPE_INITIATOR 0xFD
+#define DDB_TYPE_PM_PORT   0xFC
+
+	__le16 _r_a;
+	__be16 awt_def;
+
+	u8     compat_features;	  /* byte 20 */
+	u8     pathway_blocked_count;
+	__be16 arb_wait_time;
+	__be32 more_compat_features; /* byte 24 */
+
+	u8     conn_mask;
+	u8     flags;	  /* concurrent conn:2,2 and open:0(1) */
+#define CONCURRENT_CONN_SUPP 0x04
+#define OPEN_REQUIRED        0x01
+
+	u16    _r_b;
+	__le16 exec_queue_tail;
+	__le16 send_queue_tail;
+	__le16 sister_ddb;
+
+	__le16 _r_c;
+
+	u8     max_concurrent_conn;
+	u8     num_concurrent_conn;
+	u8     num_contexts;
+
+	u8     _r_d;
+
+	__le16 active_task_count;
+
+	u8     _r_e[9];
+
+	u8     itnl_reason;	  /* I_T nexus loss reason */
+
+	__le16 _r_f;
+
+	__le16 itnl_timeout;
+#define ITNL_TIMEOUT_CONST 0x7D0 /* 2 seconds */
+
+	__le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+struct asd_ddb_stp_sata_target_port {
+	u8     conn_type;	  /* byte 0 */
+	u8     conn_rate;
+	__be16 init_conn_tag;
+	u8     dest_sas_addr[8];  /* bytes 4-11 */
+
+	__le16 send_queue_head;
+	u8     sq_suspended;
+	u8     ddb_type;	  /* DDB_TYPE_TARGET */
+
+	__le16 _r_a;
+
+	__be16 awt_def;
+	u8     compat_features;	  /* byte 20 */
+	u8     pathway_blocked_count;
+	__be16 arb_wait_time;
+	__be32 more_compat_features; /* byte 24 */
+
+	u8     conn_mask;
+	u8     flags;	  /* concurrent conn:2,2 and open:0(1) */
+#define SATA_MULTIPORT     0x80
+#define SUPPORTS_AFFIL     0x40
+#define STP_AFFIL_POL      0x20
+
+	u8     _r_b;
+	u8     flags2;		  /* STP close policy:0 */
+#define STP_CL_POL_NO_TX    0x00
+#define STP_CL_POL_BTW_CMDS 0x01
+
+	__le16 exec_queue_tail;
+	__le16 send_queue_tail;
+	__le16 sister_ddb;
+	__le16 ata_cmd_scbptr;
+	__le32 sata_tag_alloc_mask;
+	__le16 active_task_count;
+	__le16 _r_c;
+	__le32 sata_sactive;
+	u8     num_sata_tags;
+	u8     sata_status;
+	u8     sata_ending_status;
+	u8     itnl_reason;	  /* I_T nexus loss reason */
+	__le16 ncq_data_scb_ptr;
+	__le16 itnl_timeout;
+	__le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_init_port, describes the device descriptor block
+ * of an initiator port (when the sequencer is operating in target mode).
+ * Bytes [0,11] and [20,27] are from the OPEN address frame.
+ * The sequencer allocates an initiator port DDB entry.
+ */
+struct asd_ddb_init_port {
+	u8     conn_type;	  /* byte 0 */
+	u8     conn_rate;
+	__be16 init_conn_tag;     /* BE */
+	u8     dest_sas_addr[8];
+	__le16 send_queue_head;   /* LE, byte 12 */
+	u8     sq_suspended;
+	u8     ddb_type;	  /* DDB_TYPE_INITIATOR */
+	__le16 _r_a;
+	__be16 awt_def;		  /* BE */
+	u8     compat_features;
+	u8     pathway_blocked_count;
+	__be16 arb_wait_time;	  /* BE */
+	__be32 more_compat_features; /* BE */
+	u8     conn_mask;
+	u8     flags;		  /* == 5 */
+	u16    _r_b;
+	__le16 exec_queue_tail;	  /* execution queue tail */
+	__le16 send_queue_tail;
+	__le16 sister_ddb;
+	__le16 init_resp_timeout; /* initiator response timeout */
+	__le32 _r_c;
+	__le16 active_tasks;	  /* active task count */
+	__le16 init_list;	  /* initiator list link pointer */
+	__le32 _r_d;
+	u8     max_conn_to[3]; /* from Conn-Disc mode page, in us, LE */
+	u8     itnl_reason;	  /* I_T nexus loss reason */
+	__le16 bus_inact_to; /* from Conn-Disc mode page, in 100 us, LE */
+	__le16 itnl_to;		  /* from the Protocol Specific Port Ctrl MP */
+	__le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_tag, describes a look-up table to be used
+ * by the sequencers.  SATA II, IDENTIFY DEVICE data, word 76, bit 8:
+ * NCQ support.  This table is used by the sequencers to find the
+ * corresponding SCB, given a SATA II tag value.
+ */
+struct asd_ddb_sata_tag {
+	__le16 scb_pointer[32];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_pm_table, describes a port number to
+ * connection handle look-up table.  SATA targets attached to a port
+ * multiplier require a 4-bit port number value.  There is one DDB
+ * entry of this type for each SATA port multiplier (sister DDB).
+ * Given a SATA PM port number, this table gives us the SATA PM Port
+ * DDB of the SATA port multiplier port (i.e. the SATA target
+ * discovered on the port).
+ */
+struct asd_ddb_sata_pm_table {
+	__le16 ddb_pointer[16];
+	__le16 _r_a[16];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_pm_port, describes the SATA port multiplier
+ * port format DDB.
+ */
+struct asd_ddb_sata_pm_port {
+	u8     _r_a[15];
+	u8     ddb_type;
+	u8     _r_b[13];
+	u8     pm_port_flags;
+#define PM_PORT_MASK  0xF0
+#define PM_PORT_SET   0x02
+	u8     _r_c[6];
+	__le16 sister_ddb;
+	__le16 ata_cmd_scbptr;
+	__le32 sata_tag_alloc_mask;
+	__le16 active_task_count;
+	__le16 parent_ddb;
+	__le32 sata_sactive;
+	u8     num_sata_tags;
+	u8     sata_status;
+	u8     sata_ending_status;
+	u8     _r_d[9];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_seq_shared, describes a DDB shared by the
+ * central and link sequencers.  port_map_by_links is indexed phy
+ * number [0,7]; each byte is a bit mask of all the phys that are in
+ * the same port as the indexed phy.
+ */
+struct asd_ddb_seq_shared {
+	__le16 q_free_ddb_head;
+	__le16 q_free_ddb_tail;
+	__le16 q_free_ddb_cnt;
+	__le16 q_used_ddb_head;
+	__le16 q_used_ddb_tail;
+	__le16 shared_mem_lock;
+	__le16 smp_conn_tag;
+	__le16 est_nexus_buf_cnt;
+	__le16 est_nexus_buf_thresh;
+	u32    _r_a;
+	u8     settable_max_contexts;
+	u8     _r_b[23];
+	u8     conn_not_active;
+	u8     phy_is_up;
+	u8     _r_c[8];
+	u8     port_map_by_links[8];
+} __attribute__ ((packed));
+
+/* ---------- SG Element ---------- */
+
+/* This struct sg_el, describes the hardware scatter gather buffer
+ * element.  All entries are little endian.  In an SCB, there are 2 of
+ * this, plus one more, called a link element of this indicating a
+ * sublist if needed.
+ *
+ * A link element has only the bus address set and the flags (DS) bit
+ * valid.  The bus address points to the start of the sublist.
+ *
+ * If a sublist is needed, then that sublist should also include the 2
+ * sg_el embedded in the SCB, in which case next_sg_offset is 32,
+ * since sizeof(sg_el) = 16; EOS should be 1 and EOL 0 in this case.
+ */
+struct sg_el {
+	__le64 bus_addr;
+	__le32 size;
+	__le16 _r;
+	u8     next_sg_offs;
+	u8     flags;
+#define ASD_SG_EL_DS_MASK   0x30
+#define ASD_SG_EL_DS_OCM    0x10
+#define ASD_SG_EL_DS_HM     0x00
+#define ASD_SG_EL_LIST_MASK 0xC0
+#define ASD_SG_EL_LIST_EOL  0x40
+#define ASD_SG_EL_LIST_EOS  0x80
+} __attribute__ ((packed));
+
+/* ---------- SCBs ---------- */
+
+/* An SCB (sequencer control block) is comprised of a common header
+ * and a task part, for a total of 128 bytes.  All fields are in LE
+ * order, unless otherwise noted.
+ */
+
+/* This struct scb_header, defines the SCB header format.
+ */
+struct scb_header {
+	__le64 next_scb;
+	__le16 index;		  /* transaction context */
+	u8     opcode;
+} __attribute__ ((packed));
+
+/* SCB opcodes: Execution queue
+ */
+#define INITIATE_SSP_TASK       0x00
+#define INITIATE_LONG_SSP_TASK  0x01
+#define INITIATE_BIDIR_SSP_TASK 0x02
+#define ABORT_TASK              0x03
+#define INITIATE_SSP_TMF        0x04
+#define SSP_TARG_GET_DATA       0x05
+#define SSP_TARG_GET_DATA_GOOD  0x06
+#define SSP_TARG_SEND_RESP      0x07
+#define QUERY_SSP_TASK          0x08
+#define INITIATE_ATA_TASK       0x09
+#define INITIATE_ATAPI_TASK     0x0a
+#define CONTROL_ATA_DEV         0x0b
+#define INITIATE_SMP_TASK       0x0c
+#define SMP_TARG_SEND_RESP      0x0f
+
+/* SCB opcodes: Send Queue
+ */
+#define SSP_TARG_SEND_DATA      0x40
+#define SSP_TARG_SEND_DATA_GOOD 0x41
+
+/* SCB opcodes: Link Queue
+ */
+#define CONTROL_PHY             0x80
+#define SEND_PRIMITIVE          0x81
+#define INITIATE_LINK_ADM_TASK  0x82
+
+/* SCB opcodes: other
+ */
+#define EMPTY_SCB               0xc0
+#define INITIATE_SEQ_ADM_TASK   0xc1
+#define EST_ICL_TARG_WINDOW     0xc2
+#define COPY_MEM                0xc3
+#define CLEAR_NEXUS             0xc4
+#define INITIATE_DDB_ADM_TASK   0xc6
+#define ESTABLISH_NEXUS_ESCB    0xd0
+
+#define LUN_SIZE                8
+
+/* See SAS spec, task IU
+ */
+struct ssp_task_iu {
+	u8     lun[LUN_SIZE];	  /* BE */
+	u16    _r_a;
+	u8     tmf;
+	u8     _r_b;
+	__be16 tag;		  /* BE */
+	u8     _r_c[14];
+} __attribute__ ((packed));
+
+/* See SAS spec, command IU
+ */
+struct ssp_command_iu {
+	u8     lun[LUN_SIZE];
+	u8     _r_a;
+	u8     efb_prio_attr;	  /* enable first burst, task prio & attr */
+#define EFB_MASK        0x80
+#define TASK_PRIO_MASK	0x78
+#define TASK_ATTR_MASK  0x07
+
+	u8    _r_b;
+	u8     add_cdb_len;	  /* in dwords, since bit 0,1 are reserved */
+	union {
+		u8     cdb[16];
+		struct {
+			__le64 long_cdb_addr;	  /* bus address, LE */
+			__le32 long_cdb_size;	  /* LE */
+			u8     _r_c[3];
+			u8     eol_ds;		  /* eol:6,6, ds:5,4 */
+		} long_cdb;	  /* sequencer extension */
+	};
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+	__be32 requested_offset;  /* BE */
+	__be32 write_data_len;	  /* BE */
+	__be32 _r_a;
+} __attribute__ ((packed));
+
+/* ---------- SCB tasks ---------- */
+
+/* This is both ssp_task and long_ssp_task
+ */
+struct initiate_ssp_task {
+	u8     proto_conn_rate;	  /* proto:6,4, conn_rate:3,0 */
+	__le32 total_xfer_len;
+	struct ssp_frame_hdr  ssp_frame;
+	struct ssp_command_iu ssp_cmd;
+	__le16 sister_scb;	  /* 0xFFFF */
+	__le16 conn_handle;	  /* index to DDB for the intended target */
+	u8     data_dir;	  /* :1,0 */
+#define DATA_DIR_NONE   0x00
+#define DATA_DIR_IN     0x01
+#define DATA_DIR_OUT    0x02
+#define DATA_DIR_BYRECIPIENT 0x03
+
+	u8     _r_a;
+	u8     retry_count;
+	u8     _r_b[5];
+	struct sg_el sg_element[3]; /* 2 real and 1 link */
+} __attribute__ ((packed));
+
+/* This defines both ata_task and atapi_task.
+ * ata: C bit of FIS should be 1,
+ * atapi: C bit of FIS should be 1, and command register should be 0xA0,
+ * to indicate a packet command.
+ */
+struct initiate_ata_task {
+	u8     proto_conn_rate;
+	__le32 total_xfer_len;
+	struct host_to_dev_fis fis;
+	__le32 data_offs;
+	u8     atapi_packet[16];
+	u8     _r_a[12];
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     ata_flags;	  /* CSMI:6,6, DTM:4,4, QT:3,3, data dir:1,0 */
+#define CSMI_TASK           0x40
+#define DATA_XFER_MODE_DMA  0x10
+#define ATA_Q_TYPE_MASK     0x08
+#define	ATA_Q_TYPE_UNTAGGED 0x00
+#define ATA_Q_TYPE_NCQ      0x08
+
+	u8     _r_b;
+	u8     retry_count;
+	u8     _r_c;
+	u8     flags;
+#define STP_AFFIL_POLICY   0x20
+#define SET_AFFIL_POLICY   0x10
+#define RET_PARTIAL_SGLIST 0x02
+
+	u8     _r_d[3];
+	struct sg_el sg_element[3];
+} __attribute__ ((packed));
+
+struct initiate_smp_task {
+	u8     proto_conn_rate;
+	u8     _r_a[40];
+	struct sg_el smp_req;
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     _r_c[8];
+	struct sg_el smp_resp;
+	u8     _r_d[32];
+} __attribute__ ((packed));
+
+struct control_phy {
+	u8     phy_id;
+	u8     sub_func;
+#define DISABLE_PHY            0x00
+#define ENABLE_PHY             0x01
+#define RELEASE_SPINUP_HOLD    0x02
+#define ENABLE_PHY_NO_SAS_OOB  0x03
+#define ENABLE_PHY_NO_SATA_OOB 0x04
+#define PHY_NO_OP              0x05
+#define EXECUTE_HARD_RESET     0x81
+
+	u8     func_mask;
+	u8     speed_mask;
+	u8     hot_plug_delay;
+	u8     port_type;
+	u8     flags;
+#define DEV_PRES_TIMER_OVERRIDE_ENABLE 0x01
+#define DISABLE_PHY_IF_OOB_FAILS       0x02
+
+	__le32 timeout_override;
+	u8     link_reset_retries;
+	u8     _r_a[47];
+	__le16 conn_handle;
+	u8     _r_b[56];
+} __attribute__ ((packed));
+
+struct control_ata_dev {
+	u8     proto_conn_rate;
+	__le32 _r_a;
+	struct host_to_dev_fis fis;
+	u8     _r_b[32];
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     ata_flags;	  /* 0 */
+	u8     _r_c[55];
+} __attribute__ ((packed));
+
+struct empty_scb {
+	u8     num_valid;
+	__le32 _r_a;
+#define ASD_EDBS_PER_SCB 7
+/* header+data+CRC+DMA suffix data */
+#define ASD_EDB_SIZE (24+1024+4+16)
+	struct sg_el eb[ASD_EDBS_PER_SCB];
+#define ELEMENT_NOT_VALID  0xC0
+} __attribute__ ((packed));
+
+struct initiate_link_adm {
+	u8     phy_id;
+	u8     sub_func;
+#define GET_LINK_ERROR_COUNT      0x00
+#define RESET_LINK_ERROR_COUNT    0x01
+#define ENABLE_NOTIFY_SPINUP_INTS 0x02
+
+	u8     _r_a[57];
+	__le16 conn_handle;
+	u8     _r_b[56];
+} __attribute__ ((packed));
+
+struct copy_memory {
+	u8     _r_a;
+	__le16 xfer_len;
+	__le16 _r_b;
+	__le64 src_busaddr;
+	u8     src_ds;		  /* See definition of sg_el */
+	u8     _r_c[45];
+	__le16 conn_handle;
+	__le64 _r_d;
+	__le64 dest_busaddr;
+	u8     dest_ds;		  /* See definition of sg_el */
+	u8     _r_e[39];
+} __attribute__ ((packed));
+
+struct abort_task {
+	u8     proto_conn_rate;
+	__le32 _r_a;
+	struct ssp_frame_hdr ssp_frame;
+	struct ssp_task_iu ssp_task;
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     flags;	  /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
+#define SUSPEND_DATA_TRANS 0x04
+
+	u8     _r_b;
+	u8     retry_count;
+	u8     _r_c[5];
+	__le16 index;  /* Transaction context of task to be queried */
+	__le16 itnl_to;
+	u8     _r_d[44];
+} __attribute__ ((packed));
+
+struct clear_nexus {
+	u8     nexus;
+#define NEXUS_ADAPTER  0x00
+#define NEXUS_PORT     0x01
+#define NEXUS_I_T      0x02
+#define NEXUS_I_T_L    0x03
+#define NEXUS_TAG      0x04
+#define NEXUS_TRANS_CX 0x05
+#define NEXUS_SATA_TAG 0x06
+#define NEXUS_T_L      0x07
+#define NEXUS_L        0x08
+#define NEXUS_T_TAG    0x09
+
+	__le32 _r_a;
+	u8     flags;
+#define SUSPEND_TX     0x80
+#define RESUME_TX      0x40
+#define SEND_Q         0x04
+#define EXEC_Q         0x02
+#define NOTINQ         0x01
+
+	u8     _r_b[3];
+	u8     conn_mask;
+	u8     _r_c[19];
+	struct ssp_task_iu ssp_task; /* LUN and TAG */
+	__le16 _r_d;
+	__le16 conn_handle;
+	__le64 _r_e;
+	__le16 index;  /* Transaction context of task to be cleared */
+	__le16 context;		  /* Clear nexus context */
+	u8     _r_f[44];
+} __attribute__ ((packed));
+
+struct initiate_ssp_tmf {
+	u8     proto_conn_rate;
+	__le32 _r_a;
+	struct ssp_frame_hdr ssp_frame;
+	struct ssp_task_iu ssp_task;
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     flags;	  /* itnl override and suspend data tx */
+#define OVERRIDE_ITNL_TIMER  8
+
+	u8     _r_b;
+	u8     retry_count;
+	u8     _r_c[5];
+	__le16 index;  /* Transaction context of task to be queried */
+	__le16 itnl_to;
+	u8     _r_d[44];
+} __attribute__ ((packed));
+
+/* Transmits an arbitrary primitive on the link.
+ * Used for NOTIFY and BROADCAST.
+ */
+struct send_prim {
+	u8     phy_id;
+	u8     wait_transmit; 	  /* :0,0 */
+	u8     xmit_flags;
+#define XMTPSIZE_MASK      0xF0
+#define XMTPSIZE_SINGLE    0x10
+#define XMTPSIZE_REPEATED  0x20
+#define XMTPSIZE_CONT      0x20
+#define XMTPSIZE_TRIPLE    0x30
+#define XMTPSIZE_REDUNDANT 0x60
+#define XMTPSIZE_INF       0
+
+#define XMTCONTEN          0x04
+#define XMTPFRM            0x02	  /* Transmit at the next frame boundary */
+#define XMTPIMM            0x01	  /* Transmit immediately */
+
+	__le16 _r_a;
+	u8     prim[4];		  /* K, D0, D1, D2 */
+	u8     _r_b[50];
+	__le16 conn_handle;
+	u8     _r_c[56];
+} __attribute__ ((packed));
+
+/* This describes both SSP Target Get Data and SSP Target Get Data And
+ * Send Good Response SCBs.  Used when the sequencer is operating in
+ * target mode...
+ */
+struct ssp_targ_get_data {
+	u8     proto_conn_rate;
+	__le32 total_xfer_len;
+	struct ssp_frame_hdr ssp_frame;
+	struct xfer_rdy_iu  xfer_rdy;
+	u8     lun[LUN_SIZE];
+	__le64 _r_a;
+	__le16 sister_scb;
+	__le16 conn_handle;
+	u8     data_dir;	  /* 01b */
+	u8     _r_b;
+	u8     retry_count;
+	u8     _r_c[5];
+	struct sg_el sg_element[3];
+} __attribute__ ((packed));
+
+/* ---------- The actual SCB struct ---------- */
+
+struct scb {
+	struct scb_header header;
+	union {
+		struct initiate_ssp_task ssp_task;
+		struct initiate_ata_task ata_task;
+		struct initiate_smp_task smp_task;
+		struct control_phy       control_phy;
+		struct control_ata_dev   control_ata_dev;
+		struct empty_scb         escb;
+		struct initiate_link_adm link_adm;
+		struct copy_memory       cp_mem;
+		struct abort_task        abort_task;
+		struct clear_nexus       clear_nexus;
+		struct initiate_ssp_tmf  ssp_tmf;
+	};
+} __attribute__ ((packed));
+
+/* ---------- Done List ---------- */
+/* The done list entry opcode field is defined below.
+ * The mnemonic encoding and meaning is as follows:
+ * TC - Task Complete, status was received and acknowledged
+ * TF - Task Failed, indicates an error prior to receiving acknowledgment
+ *   for the command:
+ *   - no conn,
+ *   - NACK or R_ERR received in response to this command,
+ *   - credit blocked or not available, or in the case of SMP request,
+ *   - no SMP response was received.
+ *   In these four cases it is known that the target didn't receive the
+ *   command.
+ * TI - Task Interrupted, error after the command was acknowledged.  It is
+ *   known that the command was received by the target.
+ * TU - Task Unacked, command was transmitted but neither ACK (R_OK) nor NAK
+ *   (R_ERR) was received due to loss of signal, broken connection, loss of
+ *   dword sync or other reason.  The application client should send the
+ *   appropriate task query.
+ * TA - Task Aborted, see TF.
+ * _RESP - The completion includes an empty buffer containing status.
+ * TO - Timeout.
+ */
+#define TC_NO_ERROR             0x00
+#define TC_UNDERRUN             0x01
+#define TC_OVERRUN              0x02
+#define TF_OPEN_TO              0x03
+#define TF_OPEN_REJECT          0x04
+#define TI_BREAK                0x05
+#define TI_PROTO_ERR            0x06
+#define TC_SSP_RESP             0x07
+#define TI_PHY_DOWN             0x08
+#define TF_PHY_DOWN             0x09
+#define TC_LINK_ADM_RESP        0x0a
+#define TC_CSMI                 0x0b
+#define TC_ATA_RESP             0x0c
+#define TU_PHY_DOWN             0x0d
+#define TU_BREAK                0x0e
+#define TI_SATA_TO              0x0f
+#define TI_NAK                  0x10
+#define TC_CONTROL_PHY          0x11
+#define TF_BREAK                0x12
+#define TC_RESUME               0x13
+#define TI_ACK_NAK_TO           0x14
+#define TF_SMPRSP_TO            0x15
+#define TF_SMP_XMIT_RCV_ERR     0x16
+#define TC_PARTIAL_SG_LIST      0x17
+#define TU_ACK_NAK_TO           0x18
+#define TU_SATA_TO              0x19
+#define TF_NAK_RECV             0x1a
+#define TA_I_T_NEXUS_LOSS       0x1b
+#define TC_ATA_R_ERR_RECV       0x1c
+#define TF_TMF_NO_CTX           0x1d
+#define TA_ON_REQ               0x1e
+#define TF_TMF_NO_TAG           0x1f
+#define TF_TMF_TAG_FREE         0x20
+#define TF_TMF_TASK_DONE        0x21
+#define TF_TMF_NO_CONN_HANDLE   0x22
+#define TC_TASK_CLEARED         0x23
+#define TI_SYNCS_RECV           0x24
+#define TU_SYNCS_RECV           0x25
+#define TF_IRTT_TO              0x26
+#define TF_NO_SMP_CONN          0x27
+#define TF_IU_SHORT             0x28
+#define TF_DATA_OFFS_ERR        0x29
+#define TF_INV_CONN_HANDLE      0x2a
+#define TF_REQUESTED_N_PENDING  0x2b
+
+/* 0xc1 - 0xc7: empty buffer received,
+   0xd1 - 0xd7: establish nexus empty buffer received
+*/
+/* This is the ESCB mask */
+#define ESCB_RECVD              0xC0
+
+
+/* This struct done_list_struct defines the done list entry.
+ * All fields are LE.
+ */
+struct done_list_struct {
+	__le16 index;		  /* aka transaction context */
+	u8     opcode;
+	u8     status_block[4];
+	u8     toggle;		  /* bit 0 */
+#define DL_TOGGLE_MASK     0x01
+} __attribute__ ((packed));
+
+/* ---------- PHYS ---------- */
+
+struct asd_phy {
+	struct asd_sas_phy        sas_phy;
+	struct asd_phy_desc   *phy_desc; /* hw profile */
+
+	struct sas_identify_frame *identify_frame;
+	struct asd_dma_tok  *id_frm_tok;
+
+	u8         frame_rcvd[ASD_EDB_SIZE];
+};
+
+
+#define ASD_SCB_SIZE sizeof(struct scb)
+#define ASD_DDB_SIZE sizeof(struct asd_ddb_ssp_smp_target_port)
+
+/* Define this to 0 if you do not want NOTIFY (ENABLE SPINIP) sent.
+ * Default: 0x10 (it's a mask)
+ */
+#define ASD_NOTIFY_ENABLE_SPINUP  0x10
+
+/* If enabled, set this to the interval between transmission
+ * of NOTIFY (ENABLE SPINUP). In units of 200 us.
+ */
+#define ASD_NOTIFY_TIMEOUT        2500
+
+/* Initial delay after OOB, before we transmit NOTIFY (ENABLE SPINUP).
+ * If 0, transmit immediately. In milliseconds.
+ */
+#define ASD_NOTIFY_DOWN_COUNT     0
+
+/* Device present timer timeout constant, 10 ms. */
+#define ASD_DEV_PRESENT_TIMEOUT   0x2710
+
+#define ASD_SATA_INTERLOCK_TIMEOUT 0
+
+/* How long to wait before shutting down an STP connection, unless
+ * an STP target sent frame(s). 50 usec.
+ * IGNORED by the sequencer (i.e. value 0 always).
+ */
+#define ASD_STP_SHUTDOWN_TIMEOUT  0x0
+
+/* ATA soft reset timer timeout. 5 usec. */
+#define ASD_SRST_ASSERT_TIMEOUT   0x05
+
+/* 31 sec */
+#define ASD_RCV_FIS_TIMEOUT       0x01D905C0
+
+#define ASD_ONE_MILLISEC_TIMEOUT  0x03e8
+
+/* COMINIT timer */
+#define ASD_TEN_MILLISEC_TIMEOUT  0x2710
+#define ASD_COMINIT_TIMEOUT ASD_TEN_MILLISEC_TIMEOUT
+
+/* 1 sec */
+#define ASD_SMP_RCV_TIMEOUT       0x000F4240
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
new file mode 100644
index 000000000000..fc1b7438a913
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -0,0 +1,732 @@
+/*
+ * Aic94xx SAS/SATA driver SCB management.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+
+#include "aic94xx_dump.h"
+
+/* ---------- EMPTY SCB ---------- */
+
+#define DL_PHY_MASK      7
+#define BYTES_DMAED      0
+#define PRIMITIVE_RECVD  0x08
+#define PHY_EVENT        0x10
+#define LINK_RESET_ERROR 0x18
+#define TIMER_EVENT      0x20
+#define REQ_TASK_ABORT   0xF0
+#define REQ_DEVICE_RESET 0xF1
+#define SIGNAL_NCQ_ERROR 0xF2
+#define CLEAR_NCQ_ERROR  0xF3
+
+#define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE   \
+			   | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
+			   | CURRENT_OOB_ERROR)
+
+static inline void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
+{
+	switch (oob_mode & 7) {
+	case PHY_SPEED_60:
+		/* FIXME: sas transport class doesn't have this */
+		phy->sas_phy.linkrate = PHY_LINKRATE_6;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+		break;
+	case PHY_SPEED_30:
+		phy->sas_phy.linkrate = PHY_LINKRATE_3;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+		break;
+	case PHY_SPEED_15:
+		phy->sas_phy.linkrate = PHY_LINKRATE_1_5;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+		break;
+	}
+	if (oob_mode & SAS_MODE)
+		phy->sas_phy.oob_mode = SAS_OOB_MODE;
+	else if (oob_mode & SATA_MODE)
+		phy->sas_phy.oob_mode = SATA_OOB_MODE;
+}
+
+static inline void asd_phy_event_tasklet(struct asd_ascb *ascb,
+					 struct done_list_struct *dl)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+	int phy_id = dl->status_block[0] & DL_PHY_MASK;
+	struct asd_phy *phy = &asd_ha->phys[phy_id];
+
+	u8 oob_status = dl->status_block[1] & PHY_EVENTS_STATUS;
+	u8 oob_mode   = dl->status_block[2];
+
+	switch (oob_status) {
+	case CURRENT_LOSS_OF_SIGNAL:
+		/* directly attached device was removed */
+		ASD_DPRINTK("phy%d: device unplugged\n", phy_id);
+		asd_turn_led(asd_ha, phy_id, 0);
+		sas_phy_disconnected(&phy->sas_phy);
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+		break;
+	case CURRENT_OOB_DONE:
+		/* hot plugged device */
+		asd_turn_led(asd_ha, phy_id, 1);
+		get_lrate_mode(phy, oob_mode);
+		ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
+			    phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto);
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+		break;
+	case CURRENT_SPINUP_HOLD:
+		/* hot plug SATA, no COMWAKE sent */
+		asd_turn_led(asd_ha, phy_id, 1);
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+		break;
+	case CURRENT_GTO_TIMEOUT:
+	case CURRENT_OOB_ERROR:
+		ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id,
+			    dl->status_block[1]);
+		asd_turn_led(asd_ha, phy_id, 0);
+		sas_phy_disconnected(&phy->sas_phy);
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+		break;
+	}
+}
+
+/* If phys are enabled sparsely, this will do the right thing. */
+static inline unsigned ord_phy(struct asd_ha_struct *asd_ha,
+			       struct asd_phy *phy)
+{
+	u8 enabled_mask = asd_ha->hw_prof.enabled_phys;
+	int i, k = 0;
+
+	for_each_phy(enabled_mask, enabled_mask, i) {
+		if (&asd_ha->phys[i] == phy)
+			return k;
+		k++;
+	}
+	return 0;
+}
+
+/**
+ * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * phy: pointer to asd_phy
+ * sas_addr: pointer to buffer where the SAS address is to be written
+ *
+ * This function extracts the SAS address from an IDENTIFY frame
+ * received.  If OOB is SATA, then a SAS address is generated from the
+ * HA tables.
+ *
+ * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
+ * buffer.
+ */
+static inline void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr)
+{
+	if (phy->sas_phy.frame_rcvd[0] == 0x34
+	    && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
+		struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
+		/* FIS device-to-host */
+		u64 addr = be64_to_cpu(*(__be64 *)phy->phy_desc->sas_addr);
+
+		addr += asd_ha->hw_prof.sata_name_base + ord_phy(asd_ha, phy);
+		*(__be64 *)sas_addr = cpu_to_be64(addr);
+	} else {
+		struct sas_identify_frame *idframe =
+			(void *) phy->sas_phy.frame_rcvd;
+		memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
+	}
+}
+
+static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
+					   struct done_list_struct *dl,
+					   int edb_id, int phy_id)
+{
+	unsigned long flags;
+	int edb_el = edb_id + ascb->edb_index;
+	struct asd_dma_tok *edb = ascb->ha->seq.edb_arr[edb_el];
+	struct asd_phy *phy = &ascb->ha->phys[phy_id];
+	struct sas_ha_struct *sas_ha = phy->sas_phy.ha;
+	u16 size = ((dl->status_block[3] & 7) << 8) | dl->status_block[2];
+
+	size = min(size, (u16) sizeof(phy->frame_rcvd));
+
+	spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+	memcpy(phy->sas_phy.frame_rcvd, edb->vaddr, size);
+	phy->sas_phy.frame_rcvd_size = size;
+	asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+	asd_dump_frame_rcvd(phy, dl);
+	sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
+}
+
+static inline void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
+					      struct done_list_struct *dl,
+					      int phy_id)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+	u8 lr_error = dl->status_block[1];
+	u8 retries_left = dl->status_block[2];
+
+	switch (lr_error) {
+	case 0:
+		ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id);
+		break;
+	case 1:
+		ASD_DPRINTK("phy%d: Loss of signal\n", phy_id);
+		break;
+	case 2:
+		ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id);
+		break;
+	case 3:
+		ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id);
+		break;
+	default:
+		ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n",
+			    phy_id, lr_error);
+		break;
+	}
+
+	asd_turn_led(asd_ha, phy_id, 0);
+	sas_phy_disconnected(sas_phy);
+	sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+
+	if (retries_left == 0) {
+		int num = 1;
+		struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num,
+							  GFP_ATOMIC);
+		if (!cp) {
+			asd_printk("%s: out of memory\n", __FUNCTION__);
+			goto out;
+		}
+		ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
+			    phy_id);
+		asd_build_control_phy(cp, phy_id, ENABLE_PHY);
+		if (asd_post_ascb_list(ascb->ha, cp, 1) != 0)
+			asd_ascb_free(cp);
+	}
+out:
+	;
+}
+
+static inline void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
+					      struct done_list_struct *dl,
+					      int phy_id)
+{
+	unsigned long flags;
+	struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha;
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+	u8  reg  = dl->status_block[1];
+	u32 cont = dl->status_block[2] << ((reg & 3)*8);
+
+	reg &= ~3;
+	switch (reg) {
+	case LmPRMSTAT0BYTE0:
+		switch (cont) {
+		case LmBROADCH:
+		case LmBROADRVCH0:
+		case LmBROADRVCH1:
+		case LmBROADSES:
+			ASD_DPRINTK("phy%d: BROADCAST change received:%d\n",
+				    phy_id, cont);
+			spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+			sas_phy->sas_prim = ffs(cont);
+			spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+			sas_ha->notify_port_event(sas_phy,PORTE_BROADCAST_RCVD);
+			break;
+
+		case LmUNKNOWNP:
+			ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id);
+			break;
+
+		default:
+			ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
+				    phy_id, reg, cont);
+			break;
+		}
+		break;
+	case LmPRMSTAT1BYTE0:
+		switch (cont) {
+		case LmHARDRST:
+			ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n",
+				    phy_id);
+			/* The sequencer disables all phys on that port.
+			 * We have to re-enable the phys ourselves. */
+			sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+			break;
+
+		default:
+			ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
+				    phy_id, reg, cont);
+			break;
+		}
+		break;
+	default:
+		ASD_DPRINTK("unknown primitive register:0x%x\n",
+			    dl->status_block[1]);
+		break;
+	}
+}
+
+/**
+ * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB
+ * @ascb: pointer to Empty SCB
+ * @edb_id: index [0,6] to the empty data buffer which is to be invalidated
+ *
+ * After an EDB has been invalidated, if all EDBs in this ESCB have been
+ * invalidated, the ESCB is posted back to the sequencer.
+ * Context is tasklet/IRQ.
+ */
+void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id)
+{
+	struct asd_seq_data *seq = &ascb->ha->seq;
+	struct empty_scb *escb = &ascb->scb->escb;
+	struct sg_el     *eb   = &escb->eb[edb_id];
+	struct asd_dma_tok *edb = seq->edb_arr[ascb->edb_index + edb_id];
+
+	memset(edb->vaddr, 0, ASD_EDB_SIZE);
+	eb->flags |= ELEMENT_NOT_VALID;
+	escb->num_valid--;
+
+	if (escb->num_valid == 0) {
+		int i;
+		/* ASD_DPRINTK("reposting escb: vaddr: 0x%p, "
+			    "dma_handle: 0x%08llx, next: 0x%08llx, "
+			    "index:%d, opcode:0x%02x\n",
+			    ascb->dma_scb.vaddr,
+			    (u64)ascb->dma_scb.dma_handle,
+			    le64_to_cpu(ascb->scb->header.next_scb),
+			    le16_to_cpu(ascb->scb->header.index),
+			    ascb->scb->header.opcode);
+		*/
+		escb->num_valid = ASD_EDBS_PER_SCB;
+		for (i = 0; i < ASD_EDBS_PER_SCB; i++)
+			escb->eb[i].flags = 0;
+		if (!list_empty(&ascb->list))
+			list_del_init(&ascb->list);
+		i = asd_post_escb_list(ascb->ha, ascb, 1);
+		if (i)
+			asd_printk("couldn't post escb, err:%d\n", i);
+	}
+}
+
+static void escb_tasklet_complete(struct asd_ascb *ascb,
+				  struct done_list_struct *dl)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+	int edb = (dl->opcode & DL_PHY_MASK) - 1; /* [0xc1,0xc7] -> [0,6] */
+	u8  sb_opcode = dl->status_block[0];
+	int phy_id = sb_opcode & DL_PHY_MASK;
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+
+	if (edb > 6 || edb < 0) {
+		ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
+			    edb, dl->opcode);
+		ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
+			    sb_opcode, phy_id);
+		ASD_DPRINTK("escb: vaddr: 0x%p, "
+			    "dma_handle: 0x%llx, next: 0x%llx, "
+			    "index:%d, opcode:0x%02x\n",
+			    ascb->dma_scb.vaddr,
+			    (unsigned long long)ascb->dma_scb.dma_handle,
+			    (unsigned long long)
+			    le64_to_cpu(ascb->scb->header.next_scb),
+			    le16_to_cpu(ascb->scb->header.index),
+			    ascb->scb->header.opcode);
+	}
+
+	sb_opcode &= ~DL_PHY_MASK;
+
+	switch (sb_opcode) {
+	case BYTES_DMAED:
+		ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__, phy_id);
+		asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id);
+		break;
+	case PRIMITIVE_RECVD:
+		ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__,
+			    phy_id);
+		asd_primitive_rcvd_tasklet(ascb, dl, phy_id);
+		break;
+	case PHY_EVENT:
+		ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__, phy_id);
+		asd_phy_event_tasklet(ascb, dl);
+		break;
+	case LINK_RESET_ERROR:
+		ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__,
+			    phy_id);
+		asd_link_reset_err_tasklet(ascb, dl, phy_id);
+		break;
+	case TIMER_EVENT:
+		ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
+			    __FUNCTION__, phy_id);
+		asd_turn_led(asd_ha, phy_id, 0);
+		/* the device is gone */
+		sas_phy_disconnected(sas_phy);
+		sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
+		break;
+	case REQ_TASK_ABORT:
+		ASD_DPRINTK("%s: phy%d: REQ_TASK_ABORT\n", __FUNCTION__,
+			    phy_id);
+		break;
+	case REQ_DEVICE_RESET:
+		ASD_DPRINTK("%s: phy%d: REQ_DEVICE_RESET\n", __FUNCTION__,
+			    phy_id);
+		break;
+	case SIGNAL_NCQ_ERROR:
+		ASD_DPRINTK("%s: phy%d: SIGNAL_NCQ_ERROR\n", __FUNCTION__,
+			    phy_id);
+		break;
+	case CLEAR_NCQ_ERROR:
+		ASD_DPRINTK("%s: phy%d: CLEAR_NCQ_ERROR\n", __FUNCTION__,
+			    phy_id);
+		break;
+	default:
+		ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__,
+			    phy_id, sb_opcode);
+		ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
+			    edb, dl->opcode);
+		ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
+			    sb_opcode, phy_id);
+		ASD_DPRINTK("escb: vaddr: 0x%p, "
+			    "dma_handle: 0x%llx, next: 0x%llx, "
+			    "index:%d, opcode:0x%02x\n",
+			    ascb->dma_scb.vaddr,
+			    (unsigned long long)ascb->dma_scb.dma_handle,
+			    (unsigned long long)
+			    le64_to_cpu(ascb->scb->header.next_scb),
+			    le16_to_cpu(ascb->scb->header.index),
+			    ascb->scb->header.opcode);
+
+		break;
+	}
+
+	asd_invalidate_edb(ascb, edb);
+}
+
+int asd_init_post_escbs(struct asd_ha_struct *asd_ha)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	int i;
+
+	for (i = 0; i < seq->num_escbs; i++)
+		seq->escb_arr[i]->tasklet_complete = escb_tasklet_complete;
+
+	ASD_DPRINTK("posting %d escbs\n", i);
+	return asd_post_escb_list(asd_ha, seq->escb_arr[0], seq->num_escbs);
+}
+
+/* ---------- CONTROL PHY ---------- */
+
+#define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE   \
+			    | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
+			    | CURRENT_OOB_ERROR)
+
+/**
+ * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb
+ * @ascb: pointer to an ascb
+ * @dl: pointer to the done list entry
+ *
+ * This function completes a CONTROL PHY scb and frees the ascb.
