Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

84 files changed, 691 insertions, 583 deletions

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index c5739d6309df..083c5df42d35 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -596,6 +596,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8752751f9985..45462714caf1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -700,6 +700,8 @@ config APM
 
 endmenu
 
+source "net/Kconfig"
+
 menu "Device Drivers"
 
 source "drivers/base/Kconfig"
@@ -732,7 +734,7 @@ source "drivers/ieee1394/Kconfig"
 
 source "drivers/message/i2o/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig
index dc0c1936969b..1f0373267306 100644
--- a/arch/arm26/Kconfig
+++ b/arch/arm26/Kconfig
@@ -183,6 +183,8 @@ source "mm/Kconfig"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/base/Kconfig"
 
 source "drivers/parport/Kconfig"
@@ -193,7 +195,7 @@ source "drivers/block/Kconfig"
 
 source "drivers/md/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/ide/Kconfig"
 
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index f848e3761491..e5979d68e352 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -122,6 +122,8 @@ source arch/cris/arch-v10/Kconfig
 
 endmenu
 
+source "net/Kconfig"
+
 # bring in ETRAX built-in drivers
 menu "Drivers for built-in interfaces"
 source arch/cris/arch-v10/drivers/Kconfig
@@ -149,7 +151,7 @@ source "drivers/ieee1394/Kconfig"
 
 source "drivers/message/i2o/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index c93f95146cc2..ec85c0d6c6da 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -346,6 +346,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 62a89e812e3e..375f2a8ff3b5 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -55,6 +55,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/base/Kconfig"
 
 source "drivers/mtd/Kconfig"
@@ -65,7 +67,7 @@ source "drivers/ide/Kconfig"
 
 source "arch/h8300/Kconfig.ide"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 #
 # input - input/joystick depends on it. As does USB.
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 6c02336fe2e4..a801d9d48606 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -1285,6 +1285,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 01b78e7f992e..2e08942339ad 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -423,6 +423,8 @@ endmenu
 
 endif
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 42ca8a39798d..7772951df313 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -359,6 +359,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 691a2469ff36..178c4a3fbb72 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -450,6 +450,8 @@ source "drivers/zorro/Kconfig"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 menu "Character devices"
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index dbfcdc8e6087..117f183f0b43 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -575,6 +575,8 @@ config PM
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bd9de7b00c0a..b578239146b5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1640,6 +1640,8 @@ config PM
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index ce327c799b44..1c2d87435233 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -190,6 +190,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 23b0d2f662c5..b833cbcd77f0 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -1355,6 +1355,8 @@ config PIN_TLB
 	depends on ADVANCED_OPTIONS && 8xx
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig
index f804f25232ac..fdd8afba7152 100644
--- a/arch/ppc64/Kconfig
+++ b/arch/ppc64/Kconfig
@@ -429,6 +429,8 @@ config CMDLINE
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 6600ee87f896..477ac2758bd5 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -465,6 +465,8 @@ config KEXEC
 
 endmenu
 
+source "net/Kconfig"
+
 config PCMCIA
 	bool
 	default n
@@ -475,7 +477,7 @@ source "drivers/scsi/Kconfig"
 
 source "drivers/s390/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "fs/Kconfig"
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index a7c8bfc11604..adc8109f8b77 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -784,6 +784,8 @@ config EMBEDDED_RAMDISK_IMAGE
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig
index 708e59736a4d..4c3e5334adb3 100644
--- a/arch/sh64/Kconfig
+++ b/arch/sh64/Kconfig
@@ -268,6 +268,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 7a117ef473c5..aca028aa29bf 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -268,6 +268,8 @@ source "mm/Kconfig"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 if !SUN4
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 6a4733683f0f..140607870f13 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -525,6 +525,8 @@ source "mm/Kconfig"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/base/Kconfig"
 
 source "drivers/video/Kconfig"
@@ -551,7 +553,7 @@ endif
 
 source "drivers/ieee1394/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 6682c7883647..f945444df49c 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -275,6 +275,8 @@ endmenu
 
 source "init/Kconfig"
 
+source "net/Kconfig"
+
 source "drivers/base/Kconfig"
 
 source "arch/um/Kconfig_char"
@@ -287,7 +289,7 @@ config NETDEVICES
 
 source "arch/um/Kconfig_net"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "fs/Kconfig"
 
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index 27febd6ffa80..89c053b6c2c4 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -250,6 +250,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 #############################################################################
 
 source "drivers/base/Kconfig"
@@ -283,7 +285,7 @@ source "drivers/ieee1394/Kconfig"
 
 source "drivers/message/i2o/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index d09437b5c48f..4b8326177c52 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -515,6 +515,8 @@ config UID16
 
 endmenu
 
+source "net/Kconfig"
+
 source drivers/Kconfig
 
 source "drivers/firmware/Kconfig"
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index c9b5d298e3c4..2b6257bec4c3 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -228,6 +228,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"
diff --git a/drivers/Kconfig b/drivers/Kconfig
index aed4a9b97c14..34efb2150e68 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -28,7 +28,7 @@ source "drivers/message/i2o/Kconfig"
 
 source "drivers/macintosh/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2b55687f6ee9..9a07ff7a7777 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3,6 +3,8 @@
 # Network device configuration
 #
 
+menu "Network device support"
+
 config NETDEVICES
 	depends on NET
 	bool "Network device support"
@@ -2547,3 +2549,4 @@ config NETCONSOLE
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
+endmenu
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 69c488d933a2..b14e89004c3a 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -1,6 +1,33 @@
 #
 # Appletalk driver configuration
 #
+config ATALK
+	tristate "Appletalk protocol support"
+	select LLC
+	---help---
+	  AppleTalk is the protocol that Apple computers can use to communicate
+	  on a network.  If your Linux box is connected to such a network and you
+	  wish to connect to it, say Y.  You will need to use the netatalk package
+	  so that your Linux box can act as a print and file server for Macs as
+	  well as access AppleTalk printers.  Check out
+	  <http://www.zettabyte.net/netatalk/> on the WWW for details.
+	  EtherTalk is the name used for AppleTalk over Ethernet and the
+	  cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
+	  network using serial links.  EtherTalk and LocalTalk are fully
+	  supported by Linux.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
+	  NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, contains valuable
+	  information as well.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called appletalk. You almost certainly want to compile it as a
+	  module so you can restart your AppleTalk stack without rebooting
+	  your machine. I hear that the GNU boycott of Apple is over, so
+	  even politically correct people are allowed to say Y here.
+
 config DEV_APPLETALK
 	bool "Appletalk interfaces support"
 	depends on ATALK
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index aad5494c83cf..f0996ce5c268 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -369,7 +369,7 @@ static void myri_tx(struct myri_eth *mp, struct net_device *dev)
  * assume 802.3 if the type field is short enough to be a length.
  * This is normal practice and works for any 'now in use' protocol.
  */
-static unsigned short myri_type_trans(struct sk_buff *skb, struct net_device *dev)
+static __be16 myri_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ethhdr *eth;
 	unsigned char *rawp;
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index f4b62405d2e5..21537ee3a6a7 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -540,7 +540,7 @@ plip_receive(unsigned short nibble_timeout, struct net_device *dev,
  *	in far too many old systems not all even running Linux.
  */
  
-static unsigned short plip_type_trans(struct sk_buff *skb, struct net_device *dev)
+static __be16 plip_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ethhdr *eth;
 	unsigned char *rawp;
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 7217d44e8854..2c83cca34b86 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -861,8 +861,7 @@ fst_tx_dma_complete(struct fst_card_info *card, struct fst_port_info *port,
 /*
  * Mark it for our own raw sockets interface
  */
-static unsigned short farsync_type_trans(struct sk_buff *skb,
-					 struct net_device *dev)
+static __be16 farsync_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	skb->dev = dev;
 	skb->mac.raw = skb->data;
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 87496843681a..48c03c11cd9a 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -91,8 +91,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type,
 
 
 
-static unsigned short cisco_type_trans(struct sk_buff *skb,
-				       struct net_device *dev)
+static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	hdlc_header *data = (hdlc_header*)skb->data;
 
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 7cd6195a2e46..b81263eaede0 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -66,8 +66,7 @@ static void ppp_close(struct net_device *dev)
 
 
 
-static unsigned short ppp_type_trans(struct sk_buff *skb,
-				     struct net_device *dev)
+static __be16 ppp_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	return __constant_htons(ETH_P_WAN_PPP);
 }
diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c
index c41fb70b6929..9456d31cb1c1 100644
--- a/drivers/net/wan/hdlc_raw.c
+++ b/drivers/net/wan/hdlc_raw.c
@@ -24,8 +24,7 @@
 #include <linux/hdlc.h>
 
 
-static unsigned short raw_type_trans(struct sk_buff *skb,
-				     struct net_device *dev)
+static __be16 raw_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	return __constant_htons(ETH_P_IP);
 }
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 3cb88c770037..8f4d2999af8e 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -2210,7 +2210,7 @@ no_mem:
 	return NULL;
 }
 
-static inline unsigned short
+static inline __be16
 qeth_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct qeth_card *card;
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index cf3847edc50f..ce8518e658b6 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -33,7 +33,7 @@ extern int		eth_header(struct sk_buff *skb, struct net_device *dev,
 				   unsigned short type, void *daddr,
 				   void *saddr, unsigned len);
 extern int		eth_rebuild_header(struct sk_buff *skb);
-extern unsigned short	eth_type_trans(struct sk_buff *skb, struct net_device *dev);
+extern __be16		eth_type_trans(struct sk_buff *skb, struct net_device *dev);
 extern void		eth_header_cache_update(struct hh_cache *hh, struct net_device *dev,
 						unsigned char * haddr);
 extern int		eth_header_cache(struct neighbour *neigh,
diff --git a/include/linux/fddidevice.h b/include/linux/fddidevice.h
index 002f6367697d..e61e42dfd317 100644
--- a/include/linux/fddidevice.h
+++ b/include/linux/fddidevice.h
@@ -25,7 +25,7 @@
 #include <linux/if_fddi.h>
 
 #ifdef __KERNEL__
-extern unsigned short	fddi_type_trans(struct sk_buff *skb,
+extern __be16	fddi_type_trans(struct sk_buff *skb,
 				struct net_device *dev);
 extern struct net_device *alloc_fddidev(int sizeof_priv);
 #endif
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index ed2927ef1ff7..df695e9ae327 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -242,8 +242,8 @@ static __inline__ struct net_device_stats *hdlc_stats(struct net_device *dev)
 }
 
 
-static __inline__ unsigned short hdlc_type_trans(struct sk_buff *skb,
-						 struct net_device *dev)
+static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb,
+					 struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 27e4d164a108..2f0c085f2c7d 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -16,6 +16,7 @@
 #define NETLINK_AUDIT		9	/* auditing */
 #define NETLINK_FIB_LOOKUP	10	
 #define NETLINK_ROUTE6		11	/* af_inet6 route comm channel */
+#define NETLINK_NETFILTER	12	/* netfilter subsystem */
 #define NETLINK_IP6_FW		13
 #define NETLINK_DNRTMSG		14	/* DECnet routing messages */
 #define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index 3e89f0f15f49..1b6b76a4eb54 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -516,8 +516,7 @@ struct wan_device {
 /* Public functions available for device drivers */
 extern int register_wan_device(struct wan_device *wandev);
 extern int unregister_wan_device(char *name);
-unsigned short wanrouter_type_trans(struct sk_buff *skb,
-				    struct net_device *dev);
+__be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev);
 int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev,
 			  unsigned short type);
 
