linux/drivers, branch v5.8-rc3

Merge tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-28T21:57:14Z

Pull ARM OMAP fixes from Arnd Bergmann: "The OMAP developers are particularly active at hunting down regressions, so this is a separate branch with OMAP specific fixes for v5.8: As Tony explains "The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though": - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Other OMAP changes from Tony include: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode - One patch to convert am3/am4 DT files to use the regular sdhci-omap driver instead of the old hsmmc driver, this was meant for the merge window but got lost in the process" * tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one ...

Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-28T21:55:18Z

Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bug fixes, mostly for devicetree files NXP i.MX: - Use correct voltage on some i.MX8M board device trees to avoid hardware damage - Code fixes for a compiler warning and incorrect reference counting, both harmless. - Fix the i.MX8M SoC driver to correctly identify imx8mp - Fix watchdog configuration in imx6ul-kontron device tree. Broadcom: - A small regression fix for the Raspberry-Pi firmware driver - A Kconfig change to use the correct timer driver on Northstar - A DT fix for the Luxul XWC-2000 machine - Two more DT fixes for NSP SoCs STmicroelectronics STI - Revert one broken patch for L2 cache configuration ARM Versatile Express: - Fix a regression by reverting a broken DT cleanup TEE drivers: - MAINTAINERS: change tee mailing list" * tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "ARM: sti: Implement dummy L2 cache's write_sec" soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range ARM: dts: NSP: Correct FA2 mailbox node ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() MAINTAINERS: change tee mailing list ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 arm: dts: vexpress: Move mcc node back into motherboard node

Merge tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-06-28T18:42:16Z

Pull EFI fixes from Ingo Molnar: - Fix build regression on v4.8 and older - Robustness fix for TPM log parsing code - kobject refcount fix for the ESRT parsing code - Two efivarfs fixes to make it behave more like an ordinary file system - Style fixup for zero length arrays - Fix a regression in path separator handling in the initrd loader - Fix a missing prototype warning - Add some kerneldoc headers for newly introduced stub routines - Allow support for SSDT overrides via EFI variables to be disabled - Report CPU mode and MMU state upon entry for 32-bit ARM - Use the correct stack pointer alignment when entering from mixed mode * tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub: arm: Print CPU boot mode and MMU state at boot efi/libstub: arm: Omit arch specific config table matching array on arm64 efi/x86: Setup stack correctly for efi_pe_entry efi: Make it possible to disable efivar_ssdt entirely efi/libstub: Descriptions for stub helper functions efi/libstub: Fix path separator regression efi/libstub: Fix missing-prototype warning for skip_spaces() efi: Replace zero-length array and use struct_size() helper efivarfs: Don't return -EINTR when rate-limiting reads efivarfs: Update inode modification time for successful writes efi/esrt: Fix reference count leak in esre_create_sysfs_entry. efi/tpm: Verify event log header before parsing efi/x86: Fix build with gcc 4

Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2020-06-28T12:48:19Z

i.MX fixes for 5.8: - Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device trees. - Fix i.MX8MP UID fuse offset in i.MX8M SoC driver. - Fix watchdog configuration in imx6ul-kontron device tree. - Fix one build warning seen on building soc-imx8m driver with x86_64-randconfig. - Add missing put_device() call for a couple of mach-imx PM functions. * tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon Signed-off-by: Arnd Bergmann

Merge tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux into arm/fixes

2020-06-28T12:48:06Z

This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers fixes for 5.8, please pull the following: - Andy provides a fix for the Raspberry Pi firmware driver to print the correct time upon boot. This is a fallout from a converstion to use the ptT format * tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() Link: https://lore.kernel.org/r/20200619202250.19029-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann

Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

2020-06-28T12:41:55Z

Fixes for omaps for v5.8 The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though: - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Then there is a pile of other fixes not related to the DSS: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 * tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com Signed-off-by: Arnd Bergmann

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-06-27T22:20:03Z

Pull SCSI fixes from James Bottomley: "Six small fixes, five in drivers and one to correct another minor regression from cc97923a5bcc ("block: move dma drain handling to scsi") where we still need the drain stub to be built in to the kernel for the modular libata, non-modular SAS driver case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptscsih: Fix read sense data size scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() scsi: libata: Fix the ata_scsi_dma_need_drain stub scsi: qla2xxx: Keep initiator ports after RSCN scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request

Merge tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio

2020-06-27T22:17:21Z

Pull VFIO fixes from Alex Williamson: - Fix double free of eventfd ctx (Alex Williamson) - Fix duplicate use of capability ID (Alex Williamson) - Fix SR-IOV VF memory enable handling (Alex Williamson) * tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio: vfio/pci: Fix SR-IOV VF handling with MMIO blocking vfio/type1: Fix migration info capability ID vfio/pci: Clear error and request eventfd ctx after releasing

Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2020-06-27T22:15:37Z

Pull i2c fixes from Wolfram Sang: "This contains a 5.8 regression fix for the Designware driver, a register bitfield fix for the fsi driver, and a missing sanity check for the I2C core" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: check returned size of emulated smbus block read i2c: fsi: Fix the port number field in status register i2c: designware: Adjust bus speed independently of ACPI

Merge tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2020-06-27T20:14:15Z

Pull staging driver fixes from Greg KH: "Here are a small number of tiny staging driver fixes for 5.8-rc3. Not much here, but there were some reported problems to be fixed: - three wfx driver fixes - rtl8723bs driver fix All of these have been in linux-next with no reported issues" * tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate() staging: wfx: fix coherency of hif_scan() prototype staging: wfx: drop useless loop staging: wfx: fix AC priority