+ * A note on LEDs:
+ *  - an LED blinks if there is IO though it,
+ *  - if a device is connected to the LED, it is lit,
+ *  - if no device is connected to the LED, is is dimmed (off).
+ */
+static void control_phy_tasklet_complete(struct asd_ascb *ascb,
+					 struct done_list_struct *dl)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct scb *scb = ascb->scb;
+	struct control_phy *control_phy = &scb->control_phy;
+	u8 phy_id = control_phy->phy_id;
+	struct asd_phy *phy = &ascb->ha->phys[phy_id];
+
+	u8 status     = dl->status_block[0];
+	u8 oob_status = dl->status_block[1];
+	u8 oob_mode   = dl->status_block[2];
+	/* u8 oob_signals= dl->status_block[3]; */
+
+	if (status != 0) {
+		ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
+			    __FUNCTION__, phy_id, status);
+		goto out;
+	}
+
+	switch (control_phy->sub_func) {
+	case DISABLE_PHY:
+		asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id);
+		asd_turn_led(asd_ha, phy_id, 0);
+		asd_control_led(asd_ha, phy_id, 0);
+		ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__, phy_id);
+		break;
+
+	case ENABLE_PHY:
+		asd_control_led(asd_ha, phy_id, 1);
+		if (oob_status & CURRENT_OOB_DONE) {
+			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+			get_lrate_mode(phy, oob_mode);
+			asd_turn_led(asd_ha, phy_id, 1);
+			ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
+				    __FUNCTION__, phy_id,phy->sas_phy.linkrate,
+				    phy->sas_phy.iproto);
+		} else if (oob_status & CURRENT_SPINUP_HOLD) {
+			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+			asd_turn_led(asd_ha, phy_id, 1);
+			ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__,
+				    phy_id);
+		} else if (oob_status & CURRENT_ERR_MASK) {
+			asd_turn_led(asd_ha, phy_id, 0);
+			ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
+				    __FUNCTION__, phy_id, oob_status);
+		} else if (oob_status & (CURRENT_HOT_PLUG_CNCT
+					 | CURRENT_DEVICE_PRESENT))  {
+			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+			asd_turn_led(asd_ha, phy_id, 1);
+			ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
+				    __FUNCTION__, phy_id);
+		} else {
+			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+			asd_turn_led(asd_ha, phy_id, 0);
+			ASD_DPRINTK("%s: phy%d: no device present: "
+				    "oob_status:0x%x\n",
+				    __FUNCTION__, phy_id, oob_status);
+		}
+		break;
+	case RELEASE_SPINUP_HOLD:
+	case PHY_NO_OP:
+	case EXECUTE_HARD_RESET:
+		ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__,
+			    phy_id, control_phy->sub_func);
+		/* XXX finish */
+		break;
+	default:
+		ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__,
+			    phy_id, control_phy->sub_func);
+		break;
+	}
+out:
+	asd_ascb_free(ascb);
+}
+
+static inline void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd)
+{
+	/* disable all speeds, then enable defaults */
+	*speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS
+		| SATA_SPEED_30_DIS | SATA_SPEED_15_DIS;
+
+	switch (pd->max_sas_lrate) {
+	case PHY_LINKRATE_6:
+		*speed_mask &= ~SAS_SPEED_60_DIS;
+	default:
+	case PHY_LINKRATE_3:
+		*speed_mask &= ~SAS_SPEED_30_DIS;
+	case PHY_LINKRATE_1_5:
+		*speed_mask &= ~SAS_SPEED_15_DIS;
+	}
+
+	switch (pd->min_sas_lrate) {
+	case PHY_LINKRATE_6:
+		*speed_mask |= SAS_SPEED_30_DIS;
+	case PHY_LINKRATE_3:
+		*speed_mask |= SAS_SPEED_15_DIS;
+	default:
+	case PHY_LINKRATE_1_5:
+		/* nothing to do */
+		;
+	}
+
+	switch (pd->max_sata_lrate) {
+	case PHY_LINKRATE_3:
+		*speed_mask &= ~SATA_SPEED_30_DIS;
+	default:
+	case PHY_LINKRATE_1_5:
+		*speed_mask &= ~SATA_SPEED_15_DIS;
+	}
+
+	switch (pd->min_sata_lrate) {
+	case PHY_LINKRATE_3:
+		*speed_mask |= SATA_SPEED_15_DIS;
+	default:
+	case PHY_LINKRATE_1_5:
+		/* nothing to do */
+		;
+	}
+}
+
+/**
+ * asd_build_control_phy -- build a CONTROL PHY SCB
+ * @ascb: pointer to an ascb
+ * @phy_id: phy id to control, integer
+ * @subfunc: subfunction, what to actually to do the phy
+ *
+ * This function builds a CONTROL PHY scb.  No allocation of any kind
+ * is performed. @ascb is allocated with the list function.
+ * The caller can override the ascb->tasklet_complete to point
+ * to its own callback function.  It must call asd_ascb_free()
+ * at its tasklet complete function.
+ * See the default implementation.
+ */
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc)
+{
+	struct asd_phy *phy = &ascb->ha->phys[phy_id];
+	struct scb *scb = ascb->scb;
+	struct control_phy *control_phy = &scb->control_phy;
+
+	scb->header.opcode = CONTROL_PHY;
+	control_phy->phy_id = (u8) phy_id;
+	control_phy->sub_func = subfunc;
+
+	switch (subfunc) {
+	case EXECUTE_HARD_RESET:  /* 0x81 */
+	case ENABLE_PHY:          /* 0x01 */
+		/* decide hot plug delay */
+		control_phy->hot_plug_delay = HOTPLUG_DELAY_TIMEOUT;
+
+		/* decide speed mask */
+		set_speed_mask(&control_phy->speed_mask, phy->phy_desc);
+
+		/* initiator port settings are in the hi nibble */
+		if (phy->sas_phy.role == PHY_ROLE_INITIATOR)
+			control_phy->port_type = SAS_PROTO_ALL << 4;
+		else if (phy->sas_phy.role == PHY_ROLE_TARGET)
+			control_phy->port_type = SAS_PROTO_ALL;
+		else
+			control_phy->port_type =
+				(SAS_PROTO_ALL << 4) | SAS_PROTO_ALL;
+
+		/* link reset retries, this should be nominal */
+		control_phy->link_reset_retries = 10;
+
+	case RELEASE_SPINUP_HOLD: /* 0x02 */
+		/* decide the func_mask */
+		control_phy->func_mask = FUNCTION_MASK_DEFAULT;
+		if (phy->phy_desc->flags & ASD_SATA_SPINUP_HOLD)
+			control_phy->func_mask &= ~SPINUP_HOLD_DIS;
+		else
+			control_phy->func_mask |= SPINUP_HOLD_DIS;
+	}
+
+	control_phy->conn_handle = cpu_to_le16(0xFFFF);
+
+	ascb->tasklet_complete = control_phy_tasklet_complete;
+}
+
+/* ---------- INITIATE LINK ADM TASK ---------- */
+
+static void link_adm_tasklet_complete(struct asd_ascb *ascb,
+				      struct done_list_struct *dl)
+{
+	u8 opcode = dl->opcode;
+	struct initiate_link_adm *link_adm = &ascb->scb->link_adm;
+	u8 phy_id = link_adm->phy_id;
+
+	if (opcode != TC_NO_ERROR) {
+		asd_printk("phy%d: link adm task 0x%x completed with error "
+			   "0x%x\n", phy_id, link_adm->sub_func, opcode);
+	}
+	ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n",
+		    phy_id, link_adm->sub_func, opcode);
+
+	asd_ascb_free(ascb);
+}
+
+void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
+				      u8 subfunc)
+{
+	struct scb *scb = ascb->scb;
+	struct initiate_link_adm *link_adm = &scb->link_adm;
+
+	scb->header.opcode = INITIATE_LINK_ADM_TASK;
+
+	link_adm->phy_id = phy_id;
+	link_adm->sub_func = subfunc;
+	link_adm->conn_handle = cpu_to_le16(0xFFFF);
+
+	ascb->tasklet_complete = link_adm_tasklet_complete;
+}
+
+/* ---------- SCB timer ---------- */
+
+/**
+ * asd_ascb_timedout -- called when a pending SCB's timer has expired
+ * @data: unsigned long, a pointer to the ascb in question
+ *
+ * This is the default timeout function which does the most necessary.
+ * Upper layers can implement their own timeout function, say to free
+ * resources they have with this SCB, and then call this one at the
+ * end of their timeout function.  To do this, one should initialize
+ * the ascb->timer.{function, data, expires} prior to calling the post
+ * funcion.  The timer is started by the post function.
+ */
+void asd_ascb_timedout(unsigned long data)
+{
+	struct asd_ascb *ascb = (void *) data;
+	struct asd_seq_data *seq = &ascb->ha->seq;
+	unsigned long flags;
+
+	ASD_DPRINTK("scb:0x%x timed out\n", ascb->scb->header.opcode);
+
+	spin_lock_irqsave(&seq->pend_q_lock, flags);
+	seq->pending--;
+	list_del_init(&ascb->list);
+	spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+
+	asd_ascb_free(ascb);
+}
+
+/* ---------- CONTROL PHY ---------- */
+
+/* Given the spec value, return a driver value. */
+static const int phy_func_table[] = {
+	[PHY_FUNC_NOP]        = PHY_NO_OP,
+	[PHY_FUNC_LINK_RESET] = ENABLE_PHY,
+	[PHY_FUNC_HARD_RESET] = EXECUTE_HARD_RESET,
+	[PHY_FUNC_DISABLE]    = DISABLE_PHY,
+	[PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD,
+};
+
+int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func)
+{
+	struct asd_ha_struct *asd_ha = phy->ha->lldd_ha;
+	struct asd_ascb *ascb;
+	int res = 1;
+
+	if (func == PHY_FUNC_CLEAR_ERROR_LOG)
+		return -ENOSYS;
+
+	ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+	if (!ascb)
+		return -ENOMEM;
+
+	asd_build_control_phy(ascb, phy->id, phy_func_table[func]);
+	res = asd_post_ascb_list(asd_ha, ascb , 1);
+	if (res)
+		asd_ascb_free(ascb);
+
+	return res;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c
new file mode 100644
index 000000000000..eec1e0db0e0f
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_sds.c
@@ -0,0 +1,1136 @@
+/*
+ * Aic94xx SAS/SATA driver access to shared data structures and memory
+ * maps.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+
+/* ---------- OCM stuff ---------- */
+
+struct asd_ocm_dir_ent {
+	u8 type;
+	u8 offs[3];
+	u8 _r1;
+	u8 size[3];
+} __attribute__ ((packed));
+
+struct asd_ocm_dir {
+	char sig[2];
+	u8   _r1[2];
+	u8   major;          /* 0 */
+	u8   minor;          /* 0 */
+	u8   _r2;
+	u8   num_de;
+	struct asd_ocm_dir_ent entry[15];
+} __attribute__ ((packed));
+
+#define	OCM_DE_OCM_DIR			0x00
+#define	OCM_DE_WIN_DRVR			0x01
+#define	OCM_DE_BIOS_CHIM		0x02
+#define	OCM_DE_RAID_ENGN		0x03
+#define	OCM_DE_BIOS_INTL		0x04
+#define	OCM_DE_BIOS_CHIM_OSM		0x05
+#define	OCM_DE_BIOS_CHIM_DYNAMIC	0x06
+#define	OCM_DE_ADDC2C_RES0		0x07
+#define	OCM_DE_ADDC2C_RES1		0x08
+#define	OCM_DE_ADDC2C_RES2		0x09
+#define	OCM_DE_ADDC2C_RES3		0x0A
+
+#define OCM_INIT_DIR_ENTRIES	5
+/***************************************************************************
+*  OCM dircetory default
+***************************************************************************/
+static struct asd_ocm_dir OCMDirInit =
+{
+	.sig = {0x4D, 0x4F},	/* signature */
+	.num_de = OCM_INIT_DIR_ENTRIES,	/* no. of directory entries */
+};
+
+/***************************************************************************
+*  OCM dircetory Entries default
+***************************************************************************/
+static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] =
+{
+	{
+		.type = (OCM_DE_ADDC2C_RES0),	/* Entry type  */
+		.offs = {128},			/* Offset */
+		.size = {0, 4},			/* size */
+	},
+	{
+		.type = (OCM_DE_ADDC2C_RES1),	/* Entry type  */
+		.offs = {128, 4},		/* Offset */
+		.size = {0, 4},			/* size */
+	},
+	{
+		.type = (OCM_DE_ADDC2C_RES2),	/* Entry type  */
+		.offs = {128, 8},		/* Offset */
+		.size = {0, 4},			/* size */
+	},
+	{
+		.type = (OCM_DE_ADDC2C_RES3),	/* Entry type  */
+		.offs = {128, 12},		/* Offset */
+		.size = {0, 4},			/* size */
+	},
+	{
+		.type = (OCM_DE_WIN_DRVR),	/* Entry type  */
+		.offs = {128, 16},		/* Offset */
+		.size = {128, 235, 1},		/* size */
+	},
+};
+
+struct asd_bios_chim_struct {
+	char sig[4];
+	u8   major;          /* 1 */
+	u8   minor;          /* 0 */
+	u8   bios_major;
+	u8   bios_minor;
+	__le32  bios_build;
+	u8   flags;
+	u8   pci_slot;
+	__le16  ue_num;
+	__le16  ue_size;
+	u8  _r[14];
+	/* The unit element array is right here.
+	 */
+} __attribute__ ((packed));
+
+/**
+ * asd_read_ocm_seg - read an on chip memory (OCM) segment
+ * @asd_ha: pointer to the host adapter structure
+ * @buffer: where to write the read data
+ * @offs: offset into OCM where to read from
+ * @size: how many bytes to read
+ *
+ * Return the number of bytes not read. Return 0 on success.
+ */
+static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
+			    u32 offs, int size)
+{
+	u8 *p = buffer;
+	if (unlikely(asd_ha->iospace))
+		asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
+	else {
+		for ( ; size > 0; size--, offs++, p++)
+			*p = asd_read_ocm_byte(asd_ha, offs);
+	}
+	return size;
+}
+
+static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha,
+			    struct asd_ocm_dir *dir, u32 offs)
+{
+	int err = asd_read_ocm_seg(asd_ha, dir, offs, sizeof(*dir));
+	if (err) {
+		ASD_DPRINTK("couldn't read ocm segment\n");
+		return err;
+	}
+
+	if (dir->sig[0] != 'M' || dir->sig[1] != 'O') {
+		ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n",
+			    dir->sig[0], dir->sig[1]);
+		return -ENOENT;
+	}
+	if (dir->major != 0) {
+		asd_printk("unsupported major version of ocm dir:0x%x\n",
+			   dir->major);
+		return -ENOENT;
+	}
+	dir->num_de &= 0xf;
+	return 0;
+}
+
+/**
+ * asd_write_ocm_seg - write an on chip memory (OCM) segment
+ * @asd_ha: pointer to the host adapter structure
+ * @buffer: where to read the write data
+ * @offs: offset into OCM to write to
+ * @size: how many bytes to write
+ *
+ * Return the number of bytes not written. Return 0 on success.
+ */
+static void asd_write_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
+			    u32 offs, int size)
+{
+	u8 *p = buffer;
+	if (unlikely(asd_ha->iospace))
+		asd_write_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
+	else {
+		for ( ; size > 0; size--, offs++, p++)
+			asd_write_ocm_byte(asd_ha, offs, *p);
+	}
+	return;
+}
+
+#define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16))
+
+static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type,
+			      u32 *offs, u32 *size)
+{
+	int i;
+	struct asd_ocm_dir_ent *ent;
+
+	for (i = 0; i < dir->num_de; i++) {
+		if (dir->entry[i].type == type)
+			break;
+	}
+	if (i >= dir->num_de)
+		return -ENOENT;
+	ent = &dir->entry[i];
+	*offs = (u32) THREE_TO_NUM(ent->offs);
+	*size = (u32) THREE_TO_NUM(ent->size);
+	return 0;
+}
+
+#define OCM_BIOS_CHIM_DE  2
+#define BC_BIOS_PRESENT   1
+
+static int asd_get_bios_chim(struct asd_ha_struct *asd_ha,
+			     struct asd_ocm_dir *dir)
+{
+	int err;
+	struct asd_bios_chim_struct *bc_struct;
+	u32 offs, size;
+
+	err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size);
+	if (err) {
+		ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n");
+		goto out;
+	}
+	err = -ENOMEM;
+	bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL);
+	if (!bc_struct) {
+		asd_printk("no memory for bios_chim struct\n");
+		goto out;
+	}
+	err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs,
+			       sizeof(*bc_struct));
+	if (err) {
+		ASD_DPRINTK("couldn't read ocm segment\n");
+		goto out2;
+	}
+	if (strncmp(bc_struct->sig, "SOIB", 4)
+	    && strncmp(bc_struct->sig, "IPSA", 4)) {
+		ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n",
+			    bc_struct->sig[0], bc_struct->sig[1],
+			    bc_struct->sig[2], bc_struct->sig[3]);
+		err = -ENOENT;
+		goto out2;
+	}
+	if (bc_struct->major != 1) {
+		asd_printk("BIOS_CHIM unsupported major version:0x%x\n",
+			   bc_struct->major);
+		err = -ENOENT;
+		goto out2;
+	}
+	if (bc_struct->flags & BC_BIOS_PRESENT) {
+		asd_ha->hw_prof.bios.present = 1;
+		asd_ha->hw_prof.bios.maj = bc_struct->bios_major;
+		asd_ha->hw_prof.bios.min = bc_struct->bios_minor;
+		asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build);
+		ASD_DPRINTK("BIOS present (%d,%d), %d\n",
+			    asd_ha->hw_prof.bios.maj,
+			    asd_ha->hw_prof.bios.min,
+			    asd_ha->hw_prof.bios.bld);
+	}
+	asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num);
+	asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size);
+	ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num,
+		    asd_ha->hw_prof.ue.size);
+	size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size;
+	if (size > 0) {
+		err = -ENOMEM;
+		asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL);
+		if (!asd_ha->hw_prof.ue.area)
+			goto out2;
+		err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area,
+				       offs + sizeof(*bc_struct), size);
+		if (err) {
+			kfree(asd_ha->hw_prof.ue.area);
+			asd_ha->hw_prof.ue.area = NULL;
+			asd_ha->hw_prof.ue.num  = 0;
+			asd_ha->hw_prof.ue.size = 0;
+			ASD_DPRINTK("couldn't read ue entries(%d)\n", err);
+		}
+	}
+out2:
+	kfree(bc_struct);
+out:
+	return err;
+}
+
+static void
+asd_hwi_initialize_ocm_dir (struct asd_ha_struct *asd_ha)
+{
+	int i;
+
+	/* Zero OCM */
+	for (i = 0; i < OCM_MAX_SIZE; i += 4)
+		asd_write_ocm_dword(asd_ha, i, 0);
+
+	/* Write Dir */
+	asd_write_ocm_seg(asd_ha, &OCMDirInit, 0,
+			  sizeof(struct asd_ocm_dir));
+
+	/* Write Dir Entries */
+	for (i = 0; i < OCM_INIT_DIR_ENTRIES; i++)
+		asd_write_ocm_seg(asd_ha, &OCMDirEntriesInit[i],
+				  sizeof(struct asd_ocm_dir) +
+				  (i * sizeof(struct asd_ocm_dir_ent))
+				  , sizeof(struct asd_ocm_dir_ent));
+
+}
+
+static int
+asd_hwi_check_ocm_access (struct asd_ha_struct *asd_ha)
+{
+	struct pci_dev *pcidev = asd_ha->pcidev;
+	u32 reg;
+	int err = 0;
+	u32 v;
+
+	/* check if OCM has been initialized by BIOS */
+	reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
+
+	if (!(reg & OCMINITIALIZED)) {
+		err = pci_read_config_dword(pcidev, PCIC_INTRPT_STAT, &v);
+		if (err) {
+			asd_printk("couldn't access PCIC_INTRPT_STAT of %s\n",
+					pci_name(pcidev));
+			goto out;
+		}
+
+		printk(KERN_INFO "OCM is not initialized by BIOS,"
+		       "reinitialize it and ignore it, current IntrptStatus"
+		       "is 0x%x\n", v);
+
+		if (v)
+			err = pci_write_config_dword(pcidev,
+						     PCIC_INTRPT_STAT, v);
+		if (err) {
+			asd_printk("couldn't write PCIC_INTRPT_STAT of %s\n",
+					pci_name(pcidev));
+			goto out;
+		}
+
+		asd_hwi_initialize_ocm_dir(asd_ha);
+
+	}
+out:
+	return err;
+}
+
+/**
+ * asd_read_ocm - read on chip memory (OCM)
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_ocm(struct asd_ha_struct *asd_ha)
+{
+	int err;
+	struct asd_ocm_dir *dir;
+
+	if (asd_hwi_check_ocm_access(asd_ha))
+		return -1;
+
+	dir = kmalloc(sizeof(*dir), GFP_KERNEL);
+	if (!dir) {
+		asd_printk("no memory for ocm dir\n");
+		return -ENOMEM;
+	}
+
+	err = asd_read_ocm_dir(asd_ha, dir, 0);
+	if (err)
+		goto out;
+
+	err = asd_get_bios_chim(asd_ha, dir);
+out:
+	kfree(dir);
+	return err;
+}
+
+/* ---------- FLASH stuff ---------- */
+
+#define FLASH_RESET			0xF0
+#define FLASH_MANUF_AMD                 1
+
+#define FLASH_SIZE                      0x200000
+#define FLASH_DIR_COOKIE                "*** ADAPTEC FLASH DIRECTORY *** "
+#define FLASH_NEXT_ENTRY_OFFS		0x2000
+#define FLASH_MAX_DIR_ENTRIES		32
+
+#define FLASH_DE_TYPE_MASK              0x3FFFFFFF
+#define FLASH_DE_MS                     0x120
+#define FLASH_DE_CTRL_A_USER            0xE0
+
+struct asd_flash_de {
+	__le32   type;
+	__le32   offs;
+	__le32   pad_size;
+	__le32   image_size;
+	__le32   chksum;
+	u8       _r[12];
+	u8       version[32];
+} __attribute__ ((packed));
+
+struct asd_flash_dir {
+	u8    cookie[32];
+	__le32   rev;		  /* 2 */
+	__le32   chksum;
+	__le32   chksum_antidote;
+	__le32   bld;
+	u8    bld_id[32];	  /* build id data */
+	u8    ver_data[32];	  /* date and time of build */
+	__le32   ae_mask;
+	__le32   v_mask;
+	__le32   oc_mask;
+	u8    _r[20];
+	struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES];
+} __attribute__ ((packed));
+
+struct asd_manuf_sec {
+	char  sig[2];		  /* 'S', 'M' */
+	u16   offs_next;
+	u8    maj;           /* 0 */
+	u8    min;           /* 0 */
+	u16   chksum;
+	u16   size;
+	u8    _r[6];
+	u8    sas_addr[SAS_ADDR_SIZE];
+	u8    pcba_sn[ASD_PCBA_SN_SIZE];
+	/* Here start the other segments */
+	u8    linked_list[0];
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_desc {
+	u8    state;         /* low 4 bits */
+#define MS_PHY_STATE_ENABLEABLE 0
+#define MS_PHY_STATE_REPORTED   1
+#define MS_PHY_STATE_HIDDEN     2
+	u8    phy_id;
+	u16   _r;
+	u8    phy_control_0; /* mode 5 reg 0x160 */
+	u8    phy_control_1; /* mode 5 reg 0x161 */
+	u8    phy_control_2; /* mode 5 reg 0x162 */
+	u8    phy_control_3; /* mode 5 reg 0x163 */
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_param {
+	char  sig[2];		  /* 'P', 'M' */
+	u16   next;
+	u8    maj;           /* 0 */
+	u8    min;           /* 2 */
+	u8    num_phy_desc;  /* 8 */
+	u8    phy_desc_size; /* 8 */
+	u8    _r[3];
+	u8    usage_model_id;
+	u32   _r2;
+	struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_sb_type[] = {
+	"unknown",
+	"SGPIO",
+	[2 ... 0x7F] = "unknown",
+	[0x80] = "ADPT_I2C",
+	[0x81 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+#endif
+
+struct asd_ms_sb_desc {
+	u8    type;
+	u8    node_desc_index;
+	u8    conn_desc_index;
+	u8    _recvd[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_conn_type[] = {
+	[0 ... 7] = "unknown",
+	"SFF8470",
+	"SFF8482",
+	"SFF8484",
+	[0x80] = "PCIX_DAUGHTER0",
+	[0x81] = "SAS_DAUGHTER0",
+	[0x82 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+
+static const char *asd_conn_location[] = {
+	"unknown",
+	"internal",
+	"external",
+	"board_to_board",
+};
+#endif
+
+struct asd_ms_conn_desc {
+	u8    type;
+	u8    location;
+	u8    num_sideband_desc;
+	u8    size_sideband_desc;
+	u32   _resvd;
+	u8    name[16];
+	struct asd_ms_sb_desc sb_desc[0];
+} __attribute__ ((packed));
+
+struct asd_nd_phy_desc {
+	u8    vp_attch_type;
+	u8    attch_specific[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_node_type[] = {
+	"IOP",
+	"IO_CONTROLLER",
+	"EXPANDER",
+	"PORT_MULTIPLIER",
+	"PORT_MULTIPLEXER",
+	"MULTI_DROP_I2C_BUS",
+};
+#endif
+
+struct asd_ms_node_desc {
+	u8    type;
+	u8    num_phy_desc;
+	u8    size_phy_desc;
+	u8    _resvd;
+	u8    name[16];
+	struct asd_nd_phy_desc phy_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ms_conn_map {
+	char  sig[2];		  /* 'M', 'C' */
+	__le16 next;
+	u8    maj;		  /* 0 */
+	u8    min;		  /* 0 */
+	__le16 cm_size;		  /* size of this struct */
+	u8    num_conn;
+	u8    conn_size;
+	u8    num_nodes;
+	u8    usage_model_id;
+	u32   _resvd;
+	struct asd_ms_conn_desc conn_desc[0];
+	struct asd_ms_node_desc node_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_entry {
+	u8    sas_addr[SAS_ADDR_SIZE];
+	u8    sas_link_rates;  /* max in hi bits, min in low bits */
+	u8    flags;
+	u8    sata_link_rates;
+	u8    _r[5];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_settings {
+	u8    id0;		  /* P'h'y */
+	u8    _r;
+	u16   next;
+	u8    num_phys;	      /* number of PHYs in the PCI function */
+	u8    _r2[3];
+	struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+struct asd_ll_el {
+	u8   id0;
+	u8   id1;
+	__le16  next;
+	u8   something_here[0];
+} __attribute__ ((packed));
+
+static int asd_poll_flash(struct asd_ha_struct *asd_ha)
+{
+	int c;
+	u8 d;
+
+	for (c = 5000; c > 0; c--) {
+		d  = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+		d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+		if (!d)
+			return 0;
+		udelay(5);
+	}
+	return -ENOENT;
+}
+
+static int asd_reset_flash(struct asd_ha_struct *asd_ha)
+{
+	int err;
+
+	err = asd_poll_flash(asd_ha);
+	if (err)
+		return err;
+	asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET);
+	err = asd_poll_flash(asd_ha);
+
+	return err;
+}
+
+static inline int asd_read_flash_seg(struct asd_ha_struct *asd_ha,
+				     void *buffer, u32 offs, int size)
+{
+	asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs,
+			    size);
+	return 0;
+}
+
+/**
+ * asd_find_flash_dir - finds and reads the flash directory
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to flash directory structure
+ *
+ * If found, the flash directory segment will be copied to
+ * @flash_dir.  Return 1 if found, 0 if not.
+ */
+static int asd_find_flash_dir(struct asd_ha_struct *asd_ha,
+			      struct asd_flash_dir *flash_dir)
+{
+	u32 v;
+	for (v = 0; v < FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) {
+		asd_read_flash_seg(asd_ha, flash_dir, v,
+				   sizeof(FLASH_DIR_COOKIE)-1);
+		if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE,
+			   sizeof(FLASH_DIR_COOKIE)-1) == 0) {
+			asd_ha->hw_prof.flash.dir_offs = v;
+			asd_read_flash_seg(asd_ha, flash_dir, v,
+					   sizeof(*flash_dir));
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int asd_flash_getid(struct asd_ha_struct *asd_ha)
+{
+	int err = 0;
+	u32 reg, inc;
+
+	reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
+
+	if (!(reg & FLASHEX)) {
+		ASD_DPRINTK("flash doesn't exist\n");
+		return -ENOENT;
+	}
+	if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR,
+				  &asd_ha->hw_prof.flash.bar)) {
+		asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n",
+			   pci_name(asd_ha->pcidev));
+		return -ENOENT;
+	}
+	asd_ha->hw_prof.flash.present = 1;
+	asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0;
+	err = asd_reset_flash(asd_ha);
+	if (err) {
+		ASD_DPRINTK("couldn't reset flash(%d)\n", err);
+		return err;
+	}
+	/* Get flash info. This would most likely be AMD Am29LV family flash.
+	 * First try the sequence for word mode.  It is the same as for
+	 * 008B (byte mode only), 160B (word mode) and 800D (word mode).
+	 */
+	reg = asd_ha->hw_prof.flash.bar;
+	inc = asd_ha->hw_prof.flash.wide ? 2 : 1;
+	asd_write_reg_byte(asd_ha, reg + 0x555, 0xAA);
+	asd_write_reg_byte(asd_ha, reg + 0x2AA, 0x55);
+	asd_write_reg_byte(asd_ha, reg + 0x555, 0x90);
+	asd_ha->hw_prof.flash.manuf = asd_read_reg_byte(asd_ha, reg);
+	asd_ha->hw_prof.flash.dev_id= asd_read_reg_byte(asd_ha,reg+inc);
+	asd_ha->hw_prof.flash.sec_prot = asd_read_reg_byte(asd_ha,reg+inc+inc);
+	/* Get out of autoselect mode. */
+	err = asd_reset_flash(asd_ha);
+
+	if (asd_ha->hw_prof.flash.manuf == FLASH_MANUF_AMD) {
+		ASD_DPRINTK("0Found FLASH(%d) manuf:%d, dev_id:0x%x, "
+			    "sec_prot:%d\n",
+			    asd_ha->hw_prof.flash.wide ? 16 : 8,
+			    asd_ha->hw_prof.flash.manuf,
+			    asd_ha->hw_prof.flash.dev_id,
+			    asd_ha->hw_prof.flash.sec_prot);
+		return 0;
+	}
+
+	/* Ok, try the sequence for byte mode of 160B and 800D.
+	 * We may actually never need this.
+	 */
+	asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA);
+	asd_write_reg_byte(asd_ha, reg + 0x555, 0x55);
+	asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90);
+	asd_ha->hw_prof.flash.manuf = asd_read_reg_byte(asd_ha, reg);
+	asd_ha->hw_prof.flash.dev_id = asd_read_reg_byte(asd_ha, reg + 2);
+	asd_ha->hw_prof.flash.sec_prot = asd_read_reg_byte(asd_ha, reg + 4);
+	err = asd_reset_flash(asd_ha);
+
+	if (asd_ha->hw_prof.flash.manuf == FLASH_MANUF_AMD) {
+		ASD_DPRINTK("1Found FLASH(%d) manuf:%d, dev_id:0x%x, "
+			    "sec_prot:%d\n",
+			    asd_ha->hw_prof.flash.wide ? 16 : 8,
+			    asd_ha->hw_prof.flash.manuf,
+			    asd_ha->hw_prof.flash.dev_id,
+			    asd_ha->hw_prof.flash.sec_prot);
+		return 0;
+	}
+
+	return -ENOENT;
+}
+
+static u16 asd_calc_flash_chksum(u16 *p, int size)
+{
+	u16 chksum = 0;
+
+	while (size-- > 0)
+		chksum += *p++;
+
+	return chksum;
+}
+
+
+static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type,
+			     u32 *offs, u32 *size)
+{
+	int i;
+	struct asd_flash_de *de;
+
+	for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) {
+		u32 type = le32_to_cpu(flash_dir->dir_entry[i].type);
+
+		type &= FLASH_DE_TYPE_MASK;
+		if (type == entry_type)
+			break;
+	}
+	if (i >= FLASH_MAX_DIR_ENTRIES)
+		return -ENOENT;
+	de = &flash_dir->dir_entry[i];
+	*offs = le32_to_cpu(de->offs);
+	*size = le32_to_cpu(de->pad_size);
+	return 0;
+}
+
+static int asd_validate_ms(struct asd_manuf_sec *ms)
+{
+	if (ms->sig[0] != 'S' || ms->sig[1] != 'M') {
+		ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n",
+			    ms->sig[0], ms->sig[1]);
+		return -ENOENT;
+	}
+	if (ms->maj != 0) {
+		asd_printk("unsupported manuf. sector. major version:%x\n",
+			   ms->maj);
+		return -ENOENT;
+	}
+	ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next);
+	ms->chksum = le16_to_cpu((__force __le16) ms->chksum);
+	ms->size = le16_to_cpu((__force __le16) ms->size);
+
+	if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) {
+		asd_printk("failed manuf sector checksum\n");
+	}
+
+	return 0;
+}
+
+static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha,
+			       struct asd_manuf_sec *ms)
+{
+	memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE);
+	return 0;
+}
+
+static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha,
+			      struct asd_manuf_sec *ms)
+{
+	memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE);
+	asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0';
+	return 0;
+}
+
+/**
+ * asd_find_ll_by_id - find a linked list entry by its id
+ * @start: void pointer to the first element in the linked list
+ * @id0: the first byte of the id  (offs 0)
+ * @id1: the second byte of the id (offs 1)
+ *
+ * @start has to be the _base_ element start, since the
+ * linked list entries's offset is from this pointer.
+ * Some linked list entries use only the first id, in which case
+ * you can pass 0xFF for the second.
+ */
+static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1)
+{
+	struct asd_ll_el *el = start;
+
+	do {
+		switch (id1) {
+		default:
+			if (el->id1 == id1)
+		case 0xFF:
+				if (el->id0 == id0)
+					return el;
+		}
+		el = start + le16_to_cpu(el->next);
+	} while (el != start);
+
+	return NULL;
+}
+
+/**
+ * asd_ms_get_phy_params - get phy parameters from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @manuf_sec: pointer to the manufacturing sector
+ *
+ * The manufacturing sector contans also the linked list of sub-segments,
+ * since when it was read, its size was taken from the flash directory,
+ * not from the structure size.
+ *
+ * HIDDEN phys do not count in the total count.  REPORTED phys cannot
+ * be enabled but are reported and counted towards the total.
+ * ENEBLEABLE phys are enabled by default and count towards the total.
+ * The absolute total phy number is ASD_MAX_PHYS.  hw_prof->num_phys
+ * merely specifies the number of phys the host adapter decided to
+ * report.  E.g., it is possible for phys 0, 1 and 2 to be HIDDEN,
+ * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENEBLEABLE.
+ * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2
+ * are actually enabled (enabled by default, max number of phys
+ * enableable in this case).