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index ef2738159ab3..4a26adfaed71 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -125,7 +125,8 @@
  */
 extern struct sock *sctp_get_ctl_sock(void);
 extern int sctp_copy_local_addr_list(struct sctp_bind_addr *,
-				     sctp_scope_t, int gfp, int flags);
+				     sctp_scope_t, unsigned int __nocast gfp,
+				     int flags);
 extern struct sctp_pf *sctp_get_pf_specific(sa_family_t family);
 extern int sctp_register_pf(struct sctp_pf *, sa_family_t);
 
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 88d9fe5975d5..58462164d960 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -181,17 +181,17 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t,
 int sctp_chunk_iif(const struct sctp_chunk *);
 struct sctp_association *sctp_make_temp_asoc(const struct sctp_endpoint *,
 					     struct sctp_chunk *,
-					     int gfp);
+					     unsigned int __nocast gfp);
 __u32 sctp_generate_verification_tag(void);
 void sctp_populate_tie_tags(__u8 *cookie, __u32 curTag, __u32 hisTag);
 
 /* Prototypes for chunk-building functions.  */
 struct sctp_chunk *sctp_make_init(const struct sctp_association *,
 			     const struct sctp_bind_addr *,
-			     int gfp, int vparam_len);
+			     unsigned int __nocast gfp, int vparam_len);
 struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *,
 				 const struct sctp_chunk *,
-				 const int gfp,
+				 const unsigned int __nocast gfp,
 				 const int unkparam_len);
 struct sctp_chunk *sctp_make_cookie_echo(const struct sctp_association *,
 				    const struct sctp_chunk *);
@@ -265,7 +265,7 @@ int sctp_do_sm(sctp_event_t event_type, sctp_subtype_t subtype,
                struct sctp_endpoint *,
                struct sctp_association *asoc,
                void *event_arg,
-               int gfp);
+	       unsigned int __nocast gfp);
 
 /* 2nd level prototypes */
 void sctp_generate_t3_rtx_event(unsigned long peer);
@@ -275,7 +275,8 @@ void sctp_ootb_pkt_free(struct sctp_packet *);
 
 struct sctp_association *sctp_unpack_cookie(const struct sctp_endpoint *,
 				       const struct sctp_association *,
-				       struct sctp_chunk *, int gfp, int *err,
+				       struct sctp_chunk *,
+				       unsigned int __nocast gfp, int *err,
 				       struct sctp_chunk **err_chk_p);
 int sctp_addip_addr_config(struct sctp_association *, sctp_param_t,
 			   struct sockaddr_storage*, int);
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 7435528a1747..994009bbe3b4 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -445,7 +445,8 @@ struct sctp_ssnmap {
 	int malloced;
 };
 
-struct sctp_ssnmap *sctp_ssnmap_new(__u16 in, __u16 out, int gfp);
+struct sctp_ssnmap *sctp_ssnmap_new(__u16 in, __u16 out,
+				    unsigned int __nocast gfp);
 void sctp_ssnmap_free(struct sctp_ssnmap *map);
 void sctp_ssnmap_clear(struct sctp_ssnmap *map);
 
@@ -945,7 +946,8 @@ struct sctp_transport {
 	} cacc;
 };
 
-struct sctp_transport *sctp_transport_new(const union sctp_addr *, int);
+struct sctp_transport *sctp_transport_new(const union sctp_addr *,
+					  unsigned int __nocast);
 void sctp_transport_set_owner(struct sctp_transport *,
 			      struct sctp_association *);
 void sctp_transport_route(struct sctp_transport *, union sctp_addr *,
@@ -1093,9 +1095,10 @@ void sctp_bind_addr_init(struct sctp_bind_addr *, __u16 port);
 void sctp_bind_addr_free(struct sctp_bind_addr *);
 int sctp_bind_addr_copy(struct sctp_bind_addr *dest,
 			const struct sctp_bind_addr *src,
-			sctp_scope_t scope, int gfp,int flags);
+			sctp_scope_t scope, unsigned int __nocast gfp,
+			int flags);
 int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *,
-		       int gfp);
+		       unsigned int __nocast gfp);
 int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *);
 int sctp_bind_addr_match(struct sctp_bind_addr *, const union sctp_addr *,
 			 struct sctp_sock *);
@@ -1104,9 +1107,10 @@ union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr	*bp,
 					int			addrcnt,
 					struct sctp_sock	*opt);
 union sctp_params sctp_bind_addrs_to_raw(const struct sctp_bind_addr *bp,
-					 int *addrs_len, int gfp);
+					 int *addrs_len,
+					 unsigned int __nocast gfp);
 int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw, int len,
-			   __u16 port, int gfp);
+			   __u16 port, unsigned int __nocast gfp);
 
 sctp_scope_t sctp_scope(const union sctp_addr *);
 int sctp_in_scope(const union sctp_addr *addr, const sctp_scope_t scope);
@@ -1235,7 +1239,7 @@ static inline struct sctp_endpoint *sctp_ep(struct sctp_ep_common *base)
 }
 
 /* These are function signatures for manipulating endpoints.  */
-struct sctp_endpoint *sctp_endpoint_new(struct sock *, int);
+struct sctp_endpoint *sctp_endpoint_new(struct sock *, unsigned int __nocast);
 void sctp_endpoint_free(struct sctp_endpoint *);
 void sctp_endpoint_put(struct sctp_endpoint *);
 void sctp_endpoint_hold(struct sctp_endpoint *);
@@ -1256,7 +1260,7 @@ int sctp_verify_init(const struct sctp_association *asoc, sctp_cid_t,
 		     struct sctp_chunk **err_chunk);
 int sctp_process_init(struct sctp_association *, sctp_cid_t cid,
 		      const union sctp_addr *peer,
-		      sctp_init_chunk_t *init, int gfp);
+		      sctp_init_chunk_t *init, unsigned int __nocast gfp);
 __u32 sctp_generate_tag(const struct sctp_endpoint *);
 __u32 sctp_generate_tsn(const struct sctp_endpoint *);
 
@@ -1719,7 +1723,7 @@ static inline struct sctp_association *sctp_assoc(struct sctp_ep_common *base)
 
 struct sctp_association *
 sctp_association_new(const struct sctp_endpoint *, const struct sock *,
-		     sctp_scope_t scope, int gfp);
+		     sctp_scope_t scope, unsigned int __nocast gfp);
 void sctp_association_free(struct sctp_association *);
 void sctp_association_put(struct sctp_association *);
 void sctp_association_hold(struct sctp_association *);
@@ -1735,7 +1739,7 @@ int sctp_assoc_lookup_laddr(struct sctp_association *asoc,
 			    const union sctp_addr *laddr);
 struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *,
 				     const union sctp_addr *address,
-				     const int gfp,
+				     const unsigned int __nocast gfp,
 				     const int peer_state);
 void sctp_assoc_del_peer(struct sctp_association *asoc,
 			 const union sctp_addr *addr);
@@ -1759,9 +1763,11 @@ void sctp_assoc_rwnd_increase(struct sctp_association *, unsigned);
 void sctp_assoc_rwnd_decrease(struct sctp_association *, unsigned);
 void sctp_assoc_set_primary(struct sctp_association *,
 			    struct sctp_transport *);
-int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *, int);
+int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *,
+				     unsigned int __nocast);
 int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *,
-					 struct sctp_cookie*, int gfp);
+					 struct sctp_cookie*,
+					 unsigned int __nocast gfp);
 
 int sctp_cmp_addr_exact(const union sctp_addr *ss1,
 			const union sctp_addr *ss2);
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
index 1019d83a580a..90fe4bf6754f 100644
--- a/include/net/sctp/ulpevent.h
+++ b/include/net/sctp/ulpevent.h
@@ -88,7 +88,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_assoc_change(
 	__u16 error,
 	__u16 outbound,
 	__u16 inbound,
-	int gfp);
+	unsigned int __nocast gfp);
 
 struct sctp_ulpevent *sctp_ulpevent_make_peer_addr_change(
 	const struct sctp_association *asoc,
@@ -96,35 +96,35 @@ struct sctp_ulpevent *sctp_ulpevent_make_peer_addr_change(
 	int flags,
 	int state,
 	int error,
-	int gfp);
+	unsigned int __nocast gfp);
 
 struct sctp_ulpevent *sctp_ulpevent_make_remote_error(
 	const struct sctp_association *asoc,
 	struct sctp_chunk *chunk,
 	__u16 flags,
-	int gfp);
+	unsigned int __nocast gfp);
 struct sctp_ulpevent *sctp_ulpevent_make_send_failed(
 	const struct sctp_association *asoc,
 	struct sctp_chunk *chunk,
 	__u16 flags,
 	__u32 error,
-	int gfp);
+	unsigned int __nocast gfp);
 
 struct sctp_ulpevent *sctp_ulpevent_make_shutdown_event(
 	const struct sctp_association *asoc,
 	__u16 flags,
-	int gfp);
+	unsigned int __nocast gfp);
 
 struct sctp_ulpevent *sctp_ulpevent_make_pdapi(
 	const struct sctp_association *asoc,
-	__u32 indication, int gfp);
+	__u32 indication, unsigned int __nocast gfp);
 
 struct sctp_ulpevent *sctp_ulpevent_make_adaption_indication(
-	const struct sctp_association *asoc, int gfp);
+	const struct sctp_association *asoc, unsigned int __nocast gfp);
 
 struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc,
 	struct sctp_chunk *chunk,
-	int gfp);
+	unsigned int __nocast gfp);
 
 void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
 	struct msghdr *);
diff --git a/include/net/sctp/ulpqueue.h b/include/net/sctp/ulpqueue.h
index 961736d29d21..1a60c6d943c1 100644
--- a/include/net/sctp/ulpqueue.h
+++ b/include/net/sctp/ulpqueue.h
@@ -62,19 +62,22 @@ struct sctp_ulpq *sctp_ulpq_init(struct sctp_ulpq *,
 void sctp_ulpq_free(struct sctp_ulpq *);
 
 /* Add a new DATA chunk for processing. */
-int sctp_ulpq_tail_data(struct sctp_ulpq *, struct sctp_chunk *, int);
+int sctp_ulpq_tail_data(struct sctp_ulpq *, struct sctp_chunk *,
+			unsigned int __nocast);
 
 /* Add a new event for propagation to the ULP. */
 int sctp_ulpq_tail_event(struct sctp_ulpq *, struct sctp_ulpevent *ev);
 
 /* Renege previously received chunks.  */
-void sctp_ulpq_renege(struct sctp_ulpq *, struct sctp_chunk *, int);
+void sctp_ulpq_renege(struct sctp_ulpq *, struct sctp_chunk *,
+		      unsigned int __nocast);
 
 /* Perform partial delivery. */
-void sctp_ulpq_partial_delivery(struct sctp_ulpq *, struct sctp_chunk *, int);
+void sctp_ulpq_partial_delivery(struct sctp_ulpq *, struct sctp_chunk *,
+				unsigned int __nocast);
 
 /* Abort the partial delivery. */
-void sctp_ulpq_abort_pd(struct sctp_ulpq *, int);
+void sctp_ulpq_abort_pd(struct sctp_ulpq *, unsigned int __nocast);
 
 /* Clear the partial data delivery condition on this socket. */
 int sctp_clear_pd(struct sock *sk);
diff --git a/include/net/x25device.h b/include/net/x25device.h
index cf36a20ea3c5..d45ae883bd1d 100644
--- a/include/net/x25device.h
+++ b/include/net/x25device.h
@@ -5,8 +5,7 @@
 #include <linux/if_packet.h>
 #include <linux/skbuff.h>
 
