linux/drivers/usb/host/ehci-platform.c, branch v4.0

usb: ehci-platform: add support for multiple phys per controller

2015-01-25T13:05:10Z

Added support for cases where one controller is connected to multiple phys. Signed-off-by: Arun Ramamurthy Reviewed-by: Ray Jui Reviewed-by: Scott Branden Tested-by: Scott Branden Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform

2015-01-25T12:48:28Z

ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon and usage of ehci-platform ehci dma_mask is now limited to 32 bits (coerced in ehci_platform_probe). Provide a flag in ehci platform data to allow use of 64 bits for dma_mask. Cc: David Daney Cc: Alex Smith Signed-off-by: Andreas Herrmann Tested-by: Aaro Koskinen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: host: Remove hard-coded octeon platform information for ehci/ohci

2015-01-09T20:29:57Z

Instead rely on device tree information for ehci and ohci. This was suggested with http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1401358203-60225-4-git-send-email-alex.smith%40imgtec.com "The device tree will *always* have correct ehci/ohci clock configuration, so use it. This allows us to remove a big chunk of platform configuration code from octeon-platform.c." More or less I rebased that patch on Alan's work to remove ehci-octeon and ohci-octeon drivers. Cc: David Daney Cc: Alex Smith Cc: Alan Stern Signed-off-by: Andreas Herrmann Acked-by: Ralf Baechle Tested-by: Aaro Koskinen Signed-off-by: Greg Kroah-Hartman

USB: ehci-platform: Support ehci reset after resume quirk

2015-01-09T20:25:54Z

The Rockchip rk3288 EHCI controller doesn't properly detect the case when a device is removed during suspend. Specifically, when usb resume from suspend, the EHCI controller maintaining the USB state (FLAG_CF is 1, Current Connect Status is 1), but a USB device (like a USB camera on rk3288) may have been disconnected actually. Let's add a quirk to force ehci to go into the usb_root_hub_lost_power() path and reset after resume. This should generally reset the whole controller and all ports and initialize everything cleanly again, and bring the devices back up. As part of this, rename the "hibernation" paramter of ehci_resume() to force_reset since hibernation is simply another case where we can't trust the autodetected status and need to force a reset of devices. Signed-off-by: Wu Liang feng Reviewed-by: Julius Werner Reviewed-by: Doug Anderson Reviewed-by: Tomasz Figa Reviewed-by: Pawel Osciak Reviewed-by: Sonny Rao Acked-by: Alan Stern Tested-by: Doug Anderson Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09Z

Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev__once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...

host: ehci-platform: remove duplicate check on resource

2014-11-07T17:01:51Z

Sanity check on resource happening with devm_ioremap_resource(). Signed-off-by: Varka Bhadram Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: ehci/ohci-platform: use SIMPLE_DEV_PM_OPS to support hibernation

2014-11-03T23:38:17Z

ehci/ohci-platform just define .suspend/.resume functions for dev_pm_ops, but in order to support both STR(suspend-to-ram) and hibernation, other callbacks such as .freeze/.thaw are also required. Registering all required callbacks for both STR and hibernation can be done by SIMPLE_DEV_PM_OPS macro function. Signed-off-by: Wonhong Kwon Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: host: drop owner assignment from platform_drivers

2014-10-20T14:21:49Z

A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang

usb: ehci-platform: add optional reset controller retrieval

2014-05-27T22:53:01Z

On the Allwinner's A31 SoC the reset line connected to the EHCI IP has to be deasserted for the EHCI block to be usable. Add support for an optional reset controller that will be deasserted on power off and asserted on power on. Signed-off-by: Boris BREZILLON Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: ehci-platform: Return immediately from suspend if ehci_suspend fails

2014-04-16T20:59:13Z

Patch 'b8efdaf USB: EHCI: add check for wakeup/suspend race' adds a check for possible race between suspend and wakeup interrupt, and thereby it returns -EBUSY as error code if there's a wakeup interrupt. So the platform host controller should not proceed further with its suspend callback, rather should return immediately to avoid powering down the essential things, like phy. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Cc: Hauke Mehrtens Cc: Hans de Goede Signed-off-by: Greg Kroah-Hartman