+ */
+static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha,
+				 struct asd_manuf_sec *manuf_sec)
+{
+	int i;
+	int en_phys = 0;
+	int rep_phys = 0;
+	struct asd_manuf_phy_param *phy_param;
+	struct asd_manuf_phy_param dflt_phy_param;
+
+	phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M');
+	if (!phy_param) {
+		ASD_DPRINTK("ms: no phy parameters found\n");
+		ASD_DPRINTK("ms: Creating default phy parameters\n");
+		dflt_phy_param.sig[0] = 'P';
+		dflt_phy_param.sig[1] = 'M';
+		dflt_phy_param.maj = 0;
+		dflt_phy_param.min = 2;
+		dflt_phy_param.num_phy_desc = 8;
+		dflt_phy_param.phy_desc_size = sizeof(struct asd_manuf_phy_desc);
+		for (i =0; i < ASD_MAX_PHYS; i++) {
+			dflt_phy_param.phy_desc[i].state = 0;
+			dflt_phy_param.phy_desc[i].phy_id = i;
+			dflt_phy_param.phy_desc[i].phy_control_0 = 0xf6;
+			dflt_phy_param.phy_desc[i].phy_control_1 = 0x10;
+			dflt_phy_param.phy_desc[i].phy_control_2 = 0x43;
+			dflt_phy_param.phy_desc[i].phy_control_3 = 0xeb;
+		}
+
+		phy_param = &dflt_phy_param;
+
+	}
+
+	if (phy_param->maj != 0) {
+		asd_printk("unsupported manuf. phy param major version:0x%x\n",
+			   phy_param->maj);
+		return -ENOENT;
+	}
+
+	ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc);
+	asd_ha->hw_prof.enabled_phys = 0;
+	for (i = 0; i < phy_param->num_phy_desc; i++) {
+		struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i];
+		switch (pd->state & 0xF) {
+		case MS_PHY_STATE_HIDDEN:
+			ASD_DPRINTK("ms: phy%d: HIDDEN\n", i);
+			continue;
+		case MS_PHY_STATE_REPORTED:
+			ASD_DPRINTK("ms: phy%d: REPORTED\n", i);
+			asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+			rep_phys++;
+			continue;
+		case MS_PHY_STATE_ENABLEABLE:
+			ASD_DPRINTK("ms: phy%d: ENEBLEABLE\n", i);
+			asd_ha->hw_prof.enabled_phys |= (1 << i);
+			en_phys++;
+			break;
+		}
+		asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0;
+		asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1;
+		asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2;
+		asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3;
+	}
+	asd_ha->hw_prof.max_phys = rep_phys + en_phys;
+	asd_ha->hw_prof.num_phys = en_phys;
+	ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n",
+		    asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys);
+	ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys);
+	return 0;
+}
+
+static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha,
+				    struct asd_manuf_sec *manuf_sec)
+{
+	struct asd_ms_conn_map *cm;
+
+	cm = asd_find_ll_by_id(manuf_sec, 'M', 'C');
+	if (!cm) {
+		ASD_DPRINTK("ms: no connector map found\n");
+		return 0;
+	}
+
+	if (cm->maj != 0) {
+		ASD_DPRINTK("ms: unsupported: connector map major version 0x%x"
+			    "\n", cm->maj);
+		return -ENOENT;
+	}
+
+	/* XXX */
+
+	return 0;
+}
+
+
+/**
+ * asd_process_ms - find and extract information from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ms(struct asd_ha_struct *asd_ha,
+			  struct asd_flash_dir *flash_dir)
+{
+	int err;
+	struct asd_manuf_sec *manuf_sec;
+	u32 offs, size;
+
+	err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size);
+	if (err) {
+		ASD_DPRINTK("Couldn't find the manuf. sector\n");
+		goto out;
+	}
+
+	if (size == 0)
+		goto out;
+
+	err = -ENOMEM;
+	manuf_sec = kmalloc(size, GFP_KERNEL);
+	if (!manuf_sec) {
+		ASD_DPRINTK("no mem for manuf sector\n");
+		goto out;
+	}
+
+	err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size);
+	if (err) {
+		ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n",
+			    offs, size);
+		goto out2;
+	}
+
+	err = asd_validate_ms(manuf_sec);
+	if (err) {
+		ASD_DPRINTK("couldn't validate manuf sector\n");
+		goto out2;
+	}
+
+	err = asd_ms_get_sas_addr(asd_ha, manuf_sec);
+	if (err) {
+		ASD_DPRINTK("couldn't read the SAS_ADDR\n");
+		goto out2;
+	}
+	ASD_DPRINTK("manuf sect SAS_ADDR %llx\n",
+		    SAS_ADDR(asd_ha->hw_prof.sas_addr));
+
+	err = asd_ms_get_pcba_sn(asd_ha, manuf_sec);
+	if (err) {
+		ASD_DPRINTK("couldn't read the PCBA SN\n");
+		goto out2;
+	}
+	ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn);
+
+	err = asd_ms_get_phy_params(asd_ha, manuf_sec);
+	if (err) {
+		ASD_DPRINTK("ms: couldn't get phy parameters\n");
+		goto out2;
+	}
+
+	err = asd_ms_get_connector_map(asd_ha, manuf_sec);
+	if (err) {
+		ASD_DPRINTK("ms: couldn't get connector map\n");
+		goto out2;
+	}
+
+out2:
+	kfree(manuf_sec);
+out:
+	return err;
+}
+
+static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha,
+					  struct asd_ctrla_phy_settings *ps)
+{
+	int i;
+	for (i = 0; i < ps->num_phys; i++) {
+		struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i];
+
+		if (!PHY_ENABLED(asd_ha, i))
+			continue;
+		if (*(u64 *)pe->sas_addr == 0) {
+			asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+			continue;
+		}
+		/* This is the SAS address which should be sent in IDENTIFY. */
+		memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr,
+		       SAS_ADDR_SIZE);
+		asd_ha->hw_prof.phy_desc[i].max_sas_lrate =
+			(pe->sas_link_rates & 0xF0) >> 4;
+		asd_ha->hw_prof.phy_desc[i].min_sas_lrate =
+			(pe->sas_link_rates & 0x0F);
+		asd_ha->hw_prof.phy_desc[i].max_sata_lrate =
+			(pe->sata_link_rates & 0xF0) >> 4;
+		asd_ha->hw_prof.phy_desc[i].min_sata_lrate =
+			(pe->sata_link_rates & 0x0F);
+		asd_ha->hw_prof.phy_desc[i].flags = pe->flags;
+		ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x,"
+			    " sata rate:0x%x-0x%x, flags:0x%x\n",
+			    i,
+			    SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr),
+			    asd_ha->hw_prof.phy_desc[i].max_sas_lrate,
+			    asd_ha->hw_prof.phy_desc[i].min_sas_lrate,
+			    asd_ha->hw_prof.phy_desc[i].max_sata_lrate,
+			    asd_ha->hw_prof.phy_desc[i].min_sata_lrate,
+			    asd_ha->hw_prof.phy_desc[i].flags);
+	}
+
+	return 0;
+}
+
+/**
+ * asd_process_ctrl_a_user - process CTRL-A user settings
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha,
+				   struct asd_flash_dir *flash_dir)
+{
+	int err, i;
+	u32 offs, size;
+	struct asd_ll_el *el;
+	struct asd_ctrla_phy_settings *ps;
+	struct asd_ctrla_phy_settings dflt_ps;
+
+	err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size);
+	if (err) {
+		ASD_DPRINTK("couldn't find CTRL-A user settings section\n");
+		ASD_DPRINTK("Creating default CTRL-A user settings section\n");
+
+		dflt_ps.id0 = 'h';
+		dflt_ps.num_phys = 8;
+		for (i =0; i < ASD_MAX_PHYS; i++) {
+			memcpy(dflt_ps.phy_ent[i].sas_addr,
+			       asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE);
+			dflt_ps.phy_ent[i].sas_link_rates = 0x98;
+			dflt_ps.phy_ent[i].flags = 0x0;
+			dflt_ps.phy_ent[i].sata_link_rates = 0x0;
+		}
+
+		size = sizeof(struct asd_ctrla_phy_settings);
+		ps = &dflt_ps;
+	}
+
+	if (size == 0)
+		goto out;
+
+	err = -ENOMEM;
+	el = kmalloc(size, GFP_KERNEL);
+	if (!el) {
+		ASD_DPRINTK("no mem for ctrla user settings section\n");
+		goto out;
+	}
+
+	err = asd_read_flash_seg(asd_ha, (void *)el, offs, size);
+	if (err) {
+		ASD_DPRINTK("couldn't read ctrla phy settings section\n");
+		goto out2;
+	}
+
+	err = -ENOENT;
+	ps = asd_find_ll_by_id(el, 'h', 0xFF);
+	if (!ps) {
+		ASD_DPRINTK("couldn't find ctrla phy settings struct\n");
+		goto out2;
+	}
+
+	err = asd_process_ctrla_phy_settings(asd_ha, ps);
+	if (err) {
+		ASD_DPRINTK("couldn't process ctrla phy settings\n");
+		goto out2;
+	}
+out2:
+	kfree(el);
+out:
+	return err;
+}
+
+/**
+ * asd_read_flash - read flash memory
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_flash(struct asd_ha_struct *asd_ha)
+{
+	int err;
+	struct asd_flash_dir *flash_dir;
+
+	err = asd_flash_getid(asd_ha);
+	if (err)
+		return err;
+
+	flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL);
+	if (!flash_dir)
+		return -ENOMEM;
+
+	err = -ENOENT;
+	if (!asd_find_flash_dir(asd_ha, flash_dir)) {
+		ASD_DPRINTK("couldn't find flash directory\n");
+		goto out;
+	}
+
+	if (le32_to_cpu(flash_dir->rev) != 2) {
+		asd_printk("unsupported flash dir version:0x%x\n",
+			   le32_to_cpu(flash_dir->rev));
+		goto out;
+	}
+
+	err = asd_process_ms(asd_ha, flash_dir);
+	if (err) {
+		ASD_DPRINTK("couldn't process manuf sector settings\n");
+		goto out;
+	}
+
+	err = asd_process_ctrl_a_user(asd_ha, flash_dir);
+	if (err) {
+		ASD_DPRINTK("couldn't process CTRL-A user settings\n");
+		goto out;
+	}
+
+out:
+	kfree(flash_dir);
+	return err;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
new file mode 100644
index 000000000000..9050c6f3f6bd
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -0,0 +1,1401 @@
+/*
+ * Aic94xx SAS/SATA driver sequencer interface.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * Parts of this code adapted from David Chaw's adp94xx_seq.c.
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+
+#include "aic94xx_seq.h"
+#include "aic94xx_dump.h"
+
+/* It takes no more than 0.05 us for an instruction
+ * to complete. So waiting for 1 us should be more than
+ * plenty.
+ */
+#define PAUSE_DELAY 1
+#define PAUSE_TRIES 1000
+
+static const struct firmware *sequencer_fw;
+static const char *sequencer_version;
+static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task,
+	cseq_idle_loop, lseq_idle_loop;
+static u8 *cseq_code, *lseq_code;
+static u32 cseq_code_size, lseq_code_size;
+
+static u16 first_scb_site_no = 0xFFFF;
+static u16 last_scb_site_no;
+
+/* ---------- Pause/Unpause CSEQ/LSEQ ---------- */
+
+/**
+ * asd_pause_cseq - pause the central sequencer
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_pause_cseq(struct asd_ha_struct *asd_ha)
+{
+	int	count = PAUSE_TRIES;
+	u32	arp2ctl;
+
+	arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+	if (arp2ctl & PAUSED)
+		return 0;
+
+	asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE);
+	do {
+		arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+		if (arp2ctl & PAUSED)
+			return 0;
+		udelay(PAUSE_DELAY);
+	} while (--count > 0);
+
+	ASD_DPRINTK("couldn't pause CSEQ\n");
+	return -1;
+}
+
+/**
+ * asd_unpause_cseq - unpause the central sequencer.
+ * @asd_ha: pointer to host adapter structure.
+ *
+ * Return 0 on success, negative on error.
+ */
+int asd_unpause_cseq(struct asd_ha_struct *asd_ha)
+{
+	u32	arp2ctl;
+	int	count = PAUSE_TRIES;
+
+	arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+	if (!(arp2ctl & PAUSED))
+		return 0;
+
+	asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE);
+	do {
+		arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+		if (!(arp2ctl & PAUSED))
+			return 0;
+		udelay(PAUSE_DELAY);
+	} while (--count > 0);
+
+	ASD_DPRINTK("couldn't unpause the CSEQ\n");
+	return -1;
+}
+
+/**
+ * asd_seq_pause_lseq - pause a link sequencer
+ * @asd_ha: pointer to a host adapter structure
+ * @lseq: link sequencer of interest
+ *
+ * Return 0 on success, negative on error.
+ */
+static inline int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+	u32    arp2ctl;
+	int    count = PAUSE_TRIES;
+
+	arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+	if (arp2ctl & PAUSED)
+		return 0;
+
+	asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE);
+	do {
+		arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+		if (arp2ctl & PAUSED)
+			return 0;
+		udelay(PAUSE_DELAY);
+	} while (--count > 0);
+
+	ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq);
+	return -1;
+}
+
+/**
+ * asd_pause_lseq - pause the link sequencer(s)
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of link sequencers of interest
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+	int lseq;
+	int err = 0;
+
+	for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+		err = asd_seq_pause_lseq(asd_ha, lseq);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+/**
+ * asd_seq_unpause_lseq - unpause a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @lseq: link sequencer of interest
+ *
+ * Return 0 on success, negative on error.
+ */
+static inline int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+	u32 arp2ctl;
+	int count = PAUSE_TRIES;
+
+	arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+	if (!(arp2ctl & PAUSED))
+		return 0;
+
+	asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE);
+	do {
+		arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+		if (!(arp2ctl & PAUSED))
+			return 0;
+		udelay(PAUSE_DELAY);
+	} while (--count > 0);
+
+	ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq);
+	return 0;
+}
+
+
+/**
+ * asd_unpause_lseq - unpause the link sequencer(s)
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of link sequencers of interest
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+	int lseq;
+	int err = 0;
+
+	for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+		err = asd_seq_unpause_lseq(asd_ha, lseq);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+/* ---------- Downloading CSEQ/LSEQ microcode ---------- */
+
+static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+			   u32 size)
+{
+	u32 addr = CSEQ_RAM_REG_BASE_ADR;
+	const u32 *prog = (u32 *) _prog;
+	u32 i;
+
+	for (i = 0; i < size; i += 4, prog++, addr += 4) {
+		u32 val = asd_read_reg_dword(asd_ha, addr);
+
+		if (le32_to_cpu(*prog) != val) {
+			asd_printk("%s: cseq verify failed at %u "
+				   "read:0x%x, wanted:0x%x\n",
+				   pci_name(asd_ha->pcidev),
+				   i, val, le32_to_cpu(*prog));
+			return -1;
+		}
+	}
+	ASD_DPRINTK("verified %d bytes, passed\n", size);
+	return 0;
+}
+
+/**
+ * asd_verify_lseq - verify the microcode of a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @_prog: pointer to the microcode
+ * @size: size of the microcode in bytes
+ * @lseq: link sequencer of interest
+ *
+ * The link sequencer code is accessed in 4 KB pages, which are selected
+ * by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register.
+ * The 10 KB LSEQm instruction code is mapped, page at a time, at
+ * LmSEQRAM address.
+ */
+static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+			   u32 size, int lseq)
+{
+#define LSEQ_CODEPAGE_SIZE 4096
+	int pages =  (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE;
+	u32 page;
+	const u32 *prog = (u32 *) _prog;
+
+	for (page = 0; page < pages; page++) {
+		u32 i;
+
+		asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq),
+				    page << LmRAMPAGE_LSHIFT);
+		for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE;
+		     i += 4, prog++, size-=4) {
+
+			u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i);
+
+			if (le32_to_cpu(*prog) != val) {
+				asd_printk("%s: LSEQ%d verify failed "
+					   "page:%d, offs:%d\n",
+					   pci_name(asd_ha->pcidev),
+					   lseq, page, i);
+				return -1;
+			}
+		}
+	}
+	ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq,
+		    (int)((u8 *)prog-_prog));
+	return 0;
+}
+
+/**
+ * asd_verify_seq -- verify CSEQ/LSEQ microcode
+ * @asd_ha: pointer to host adapter structure
+ * @prog: pointer to microcode
+ * @size: size of the microcode
+ * @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest
+ *
+ * Return 0 if microcode is correct, negative on mismatch.
+ */
+static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog,
+			      u32 size, u8 lseq_mask)
+{
+	if (lseq_mask == 0)
+		return asd_verify_cseq(asd_ha, prog, size);
+	else {
+		int lseq, err;
+
+		for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+			err = asd_verify_lseq(asd_ha, prog, size, lseq);
+			if (err)
+				return err;
+		}
+	}
+
+	return 0;
+}
+#define ASD_DMA_MODE_DOWNLOAD
+#ifdef ASD_DMA_MODE_DOWNLOAD
+/* This is the size of the CSEQ Mapped instruction page */
+#define MAX_DMA_OVLY_COUNT ((1U << 14)-1)
+static int asd_download_seq(struct asd_ha_struct *asd_ha,
+			    const u8 * const prog, u32 size, u8 lseq_mask)
+{
+	u32 comstaten;
+	u32 reg;
+	int page;
+	const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT;
+	struct asd_dma_tok *token;
+	int err = 0;
+
+	if (size % 4) {
+		asd_printk("sequencer program not multiple of 4\n");
+		return -1;
+	}
+
+	asd_pause_cseq(asd_ha);
+	asd_pause_lseq(asd_ha, 0xFF);
+
+	/* save, disable and clear interrupts */
+	comstaten = asd_read_reg_dword(asd_ha, COMSTATEN);
+	asd_write_reg_dword(asd_ha, COMSTATEN, 0);
+	asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK);
+
+	asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
+	asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK);
+
+	token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL);
+	if (!token) {
+		asd_printk("out of memory for dma SEQ download\n");
+		err = -ENOMEM;
+		goto out;
+	}
+	ASD_DPRINTK("dma-ing %d bytes\n", size);
+
+	for (page = 0; page < pages; page++) {
+		int i;
+		u32 left = min(size-page*MAX_DMA_OVLY_COUNT,
+			       (u32)MAX_DMA_OVLY_COUNT);
+
+		memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left);
+		asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle);
+		asd_write_reg_dword(asd_ha, OVLYDMACNT, left);
+		reg = !page ? RESETOVLYDMA : 0;
+		reg |= (STARTOVLYDMA | OVLYHALTERR);
+		reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
+		/* Start DMA. */
+		asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+		for (i = PAUSE_TRIES*100; i > 0; i--) {
+			u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL);
+			if (!(dmadone & OVLYDMAACT))
+				break;
+			udelay(PAUSE_DELAY);
+		}
+	}
+
+	reg = asd_read_reg_dword(asd_ha, COMSTAT);
+	if (!(reg & OVLYDMADONE) || (reg & OVLYERR)
+	    || (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){
+		asd_printk("%s: error DMA-ing sequencer code\n",
+			   pci_name(asd_ha->pcidev));
+		err = -ENODEV;
+	}
+
+	asd_free_coherent(asd_ha, token);
+ out:
+	asd_write_reg_dword(asd_ha, COMSTATEN, comstaten);
+
+	return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask);
+}
+#else /* ASD_DMA_MODE_DOWNLOAD */
+static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+			    u32 size, u8 lseq_mask)
+{
+	int i;
+	u32 reg = 0;
+	const u32 *prog = (u32 *) _prog;
+
+	if (size % 4) {
+		asd_printk("sequencer program not multiple of 4\n");
+		return -1;
+	}
+
+	asd_pause_cseq(asd_ha);
+	asd_pause_lseq(asd_ha, 0xFF);
+
+	reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
+	reg |= PIOCMODE;
+
+	asd_write_reg_dword(asd_ha, OVLYDMACNT, size);
+	asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+	ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n",
+		    lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : "");
+
+	for (i = 0; i < size; i += 4, prog++)
+		asd_write_reg_dword(asd_ha, SPIODATA, *prog);
+
+	reg = (reg & ~PIOCMODE) | OVLYHALTERR;
+	asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+	return asd_verify_seq(asd_ha, _prog, size, lseq_mask);
+}
+#endif /* ASD_DMA_MODE_DOWNLOAD */
+
+/**
+ * asd_seq_download_seqs - download the sequencer microcode
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Download the central and link sequencer microcode.
+ */
+static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha)
+{
+	int 	err;
+
+	if (!asd_ha->hw_prof.enabled_phys) {
+		asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev));
+		return -ENODEV;
+	}
+
+	/* Download the CSEQ */
+	ASD_DPRINTK("downloading CSEQ...\n");
+	err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0);
+	if (err) {
+		asd_printk("CSEQ download failed:%d\n", err);
+		return err;
+	}
+
+	/* Download the Link Sequencers code. All of the Link Sequencers
+	 * microcode can be downloaded at the same time.
+	 */
+	ASD_DPRINTK("downloading LSEQs...\n");
+	err = asd_download_seq(asd_ha, lseq_code, lseq_code_size,
+			       asd_ha->hw_prof.enabled_phys);
+	if (err) {
+		/* Try it one at a time */
+		u8 lseq;
+		u8 lseq_mask = asd_ha->hw_prof.enabled_phys;
+
+		for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+			err = asd_download_seq(asd_ha, lseq_code,
+					       lseq_code_size, 1<<lseq);
+			if (err)
+				break;
+		}
+	}
+	if (err)
+		asd_printk("LSEQs download failed:%d\n", err);
+
+	return err;
+}
+
+/* ---------- Initializing the chip, chip memory, etc. ---------- */
+
+/**
+ * asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha)
+{
+	/* CSEQ Mode Independent, page 4 setup. */
+	asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_REG0, 0);
+	asd_write_reg_word(asd_ha, CSEQ_REG1, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_REG2, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0);
+	{
+		u8 con = asd_read_reg_byte(asd_ha, CCONEXIST);
+		u8 val = hweight8(con);
+		asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val);
+	}
+	asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0);
+
+	/* CSEQ Mode independent, page 5 setup. */
+	asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0);
+	asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0);
+
+	/* CSEQ Mode independent, page 6 setup. */
+	asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0);
+	asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0);
+	asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0);
+	asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0);
+	asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0);
+	asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF);
+	/* Calculate the free scb mask. */
+	{
+		u16 cmdctx = asd_get_cmdctx_size(asd_ha);
+		cmdctx = (~((cmdctx/128)-1)) >> 8;
+		asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx);
+	}
+	asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD,
+			   first_scb_site_no);
+	asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL,
+			   last_scb_site_no);
+	asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF);
+
+	/* CSEQ Mode independent, page 7 setup. */
+	asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0);
+	asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0);
+	asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0);
+}
+
+/**
+ * asd_init_cseq_mdp - initialize CSEQ Mode dependent pages
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
+{
+	int	i;
+	int	moffs;
+
+	moffs = CSEQ_PAGE_SIZE * 2;
+
+	/* CSEQ Mode dependent, modes 0-7, page 0 setup. */
+	for (i = 0; i < 8; i++) {
+		asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0);
+		asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0);
+		asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF);
+		asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF);
+		asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0);
+	}
+
+	/* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */
+
+	/* CSEQ Mode dependent, mode 8, page 0 setup. */
+	asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF);
+	asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0);
+	asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0);
+	asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0);
+	asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0);
+	asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0);
+	asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0);
+	asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0);
+	asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0);
+	asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0);
+	asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0);
+	asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE,
+			   (u16)last_scb_site_no+1);
+	asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE,
+			   (u16)asd_ha->hw_prof.max_ddbs);
+
+	/* CSEQ Mode dependent, mode 8, page 1 setup. */
+	asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0);
+	asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0);
+
+	/* CSEQ Mode dependent, mode 8, page 2 setup. */
+	/* Tell the sequencer the bus address of the first SCB. */
+	asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER,
+			   asd_ha->seq.next_scb.dma_handle);
+	ASD_DPRINTK("First SCB dma_handle: 0x%llx\n",
+		    (unsigned long long)asd_ha->seq.next_scb.dma_handle);
+
+	/* Tell the sequencer the first Done List entry address. */
+	asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE,
+			   asd_ha->seq.actual_dl->dma_handle);
+
+	/* Initialize the Q_DONE_POINTER with the least significant
+	 * 4 bytes of the first Done List address. */
+	asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER,
+			    ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle));
+
+	asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE);
+
+	/* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */
+}
+
+/**
+ * asd_init_cseq_scratch -- setup and init CSEQ
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Setup and initialize Central sequencers. Initialiaze the mode
+ * independent and dependent scratch page to the default settings.
+ */
+static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
+{
+	asd_init_cseq_mip(asd_ha);
+	asd_init_cseq_mdp(asd_ha);
+}
+
+/**
+ * asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq)
+{
+	int i;
+
+	/* LSEQ Mode independent page 0 setup. */
+	asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF);
+	asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq);
+	asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq),
+			   ASD_NOTIFY_ENABLE_SPINUP);
+	asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000);
+	asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0);
+
+	/* LSEQ Mode independent page 1 setup. */
+	asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF);
+	asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF);
+	asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF);
+	asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0);
+
+	/* LSEQ Mode Independent page 2 setup. */
+	asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF);
+	asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF);
+	asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF);
+	asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0);
+	for (i = 0; i < 12; i += 4)
+		asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0);
+
+	/* LSEQ Mode Independent page 3 setup. */
+
+	/* Device present timer timeout */
+	asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq),
+			    ASD_DEV_PRESENT_TIMEOUT);
+
+	/* SATA interlock timer disabled */
+	asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq),
+			    ASD_SATA_INTERLOCK_TIMEOUT);
+
+	/* STP shutdown timer timeout constant, IGNORED by the sequencer,
+	 * always 0. */
+	asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq),
+			    ASD_STP_SHUTDOWN_TIMEOUT);
+
+	asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq),
+			    ASD_SRST_ASSERT_TIMEOUT);
+
+	asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq),
+			    ASD_RCV_FIS_TIMEOUT);
+
+	asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq),
+			    ASD_ONE_MILLISEC_TIMEOUT);
+
+	/* COM_INIT timer */
+	asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq),
+			    ASD_TEN_MILLISEC_TIMEOUT);
+
+	asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq),
+			    ASD_SMP_RCV_TIMEOUT);
+}
+
+/**
+ * asd_init_lseq_mdp -- initialize LSEQ mode dependent pages.
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha,  int lseq)
+{
+	int    i;
+	u32    moffs;
+	u16 ret_addr[] = {
+		0xFFFF,		  /* mode 0 */
+		0xFFFF,		  /* mode 1 */
+		mode2_task,	  /* mode 2 */
+		0,
+		0xFFFF,		  /* mode 4/5 */
+		0xFFFF,		  /* mode 4/5 */
+	};
+
+	/*
+	 * Mode 0,1,2 and 4/5 have common field on page 0 for the first
+	 * 14 bytes.
+	 */
+	for (i = 0; i < 3; i++) {
+		moffs = i * LSEQ_MODE_SCRATCH_SIZE;
+		asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs,
+				   ret_addr[i]);
+		asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0);
+		asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0);
+		asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF);
+		asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF);
+		asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0);
+		asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0);
+	}
+	/*
+	 *  Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3.
+	 */
+	asd_write_reg_word(asd_ha,
+			 LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET,
+			   ret_addr[5]);
+	asd_write_reg_word(asd_ha,
+			 LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
+	asd_write_reg_word(asd_ha,
+			 LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
+	asd_write_reg_word(asd_ha,
+			 LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
+	asd_write_reg_word(asd_ha,
+			 LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
+	asd_write_reg_byte(asd_ha,
+		         LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
+	asd_write_reg_word(asd_ha,
+		         LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
+
+	/* LSEQ Mode dependent 0, page 0 setup. */
+	asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq),
+			   (u16)asd_ha->hw_prof.max_ddbs);
+	asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq),
+			   (u16)last_scb_site_no+1);
+	asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq),
+			    (u16) LmM0INTEN_MASK & 0xFFFF0000 >> 16);
+	asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2,
+			    (u16) LmM0INTEN_MASK & 0xFFFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0);
+
+	/* LSEQ mode dependent, mode 1, page 0 setup. */
+	asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF);
+	asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0);
+
+	/* LSEQ Mode dependent mode 2, page 0 setup */
+	asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0);
+
+	/* LSEQ Mode dependent, mode 4/5, page 0 setup. */
+	asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
+	/*
+	 * Set the desired interval between transmissions of the NOTIFY
+	 * (ENABLE SPINUP) primitive.  Must be initilized to val - 1.
+	 */
+	asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
+			   ASD_NOTIFY_TIMEOUT - 1);
+	/* No delay for the first NOTIFY to be sent to the attached target. */
+	asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq),
+			   ASD_NOTIFY_DOWN_COUNT);
+
+	/* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
+	for (i = 0; i < 2; i++)	{
+		int j;
+		/* Start from Page 1 of Mode 0 and 1. */
+		moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
+		/* All the fields of page 1 can be intialized to 0. */
+		for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
+			asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
+	}
+
+	/* LSEQ Mode dependent, mode 2, page 1 setup. */
+	asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0);
+
+	/* LSEQ Mode dependent, mode 4/5, page 1. */
+	for (i = 0; i < LSEQ_PAGE_SIZE; i+=4)
+		asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF);
+	asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF);
+	asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF);
+
+	/* LSEQ Mode dependent, mode 0, page 2 setup. */
+	asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0);
+	asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0);
+	asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0);
+
+	/* LSEQ Mode Dependent 1, page 2 setup. */
+	asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0);
+
+	/* LSEQ Mode Dependent 2, page 2 setup. */
+	/* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer,
+	 * i.e. always 0. */
+	asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0);
+	asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0);
+	asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0);
+
+	/* LSEQ Mode Dependent 4/5, page 2 setup. */
+	asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0);
+	asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq),	0);
+}
+
+/**
+ * asd_init_lseq_scratch -- setup and init link sequencers
+ * @asd_ha: pointer to host adapter struct
+ */
+static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha)
+{
+	u8 lseq;
+	u8 lseq_mask;
+
+	lseq_mask = asd_ha->hw_prof.enabled_phys;
+	for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+		asd_init_lseq_mip(asd_ha, lseq);
+		asd_init_lseq_mdp(asd_ha, lseq);
+	}
+}
+
+/**
+ * asd_init_scb_sites -- initialize sequencer SCB sites (memory).
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This should be done before initializing common CSEQ and LSEQ
+ * scratch since those areas depend on some computed values here,
+ * last_scb_site_no, etc.
+ */
+static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
+{
+	u16	site_no;
+	u16     max_scbs = 0;
+
+	for (site_no = asd_ha->hw_prof.max_scbs-1;
+	     site_no != (u16) -1;
+	     site_no--) {
+		u16	i;
+
+		/* Initialize all fields in the SCB site to 0. */
+		for (i = 0; i < ASD_SCB_SIZE; i += 4)
+			asd_scbsite_write_dword(asd_ha, site_no, i, 0);
+
+		/* Workaround needed by SEQ to fix a SATA issue is to exclude
+		 * certain SCB sites from the free list. */
+		if (!SCB_SITE_VALID(site_no))
+			continue;
+
+		if (last_scb_site_no == 0)
+			last_scb_site_no = site_no;
+
+		/* For every SCB site, we need to initialize the
+		 * following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS,
+		 * and SG Element Flag. */
+
+		/* Q_NEXT field of the last SCB is invalidated. */
+		asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no);
+
+		/* Initialize SCB Site Opcode field to invalid. */
+		asd_scbsite_write_byte(asd_ha, site_no,
+				       offsetof(struct scb_header, opcode),
+				       0xFF);
+
+		/* Initialize SCB Site Flags field to mean a response
+		 * frame has been received.  This means inadvertent
+		 * frames received to be dropped. */
+		asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
+
+		first_scb_site_no = site_no;
+		max_scbs++;
+	}
+	asd_ha->hw_prof.max_scbs = max_scbs;
+	ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs);
+	ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no);
+	ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no);
+}
+
+/**
+ * asd_init_cseq_cio - initialize CSEQ CIO registers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
+{
+	int i;
+
+	asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0);
+	asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS);
+	asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0);
+	asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0);
+	asd_ha->seq.scbpro = 0;
+	asd_write_reg_dword(asd_ha, SCBPRO, 0);
+	asd_write_reg_dword(asd_ha, CSEQCON, 0);
+
+	/* Intialize CSEQ Mode 11 Interrupt Vectors.
+	 * The addresses are 16 bit wide and in dword units.
+	 * The values of their macros are in byte units.
+	 * Thus we have to divide by 4. */
+	asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]);
+	asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]);
+	asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]);
+
+	/* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
+	asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC);
+
+	/* Initialize CSEQ Scratch Page to 0x04. */
+	asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04);
+
+	/* Initialize CSEQ Mode[0-8] Dependent registers. */
+	/* Initialize Scratch Page to 0. */
+	for (i = 0; i < 9; i++)
+		asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0);
+
+	/* Reset the ARP2 Program Count. */
+	asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
+
+	for (i = 0; i < 8; i++) {
+		/* Intialize Mode n Link m Interrupt Enable. */
+		asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
+		/* Initialize Mode n Request Mailbox. */
+		asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
+	}
+}
+
+/**
+ * asd_init_lseq_cio -- initialize LmSEQ CIO registers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq)
+{
+	u8  *sas_addr;
+	int  i;
+
+	/* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
+	asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC);
+
+	asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0);
+
+	/* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */
+	for (i = 0; i < 3; i++)
+		asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0);
+
+	/* Initialize Mode 5 SCRATCHPAGE to 0. */
+	asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0);
+
+	asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0);
+	/* Initialize Mode 0,1,2 and 5 Interrupt Enable and
+	 * Interrupt registers. */
+	asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK);
+	asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF);
+	/* Mode 1 */
+	asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK);
+	asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF);
+	/* Mode 2 */
+	asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK);
+	asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF);
+	/* Mode 5 */
+	asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK);
+	asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF);
+
+	/* Enable HW Timer status. */
+	asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK);
+
+	/* Enable Primitive Status 0 and 1. */
+	asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK);
+	asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK);
+
+	/* Enable Frame Error. */
+	asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK);
+	asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50);
+
+	/* Initialize Mode 0 Transfer Level to 512. */
+	asd_write_reg_byte(asd_ha,  LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512);
+	/* Initialize Mode 1 Transfer Level to 256. */
+	asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256);
+
+	/* Initialize Program Count. */
+	asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
+
+	/* Enable Blind SG Move. */
+	asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48);
+	asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq),
+			   ASD_SATA_INTERLOCK_TIMEOUT);
+
+	(void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq));
+
+	/* Clear Primitive Status 0 and 1. */
+	asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF);
+	asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF);
+
+	/* Clear HW Timer status. */
+	asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF);
+
+	/* Clear DMA Errors for Mode 0 and 1. */
+	asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF);
+	asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF);
+
+	/* Clear SG DMA Errors for Mode 0 and 1. */
+	asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF);
+	asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF);
+
+	/* Clear Mode 0 Buffer Parity Error. */
+	asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR);
+
+	/* Clear Mode 0 Frame Error register. */
+	asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF);
+
+	/* Reset LSEQ external interrupt arbiter. */
+	asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL);
+
+	/* Set the Phy SAS for the LmSEQ WWN. */
+	sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr;
+	for (i = 0; i < SAS_ADDR_SIZE; i++)
+		asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]);
+
+	/* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */
+	asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0);
+
+	/* Set the Bus Inactivity Time Limit Timer. */
+	asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9);
+
+	/* Enable SATA Port Multiplier. */
+	asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80);
+
+	/* Initialize Interrupt Vector[0-10] address in Mode 3.
+	 * See the comment on CSEQ_INT_* */
+	asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]);
+	asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]);
+	/*
+	 * Program the Link LED control, applicable only for
+	 * Chip Rev. B or later.
+	 */
+	asd_write_reg_dword(asd_ha, LmCONTROL(lseq),
+			    (LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms));
+
+	/* Set the Align Rate for SAS and STP mode. */
+	asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT);
+	asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT);
+}
+
+
+/**
+ * asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox
+ * @asd_ha: pointer to host adapter struct
+ */
+static void asd_post_init_cseq(struct asd_ha_struct *asd_ha)
+{
+	int i;
+
+	for (i = 0; i < 8; i++)
+		asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF);
+	for (i = 0; i < 8; i++)
+		asd_read_reg_dword(asd_ha, CMnRSPMBX(i));
+	/* Reset the external interrupt arbiter. */
+	asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL);
+}
+
+/**
+ * asd_init_ddb_0 -- initialize DDB 0
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Initialize DDB site 0 which is used internally by the sequencer.
+ */
+static void asd_init_ddb_0(struct asd_ha_struct *asd_ha)
+{
+	int	i;
+
+	/* Zero out the DDB explicitly */
+	for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4)
+		asd_ddbsite_write_dword(asd_ha, 0, i, 0);
+
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0);
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail),
+			       asd_ha->hw_prof.max_ddbs-1);
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0);
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF);
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF);
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0);
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0);
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0);
+	asd_ddbsite_write_word(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh),
+			       asd_ha->hw_prof.num_phys * 2);
+	asd_ddbsite_write_byte(asd_ha, 0,
+		 offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0);
+	asd_ddbsite_write_byte(asd_ha, 0,
+	       offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF);
+	asd_ddbsite_write_byte(asd_ha, 0,
+	       offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00);
+	/* DDB 0 is reserved */
+	set_bit(0, asd_ha->hw_prof.ddb_bitmap);
+}
+
+/**
+ * asd_seq_setup_seqs -- setup and initialize central and link sequencers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha)
+{
+	int 		lseq;
+	u8		lseq_mask;
+
+	/* Initialize SCB sites. Done first to compute some values which
+	 * the rest of the init code depends on. */
+	asd_init_scb_sites(asd_ha);
+
+	/* Initialize CSEQ Scratch RAM registers. */
+	asd_init_cseq_scratch(asd_ha);
+
+	/* Initialize LmSEQ Scratch RAM registers. */
+	asd_init_lseq_scratch(asd_ha);
+
+	/* Initialize CSEQ CIO registers. */
+	asd_init_cseq_cio(asd_ha);
+
+	asd_init_ddb_0(asd_ha);
+
+	/* Initialize LmSEQ CIO registers. */
+	lseq_mask = asd_ha->hw_prof.enabled_phys;
+	for_each_sequencer(lseq_mask, lseq_mask, lseq)
+		asd_init_lseq_cio(asd_ha, lseq);
+	asd_post_init_cseq(asd_ha);
+}
+
+
+/**
+ * asd_seq_start_cseq -- start the central sequencer, CSEQ
+ * @asd_ha: pointer to host adapter structure
+ */
+static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha)
+{
+	/* Reset the ARP2 instruction to location zero. */
+	asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
+
+	/* Unpause the CSEQ  */
+	return asd_unpause_cseq(asd_ha);
+}
+
+/**
+ * asd_seq_start_lseq -- start a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @lseq: the link sequencer of interest
+ */
+static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+	/* Reset the ARP2 instruction to location zero. */
+	asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
+
+	/* Unpause the LmSEQ  */
+	return asd_seq_unpause_lseq(asd_ha, lseq);
+}
+
+static int asd_request_firmware(struct asd_ha_struct *asd_ha)
+{
+	int err, i;
+	struct sequencer_file_header header, *hdr_ptr;
+	u32 csum = 0;
+	u16 *ptr_cseq_vecs, *ptr_lseq_vecs;
+
+	if (sequencer_fw)
+		/* already loaded */
+		return 0;
+
+	err = request_firmware(&sequencer_fw,
+			       SAS_RAZOR_SEQUENCER_FW_FILE,
+			       &asd_ha->pcidev->dev);
+	if (err)
+		return err;
+
+	hdr_ptr = (struct sequencer_file_header *)sequencer_fw->data;
+
+	header.csum = le32_to_cpu(hdr_ptr->csum);
+	header.major = le32_to_cpu(hdr_ptr->major);
+	header.minor = le32_to_cpu(hdr_ptr->minor);
+	sequencer_version = hdr_ptr->version;
+	header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset);
+	header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size);
+	header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset);
+	header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size);
+	header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset);
+	header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size);
+	header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset);
+	header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size);
+	header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task);
+	header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop);
+	header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop);
+
+	for (i = sizeof(header.csum); i < sequencer_fw->size; i++)
+		csum += sequencer_fw->data[i];
+
+	if (csum != header.csum) {
+		asd_printk("Firmware file checksum mismatch\n");
+		return -EINVAL;
+	}
+
+	if (header.cseq_table_size != CSEQ_NUM_VECS ||
+	    header.lseq_table_size != LSEQ_NUM_VECS) {
+		asd_printk("Firmware file table size mismatch\n");
+		return -EINVAL;
+	}
+
+	ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset];
+	ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset];
+	mode2_task = header.mode2_task;
+	cseq_idle_loop = header.cseq_idle_loop;
+	lseq_idle_loop = header.lseq_idle_loop;
+
+	for (i = 0; i < CSEQ_NUM_VECS; i++)
+		cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]);
+
+	for (i = 0; i < LSEQ_NUM_VECS; i++)
+		lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]);
+
+	cseq_code = &sequencer_fw->data[header.cseq_code_offset];
+	cseq_code_size = header.cseq_code_size;
+	lseq_code = &sequencer_fw->data[header.lseq_code_offset];
+	lseq_code_size = header.lseq_code_size;
+
+	return 0;
+}
+
+int asd_init_seqs(struct asd_ha_struct *asd_ha)
+{
+	int err;
+
+	err = asd_request_firmware(asd_ha);
+
+	if (err) {
+		asd_printk("Failed to load sequencer firmware file %s, error %d\n",
+			   SAS_RAZOR_SEQUENCER_FW_FILE, err);
+		return err;
+	}
+
+	asd_printk("using sequencer %s\n", sequencer_version);
+	err = asd_seq_download_seqs(asd_ha);
+	if (err) {
+		asd_printk("couldn't download sequencers for %s\n",
+			   pci_name(asd_ha->pcidev));
+		return err;
+	}
+
+	asd_seq_setup_seqs(asd_ha);
+
+	return 0;
+}
+
+int asd_start_seqs(struct asd_ha_struct *asd_ha)
+{
+	int err;
+	u8  lseq_mask;
+	int lseq;
+
+	err = asd_seq_start_cseq(asd_ha);
+	if (err) {
+		asd_printk("couldn't start CSEQ for %s\n",
+			   pci_name(asd_ha->pcidev));
+		return err;
+	}
+
+	lseq_mask = asd_ha->hw_prof.enabled_phys;
+	for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+		err = asd_seq_start_lseq(asd_ha, lseq);
+		if (err) {
+			asd_printk("coudln't start LSEQ %d for %s\n", lseq,
+				   pci_name(asd_ha->pcidev));
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * asd_update_port_links -- update port_map_by_links and phy_is_up
+ * @sas_phy: pointer to the phy which has been added to a port
+ *
+ * 1) When a link reset has completed and we got BYTES DMAED with a
+ * valid frame we call this function for that phy, to indicate that
+ * the phy is up, i.e. we update the phy_is_up in DDB 0.  The
+ * sequencer checks phy_is_up when pending SCBs are to be sent, and
+ * when an open address frame has been received.