-static inline unsigned short x25_type_trans(struct sk_buff *skb,
-					    struct net_device *dev)
+static inline __be16 x25_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	skb->mac.raw = skb->data;
 	skb->input_dev = skb->dev = dev;
diff --git a/net/802/fddi.c b/net/802/fddi.c
index ebcf4830d6f1..5ce24c4bb840 100644
--- a/net/802/fddi.c
+++ b/net/802/fddi.c
@@ -122,10 +122,10 @@ static int fddi_rebuild_header(struct sk_buff	*skb)
  * the proper pointer to the start of packet data (skb->data).
  */
  
-unsigned short fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
+__be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct fddihdr *fddi = (struct fddihdr *)skb->data;
-	unsigned short type;
+	__be16 type;
 	
 	/*
 	 * Set mac.raw field to point to FC byte, set data field to point
diff --git a/net/8021q/Kconfig b/net/8021q/Kconfig
new file mode 100644
index 000000000000..c4a382e450e2
--- /dev/null
+++ b/net/8021q/Kconfig
@@ -0,0 +1,19 @@
+#
+# Configuration for 802.1Q VLAN support
+#
+
+config VLAN_8021Q
+	tristate "802.1Q VLAN Support"
+	---help---
+	  Select this and you will be able to create 802.1Q VLAN interfaces
+	  on your ethernet interfaces.  802.1Q VLAN supports almost
+	  everything a regular ethernet interface does, including
+	  firewalling, bridging, and of course IP traffic.  You will need
+	  the 'vconfig' tool from the VLAN project in order to effectively
+	  use VLANs.  See the VLAN web page for more information:
+	  <http://www.candelatech.com/~greear/vlan.html>
+
+	  To compile this code as a module, choose M here: the module
+	  will be called 8021q.
+
+	  If unsure, say N.
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 1f6d31670bc7..91e412b0ab00 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -578,6 +578,14 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 			if (!vlandev)
 				continue;
 
+			if (netif_carrier_ok(dev)) {
+				if (!netif_carrier_ok(vlandev))
+					netif_carrier_on(vlandev);
+			} else {
+				if (netif_carrier_ok(vlandev))
+					netif_carrier_off(vlandev);
+			}
+
 			if ((vlandev->state & VLAN_LINK_STATE_MASK) != flgs) {
 				vlandev->state = (vlandev->state &~ VLAN_LINK_STATE_MASK) 
 					| flgs;
diff --git a/net/Kconfig b/net/Kconfig
index 9251b28e8d5d..2684e809a649 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -2,7 +2,7 @@
 # Network configuration
 #
 
-menu "Networking support"
+menu "Networking"
 
 config NET
 	bool "Networking support"
@@ -10,7 +10,9 @@ config NET
 	  Unless you really know what you are doing, you should say Y here.
 	  The reason is that some programs need kernel networking support even
 	  when running on a stand-alone machine that isn't connected to any
-	  other computer. If you are upgrading from an older kernel, you
+	  other computer.
+	  
+	  If you are upgrading from an older kernel, you
 	  should consider updating your networking tools too because changes
 	  in the kernel and the tools often go hand in hand. The tools are
 	  contained in the package net-tools, the location and version number
@@ -20,57 +22,14 @@ config NET
 	  recommended to read the NET-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-menu "Networking options"
-	depends on NET
-
-config PACKET
-	tristate "Packet socket"
-	---help---
-	  The Packet protocol is used by applications which communicate
-	  directly with network devices without an intermediate network
-	  protocol implemented in the kernel, e.g. tcpdump.  If you want them
-	  to work, choose Y.
+# Make sure that all config symbols are dependent on NET
+if NET
 
-	  To compile this driver as a module, choose M here: the module will
-	  be called af_packet.
-
-	  If unsure, say Y.
-
-config PACKET_MMAP
-	bool "Packet socket: mmapped IO"
-	depends on PACKET
-	help
-	  If you say Y here, the Packet protocol driver will use an IO
-	  mechanism that results in faster communication.
-
-	  If unsure, say N.
-
-config UNIX
-	tristate "Unix domain sockets"
-	---help---
-	  If you say Y here, you will include support for Unix domain sockets;
-	  sockets are the standard Unix mechanism for establishing and
-	  accessing network connections.  Many commonly used programs such as
-	  the X Window system and syslog use these sockets even if your
-	  machine is not connected to any network.  Unless you are working on
-	  an embedded system or something similar, you therefore definitely
-	  want to say Y here.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called unix.  Note that several important services won't work
-	  correctly if you say M here and then neglect to load the module.
-
-	  Say Y unless you know what you are doing.
-
-config NET_KEY
-	tristate "PF_KEY sockets"
-	select XFRM
-	---help---
-	  PF_KEYv2 socket family, compatible to KAME ones.
-	  They are required if you are going to use IPsec tools ported
-	  from KAME.
+menu "Networking options"
 
-	  Say Y unless you know what you are doing.
+source "net/packet/Kconfig"
+source "net/unix/Kconfig"
+source "net/xfrm/Kconfig"
 
 config INET
 	bool "TCP/IP networking"
@@ -94,30 +53,12 @@ config INET
 
 	  Short answer: say Y.
 
+if INET
 source "net/ipv4/Kconfig"
-
-#   IPv6 as module will cause a CRASH if you try to unload it
-config IPV6
-	tristate "The IPv6 protocol"
-	depends on INET
-	default m
-	select CRYPTO if IPV6_PRIVACY
-	select CRYPTO_MD5 if IPV6_PRIVACY
-	---help---
-	  This is complemental support for the IP version 6.
-	  You will still be able to do traditional IPv4 networking as well.
-
-	  For general information about IPv6, see
-	  <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
-	  For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
-	  For specific information about IPv6 under Linux, read the HOWTO at
-	  <http://www.bieringer.de/linux/IPv6/>.
-
-	  To compile this protocol support as a module, choose M here: the 
-	  module will be called ipv6.
-
 source "net/ipv6/Kconfig"
 
+endif # if INET
+
 menuconfig NETFILTER
 	bool "Network packet filtering (replaces ipchains)"
 	---help---
@@ -206,269 +147,16 @@ source "net/bridge/netfilter/Kconfig"
 
 endif
 
-config XFRM
-       bool
-       depends on NET
-
-source "net/xfrm/Kconfig"
-
 source "net/sctp/Kconfig"
-
-config ATM
-	tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	---help---
-	  ATM is a high-speed networking technology for Local Area Networks
-	  and Wide Area Networks.  It uses a fixed packet size and is
-	  connection oriented, allowing for the negotiation of minimum
-	  bandwidth requirements.
-
-	  In order to participate in an ATM network, your Linux box needs an
-	  ATM networking card. If you have that, say Y here and to the driver
-	  of your ATM card below.
-
-	  Note that you need a set of user-space programs to actually make use
-	  of ATM.  See the file <file:Documentation/networking/atm.txt> for
-	  further details.
-
-config ATM_CLIP
-	tristate "Classical IP over ATM (EXPERIMENTAL)"
-	depends on ATM && INET
-	help
-	  Classical IP over ATM for PVCs and SVCs, supporting InARP and
-	  ATMARP. If you want to communication with other IP hosts on your ATM
-	  network, you will typically either say Y here or to "LAN Emulation
-	  (LANE)" below.
-
-config ATM_CLIP_NO_ICMP
-	bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)"
-	depends on ATM_CLIP
-	help
-	  Normally, an "ICMP host unreachable" message is sent if a neighbour
-	  cannot be reached because there is no VC to it in the kernel's
-	  ATMARP table. This may cause problems when ATMARP table entries are
-	  briefly removed during revalidation. If you say Y here, packets to
-	  such neighbours are silently discarded instead.
-
-config ATM_LANE
-	tristate "LAN Emulation (LANE) support (EXPERIMENTAL)"
-	depends on ATM
-	help
-	  LAN Emulation emulates services of existing LANs across an ATM
-	  network. Besides operating as a normal ATM end station client, Linux
-	  LANE client can also act as an proxy client bridging packets between
-	  ELAN and Ethernet segments. You need LANE if you want to try MPOA.
-
-config ATM_MPOA
-	tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)"
-	depends on ATM && INET && ATM_LANE!=n
-	help
-	  Multi-Protocol Over ATM allows ATM edge devices such as routers,
-	  bridges and ATM attached hosts establish direct ATM VCs across
-	  subnetwork boundaries. These shortcut connections bypass routers
-	  enhancing overall network performance.
-
-config ATM_BR2684
-	tristate "RFC1483/2684 Bridged protocols"
-	depends on ATM && INET
-	help
-	  ATM PVCs can carry ethernet PDUs according to rfc2684 (formerly 1483)
-	  This device will act like an ethernet from the kernels point of view,
-	  with the traffic being carried by ATM PVCs (currently 1 PVC/device).
-	  This is sometimes used over DSL lines.  If in doubt, say N.
-
-config ATM_BR2684_IPFILTER
-	bool "Per-VC IP filter kludge"
-	depends on ATM_BR2684
-	help
-	  This is an experimental mechanism for users who need to terminating a
-	  large number of IP-only vcc's.  Do not enable this unless you are sure
-	  you know what you are doing.
-
-config BRIDGE
-	tristate "802.1d Ethernet Bridging"
-	---help---
-	  If you say Y here, then your Linux box will be able to act as an
-	  Ethernet bridge, which means that the different Ethernet segments it
-	  is connected to will appear as one Ethernet to the participants.
-	  Several such bridges can work together to create even larger
-	  networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
-	  As this is a standard, Linux bridges will cooperate properly with
-	  other third party bridge products.
-
-	  In order to use the Ethernet bridge, you'll need the bridge
-	  configuration tools; see <file:Documentation/networking/bridge.txt>
-	  for location. Please read the Bridge mini-HOWTO for more
-	  information.
-
-	  If you enable iptables support along with the bridge support then you
-	  turn your bridge into a bridging IP firewall.
-	  iptables will then see the IP packets being bridged, so you need to
-	  take this into account when setting up your firewall rules.
-	  Enabling arptables support when bridging will let arptables see
-	  bridged ARP traffic in the arptables FORWARD chain.
-
-	  To compile this code as a module, choose M here: the module
-	  will be called bridge.
-
-	  If unsure, say N.
-
-config VLAN_8021Q
-	tristate "802.1Q VLAN Support"
-	---help---
-	  Select this and you will be able to create 802.1Q VLAN interfaces
-	  on your ethernet interfaces.  802.1Q VLAN supports almost
-	  everything a regular ethernet interface does, including
-	  firewalling, bridging, and of course IP traffic.  You will need
-	  the 'vconfig' tool from the VLAN project in order to effectively
-	  use VLANs.  See the VLAN web page for more information:
-	  <http://www.candelatech.com/~greear/vlan.html>
-
-	  To compile this code as a module, choose M here: the module
-	  will be called 8021q.
-
-	  If unsure, say N.
-
-config DECNET
-	tristate "DECnet Support"
-	---help---
-	  The DECnet networking protocol was used in many products made by
-	  Digital (now Compaq).  It provides reliable stream and sequenced
-	  packet communications over which run a variety of services similar
-	  to those which run over TCP/IP.
-
-	  To find some tools to use with the kernel layer support, please
-	  look at Patrick Caulfield's web site:
-	  <http://linux-decnet.sourceforge.net/>.
-
-	  More detailed documentation is available in
-	  <file:Documentation/networking/decnet.txt>.
-
-	  Be sure to say Y to "/proc file system support" and "Sysctl support"
-	  below when using DECnet, since you will need sysctl support to aid
-	  in configuration at run time.
-
-	  The DECnet code is also available as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module is called decnet.
-
+source "net/atm/Kconfig"
+source "net/bridge/Kconfig"
+source "net/8021q/Kconfig"
 source "net/decnet/Kconfig"
-
 source "net/llc/Kconfig"
-
-config IPX
-	tristate "The IPX protocol"
-	select LLC
-	---help---
-	  This is support for the Novell networking protocol, IPX, commonly
-	  used for local networks of Windows machines.  You need it if you
-	  want to access Novell NetWare file or print servers using the Linux
-	  Novell client ncpfs (available from
-	  <ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
-	  within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>).  In order
-	  to do the former, you'll also have to say Y to "NCP file system
-	  support", below.
-
-	  IPX is similar in scope to IP, while SPX, which runs on top of IPX,
-	  is similar to TCP. There is also experimental support for SPX in
-	  Linux (see "SPX networking", below).
-
-	  To turn your Linux box into a fully featured NetWare file server and
-	  IPX router, say Y here and fetch either lwared from
-	  <ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
-	  mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
-	  information, read the IPX-HOWTO available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  General information about how to connect Linux, Windows machines and
-	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-	  The IPX driver would enlarge your kernel by about 16 KB. To compile
-	  this driver as a module, choose M here: the module will be called ipx.
-	  Unless you want to integrate your Linux box with a local Novell
-	  network, say N.
-
 source "net/ipx/Kconfig"
-
-config ATALK
-	tristate "Appletalk protocol support"
-	select LLC
-	---help---
-	  AppleTalk is the protocol that Apple computers can use to communicate
-	  on a network.  If your Linux box is connected to such a network and you
-	  wish to connect to it, say Y.  You will need to use the netatalk package
-	  so that your Linux box can act as a print and file server for Macs as
-	  well as access AppleTalk printers.  Check out
-	  <http://www.zettabyte.net/netatalk/> on the WWW for details.
-	  EtherTalk is the name used for AppleTalk over Ethernet and the
-	  cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
-	  network using serial links.  EtherTalk and LocalTalk are fully
-	  supported by Linux.
-
-	  General information about how to connect Linux, Windows machines and
-	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
-	  NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, contains valuable
-	  information as well.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called appletalk. You almost certainly want to compile it as a
-	  module so you can restart your AppleTalk stack without rebooting
-	  your machine. I hear that the GNU boycott of Apple is over, so
-	  even politically correct people are allowed to say Y here.
-
 source "drivers/net/appletalk/Kconfig"
-
-config X25
-	tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	---help---
-	  X.25 is a set of standardized network protocols, similar in scope to
-	  frame relay; the one physical line from your box to the X.25 network
-	  entry point can carry several logical point-to-point connections
-	  (called "virtual circuits") to other computers connected to the X.25
-	  network. Governments, banks, and other organizations tend to use it
-	  to connect to each other or to form Wide Area Networks (WANs). Many
-	  countries have public X.25 networks. X.25 consists of two
-	  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
-	  if you want that) and the lower level data link layer protocol LAPB
-	  (say Y to "LAPB Data Link Driver" below if you want that).
-
-	  You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
-	  <http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
-	  Information about X.25 for Linux is contained in the files
-	  <file:Documentation/networking/x25.txt> and
-	  <file:Documentation/networking/x25-iface.txt>.
-
-	  One connects to an X.25 network either with a dedicated network card
-	  using the X.21 protocol (not yet supported by Linux) or one can do
-	  X.25 over a standard telephone line using an ordinary modem (say Y
-	  to "X.25 async driver" below) or over Ethernet using an ordinary
-	  Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
-	  Driver" and "LAPB over Ethernet driver" below).
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called x25. If unsure, say N.
-
-config LAPB
-	tristate "LAPB Data Link Driver (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	---help---
-	  Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
-	  the lower) part of the X.25 protocol. It offers a reliable
-	  connection service to exchange data frames with one other host, and
-	  it is used to transport higher level protocols (mostly X.25 Packet
-	  Layer, the higher part of X.25, but others are possible as well).
-	  Usually, LAPB is used with specialized X.21 network cards, but Linux
-	  currently supports LAPB only over Ethernet connections. If you want
-	  to use LAPB connections over Ethernet, say Y here and to "LAPB over
-	  Ethernet driver" below. Read
-	  <file:Documentation/networking/lapb-module.txt> for technical
-	  details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called lapb.  If unsure, say N.
+source "net/x25/Kconfig"
+source "net/lapb/Kconfig"
 
