linux/drivers/vfio/pci/vfio_pci_config.c, branch v5.2-rc1

vfio: Use dev_printk() when possible

2019-04-22T17:45:42Z

Use dev_printk() when possible to make messages consistent with other device-related messages. Signed-off-by: Bjorn Helgaas Acked-by: Eric Auger Reviewed-by: Eric Auger Signed-off-by: Alex Williamson

vfio/pci: Restore device state on PM transition

2019-02-18T21:55:53Z

PCI core handles save and restore of device state around reset, but when using pci_set_power_state() we can unintentionally trigger a soft reset of the device, where PCI core only restores the BAR state. If we're using vfio-pci's idle D3 support to try to put devices into low power when unused, this might trigger a reset when the device is woken for use. Also power state management by the user, or within a guest, can put the device into D3 power state with potentially limited ability to restore the device if it should undergo a reset. The PCI spec does not define the extent of a soft reset and many devices reporting soft reset on D3->D0 transition do not undergo a PCI config space reset. It's therefore assumed safe to unconditionally restore the remainder of the state if the device indicates soft reset support, even on a user initiated wakeup. Implement a wrapper in vfio-pci to tag devices reporting PM reset support, save their state on transitions into D3 and restore on transitions back to D0. Reported-by: Alexander Duyck Signed-off-by: Alex Williamson

vfio/pci: Mask buggy SR-IOV VF INTx support

2018-09-25T19:01:27Z

The SR-IOV spec requires that VFs must report zero for the INTx pin register as VFs are precluded from INTx support. It's much easier for the host kernel to understand whether a device is a VF and therefore whether a non-zero pin register value is bogus than it is to do the same in userspace. Override the INTx count for such devices and virtualize the pin register to provide a consistent view of the device to the user. As this is clearly a spec violation, warn about it to support hardware validation, but also provide a known whitelist as it doesn't do much good to continue complaining if the hardware vendor doesn't plan to fix it. Known devices with this issue: 8086:270c Tested-by: Gage Eads Reviewed-by: Ashok Raj Signed-off-by: Alex Williamson

vfio/pci: Fix potential memory leak in vfio_msi_cap_len

2018-09-25T19:01:27Z

Free allocated vdev->msi_perm in error path. Signed-off-by: Li Qiang Reviewed-by: Eric Auger Signed-off-by: Alex Williamson

vfio/pci: Virtualize Maximum Read Request Size

2017-10-02T18:39:10Z

MRRS defines the maximum read request size a device is allowed to make. Drivers will often increase this to allow more data transfer with a single request. Completions to this request are bound by the MPS setting for the bus. Aside from device quirks (none known), it doesn't seem to make sense to set an MRRS value less than MPS, yet this is a likely scenario given that user drivers do not have a system-wide view of the PCI topology. Virtualize MRRS such that the user can set MRRS >= MPS, but use MPS as the floor value that we'll write to hardware. Signed-off-by: Alex Williamson

vfio/pci: Virtualize Maximum Payload Size

2017-10-02T18:39:09Z

With virtual PCI-Express chipsets, we now see userspace/guest drivers trying to match the physical MPS setting to a virtual downstream port. Of course a lone physical device surrounded by virtual interconnects cannot make a correct decision for a proper MPS setting. Instead, let's virtualize the MPS control register so that writes through to hardware are disallowed. Userspace drivers like QEMU assume they can write anything to the device and we'll filter out anything dangerous. Since mismatched MPS can lead to AER and other faults, let's add it to the kernel side rather than relying on userspace virtualization to handle it. Signed-off-by: Alex Williamson Reviewed-by: Eric Auger

vfio/pci: Fix handling of RC integrated endpoint PCIe capability size

2017-07-27T16:39:33Z

Root complex integrated endpoints do not have a link and therefore may use a smaller PCIe capability in config space than we expect when building our config map. Add a case for these to avoid reporting an erroneous overlap. Signed-off-by: Alex Williamson

Merge tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2016-12-15T20:46:48Z

Pull PCI updates from Bjorn Helgaas: "PCI changes: - add support for PCI on ARM64 boxes with ACPI. We already had this for theoretical spec-compliant hardware; now we're adding quirks for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene) - add runtime PM support for hotplug ports - enable runtime suspend for Intel UHCI that uses platform-specific wakeup signaling - add yet another host bridge registration interface. We hope this is extensible enough to subsume the others - expose device revision in sysfs for DRM - to avoid device conflicts, make sure any VF BAR updates are done before enabling the VF - avoid unnecessary link retrains for ASPM - allow INTx masking on Mellanox devices that support it - allow access to non-standard VPD for Chelsio devices - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA, etc - update Rockchip support for max-link-speed - add NVIDIA Tegra210 support - add Layerscape LS1046a support - update R-Car compatibility strings - add Qualcomm MSM8996 support - remove some uninformative bootup messages" * tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits) PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h x86/platform/intel-mid: Constify mid_pci_platform_pm PCI/ASPM: Don't retrain link if ASPM not possible PCI: iproc: Skip check for legacy IRQ on PAXC buses PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar PCI: rcar: Use gen2 fallback compatibility last PCI: rcar-gen2: Use gen2 fallback compatibility last PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() ..

PCI: Move config space size macros to pci_regs.h

2016-12-12T16:05:22Z

Move PCI configuration space size macros (PCI_CFG_SPACE_SIZE and PCI_CFG_SPACE_EXP_SIZE) from drivers/pci/pci.h to include/uapi/linux/pci_regs.h so they can be used by more drivers and eliminate duplicate definitions. [bhelgaas: Expand comment to include PCI-X details] Signed-off-by: Wang Sheng-Hui Signed-off-by: Bjorn Helgaas

vfio/pci: Drop unnecessary pcibios_err_to_errno()

2016-11-18T18:06:42Z

As of commit d97ffe236894 ("PCI: Fix return value from pci_user_{read,write}_config_*()") it's unnecessary to call pcibios_err_to_errno() to fixup the return value from these functions. pcibios_err_to_errno() already does simple passthrough of -errno values, therefore no functional change is expected. [aw: changelog] Signed-off-by: Cao jin Signed-off-by: Alex Williamson