+ *
+ * 2) When we know of ports, we call this function to update the map
+ * of phys participaing in that port, i.e. we update the
+ * port_map_by_links in DDB 0.  When a HARD_RESET primitive has been
+ * received, the sequencer disables all phys in that port.
+ * port_map_by_links is also used as the conn_mask byte in the
+ * initiator/target port DDB.
+ */
+void asd_update_port_links(struct asd_sas_phy *sas_phy)
+{
+	struct asd_ha_struct *asd_ha = sas_phy->ha->lldd_ha;
+	const u8 phy_mask = (u8) sas_phy->port->phy_mask;
+	u8  phy_is_up;
+	u8  mask;
+	int i, err;
+
+	for_each_phy(phy_mask, mask, i)
+		asd_ddbsite_write_byte(asd_ha, 0,
+				       offsetof(struct asd_ddb_seq_shared,
+						port_map_by_links)+i,phy_mask);
+
+	for (i = 0; i < 12; i++) {
+		phy_is_up = asd_ddbsite_read_byte(asd_ha, 0,
+			  offsetof(struct asd_ddb_seq_shared, phy_is_up));
+		err = asd_ddbsite_update_byte(asd_ha, 0,
+				offsetof(struct asd_ddb_seq_shared, phy_is_up),
+				phy_is_up,
+				phy_is_up | phy_mask);
+		if (!err)
+			break;
+		else if (err == -EFAULT) {
+			asd_printk("phy_is_up: parity error in DDB 0\n");
+			break;
+		}
+	}
+
+	if (err)
+		asd_printk("couldn't update DDB 0:error:%d\n", err);
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.h b/drivers/scsi/aic94xx/aic94xx_seq.h
new file mode 100644
index 000000000000..42281c36153b
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_seq.h
@@ -0,0 +1,70 @@
+/*
+ * Aic94xx SAS/SATA driver sequencer interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef _AIC94XX_SEQ_H_
+#define _AIC94XX_SEQ_H_
+
+#define CSEQ_NUM_VECS	3
+#define LSEQ_NUM_VECS	11
+
+#define SAS_RAZOR_SEQUENCER_FW_FILE "aic94xx-seq.fw"
+
+/* Note:  All quantites in the sequencer file are little endian */
+struct sequencer_file_header {
+	/* Checksum of the entire contents of the sequencer excluding
+	 * these four bytes */
+	u32	csum;
+	/* numeric major version */
+	u32	major;
+	/* numeric minor version */
+	u32	minor;
+	/* version string printed by driver */
+	char	version[16];
+	u32	cseq_table_offset;
+	u32	cseq_table_size;
+	u32	lseq_table_offset;
+	u32	lseq_table_size;
+	u32	cseq_code_offset;
+	u32	cseq_code_size;
+	u32	lseq_code_offset;
+	u32	lseq_code_size;
+	u16	mode2_task;
+	u16	cseq_idle_loop;
+	u16	lseq_idle_loop;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+int asd_pause_cseq(struct asd_ha_struct *asd_ha);
+int asd_unpause_cseq(struct asd_ha_struct *asd_ha);
+int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+int asd_init_seqs(struct asd_ha_struct *asd_ha);
+int asd_start_seqs(struct asd_ha_struct *asd_ha);
+
+void asd_update_port_links(struct asd_sas_phy *phy);
+#endif
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
new file mode 100644
index 000000000000..285e70dae933
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -0,0 +1,642 @@
+/*
+ * Aic94xx SAS/SATA Tasks
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/spinlock.h>
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+#include "aic94xx_hwi.h"
+
+static void asd_unbuild_ata_ascb(struct asd_ascb *a);
+static void asd_unbuild_smp_ascb(struct asd_ascb *a);
+static void asd_unbuild_ssp_ascb(struct asd_ascb *a);
+
+static inline void asd_can_dequeue(struct asd_ha_struct *asd_ha, int num)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+	asd_ha->seq.can_queue += num;
+	spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+}
+
+/* PCI_DMA_... to our direction translation.
+ */
+static const u8 data_dir_flags[] = {
+	[PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,	/* UNSPECIFIED */
+	[PCI_DMA_TODEVICE]      = DATA_DIR_OUT, /* OUTBOUND */
+	[PCI_DMA_FROMDEVICE]    = DATA_DIR_IN, /* INBOUND */
+	[PCI_DMA_NONE]          = DATA_DIR_NONE, /* NO TRANSFER */
+};
+
+static inline int asd_map_scatterlist(struct sas_task *task,
+				      struct sg_el *sg_arr,
+				      unsigned long gfp_flags)
+{
+	struct asd_ascb *ascb = task->lldd_task;
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct scatterlist *sc;
+	int num_sg, res;
+
+	if (task->data_dir == PCI_DMA_NONE)
+		return 0;
+
+	if (task->num_scatter == 0) {
+		void *p = task->scatter;
+		dma_addr_t dma = pci_map_single(asd_ha->pcidev, p,
+						task->total_xfer_len,
+						task->data_dir);
+		sg_arr[0].bus_addr = cpu_to_le64((u64)dma);
+		sg_arr[0].size = cpu_to_le32(task->total_xfer_len);
+		sg_arr[0].flags |= ASD_SG_EL_LIST_EOL;
+		return 0;
+	}
+
+	num_sg = pci_map_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+			    task->data_dir);
+	if (num_sg == 0)
+		return -ENOMEM;
+
+	if (num_sg > 3) {
+		int i;
+
+		ascb->sg_arr = asd_alloc_coherent(asd_ha,
+						  num_sg*sizeof(struct sg_el),
+						  gfp_flags);
+		if (!ascb->sg_arr) {
+			res = -ENOMEM;
+			goto err_unmap;
+		}
+		for (sc = task->scatter, i = 0; i < num_sg; i++, sc++) {
+			struct sg_el *sg =
+				&((struct sg_el *)ascb->sg_arr->vaddr)[i];
+			sg->bus_addr = cpu_to_le64((u64)sg_dma_address(sc));
+			sg->size = cpu_to_le32((u32)sg_dma_len(sc));
+			if (i == num_sg-1)
+				sg->flags |= ASD_SG_EL_LIST_EOL;
+		}
+
+		for (sc = task->scatter, i = 0; i < 2; i++, sc++) {
+			sg_arr[i].bus_addr =
+				cpu_to_le64((u64)sg_dma_address(sc));
+			sg_arr[i].size = cpu_to_le32((u32)sg_dma_len(sc));
+		}
+		sg_arr[1].next_sg_offs = 2 * sizeof(*sg_arr);
+		sg_arr[1].flags |= ASD_SG_EL_LIST_EOS;
+
+		memset(&sg_arr[2], 0, sizeof(*sg_arr));
+		sg_arr[2].bus_addr=cpu_to_le64((u64)ascb->sg_arr->dma_handle);
+	} else {
+		int i;
+		for (sc = task->scatter, i = 0; i < num_sg; i++, sc++) {
+			sg_arr[i].bus_addr =
+				cpu_to_le64((u64)sg_dma_address(sc));
+			sg_arr[i].size = cpu_to_le32((u32)sg_dma_len(sc));
+		}
+		sg_arr[i-1].flags |= ASD_SG_EL_LIST_EOL;
+	}
+
+	return 0;
+err_unmap:
+	pci_unmap_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+		     task->data_dir);
+	return res;
+}
+
+static inline void asd_unmap_scatterlist(struct asd_ascb *ascb)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct sas_task *task = ascb->uldd_task;
+
+	if (task->data_dir == PCI_DMA_NONE)
+		return;
+
+	if (task->num_scatter == 0) {
+		dma_addr_t dma = (dma_addr_t)
+		       le64_to_cpu(ascb->scb->ssp_task.sg_element[0].bus_addr);
+		pci_unmap_single(ascb->ha->pcidev, dma, task->total_xfer_len,
+				 task->data_dir);
+		return;
+	}
+
+	asd_free_coherent(asd_ha, ascb->sg_arr);
+	pci_unmap_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+		     task->data_dir);
+}
+
+/* ---------- Task complete tasklet ---------- */
+
+static void asd_get_response_tasklet(struct asd_ascb *ascb,
+				     struct done_list_struct *dl)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct sas_task *task = ascb->uldd_task;
+	struct task_status_struct *ts = &task->task_status;
+	unsigned long flags;
+	struct tc_resp_sb_struct {
+		__le16 index_escb;
+		u8     len_lsb;
+		u8     flags;
+	} __attribute__ ((packed)) *resp_sb = (void *) dl->status_block;
+
+/* 	int  size   = ((resp_sb->flags & 7) << 8) | resp_sb->len_lsb; */
+	int  edb_id = ((resp_sb->flags & 0x70) >> 4)-1;
+	struct asd_ascb *escb;
+	struct asd_dma_tok *edb;
+	void *r;
+
+	spin_lock_irqsave(&asd_ha->seq.tc_index_lock, flags);
+	escb = asd_tc_index_find(&asd_ha->seq,
+				 (int)le16_to_cpu(resp_sb->index_escb));
+	spin_unlock_irqrestore(&asd_ha->seq.tc_index_lock, flags);
+
+	if (!escb) {
+		ASD_DPRINTK("Uh-oh! No escb for this dl?!\n");
+		return;
+	}
+
+	ts->buf_valid_size = 0;
+	edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index];
+	r = edb->vaddr;
+	if (task->task_proto == SAS_PROTO_SSP) {
+		struct ssp_response_iu *iu =
+			r + 16 + sizeof(struct ssp_frame_hdr);
+
+		ts->residual = le32_to_cpu(*(__le32 *)r);
+		ts->resp = SAS_TASK_COMPLETE;
+		if (iu->datapres == 0)
+			ts->stat = iu->status;
+		else if (iu->datapres == 1)
+			ts->stat = iu->resp_data[3];
+		else if (iu->datapres == 2) {
+			ts->stat = SAM_CHECK_COND;
+			ts->buf_valid_size = min((u32) SAS_STATUS_BUF_SIZE,
+					 be32_to_cpu(iu->sense_data_len));
+			memcpy(ts->buf, iu->sense_data, ts->buf_valid_size);
+			if (iu->status != SAM_CHECK_COND) {
+				ASD_DPRINTK("device %llx sent sense data, but "
+					    "stat(0x%x) is not CHECK_CONDITION"
+					    "\n",
+					    SAS_ADDR(task->dev->sas_addr),
+					    ts->stat);
+			}
+		}
+	}  else {
+		struct ata_task_resp *resp = (void *) &ts->buf[0];
+
+		ts->residual = le32_to_cpu(*(__le32 *)r);
+
+		if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+			resp->frame_len = le16_to_cpu(*(__le16 *)(r+6));
+			memcpy(&resp->ending_fis[0], r+16, 24);
+			ts->buf_valid_size = sizeof(*resp);
+		}
+	}
+
+	asd_invalidate_edb(escb, edb_id);
+}
+
+static void asd_task_tasklet_complete(struct asd_ascb *ascb,
+				      struct done_list_struct *dl)
+{
+	struct sas_task *task = ascb->uldd_task;
+	struct task_status_struct *ts = &task->task_status;
+	unsigned long flags;
+	u8 opcode = dl->opcode;
+
+	asd_can_dequeue(ascb->ha, 1);
+
+Again:
+	switch (opcode) {
+	case TC_NO_ERROR:
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_GOOD;
+		break;
+	case TC_UNDERRUN:
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		ts->residual = le32_to_cpu(*(__le32 *)dl->status_block);
+		break;
+	case TC_OVERRUN:
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		ts->residual = 0;
+		break;
+	case TC_SSP_RESP:
+	case TC_ATA_RESP:
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_PROTO_RESPONSE;
+		asd_get_response_tasklet(ascb, dl);
+		break;
+	case TF_OPEN_REJECT:
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_OPEN_REJECT;
+		if (dl->status_block[1] & 2)
+			ts->open_rej_reason = 1 + dl->status_block[2];
+		else if (dl->status_block[1] & 1)
+			ts->open_rej_reason = (dl->status_block[2] >> 4)+10;
+		else
+			ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case TF_OPEN_TO:
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case TF_PHY_DOWN:
+	case TU_PHY_DOWN:
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_PHY_DOWN;
+		break;
+	case TI_PHY_DOWN:
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_PHY_DOWN;
+		break;
+	case TI_BREAK:
+	case TI_PROTO_ERR:
+	case TI_NAK:
+	case TI_ACK_NAK_TO:
+	case TF_SMP_XMIT_RCV_ERR:
+	case TC_ATA_R_ERR_RECV:
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_INTERRUPTED;
+		break;
+	case TF_BREAK:
+	case TU_BREAK:
+	case TU_ACK_NAK_TO:
+	case TF_SMPRSP_TO:
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case TF_NAK_RECV:
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case TA_I_T_NEXUS_LOSS:
+		opcode = dl->status_block[0];
+		goto Again;
+		break;
+	case TF_INV_CONN_HANDLE:
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_DEVICE_UNKNOWN;
+		break;
+	case TF_REQUESTED_N_PENDING:
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_PENDING;
+		break;
+	case TC_TASK_CLEARED:
+	case TA_ON_REQ:
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		break;
+
+	case TF_NO_SMP_CONN:
+	case TF_TMF_NO_CTX:
+	case TF_TMF_NO_TAG:
+	case TF_TMF_TAG_FREE:
+	case TF_TMF_TASK_DONE:
+	case TF_TMF_NO_CONN_HANDLE:
+	case TF_IRTT_TO:
+	case TF_IU_SHORT:
+	case TF_DATA_OFFS_ERR:
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+
+	case TC_LINK_ADM_RESP:
+	case TC_CONTROL_PHY:
+	case TC_RESUME:
+	case TC_PARTIAL_SG_LIST:
+	default:
+		ASD_DPRINTK("%s: dl opcode: 0x%x?\n", __FUNCTION__, opcode);
+		break;
+	}
+
+	switch (task->task_proto) {
+	case SATA_PROTO:
+	case SAS_PROTO_STP:
+		asd_unbuild_ata_ascb(ascb);
+		break;
+	case SAS_PROTO_SMP:
+		asd_unbuild_smp_ascb(ascb);
+		break;
+	case SAS_PROTO_SSP:
+		asd_unbuild_ssp_ascb(ascb);
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	task->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((task->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		ASD_DPRINTK("task 0x%p done with opcode 0x%x resp 0x%x "
+			    "stat 0x%x but aborted by upper layer!\n",
+			    task, opcode, ts->resp, ts->stat);
+		complete(&ascb->completion);
+	} else {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		task->lldd_task = NULL;
+		asd_ascb_free(ascb);
+		mb();
+		task->task_done(task);
+	}
+}
+
+/* ---------- ATA ---------- */
+
+static int asd_build_ata_ascb(struct asd_ascb *ascb, struct sas_task *task,
+			      unsigned long gfp_flags)
+{
+	struct domain_device *dev = task->dev;
+	struct scb *scb;
+	u8     flags;
+	int    res = 0;
+
+	scb = ascb->scb;
+
+	if (unlikely(task->ata_task.device_control_reg_update))
+		scb->header.opcode = CONTROL_ATA_DEV;
+	else if (dev->sata_dev.command_set == ATA_COMMAND_SET)
+		scb->header.opcode = INITIATE_ATA_TASK;
+	else
+		scb->header.opcode = INITIATE_ATAPI_TASK;
+
+	scb->ata_task.proto_conn_rate = (1 << 5); /* STP */
+	if (dev->port->oob_mode == SAS_OOB_MODE)
+		scb->ata_task.proto_conn_rate |= dev->linkrate;
+
+	scb->ata_task.total_xfer_len = cpu_to_le32(task->total_xfer_len);
+	scb->ata_task.fis = task->ata_task.fis;
+	scb->ata_task.fis.fis_type = 0x27;
+	if (likely(!task->ata_task.device_control_reg_update))
+		scb->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+	scb->ata_task.fis.flags &= 0xF0; /* PM_PORT field shall be 0 */
+	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+		memcpy(scb->ata_task.atapi_packet, task->ata_task.atapi_packet,
+		       16);
+	scb->ata_task.sister_scb = cpu_to_le16(0xFFFF);
+	scb->ata_task.conn_handle = cpu_to_le16(
+		(u16)(unsigned long)dev->lldd_dev);
+
+	if (likely(!task->ata_task.device_control_reg_update)) {
+		flags = 0;
+		if (task->ata_task.dma_xfer)
+			flags |= DATA_XFER_MODE_DMA;
+		if (task->ata_task.use_ncq &&
+		    dev->sata_dev.command_set != ATAPI_COMMAND_SET)
+			flags |= ATA_Q_TYPE_NCQ;
+		flags |= data_dir_flags[task->data_dir];
+		scb->ata_task.ata_flags = flags;
+
+		scb->ata_task.retry_count = task->ata_task.retry_count;
+
+		flags = 0;
+		if (task->ata_task.set_affil_pol)
+			flags |= SET_AFFIL_POLICY;
+		if (task->ata_task.stp_affil_pol)
+			flags |= STP_AFFIL_POLICY;
+		scb->ata_task.flags = flags;
+	}
+	ascb->tasklet_complete = asd_task_tasklet_complete;
+
+	if (likely(!task->ata_task.device_control_reg_update))
+		res = asd_map_scatterlist(task, scb->ata_task.sg_element,
+					  gfp_flags);
+
+	return res;
+}
+
+static void asd_unbuild_ata_ascb(struct asd_ascb *a)
+{
+	asd_unmap_scatterlist(a);
+}
+
+/* ---------- SMP ---------- */
+
+static int asd_build_smp_ascb(struct asd_ascb *ascb, struct sas_task *task,
+			      unsigned long gfp_flags)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct domain_device *dev = task->dev;
+	struct scb *scb;
+
+	pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_req, 1,
+		   PCI_DMA_FROMDEVICE);
+	pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_resp, 1,
+		   PCI_DMA_FROMDEVICE);
+
+	scb = ascb->scb;
+
+	scb->header.opcode = INITIATE_SMP_TASK;
+
+	scb->smp_task.proto_conn_rate = dev->linkrate;
+
+	scb->smp_task.smp_req.bus_addr =
+		cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+	scb->smp_task.smp_req.size =
+		cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+
+	scb->smp_task.smp_resp.bus_addr =
+		cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp));
+	scb->smp_task.smp_resp.size =
+		cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+
+	scb->smp_task.sister_scb = cpu_to_le16(0xFFFF);
+	scb->smp_task.conn_handle = cpu_to_le16((u16)
+						(unsigned long)dev->lldd_dev);
+
+	ascb->tasklet_complete = asd_task_tasklet_complete;
+
+	return 0;
+}
+
+static void asd_unbuild_smp_ascb(struct asd_ascb *a)
+{
+	struct sas_task *task = a->uldd_task;
+
+	BUG_ON(!task);
+	pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_req, 1,
+		     PCI_DMA_FROMDEVICE);
+	pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_resp, 1,
+		     PCI_DMA_FROMDEVICE);
+}
+
+/* ---------- SSP ---------- */
+
+static int asd_build_ssp_ascb(struct asd_ascb *ascb, struct sas_task *task,
+			      unsigned long gfp_flags)
+{
+	struct domain_device *dev = task->dev;
+	struct scb *scb;
+	int    res = 0;
+
+	scb = ascb->scb;
+
+	scb->header.opcode = INITIATE_SSP_TASK;
+
+	scb->ssp_task.proto_conn_rate  = (1 << 4); /* SSP */
+	scb->ssp_task.proto_conn_rate |= dev->linkrate;
+	scb->ssp_task.total_xfer_len = cpu_to_le32(task->total_xfer_len);
+	scb->ssp_task.ssp_frame.frame_type = SSP_DATA;
+	memcpy(scb->ssp_task.ssp_frame.hashed_dest_addr, dev->hashed_sas_addr,
+	       HASHED_SAS_ADDR_SIZE);
+	memcpy(scb->ssp_task.ssp_frame.hashed_src_addr,
+	       dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+	scb->ssp_task.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+
+	memcpy(scb->ssp_task.ssp_cmd.lun, task->ssp_task.LUN, 8);
+	if (task->ssp_task.enable_first_burst)
+		scb->ssp_task.ssp_cmd.efb_prio_attr |= EFB_MASK;
+	scb->ssp_task.ssp_cmd.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+	scb->ssp_task.ssp_cmd.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+	memcpy(scb->ssp_task.ssp_cmd.cdb, task->ssp_task.cdb, 16);
+
+	scb->ssp_task.sister_scb = cpu_to_le16(0xFFFF);
+	scb->ssp_task.conn_handle = cpu_to_le16(
+		(u16)(unsigned long)dev->lldd_dev);
+	scb->ssp_task.data_dir = data_dir_flags[task->data_dir];
+	scb->ssp_task.retry_count = scb->ssp_task.retry_count;
+
+	ascb->tasklet_complete = asd_task_tasklet_complete;
+
+	res = asd_map_scatterlist(task, scb->ssp_task.sg_element, gfp_flags);
+
+	return res;
+}
+
+static void asd_unbuild_ssp_ascb(struct asd_ascb *a)
+{
+	asd_unmap_scatterlist(a);
+}
+
+/* ---------- Execute Task ---------- */
+
+static inline int asd_can_queue(struct asd_ha_struct *asd_ha, int num)
+{
+	int res = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+	if ((asd_ha->seq.can_queue - num) < 0)
+		res = -SAS_QUEUE_FULL;
+	else
+		asd_ha->seq.can_queue -= num;
+	spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+	return res;
+}
+
+int asd_execute_task(struct sas_task *task, const int num,
+		     unsigned long gfp_flags)
+{
+	int res = 0;
+	LIST_HEAD(alist);
+	struct sas_task *t = task;
+	struct asd_ascb *ascb = NULL, *a;
+	struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+
+	res = asd_can_queue(asd_ha, num);
+	if (res)
+		return res;
+
+	res = num;
+	ascb = asd_ascb_alloc_list(asd_ha, &res, gfp_flags);
+	if (res) {
+		res = -ENOMEM;
+		goto out_err;
+	}
+
+	__list_add(&alist, ascb->list.prev, &ascb->list);
+	list_for_each_entry(a, &alist, list) {
+		a->uldd_task = t;
+		t->lldd_task = a;
+		t = list_entry(t->list.next, struct sas_task, list);
+	}
+	list_for_each_entry(a, &alist, list) {
+		t = a->uldd_task;
+		a->uldd_timer = 1;
+		if (t->task_proto & SAS_PROTO_STP)
+			t->task_proto = SAS_PROTO_STP;
+		switch (t->task_proto) {
+		case SATA_PROTO:
+		case SAS_PROTO_STP:
+			res = asd_build_ata_ascb(a, t, gfp_flags);
+			break;
+		case SAS_PROTO_SMP:
+			res = asd_build_smp_ascb(a, t, gfp_flags);
+			break;
+		case SAS_PROTO_SSP:
+			res = asd_build_ssp_ascb(a, t, gfp_flags);
+			break;
+		default:
+			asd_printk("unknown sas_task proto: 0x%x\n",
+				   t->task_proto);
+			res = -ENOMEM;
+			break;
+		}
+		if (res)
+			goto out_err_unmap;
+	}
+	list_del_init(&alist);
+
+	res = asd_post_ascb_list(asd_ha, ascb, num);
+	if (unlikely(res)) {
+		a = NULL;
+		__list_add(&alist, ascb->list.prev, &ascb->list);
+		goto out_err_unmap;
+	}
+
+	return 0;
+out_err_unmap:
+	{
+		struct asd_ascb *b = a;
+		list_for_each_entry(a, &alist, list) {
+			if (a == b)
+				break;
+			t = a->uldd_task;
+			switch (t->task_proto) {
+			case SATA_PROTO:
+			case SAS_PROTO_STP:
+				asd_unbuild_ata_ascb(a);
+				break;
+			case SAS_PROTO_SMP:
+				asd_unbuild_smp_ascb(a);
+				break;
+			case SAS_PROTO_SSP:
+				asd_unbuild_ssp_ascb(a);
+			default:
+				break;
+			}
+			t->lldd_task = NULL;
+		}
+	}
+	list_del_init(&alist);
+out_err:
+	if (ascb)
+		asd_ascb_free_list(ascb);
+	asd_can_dequeue(asd_ha, num);
+	return res;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
new file mode 100644
index 000000000000..61234384503b
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -0,0 +1,636 @@
+/*
+ * Aic94xx Task Management Functions
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/spinlock.h>
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+#include "aic94xx_hwi.h"
+
+/* ---------- Internal enqueue ---------- */
+
+static int asd_enqueue_internal(struct asd_ascb *ascb,
+		void (*tasklet_complete)(struct asd_ascb *,
+					 struct done_list_struct *),
+				void (*timed_out)(unsigned long))
+{
+	int res;
+
+	ascb->tasklet_complete = tasklet_complete;
+	ascb->uldd_timer = 1;
+
+	ascb->timer.data = (unsigned long) ascb;
+	ascb->timer.function = timed_out;
+	ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT;
+
+	add_timer(&ascb->timer);
+
+	res = asd_post_ascb_list(ascb->ha, ascb, 1);
+	if (unlikely(res))
+		del_timer(&ascb->timer);
+	return res;
+}
+
+static inline void asd_timedout_common(unsigned long data)
+{
+	struct asd_ascb *ascb = (void *) data;
+	struct asd_seq_data *seq = &ascb->ha->seq;
+        unsigned long flags;
+
+	spin_lock_irqsave(&seq->pend_q_lock, flags);
+        seq->pending--;
+        list_del_init(&ascb->list);
+        spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+}
+
+/* ---------- CLEAR NEXUS ---------- */
+
+static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb,
+					     struct done_list_struct *dl)
+{
+	ASD_DPRINTK("%s: here\n", __FUNCTION__);
+	if (!del_timer(&ascb->timer)) {
+		ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__);
+		return;
+	}
+	ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode);
+	ascb->uldd_task = (void *) (unsigned long) dl->opcode;
+	complete(&ascb->completion);
+}
+
+static void asd_clear_nexus_timedout(unsigned long data)
+{
+	struct asd_ascb *ascb = (void *) data;
+
+	ASD_DPRINTK("%s: here\n", __FUNCTION__);
+	asd_timedout_common(data);
+	ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
+	complete(&ascb->completion);
+}
+
+#define CLEAR_NEXUS_PRE         \
+	ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \
+        res = 1;                \
+	ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \
+	if (!ascb)              \
+		return -ENOMEM; \
+                                \
+	scb = ascb->scb;        \
+	scb->header.opcode = CLEAR_NEXUS
+
+#define CLEAR_NEXUS_POST        \
+	ASD_DPRINTK("%s: POST\n", __FUNCTION__); \
+	res = asd_enqueue_internal(ascb, asd_clear_nexus_tasklet_complete, \
+				   asd_clear_nexus_timedout);              \
+	if (res)                \
+		goto out_err;   \
+	ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \
+	wait_for_completion(&ascb->completion); \
+	res = (int) (unsigned long) ascb->uldd_task; \
+	if (res == TC_NO_ERROR) \
+		res = TMF_RESP_FUNC_COMPLETE;   \
+out_err:                        \
+	asd_ascb_free(ascb);    \
+	return res
+
+int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha)
+{
+	struct asd_ha_struct *asd_ha = sas_ha->lldd_ha;
+	struct asd_ascb *ascb;
+	struct scb *scb;
+	int res;
+
+	CLEAR_NEXUS_PRE;
+	scb->clear_nexus.nexus = NEXUS_ADAPTER;
+	CLEAR_NEXUS_POST;
+}
+
+int asd_clear_nexus_port(struct asd_sas_port *port)
+{
+	struct asd_ha_struct *asd_ha = port->ha->lldd_ha;
+	struct asd_ascb *ascb;
+	struct scb *scb;
+	int res;
+
+	CLEAR_NEXUS_PRE;
+	scb->clear_nexus.nexus = NEXUS_PORT;
+	scb->clear_nexus.conn_mask = port->phy_mask;
+	CLEAR_NEXUS_POST;
+}
+
+#if 0
+static int asd_clear_nexus_I_T(struct domain_device *dev)
+{
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	struct asd_ascb *ascb;
+	struct scb *scb;
+	int res;
+
+	CLEAR_NEXUS_PRE;
+	scb->clear_nexus.nexus = NEXUS_I_T;
+	scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ;
+	if (dev->tproto)
+		scb->clear_nexus.flags |= SUSPEND_TX;
+	scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+						   dev->lldd_dev);
+	CLEAR_NEXUS_POST;
+}
+#endif
+
+static int asd_clear_nexus_I_T_L(struct domain_device *dev, u8 *lun)
+{
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	struct asd_ascb *ascb;
+	struct scb *scb;
+	int res;
+
+	CLEAR_NEXUS_PRE;
+	scb->clear_nexus.nexus = NEXUS_I_T_L;
+	scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ;
+	if (dev->tproto)
+		scb->clear_nexus.flags |= SUSPEND_TX;
+	memcpy(scb->clear_nexus.ssp_task.lun, lun, 8);
+	scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+						   dev->lldd_dev);
+	CLEAR_NEXUS_POST;
+}
+
+static int asd_clear_nexus_tag(struct sas_task *task)
+{
+	struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+	struct asd_ascb *tascb = task->lldd_task;
+	struct asd_ascb *ascb;
+	struct scb *scb;
+	int res;
+
+	CLEAR_NEXUS_PRE;
+	scb->clear_nexus.nexus = NEXUS_TAG;
+	memcpy(scb->clear_nexus.ssp_task.lun, task->ssp_task.LUN, 8);
+	scb->clear_nexus.ssp_task.tag = tascb->tag;
+	if (task->dev->tproto)
+		scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+							  task->dev->lldd_dev);
+	CLEAR_NEXUS_POST;
+}
+
+static int asd_clear_nexus_index(struct sas_task *task)
+{
+	struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+	struct asd_ascb *tascb = task->lldd_task;
+	struct asd_ascb *ascb;
+	struct scb *scb;
+	int res;
+
+	CLEAR_NEXUS_PRE;
+	scb->clear_nexus.nexus = NEXUS_TRANS_CX;
+	if (task->dev->tproto)
+		scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+							  task->dev->lldd_dev);
+	scb->clear_nexus.index = cpu_to_le16(tascb->tc_index);
+	CLEAR_NEXUS_POST;
+}
+
+/* ---------- TMFs ---------- */
+
+static void asd_tmf_timedout(unsigned long data)
+{
+	struct asd_ascb *ascb = (void *) data;
+
+	ASD_DPRINTK("tmf timed out\n");
+	asd_timedout_common(data);
+	ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
+	complete(&ascb->completion);
+}
+
+static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb,
+				    struct done_list_struct *dl)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	unsigned long flags;
+	struct tc_resp_sb_struct {
+		__le16 index_escb;
+		u8     len_lsb;
+		u8     flags;
+	} __attribute__ ((packed)) *resp_sb = (void *) dl->status_block;
+
+	int  edb_id = ((resp_sb->flags & 0x70) >> 4)-1;
+	struct asd_ascb *escb;
+	struct asd_dma_tok *edb;
+	struct ssp_frame_hdr *fh;
+	struct ssp_response_iu   *ru;
+	int res = TMF_RESP_FUNC_FAILED;
+
+	ASD_DPRINTK("tmf resp tasklet\n");
+
+	spin_lock_irqsave(&asd_ha->seq.tc_index_lock, flags);
+	escb = asd_tc_index_find(&asd_ha->seq,
+				 (int)le16_to_cpu(resp_sb->index_escb));
+	spin_unlock_irqrestore(&asd_ha->seq.tc_index_lock, flags);
+
+	if (!escb) {
+		ASD_DPRINTK("Uh-oh! No escb for this dl?!\n");
+		return res;
+	}
+
+	edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index];
+	ascb->tag = *(__be16 *)(edb->vaddr+4);
+	fh = edb->vaddr + 16;
+	ru = edb->vaddr + 16 + sizeof(*fh);
+	res = ru->status;
+	if (ru->datapres == 1)	  /* Response data present */
+		res = ru->resp_data[3];
+#if 0
+	ascb->tag = fh->tag;
+#endif
+	ascb->tag_valid = 1;
+
+	asd_invalidate_edb(escb, edb_id);
+	return res;
+}
+
+static void asd_tmf_tasklet_complete(struct asd_ascb *ascb,
+				     struct done_list_struct *dl)
+{
+	if (!del_timer(&ascb->timer))
+		return;
+
+	ASD_DPRINTK("tmf tasklet complete\n");
+
+	if (dl->opcode == TC_SSP_RESP)
+		ascb->uldd_task = (void *) (unsigned long)
+			asd_get_tmf_resp_tasklet(ascb, dl);
+	else
+		ascb->uldd_task = (void *) 0xFF00 + (unsigned long) dl->opcode;
+
+	complete(&ascb->completion);
+}
+
+static inline int asd_clear_nexus(struct sas_task *task)
+{
+	int res = TMF_RESP_FUNC_FAILED;
+	struct asd_ascb *tascb = task->lldd_task;
+	unsigned long flags;
+
+	ASD_DPRINTK("task not done, clearing nexus\n");
+	if (tascb->tag_valid)
+		res = asd_clear_nexus_tag(task);
+	else
+		res = asd_clear_nexus_index(task);
+	wait_for_completion_timeout(&tascb->completion,
+				    AIC94XX_SCB_TIMEOUT);
+	ASD_DPRINTK("came back from clear nexus\n");
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE)
+		res = TMF_RESP_FUNC_COMPLETE;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	return res;
+}
+
+/**
+ * asd_abort_task -- ABORT TASK TMF
+ * @task: the task to be aborted
+ *
+ * Before calling ABORT TASK the task state flags should be ORed with
+ * SAS_TASK_STATE_ABORTED (unless SAS_TASK_STATE_DONE is set) under
+ * the task_state_lock IRQ spinlock, then ABORT TASK *must* be called.
+ *
+ * Implements the ABORT TASK TMF, I_T_L_Q nexus.
+ * Returns: SAS TMF responses (see sas_task.h),
+ *          -ENOMEM,
+ *          -SAS_QUEUE_FULL.
+ *
+ * When ABORT TASK returns, the caller of ABORT TASK checks first the
+ * task->task_state_flags, and then the return value of ABORT TASK.
+ *
+ * If the task has task state bit SAS_TASK_STATE_DONE set, then the
+ * task was completed successfully prior to it being aborted.  The
+ * caller of ABORT TASK has responsibility to call task->task_done()
+ * xor free the task, depending on their framework.  The return code
+ * is TMF_RESP_FUNC_FAILED in this case.
+ *
+ * Else the SAS_TASK_STATE_DONE bit is not set,
+ * 	If the return code is TMF_RESP_FUNC_COMPLETE, then
+ * 		the task was aborted successfully.  The caller of
+ * 		ABORT TASK has responsibility to call task->task_done()
+ *              to finish the task, xor free the task depending on their
+ *		framework.
+ *	else
+ * 		the ABORT TASK returned some kind of error. The task
+ *              was _not_ cancelled.  Nothing can be assumed.
+ *		The caller of ABORT TASK may wish to retry.
+ */
+int asd_abort_task(struct sas_task *task)
+{
+	struct asd_ascb *tascb = task->lldd_task;
+	struct asd_ha_struct *asd_ha = tascb->ha;
+	int res = 1;
+	unsigned long flags;
+	struct asd_ascb *ascb = NULL;
+	struct scb *scb;
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		res = TMF_RESP_FUNC_COMPLETE;
+		ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+		goto out_done;
+	}
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+	if (!ascb)
+		return -ENOMEM;
+	scb = ascb->scb;
+
+	scb->header.opcode = ABORT_TASK;
+
+	switch (task->task_proto) {
+	case SATA_PROTO:
+	case SAS_PROTO_STP:
+		scb->abort_task.proto_conn_rate = (1 << 5); /* STP */
+		break;
+	case SAS_PROTO_SSP:
+		scb->abort_task.proto_conn_rate  = (1 << 4); /* SSP */
+		scb->abort_task.proto_conn_rate |= task->dev->linkrate;
+		break;
+	case SAS_PROTO_SMP:
+		break;
+	default:
+		break;
+	}
+
+	if (task->task_proto == SAS_PROTO_SSP) {
+		scb->abort_task.ssp_frame.frame_type = SSP_TASK;
+		memcpy(scb->abort_task.ssp_frame.hashed_dest_addr,
+		       task->dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+		memcpy(scb->abort_task.ssp_frame.hashed_src_addr,
+		       task->dev->port->ha->hashed_sas_addr,
+		       HASHED_SAS_ADDR_SIZE);
+		scb->abort_task.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+
+		memcpy(scb->abort_task.ssp_task.lun, task->ssp_task.LUN, 8);
+		scb->abort_task.ssp_task.tmf = TMF_ABORT_TASK;
+		scb->abort_task.ssp_task.tag = cpu_to_be16(0xFFFF);
+	}
+
+	scb->abort_task.sister_scb = cpu_to_le16(0xFFFF);
+	scb->abort_task.conn_handle = cpu_to_le16(
+		(u16)(unsigned long)task->dev->lldd_dev);
+	scb->abort_task.retry_count = 1;
+	scb->abort_task.index = cpu_to_le16((u16)tascb->tc_index);
+	scb->abort_task.itnl_to = cpu_to_le16(ITNL_TIMEOUT_CONST);
+
+	res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete,
+				   asd_tmf_timedout);
+	if (res)
+		goto out;
+	wait_for_completion(&ascb->completion);
+	ASD_DPRINTK("tmf came back\n");
+
+	res = (int) (unsigned long) ascb->uldd_task;
+	tascb->tag = ascb->tag;
+	tascb->tag_valid = ascb->tag_valid;
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		res = TMF_RESP_FUNC_COMPLETE;
+		ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+		goto out_done;
+	}
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	switch (res) {
+	/* The task to be aborted has been sent to the device.
+	 * We got a Response IU for the ABORT TASK TMF. */
+	case TC_NO_ERROR + 0xFF00:
+	case TMF_RESP_FUNC_COMPLETE:
+	case TMF_RESP_FUNC_FAILED:
+		res = asd_clear_nexus(task);
+		break;
+	case TMF_RESP_INVALID_FRAME:
+	case TMF_RESP_OVERLAPPED_TAG:
+	case TMF_RESP_FUNC_ESUPP:
+	case TMF_RESP_NO_LUN:
+		goto out_done; break;
+	}
+	/* In the following we assume that the managing layer
+	 * will _never_ make a mistake, when issuing ABORT TASK.
+	 */
+	switch (res) {
+	default:
+		res = asd_clear_nexus(task);
+		/* fallthrough */
+	case TC_NO_ERROR + 0xFF00:
+	case TMF_RESP_FUNC_COMPLETE:
+		break;
+	/* The task hasn't been sent to the device xor we never got
+	 * a (sane) Response IU for the ABORT TASK TMF.