 config NET_DIVERT
 	bool "Frame Diverter (EXPERIMENTAL)"
@@ -496,107 +184,10 @@ config NET_DIVERT
 
 	  If unsure, say N.
 
-config ECONET
-	tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && INET
-	---help---
-	  Econet is a fairly old and slow networking protocol mainly used by
-	  Acorn computers to access file and print servers. It uses native
-	  Econet network cards. AUN is an implementation of the higher level
-	  parts of Econet that runs over ordinary Ethernet connections, on
-	  top of the UDP packet protocol, which in turn runs on top of the
-	  Internet protocol IP.
-
-	  If you say Y here, you can choose with the next two options whether
-	  to send Econet/AUN traffic over a UDP Ethernet connection or over
-	  a native Econet network card.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called econet.
-
-config ECONET_AUNUDP
-	bool "AUN over UDP"
-	depends on ECONET
-	help
-	  Say Y here if you want to send Econet/AUN traffic over a UDP
-	  connection (UDP is a packet based protocol that runs on top of the
-	  Internet protocol IP) using an ordinary Ethernet network card.
-
-config ECONET_NATIVE
-	bool "Native Econet"
-	depends on ECONET
-	help
-	  Say Y here if you have a native Econet network card installed in
-	  your computer.
-
-config WAN_ROUTER
-	tristate "WAN router"
-	depends on EXPERIMENTAL
-	---help---
-	  Wide Area Networks (WANs), such as X.25, frame relay and leased
-	  lines, are used to interconnect Local Area Networks (LANs) over vast
-	  distances with data transfer rates significantly higher than those
-	  achievable with commonly used asynchronous modem connections.
-	  Usually, a quite expensive external device called a `WAN router' is
-	  needed to connect to a WAN.
-
-	  As an alternative, WAN routing can be built into the Linux kernel.
-	  With relatively inexpensive WAN interface cards available on the
-	  market, a perfectly usable router can be built for less than half
-	  the price of an external router.  If you have one of those cards and
-	  wish to use your Linux box as a WAN router, say Y here and also to
-	  the WAN driver for your card, below.  You will then need the
-	  wan-tools package which is available from <ftp://ftp.sangoma.com/>.
-	  Read <file:Documentation/networking/wan-router.txt> for more
-	  information.
-
-	  To compile WAN routing support as a module, choose M here: the
-	  module will be called wanrouter.
-
-	  If unsure, say N.
-
-menu "QoS and/or fair queueing"
-
-config NET_SCHED
-	bool "QoS and/or fair queueing"
-	---help---
-	  When the kernel has several packets to send out over a network
-	  device, it has to decide which ones to send first, which ones to
-	  delay, and which ones to drop. This is the job of the packet
-	  scheduler, and several different algorithms for how to do this
-	  "fairly" have been proposed.
-
-	  If you say N here, you will get the standard packet scheduler, which
-	  is a FIFO (first come, first served). If you say Y here, you will be
-	  able to choose from among several alternative algorithms which can
-	  then be attached to different network devices. This is useful for
-	  example if some of your network devices are real time devices that
-	  need a certain minimum data flow rate, or if you need to limit the
-	  maximum data flow rate for traffic which matches specified criteria.
-	  This code is considered to be experimental.
-
-	  To administer these schedulers, you'll need the user-level utilities
-	  from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
-	  That package also contains some documentation; for more, check out
-	  <http://snafu.freedom.org/linux2.2/iproute-notes.html>.
-
-	  This Quality of Service (QoS) support will enable you to use
-	  Differentiated Services (diffserv) and Resource Reservation Protocol
-	  (RSVP) on your Linux router if you also say Y to "QoS support",
-	  "Packet classifier API" and to some classifiers below. Documentation
-	  and software is at <http://diffserv.sourceforge.net/>.
-
-	  If you say Y here and to "/proc file system" below, you will be able
-	  to read status information about packet schedulers from the file
-	  /proc/net/psched.
-
-	  The available schedulers are listed in the following questions; you
-	  can say Y to as many as you like. If unsure, say N now.
-
+source "net/econet/Kconfig"
+source "net/wanrouter/Kconfig"
 source "net/sched/Kconfig"
 
-endmenu
-
 menu "Network testing"
 
 config NET_PKTGEN
@@ -635,12 +226,9 @@ config NET_POLL_CONTROLLER
 	def_bool NETPOLL
 
 source "net/ax25/Kconfig"
-
 source "net/irda/Kconfig"
-
 source "net/bluetooth/Kconfig"
 