+	 */
+	case TF_NAK_RECV + 0xFF00:
+		res = TMF_RESP_INVALID_FRAME;
+		break;
+	case TF_TMF_TASK_DONE + 0xFF00:	/* done but not reported yet */
+		res = TMF_RESP_FUNC_FAILED;
+		wait_for_completion_timeout(&tascb->completion,
+					    AIC94XX_SCB_TIMEOUT);
+		spin_lock_irqsave(&task->task_state_lock, flags);
+		if (task->task_state_flags & SAS_TASK_STATE_DONE)
+			res = TMF_RESP_FUNC_COMPLETE;
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		goto out_done;
+	case TF_TMF_NO_TAG + 0xFF00:
+	case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
+	case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
+		res = TMF_RESP_FUNC_COMPLETE;
+		goto out_done;
+	case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
+		res = TMF_RESP_FUNC_ESUPP;
+		goto out;
+	}
+out_done:
+	if (res == TMF_RESP_FUNC_COMPLETE) {
+		task->lldd_task = NULL;
+		mb();
+		asd_ascb_free(tascb);
+	}
+out:
+	asd_ascb_free(ascb);
+	ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res);
+	return res;
+}
+
+/**
+ * asd_initiate_ssp_tmf -- send a TMF to an I_T_L or I_T_L_Q nexus
+ * @dev: pointer to struct domain_device of interest
+ * @lun: pointer to u8[8] which is the LUN
+ * @tmf: the TMF to be performed (see sas_task.h or the SAS spec)
+ * @index: the transaction context of the task to be queried if QT TMF
+ *
+ * This function is used to send ABORT TASK SET, CLEAR ACA,
+ * CLEAR TASK SET, LU RESET and QUERY TASK TMFs.
+ *
+ * No SCBs should be queued to the I_T_L nexus when this SCB is
+ * pending.
+ *
+ * Returns: TMF response code (see sas_task.h or the SAS spec)
+ */
+static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun,
+				int tmf, int index)
+{
+	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+	struct asd_ascb *ascb;
+	int res = 1;
+	struct scb *scb;
+
+	if (!(dev->tproto & SAS_PROTO_SSP))
+		return TMF_RESP_FUNC_ESUPP;
+
+	ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+	if (!ascb)
+		return -ENOMEM;
+	scb = ascb->scb;
+
+	if (tmf == TMF_QUERY_TASK)
+		scb->header.opcode = QUERY_SSP_TASK;
+	else
+		scb->header.opcode = INITIATE_SSP_TMF;
+
+	scb->ssp_tmf.proto_conn_rate  = (1 << 4); /* SSP */
+	scb->ssp_tmf.proto_conn_rate |= dev->linkrate;
+	/* SSP frame header */
+	scb->ssp_tmf.ssp_frame.frame_type = SSP_TASK;
+	memcpy(scb->ssp_tmf.ssp_frame.hashed_dest_addr,
+	       dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+	memcpy(scb->ssp_tmf.ssp_frame.hashed_src_addr,
+	       dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+	scb->ssp_tmf.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+	/* SSP Task IU */
+	memcpy(scb->ssp_tmf.ssp_task.lun, lun, 8);
+	scb->ssp_tmf.ssp_task.tmf = tmf;
+
+	scb->ssp_tmf.sister_scb = cpu_to_le16(0xFFFF);
+	scb->ssp_tmf.conn_handle= cpu_to_le16((u16)(unsigned long)
+					      dev->lldd_dev);
+	scb->ssp_tmf.retry_count = 1;
+	scb->ssp_tmf.itnl_to = cpu_to_le16(ITNL_TIMEOUT_CONST);
+	if (tmf == TMF_QUERY_TASK)
+		scb->ssp_tmf.index = cpu_to_le16(index);
+
+	res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete,
+				   asd_tmf_timedout);
+	if (res)
+		goto out_err;
+	wait_for_completion(&ascb->completion);
+	res = (int) (unsigned long) ascb->uldd_task;
+
+	switch (res) {
+	case TC_NO_ERROR + 0xFF00:
+		res = TMF_RESP_FUNC_COMPLETE;
+		break;
+	case TF_NAK_RECV + 0xFF00:
+		res = TMF_RESP_INVALID_FRAME;
+		break;
+	case TF_TMF_TASK_DONE + 0xFF00:
+		res = TMF_RESP_FUNC_FAILED;
+		break;
+	case TF_TMF_NO_TAG + 0xFF00:
+	case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
+	case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
+		res = TMF_RESP_FUNC_COMPLETE;
+		break;
+	case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
+		res = TMF_RESP_FUNC_ESUPP;
+		break;
+	default:
+		ASD_DPRINTK("%s: converting result 0x%x to TMF_RESP_FUNC_FAILED\n",
+			    __FUNCTION__, res);
+		res = TMF_RESP_FUNC_FAILED;
+		break;
+	}
+out_err:
+	asd_ascb_free(ascb);
+	return res;
+}
+
+int asd_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+	int res = asd_initiate_ssp_tmf(dev, lun, TMF_ABORT_TASK_SET, 0);
+
+	if (res == TMF_RESP_FUNC_COMPLETE)
+		asd_clear_nexus_I_T_L(dev, lun);
+	return res;
+}
+
+int asd_clear_aca(struct domain_device *dev, u8 *lun)
+{
+	int res = asd_initiate_ssp_tmf(dev, lun, TMF_CLEAR_ACA, 0);
+
+	if (res == TMF_RESP_FUNC_COMPLETE)
+		asd_clear_nexus_I_T_L(dev, lun);
+	return res;
+}
+
+int asd_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+	int res = asd_initiate_ssp_tmf(dev, lun, TMF_CLEAR_TASK_SET, 0);
+
+	if (res == TMF_RESP_FUNC_COMPLETE)
+		asd_clear_nexus_I_T_L(dev, lun);
+	return res;
+}
+
+int asd_lu_reset(struct domain_device *dev, u8 *lun)
+{
+	int res = asd_initiate_ssp_tmf(dev, lun, TMF_LU_RESET, 0);
+
+	if (res == TMF_RESP_FUNC_COMPLETE)
+		asd_clear_nexus_I_T_L(dev, lun);
+	return res;
+}
+
+/**
+ * asd_query_task -- send a QUERY TASK TMF to an I_T_L_Q nexus
+ * task: pointer to sas_task struct of interest
+ *
+ * Returns: TMF_RESP_FUNC_COMPLETE if the task is not in the task set,
+ * or TMF_RESP_FUNC_SUCC if the task is in the task set.
+ *
+ * Normally the management layer sets the task to aborted state,
+ * and then calls query task and then abort task.
+ */
+int asd_query_task(struct sas_task *task)
+{
+	struct asd_ascb *ascb = task->lldd_task;
+	int index;
+
+	if (ascb) {
+		index = ascb->tc_index;
+		return asd_initiate_ssp_tmf(task->dev, task->ssp_task.LUN,
+					    TMF_QUERY_TASK, index);
+	}
+	return TMF_RESP_FUNC_COMPLETE;
+}
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
new file mode 100644
index 000000000000..aafdc92f8312
--- /dev/null
+++ b/drivers/scsi/libsas/Kconfig
@@ -0,0 +1,39 @@
+#
+# Kernel configuration file for the SAS Class
+#
+# Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+#
+
+config SCSI_SAS_LIBSAS
+	tristate "SAS Domain Transport Attributes"
+	depends on SCSI
+	select SCSI_SAS_ATTRS
+	help
+	  This provides transport specific helpers for SAS drivers which
+	  use the domain device construct (like the aic94xxx).
+
+config SCSI_SAS_LIBSAS_DEBUG
+	bool "Compile the SAS Domain Transport Attributes in debug mode"
+	default y
+	depends on SCSI_SAS_LIBSAS
+	help
+		Compiles the SAS Layer in debug mode.  In debug mode, the
+		SAS Layer prints diagnostic and debug messages.
diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile
new file mode 100644
index 000000000000..44d972a3b4bd
--- /dev/null
+++ b/drivers/scsi/libsas/Makefile
@@ -0,0 +1,36 @@
+#
+# Kernel Makefile for the libsas helpers
+#
+# Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+ifeq ($(CONFIG_SCSI_SAS_LIBSAS_DEBUG),y)
+	EXTRA_CFLAGS += -DSAS_DEBUG
+endif
+
+obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o
+libsas-y +=  sas_init.o     \
+		sas_phy.o      \
+		sas_port.o     \
+		sas_event.o    \
+		sas_dump.o     \
+		sas_discover.o \
+		sas_expander.o \
+		sas_scsi_host.o
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
new file mode 100644
index 000000000000..d977bd492d8d
--- /dev/null
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -0,0 +1,749 @@
+/*
+ * Serial Attached SCSI (SAS) Discover process
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Basic task processing for discovery purposes ---------- */
+
+void sas_init_dev(struct domain_device *dev)
+{
+        INIT_LIST_HEAD(&dev->siblings);
+        INIT_LIST_HEAD(&dev->dev_list_node);
+        switch (dev->dev_type) {
+        case SAS_END_DEV:
+                break;
+        case EDGE_DEV:
+        case FANOUT_DEV:
+                INIT_LIST_HEAD(&dev->ex_dev.children);
+                break;
+        case SATA_DEV:
+        case SATA_PM:
+        case SATA_PM_PORT:
+                INIT_LIST_HEAD(&dev->sata_dev.children);
+                break;
+        default:
+                break;
+        }
+}
+
+static void sas_task_timedout(unsigned long _task)
+{
+	struct sas_task *task = (void *) _task;
+	unsigned long flags;
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+		task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	complete(&task->completion);
+}
+
+static void sas_disc_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->timer))
+		return;
+	complete(&task->completion);
+}
+
+#define SAS_DEV_TIMEOUT 10
+
+/**
+ * sas_execute_task -- Basic task processing for discovery
+ * @task: the task to be executed
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_execute_task(struct sas_task *task, void *buffer, int size,
+			    int pci_dma_dir)
+{
+	int res = 0;
+	struct scatterlist *scatter = NULL;
+	struct task_status_struct *ts = &task->task_status;
+	int num_scatter = 0;
+	int retries = 0;
+	struct sas_internal *i =
+		to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+	if (pci_dma_dir != PCI_DMA_NONE) {
+		scatter = kzalloc(sizeof(*scatter), GFP_KERNEL);
+		if (!scatter)
+			goto out;
+
+		sg_init_one(scatter, buffer, size);
+		num_scatter = 1;
+	}
+
+	task->task_proto = task->dev->tproto;
+	task->scatter = scatter;
+	task->num_scatter = num_scatter;
+	task->total_xfer_len = size;
+	task->data_dir = pci_dma_dir;
+	task->task_done = sas_disc_task_done;
+
+	for (retries = 0; retries < 5; retries++) {
+		task->task_state_flags = SAS_TASK_STATE_PENDING;
+		init_completion(&task->completion);
+
+		task->timer.data = (unsigned long) task;
+		task->timer.function = sas_task_timedout;
+		task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
+		add_timer(&task->timer);
+
+		res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+		if (res) {
+			del_timer(&task->timer);
+			SAS_DPRINTK("executing SAS discovery task failed:%d\n",
+				    res);
+			goto ex_err;
+		}
+		wait_for_completion(&task->completion);
+		res = -ETASK;
+		if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+			int res2;
+			SAS_DPRINTK("task aborted, flags:0x%x\n",
+				    task->task_state_flags);
+			res2 = i->dft->lldd_abort_task(task);
+			SAS_DPRINTK("came back from abort task\n");
+			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+				if (res2 == TMF_RESP_FUNC_COMPLETE)
+					continue; /* Retry the task */
+				else
+					goto ex_err;
+			}
+		}
+		if (task->task_status.stat == SAM_BUSY ||
+			   task->task_status.stat == SAM_TASK_SET_FULL ||
+			   task->task_status.stat == SAS_QUEUE_FULL) {
+			SAS_DPRINTK("task: q busy, sleeping...\n");
+			schedule_timeout_interruptible(HZ);
+		} else if (task->task_status.stat == SAM_CHECK_COND) {
+			struct scsi_sense_hdr shdr;
+
+			if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
+						  &shdr)) {
+				SAS_DPRINTK("couldn't normalize sense\n");
+				continue;
+			}
+			if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
+			    (shdr.sense_key == 2 && shdr.asc == 4 &&
+			     shdr.ascq == 1)) {
+				SAS_DPRINTK("device %016llx LUN: %016llx "
+					    "powering up or not ready yet, "
+					    "sleeping...\n",
+					    SAS_ADDR(task->dev->sas_addr),
+					    SAS_ADDR(task->ssp_task.LUN));
+
+				schedule_timeout_interruptible(5*HZ);
+			} else if (shdr.sense_key == 1) {
+				res = 0;
+				break;
+			} else if (shdr.sense_key == 5) {
+				break;
+			} else {
+				SAS_DPRINTK("dev %016llx LUN: %016llx "
+					    "sense key:0x%x ASC:0x%x ASCQ:0x%x"
+					    "\n",
+					    SAS_ADDR(task->dev->sas_addr),
+					    SAS_ADDR(task->ssp_task.LUN),
+					    shdr.sense_key,
+					    shdr.asc, shdr.ascq);
+			}
+		} else if (task->task_status.resp != SAS_TASK_COMPLETE ||
+			   task->task_status.stat != SAM_GOOD) {
+			SAS_DPRINTK("task finished with resp:0x%x, "
+				    "stat:0x%x\n",
+				    task->task_status.resp,
+				    task->task_status.stat);
+			goto ex_err;
+		} else {
+			res = 0;
+			break;
+		}
+	}
+ex_err:
+	if (pci_dma_dir != PCI_DMA_NONE)
+		kfree(scatter);
+out:
+	return res;
+}
+
+/* ---------- Domain device discovery ---------- */
+
+/**
+ * sas_get_port_device -- Discover devices which caused port creation
+ * @port: pointer to struct sas_port of interest
+ *
+ * Devices directly attached to a HA port, have no parent.  This is
+ * how we know they are (domain) "root" devices.  All other devices
+ * do, and should have their "parent" pointer set appropriately as
+ * soon as a child device is discovered.
+ */
+static int sas_get_port_device(struct asd_sas_port *port)
+{
+	unsigned long flags;
+	struct asd_sas_phy *phy;
+	struct sas_rphy *rphy;
+	struct domain_device *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&port->phy_list_lock, flags);
+	if (list_empty(&port->phy_list)) {
+		spin_unlock_irqrestore(&port->phy_list_lock, flags);
+		kfree(dev);
+		return -ENODEV;
+	}
+	phy = container_of(port->phy_list.next, struct asd_sas_phy, port_phy_el);
+	spin_lock(&phy->frame_rcvd_lock);
+	memcpy(dev->frame_rcvd, phy->frame_rcvd, min(sizeof(dev->frame_rcvd),
+					     (size_t)phy->frame_rcvd_size));
+	spin_unlock(&phy->frame_rcvd_lock);
+	spin_unlock_irqrestore(&port->phy_list_lock, flags);
+
+	if (dev->frame_rcvd[0] == 0x34 && port->oob_mode == SATA_OOB_MODE) {
+		struct dev_to_host_fis *fis =
+			(struct dev_to_host_fis *) dev->frame_rcvd;
+		if (fis->interrupt_reason == 1 && fis->lbal == 1 &&
+		    fis->byte_count_low==0x69 && fis->byte_count_high == 0x96
+		    && (fis->device & ~0x10) == 0)
+			dev->dev_type = SATA_PM;
+		else
+			dev->dev_type = SATA_DEV;
+		dev->tproto = SATA_PROTO;
+	} else {
+		struct sas_identify_frame *id =
+			(struct sas_identify_frame *) dev->frame_rcvd;
+		dev->dev_type = id->dev_type;
+		dev->iproto = id->initiator_bits;
+		dev->tproto = id->target_bits;
+	}
+
+	sas_init_dev(dev);
+
+	switch (dev->dev_type) {
+	case SAS_END_DEV:
+		rphy = sas_end_device_alloc(port->port);
+		break;
+	case EDGE_DEV:
+		rphy = sas_expander_alloc(port->port,
+					  SAS_EDGE_EXPANDER_DEVICE);
+		break;
+	case FANOUT_DEV:
+		rphy = sas_expander_alloc(port->port,
+					  SAS_FANOUT_EXPANDER_DEVICE);
+		break;
+	case SATA_DEV:
+	default:
+		printk("ERROR: Unidentified device type %d\n", dev->dev_type);
+		rphy = NULL;
+		break;
+	}
+
+	if (!rphy) {
+		kfree(dev);
+		return -ENODEV;
+	}
+	rphy->identify.phy_identifier = phy->phy->identify.phy_identifier;
+	memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE);
+	sas_fill_in_rphy(dev, rphy);
+	sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+	port->port_dev = dev;
+	dev->port = port;
+	dev->linkrate = port->linkrate;
+	dev->min_linkrate = port->linkrate;
+	dev->max_linkrate = port->linkrate;
+	dev->pathways = port->num_phys;
+	memset(port->disc.fanout_sas_addr, 0, SAS_ADDR_SIZE);
+	memset(port->disc.eeds_a, 0, SAS_ADDR_SIZE);
+	memset(port->disc.eeds_b, 0, SAS_ADDR_SIZE);
+	port->disc.max_level = 0;
+
+	dev->rphy = rphy;
+	spin_lock(&port->dev_list_lock);
+	list_add_tail(&dev->dev_list_node, &port->dev_list);
+	spin_unlock(&port->dev_list_lock);
+
+	return 0;
+}
+
+/* ---------- Discover and Revalidate ---------- */
+
+/* ---------- SATA ---------- */
+
+static void sas_get_ata_command_set(struct domain_device *dev)
+{
+	struct dev_to_host_fis *fis =
+		(struct dev_to_host_fis *) dev->frame_rcvd;
+
+	if ((fis->sector_count == 1 && /* ATA */
+	     fis->lbal         == 1 &&
+	     fis->lbam         == 0 &&
+	     fis->lbah         == 0 &&
+	     fis->device       == 0)
+	    ||
+	    (fis->sector_count == 0 && /* CE-ATA (mATA) */
+	     fis->lbal         == 0 &&
+	     fis->lbam         == 0xCE &&
+	     fis->lbah         == 0xAA &&
+	     (fis->device & ~0x10) == 0))
+
+		dev->sata_dev.command_set = ATA_COMMAND_SET;
+
+	else if ((fis->interrupt_reason == 1 &&	/* ATAPI */
+		  fis->lbal             == 1 &&
+		  fis->byte_count_low   == 0x14 &&
+		  fis->byte_count_high  == 0xEB &&
+		  (fis->device & ~0x10) == 0))
+
+		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+
+	else if ((fis->sector_count == 1 && /* SEMB */
+		  fis->lbal         == 1 &&
+		  fis->lbam         == 0x3C &&
+		  fis->lbah         == 0xC3 &&
+		  fis->device       == 0)
+		||
+		 (fis->interrupt_reason == 1 &&	/* SATA PM */
+		  fis->lbal             == 1 &&
+		  fis->byte_count_low   == 0x69 &&
+		  fis->byte_count_high  == 0x96 &&
+		  (fis->device & ~0x10) == 0))
+
+		/* Treat it as a superset? */
+		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+}
+
+/**
+ * sas_issue_ata_cmd -- Basic SATA command processing for discovery
+ * @dev: the device to send the command to
+ * @command: the command register
+ * @features: the features register
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
+			     u8 features, void *buffer, int size,
+			     int pci_dma_dir)
+{
+	int res = 0;
+	struct sas_task *task;
+	struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
+		&dev->frame_rcvd[0];
+
+	res = -ENOMEM;
+	task = sas_alloc_task(GFP_KERNEL);
+	if (!task)
+		goto out;
+
+	task->dev = dev;
+
+	task->ata_task.fis.command = command;
+	task->ata_task.fis.features = features;
+	task->ata_task.fis.device = d2h_fis->device;
+	task->ata_task.retry_count = 1;
+
+	res = sas_execute_task(task, buffer, size, pci_dma_dir);
+
+	sas_free_task(task);
+out:
+	return res;
+}
+
+static void sas_sata_propagate_sas_addr(struct domain_device *dev)
+{
+	unsigned long flags;
+	struct asd_sas_port *port = dev->port;
+	struct asd_sas_phy  *phy;
+
+	BUG_ON(dev->parent);
+
+	memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+	spin_lock_irqsave(&port->phy_list_lock, flags);
+	list_for_each_entry(phy, &port->phy_list, port_phy_el)
+		memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+	spin_unlock_irqrestore(&port->phy_list_lock, flags);
+}
+
+#define ATA_IDENTIFY_DEV         0xEC
+#define ATA_IDENTIFY_PACKET_DEV  0xA1
+#define ATA_SET_FEATURES         0xEF
+#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
+
+/**
+ * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
+ * @dev: STP/SATA device of interest (ATA/ATAPI)
+ *
+ * The LLDD has already been notified of this device, so that we can
+ * send FISes to it.  Here we try to get IDENTIFY DEVICE or IDENTIFY
+ * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
+ * performance for this device.
+ */
+static int sas_discover_sata_dev(struct domain_device *dev)
+{
+	int     res;
+	__le16  *identify_x;
+	u8      command;
+
+	identify_x = kzalloc(512, GFP_KERNEL);
+	if (!identify_x)
+		return -ENOMEM;
+
+	if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
+		dev->sata_dev.identify_device = identify_x;
+		command = ATA_IDENTIFY_DEV;
+	} else {
+		dev->sata_dev.identify_packet_device = identify_x;
+		command = ATA_IDENTIFY_PACKET_DEV;
+	}
+
+	res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+				PCI_DMA_FROMDEVICE);
+	if (res)
+		goto out_err;
+
+	/* lives on the media? */
+	if (le16_to_cpu(identify_x[0]) & 4) {
+		/* incomplete response */
+		SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
+			    "dev %llx\n", SAS_ADDR(dev->sas_addr));
+		if (!le16_to_cpu(identify_x[83] & (1<<6)))
+			goto cont1;
+		res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
+					ATA_FEATURE_PUP_STBY_SPIN_UP,
+					NULL, 0, PCI_DMA_NONE);
+		if (res)
+			goto cont1;
+
+		schedule_timeout_interruptible(5*HZ); /* More time? */
+		res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+					PCI_DMA_FROMDEVICE);
+		if (res)
+			goto out_err;
+	}
+cont1:
+	/* Get WWN */
+	if (dev->port->oob_mode != SATA_OOB_MODE) {
+		memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
+		       SAS_ADDR_SIZE);
+	} else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
+		   (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
+		   == 0x5000) {
+		int i;
+
+		for (i = 0; i < 4; i++) {
+			dev->sas_addr[2*i] =
+	     (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
+			dev->sas_addr[2*i+1] =
+	      le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
+		}
+	}
+	sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+	if (!dev->parent)
+		sas_sata_propagate_sas_addr(dev);
+
+	/* XXX Hint: register this SATA device with SATL.
+	   When this returns, dev->sata_dev->lu is alive and
+	   present.
+	sas_satl_register_dev(dev);
+	*/
+	return 0;
+out_err:
+	dev->sata_dev.identify_packet_device = NULL;
+	dev->sata_dev.identify_device = NULL;
+	kfree(identify_x);
+	return res;
+}
+
+static int sas_discover_sata_pm(struct domain_device *dev)
+{
+	return -ENODEV;
+}
+
+int sas_notify_lldd_dev_found(struct domain_device *dev)
+{
+	int res = 0;
+	struct sas_ha_struct *sas_ha = dev->port->ha;
+	struct Scsi_Host *shost = sas_ha->core.shost;
+	struct sas_internal *i = to_sas_internal(shost->transportt);
+
+	if (i->dft->lldd_dev_found) {
+		res = i->dft->lldd_dev_found(dev);
+		if (res) {
+			printk("sas: driver on pcidev %s cannot handle "
+			       "device %llx, error:%d\n",
+			       pci_name(sas_ha->pcidev),
+			       SAS_ADDR(dev->sas_addr), res);
+		}
+	}
+	return res;
+}
+
+
+void sas_notify_lldd_dev_gone(struct domain_device *dev)
+{
+	struct sas_ha_struct *sas_ha = dev->port->ha;
+	struct Scsi_Host *shost = sas_ha->core.shost;
+	struct sas_internal *i = to_sas_internal(shost->transportt);
+
+	if (i->dft->lldd_dev_gone)
+		i->dft->lldd_dev_gone(dev);
+}
+
+/* ---------- Common/dispatchers ---------- */
+
+/**
+ * sas_discover_sata -- discover an STP/SATA domain device
+ * @dev: pointer to struct domain_device of interest
+ *
+ * First we notify the LLDD of this device, so we can send frames to
+ * it.  Then depending on the type of device we call the appropriate
+ * discover functions.  Once device discover is done, we notify the
+ * LLDD so that it can fine-tune its parameters for the device, by
+ * removing it and then adding it.  That is, the second time around,
+ * the driver would have certain fields, that it is looking at, set.
+ * Finally we initialize the kobj so that the device can be added to
+ * the system at registration time.  Devices directly attached to a HA
+ * port, have no parents.  All other devices do, and should have their
+ * "parent" pointer set appropriately before calling this function.
+ */
+int sas_discover_sata(struct domain_device *dev)
+{
+	int res;
+
+	sas_get_ata_command_set(dev);
+
+	res = sas_notify_lldd_dev_found(dev);
+	if (res)
+		return res;
+
+	switch (dev->dev_type) {
+	case SATA_DEV:
+		res = sas_discover_sata_dev(dev);
+		break;
+	case SATA_PM:
+		res = sas_discover_sata_pm(dev);
+		break;
+	default:
+		break;
+	}
+
+	sas_notify_lldd_dev_gone(dev);
+	if (!res) {
+		sas_notify_lldd_dev_found(dev);
+	}
+	return res;
+}
+
+/**
+ * sas_discover_end_dev -- discover an end device (SSP, etc)
+ * @end: pointer to domain device of interest
+ *
+ * See comment in sas_discover_sata().
+ */
+int sas_discover_end_dev(struct domain_device *dev)
+{
+	int res;
+
+	res = sas_notify_lldd_dev_found(dev);
+	if (res)
+		return res;
+
+	res = sas_rphy_add(dev->rphy);
+	if (res)
+		goto out_err;
+
+	/* do this to get the end device port attributes which will have
+	 * been scanned in sas_rphy_add */
+	sas_notify_lldd_dev_gone(dev);
+	sas_notify_lldd_dev_found(dev);
+
+	return 0;
+
+out_err:
+	sas_notify_lldd_dev_gone(dev);
+	return res;
+}
+
+/* ---------- Device registration and unregistration ---------- */
+
+static inline void sas_unregister_common_dev(struct domain_device *dev)
+{
+	sas_notify_lldd_dev_gone(dev);
+	if (!dev->parent)
+		dev->port->port_dev = NULL;
+	else
+		list_del_init(&dev->siblings);
+	list_del_init(&dev->dev_list_node);
+}
+
+void sas_unregister_dev(struct domain_device *dev)
+{
+	if (dev->rphy) {
+		sas_remove_children(&dev->rphy->dev);
+		sas_rphy_delete(dev->rphy);
+		dev->rphy = NULL;
+	}
+	if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) {
+		/* remove the phys and ports, everything else should be gone */
+		kfree(dev->ex_dev.ex_phy);
+		dev->ex_dev.ex_phy = NULL;
+	}
+	sas_unregister_common_dev(dev);
+}
+
+void sas_unregister_domain_devices(struct asd_sas_port *port)
+{
+	struct domain_device *dev, *n;
+
+	list_for_each_entry_safe_reverse(dev,n,&port->dev_list,dev_list_node)
+		sas_unregister_dev(dev);
+
+	port->port->rphy = NULL;
+
+}
+
+/* ---------- Discovery and Revalidation ---------- */
+
+/**
+ * sas_discover_domain -- discover the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered.  Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+static void sas_discover_domain(void *data)
+{
+	int error = 0;
+	struct asd_sas_port *port = data;
+
+	sas_begin_event(DISCE_DISCOVER_DOMAIN, &port->disc.disc_event_lock,
+			&port->disc.pending);
+
+	if (port->port_dev)
+		return ;
+	else {
+		error = sas_get_port_device(port);
+		if (error)
+			return;
+	}
+
+	SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
+		    current->pid);
+
+	switch (port->port_dev->dev_type) {
+	case SAS_END_DEV:
+		error = sas_discover_end_dev(port->port_dev);
+		break;
+	case EDGE_DEV:
+	case FANOUT_DEV:
+		error = sas_discover_root_expander(port->port_dev);
+		break;
+	case SATA_DEV:
+	case SATA_PM:
+		error = sas_discover_sata(port->port_dev);
+		break;
+	default:
+		SAS_DPRINTK("unhandled device %d\n", port->port_dev->dev_type);
+		break;
+	}
+
+	if (error) {
+		kfree(port->port_dev); /* not kobject_register-ed yet */
+		port->port_dev = NULL;
+	}
+
+	SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
+		    current->pid, error);
+}
+
+static void sas_revalidate_domain(void *data)
+{
+	int res = 0;
+	struct asd_sas_port *port = data;
+
+	sas_begin_event(DISCE_REVALIDATE_DOMAIN, &port->disc.disc_event_lock,
+			&port->disc.pending);
+
+	SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
+		    current->pid);
+	if (port->port_dev)
+		res = sas_ex_revalidate_domain(port->port_dev);
+
+	SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
+		    port->id, current->pid, res);
+}
+
+/* ---------- Events ---------- */
+
+int sas_discover_event(struct asd_sas_port *port, enum discover_event ev)
+{
+	struct sas_discovery *disc;
+
+	if (!port)
+		return 0;
+	disc = &port->disc;
+
+	BUG_ON(ev >= DISC_NUM_EVENTS);
+
+	sas_queue_event(ev, &disc->disc_event_lock, &disc->pending,
+			&disc->disc_work[ev], port->ha->core.shost);
+
+	return 0;
+}
+
+/**
+ * sas_init_disc -- initialize the discovery struct in the port
+ * @port: pointer to struct port
+ *
+ * Called when the ports are being initialized.
+ */
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port)
+{
+	int i;
+
+	static void (*sas_event_fns[DISC_NUM_EVENTS])(void *) = {
+		[DISCE_DISCOVER_DOMAIN] = sas_discover_domain,
+		[DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain,
+	};
+
+	spin_lock_init(&disc->disc_event_lock);
+	disc->pending = 0;
+	for (i = 0; i < DISC_NUM_EVENTS; i++)
+		INIT_WORK(&disc->disc_work[i], sas_event_fns[i], port);
+}
diff --git a/drivers/scsi/libsas/sas_dump.c b/drivers/scsi/libsas/sas_dump.c
new file mode 100644
index 000000000000..f1246d2c9bef
--- /dev/null
+++ b/drivers/scsi/libsas/sas_dump.c
@@ -0,0 +1,76 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include "sas_dump.h"
+
+#ifdef SAS_DEBUG
+
+static const char *sas_hae_str[] = {
+	[0] = "HAE_RESET",
+};
+
+static const char *sas_porte_str[] = {
+	[0] = "PORTE_BYTES_DMAED",
+	[1] = "PORTE_BROADCAST_RCVD",
+	[2] = "PORTE_LINK_RESET_ERR",
+	[3] = "PORTE_TIMER_EVENT",
+	[4] = "PORTE_HARD_RESET",
+};
+
+static const char *sas_phye_str[] = {
+	[0] = "PHYE_LOSS_OF_SIGNAL",
+	[1] = "PHYE_OOB_DONE",
+	[2] = "PHYE_OOB_ERROR",
+	[3] = "PHYE_SPINUP_HOLD",
+};
+
+void sas_dprint_porte(int phyid, enum port_event pe)
+{
+	SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
+}
+void sas_dprint_phye(int phyid, enum phy_event pe)
+{
+	SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
+}
+
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he)
+{
+	SAS_DPRINTK("ha %s: %s event\n", pci_name(sas_ha->pcidev),
+		    sas_hae_str[he]);
+}
+
+void sas_dump_port(struct asd_sas_port *port)
+{
+	SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
+	SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
+		    SAS_ADDR(port->sas_addr));
+	SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
+		    SAS_ADDR(port->attached_sas_addr));
+	SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
+	SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
+	SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
+	SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
+}
+
+#endif /* SAS_DEBUG */
diff --git a/drivers/scsi/libsas/sas_dump.h b/drivers/scsi/libsas/sas_dump.h
new file mode 100644
index 000000000000..47b45d4f5258
--- /dev/null
+++ b/drivers/scsi/libsas/sas_dump.h
@@ -0,0 +1,42 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#ifdef SAS_DEBUG
+
+void sas_dprint_porte(int phyid, enum port_event pe);
+void sas_dprint_phye(int phyid, enum phy_event pe);
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he);
+void sas_dump_port(struct asd_sas_port *port);
+
+#else /* SAS_DEBUG */
+
+static inline void sas_dprint_porte(int phyid, enum port_event pe) { }
+static inline void sas_dprint_phye(int phyid, enum phy_event pe) { }
+static inline void sas_dprint_hae(struct sas_ha_struct *sas_ha,
+				  enum ha_event he) { }
+static inline void sas_dump_port(struct asd_sas_port *port) { }
+
+#endif /* SAS_DEBUG */
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
new file mode 100644
index 000000000000..19110ed1c89c
--- /dev/null
+++ b/drivers/scsi/libsas/sas_event.c
@@ -0,0 +1,75 @@
+/*
+ * Serial Attached SCSI (SAS) Event processing
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <scsi/scsi_host.h>
+#include "sas_internal.h"
+#include "sas_dump.h"
+
+static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event)
+{
+	BUG_ON(event >= HA_NUM_EVENTS);
+
+	sas_queue_event(event, &sas_ha->event_lock, &sas_ha->pending,
+			&sas_ha->ha_events[event], sas_ha->core.shost);
+}
+
+static void notify_port_event(struct asd_sas_phy *phy, enum port_event event)
+{
+	struct sas_ha_struct *ha = phy->ha;
+
+	BUG_ON(event >= PORT_NUM_EVENTS);
+
+	sas_queue_event(event, &ha->event_lock, &phy->port_events_pending,
+			&phy->port_events[event], ha->core.shost);
+}
+
+static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
+{
+	struct sas_ha_struct *ha = phy->ha;
+
+	BUG_ON(event >= PHY_NUM_EVENTS);
+
+	sas_queue_event(event, &ha->event_lock, &phy->phy_events_pending,
+			&phy->phy_events[event], ha->core.shost);
+}
+
+int sas_init_events(struct sas_ha_struct *sas_ha)
+{
+	static void (*sas_ha_event_fns[HA_NUM_EVENTS])(void *) = {
+		[HAE_RESET] = sas_hae_reset,
+	};
+
+	int i;
+
+	spin_lock_init(&sas_ha->event_lock);
+
+	for (i = 0; i < HA_NUM_EVENTS; i++)
+		INIT_WORK(&sas_ha->ha_events[i], sas_ha_event_fns[i], sas_ha);
+
+	sas_ha->notify_ha_event = notify_ha_event;
+	sas_ha->notify_port_event = notify_port_event;
+	sas_ha->notify_phy_event = notify_phy_event;
+
+	return 0;
+}
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
new file mode 100644
index 000000000000..b653a263f76a
--- /dev/null
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -0,0 +1,1862 @@
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static int sas_discover_expander(struct domain_device *dev);
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+			     u8 *sas_addr, int include);
+static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr);
+
+#if 0
+/* FIXME: smp needs to migrate into the sas class */
+static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t);
+static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t);
+#endif
+
+/* ---------- SMP task management ---------- */
+
+static void smp_task_timedout(unsigned long _task)
+{
+	struct sas_task *task = (void *) _task;
+	unsigned long flags;
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+		task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	complete(&task->completion);
+}
+
+static void smp_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->timer))
+		return;
+	complete(&task->completion);
+}
+
+/* Give it some long enough timeout. In seconds. */
+#define SMP_TIMEOUT 10
+
+static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
+			    void *resp, int resp_size)
+{
+	int res;
+	struct sas_task *task = sas_alloc_task(GFP_KERNEL);
+	struct sas_internal *i =
+		to_sas_internal(dev->port->ha->core.shost->transportt);
+
+	if (!task)
+		return -ENOMEM;
+
+	task->dev = dev;
+	task->task_proto = dev->tproto;
+	sg_init_one(&task->smp_task.smp_req, req, req_size);
+	sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
+
+	task->task_done = smp_task_done;
+
+	task->timer.data = (unsigned long) task;
+	task->timer.function = smp_task_timedout;
+	task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
+	add_timer(&task->timer);
+
+	res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+
+	if (res) {
+		del_timer(&task->timer);
+		SAS_DPRINTK("executing SMP task failed:%d\n", res);
+		goto ex_err;
+	}
+
+	wait_for_completion(&task->completion);
+	res = -ETASK;
+	if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+		SAS_DPRINTK("smp task timed out or aborted\n");
+		i->dft->lldd_abort_task(task);
+		if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+			SAS_DPRINTK("SMP task aborted and not done\n");
+			goto ex_err;
+		}
+	}
+	if (task->task_status.resp == SAS_TASK_COMPLETE &&
+	    task->task_status.stat == SAM_GOOD)
+		res = 0;
+	else
+		SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
+			    "status 0x%x\n", __FUNCTION__,
+			    SAS_ADDR(dev->sas_addr),
+			    task->task_status.resp,
+			    task->task_status.stat);
+ex_err:
+	sas_free_task(task);
+	return res;
+}
+
+/* ---------- Allocations ---------- */
+
+static inline void *alloc_smp_req(int size)
+{
+	u8 *p = kzalloc(size, GFP_KERNEL);
+	if (p)
+		p[0] = SMP_REQUEST;
+	return p;
+}
+
+static inline void *alloc_smp_resp(int size)
+{
+	return kzalloc(size, GFP_KERNEL);
+}
+
+/* ---------- Expander configuration ---------- */
+
+static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
+			   void *disc_resp)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+	struct smp_resp *resp = disc_resp;
+	struct discover_resp *dr = &resp->disc;
+	struct sas_rphy *rphy = dev->rphy;
+	int rediscover = (phy->phy != NULL);
+
+	if (!rediscover) {
+		phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
+
+		/* FIXME: error_handling */
+		BUG_ON(!phy->phy);
+	}
+
+	switch (resp->result) {
+	case SMP_RESP_PHY_VACANT:
+		phy->phy_state = PHY_VACANT;
+		return;
+	default:
+		phy->phy_state = PHY_NOT_PRESENT;
+		return;
+	case SMP_RESP_FUNC_ACC:
+		phy->phy_state = PHY_EMPTY; /* do not know yet */
+		break;
+	}
+
+	phy->phy_id = phy_id;
+	phy->attached_dev_type = dr->attached_dev_type;
+	phy->linkrate = dr->linkrate;
+	phy->attached_sata_host = dr->attached_sata_host;
+	phy->attached_sata_dev  = dr->attached_sata_dev;
+	phy->attached_sata_ps   = dr->attached_sata_ps;
+	phy->attached_iproto = dr->iproto << 1;
+	phy->attached_tproto = dr->tproto << 1;
+	memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
+	phy->attached_phy_id = dr->attached_phy_id;
+	phy->phy_change_count = dr->change_count;
+	phy->routing_attr = dr->routing_attr;
+	phy->virtual = dr->virtual;
+	phy->last_da_index = -1;
+
+	phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
+	phy->phy->identify.target_port_protocols = phy->attached_tproto;
+	phy->phy->identify.phy_identifier = phy_id;
+	phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+	phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+	phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+	switch (phy->linkrate) {
+	case PHY_LINKRATE_1_5:
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+		break;
+	case PHY_LINKRATE_3:
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+		break;
+	case PHY_LINKRATE_6:
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+		break;
+	default:
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+		break;
+	}
+
+	if (!rediscover)
+		sas_phy_add(phy->phy);
+
+	SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n",
+		    SAS_ADDR(dev->sas_addr), phy->phy_id,
+		    phy->routing_attr == TABLE_ROUTING ? 'T' :
+		    phy->routing_attr == DIRECT_ROUTING ? 'D' :
+		    phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?',
+		    SAS_ADDR(phy->attached_sas_addr));
+
+	return;
+}
+
+#define DISCOVER_REQ_SIZE  16
+#define DISCOVER_RESP_SIZE 56
+
+static int sas_ex_phy_discover(struct domain_device *dev, int single)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int  res = 0;
+	u8   *disc_req;
+	u8   *disc_resp;
+
+	disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+	if (!disc_req)
+		return -ENOMEM;
+
+	disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE);
+	if (!disc_resp) {
+		kfree(disc_req);
+		return -ENOMEM;
+	}
+
+	disc_req[1] = SMP_DISCOVER;
+
+	if (0 <= single && single < ex->num_phys) {
+		disc_req[9] = single;
+		res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+				       disc_resp, DISCOVER_RESP_SIZE);
+		if (res)
+			goto out_err;
+		sas_set_ex_phy(dev, single, disc_resp);
+	} else {
+		int i;
+
+		for (i = 0; i < ex->num_phys; i++) {
+			disc_req[9] = i;
+			res = smp_execute_task(dev, disc_req,
+					       DISCOVER_REQ_SIZE, disc_resp,
+					       DISCOVER_RESP_SIZE);
+			if (res)
+				goto out_err;
+			sas_set_ex_phy(dev, i, disc_resp);
+		}
+	}
+out_err:
+	kfree(disc_resp);
+	kfree(disc_req);
+	return res;
+}
+
+static int sas_expander_discover(struct domain_device *dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int res = -ENOMEM;
+
+	ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL);
+	if (!ex->ex_phy)
+		return -ENOMEM;
+
+	res = sas_ex_phy_discover(dev, -1);
+	if (res)
+		goto out_err;
+
+	return 0;
+ out_err:
+	kfree(ex->ex_phy);
+	ex->ex_phy = NULL;
+	return res;
+}
+
+#define MAX_EXPANDER_PHYS 128
+
+static void ex_assign_report_general(struct domain_device *dev,
+					    struct smp_resp *resp)
+{
+	struct report_general_resp *rg = &resp->rg;
+
+	dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
+	dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
+	dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
+	dev->ex_dev.conf_route_table = rg->conf_route_table;
+	dev->ex_dev.configuring = rg->configuring;
+	memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
+}
+
+#define RG_REQ_SIZE   8
+#define RG_RESP_SIZE 32
+
+static int sas_ex_general(struct domain_device *dev)
+{
+	u8 *rg_req;
+	struct smp_resp *rg_resp;
+	int res;
+	int i;
+
+	rg_req = alloc_smp_req(RG_REQ_SIZE);
+	if (!rg_req)
+		return -ENOMEM;
+
+	rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+	if (!rg_resp) {
+		kfree(rg_req);
+		return -ENOMEM;
+	}
+
+	rg_req[1] = SMP_REPORT_GENERAL;
+
+	for (i = 0; i < 5; i++) {
+		res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+				       RG_RESP_SIZE);
+
+		if (res) {
+			SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
+				    SAS_ADDR(dev->sas_addr), res);
+			goto out;
+		} else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+			SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
+				    SAS_ADDR(dev->sas_addr), rg_resp->result);
+			res = rg_resp->result;
+			goto out;
+		}
+
+		ex_assign_report_general(dev, rg_resp);
+
+		if (dev->ex_dev.configuring) {
+			SAS_DPRINTK("RG: ex %llx self-configuring...\n",
+				    SAS_ADDR(dev->sas_addr));
+			schedule_timeout_interruptible(5*HZ);
+		} else
+			break;
+	}
+out:
+	kfree(rg_req);
+	kfree(rg_resp);
+	return res;
+}
+
+static void ex_assign_manuf_info(struct domain_device *dev, void
+					*_mi_resp)
+{
+	u8 *mi_resp = _mi_resp;
+	struct sas_rphy *rphy = dev->rphy;
+	struct sas_expander_device *edev = rphy_to_expander_device(rphy);
+
+	memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
+	memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
+	memcpy(edev->product_rev, mi_resp + 36,
+	       SAS_EXPANDER_PRODUCT_REV_LEN);
+
+	if (mi_resp[8] & 1) {
+		memcpy(edev->component_vendor_id, mi_resp + 40,
+		       SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+		edev->component_id = mi_resp[48] << 8 | mi_resp[49];
+		edev->component_revision_id = mi_resp[50];
+	}
+}
+
+#define MI_REQ_SIZE   8
+#define MI_RESP_SIZE 64
+
+static int sas_ex_manuf_info(struct domain_device *dev)
+{
+	u8 *mi_req;
+	u8 *mi_resp;
+	int res;
+
+	mi_req = alloc_smp_req(MI_REQ_SIZE);
+	if (!mi_req)
+		return -ENOMEM;
+
+	mi_resp = alloc_smp_resp(MI_RESP_SIZE);
+	if (!mi_resp) {
+		kfree(mi_req);
+		return -ENOMEM;
+	}
+
+	mi_req[1] = SMP_REPORT_MANUF_INFO;
+
+	res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
+	if (res) {
+		SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
+			    SAS_ADDR(dev->sas_addr), res);
+		goto out;
+	} else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
+		SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
+			    SAS_ADDR(dev->sas_addr), mi_resp[2]);
+		goto out;
+	}
+
+	ex_assign_manuf_info(dev, mi_resp);
+out:
+	kfree(mi_req);
+	kfree(mi_resp);
+	return res;
+}
+
+#define PC_REQ_SIZE  44
+#define PC_RESP_SIZE 8
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+			enum phy_func phy_func)
+{
+	u8 *pc_req;
+	u8 *pc_resp;
+	int res;
+
+	pc_req = alloc_smp_req(PC_REQ_SIZE);
+	if (!pc_req)
+		return -ENOMEM;
+
+	pc_resp = alloc_smp_resp(PC_RESP_SIZE);
+	if (!pc_resp) {
+		kfree(pc_req);
+		return -ENOMEM;
+	}
+
+	pc_req[1] = SMP_PHY_CONTROL;
+	pc_req[9] = phy_id;
+	pc_req[10]= phy_func;
+
+	res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
+
+	kfree(pc_resp);
+	kfree(pc_req);
+	return res;
+}
+
+static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+
+	sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE);
+	phy->linkrate = PHY_DISABLED;
+}
+
+static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int i;
+
+	for (i = 0; i < ex->num_phys; i++) {
+		struct ex_phy *phy = &ex->ex_phy[i];
+
+		if (phy->phy_state == PHY_VACANT ||
+		    phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
+			sas_ex_disable_phy(dev, i);
+	}
+}
+
+static int sas_dev_present_in_domain(struct asd_sas_port *port,
+					    u8 *sas_addr)
+{
+	struct domain_device *dev;
+
+	if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
+		return 1;
+	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+		if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
+			return 1;
+	}
+	return 0;
+}
+
+#define RPEL_REQ_SIZE	16
+#define RPEL_RESP_SIZE	32
+int sas_smp_get_phy_events(struct sas_phy *phy)
+{
+	int res;
+	struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+	struct domain_device *dev = sas_find_dev_by_rphy(rphy);
+	u8 *req = alloc_smp_req(RPEL_REQ_SIZE);
+	u8 *resp = kzalloc(RPEL_RESP_SIZE, GFP_KERNEL);
+
+	if (!resp)
+		return -ENOMEM;
+
+	req[1] = SMP_REPORT_PHY_ERR_LOG;
+	req[9] = phy->number;
+
+	res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
+			            resp, RPEL_RESP_SIZE);
+
+	if (!res)
+		goto out;
+
+	phy->invalid_dword_count = scsi_to_u32(&resp[12]);
+	phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
+	phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
+	phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
+
+ out:
+	kfree(resp);
+	return res;
+
+}
+
+#define RPS_REQ_SIZE  16
+#define RPS_RESP_SIZE 60
+
+static int sas_get_report_phy_sata(struct domain_device *dev,
+					  int phy_id,
+					  struct smp_resp *rps_resp)
+{
+	int res;
+	u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
+
+	if (!rps_req)
+		return -ENOMEM;
+
+	rps_req[1] = SMP_REPORT_PHY_SATA;
+	rps_req[9] = phy_id;
+
+	res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
+			            rps_resp, RPS_RESP_SIZE);
+
+	kfree(rps_req);
+	return 0;
+}
+
+static void sas_ex_get_linkrate(struct domain_device *parent,
+				       struct domain_device *child,
+				       struct ex_phy *parent_phy)
+{
+	struct expander_device *parent_ex = &parent->ex_dev;
+	struct sas_port *port;
+	int i;
+
+	child->pathways = 0;
+
+	port = parent_phy->port;
+
+	for (i = 0; i < parent_ex->num_phys; i++) {
+		struct ex_phy *phy = &parent_ex->ex_phy[i];
+
+		if (phy->phy_state == PHY_VACANT ||
+		    phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if (SAS_ADDR(phy->attached_sas_addr) ==
+		    SAS_ADDR(child->sas_addr)) {
+
+			child->min_linkrate = min(parent->min_linkrate,
+						  phy->linkrate);
+			child->max_linkrate = max(parent->max_linkrate,
+						  phy->linkrate);
+			child->pathways++;
+			sas_port_add_phy(port, phy->phy);
+		}
+	}
+	child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
+	child->pathways = min(child->pathways, parent->pathways);
+}
+
+static struct domain_device *sas_ex_discover_end_dev(
+	struct domain_device *parent, int phy_id)
+{
+	struct expander_device *parent_ex = &parent->ex_dev;
+	struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
+	struct domain_device *child = NULL;
+	struct sas_rphy *rphy;
+	int res;
+
+	if (phy->attached_sata_host || phy->attached_sata_ps)
+		return NULL;
+
+	child = kzalloc(sizeof(*child), GFP_KERNEL);
+	if (!child)
+		return NULL;
+
+	child->parent = parent;
+	child->port   = parent->port;
+	child->iproto = phy->attached_iproto;
+	memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+	sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+	phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+	BUG_ON(!phy->port);
+	/* FIXME: better error handling*/
+	BUG_ON(sas_port_add(phy->port) != 0);
+	sas_ex_get_linkrate(parent, child, phy);
+
+	if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) {
+		child->dev_type = SATA_DEV;
+		if (phy->attached_tproto & SAS_PROTO_STP)
+			child->tproto = phy->attached_tproto;
+		if (phy->attached_sata_dev)
+			child->tproto |= SATA_DEV;
+		res = sas_get_report_phy_sata(parent, phy_id,
+					      &child->sata_dev.rps_resp);
+		if (res) {
+			SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
+				    "0x%x\n", SAS_ADDR(parent->sas_addr),
+				    phy_id, res);
+			kfree(child);
+			return NULL;
+		}
+		memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
+		       sizeof(struct dev_to_host_fis));
+		sas_init_dev(child);
+		res = sas_discover_sata(child);
+		if (res) {
+			SAS_DPRINTK("sas_discover_sata() for device %16llx at "
+				    "%016llx:0x%x returned 0x%x\n",
+				    SAS_ADDR(child->sas_addr),
+				    SAS_ADDR(parent->sas_addr), phy_id, res);
+			kfree(child);
+			return NULL;
+		}
+	} else if (phy->attached_tproto & SAS_PROTO_SSP) {
+		child->dev_type = SAS_END_DEV;
+		rphy = sas_end_device_alloc(phy->port);
+		/* FIXME: error handling */
+		BUG_ON(!rphy);
+		child->tproto = phy->attached_tproto;
+		sas_init_dev(child);
+
+		child->rphy = rphy;
+		sas_fill_in_rphy(child, rphy);
+
+		spin_lock(&parent->port->dev_list_lock);
+		list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+		spin_unlock(&parent->port->dev_list_lock);
+
+		res = sas_discover_end_dev(child);
+		if (res) {
+			SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
+				    "at %016llx:0x%x returned 0x%x\n",
+				    SAS_ADDR(child->sas_addr),
+				    SAS_ADDR(parent->sas_addr), phy_id, res);
+			/* FIXME: this kfrees list elements without removing them */
+			//kfree(child);
+			return NULL;
+		}
+	} else {
+		SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
+			    phy->attached_tproto, SAS_ADDR(parent->sas_addr),
+			    phy_id);
+	}
+
+	list_add_tail(&child->siblings, &parent_ex->children);
+	return child;
+}
+
+static struct domain_device *sas_ex_discover_expander(
+	struct domain_device *parent, int phy_id)
+{
+	struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
+	struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
+	struct domain_device *child = NULL;
+	struct sas_rphy *rphy;
+	struct sas_expander_device *edev;
+	struct asd_sas_port *port;
+	int res;
+
+	if (phy->routing_attr == DIRECT_ROUTING) {
+		SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
+			    "allowed\n",
+			    SAS_ADDR(parent->sas_addr), phy_id,
+			    SAS_ADDR(phy->attached_sas_addr),
+			    phy->attached_phy_id);
+		return NULL;
+	}
+	child = kzalloc(sizeof(*child), GFP_KERNEL);
+	if (!child)
+		return NULL;
+
+	phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+	/* FIXME: better error handling */
+	BUG_ON(sas_port_add(phy->port) != 0);
+
+
+	switch (phy->attached_dev_type) {
+	case EDGE_DEV:
+		rphy = sas_expander_alloc(phy->port,
+					  SAS_EDGE_EXPANDER_DEVICE);
+		break;
+	case FANOUT_DEV:
+		rphy = sas_expander_alloc(phy->port,
+					  SAS_FANOUT_EXPANDER_DEVICE);
+		break;
+	default:
+		rphy = NULL;	/* shut gcc up */
+		BUG();
+	}
+	port = parent->port;
+	child->rphy = rphy;
+	edev = rphy_to_expander_device(rphy);
+	child->dev_type = phy->attached_dev_type;
+	child->parent = parent;
+	child->port = port;
+	child->iproto = phy->attached_iproto;
+	child->tproto = phy->attached_tproto;
+	memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+	sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+	sas_ex_get_linkrate(parent, child, phy);
+	edev->level = parent_ex->level + 1;
+	parent->port->disc.max_level = max(parent->port->disc.max_level,
+					   edev->level);
+	sas_init_dev(child);
+	sas_fill_in_rphy(child, rphy);
+	sas_rphy_add(rphy);
+
+	spin_lock(&parent->port->dev_list_lock);
+	list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+	spin_unlock(&parent->port->dev_list_lock);
+
+	res = sas_discover_expander(child);
+	if (res) {
+		kfree(child);
+		return NULL;
+	}
+	list_add_tail(&child->siblings, &parent->ex_dev.children);
+	return child;
+}
+
+static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+	struct domain_device *child = NULL;
+	int res = 0;
+
+	/* Phy state */
+	if (ex_phy->linkrate == PHY_SPINUP_HOLD) {
+		if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET))
+			res = sas_ex_phy_discover(dev, phy_id);
+		if (res)
+			return res;
+	}
+
+	/* Parent and domain coherency */
+	if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+			     SAS_ADDR(dev->port->sas_addr))) {
+		sas_add_parent_port(dev, phy_id);
+		return 0;
+	}
+	if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+			    SAS_ADDR(dev->parent->sas_addr))) {
+		sas_add_parent_port(dev, phy_id);
+		if (ex_phy->routing_attr == TABLE_ROUTING)
+			sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
+		return 0;
+	}
+
+	if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
+		sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
+
+	if (ex_phy->attached_dev_type == NO_DEVICE) {
+		if (ex_phy->routing_attr == DIRECT_ROUTING) {
+			memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+			sas_configure_routing(dev, ex_phy->attached_sas_addr);
+		}
+		return 0;
+	} else if (ex_phy->linkrate == PHY_LINKRATE_UNKNOWN)
+		return 0;
+
+	if (ex_phy->attached_dev_type != SAS_END_DEV &&
+	    ex_phy->attached_dev_type != FANOUT_DEV &&
+	    ex_phy->attached_dev_type != EDGE_DEV) {
+		SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
+			    "phy 0x%x\n", ex_phy->attached_dev_type,
+			    SAS_ADDR(dev->sas_addr),
+			    phy_id);
+		return 0;
+	}
+
+	res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
+	if (res) {
+		SAS_DPRINTK("configure routing for dev %016llx "
+			    "reported 0x%x. Forgotten\n",
+			    SAS_ADDR(ex_phy->attached_sas_addr), res);
+		sas_disable_routing(dev, ex_phy->attached_sas_addr);
+		return res;
+	}
+
+	switch (ex_phy->attached_dev_type) {
+	case SAS_END_DEV:
+		child = sas_ex_discover_end_dev(dev, phy_id);
+		break;
+	case FANOUT_DEV:
+		if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
+			SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
+				    "attached to ex %016llx phy 0x%x\n",
+				    SAS_ADDR(ex_phy->attached_sas_addr),
+				    ex_phy->attached_phy_id,
+				    SAS_ADDR(dev->sas_addr),
+				    phy_id);
+			sas_ex_disable_phy(dev, phy_id);
+			break;
+		} else
+			memcpy(dev->port->disc.fanout_sas_addr,
+			       ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
+		/* fallthrough */
+	case EDGE_DEV:
+		child = sas_ex_discover_expander(dev, phy_id);
+		break;
+	default:
+		break;
+	}
+
+	if (child) {
+		int i;
+
+		for (i = 0; i < ex->num_phys; i++) {
+			if (ex->ex_phy[i].phy_state == PHY_VACANT ||
+			    ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
+				continue;
+
+			if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
+			    SAS_ADDR(child->sas_addr))
+				ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+		}
+	}
+
+	return res;
+}
+
+static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int i;
+
+	for (i = 0; i < ex->num_phys; i++) {
+		struct ex_phy *phy = &ex->ex_phy[i];
+
+		if (phy->phy_state == PHY_VACANT ||
+		    phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if ((phy->attached_dev_type == EDGE_DEV ||
+		     phy->attached_dev_type == FANOUT_DEV) &&
+		    phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+			memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
+
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int sas_check_level_subtractive_boundary(struct domain_device *dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct domain_device *child;
+	u8 sub_addr[8] = {0, };
+
+	list_for_each_entry(child, &ex->children, siblings) {
+		if (child->dev_type != EDGE_DEV &&
+		    child->dev_type != FANOUT_DEV)
+			continue;
+		if (sub_addr[0] == 0) {
+			sas_find_sub_addr(child, sub_addr);
+			continue;
+		} else {
+			u8 s2[8];
+
+			if (sas_find_sub_addr(child, s2) &&
+			    (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
+
+				SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
+					    "diverges from subtractive "
+					    "boundary %016llx\n",
+					    SAS_ADDR(dev->sas_addr),
+					    SAS_ADDR(child->sas_addr),
+					    SAS_ADDR(s2),
+					    SAS_ADDR(sub_addr));
+
+				sas_ex_disable_port(child, s2);
+			}
+		}
+	}
+	return 0;
+}
+/**
+ * sas_ex_discover_devices -- discover devices attached to this expander
+ * dev: pointer to the expander domain device
+ * single: if you want to do a single phy, else set to -1;
+ *
+ * Configure this expander for use with its devices and register the
+ * devices of this expander.
+ */
+static int sas_ex_discover_devices(struct domain_device *dev, int single)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int i = 0, end = ex->num_phys;
+	int res = 0;
+
+	if (0 <= single && single < end) {
+		i = single;
+		end = i+1;
+	}
+
+	for ( ; i < end; i++) {
+		struct ex_phy *ex_phy = &ex->ex_phy[i];
+
+		if (ex_phy->phy_state == PHY_VACANT ||
+		    ex_phy->phy_state == PHY_NOT_PRESENT ||
+		    ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
+			continue;
+
+		switch (ex_phy->linkrate) {
+		case PHY_DISABLED:
+		case PHY_RESET_PROBLEM:
+		case PHY_PORT_SELECTOR:
+			continue;
+		default:
+			res = sas_ex_discover_dev(dev, i);
+			if (res)
+				break;
+			continue;
+		}
+	}
+
+	if (!res)
+		sas_check_level_subtractive_boundary(dev);
+
+	return res;
+}
+
+static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int i;
+	u8  *sub_sas_addr = NULL;
+
+	if (dev->dev_type != EDGE_DEV)
+		return 0;
+
+	for (i = 0; i < ex->num_phys; i++) {
+		struct ex_phy *phy = &ex->ex_phy[i];
+
+		if (phy->phy_state == PHY_VACANT ||
+		    phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if ((phy->attached_dev_type == FANOUT_DEV ||
+		     phy->attached_dev_type == EDGE_DEV) &&
+		    phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+			if (!sub_sas_addr)
+				sub_sas_addr = &phy->attached_sas_addr[0];
+			else if (SAS_ADDR(sub_sas_addr) !=
+				 SAS_ADDR(phy->attached_sas_addr)) {
+
+				SAS_DPRINTK("ex %016llx phy 0x%x "
+					    "diverges(%016llx) on subtractive "
+					    "boundary(%016llx). Disabled\n",
+					    SAS_ADDR(dev->sas_addr), i,
+					    SAS_ADDR(phy->attached_sas_addr),
+					    SAS_ADDR(sub_sas_addr));
+				sas_ex_disable_phy(dev, i);
+			}
+		}
+	}
+	return 0;
+}
+
+static void sas_print_parent_topology_bug(struct domain_device *child,
+						 struct ex_phy *parent_phy,
+						 struct ex_phy *child_phy)
+{
+	static const char ra_char[] = {
+		[DIRECT_ROUTING] = 'D',
+		[SUBTRACTIVE_ROUTING] = 'S',
+		[TABLE_ROUTING] = 'T',
+	};
+	static const char *ex_type[] = {
+		[EDGE_DEV] = "edge",
+		[FANOUT_DEV] = "fanout",
+	};
+	struct domain_device *parent = child->parent;
+
+	sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
+		   "has %c:%c routing link!\n",
+
+		   ex_type[parent->dev_type],
+		   SAS_ADDR(parent->sas_addr),
+		   parent_phy->phy_id,
+
+		   ex_type[child->dev_type],
+		   SAS_ADDR(child->sas_addr),
+		   child_phy->phy_id,
+
+		   ra_char[parent_phy->routing_attr],
+		   ra_char[child_phy->routing_attr]);
+}
+
+static int sas_check_eeds(struct domain_device *child,
+				 struct ex_phy *parent_phy,
+				 struct ex_phy *child_phy)
+{
+	int res = 0;
+	struct domain_device *parent = child->parent;
+
+	if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
+		res = -ENODEV;
+		SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
+			    "phy S:0x%x, while there is a fanout ex %016llx\n",
+			    SAS_ADDR(parent->sas_addr),
+			    parent_phy->phy_id,
+			    SAS_ADDR(child->sas_addr),
+			    child_phy->phy_id,
+			    SAS_ADDR(parent->port->disc.fanout_sas_addr));
+	} else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
+		memcpy(parent->port->disc.eeds_a, parent->sas_addr,
+		       SAS_ADDR_SIZE);
+		memcpy(parent->port->disc.eeds_b, child->sas_addr,
+		       SAS_ADDR_SIZE);
+	} else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
+		    SAS_ADDR(parent->sas_addr)) ||
+		   (SAS_ADDR(parent->port->disc.eeds_a) ==
+		    SAS_ADDR(child->sas_addr)))
+		   &&
+		   ((SAS_ADDR(parent->port->disc.eeds_b) ==
+		     SAS_ADDR(parent->sas_addr)) ||
+		    (SAS_ADDR(parent->port->disc.eeds_b) ==
+		     SAS_ADDR(child->sas_addr))))
+		;
+	else {
+		res = -ENODEV;
+		SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
+			    "phy 0x%x link forms a third EEDS!\n",
+			    SAS_ADDR(parent->sas_addr),
+			    parent_phy->phy_id,
+			    SAS_ADDR(child->sas_addr),
+			    child_phy->phy_id);
+	}
+
+	return res;
+}
+
+/* Here we spill over 80 columns.  It is intentional.
+ */
+static int sas_check_parent_topology(struct domain_device *child)
+{
+	struct expander_device *child_ex = &child->ex_dev;
+	struct expander_device *parent_ex;
+	int i;
+	int res = 0;
+
+	if (!child->parent)
+		return 0;
+
+	if (child->parent->dev_type != EDGE_DEV &&
+	    child->parent->dev_type != FANOUT_DEV)
+		return 0;
+
+	parent_ex = &child->parent->ex_dev;
+
+	for (i = 0; i < parent_ex->num_phys; i++) {
+		struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
+		struct ex_phy *child_phy;
+
+		if (parent_phy->phy_state == PHY_VACANT ||
+		    parent_phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
+			continue;
+
+		child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
+
+		switch (child->parent->dev_type) {
+		case EDGE_DEV:
+			if (child->dev_type == FANOUT_DEV) {
+				if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
+				    child_phy->routing_attr != TABLE_ROUTING) {
+					sas_print_parent_topology_bug(child, parent_phy, child_phy);
+					res = -ENODEV;
+				}
+			} else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+				if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+					res = sas_check_eeds(child, parent_phy, child_phy);
+				} else if (child_phy->routing_attr != TABLE_ROUTING) {
+					sas_print_parent_topology_bug(child, parent_phy, child_phy);
+					res = -ENODEV;
+				}
+			} else if (parent_phy->routing_attr == TABLE_ROUTING &&
+				   child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+				sas_print_parent_topology_bug(child, parent_phy, child_phy);
+				res = -ENODEV;
+			}
+			break;
+		case FANOUT_DEV:
+			if (parent_phy->routing_attr != TABLE_ROUTING ||
+			    child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+				sas_print_parent_topology_bug(child, parent_phy, child_phy);
+				res = -ENODEV;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	return res;
+}
+
+#define RRI_REQ_SIZE  16
+#define RRI_RESP_SIZE 44
+
+static int sas_configure_present(struct domain_device *dev, int phy_id,
+				 u8 *sas_addr, int *index, int *present)
+{
+	int i, res = 0;
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+	u8 *rri_req;
+	u8 *rri_resp;
+
+	*present = 0;
+	*index = 0;
+
+	rri_req = alloc_smp_req(RRI_REQ_SIZE);
+	if (!rri_req)
+		return -ENOMEM;
+
+	rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
+	if (!rri_resp) {
+		kfree(rri_req);
+		return -ENOMEM;
+	}
+
+	rri_req[1] = SMP_REPORT_ROUTE_INFO;
+	rri_req[9] = phy_id;
+
+	for (i = 0; i < ex->max_route_indexes ; i++) {
+		*(__be16 *)(rri_req+6) = cpu_to_be16(i);
+		res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
+				       RRI_RESP_SIZE);
+		if (res)
+			goto out;
+		res = rri_resp[2];
+		if (res == SMP_RESP_NO_INDEX) {
+			SAS_DPRINTK("overflow of indexes: dev %016llx "
+				    "phy 0x%x index 0x%x\n",
+				    SAS_ADDR(dev->sas_addr), phy_id, i);
+			goto out;
+		} else if (res != SMP_RESP_FUNC_ACC) {
+			SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
+				    "result 0x%x\n", __FUNCTION__,
+				    SAS_ADDR(dev->sas_addr), phy_id, i, res);
+			goto out;
+		}
+		if (SAS_ADDR(sas_addr) != 0) {
+			if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
+				*index = i;
+				if ((rri_resp[12] & 0x80) == 0x80)
+					*present = 0;
+				else
+					*present = 1;
+				goto out;
+			} else if (SAS_ADDR(rri_resp+16) == 0) {
+				*index = i;
+				*present = 0;
+				goto out;
+			}
+		} else if (SAS_ADDR(rri_resp+16) == 0 &&
+			   phy->last_da_index < i) {
+			phy->last_da_index = i;
+			*index = i;
+			*present = 0;
+			goto out;
+		}
+	}
+	res = -1;
+out:
+	kfree(rri_req);
+	kfree(rri_resp);
+	return res;
+}
+
+#define CRI_REQ_SIZE  44
+#define CRI_RESP_SIZE  8
+
+static int sas_configure_set(struct domain_device *dev, int phy_id,
+			     u8 *sas_addr, int index, int include)
+{
+	int res;
+	u8 *cri_req;
+	u8 *cri_resp;
+
+	cri_req = alloc_smp_req(CRI_REQ_SIZE);
+	if (!cri_req)
+		return -ENOMEM;
+
+	cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
+	if (!cri_resp) {
+		kfree(cri_req);
+		return -ENOMEM;
+	}
+
+	cri_req[1] = SMP_CONF_ROUTE_INFO;
+	*(__be16 *)(cri_req+6) = cpu_to_be16(index);
+	cri_req[9] = phy_id;
+	if (SAS_ADDR(sas_addr) == 0 || !include)
+		cri_req[12] |= 0x80;
+	memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
+
+	res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
+			       CRI_RESP_SIZE);
+	if (res)
+		goto out;
+	res = cri_resp[2];
+	if (res == SMP_RESP_NO_INDEX) {
+		SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
+			    "index 0x%x\n",
+			    SAS_ADDR(dev->sas_addr), phy_id, index);
+	}
+out:
+	kfree(cri_req);
+	kfree(cri_resp);
+	return res;
+}
+
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+				    u8 *sas_addr, int include)
+{
+	int index;
+	int present;
+	int res;
+
+	res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
+	if (res)
+		return res;
+	if (include ^ present)
+		return sas_configure_set(dev, phy_id, sas_addr, index,include);
+
+	return res;
+}
+
+/**
+ * sas_configure_parent -- configure routing table of parent
+ * parent: parent expander
+ * child: child expander
+ * sas_addr: SAS port identifier of device directly attached to child
+ */
+static int sas_configure_parent(struct domain_device *parent,
+				struct domain_device *child,
+				u8 *sas_addr, int include)
+{
+	struct expander_device *ex_parent = &parent->ex_dev;
+	int res = 0;
+	int i;
+
+	if (parent->parent) {
+		res = sas_configure_parent(parent->parent, parent, sas_addr,
+					   include);
+		if (res)
+			return res;
+	}
+
+	if (ex_parent->conf_route_table == 0) {
+		SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
+			    SAS_ADDR(parent->sas_addr));
+		return 0;
+	}
+
+	for (i = 0; i < ex_parent->num_phys; i++) {
+		struct ex_phy *phy = &ex_parent->ex_phy[i];
+
+		if ((phy->routing_attr == TABLE_ROUTING) &&
+		    (SAS_ADDR(phy->attached_sas_addr) ==
+		     SAS_ADDR(child->sas_addr))) {
+			res = sas_configure_phy(parent, i, sas_addr, include);
+			if (res)
+				return res;
+		}
+	}
+
+	return res;
+}
+
+/**
+ * sas_configure_routing -- configure routing
+ * dev: expander device
+ * sas_addr: port identifier of device directly attached to the expander device
+ */
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
+{
+	if (dev->parent)
+		return sas_configure_parent(dev->parent, dev, sas_addr, 1);
+	return 0;
+}
+
+static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr)
+{
+	if (dev->parent)
+		return sas_configure_parent(dev->parent, dev, sas_addr, 0);
+	return 0;
+}
+
+#if 0
+#define SMP_BIN_ATTR_NAME "smp_portal"
+
+static void sas_ex_smp_hook(struct domain_device *dev)
+{
+	struct expander_device *ex_dev = &dev->ex_dev;
+	struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr;
+
+	memset(bin_attr, 0, sizeof(*bin_attr));
+
+	bin_attr->attr.name = SMP_BIN_ATTR_NAME;
+	bin_attr->attr.owner = THIS_MODULE;
+	bin_attr->attr.mode = 0600;
+
+	bin_attr->size = 0;
+	bin_attr->private = NULL;
+	bin_attr->read = smp_portal_read;
+	bin_attr->write= smp_portal_write;
+	bin_attr->mmap = NULL;
+
+	ex_dev->smp_portal_pid = -1;
+	init_MUTEX(&ex_dev->smp_sema);
+}
+#endif
+
+/**
+ * sas_discover_expander -- expander discovery
+ * @ex: pointer to expander domain device
+ *
+ * See comment in sas_discover_sata().
+ */
+static int sas_discover_expander(struct domain_device *dev)
+{
+	int res;
+
+	res = sas_notify_lldd_dev_found(dev);
+	if (res)
+		return res;
+
+	res = sas_ex_general(dev);
+	if (res)
+		goto out_err;
+	res = sas_ex_manuf_info(dev);
+	if (res)
+		goto out_err;
+
+	res = sas_expander_discover(dev);
+	if (res) {
+		SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
+			    SAS_ADDR(dev->sas_addr), res);
+		goto out_err;
+	}
+
+	sas_check_ex_subtractive_boundary(dev);
+	res = sas_check_parent_topology(dev);
+	if (res)
+		goto out_err;
+	return 0;
+out_err:
+	sas_notify_lldd_dev_gone(dev);
+	return res;
+}
+
+static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
+{
+	int res = 0;
+	struct domain_device *dev;
+
+	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+		if (dev->dev_type == EDGE_DEV ||
+		    dev->dev_type == FANOUT_DEV) {
+			struct sas_expander_device *ex =
+				rphy_to_expander_device(dev->rphy);
+
+			if (level == ex->level)
+				res = sas_ex_discover_devices(dev, -1);
+			else if (level > 0)
+				res = sas_ex_discover_devices(port->port_dev, -1);
+
+		}
+	}
+
+	return res;
+}
+
+static int sas_ex_bfs_disc(struct asd_sas_port *port)
+{
+	int res;
+	int level;
+
+	do {
+		level = port->disc.max_level;
+		res = sas_ex_level_discovery(port, level);
+		mb();
+	} while (level < port->disc.max_level);
+
+	return res;
+}
+
+int sas_discover_root_expander(struct domain_device *dev)
+{
+	int res;
+	struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+
+	sas_rphy_add(dev->rphy);
+
+	ex->level = dev->port->disc.max_level; /* 0 */
+	res = sas_discover_expander(dev);
+	if (!res)
+		sas_ex_bfs_disc(dev->port);
+
+	return res;
+}
+
+/* ---------- Domain revalidation ---------- */
+
+static int sas_get_phy_discover(struct domain_device *dev,
+				int phy_id, struct smp_resp *disc_resp)
+{
+	int res;
+	u8 *disc_req;
+
+	disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+	if (!disc_req)
+		return -ENOMEM;
+
+	disc_req[1] = SMP_DISCOVER;
+	disc_req[9] = phy_id;
+
+	res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+			       disc_resp, DISCOVER_RESP_SIZE);
+	if (res)
+		goto out;
+	else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
+		res = disc_resp->result;
+		goto out;
+	}
+out:
+	kfree(disc_req);
+	return res;
+}
+
+static int sas_get_phy_change_count(struct domain_device *dev,
+				    int phy_id, int *pcc)
+{
+	int res;
+	struct smp_resp *disc_resp;
+
+	disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+	if (!disc_resp)
+		return -ENOMEM;
+
+	res = sas_get_phy_discover(dev, phy_id, disc_resp);
+	if (!res)
+		*pcc = disc_resp->disc.change_count;
+
+	kfree(disc_resp);
+	return res;
+}
+
+static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
+					 int phy_id, u8 *attached_sas_addr)
+{
+	int res;
+	struct smp_resp *disc_resp;
+	struct discover_resp *dr;
+
+	disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+	if (!disc_resp)
+		return -ENOMEM;
+	dr = &disc_resp->disc;
+
+	res = sas_get_phy_discover(dev, phy_id, disc_resp);
+	if (!res) {
+		memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8);
+		if (dr->attached_dev_type == 0)
+			memset(attached_sas_addr, 0, 8);
+	}
+	kfree(disc_resp);
+	return res;
+}
+
+static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
+			      int from_phy)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int res = 0;
+	int i;
+
+	for (i = from_phy; i < ex->num_phys; i++) {
+		int phy_change_count = 0;
+
+		res = sas_get_phy_change_count(dev, i, &phy_change_count);
+		if (res)
+			goto out;
+		else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
+			ex->ex_phy[i].phy_change_count = phy_change_count;
+			*phy_id = i;
+			return 0;
+		}
+	}
+out:
+	return res;
+}
+
+static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
+{
+	int res;
+	u8  *rg_req;
+	struct smp_resp  *rg_resp;
+
+	rg_req = alloc_smp_req(RG_REQ_SIZE);
+	if (!rg_req)
+		return -ENOMEM;
+
+	rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+	if (!rg_resp) {
+		kfree(rg_req);
+		return -ENOMEM;
+	}
+
+	rg_req[1] = SMP_REPORT_GENERAL;
+
+	res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+			       RG_RESP_SIZE);
+	if (res)
+		goto out;
+	if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+		res = rg_resp->result;
+		goto out;
+	}
+
+	*ecc = be16_to_cpu(rg_resp->rg.change_count);
+out:
+	kfree(rg_resp);
+	kfree(rg_req);
+	return res;
+}
+
+static int sas_find_bcast_dev(struct domain_device *dev,
+			      struct domain_device **src_dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int ex_change_count = -1;
+	int res;
+
+	res = sas_get_ex_change_count(dev, &ex_change_count);
+	if (res)
+		goto out;
+	if (ex_change_count != -1 &&
+	    ex_change_count != ex->ex_change_count) {
+		*src_dev = dev;
+		ex->ex_change_count = ex_change_count;
+	} else {
+		struct domain_device *ch;
+
+		list_for_each_entry(ch, &ex->children, siblings) {
+			if (ch->dev_type == EDGE_DEV ||
+			    ch->dev_type == FANOUT_DEV) {
+				res = sas_find_bcast_dev(ch, src_dev);
+				if (src_dev)
+					return res;
+			}
+		}
+	}
+out:
+	return res;
+}
+
+static void sas_unregister_ex_tree(struct domain_device *dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct domain_device *child, *n;
+
+	list_for_each_entry_safe(child, n, &ex->children, siblings) {
+		if (child->dev_type == EDGE_DEV ||
+		    child->dev_type == FANOUT_DEV)
+			sas_unregister_ex_tree(child);
+		else
+			sas_unregister_dev(child);
+	}
+	sas_unregister_dev(dev);
+}
+
+static void sas_unregister_devs_sas_addr(struct domain_device *parent,
+					 int phy_id)
+{
+	struct expander_device *ex_dev = &parent->ex_dev;
+	struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
+	struct domain_device *child, *n;
+
+	list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
+		if (SAS_ADDR(child->sas_addr) ==
+		    SAS_ADDR(phy->attached_sas_addr)) {
+			if (child->dev_type == EDGE_DEV ||
+			    child->dev_type == FANOUT_DEV)
+				sas_unregister_ex_tree(child);
+			else
+				sas_unregister_dev(child);
+			break;
+		}
+	}
+	sas_disable_routing(parent, phy->attached_sas_addr);
+	memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+	sas_port_delete_phy(phy->port, phy->phy);
+	if (phy->port->num_phys == 0)
+		sas_port_delete(phy->port);
+	phy->port = NULL;
+}
+
+static int sas_discover_bfs_by_root_level(struct domain_device *root,
+					  const int level)
+{
+	struct expander_device *ex_root = &root->ex_dev;
+	struct domain_device *child;
+	int res = 0;
+
+	list_for_each_entry(child, &ex_root->children, siblings) {
+		if (child->dev_type == EDGE_DEV ||
+		    child->dev_type == FANOUT_DEV) {
+			struct sas_expander_device *ex =
+				rphy_to_expander_device(child->rphy);
+
+			if (level > ex->level)
+				res = sas_discover_bfs_by_root_level(child,
+								     level);
+			else if (level == ex->level)
+				res = sas_ex_discover_devices(child, -1);
+		}
+	}
+	return res;
+}
+
+static int sas_discover_bfs_by_root(struct domain_device *dev)
+{
+	int res;
+	struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+	int level = ex->level+1;
+
+	res = sas_ex_discover_devices(dev, -1);
+	if (res)
+		goto out;
+	do {
+		res = sas_discover_bfs_by_root_level(dev, level);
+		mb();
+		level += 1;
+	} while (level <= dev->port->disc.max_level);
+out:
+	return res;
+}
+
+static int sas_discover_new(struct domain_device *dev, int phy_id)
+{
+	struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
+	struct domain_device *child;
+	int res;
+
+	SAS_DPRINTK("ex %016llx phy%d new device attached\n",
+		    SAS_ADDR(dev->sas_addr), phy_id);
+	res = sas_ex_phy_discover(dev, phy_id);
+	if (res)
+		goto out;
+	res = sas_ex_discover_devices(dev, phy_id);
+	if (res)
+		goto out;
+	list_for_each_entry(child, &dev->ex_dev.children, siblings) {
+		if (SAS_ADDR(child->sas_addr) ==
+		    SAS_ADDR(ex_phy->attached_sas_addr)) {
+			if (child->dev_type == EDGE_DEV ||
+			    child->dev_type == FANOUT_DEV)
+				res = sas_discover_bfs_by_root(child);
+			break;
+		}
+	}
+out:
+	return res;
+}
+
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+	u8 attached_sas_addr[8];
+	int res;
+
+	res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr);
+	switch (res) {
+	case SMP_RESP_NO_PHY:
+		phy->phy_state = PHY_NOT_PRESENT;
+		sas_unregister_devs_sas_addr(dev, phy_id);
+		goto out; break;
+	case SMP_RESP_PHY_VACANT:
+		phy->phy_state = PHY_VACANT;
+		sas_unregister_devs_sas_addr(dev, phy_id);
+		goto out; break;
+	case SMP_RESP_FUNC_ACC:
+		break;
+	}
+
+	if (SAS_ADDR(attached_sas_addr) == 0) {
+		phy->phy_state = PHY_EMPTY;
+		sas_unregister_devs_sas_addr(dev, phy_id);
+	} else if (SAS_ADDR(attached_sas_addr) ==
+		   SAS_ADDR(phy->attached_sas_addr)) {
+		SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
+			    SAS_ADDR(dev->sas_addr), phy_id);
+	} else
+		res = sas_discover_new(dev, phy_id);
+out:
+	return res;
+}
+
+static int sas_rediscover(struct domain_device *dev, const int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
+	int res = 0;
+	int i;
+
+	SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
+		    SAS_ADDR(dev->sas_addr), phy_id);
+
+	if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
+		for (i = 0; i < ex->num_phys; i++) {
+			struct ex_phy *phy = &ex->ex_phy[i];
+
+			if (i == phy_id)
+				continue;
+			if (SAS_ADDR(phy->attached_sas_addr) ==
+			    SAS_ADDR(changed_phy->attached_sas_addr)) {
+				SAS_DPRINTK("phy%d part of wide port with "
+					    "phy%d\n", phy_id, i);
+				goto out;
+			}
+		}
+		res = sas_rediscover_dev(dev, phy_id);
+	} else
+		res = sas_discover_new(dev, phy_id);
+out:
+	return res;
+}
+
+/**
+ * sas_revalidate_domain -- revalidate the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered.  Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+int sas_ex_revalidate_domain(struct domain_device *port_dev)
+{
+	int res;
+	struct domain_device *dev = NULL;
+
+	res = sas_find_bcast_dev(port_dev, &dev);
+	if (res)
+		goto out;
+	if (dev) {
+		struct expander_device *ex = &dev->ex_dev;
+		int i = 0, phy_id;
+
+		do {
+			phy_id = -1;
+			res = sas_find_bcast_phy(dev, &phy_id, i);
+			if (phy_id == -1)
+				break;
+			res = sas_rediscover(dev, phy_id);
+			i = phy_id + 1;
+		} while (i < ex->num_phys);
+	}
+out:
+	return res;
+}
+
+#if 0
+/* ---------- SMP portal ---------- */
+
+static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs,
+				size_t size)
+{
+	struct domain_device *dev = to_dom_device(kobj);
+	struct expander_device *ex = &dev->ex_dev;
+
+	if (offs != 0)
+		return -EFBIG;
+	else if (size == 0)
+		return 0;
+
+	down_interruptible(&ex->smp_sema);
+	if (ex->smp_req)
+		kfree(ex->smp_req);
+	ex->smp_req = kzalloc(size, GFP_USER);
+	if (!ex->smp_req) {
+		up(&ex->smp_sema);
+		return -ENOMEM;
+	}
+	memcpy(ex->smp_req, buf, size);
+	ex->smp_req_size = size;
+	ex->smp_portal_pid = current->pid;
+	up(&ex->smp_sema);
+
+	return size;
+}
+
+static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs,
+			       size_t size)
+{
+	struct domain_device *dev = to_dom_device(kobj);
+	struct expander_device *ex = &dev->ex_dev;
+	u8 *smp_resp;
+	int res = -EINVAL;
+
+	/* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact
+	 *  it should be 0.