-source "drivers/net/Kconfig"
-
-endmenu
+endif   # if NET
+endmenu # Networking
 
diff --git a/net/atm/Kconfig b/net/atm/Kconfig
new file mode 100644
index 000000000000..bea2426229b1
--- /dev/null
+++ b/net/atm/Kconfig
@@ -0,0 +1,74 @@
+#
+# Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)
+#
+
+config ATM
+	tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  ATM is a high-speed networking technology for Local Area Networks
+	  and Wide Area Networks.  It uses a fixed packet size and is
+	  connection oriented, allowing for the negotiation of minimum
+	  bandwidth requirements.
+
+	  In order to participate in an ATM network, your Linux box needs an
+	  ATM networking card. If you have that, say Y here and to the driver
+	  of your ATM card below.
+
+	  Note that you need a set of user-space programs to actually make use
+	  of ATM.  See the file <file:Documentation/networking/atm.txt> for
+	  further details.
+
+config ATM_CLIP
+	tristate "Classical IP over ATM (EXPERIMENTAL)"
+	depends on ATM && INET
+	help
+	  Classical IP over ATM for PVCs and SVCs, supporting InARP and
+	  ATMARP. If you want to communication with other IP hosts on your ATM
+	  network, you will typically either say Y here or to "LAN Emulation
+	  (LANE)" below.
+
+config ATM_CLIP_NO_ICMP
+	bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)"
+	depends on ATM_CLIP
+	help
+	  Normally, an "ICMP host unreachable" message is sent if a neighbour
+	  cannot be reached because there is no VC to it in the kernel's
+	  ATMARP table. This may cause problems when ATMARP table entries are
+	  briefly removed during revalidation. If you say Y here, packets to
+	  such neighbours are silently discarded instead.
+
+config ATM_LANE
+	tristate "LAN Emulation (LANE) support (EXPERIMENTAL)"
+	depends on ATM
+	help
+	  LAN Emulation emulates services of existing LANs across an ATM
+	  network. Besides operating as a normal ATM end station client, Linux
+	  LANE client can also act as an proxy client bridging packets between
+	  ELAN and Ethernet segments. You need LANE if you want to try MPOA.
+
+config ATM_MPOA
+	tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)"
+	depends on ATM && INET && ATM_LANE!=n
+	help
+	  Multi-Protocol Over ATM allows ATM edge devices such as routers,
+	  bridges and ATM attached hosts establish direct ATM VCs across
+	  subnetwork boundaries. These shortcut connections bypass routers
+	  enhancing overall network performance.
+
+config ATM_BR2684
+	tristate "RFC1483/2684 Bridged protocols"
+	depends on ATM && INET
+	help
+	  ATM PVCs can carry ethernet PDUs according to rfc2684 (formerly 1483)
+	  This device will act like an ethernet from the kernels point of view,
+	  with the traffic being carried by ATM PVCs (currently 1 PVC/device).
+	  This is sometimes used over DSL lines.  If in doubt, say N.
+
+config ATM_BR2684_IPFILTER
+	bool "Per-VC IP filter kludge"
+	depends on ATM_BR2684
+	help
+	  This is an experimental mechanism for users who need to terminating a
+	  large number of IP-only vcc's.  Do not enable this unless you are sure
+	  you know what you are doing.
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index e6954cf1459d..289956c4dd3e 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -289,8 +289,7 @@ xmit will add the additional header part in that case */
  * This is similar to eth_type_trans, which cannot be used because of
  * our dev->hard_header_len
  */
-static inline unsigned short br_type_trans(struct sk_buff *skb,
-					       struct net_device *dev)
+static inline __be16 br_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ethhdr *eth;
 	unsigned char *rawp;
diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig
new file mode 100644
index 000000000000..db23d59746cf
--- /dev/null
+++ b/net/bridge/Kconfig
@@ -0,0 +1,31 @@
+#
+# 802.1d Ethernet Bridging
+#
+
+config BRIDGE
+	tristate "802.1d Ethernet Bridging"
+	---help---
+	  If you say Y here, then your Linux box will be able to act as an
+	  Ethernet bridge, which means that the different Ethernet segments it
+	  is connected to will appear as one Ethernet to the participants.
+	  Several such bridges can work together to create even larger
+	  networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
+	  As this is a standard, Linux bridges will cooperate properly with
+	  other third party bridge products.
+
+	  In order to use the Ethernet bridge, you'll need the bridge
+	  configuration tools; see <file:Documentation/networking/bridge.txt>
+	  for location. Please read the Bridge mini-HOWTO for more
+	  information.
+
+	  If you enable iptables support along with the bridge support then you
+	  turn your bridge into a bridging IP firewall.
+	  iptables will then see the IP packets being bridged, so you need to
+	  take this into account when setting up your firewall rules.
+	  Enabling arptables support when bridging will let arptables see
+	  bridged ARP traffic in the arptables FORWARD chain.
+
+	  To compile this code as a module, choose M here: the module
+	  will be called bridge.
+
+	  If unsure, say N.
diff --git a/net/decnet/Kconfig b/net/decnet/Kconfig
index 2101da542ba8..92f2ec46fd22 100644
--- a/net/decnet/Kconfig
+++ b/net/decnet/Kconfig
@@ -1,6 +1,29 @@
 #
 # DECnet configuration
 #
+config DECNET
+	tristate "DECnet Support"
+	---help---
+	  The DECnet networking protocol was used in many products made by
+	  Digital (now Compaq).  It provides reliable stream and sequenced
+	  packet communications over which run a variety of services similar
+	  to those which run over TCP/IP.
+
+	  To find some tools to use with the kernel layer support, please
+	  look at Patrick Caulfield's web site:
+	  <http://linux-decnet.sourceforge.net/>.
+
+	  More detailed documentation is available in
+	  <file:Documentation/networking/decnet.txt>.
+
+	  Be sure to say Y to "/proc file system support" and "Sysctl support"
+	  below when using DECnet, since you will need sysctl support to aid
+	  in configuration at run time.
+
+	  The DECnet code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called decnet.
+
 config DECNET_ROUTER
 	bool "DECnet: router support (EXPERIMENTAL)"
 	depends on DECNET && EXPERIMENTAL
diff --git a/net/econet/Kconfig b/net/econet/Kconfig
new file mode 100644
index 000000000000..39a2d2975e0e
--- /dev/null
+++ b/net/econet/Kconfig
@@ -0,0 +1,36 @@
+#
+# Acorn Econet/AUN protocols 
+#
+
+config ECONET
+	tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && INET
+	---help---
+	  Econet is a fairly old and slow networking protocol mainly used by
+	  Acorn computers to access file and print servers. It uses native
+	  Econet network cards. AUN is an implementation of the higher level
+	  parts of Econet that runs over ordinary Ethernet connections, on
+	  top of the UDP packet protocol, which in turn runs on top of the
+	  Internet protocol IP.
+
+	  If you say Y here, you can choose with the next two options whether
+	  to send Econet/AUN traffic over a UDP Ethernet connection or over
+	  a native Econet network card.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called econet.
+
+config ECONET_AUNUDP
+	bool "AUN over UDP"
+	depends on ECONET
+	help
+	  Say Y here if you want to send Econet/AUN traffic over a UDP
+	  connection (UDP is a packet based protocol that runs on top of the
+	  Internet protocol IP) using an ordinary Ethernet network card.
+
+config ECONET_NATIVE
+	bool "Native Econet"
+	depends on ECONET
+	help
+	  Say Y here if you have a native Econet network card installed in
+	  your computer.
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index ab60ea63688e..f6dbfb99b14d 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -155,7 +155,7 @@ int eth_rebuild_header(struct sk_buff *skb)
  *	This is normal practice and works for any 'now in use' protocol.
  */
  
-unsigned short eth_type_trans(struct sk_buff *skb, struct net_device *dev)
+__be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ethhdr *eth;
 	unsigned char *rawp;
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 3e63123f7bbd..df5386885a90 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -3,7 +3,6 @@
 #
 config IP_MULTICAST
 	bool "IP: multicasting"
-	depends on INET
 	help
 	  This is code for addressing several networked computers at once,
 	  enlarging your kernel by about 2 KB. You need multicasting if you
@@ -17,7 +16,6 @@ config IP_MULTICAST
 
 config IP_ADVANCED_ROUTER
 	bool "IP: advanced router"
-	depends on INET
 	---help---
 	  If you intend to run your Linux box mostly as a router, i.e. as a
 	  computer that forwards and redistributes network packets, say Y; you
@@ -183,7 +181,6 @@ config IP_ROUTE_VERBOSE
 
 config IP_PNP
 	bool "IP: kernel level autoconfiguration"
-	depends on INET
 	help
 	  This enables automatic configuration of IP addresses of devices and
 	  of the routing table during kernel boot, based on either information
@@ -242,7 +239,6 @@ config IP_PNP_RARP
 #   bool '    IP: ARP support' CONFIG_IP_PNP_ARP		
 config NET_IPIP
 	tristate "IP: tunneling"
-	depends on INET
 	select INET_TUNNEL
 	---help---
 	  Tunneling means encapsulating data of one protocol type within
@@ -260,7 +256,6 @@ config NET_IPIP
 
 config NET_IPGRE
 	tristate "IP: GRE tunnels over IP"
-	depends on INET
 	select XFRM
 	help
 	  Tunneling means encapsulating data of one protocol type within
@@ -319,7 +314,7 @@ config IP_PIMSM_V2
 
 config ARPD
 	bool "IP: ARP daemon support (EXPERIMENTAL)"
-	depends on INET && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	---help---
 	  Normally, the kernel maintains an internal cache which maps IP
 	  addresses to hardware addresses on the local network, so that
@@ -344,7 +339,6 @@ config ARPD
 
 config SYN_COOKIES
 	bool "IP: TCP syncookie support (disabled per default)"
-	depends on INET
 	---help---
 	  Normal TCP/IP networking is open to an attack known as "SYN
 	  flooding". This denial-of-service attack prevents legitimate remote
@@ -381,7 +375,6 @@ config SYN_COOKIES
 
 config INET_AH
 	tristate "IP: AH transformation"
-	depends on INET
 	select XFRM
 	select CRYPTO
 	select CRYPTO_HMAC
@@ -394,7 +387,6 @@ config INET_AH
 
 config INET_ESP
 	tristate "IP: ESP transformation"
-	depends on INET
 	select XFRM
 	select CRYPTO
 	select CRYPTO_HMAC
@@ -408,7 +400,6 @@ config INET_ESP
 
 config INET_IPCOMP
 	tristate "IP: IPComp transformation"
-	depends on INET
 	select XFRM
 	select INET_TUNNEL
 	select CRYPTO
@@ -421,7 +412,6 @@ config INET_IPCOMP
 
 config INET_TUNNEL
 	tristate "IP: tunnel transformation"
-	depends on INET
 	select XFRM
 	---help---
 	  Support for generic IP tunnel transformation, which is required by
@@ -431,7 +421,6 @@ config INET_TUNNEL
 
 config IP_TCPDIAG
 	tristate "IP: TCP socket monitoring interface"
-	depends on INET
 	default y
 	---help---
 	  Support for TCP socket monitoring interface used by native Linux
@@ -447,7 +436,6 @@ config IP_TCPDIAG_IPV6
 
 config TCP_CONG_ADVANCED
 	bool "TCP: advanced congestion control"
-	depends on INET
 	---help---
 	  Support for selection of various TCP congestion control
 	  modules.
@@ -463,7 +451,6 @@ menu "TCP congestion control"
 
 config TCP_CONG_BIC
 	tristate "Binary Increase Congestion (BIC) control"
-	depends on INET
 	default y
 	---help---
 	BIC-TCP is a sender-side only change that ensures a linear RTT
@@ -478,7 +465,6 @@ config TCP_CONG_BIC
 
 config TCP_CONG_WESTWOOD
 	tristate "TCP Westwood+"
-	depends on INET
 	default m
 	---help---
 	TCP Westwood+ is a sender-side only modification of the TCP Reno
@@ -493,7 +479,6 @@ config TCP_CONG_WESTWOOD
 
 config TCP_CONG_HTCP
         tristate "H-TCP"
-	depends on INET
         default m
 	---help---
 	H-TCP is a send-side only modifications of the TCP Reno
@@ -505,7 +490,7 @@ config TCP_CONG_HTCP
 
 config TCP_CONG_HSTCP
 	tristate "High Speed TCP"
-	depends on INET && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	default n
 	---help---
 	Sally Floyd's High Speed TCP (RFC 3649) congestion control.
@@ -516,7 +501,7 @@ config TCP_CONG_HSTCP
 
 config TCP_CONG_HYBLA
 	tristate "TCP-Hybla congestion control algorithm"
-	depends on INET && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	default n
 	---help---
 	TCP-Hybla is a sender-side only change that eliminates penalization of
@@ -526,7 +511,7 @@ config TCP_CONG_HYBLA
 
 config TCP_CONG_VEGAS
 	tristate "TCP Vegas"
-	depends on INET && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	default n
 	---help---
 	TCP Vegas is a sender-side only change to TCP that anticipates
@@ -537,7 +522,7 @@ config TCP_CONG_VEGAS
 
 config TCP_CONG_SCALABLE
 	tristate "Scalable TCP"
-	depends on INET && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	default n
 	---help---
 	Scalable TCP is a sender-side only change to TCP which uses a
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 9de83e6e0f1d..80d13103b2b0 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -107,7 +107,6 @@ static int ip_dev_loopback_xmit(struct sk_buff *newskb)
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
 	BUG_TRAP(newskb->dst);
-	nf_reset(newskb);
 	netif_rx(newskb);
 	return 0;
 }
@@ -188,14 +187,6 @@ static inline int ip_finish_output2(struct sk_buff *skb)
 		skb = skb2;
 	}
 
-#ifdef CONFIG_BRIDGE_NETFILTER
-	/* bridge-netfilter defers calling some IP hooks to the bridge layer
-	 * and still needs the conntrack reference.
-	 */
-	if (skb->nf_bridge == NULL)
-#endif
-		nf_reset(skb);
-
 	if (hh) {
 		int hh_alen;
 
diff --git a/net/ipv4/ipvs/Kconfig b/net/ipv4/ipvs/Kconfig
index 63a82b4b64bb..c9820bfc493a 100644
--- a/net/ipv4/ipvs/Kconfig
+++ b/net/ipv4/ipvs/Kconfig
@@ -2,11 +2,11 @@
 # IP Virtual Server configuration
 #
 menu	"IP: Virtual Server Configuration"
-	depends on INET && NETFILTER
+	depends on NETFILTER
 
 config	IP_VS
 	tristate "IP virtual server support (EXPERIMENTAL)"
-	depends on INET && NETFILTER
+	depends on NETFILTER
 	---help---
 	  IP Virtual Server support will let you build a high-performance
 	  virtual server based on cluster of two or more real servers. This
diff --git a/net/ipv4/ipvs/ip_vs_conn.c b/net/ipv4/ipvs/ip_vs_conn.c
index 9f16ab309106..d0145a8b1551 100644
--- a/net/ipv4/ipvs/ip_vs_conn.c
+++ b/net/ipv4/ipvs/ip_vs_conn.c
@@ -758,7 +758,7 @@ static inline int todrop_entry(struct ip_vs_conn *cp)
 	return 1;
 }
 
-
+/* Called from keventd and must protect itself from softirqs */
 void ip_vs_random_dropentry(void)
 {
 	int idx;
@@ -773,7 +773,7 @@ void ip_vs_random_dropentry(void)
 		/*
 		 *  Lock is actually needed in this loop.
 		 */
-		ct_write_lock(hash);
+		ct_write_lock_bh(hash);
 
 		list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
 			if (!cp->cport && !(cp->flags & IP_VS_CONN_F_NO_CPORT))
@@ -806,7 +806,7 @@ void ip_vs_random_dropentry(void)
 				ip_vs_conn_expire_now(cp->control);
 			}
 		}
-		ct_write_unlock(hash);
+		ct_write_unlock_bh(hash);
 	}
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c
index 12a82e91d22a..7d99ede2ef79 100644
--- a/net/ipv4/ipvs/ip_vs_ctl.c
+++ b/net/ipv4/ipvs/ip_vs_ctl.c
@@ -90,7 +90,8 @@ int ip_vs_get_debug_level(void)
 #endif
 
 /*
- *	update_defense_level is called from keventd and from sysctl.
+ *	update_defense_level is called from keventd and from sysctl,
+ *	so it needs to protect itself from softirqs
  */
 static void update_defense_level(void)
 {
@@ -110,6 +111,8 @@ static void update_defense_level(void)
 
 	nomem = (availmem < sysctl_ip_vs_amemthresh);
 
+	local_bh_disable();
+
 	/* drop_entry */
 	spin_lock(&__ip_vs_dropentry_lock);
 	switch (sysctl_ip_vs_drop_entry) {
@@ -206,6 +209,8 @@ static void update_defense_level(void)
 	if (to_change >= 0)
 		ip_vs_protocol_timeout_change(sysctl_ip_vs_secure_tcp>1);
 	write_unlock(&__ip_vs_securetcp_lock);
+
+	local_bh_enable();
 }
 
 
@@ -1360,9 +1365,7 @@ proc_do_defense_mode(ctl_table *table, int write, struct file * filp,
 			/* Restore the correct value */
 			*valp = val;
 		} else {
-			local_bh_disable();
 			update_defense_level();
-			local_bh_enable();
 		}
 	}
 	return rc;
diff --git a/net/ipv4/netfilter/ip_conntrack_standalone.c b/net/ipv4/netfilter/ip_conntrack_standalone.c
index 42dc95102873..1dd824f3cf0a 100644
--- a/net/ipv4/netfilter/ip_conntrack_standalone.c
+++ b/net/ipv4/netfilter/ip_conntrack_standalone.c
@@ -432,6 +432,13 @@ static unsigned int ip_conntrack_defrag(unsigned int hooknum,
 				        const struct net_device *out,
 				        int (*okfn)(struct sk_buff *))
 {
+#if !defined(CONFIG_IP_NF_NAT) && !defined(CONFIG_IP_NF_NAT_MODULE)
+	/* Previously seen (loopback)?  Ignore.  Do this before
+           fragment check. */
+	if ((*pskb)->nfct)
+		return NF_ACCEPT;
+#endif
+
 	/* Gather fragments. */
 	if ((*pskb)->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
 		*pskb = ip_ct_gather_frags(*pskb,
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 726ea5e8180a..d675ff80b04d 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1685,7 +1685,7 @@ static void ip_handle_martian_source(struct net_device *dev,
 		printk(KERN_WARNING "martian source %u.%u.%u.%u from "
 			"%u.%u.%u.%u, on dev %s\n",
 			NIPQUAD(daddr), NIPQUAD(saddr), dev->name);
-		if (dev->hard_header_len) {
+		if (dev->hard_header_len && skb->mac.raw) {
 			int i;
 			unsigned char *p = skb->mac.raw;
 			printk(KERN_WARNING "ll header: ");
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index e66ca9381cfd..95163cd52ae0 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -1,6 +1,26 @@
 #
 # IPv6 configuration
-# 
+#
+
+#   IPv6 as module will cause a CRASH if you try to unload it
+config IPV6
+	tristate "The IPv6 protocol"
+	default m
+	select CRYPTO if IPV6_PRIVACY
+	select CRYPTO_MD5 if IPV6_PRIVACY
+	---help---
+	  This is complemental support for the IP version 6.
+	  You will still be able to do traditional IPv4 networking as well.
+
+	  For general information about IPv6, see
+	  <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
+	  For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
+	  For specific information about IPv6 under Linux, read the HOWTO at
+	  <http://www.bieringer.de/linux/IPv6/>.
+
+	  To compile this protocol support as a module, choose M here: the 
+	  module will be called ipv6.
+
 config IPV6_PRIVACY
 	bool "IPv6: Privacy Extensions (RFC 3041) support"
 	depends on IPV6
diff --git a/net/ipx/Kconfig b/net/ipx/Kconfig
index a16237c0e783..980a826f5d02 100644
--- a/net/ipx/Kconfig
+++ b/net/ipx/Kconfig
@@ -1,6 +1,39 @@
 #
 # IPX configuration
 #
+config IPX
+	tristate "The IPX protocol"
+	select LLC
+	---help---
+	  This is support for the Novell networking protocol, IPX, commonly
+	  used for local networks of Windows machines.  You need it if you
+	  want to access Novell NetWare file or print servers using the Linux
+	  Novell client ncpfs (available from
+	  <ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
+	  within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>).  In order
+	  to do the former, you'll also have to say Y to "NCP file system
+	  support", below.
+
+	  IPX is similar in scope to IP, while SPX, which runs on top of IPX,
+	  is similar to TCP. There is also experimental support for SPX in
+	  Linux (see "SPX networking", below).
+
+	  To turn your Linux box into a fully featured NetWare file server and
+	  IPX router, say Y here and fetch either lwared from
+	  <ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
+	  mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
+	  information, read the IPX-HOWTO available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  The IPX driver would enlarge your kernel by about 16 KB. To compile
+	  this driver as a module, choose M here: the module will be called ipx.
+	  Unless you want to integrate your Linux box with a local Novell
+	  network, say N.
+
 config IPX_INTERN
 	bool "IPX: Full internal IPX network"
 	depends on IPX
diff --git a/net/lapb/Kconfig b/net/lapb/Kconfig
new file mode 100644
index 000000000000..f0b5efb31a00
--- /dev/null
+++ b/net/lapb/Kconfig
@@ -0,0 +1,22 @@
+#
+# LAPB Data Link Drive
+#
+
+config LAPB
+	tristate "LAPB Data Link Driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
+	  the lower) part of the X.25 protocol. It offers a reliable
+	  connection service to exchange data frames with one other host, and
+	  it is used to transport higher level protocols (mostly X.25 Packet
+	  Layer, the higher part of X.25, but others are possible as well).
+	  Usually, LAPB is used with specialized X.21 network cards, but Linux
+	  currently supports LAPB only over Ethernet connections. If you want
+	  to use LAPB connections over Ethernet, say Y here and to "LAPB over
+	  Ethernet driver" below. Read
+	  <file:Documentation/networking/lapb-module.txt> for technical
+	  details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lapb.  If unsure, say N.
diff --git a/net/packet/Kconfig b/net/packet/Kconfig
new file mode 100644
index 000000000000..34ff93ff894d
--- /dev/null
+++ b/net/packet/Kconfig
@@ -0,0 +1,26 @@
+#
+# Packet configuration
+#
+
+config PACKET
+	tristate "Packet socket"
+	---help---
+	  The Packet protocol is used by applications which communicate
+	  directly with network devices without an intermediate network
+	  protocol implemented in the kernel, e.g. tcpdump.  If you want them
+	  to work, choose Y.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called af_packet.
+
+	  If unsure, say Y.
+
+config PACKET_MMAP
+	bool "Packet socket: mmapped IO"
+	depends on PACKET
+	help
+	  If you say Y here, the Packet protocol driver will use an IO
+	  mechanism that results in faster communication.
+
+	  If unsure, say N.
+
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 0269616e75a1..c9d5980aa4de 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -274,6 +274,9 @@ static int packet_rcv_spkt(struct sk_buff *skb, struct net_device *dev,  struct
 	dst_release(skb->dst);
 	skb->dst = NULL;
 
+	/* drop conntrack reference */
+	nf_reset(skb);
+
 	spkt = (struct sockaddr_pkt*)skb->cb;
 
 	skb_push(skb, skb->data-skb->mac.raw);
@@ -517,6 +520,9 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev,  struct packe
 	dst_release(skb->dst);
 	skb->dst = NULL;
 
+	/* drop conntrack reference */
+	nf_reset(skb);
+
 	spin_lock(&sk->sk_receive_queue.lock);
 	po->stats.tp_packets++;
 	__skb_queue_tail(&sk->sk_receive_queue, skb);
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index 7bac249258e3..59d3e71f8b85 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -1,6 +1,43 @@
 #
 # Traffic control configuration.
 # 
+
+menuconfig NET_SCHED
+	bool "QoS and/or fair queueing"
+	---help---
+	  When the kernel has several packets to send out over a network
+	  device, it has to decide which ones to send first, which ones to
+	  delay, and which ones to drop. This is the job of the packet
+	  scheduler, and several different algorithms for how to do this
+	  "fairly" have been proposed.
+
+	  If you say N here, you will get the standard packet scheduler, which
+	  is a FIFO (first come, first served). If you say Y here, you will be
+	  able to choose from among several alternative algorithms which can
+	  then be attached to different network devices. This is useful for
+	  example if some of your network devices are real time devices that
+	  need a certain minimum data flow rate, or if you need to limit the
+	  maximum data flow rate for traffic which matches specified criteria.
+	  This code is considered to be experimental.
+
+	  To administer these schedulers, you'll need the user-level utilities
+	  from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
+	  That package also contains some documentation; for more, check out
+	  <http://snafu.freedom.org/linux2.2/iproute-notes.html>.
+
+	  This Quality of Service (QoS) support will enable you to use
+	  Differentiated Services (diffserv) and Resource Reservation Protocol
+	  (RSVP) on your Linux router if you also say Y to "QoS support",
+	  "Packet classifier API" and to some classifiers below. Documentation
+	  and software is at <http://diffserv.sourceforge.net/>.
+
+	  If you say Y here and to "/proc file system" below, you will be able
+	  to read status information about packet schedulers from the file
+	  /proc/net/psched.
+
+	  The available schedulers are listed in the following questions; you
+	  can say Y to as many as you like. If unsure, say N now.
+
 choice
 	prompt "Packet scheduler clock source"
 	depends on NET_SCHED
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 4b47dd6f2485..5b24ae0650d3 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -71,7 +71,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
 					  const struct sctp_endpoint *ep,
 					  const struct sock *sk,
 					  sctp_scope_t scope,
-					  int gfp)
+					  unsigned int __nocast gfp)
 {
 	struct sctp_sock *sp;
 	int i;
@@ -272,7 +272,8 @@ fail_init:
 /* Allocate and initialize a new association */
 struct sctp_association *sctp_association_new(const struct sctp_endpoint *ep,
 					 const struct sock *sk,
-					 sctp_scope_t scope, int gfp)
+					 sctp_scope_t scope,
+					 unsigned int __nocast gfp)
 {
 	struct sctp_association *asoc;
 