+	 */
+
+	down_interruptible(&ex->smp_sema);
+	if (!ex->smp_req || ex->smp_portal_pid != current->pid)
+		goto out;
+
+	res = 0;
+	if (size == 0)
+		goto out;
+
+	res = -ENOMEM;
+	smp_resp = alloc_smp_resp(size);
+	if (!smp_resp)
+		goto out;
+	res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size,
+			       smp_resp, size);
+	if (!res) {
+		memcpy(buf, smp_resp, size);
+		res = size;
+	}
+
+	kfree(smp_resp);
+out:
+	kfree(ex->smp_req);
+	ex->smp_req = NULL;
+	ex->smp_req_size = 0;
+	ex->smp_portal_pid = -1;
+	up(&ex->smp_sema);
+	return res;
+}
+#endif
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
new file mode 100644
index 000000000000..b961664b8106
--- /dev/null
+++ b/drivers/scsi/libsas/sas_init.c
@@ -0,0 +1,227 @@
+/*
+ * Serial Attached SCSI (SAS) Transport Layer initialization
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+
+#include "sas_internal.h"
+
+#include "../scsi_sas_internal.h"
+
+kmem_cache_t *sas_task_cache;
+
+/*------------ SAS addr hash -----------*/
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
+{
+        const u32 poly = 0x00DB2777;
+        u32     r = 0;
+        int     i;
+
+        for (i = 0; i < 8; i++) {
+                int b;
+                for (b = 7; b >= 0; b--) {
+                        r <<= 1;
+                        if ((1 << b) & sas_addr[i]) {
+                                if (!(r & 0x01000000))
+                                        r ^= poly;
+                        } else if (r & 0x01000000)
+                                r ^= poly;
+                }
+        }
+
+        hashed[0] = (r >> 16) & 0xFF;
+        hashed[1] = (r >> 8) & 0xFF ;
+        hashed[2] = r & 0xFF;
+}
+
+
+/* ---------- HA events ---------- */
+
+void sas_hae_reset(void *data)
+{
+	struct sas_ha_struct *ha = data;
+
+	sas_begin_event(HAE_RESET, &ha->event_lock,
+			&ha->pending);
+}
+
+int sas_register_ha(struct sas_ha_struct *sas_ha)
+{
+	int error = 0;
+
+	spin_lock_init(&sas_ha->phy_port_lock);
+	sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr);
+
+	if (sas_ha->lldd_queue_size == 0)
+		sas_ha->lldd_queue_size = 1;
+	else if (sas_ha->lldd_queue_size == -1)
+		sas_ha->lldd_queue_size = 128; /* Sanity */
+
+	error = sas_register_phys(sas_ha);
+	if (error) {
+		printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
+		return error;
+	}
+
+	error = sas_register_ports(sas_ha);
+	if (error) {
+		printk(KERN_NOTICE "couldn't register sas ports:%d\n", error);
+		goto Undo_phys;
+	}
+
+	error = sas_init_events(sas_ha);
+	if (error) {
+		printk(KERN_NOTICE "couldn't start event thread:%d\n", error);
+		goto Undo_ports;
+	}
+
+	if (sas_ha->lldd_max_execute_num > 1) {
+		error = sas_init_queue(sas_ha);
+		if (error) {
+			printk(KERN_NOTICE "couldn't start queue thread:%d, "
+			       "running in direct mode\n", error);
+			sas_ha->lldd_max_execute_num = 1;
+		}
+	}
+
+	return 0;
+
+Undo_ports:
+	sas_unregister_ports(sas_ha);
+Undo_phys:
+
+	return error;
+}
+
+int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+{
+	if (sas_ha->lldd_max_execute_num > 1) {
+		sas_shutdown_queue(sas_ha);
+	}
+
+	sas_unregister_ports(sas_ha);
+
+	return 0;
+}
+
+static int sas_get_linkerrors(struct sas_phy *phy)
+{
+	if (scsi_is_sas_phy_local(phy))
+		/* FIXME: we have no local phy stats
+		 * gathering at this time */
+		return -EINVAL;
+
+	return sas_smp_get_phy_events(phy);
+}
+
+static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+	int ret;
+	enum phy_func reset_type;
+
+	if (hard_reset)
+		reset_type = PHY_FUNC_HARD_RESET;
+	else
+		reset_type = PHY_FUNC_LINK_RESET;
+
+	if (scsi_is_sas_phy_local(phy)) {
+		struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+		struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+		struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+		struct sas_internal *i =
+			to_sas_internal(sas_ha->core.shost->transportt);
+
+		ret = i->dft->lldd_control_phy(asd_phy, reset_type);
+	} else {
+		struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+		struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+		ret = sas_smp_phy_control(ddev, phy->number, reset_type);
+	}
+	return ret;
+}
+
+static struct sas_function_template sft = {
+	.phy_reset = sas_phy_reset,
+	.get_linkerrors = sas_get_linkerrors,
+};
+
+struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *dft)
+{
+	struct scsi_transport_template *stt = sas_attach_transport(&sft);
+	struct sas_internal *i;
+
+	if (!stt)
+		return stt;
+
+	i = to_sas_internal(stt);
+	i->dft = dft;
+	stt->create_work_queue = 1;
+	stt->eh_timed_out = sas_scsi_timed_out;
+	stt->eh_strategy_handler = sas_scsi_recover_host;
+
+	return stt;
+}
+EXPORT_SYMBOL_GPL(sas_domain_attach_transport);
+
+
+void sas_domain_release_transport(struct scsi_transport_template *stt)
+{
+	sas_release_transport(stt);
+}
+EXPORT_SYMBOL_GPL(sas_domain_release_transport);
+
+/* ---------- SAS Class register/unregister ---------- */
+
+static int __init sas_class_init(void)
+{
+	sas_task_cache = kmem_cache_create("sas_task", sizeof(struct sas_task),
+					   0, SLAB_HWCACHE_ALIGN, NULL, NULL);
+	if (!sas_task_cache)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __exit sas_class_exit(void)
+{
+	kmem_cache_destroy(sas_task_cache);
+}
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION("SAS Transport Layer");
+MODULE_LICENSE("GPL v2");
+
+module_init(sas_class_init);
+module_exit(sas_class_exit);
+
+EXPORT_SYMBOL_GPL(sas_register_ha);
+EXPORT_SYMBOL_GPL(sas_unregister_ha);
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
new file mode 100644
index 000000000000..89c397680846
--- /dev/null
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -0,0 +1,146 @@
+/*
+ * Serial Attached SCSI (SAS) class internal header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_INTERNAL_H_
+#define _SAS_INTERNAL_H_
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/libsas.h>
+
+#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+
+#ifdef SAS_DEBUG
+#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+#else
+#define SAS_DPRINTK(fmt, ...)
+#endif
+
+void sas_scsi_recover_host(struct Scsi_Host *shost);
+
+int sas_show_class(enum sas_class class, char *buf);
+int sas_show_proto(enum sas_proto proto, char *buf);
+int sas_show_linkrate(enum sas_phy_linkrate linkrate, char *buf);
+int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
+
+int  sas_register_phys(struct sas_ha_struct *sas_ha);
+void sas_unregister_phys(struct sas_ha_struct *sas_ha);
+
+int  sas_register_ports(struct sas_ha_struct *sas_ha);
+void sas_unregister_ports(struct sas_ha_struct *sas_ha);
+
+enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
+
+int  sas_init_queue(struct sas_ha_struct *sas_ha);
+int  sas_init_events(struct sas_ha_struct *sas_ha);
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
+
+void sas_deform_port(struct asd_sas_phy *phy);
+
+void sas_porte_bytes_dmaed(void *);
+void sas_porte_broadcast_rcvd(void *);
+void sas_porte_link_reset_err(void *);
+void sas_porte_timer_event(void *);
+void sas_porte_hard_reset(void *);
+
+int sas_notify_lldd_dev_found(struct domain_device *);
+void sas_notify_lldd_dev_gone(struct domain_device *);
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+			enum phy_func phy_func);
+int sas_smp_get_phy_events(struct sas_phy *phy);
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
+
+void sas_hae_reset(void *);
+
+static inline void sas_queue_event(int event, spinlock_t *lock,
+				   unsigned long *pending,
+				   struct work_struct *work,
+				   struct Scsi_Host *shost)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
+	if (test_bit(event, pending)) {
+		spin_unlock_irqrestore(lock, flags);
+		return;
+	}
+	__set_bit(event, pending);
+	spin_unlock_irqrestore(lock, flags);
+	scsi_queue_work(shost, work);
+}
+
+static inline void sas_begin_event(int event, spinlock_t *lock,
+				   unsigned long *pending)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
+	__clear_bit(event, pending);
+	spin_unlock_irqrestore(lock, flags);
+}
+
+static inline void sas_fill_in_rphy(struct domain_device *dev,
+				    struct sas_rphy *rphy)
+{
+	rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
+	rphy->identify.initiator_port_protocols = dev->iproto;
+	rphy->identify.target_port_protocols = dev->tproto;
+	switch (dev->dev_type) {
+	case SATA_DEV:
+		/* FIXME: need sata device type */
+	case SAS_END_DEV:
+		rphy->identify.device_type = SAS_END_DEVICE;
+		break;
+	case EDGE_DEV:
+		rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
+		break;
+	case FANOUT_DEV:
+		rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
+		break;
+	default:
+		rphy->identify.device_type = SAS_PHY_UNUSED;
+		break;
+	}
+}
+
+static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+
+	if (!ex->parent_port) {
+		ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
+		/* FIXME: error handling */
+		BUG_ON(!ex->parent_port);
+		BUG_ON(sas_port_add(ex->parent_port));
+		sas_port_mark_backlink(ex->parent_port);
+	}
+	sas_port_add_phy(ex->parent_port, ex_phy->phy);
+}
+
+#endif /* _SAS_INTERNAL_H_ */
diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c
new file mode 100644
index 000000000000..024ab00e70d2
--- /dev/null
+++ b/drivers/scsi/libsas/sas_phy.c
@@ -0,0 +1,157 @@
+/*
+ * Serial Attached SCSI (SAS) Phy class
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include "sas_internal.h"
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Phy events ---------- */
+
+static void sas_phye_loss_of_signal(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock,
+			&phy->phy_events_pending);
+	phy->error = 0;
+	sas_deform_port(phy);
+}
+
+static void sas_phye_oob_done(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PHYE_OOB_DONE, &phy->ha->event_lock,
+			&phy->phy_events_pending);
+	phy->error = 0;
+}
+
+static void sas_phye_oob_error(void *data)
+{
+	struct asd_sas_phy *phy = data;
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct asd_sas_port *port = phy->port;
+	struct sas_internal *i =
+		to_sas_internal(sas_ha->core.shost->transportt);
+
+	sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock,
+			&phy->phy_events_pending);
+
+	sas_deform_port(phy);
+
+	if (!port && phy->enabled && i->dft->lldd_control_phy) {
+		phy->error++;
+		switch (phy->error) {
+		case 1:
+		case 2:
+			i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET);
+			break;
+		case 3:
+		default:
+			phy->error = 0;
+			phy->enabled = 0;
+			i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE);
+			break;
+		}
+	}
+}
+
+static void sas_phye_spinup_hold(void *data)
+{
+	struct asd_sas_phy *phy = data;
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct sas_internal *i =
+		to_sas_internal(sas_ha->core.shost->transportt);
+
+	sas_begin_event(PHYE_SPINUP_HOLD, &phy->ha->event_lock,
+			&phy->phy_events_pending);
+
+	phy->error = 0;
+	i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD);
+}
+
+/* ---------- Phy class registration ---------- */
+
+int sas_register_phys(struct sas_ha_struct *sas_ha)
+{
+	int i;
+
+	static void (*sas_phy_event_fns[PHY_NUM_EVENTS])(void *) = {
+		[PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
+		[PHYE_OOB_DONE] = sas_phye_oob_done,
+		[PHYE_OOB_ERROR] = sas_phye_oob_error,
+		[PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
+	};
+
+	static void (*sas_port_event_fns[PORT_NUM_EVENTS])(void *) = {
+		[PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
+		[PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
+		[PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
+		[PORTE_TIMER_EVENT] = sas_porte_timer_event,
+		[PORTE_HARD_RESET] = sas_porte_hard_reset,
+	};
+
+	/* Now register the phys. */
+	for (i = 0; i < sas_ha->num_phys; i++) {
+		int k;
+		struct asd_sas_phy *phy = sas_ha->sas_phy[i];
+
+		phy->error = 0;
+		INIT_LIST_HEAD(&phy->port_phy_el);
+		for (k = 0; k < PORT_NUM_EVENTS; k++)
+			INIT_WORK(&phy->port_events[k], sas_port_event_fns[k],
+				  phy);
+
+		for (k = 0; k < PHY_NUM_EVENTS; k++)
+			INIT_WORK(&phy->phy_events[k], sas_phy_event_fns[k],
+				  phy);
+		phy->port = NULL;
+		phy->ha = sas_ha;
+		spin_lock_init(&phy->frame_rcvd_lock);
+		spin_lock_init(&phy->sas_prim_lock);
+		phy->frame_rcvd_size = 0;
+
+		phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev,
+					 i);
+		if (!phy->phy)
+			return -ENOMEM;
+
+		phy->phy->identify.initiator_port_protocols =
+			phy->iproto;
+		phy->phy->identify.target_port_protocols = phy->tproto;
+		phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr);
+		phy->phy->identify.phy_identifier = i;
+		phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+		phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+		phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+		phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+		sas_phy_add(phy->phy);
+	}
+
+	return 0;
+}
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
new file mode 100644
index 000000000000..253cdcf306a2
--- /dev/null
+++ b/drivers/scsi/libsas/sas_port.c
@@ -0,0 +1,279 @@
+/*
+ * Serial Attached SCSI (SAS) Port class
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/**
+ * sas_form_port -- add this phy to a port
+ * @phy: the phy of interest
+ *
+ * This function adds this phy to an existing port, thus creating a wide
+ * port, or it creates a port and adds the phy to the port.
+ */
+static void sas_form_port(struct asd_sas_phy *phy)
+{
+	int i;
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct asd_sas_port *port = phy->port;
+	struct sas_internal *si =
+		to_sas_internal(sas_ha->core.shost->transportt);
+
+	if (port) {
+		if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
+			   SAS_ADDR_SIZE) == 0)
+			sas_deform_port(phy);
+		else {
+			SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
+				    __FUNCTION__, phy->id, phy->port->id,
+				    phy->port->num_phys);
+			return;
+		}
+	}
+
+	/* find a port */
+	spin_lock(&sas_ha->phy_port_lock);
+	for (i = 0; i < sas_ha->num_phys; i++) {
+		port = sas_ha->sas_port[i];
+		spin_lock(&port->phy_list_lock);
+		if (*(u64 *) port->sas_addr &&
+		    memcmp(port->attached_sas_addr,
+			   phy->attached_sas_addr, SAS_ADDR_SIZE) == 0 &&
+		    port->num_phys > 0) {
+			/* wide port */
+			SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
+				    port->id);
+			break;
+		} else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
+			memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
+			break;
+		}
+		spin_unlock(&port->phy_list_lock);
+	}
+
+	if (i >= sas_ha->num_phys) {
+		printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
+		       __FUNCTION__);
+		spin_unlock(&sas_ha->phy_port_lock);
+		return;
+	}
+
+	/* add the phy to the port */
+	list_add_tail(&phy->port_phy_el, &port->phy_list);
+	phy->port = port;
+	port->num_phys++;
+	port->phy_mask |= (1U << phy->id);
+
+	if (!port->phy)
+		port->phy = phy->phy;
+
+	SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id,
+		    port->id, port->phy_mask);
+
+	if (*(u64 *)port->attached_sas_addr == 0) {
+		port->class = phy->class;
+		memcpy(port->attached_sas_addr, phy->attached_sas_addr,
+		       SAS_ADDR_SIZE);
+		port->iproto = phy->iproto;
+		port->tproto = phy->tproto;
+		port->oob_mode = phy->oob_mode;
+		port->linkrate = phy->linkrate;
+	} else
+		port->linkrate = max(port->linkrate, phy->linkrate);
+	spin_unlock(&port->phy_list_lock);
+	spin_unlock(&sas_ha->phy_port_lock);
+
+	if (!port->port) {
+		port->port = sas_port_alloc(phy->phy->dev.parent, port->id);
+		BUG_ON(!port->port);
+		sas_port_add(port->port);
+	}
+	sas_port_add_phy(port->port, phy->phy);
+
+	if (port->port_dev)
+		port->port_dev->pathways = port->num_phys;
+
+	/* Tell the LLDD about this port formation. */
+	if (si->dft->lldd_port_formed)
+		si->dft->lldd_port_formed(phy);
+
+	sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
+}
+
+/**
+ * sas_deform_port -- remove this phy from the port it belongs to
+ * @phy: the phy of interest
+ *
+ * This is called when the physical link to the other phy has been
+ * lost (on this phy), in Event thread context. We cannot delay here.
+ */
+void sas_deform_port(struct asd_sas_phy *phy)
+{
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct asd_sas_port *port = phy->port;
+	struct sas_internal *si =
+		to_sas_internal(sas_ha->core.shost->transportt);
+
+	if (!port)
+		return;		  /* done by a phy event */
+
+	if (port->port_dev)
+		port->port_dev->pathways--;
+
+	if (port->num_phys == 1) {
+		sas_unregister_domain_devices(port);
+		sas_port_delete(port->port);
+		port->port = NULL;
+	} else
+		sas_port_delete_phy(port->port, phy->phy);
+
+
+	if (si->dft->lldd_port_deformed)
+		si->dft->lldd_port_deformed(phy);
+
+	spin_lock(&sas_ha->phy_port_lock);
+	spin_lock(&port->phy_list_lock);
+
+	list_del_init(&phy->port_phy_el);
+	phy->port = NULL;
+	port->num_phys--;
+	port->phy_mask &= ~(1U << phy->id);
+
+	if (port->num_phys == 0) {
+		INIT_LIST_HEAD(&port->phy_list);
+		memset(port->sas_addr, 0, SAS_ADDR_SIZE);
+		memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE);
+		port->class = 0;
+		port->iproto = 0;
+		port->tproto = 0;
+		port->oob_mode = 0;
+		port->phy_mask = 0;
+	}
+	spin_unlock(&port->phy_list_lock);
+	spin_unlock(&sas_ha->phy_port_lock);
+
+	return;
+}
+
+/* ---------- SAS port events ---------- */
+
+void sas_porte_bytes_dmaed(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_BYTES_DMAED, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	sas_form_port(phy);
+}
+
+void sas_porte_broadcast_rcvd(void *data)
+{
+	unsigned long flags;
+	u32 prim;
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_BROADCAST_RCVD, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	spin_lock_irqsave(&phy->sas_prim_lock, flags);
+	prim = phy->sas_prim;
+	spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
+
+	SAS_DPRINTK("broadcast received: %d\n", prim);
+	sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
+}
+
+void sas_porte_link_reset_err(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	sas_deform_port(phy);
+}
+
+void sas_porte_timer_event(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	sas_deform_port(phy);
+}
+
+void sas_porte_hard_reset(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	sas_deform_port(phy);
+}
+
+/* ---------- SAS port registration ---------- */
+
+static void sas_init_port(struct asd_sas_port *port,
+			  struct sas_ha_struct *sas_ha, int i)
+{
+	port->id = i;
+	INIT_LIST_HEAD(&port->dev_list);
+	spin_lock_init(&port->phy_list_lock);
+	INIT_LIST_HEAD(&port->phy_list);
+	port->num_phys = 0;
+	port->phy_mask = 0;
+	port->ha = sas_ha;
+
+	spin_lock_init(&port->dev_list_lock);
+}
+
+int sas_register_ports(struct sas_ha_struct *sas_ha)
+{
+	int i;
+
+	/* initialize the ports and discovery */
+	for (i = 0; i < sas_ha->num_phys; i++) {
+		struct asd_sas_port *port = sas_ha->sas_port[i];
+
+		sas_init_port(port, sas_ha, i);
+		sas_init_disc(&port->disc, port);
+	}
+	return 0;
+}
+
+void sas_unregister_ports(struct sas_ha_struct *sas_ha)
+{
+	int i;
+
+	for (i = 0; i < sas_ha->num_phys; i++)
+		if (sas_ha->sas_phy[i]->port)
+			sas_deform_port(sas_ha->sas_phy[i]);
+
+}
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
new file mode 100644
index 000000000000..43e0e4e36934
--- /dev/null
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -0,0 +1,786 @@
+/*
+ * Serial Attached SCSI (SAS) class SCSI Host glue.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+#include <linux/err.h>
+#include <linux/blkdev.h>
+#include <linux/scatterlist.h>
+
+/* ---------- SCSI Host glue ---------- */
+
+#define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
+#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
+
+static void sas_scsi_task_done(struct sas_task *task)
+{
+	struct task_status_struct *ts = &task->task_status;
+	struct scsi_cmnd *sc = task->uldd_task;
+	unsigned ts_flags = task->task_state_flags;
+	int hs = 0, stat = 0;
+
+	if (unlikely(!sc)) {
+		SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
+		list_del_init(&task->list);
+		sas_free_task(task);
+		return;
+	}
+
+	if (ts->resp == SAS_TASK_UNDELIVERED) {
+		/* transport error */
+		hs = DID_NO_CONNECT;
+	} else { /* ts->resp == SAS_TASK_COMPLETE */
+		/* task delivered, what happened afterwards? */
+		switch (ts->stat) {
+		case SAS_DEV_NO_RESPONSE:
+		case SAS_INTERRUPTED:
+		case SAS_PHY_DOWN:
+		case SAS_NAK_R_ERR:
+		case SAS_OPEN_TO:
+			hs = DID_NO_CONNECT;
+			break;
+		case SAS_DATA_UNDERRUN:
+			sc->resid = ts->residual;
+			if (sc->request_bufflen - sc->resid < sc->underflow)
+				hs = DID_ERROR;
+			break;
+		case SAS_DATA_OVERRUN:
+			hs = DID_ERROR;
+			break;
+		case SAS_QUEUE_FULL:
+			hs = DID_SOFT_ERROR; /* retry */
+			break;
+		case SAS_DEVICE_UNKNOWN:
+			hs = DID_BAD_TARGET;
+			break;
+		case SAS_SG_ERR:
+			hs = DID_PARITY;
+			break;
+		case SAS_OPEN_REJECT:
+			if (ts->open_rej_reason == SAS_OREJ_RSVD_RETRY)
+				hs = DID_SOFT_ERROR; /* retry */
+			else
+				hs = DID_ERROR;
+			break;
+		case SAS_PROTO_RESPONSE:
+			SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP "
+				    "task; please report this\n",
+				    task->dev->port->ha->sas_ha_name);
+			break;
+		case SAS_ABORTED_TASK:
+			hs = DID_ABORT;
+			break;
+		case SAM_CHECK_COND:
+			memcpy(sc->sense_buffer, ts->buf,
+			       max(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size));
+			stat = SAM_CHECK_COND;
+			break;
+		default:
+			stat = ts->stat;
+			break;
+		}
+	}
+	ASSIGN_SAS_TASK(sc, NULL);
+	sc->result = (hs << 16) | stat;
+	list_del_init(&task->list);
+	sas_free_task(task);
+	/* This is very ugly but this is how SCSI Core works. */
+	if (ts_flags & SAS_TASK_STATE_ABORTED)
+		scsi_finish_command(sc);
+	else
+		sc->scsi_done(sc);
+}
+
+static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd)
+{
+	enum task_attribute ta = TASK_ATTR_SIMPLE;
+	if (cmd->request && blk_rq_tagged(cmd->request)) {
+		if (cmd->device->ordered_tags &&
+		    (cmd->request->flags & REQ_HARDBARRIER))
+			ta = TASK_ATTR_HOQ;
+	}
+	return ta;
+}
+
+static struct sas_task *sas_create_task(struct scsi_cmnd *cmd,
+					       struct domain_device *dev,
+					       unsigned long gfp_flags)
+{
+	struct sas_task *task = sas_alloc_task(gfp_flags);
+	struct scsi_lun lun;
+
+	if (!task)
+		return NULL;
+
+	*(u32 *)cmd->sense_buffer = 0;
+	task->uldd_task = cmd;
+	ASSIGN_SAS_TASK(cmd, task);
+
+	task->dev = dev;
+	task->task_proto = task->dev->tproto; /* BUG_ON(!SSP) */
+
+	task->ssp_task.retry_count = 1;
+	int_to_scsilun(cmd->device->lun, &lun);
+	memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8);
+	task->ssp_task.task_attr = sas_scsi_get_task_attr(cmd);
+	memcpy(task->ssp_task.cdb, cmd->cmnd, 16);
+
+	task->scatter = cmd->request_buffer;
+	task->num_scatter = cmd->use_sg;
+	task->total_xfer_len = cmd->request_bufflen;
+	task->data_dir = cmd->sc_data_direction;
+
+	task->task_done = sas_scsi_task_done;
+
+	return task;
+}
+
+static int sas_queue_up(struct sas_task *task)
+{
+	struct sas_ha_struct *sas_ha = task->dev->port->ha;
+	struct scsi_core *core = &sas_ha->core;
+	unsigned long flags;
+	LIST_HEAD(list);
+
+	spin_lock_irqsave(&core->task_queue_lock, flags);
+	if (sas_ha->lldd_queue_size < core->task_queue_size + 1) {
+		spin_unlock_irqrestore(&core->task_queue_lock, flags);
+		return -SAS_QUEUE_FULL;
+	}
+	list_add_tail(&task->list, &core->task_queue);
+	core->task_queue_size += 1;
+	spin_unlock_irqrestore(&core->task_queue_lock, flags);
+	up(&core->queue_thread_sema);
+
+	return 0;
+}
+
+/**
+ * sas_queuecommand -- Enqueue a command for processing
+ * @parameters: See SCSI Core documentation
+ *
+ * Note: XXX: Remove the host unlock/lock pair when SCSI Core can
+ * call us without holding an IRQ spinlock...
+ */
+int sas_queuecommand(struct scsi_cmnd *cmd,
+		     void (*scsi_done)(struct scsi_cmnd *))
+{
+	int res = 0;
+	struct domain_device *dev = cmd_to_domain_dev(cmd);
+	struct Scsi_Host *host = cmd->device->host;
+	struct sas_internal *i = to_sas_internal(host->transportt);
+
+	spin_unlock_irq(host->host_lock);
+
+	{
+		struct sas_ha_struct *sas_ha = dev->port->ha;
+		struct sas_task *task;
+
+		res = -ENOMEM;
+		task = sas_create_task(cmd, dev, GFP_ATOMIC);
+		if (!task)
+			goto out;
+
+		cmd->scsi_done = scsi_done;
+		/* Queue up, Direct Mode or Task Collector Mode. */
+		if (sas_ha->lldd_max_execute_num < 2)
+			res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
+		else
+			res = sas_queue_up(task);
+
+		/* Examine */
+		if (res) {
+			SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+			ASSIGN_SAS_TASK(cmd, NULL);
+			sas_free_task(task);
+			if (res == -SAS_QUEUE_FULL) {
+				cmd->result = DID_SOFT_ERROR << 16; /* retry */
+				res = 0;
+				scsi_done(cmd);
+			}
+			goto out;
+		}
+	}
+out:
+	spin_lock_irq(host->host_lock);
+	return res;
+}
+
+static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
+{
+	struct scsi_cmnd *cmd, *n;
+
+	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+		if (cmd == my_cmd)
+			list_del_init(&cmd->eh_entry);
+	}
+}
+
+static void sas_scsi_clear_queue_I_T(struct list_head *error_q,
+				     struct domain_device *dev)
+{
+	struct scsi_cmnd *cmd, *n;
+
+	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+		struct domain_device *x = cmd_to_domain_dev(cmd);
+
+		if (x == dev)
+			list_del_init(&cmd->eh_entry);
+	}
+}
+
+static void sas_scsi_clear_queue_port(struct list_head *error_q,
+				      struct asd_sas_port *port)
+{
+	struct scsi_cmnd *cmd, *n;
+
+	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+		struct domain_device *dev = cmd_to_domain_dev(cmd);
+		struct asd_sas_port *x = dev->port;
+
+		if (x == port)
+			list_del_init(&cmd->eh_entry);
+	}
+}
+
+enum task_disposition {
+	TASK_IS_DONE,
+	TASK_IS_ABORTED,
+	TASK_IS_AT_LU,
+	TASK_IS_NOT_AT_LU,
+};
+
+static enum task_disposition sas_scsi_find_task(struct sas_task *task)
+{
+	struct sas_ha_struct *ha = task->dev->port->ha;
+	unsigned long flags;
+	int i, res;
+	struct sas_internal *si =
+		to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+	if (ha->lldd_max_execute_num > 1) {
+		struct scsi_core *core = &ha->core;
+		struct sas_task *t, *n;
+
+		spin_lock_irqsave(&core->task_queue_lock, flags);
+		list_for_each_entry_safe(t, n, &core->task_queue, list) {
+			if (task == t) {
+				list_del_init(&t->list);
+				spin_unlock_irqrestore(&core->task_queue_lock,
+						       flags);
+				SAS_DPRINTK("%s: task 0x%p aborted from "
+					    "task_queue\n",
+					    __FUNCTION__, task);
+				return TASK_IS_ABORTED;
+			}
+		}
+		spin_unlock_irqrestore(&core->task_queue_lock, flags);
+	}
+
+	for (i = 0; i < 5; i++) {
+		SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
+		res = si->dft->lldd_abort_task(task);
+
+		spin_lock_irqsave(&task->task_state_lock, flags);
+		if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+			spin_unlock_irqrestore(&task->task_state_lock, flags);
+			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+				    task);
+			return TASK_IS_DONE;
+		}
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+		if (res == TMF_RESP_FUNC_COMPLETE) {
+			SAS_DPRINTK("%s: task 0x%p is aborted\n",
+				    __FUNCTION__, task);
+			return TASK_IS_ABORTED;
+		} else if (si->dft->lldd_query_task) {
+			SAS_DPRINTK("%s: querying task 0x%p\n",
+				    __FUNCTION__, task);
+			res = si->dft->lldd_query_task(task);
+			if (res == TMF_RESP_FUNC_SUCC) {
+				SAS_DPRINTK("%s: task 0x%p at LU\n",
+					    __FUNCTION__, task);
+				return TASK_IS_AT_LU;
+			} else if (res == TMF_RESP_FUNC_COMPLETE) {
+				SAS_DPRINTK("%s: task 0x%p not at LU\n",
+					    __FUNCTION__, task);
+				return TASK_IS_NOT_AT_LU;
+			}
+		}
+	}
+	return res;
+}
+
+static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd)
+{
+	int res = TMF_RESP_FUNC_FAILED;
+	struct scsi_lun lun;
+	struct sas_internal *i =
+		to_sas_internal(dev->port->ha->core.shost->transportt);
+
+	int_to_scsilun(cmd->device->lun, &lun);
+
+	SAS_DPRINTK("eh: device %llx LUN %x has the task\n",
+		    SAS_ADDR(dev->sas_addr),
+		    cmd->device->lun);
+
+	if (i->dft->lldd_abort_task_set)
+		res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun);
+
+	if (res == TMF_RESP_FUNC_FAILED) {
+		if (i->dft->lldd_clear_task_set)
+			res = i->dft->lldd_clear_task_set(dev, lun.scsi_lun);
+	}
+
+	if (res == TMF_RESP_FUNC_FAILED) {
+		if (i->dft->lldd_lu_reset)
+			res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
+	}
+
+	return res;
+}
+
+static int sas_recover_I_T(struct domain_device *dev)
+{
+	int res = TMF_RESP_FUNC_FAILED;
+	struct sas_internal *i =
+		to_sas_internal(dev->port->ha->core.shost->transportt);
+
+	SAS_DPRINTK("I_T nexus reset for dev %016llx\n",
+		    SAS_ADDR(dev->sas_addr));
+
+	if (i->dft->lldd_I_T_nexus_reset)
+		res = i->dft->lldd_I_T_nexus_reset(dev);
+
+	return res;
+}
+
+void sas_scsi_recover_host(struct Scsi_Host *shost)
+{
+	struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+	unsigned long flags;
+	LIST_HEAD(error_q);
+	struct scsi_cmnd *cmd, *n;
+	enum task_disposition res = TASK_IS_DONE;
+	int tmf_resp;
+	struct sas_internal *i = to_sas_internal(shost->transportt);
+
+	spin_lock_irqsave(shost->host_lock, flags);
+	list_splice_init(&shost->eh_cmd_q, &error_q);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	SAS_DPRINTK("Enter %s\n", __FUNCTION__);
+
+	/* All tasks on this list were marked SAS_TASK_STATE_ABORTED
+	 * by sas_scsi_timed_out() callback.
+	 */
+Again:
+	SAS_DPRINTK("going over list...\n");
+	list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+		struct sas_task *task = TO_SAS_TASK(cmd);
+
+		SAS_DPRINTK("trying to find task 0x%p\n", task);
+		list_del_init(&cmd->eh_entry);
+		res = sas_scsi_find_task(task);
+
+		cmd->eh_eflags = 0;
+		shost->host_failed--;
+
+		switch (res) {
+		case TASK_IS_DONE:
+			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+				    task);
+			task->task_done(task);
+			continue;
+		case TASK_IS_ABORTED:
+			SAS_DPRINTK("%s: task 0x%p is aborted\n",
+				    __FUNCTION__, task);
+			task->task_done(task);
+			continue;
+		case TASK_IS_AT_LU:
+			SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+			tmf_resp = sas_recover_lu(task->dev, cmd);
+			if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+				SAS_DPRINTK("dev %016llx LU %x is "
+					    "recovered\n",
+					    SAS_ADDR(task->dev),
+					    cmd->device->lun);
+				task->task_done(task);
+				sas_scsi_clear_queue_lu(&error_q, cmd);
+				goto Again;
+			}
+			/* fallthrough */
+		case TASK_IS_NOT_AT_LU:
+			SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
+				    task);
+			tmf_resp = sas_recover_I_T(task->dev);
+			if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+				SAS_DPRINTK("I_T %016llx recovered\n",
+					    SAS_ADDR(task->dev->sas_addr));
+				task->task_done(task);
+				sas_scsi_clear_queue_I_T(&error_q, task->dev);
+				goto Again;
+			}
+			/* Hammer time :-) */
+			if (i->dft->lldd_clear_nexus_port) {
+				struct asd_sas_port *port = task->dev->port;
+				SAS_DPRINTK("clearing nexus for port:%d\n",
+					    port->id);
+				res = i->dft->lldd_clear_nexus_port(port);
+				if (res == TMF_RESP_FUNC_COMPLETE) {
+					SAS_DPRINTK("clear nexus port:%d "
+						    "succeeded\n", port->id);
+					task->task_done(task);
+					sas_scsi_clear_queue_port(&error_q,
+								  port);
+					goto Again;
+				}
+			}
+			if (i->dft->lldd_clear_nexus_ha) {
+				SAS_DPRINTK("clear nexus ha\n");
+				res = i->dft->lldd_clear_nexus_ha(ha);
+				if (res == TMF_RESP_FUNC_COMPLETE) {
+					SAS_DPRINTK("clear nexus ha "
+						    "succeeded\n");
+					task->task_done(task);
+					goto out;
+				}
+			}
+			/* If we are here -- this means that no amount
+			 * of effort could recover from errors.  Quite
+			 * possibly the HA just disappeared.
+			 */
+			SAS_DPRINTK("error from  device %llx, LUN %x "
+				    "couldn't be recovered in any way\n",
+				    SAS_ADDR(task->dev->sas_addr),
+				    cmd->device->lun);
+
+			task->task_done(task);
+			goto clear_q;
+		}
+	}
+out:
+	SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
+	return;
+clear_q:
+	SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
+	list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+		struct sas_task *task = TO_SAS_TASK(cmd);
+		list_del_init(&cmd->eh_entry);
+		task->task_done(task);
+	}
+}
+
+enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+	struct sas_task *task = TO_SAS_TASK(cmd);
+	unsigned long flags;
+
+	if (!task) {
+		SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+			    cmd, task);
+		return EH_HANDLED;
+	}
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+			    cmd, task);
+		return EH_HANDLED;
+	}
+	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_NOT_HANDLED\n",
+		    cmd, task);
+
+	return EH_NOT_HANDLED;
+}
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
+{
+	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
+	struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+	struct domain_device *found_dev = NULL;
+	int i;
+
+	spin_lock(&ha->phy_port_lock);
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_port *port = ha->sas_port[i];
+		struct domain_device *dev;
+
+		spin_lock(&port->dev_list_lock);
+		list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+			if (rphy == dev->rphy) {
+				found_dev = dev;
+				spin_unlock(&port->dev_list_lock);
+				goto found;
+			}
+		}
+		spin_unlock(&port->dev_list_lock);
+	}
+ found:
+	spin_unlock(&ha->phy_port_lock);
+
+	return found_dev;
+}
+
+static inline struct domain_device *sas_find_target(struct scsi_target *starget)
+{
+	struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent);
+
+	return sas_find_dev_by_rphy(rphy);
+}
+
+int sas_target_alloc(struct scsi_target *starget)
+{
+	struct domain_device *found_dev = sas_find_target(starget);
+
+	if (!found_dev)
+		return -ENODEV;
+
+	starget->hostdata = found_dev;
+	return 0;
+}
+
+#define SAS_DEF_QD 32
+#define SAS_MAX_QD 64
+
+int sas_slave_configure(struct scsi_device *scsi_dev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+	struct sas_ha_struct *sas_ha;
+
+	BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
+
+	sas_ha = dev->port->ha;
+
+	sas_read_port_mode_page(scsi_dev);
+
+	if (scsi_dev->tagged_supported) {
+		scsi_set_tag_type(scsi_dev, MSG_SIMPLE_TAG);
+		scsi_activate_tcq(scsi_dev, SAS_DEF_QD);
+	} else {
+		SAS_DPRINTK("device %llx, LUN %x doesn't support "
+			    "TCQ\n", SAS_ADDR(dev->sas_addr),
+			    scsi_dev->lun);
+		scsi_dev->tagged_supported = 0;
+		scsi_set_tag_type(scsi_dev, 0);
+		scsi_deactivate_tcq(scsi_dev, 1);
+	}
+
+	return 0;
+}
+
+void sas_slave_destroy(struct scsi_device *scsi_dev)
+{
+}
+
+int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth)
+{
+	int res = min(new_depth, SAS_MAX_QD);
+
+	if (scsi_dev->tagged_supported)
+		scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev),
+					res);
+	else {
+		struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+		sas_printk("device %llx LUN %x queue depth changed to 1\n",
+			   SAS_ADDR(dev->sas_addr),
+			   scsi_dev->lun);
+		scsi_adjust_queue_depth(scsi_dev, 0, 1);
+		res = 1;
+	}
+
+	return res;
+}
+
+int sas_change_queue_type(struct scsi_device *scsi_dev, int qt)
+{
+	if (!scsi_dev->tagged_supported)
+		return 0;
+
+	scsi_deactivate_tcq(scsi_dev, 1);
+
+	scsi_set_tag_type(scsi_dev, qt);
+	scsi_activate_tcq(scsi_dev, scsi_dev->queue_depth);
+
+	return qt;
+}
+
+int sas_bios_param(struct scsi_device *scsi_dev,
+			  struct block_device *bdev,
+			  sector_t capacity, int *hsc)
+{
+	hsc[0] = 255;
+	hsc[1] = 63;
+	sector_div(capacity, 255*63);
+	hsc[2] = capacity;
+
+	return 0;
+}
+
+/* ---------- Task Collector Thread implementation ---------- */
+
+static void sas_queue(struct sas_ha_struct *sas_ha)
+{
+	struct scsi_core *core = &sas_ha->core;
+	unsigned long flags;
+	LIST_HEAD(q);
+	int can_queue;
+	int res;
+	struct sas_internal *i = to_sas_internal(core->shost->transportt);
+
+	spin_lock_irqsave(&core->task_queue_lock, flags);
+	while (!core->queue_thread_kill &&
+	       !list_empty(&core->task_queue)) {
+
+		can_queue = sas_ha->lldd_queue_size - core->task_queue_size;
+		if (can_queue >= 0) {
+			can_queue = core->task_queue_size;
+			list_splice_init(&core->task_queue, &q);
+		} else {
+			struct list_head *a, *n;
+
+			can_queue = sas_ha->lldd_queue_size;
+			list_for_each_safe(a, n, &core->task_queue) {
+				list_move_tail(a, &q);
+				if (--can_queue == 0)
+					break;
+			}
+			can_queue = sas_ha->lldd_queue_size;
+		}
+		core->task_queue_size -= can_queue;
+		spin_unlock_irqrestore(&core->task_queue_lock, flags);
+		{
+			struct sas_task *task = list_entry(q.next,
+							   struct sas_task,
+							   list);
+			list_del_init(&q);
+			res = i->dft->lldd_execute_task(task, can_queue,
+							GFP_KERNEL);
+			if (unlikely(res))
+				__list_add(&q, task->list.prev, &task->list);
+		}
+		spin_lock_irqsave(&core->task_queue_lock, flags);
+		if (res) {
+			list_splice_init(&q, &core->task_queue); /*at head*/
+			core->task_queue_size += can_queue;
+		}
+	}
+	spin_unlock_irqrestore(&core->task_queue_lock, flags);
+}
+
+static DECLARE_COMPLETION(queue_th_comp);
+
+/**
+ * sas_queue_thread -- The Task Collector thread
+ * @_sas_ha: pointer to struct sas_ha
+ */
+static int sas_queue_thread(void *_sas_ha)
+{
+	struct sas_ha_struct *sas_ha = _sas_ha;
+	struct scsi_core *core = &sas_ha->core;
+
+	daemonize("sas_queue_%d", core->shost->host_no);
+	current->flags |= PF_NOFREEZE;
+
+	complete(&queue_th_comp);
+
+	while (1) {
+		down_interruptible(&core->queue_thread_sema);
+		sas_queue(sas_ha);
+		if (core->queue_thread_kill)
+			break;
+	}
+
+	complete(&queue_th_comp);
+
+	return 0;
+}
+
+int sas_init_queue(struct sas_ha_struct *sas_ha)
+{
+	int res;
+	struct scsi_core *core = &sas_ha->core;
+
+	spin_lock_init(&core->task_queue_lock);
+	core->task_queue_size = 0;
+	INIT_LIST_HEAD(&core->task_queue);
+	init_MUTEX_LOCKED(&core->queue_thread_sema);
+
+	res = kernel_thread(sas_queue_thread, sas_ha, 0);
+	if (res >= 0)
+		wait_for_completion(&queue_th_comp);
+
+	return res < 0 ? res : 0;
+}
+
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha)
+{
+	unsigned long flags;
+	struct scsi_core *core = &sas_ha->core;
+	struct sas_task *task, *n;
+
+	init_completion(&queue_th_comp);
+	core->queue_thread_kill = 1;
+	up(&core->queue_thread_sema);
+	wait_for_completion(&queue_th_comp);
+
+	if (!list_empty(&core->task_queue))
+		SAS_DPRINTK("HA: %llx: scsi core task queue is NOT empty!?\n",
+			    SAS_ADDR(sas_ha->sas_addr));
+
+	spin_lock_irqsave(&core->task_queue_lock, flags);
+	list_for_each_entry_safe(task, n, &core->task_queue, list) {
+		struct scsi_cmnd *cmd = task->uldd_task;
+
+		list_del_init(&task->list);
+
+		ASSIGN_SAS_TASK(cmd, NULL);
+		sas_free_task(task);
+		cmd->result = DID_ABORT << 16;
+		cmd->scsi_done(cmd);
+	}
+	spin_unlock_irqrestore(&core->task_queue_lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(sas_queuecommand);
+EXPORT_SYMBOL_GPL(sas_target_alloc);
+EXPORT_SYMBOL_GPL(sas_slave_configure);
+EXPORT_SYMBOL_GPL(sas_slave_destroy);
+EXPORT_SYMBOL_GPL(sas_change_queue_depth);
+EXPORT_SYMBOL_GPL(sas_change_queue_type);
+EXPORT_SYMBOL_GPL(sas_bios_param);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
new file mode 100644
index 000000000000..72acdabe7f80
--- /dev/null
+++ b/include/scsi/libsas.h
@@ -0,0 +1,627 @@
+/*
+ * SAS host prototypes and structures header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _LIBSAS_H_
+#define _LIBSAS_H_
+
+
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <scsi/sas.h>
+#include <linux/list.h>
+#include <asm/semaphore.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_sas.h>
+
+struct block_device;
+
+enum sas_class {
+	SAS,
+	EXPANDER
+};
+
+enum sas_phy_role {
+	PHY_ROLE_NONE = 0,
+	PHY_ROLE_TARGET = 0x40,
+	PHY_ROLE_INITIATOR = 0x80,
+};
+
+enum sas_phy_type {
+        PHY_TYPE_PHYSICAL,
+        PHY_TYPE_VIRTUAL
+};
+
+/* The events are mnemonically described in sas_dump.c
+ * so when updating/adding events here, please also
+ * update the other file too.
+ */
+enum ha_event {
+	HAE_RESET             = 0U,
+	HA_NUM_EVENTS         = 1,
+};
+
+enum port_event {
+	PORTE_BYTES_DMAED     = 0U,
+	PORTE_BROADCAST_RCVD  = 1,
+	PORTE_LINK_RESET_ERR  = 2,
+	PORTE_TIMER_EVENT     = 3,
+	PORTE_HARD_RESET      = 4,
+	PORT_NUM_EVENTS       = 5,
+};
+
+enum phy_event {
+	PHYE_LOSS_OF_SIGNAL   = 0U,
+	PHYE_OOB_DONE         = 1,
+	PHYE_OOB_ERROR        = 2,
+	PHYE_SPINUP_HOLD      = 3, /* hot plug SATA, no COMWAKE sent */
+	PHY_NUM_EVENTS        = 4,
+};
+
+enum discover_event {
+	DISCE_DISCOVER_DOMAIN   = 0U,
+	DISCE_REVALIDATE_DOMAIN = 1,
+	DISCE_PORT_GONE         = 2,
+	DISC_NUM_EVENTS 	= 3,
+};
+
+/* ---------- Expander Devices ---------- */
+
+#define ETASK 0xFA
+
+#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
+#define to_dev_attr(_attr)  container_of(_attr, struct domain_dev_attribute,\
+                                         attr)
+
+enum routing_attribute {
+	DIRECT_ROUTING,
+	SUBTRACTIVE_ROUTING,
+	TABLE_ROUTING,
+};
+
+enum ex_phy_state {
+	PHY_EMPTY,
+	PHY_VACANT,
+	PHY_NOT_PRESENT,
+	PHY_DEVICE_DISCOVERED
+};
+
+struct ex_phy {
+	int    phy_id;
+
+	enum ex_phy_state phy_state;
+
+	enum sas_dev_type attached_dev_type;
+	enum sas_phy_linkrate linkrate;
+
+	u8   attached_sata_host:1;
+	u8   attached_sata_dev:1;
+	u8   attached_sata_ps:1;
+
+	enum sas_proto attached_tproto;
+	enum sas_proto attached_iproto;
+
+	u8   attached_sas_addr[SAS_ADDR_SIZE];
+	u8   attached_phy_id;
+
+	u8   phy_change_count;
+	enum routing_attribute routing_attr;
+	u8   virtual:1;
+
+	int  last_da_index;
+
+	struct sas_phy *phy;
+	struct sas_port *port;
+};
+
+struct expander_device {
+	struct list_head children;
+
+	u16    ex_change_count;
+	u16    max_route_indexes;
+	u8     num_phys;
+	u8     configuring:1;
+	u8     conf_route_table:1;
+	u8     enclosure_logical_id[8];
+
+	struct ex_phy *ex_phy;
+	struct sas_port *parent_port;
+};
+
+/* ---------- SATA device ---------- */
+enum ata_command_set {
+        ATA_COMMAND_SET   = 0,
+        ATAPI_COMMAND_SET = 1,
+};
+
+struct sata_device {
+        enum   ata_command_set command_set;
+        struct smp_resp        rps_resp; /* report_phy_sata_resp */
+        __le16 *identify_device;
+        __le16 *identify_packet_device;
+
+        u8     port_no;        /* port number, if this is a PM (Port) */
+        struct list_head children; /* PM Ports if this is a PM */
+};
+
+/* ---------- Domain device ---------- */
+struct domain_device {
+        enum sas_dev_type dev_type;
+
+        enum sas_phy_linkrate linkrate;
+        enum sas_phy_linkrate min_linkrate;
+        enum sas_phy_linkrate max_linkrate;
+
+        int  pathways;
+
+        struct domain_device *parent;
+        struct list_head siblings; /* devices on the same level */
+        struct asd_sas_port *port;        /* shortcut to root of the tree */
+
+        struct list_head dev_list_node;
+
+        enum sas_proto    iproto;
+        enum sas_proto    tproto;
+
+        struct sas_rphy *rphy;
+
+        u8  sas_addr[SAS_ADDR_SIZE];
+        u8  hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+        u8  frame_rcvd[32];
+
+        union {
+                struct expander_device ex_dev;
+                struct sata_device     sata_dev; /* STP & directly attached */
+        };
+
+        void *lldd_dev;
+};
+
+struct sas_discovery {
+	spinlock_t disc_event_lock;
+	struct work_struct disc_work[DISC_NUM_EVENTS];
+	unsigned long    pending;
+	u8     fanout_sas_addr[8];
+	u8     eeds_a[8];
+	u8     eeds_b[8];
+	int    max_level;
+};
+
+
+/* The port struct is Class:RW, driver:RO */
+struct asd_sas_port {
+/* private: */
+	struct completion port_gone_completion;
+
+	struct sas_discovery disc;
+	struct domain_device *port_dev;
+	spinlock_t dev_list_lock;
+	struct list_head dev_list;
+	enum   sas_phy_linkrate linkrate;
+
+	struct sas_phy *phy;
+	struct work_struct work;
+
+/* public: */
+	int id;
+
+	enum sas_class   class;
+	u8               sas_addr[SAS_ADDR_SIZE];
+	u8               attached_sas_addr[SAS_ADDR_SIZE];
+	enum sas_proto   iproto;
+	enum sas_proto   tproto;
+
+	enum sas_oob_mode oob_mode;
+
+	spinlock_t       phy_list_lock;
+	struct list_head phy_list;
+	int              num_phys;
+	u32              phy_mask;
+
+	struct sas_ha_struct *ha;
+
+	struct sas_port	*port;
+
+	void *lldd_port;	  /* not touched by the sas class code */
+};
+
+/* The phy pretty much is controlled by the LLDD.
+ * The class only reads those fields.
+ */
+struct asd_sas_phy {
+/* private: */
+	/* protected by ha->event_lock */
+	struct work_struct   port_events[PORT_NUM_EVENTS];
+	struct work_struct   phy_events[PHY_NUM_EVENTS];
+
+	unsigned long port_events_pending;
+	unsigned long phy_events_pending;
+
+	int error;
+
+	struct sas_phy *phy;
+
+/* public: */
+	/* The following are class:RO, driver:R/W */
+	int            enabled;	  /* must be set */
+
+	int            id;	  /* must be set */
+	enum sas_class class;
+	enum sas_proto iproto;
+	enum sas_proto tproto;
+
+	enum sas_phy_type  type;
+	enum sas_phy_role  role;
+	enum sas_oob_mode  oob_mode;
+	enum sas_phy_linkrate linkrate;
+
+	u8   *sas_addr;		  /* must be set */
+	u8   attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
+
+	spinlock_t     frame_rcvd_lock;
+	u8             *frame_rcvd; /* must be set */
+	int            frame_rcvd_size;
+
+	spinlock_t     sas_prim_lock;
+	u32            sas_prim;
+
+	struct list_head port_phy_el; /* driver:RO */
+	struct asd_sas_port      *port; /* Class:RW, driver: RO */
+
+	struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
+
+	void *lldd_phy;		  /* not touched by the sas_class_code */
+};
+
+struct scsi_core {
+	struct Scsi_Host *shost;
+
+	spinlock_t        task_queue_lock;
+	struct list_head  task_queue;
+	int               task_queue_size;
+
+	struct semaphore  queue_thread_sema;
+	int               queue_thread_kill;
+};
+
+struct sas_ha_struct {
+/* private: */
+	spinlock_t       event_lock;
+	struct work_struct ha_events[HA_NUM_EVENTS];
+	unsigned long	 pending;
+
+	struct scsi_core core;
+
+/* public: */
+	char *sas_ha_name;
+	struct pci_dev *pcidev;	  /* should be set */
+	struct module *lldd_module; /* should be set */
+
+	u8 *sas_addr;		  /* must be set */
+	u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+	spinlock_t      phy_port_lock;
+	struct asd_sas_phy  **sas_phy; /* array of valid pointers, must be set */
+	struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
+	int             num_phys; /* must be set, gt 0, static */
+
+	/* The class calls this to send a task for execution. */
+	int lldd_max_execute_num;
+	int lldd_queue_size;
+
+	/* LLDD calls these to notify the class of an event. */
+	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+	void (*notify_port_event)(struct asd_sas_phy *, enum port_event);
+	void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
+
+	void *lldd_ha;		  /* not touched by sas class code */
+};
+
+#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
+
+static inline struct domain_device *
+starget_to_domain_dev(struct scsi_target *starget) {
+	return starget->hostdata;
+}
+
+static inline struct domain_device *
+sdev_to_domain_dev(struct scsi_device *sdev) {
+	return starget_to_domain_dev(sdev->sdev_target);
+}
+
+static inline struct domain_device *
+cmd_to_domain_dev(struct scsi_cmnd *cmd)
+{
+	return sdev_to_domain_dev(cmd->device);
+}
+
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
+
+/* Before calling a notify event, LLDD should use this function
+ * when the link is severed (possibly from its tasklet).
+ * The idea is that the Class only reads those, while the LLDD,
+ * can R/W these (thus avoiding a race).
+ */
+static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
+{
+	phy->oob_mode = OOB_NOT_CONNECTED;
+	phy->linkrate = PHY_LINKRATE_NONE;
+}
+
+/* ---------- Tasks ---------- */
+/*
+      service_response |  SAS_TASK_COMPLETE  |  SAS_TASK_UNDELIVERED |
+  exec_status          |                     |                       |
+  ---------------------+---------------------+-----------------------+
+       SAM_...         |         X           |                       |
+       DEV_NO_RESPONSE |         X           |           X           |
+       INTERRUPTED     |         X           |                       |
+       QUEUE_FULL      |                     |           X           |
+       DEVICE_UNKNOWN  |                     |           X           |
+       SG_ERR          |                     |           X           |
+  ---------------------+---------------------+-----------------------+
+ */
+
+enum service_response {
+	SAS_TASK_COMPLETE,
+	SAS_TASK_UNDELIVERED = -1,
+};
+
+enum exec_status {
+	SAM_GOOD         = 0,
+	SAM_CHECK_COND   = 2,
+	SAM_COND_MET     = 4,
+	SAM_BUSY         = 8,
+	SAM_INTERMEDIATE = 0x10,
+	SAM_IM_COND_MET  = 0x12,
+	SAM_RESV_CONFLICT= 0x14,
+	SAM_TASK_SET_FULL= 0x28,
+	SAM_ACA_ACTIVE   = 0x30,
+	SAM_TASK_ABORTED = 0x40,
+
+	SAS_DEV_NO_RESPONSE = 0x80,
+	SAS_DATA_UNDERRUN,
+	SAS_DATA_OVERRUN,
+	SAS_INTERRUPTED,
+	SAS_QUEUE_FULL,
+	SAS_DEVICE_UNKNOWN,
+	SAS_SG_ERR,
+	SAS_OPEN_REJECT,
+	SAS_OPEN_TO,
+	SAS_PROTO_RESPONSE,
+	SAS_PHY_DOWN,
+	SAS_NAK_R_ERR,
+	SAS_PENDING,
+	SAS_ABORTED_TASK,
+};
+
+/* When a task finishes with a response, the LLDD examines the
+ * response:
+ * 	- For an ATA task task_status_struct::stat is set to
+ * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
+ * contents of struct ata_task_resp.
+ * 	- For SSP tasks, if no data is present or status/TMF response
+ * is valid, task_status_struct::stat is set.  If data is present
+ * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
+ * task_status_struct::buf_valid_size, and task_status_struct::stat is
+ * set to SAM_CHECK_COND.
+ *
+ * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
+ * for ATA task.
+ *
+ * "frame_len" is the total frame length, which could be more or less
+ * than actually copied.
+ *
+ * Tasks ending with response, always set the residual field.
+ */
+struct ata_task_resp {
+	u16  frame_len;
+	u8   ending_fis[24];	  /* dev to host or data-in */
+	u32  sstatus;
+	u32  serror;
+	u32  scontrol;
+	u32  sactive;
+};
+
+#define SAS_STATUS_BUF_SIZE 96
+
+struct task_status_struct {
+	enum service_response resp;
+	enum exec_status      stat;
+	int  buf_valid_size;
+
+	u8   buf[SAS_STATUS_BUF_SIZE];
+
+	u32  residual;
+	enum sas_open_rej_reason open_rej_reason;
+};
+
+/* ATA and ATAPI task queuable to a SAS LLDD.
+ */
+struct sas_ata_task {
+	struct host_to_dev_fis fis;
+	u8     atapi_packet[16];  /* 0 if not ATAPI task */
+
+	u8     retry_count;	  /* hardware retry, should be > 0 */
+
+	u8     dma_xfer:1;	  /* PIO:0 or DMA:1 */
+	u8     use_ncq:1;
+	u8     set_affil_pol:1;
+	u8     stp_affil_pol:1;
+
+	u8     device_control_reg_update:1;
+};
+
+struct sas_smp_task {
+	struct scatterlist smp_req;
+	struct scatterlist smp_resp;
+};
+
+enum task_attribute {
+	TASK_ATTR_SIMPLE = 0,
+	TASK_ATTR_HOQ    = 1,
+	TASK_ATTR_ORDERED= 2,
+	TASK_ATTR_ACA    = 4,
+};
+
+struct sas_ssp_task {
+	u8     retry_count;	  /* hardware retry, should be > 0 */
+
+	u8     LUN[8];
+	u8     enable_first_burst:1;
+	enum   task_attribute task_attr;
+	u8     task_prio;
+	u8     cdb[16];
+};
+
+struct sas_task {
+	struct domain_device *dev;
+	struct list_head      list;
+
+	spinlock_t   task_state_lock;
+	unsigned     task_state_flags;
+
+	enum   sas_proto      task_proto;
+
+	/* Used by the discovery code. */
+	struct timer_list     timer;
+	struct completion     completion;
+
+	union {
+		struct sas_ata_task ata_task;
+		struct sas_smp_task smp_task;
+		struct sas_ssp_task ssp_task;
+	};
+
+	struct scatterlist *scatter;
+	int    num_scatter;
+	u32    total_xfer_len;
+	u8     data_dir:2;	  /* Use PCI_DMA_... */
+
+	struct task_status_struct task_status;
+	void   (*task_done)(struct sas_task *);
+
+	void   *lldd_task;	  /* for use by LLDDs */
+	void   *uldd_task;
+};
+
+
+
+#define SAS_TASK_STATE_PENDING  1
+#define SAS_TASK_STATE_DONE     2
+#define SAS_TASK_STATE_ABORTED  4
+
+static inline struct sas_task *sas_alloc_task(unsigned long flags)
+{
+	extern kmem_cache_t *sas_task_cache;
+	struct sas_task *task = kmem_cache_alloc(sas_task_cache, flags);
+
+	if (task) {
+		memset(task, 0, sizeof(*task));
+		INIT_LIST_HEAD(&task->list);
+		spin_lock_init(&task->task_state_lock);
+		task->task_state_flags = SAS_TASK_STATE_PENDING;
+		init_timer(&task->timer);
+		init_completion(&task->completion);
+	}
+
+	return task;
+}
+
+static inline void sas_free_task(struct sas_task *task)
+{
+	if (task) {
+		extern kmem_cache_t *sas_task_cache;
+		BUG_ON(!list_empty(&task->list));
+		kmem_cache_free(sas_task_cache, task);
+	}
+}
+
+struct sas_domain_function_template {
+	/* The class calls these to notify the LLDD of an event. */
+	void (*lldd_port_formed)(struct asd_sas_phy *);
+	void (*lldd_port_deformed)(struct asd_sas_phy *);
+
+	/* The class calls these when a device is found or gone. */
+	int  (*lldd_dev_found)(struct domain_device *);
+	void (*lldd_dev_gone)(struct domain_device *);
+
+	int (*lldd_execute_task)(struct sas_task *, int num,
+				 unsigned long gfp_flags);
+
+	/* Task Management Functions. Must be called from process context. */
+	int (*lldd_abort_task)(struct sas_task *);
+	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_I_T_nexus_reset)(struct domain_device *);
+	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+	int (*lldd_query_task)(struct sas_task *);
+
+	/* Port and Adapter management */
+	int (*lldd_clear_nexus_port)(struct asd_sas_port *);
+	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+	/* Phy management */
+	int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func);
+};
+
+extern int sas_register_ha(struct sas_ha_struct *);
+extern int sas_unregister_ha(struct sas_ha_struct *);
+
+extern int sas_queuecommand(struct scsi_cmnd *,
+		     void (*scsi_done)(struct scsi_cmnd *));
+extern int sas_target_alloc(struct scsi_target *);
+extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_slave_configure(struct scsi_device *);
+extern void sas_slave_destroy(struct scsi_device *);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
+extern int sas_change_queue_type(struct scsi_device *, int qt);
+extern int sas_bios_param(struct scsi_device *,
+			  struct block_device *,
+			  sector_t capacity, int *hsc);
+extern struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *);
+extern void sas_domain_release_transport(struct scsi_transport_template *);
+
+int  sas_discover_root_expander(struct domain_device *);
+
+void sas_init_ex_attr(void);
+
+int  sas_ex_revalidate_domain(struct domain_device *);
+
+void sas_unregister_domain_devices(struct asd_sas_port *port);
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
+int  sas_discover_event(struct asd_sas_port *, enum discover_event ev);
+
+int  sas_discover_sata(struct domain_device *);
+int  sas_discover_end_dev(struct domain_device *);
+
+void sas_unregister_dev(struct domain_device *);
+
+void sas_init_dev(struct domain_device *);
+
+#endif /* _SASLIB_H_ */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
new file mode 100644
index 000000000000..752853a113dc
--- /dev/null
+++ b/include/scsi/sas.h
@@ -0,0 +1,644 @@
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE        8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST             0x40
+#define SMP_RESPONSE            0x41
+
+#define SSP_DATA                0x01
+#define SSP_XFER_RDY            0x05
+#define SSP_COMMAND             0x06
+#define SSP_RESPONSE            0x07
+#define SSP_TASK                0x16
+
+#define SMP_REPORT_GENERAL       0x00
+#define SMP_REPORT_MANUF_INFO    0x01
+#define SMP_READ_GPIO_REG        0x02
+#define SMP_DISCOVER             0x10
+#define SMP_REPORT_PHY_ERR_LOG   0x11
+#define SMP_REPORT_PHY_SATA      0x12
+#define SMP_REPORT_ROUTE_INFO    0x13
+#define SMP_WRITE_GPIO_REG       0x82
+#define SMP_CONF_ROUTE_INFO      0x90
+#define SMP_PHY_CONTROL          0x91
+#define SMP_PHY_TEST_FUNCTION    0x92
+
+#define SMP_RESP_FUNC_ACC        0x00
+#define SMP_RESP_FUNC_UNK        0x01
+#define SMP_RESP_FUNC_FAILED     0x02
+#define SMP_RESP_INV_FRM_LEN     0x03
+#define SMP_RESP_NO_PHY          0x10
+#define SMP_RESP_NO_INDEX        0x11
+#define SMP_RESP_PHY_NO_SATA     0x12
+#define SMP_RESP_PHY_UNK_OP      0x13
+#define SMP_RESP_PHY_UNK_TESTF   0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT      0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK      0x01
+#define TMF_ABORT_TASK_SET  0x02
+#define TMF_CLEAR_TASK_SET  0x04
+#define TMF_LU_RESET        0x08
+#define TMF_CLEAR_ACA       0x40
+#define TMF_QUERY_TASK      0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE   0x00
+#define TMF_RESP_INVALID_FRAME   0x02
+#define TMF_RESP_FUNC_ESUPP      0x04
+#define TMF_RESP_FUNC_FAILED     0x05
+#define TMF_RESP_FUNC_SUCC       0x08
+#define TMF_RESP_NO_LUN          0x09
+#define TMF_RESP_OVERLAPPED_TAG  0x0A
+
+enum sas_oob_mode {
+	OOB_NOT_CONNECTED,
+	SATA_OOB_MODE,
+	SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these.
+ */
+enum sas_dev_type {
+	NO_DEVICE   = 0,	  /* protocol */
+	SAS_END_DEV = 1,	  /* protocol */
+	EDGE_DEV    = 2,	  /* protocol */
+	FANOUT_DEV  = 3,	  /* protocol */
+	SAS_HA      = 4,
+	SATA_DEV    = 5,
+	SATA_PM     = 7,
+	SATA_PM_PORT= 8,
+};
+
+enum sas_phy_linkrate {
+	PHY_LINKRATE_NONE = 0,
+	PHY_LINKRATE_UNKNOWN = 0,
+	PHY_DISABLED,
+	PHY_RESET_PROBLEM,
+	PHY_SPINUP_HOLD,
+	PHY_PORT_SELECTOR,
+	PHY_LINKRATE_1_5 = 0x08,
+	PHY_LINKRATE_G1  = PHY_LINKRATE_1_5,
+	PHY_LINKRATE_3   = 0x09,
+	PHY_LINKRATE_G2  = PHY_LINKRATE_3,
+	PHY_LINKRATE_6   = 0x0A,
+};
+
+/* Partly from IDENTIFY address frame. */
+enum sas_proto {
+	SATA_PROTO    = 1,
+	SAS_PROTO_SMP = 2,	  /* protocol */
+	SAS_PROTO_STP = 4,	  /* protocol */
+	SAS_PROTO_SSP = 8,	  /* protocol */
+	SAS_PROTO_ALL = 0xE,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+	PHY_FUNC_NOP,
+	PHY_FUNC_LINK_RESET,		  /* Enables the phy */
+	PHY_FUNC_HARD_RESET,
+	PHY_FUNC_DISABLE,
+	PHY_FUNC_CLEAR_ERROR_LOG = 5,
+	PHY_FUNC_CLEAR_AFFIL,
+	PHY_FUNC_TX_SATA_PS_SIGNAL,
+	PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+	SAS_PRIM_AIP_NORMAL = 1,
+	SAS_PRIM_AIP_R0     = 2,
+	SAS_PRIM_AIP_R1     = 3,
+	SAS_PRIM_AIP_R2     = 4,
+	SAS_PRIM_AIP_WC     = 5,
+	SAS_PRIM_AIP_WD     = 6,
+	SAS_PRIM_AIP_WP     = 7,
+	SAS_PRIM_AIP_RWP    = 8,
+
+	SAS_PRIM_BC_CH      = 9,
+	SAS_PRIM_BC_RCH0    = 10,
+	SAS_PRIM_BC_RCH1    = 11,
+	SAS_PRIM_BC_R0      = 12,
+	SAS_PRIM_BC_R1      = 13,
+	SAS_PRIM_BC_R2      = 14,
+	SAS_PRIM_BC_R3      = 15,
+	SAS_PRIM_BC_R4      = 16,
+
+	SAS_PRIM_NOTIFY_ENSP= 17,
+	SAS_PRIM_NOTIFY_R0  = 18,
+	SAS_PRIM_NOTIFY_R1  = 19,
+	SAS_PRIM_NOTIFY_R2  = 20,
+
+	SAS_PRIM_CLOSE_CLAF = 21,
+	SAS_PRIM_CLOSE_NORM = 22,
+	SAS_PRIM_CLOSE_R0   = 23,
+	SAS_PRIM_CLOSE_R1   = 24,
+
+	SAS_PRIM_OPEN_RTRY  = 25,
+	SAS_PRIM_OPEN_RJCT  = 26,
+	SAS_PRIM_OPEN_ACPT  = 27,
+
+	SAS_PRIM_DONE       = 28,
+	SAS_PRIM_BREAK      = 29,
+
+	SATA_PRIM_DMAT      = 33,
+	SATA_PRIM_PMNAK     = 34,
+	SATA_PRIM_PMACK     = 35,
+	SATA_PRIM_PMREQ_S   = 36,
+	SATA_PRIM_PMREQ_P   = 37,
+	SATA_SATA_R_ERR     = 38,
+};
+
+enum sas_open_rej_reason {
+	/* Abandon open */
+	SAS_OREJ_UNKNOWN   = 0,
+	SAS_OREJ_BAD_DEST  = 1,
+	SAS_OREJ_CONN_RATE = 2,
+	SAS_OREJ_EPROTO    = 3,
+	SAS_OREJ_RESV_AB0  = 4,
+	SAS_OREJ_RESV_AB1  = 5,
+	SAS_OREJ_RESV_AB2  = 6,
+	SAS_OREJ_RESV_AB3  = 7,
+	SAS_OREJ_WRONG_DEST= 8,
+	SAS_OREJ_STP_NORES = 9,
+
+	/* Retry open */
+	SAS_OREJ_NO_DEST   = 10,
+	SAS_OREJ_PATH_BLOCKED = 11,
+	SAS_OREJ_RSVD_CONT0 = 12,
+	SAS_OREJ_RSVD_CONT1 = 13,
+	SAS_OREJ_RSVD_INIT0 = 14,
+	SAS_OREJ_RSVD_INIT1 = 15,
+	SAS_OREJ_RSVD_STOP0 = 16,
+	SAS_OREJ_RSVD_STOP1 = 17,
+	SAS_OREJ_RSVD_RETRY = 18,
+};
+
+struct  dev_to_host_fis {
+	u8     fis_type;	  /* 0x34 */
+	u8     flags;
+	u8     status;
+	u8     error;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     _r_a;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_b;
+	u8     _r_c;
+
+	u32    _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+	u8     fis_type;	  /* 0x27 */
+	u8     flags;
+	u8     command;
+	u8     features;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     features_exp;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_a;
+	u8     control;
+
+	u32    _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  frame_type:4;
+	u8  dev_type:3;
+	u8  _un0:1;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un20:1;
+			u8  smp_iport:1;
+			u8  stp_iport:1;
+			u8  ssp_iport:1;
+			u8  _un247:4;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8  _un30:1;
+			u8 smp_tport:1;
+			u8 stp_tport:1;
+			u8 ssp_tport:1;
+			u8 _un347:4;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     changing_data_ptr:1;
+	u8     retransmit:1;
+	u8     retry_data_frames:1;
+	u8     _r_c:5;
+
+	u8     num_fill_bytes:2;
+	u8     _r_d:6;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     datapres:2;
+	u8     _r_b:6;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8      conf_route_table:1;
+	u8      configuring:1;
+	u8      _r_b:6;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_c:4;
+	u8    attached_dev_type:3;
+	u8    _r_d:1;
+
+	u8    linkrate:4;
+	u8    _r_e:4;
+
+	u8    attached_sata_host:1;
+	u8    iproto:3;
+	u8    _r_f:4;
+
+	u8    attached_sata_dev:1;
+	u8    tproto:3;
+	u8    _r_g:3;
+	u8    attached_sata_ps:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    hmin_linkrate:4;
+	u8    pmin_linkrate:4;
+	u8    hmax_linkrate:4;
+	u8    pmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    pptv:4;
+	u8    _r_i:3;
+	u8    virtual:1;
+
+	u8    routing_attr:4;
+	u8    _r_j:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    affil_valid:1;
+	u8    affil_supp:1;
+	u8    _r_c:6;
+
+	u32    _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  _un0:1;
+	u8  dev_type:3;
+	u8  frame_type:4;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un247:4;
+			u8  ssp_iport:1;
+			u8  stp_iport:1;
+			u8  smp_iport:1;
+			u8  _un20:1;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8 _un347:4;
+			u8 ssp_tport:1;
+			u8 stp_tport:1;
+			u8 smp_tport:1;
+			u8 _un30:1;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     _r_c:5;
+	u8     retry_data_frames:1;
+	u8     retransmit:1;
+	u8     changing_data_ptr:1;
+
+	u8     _r_d:6;
+	u8     num_fill_bytes:2;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     _r_b:6;
+	u8     datapres:2;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8      _r_b:6;
+	u8      configuring:1;
+	u8      conf_route_table:1;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_d:1;
+	u8    attached_dev_type:3;
+	u8    _r_c:4;
+
+	u8    _r_e:4;
+	u8    linkrate:4;
+
+	u8    _r_f:4;
+	u8    iproto:3;
+	u8    attached_sata_host:1;
+
+	u8    attached_sata_ps:1;
+	u8    _r_g:3;
+	u8    tproto:3;
+	u8    attached_sata_dev:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    pmin_linkrate:4;
+	u8    hmin_linkrate:4;
+	u8    pmax_linkrate:4;
+	u8    hmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    virtual:1;
+	u8    _r_i:3;
+	u8    pptv:4;
+
+	u8    _r_j:4;
+	u8    routing_attr:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    _r_c:6;
+	u8    affil_supp:1;
+	u8    affil_valid:1;
+
+	u32   _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 1bc675201413..84a6d5fe0920 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -429,4 +429,10 @@ struct scsi_lun {
 /* Used to obtain the PCI location of a device */
 #define SCSI_IOCTL_GET_PCI		0x5387
 
+/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
+static inline u32 scsi_to_u32(u8 *ptr)
+{
+	return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
+}
+
 #endif /* _SCSI_SCSI_H */