@@ -478,7 +479,7 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
 /* Add a transport address to an association.  */
 struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc,
 					   const union sctp_addr *addr,
-					   const int gfp,
+					   const unsigned int __nocast gfp,
 					   const int peer_state)
 {
 	struct sctp_transport *peer;
@@ -1229,7 +1230,8 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned len)
 /* Build the bind address list for the association based on info from the
  * local endpoint and the remote peer.
  */
-int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, int gfp)
+int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc,
+				     unsigned int __nocast gfp)
 {
 	sctp_scope_t scope;
 	int flags;
@@ -1251,7 +1253,8 @@ int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, int gfp)
 
 /* Build the association's bind address list from the cookie.  */
 int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *asoc,
-					 struct sctp_cookie *cookie, int gfp)
+					 struct sctp_cookie *cookie,
+					 unsigned int __nocast gfp)
 {
 	int var_size2 = ntohs(cookie->peer_init->chunk_hdr.length);
 	int var_size3 = cookie->raw_addr_list_len;
diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c
index f90eadfb60a2..f71549710f2e 100644
--- a/net/sctp/bind_addr.c
+++ b/net/sctp/bind_addr.c
@@ -53,7 +53,8 @@
 
 /* Forward declarations for internal helpers. */
 static int sctp_copy_one_addr(struct sctp_bind_addr *, union sctp_addr *,
-			      sctp_scope_t scope, int gfp, int flags);
+			      sctp_scope_t scope, unsigned int __nocast gfp,
+			      int flags);
 static void sctp_bind_addr_clean(struct sctp_bind_addr *);
 
 /* First Level Abstractions. */
@@ -63,7 +64,8 @@ static void sctp_bind_addr_clean(struct sctp_bind_addr *);
  */
 int sctp_bind_addr_copy(struct sctp_bind_addr *dest, 
 			const struct sctp_bind_addr *src,
-			sctp_scope_t scope, int gfp, int flags)
+			sctp_scope_t scope, unsigned int __nocast gfp,
+			int flags)
 {
 	struct sctp_sockaddr_entry *addr;
 	struct list_head *pos;
@@ -144,7 +146,7 @@ void sctp_bind_addr_free(struct sctp_bind_addr *bp)
 
 /* Add an address to the bind address list in the SCTP_bind_addr structure. */
 int sctp_add_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *new,
-		       int gfp)
+		       unsigned int __nocast gfp)
 {
 	struct sctp_sockaddr_entry *addr;
 
@@ -197,7 +199,8 @@ int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr)
  * The second argument is the return value for the length.
  */
 union sctp_params sctp_bind_addrs_to_raw(const struct sctp_bind_addr *bp,
-					 int *addrs_len, int gfp)
+					 int *addrs_len,
+					 unsigned int __nocast gfp)
 {
 	union sctp_params addrparms;
 	union sctp_params retval;
@@ -249,7 +252,7 @@ end_raw:
  * address parameters).
  */
 int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw_addr_list,
-			   int addrs_len, __u16 port, int gfp)
+			   int addrs_len, __u16 port, unsigned int __nocast gfp)
 {
 	union sctp_addr_param *rawaddr;
 	struct sctp_paramhdr *param;
@@ -347,7 +350,8 @@ union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr	*bp,
 /* Copy out addresses from the global local address list. */
 static int sctp_copy_one_addr(struct sctp_bind_addr *dest, 
 			      union sctp_addr *addr,
-			      sctp_scope_t scope, int gfp, int flags)
+			      sctp_scope_t scope, unsigned int __nocast gfp,
+			      int flags)
 {
 	int error = 0;
 
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 0c2ab7885058..61da2937e641 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -62,7 +62,7 @@ static void sctp_datamsg_init(struct sctp_datamsg *msg)
 }
 
 /* Allocate and initialize datamsg. */
-SCTP_STATIC struct sctp_datamsg *sctp_datamsg_new(int gfp)
+SCTP_STATIC struct sctp_datamsg *sctp_datamsg_new(unsigned int __nocast gfp)
 {
 	struct sctp_datamsg *msg;
 	msg = kmalloc(sizeof(struct sctp_datamsg), gfp);
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index c44bf4165c6e..e47ac0d1a6d6 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -67,7 +67,8 @@ static void sctp_endpoint_bh_rcv(struct sctp_endpoint *ep);
  * Initialize the base fields of the endpoint structure.
  */
 static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
-						struct sock *sk, int gfp)
+						struct sock *sk,
+						unsigned int __nocast gfp)
 {
 	struct sctp_sock *sp = sctp_sk(sk);
 	memset(ep, 0, sizeof(struct sctp_endpoint));
@@ -137,7 +138,8 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 /* Create a sctp_endpoint with all that boring stuff initialized.
  * Returns NULL if there isn't enough memory.
  */
-struct sctp_endpoint *sctp_endpoint_new(struct sock *sk, int gfp)
+struct sctp_endpoint *sctp_endpoint_new(struct sock *sk,
+					unsigned int __nocast gfp)
 {
 	struct sctp_endpoint *ep;
 
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index e7f37faba7c0..ce9245e71fca 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -219,7 +219,7 @@ static void sctp_free_local_addr_list(void)
 
 /* Copy the local addresses which are valid for 'scope' into 'bp'.  */
 int sctp_copy_local_addr_list(struct sctp_bind_addr *bp, sctp_scope_t scope,
-			      int gfp, int copy_flags)
+			      unsigned int __nocast gfp, int copy_flags)
 {
 	struct sctp_sockaddr_entry *addr;
 	int error = 0;
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 773cd93fa3d0..00d32b7c8266 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -78,7 +78,7 @@ static sctp_cookie_param_t *sctp_pack_cookie(const struct sctp_endpoint *ep,
 static int sctp_process_param(struct sctp_association *asoc,
 			      union sctp_params param,
 			      const union sctp_addr *peer_addr,
-			      int gfp);
+			      unsigned int __nocast gfp);
 
 /* What was the inbound interface for this chunk? */
 int sctp_chunk_iif(const struct sctp_chunk *chunk)
@@ -174,7 +174,7 @@ void  sctp_init_cause(struct sctp_chunk *chunk, __u16 cause_code,
  */
 struct sctp_chunk *sctp_make_init(const struct sctp_association *asoc,
 			     const struct sctp_bind_addr *bp,
-			     int gfp, int vparam_len)
+			     unsigned int __nocast gfp, int vparam_len)
 {
 	sctp_inithdr_t init;
 	union sctp_params addrs;
@@ -261,7 +261,7 @@ nodata:
 
 struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *asoc,
 				 const struct sctp_chunk *chunk,
-				 int gfp, int unkparam_len)
+				 unsigned int __nocast gfp, int unkparam_len)
 {
 	sctp_inithdr_t initack;
 	struct sctp_chunk *retval;
@@ -1233,7 +1233,8 @@ void sctp_chunk_assign_tsn(struct sctp_chunk *chunk)
 
 /* Create a CLOSED association to use with an incoming packet.  */
 struct sctp_association *sctp_make_temp_asoc(const struct sctp_endpoint *ep,
-					struct sctp_chunk *chunk, int gfp)
+					struct sctp_chunk *chunk,
+					unsigned int __nocast gfp)
 {
 	struct sctp_association *asoc;
 	struct sk_buff *skb;
@@ -1348,7 +1349,7 @@ nodata:
 struct sctp_association *sctp_unpack_cookie(
 	const struct sctp_endpoint *ep,
 	const struct sctp_association *asoc,
-	struct sctp_chunk *chunk, int gfp,
+	struct sctp_chunk *chunk, unsigned int __nocast gfp,
 	int *error, struct sctp_chunk **errp)
 {
 	struct sctp_association *retval = NULL;
@@ -1812,7 +1813,7 @@ int sctp_verify_init(const struct sctp_association *asoc,
  */
 int sctp_process_init(struct sctp_association *asoc, sctp_cid_t cid,
 		      const union sctp_addr *peer_addr,
-		      sctp_init_chunk_t *peer_init, int gfp)
+		      sctp_init_chunk_t *peer_init, unsigned int __nocast gfp)
 {
 	union sctp_params param;
 	struct sctp_transport *transport;
@@ -1983,7 +1984,7 @@ nomem:
 static int sctp_process_param(struct sctp_association *asoc,
 			      union sctp_params param,
 			      const union sctp_addr *peer_addr,
-			      int gfp)
+			      unsigned int __nocast gfp)
 {
 	union sctp_addr addr;
 	int i;
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 778639db125a..39c970b5b198 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -63,7 +63,7 @@ static int sctp_cmd_interpreter(sctp_event_t event_type,
 				void *event_arg,
 			 	sctp_disposition_t status,
 				sctp_cmd_seq_t *commands,
-				int gfp);
+				unsigned int __nocast gfp);
 static int sctp_side_effects(sctp_event_t event_type, sctp_subtype_t subtype,
 			     sctp_state_t state,
 			     struct sctp_endpoint *ep,
@@ -71,7 +71,7 @@ static int sctp_side_effects(sctp_event_t event_type, sctp_subtype_t subtype,
 			     void *event_arg,
 			     sctp_disposition_t status,
 			     sctp_cmd_seq_t *commands,
-			     int gfp);
+			     unsigned int __nocast gfp);
 
 /********************************************************************
  * Helper functions
@@ -497,7 +497,8 @@ static void sctp_cmd_assoc_failed(sctp_cmd_seq_t *commands,
 static int sctp_cmd_process_init(sctp_cmd_seq_t *commands,
 				 struct sctp_association *asoc,
 				 struct sctp_chunk *chunk,
-				 sctp_init_chunk_t *peer_init, int gfp)
+				 sctp_init_chunk_t *peer_init,
+				 unsigned int __nocast gfp)
 {
 	int error;
 
@@ -852,7 +853,7 @@ int sctp_do_sm(sctp_event_t event_type, sctp_subtype_t subtype,
 	       struct sctp_endpoint *ep,
 	       struct sctp_association *asoc,
 	       void *event_arg,
-	       int gfp)
+	       unsigned int __nocast gfp)
 {
 	sctp_cmd_seq_t commands;
 	const sctp_sm_table_entry_t *state_fn;
@@ -897,7 +898,7 @@ static int sctp_side_effects(sctp_event_t event_type, sctp_subtype_t subtype,
 			     void *event_arg,
 			     sctp_disposition_t status,
 			     sctp_cmd_seq_t *commands,
-			     int gfp)
+			     unsigned int __nocast gfp)
 {
 	int error;
 
@@ -985,7 +986,7 @@ static int sctp_cmd_interpreter(sctp_event_t event_type,
 				void *event_arg,
 			 	sctp_disposition_t status,
 				sctp_cmd_seq_t *commands,
-				int gfp)
+				unsigned int __nocast gfp)
 {
 	int error = 0;
 	int force;
diff --git a/net/sctp/ssnmap.c b/net/sctp/ssnmap.c
index e627d2b451b6..25037daf3fa0 100644
--- a/net/sctp/ssnmap.c
+++ b/net/sctp/ssnmap.c
@@ -57,7 +57,8 @@ static inline size_t sctp_ssnmap_size(__u16 in, __u16 out)
 /* Create a new sctp_ssnmap.
  * Allocate room to store at least 'len' contiguous TSNs.
  */
-struct sctp_ssnmap *sctp_ssnmap_new(__u16 in, __u16 out, int gfp)
+struct sctp_ssnmap *sctp_ssnmap_new(__u16 in, __u16 out,
+				    unsigned int __nocast gfp)
 {
 	struct sctp_ssnmap *retval;
 	int size;
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index a63b69179607..d2f04ebe5081 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -57,7 +57,7 @@
 /* Initialize a new transport from provided memory.  */
 static struct sctp_transport *sctp_transport_init(struct sctp_transport *peer,
 						  const union sctp_addr *addr,
-						  int gfp)
+						  unsigned int __nocast gfp)
 {
 	/* Copy in the address.  */
 	peer->ipaddr = *addr;
@@ -121,7 +121,8 @@ static struct sctp_transport *sctp_transport_init(struct sctp_transport *peer,
 }
 
 /* Allocate and initialize a new transport.  */
-struct sctp_transport *sctp_transport_new(const union sctp_addr *addr, int gfp)
+struct sctp_transport *sctp_transport_new(const union sctp_addr *addr,
+					  unsigned int __nocast gfp)
 {
         struct sctp_transport *transport;
 
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 17d0ff534735..0abd5101107c 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -74,7 +74,7 @@ SCTP_STATIC void sctp_ulpevent_init(struct sctp_ulpevent *event, int msg_flags)
 
 /* Create a new sctp_ulpevent.  */
 SCTP_STATIC struct sctp_ulpevent *sctp_ulpevent_new(int size, int msg_flags,
-						    int gfp)
+						    unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sk_buff *skb;
@@ -136,7 +136,7 @@ static inline void sctp_ulpevent_release_owner(struct sctp_ulpevent *event)
 struct sctp_ulpevent  *sctp_ulpevent_make_assoc_change(
 	const struct sctp_association *asoc,
 	__u16 flags, __u16 state, __u16 error, __u16 outbound,
-	__u16 inbound, int gfp)
+	__u16 inbound, unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sctp_assoc_change *sac;
@@ -237,7 +237,7 @@ fail:
 struct sctp_ulpevent *sctp_ulpevent_make_peer_addr_change(
 	const struct sctp_association *asoc,
 	const struct sockaddr_storage *aaddr,
-	int flags, int state, int error, int gfp)
+	int flags, int state, int error, unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sctp_paddr_change  *spc;
@@ -350,7 +350,7 @@ fail:
  */
 struct sctp_ulpevent *sctp_ulpevent_make_remote_error(
 	const struct sctp_association *asoc, struct sctp_chunk *chunk,
-	__u16 flags, int gfp)
+	__u16 flags, unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sctp_remote_error *sre;
@@ -448,7 +448,7 @@ fail:
  */
 struct sctp_ulpevent *sctp_ulpevent_make_send_failed(
 	const struct sctp_association *asoc, struct sctp_chunk *chunk,
-	__u16 flags, __u32 error, int gfp)
+	__u16 flags, __u32 error, unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sctp_send_failed *ssf;
@@ -557,7 +557,7 @@ fail:
  */
 struct sctp_ulpevent *sctp_ulpevent_make_shutdown_event(
 	const struct sctp_association *asoc,
-	__u16 flags, int gfp)
+	__u16 flags, unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sctp_shutdown_event *sse;
@@ -620,7 +620,7 @@ fail:
  * 5.3.1.6 SCTP_ADAPTION_INDICATION
  */
 struct sctp_ulpevent *sctp_ulpevent_make_adaption_indication(
-	const struct sctp_association *asoc, int gfp)
+	const struct sctp_association *asoc, unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sctp_adaption_event *sai;
@@ -657,7 +657,7 @@ fail:
  */
 struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc,
 						struct sctp_chunk *chunk,
-						int gfp)
+						unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event = NULL;
 	struct sk_buff *skb;
@@ -718,7 +718,8 @@ fail:
  *   various events.
  */
 struct sctp_ulpevent *sctp_ulpevent_make_pdapi(
-	const struct sctp_association *asoc, __u32 indication, int gfp)
+	const struct sctp_association *asoc, __u32 indication,
+	unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sctp_pdapi_event *pd;
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index d5dd2cf7ac4a..8bbc279d6c99 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -100,7 +100,7 @@ void sctp_ulpq_free(struct sctp_ulpq *ulpq)
 
 /* Process an incoming DATA chunk.  */
 int sctp_ulpq_tail_data(struct sctp_ulpq *ulpq, struct sctp_chunk *chunk,
-			int gfp)
+			unsigned int __nocast gfp)
 {
 	struct sk_buff_head temp;
 	sctp_data_chunk_t *hdr;
@@ -778,7 +778,8 @@ static __u16 sctp_ulpq_renege_frags(struct sctp_ulpq *ulpq, __u16 needed)
 
 /* Partial deliver the first message as there is pressure on rwnd. */
 void sctp_ulpq_partial_delivery(struct sctp_ulpq *ulpq,
-				struct sctp_chunk *chunk, int gfp)
+				struct sctp_chunk *chunk,
+				unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *event;
 	struct sctp_association *asoc;
@@ -802,7 +803,7 @@ void sctp_ulpq_partial_delivery(struct sctp_ulpq *ulpq,
 
 /* Renege some packets to make room for an incoming chunk.  */
 void sctp_ulpq_renege(struct sctp_ulpq *ulpq, struct sctp_chunk *chunk,
-		      int gfp)
+		      unsigned int __nocast gfp)
 {
 	struct sctp_association *asoc;
 	__u16 needed, freed;
@@ -841,7 +842,7 @@ void sctp_ulpq_renege(struct sctp_ulpq *ulpq, struct sctp_chunk *chunk,
 /* Notify the application if an association is aborted and in
  * partial delivery mode.  Send up any pending received messages.
  */
-void sctp_ulpq_abort_pd(struct sctp_ulpq *ulpq, int gfp)
+void sctp_ulpq_abort_pd(struct sctp_ulpq *ulpq, unsigned int __nocast gfp)
 {
 	struct sctp_ulpevent *ev = NULL;
 	struct sock *sk;
diff --git a/net/unix/Kconfig b/net/unix/Kconfig
new file mode 100644
index 000000000000..5a69733bcdad
--- /dev/null
+++ b/net/unix/Kconfig
@@ -0,0 +1,21 @@
+#
+# Unix Domain Sockets
+#
+
+config UNIX
+	tristate "Unix domain sockets"
+	---help---
+	  If you say Y here, you will include support for Unix domain sockets;
+	  sockets are the standard Unix mechanism for establishing and
+	  accessing network connections.  Many commonly used programs such as
+	  the X Window system and syslog use these sockets even if your
+	  machine is not connected to any network.  Unless you are working on
+	  an embedded system or something similar, you therefore definitely
+	  want to say Y here.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called unix.  Note that several important services won't work
+	  correctly if you say M here and then neglect to load the module.
+
+	  Say Y unless you know what you are doing.
+
diff --git a/net/wanrouter/Kconfig b/net/wanrouter/Kconfig
new file mode 100644
index 000000000000..1debe1cb054e
--- /dev/null
+++ b/net/wanrouter/Kconfig
@@ -0,0 +1,29 @@
+#
+# Configuration for WAN router
+#
+
+config WAN_ROUTER
+	tristate "WAN router"
+	depends on EXPERIMENTAL
+	---help---
+	  Wide Area Networks (WANs), such as X.25, frame relay and leased
+	  lines, are used to interconnect Local Area Networks (LANs) over vast
+	  distances with data transfer rates significantly higher than those
+	  achievable with commonly used asynchronous modem connections.
+	  Usually, a quite expensive external device called a `WAN router' is
+	  needed to connect to a WAN.
+
+	  As an alternative, WAN routing can be built into the Linux kernel.
+	  With relatively inexpensive WAN interface cards available on the
+	  market, a perfectly usable router can be built for less than half
+	  the price of an external router.  If you have one of those cards and
+	  wish to use your Linux box as a WAN router, say Y here and also to
+	  the WAN driver for your card, below.  You will then need the
+	  wan-tools package which is available from <ftp://ftp.sangoma.com/>.
+	  Read <file:Documentation/networking/wan-router.txt> for more
+	  information.
+
+	  To compile WAN routing support as a module, choose M here: the
+	  module will be called wanrouter.
+
+	  If unsure, say N.
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
index d6844ac226f5..13b650ad22e2 100644
--- a/net/wanrouter/wanmain.c
+++ b/net/wanrouter/wanmain.c
@@ -358,10 +358,10 @@ int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev,
  */
 
 
-unsigned short wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev)
+__be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	int cnt = skb->data[0] ? 0 : 1;	/* there may be a pad present */
-	unsigned short ethertype;
+	__be16 ethertype;
 
 	switch (skb->data[cnt]) {
 	case NLPID_IP:		/* IP datagramm */
@@ -379,7 +379,7 @@ unsigned short wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev)
 				skb->data[cnt+3], dev->name);
 			return 0;
 		}
-		ethertype = *((unsigned short*)&skb->data[cnt+4]);
+		ethertype = *((__be16*)&skb->data[cnt+4]);
 		cnt += 6;
 		break;
 
diff --git a/net/x25/Kconfig b/net/x25/Kconfig
new file mode 100644
index 000000000000..e6759c9660bb
--- /dev/null
+++ b/net/x25/Kconfig
@@ -0,0 +1,36 @@
+#
+# CCITT X.25 Packet Layer
+#
+
+config X25
+	tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  X.25 is a set of standardized network protocols, similar in scope to
+	  frame relay; the one physical line from your box to the X.25 network
+	  entry point can carry several logical point-to-point connections
+	  (called "virtual circuits") to other computers connected to the X.25
+	  network. Governments, banks, and other organizations tend to use it
+	  to connect to each other or to form Wide Area Networks (WANs). Many
+	  countries have public X.25 networks. X.25 consists of two
+	  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
+	  if you want that) and the lower level data link layer protocol LAPB
+	  (say Y to "LAPB Data Link Driver" below if you want that).
+
+	  You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
+	  <http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
+	  Information about X.25 for Linux is contained in the files
+	  <file:Documentation/networking/x25.txt> and
+	  <file:Documentation/networking/x25-iface.txt>.
+
+	  One connects to an X.25 network either with a dedicated network card
+	  using the X.21 protocol (not yet supported by Linux) or one can do
+	  X.25 over a standard telephone line using an ordinary modem (say Y
+	  to "X.25 async driver" below) or over Ethernet using an ordinary
+	  Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
+	  Driver" and "LAPB over Ethernet driver" below).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called x25. If unsure, say N.
+
+
diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig
index 58ca6a972c48..0c1c04322baf 100644
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
@@ -1,6 +1,10 @@
 #
 # XFRM configuration
 #
+config XFRM
+       bool
+       depends on NET
+
 config XFRM_USER
 	tristate "IPsec user configuration interface"
 	depends on INET && XFRM
@@ -10,3 +14,14 @@ config XFRM_USER
 
 	  If unsure, say Y.
 
+config NET_KEY
+	tristate "PF_KEY sockets"
+	select XFRM
+	---help---
+	  PF_KEYv2 socket family, compatible to KAME ones.
+	  They are required if you are going to use IPsec tools ported
+	  from KAME.
+
+	  Say Y unless you know what you are doing.
+
+