linux/drivers/scsi/iscsi_tcp.c, branch v2.6.39-rc2

[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function

2011-02-24T17:41:10Z

This has iscsi_tcp use the iscsi_conn_get_addr_param libiscsi function. It also drops the use of the libiscsi session portal buffers, so they can be removed in the next patches. Instead of copying the values at bind time we get them during get() time. If we are not connected userspace will now get -ENOTCONN, so it knows that connection is disconnected instead of a possible stale value. Signed-off-by: Mike Christie Signed-off-by: James Bottomley

[SCSI] iscsi_tcp: remove sk_sleep check

2010-05-25T15:04:10Z

There is no need to call sk_sleep before calling wake_up_interruptible, because the wait_queue_head is now with the socket. Signed-off-by: Mike Christie Signed-off-by: James Bottomley

Fix networking tree iscsi_tcp.c mis-merge

2010-05-21T16:48:36Z

The removal of the 'waitqueue_active()' test in commit d7d05548a6 ("[SCSI] iscsi_tcp: fix relogin/shutdown hang") got incorrectly resolved by David when he back-merged the main git tree into the networking tree in commit 278554bd65 ("Merge branch 'master' of master.kernel.org:..."). There was a content conflict due to 'sock->sk->sk_sleep' being changed into 'sk_sleep(sock->sk)' in the networking tree, but David didn't pick up the iscsi change from the main tree. Reported-by: James Bottomley Cc: David Miller Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2010-05-21T14:19:18Z

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits) [SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline [SCSI] aacraid: prohibit access to array container space [SCSI] aacraid: add support for handling ATA pass-through commands. [SCSI] aacraid: expose physical devices for models with newer firmware [SCSI] aacraid: respond automatically to volumes added by config tool [SCSI] fcoe: fix fcoe module ref counting [SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn [SCSI] libfcoe: Fix incorrect MAC address clearing [SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex [SCSI] libfc: Move the port_id into lport [SCSI] fcoe: move link speed checking into its own routine [SCSI] libfc: Remove extra pointer check [SCSI] libfc: Remove unused fc_get_host_port_type [SCSI] fcoe: fixes wrong error exit in fcoe_create [SCSI] libfc: set seq_id for incoming sequence [SCSI] qla2xxx: Updates to ISP82xx support. [SCSI] qla2xxx: Optionally disable target reset. [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive [SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did. [SCSI] qla2xxx: T10 DIF support added. ...

[SCSI] Merge scsi-misc-2.6 into scsi-rc-fixes-2.6

2010-05-18T14:37:41Z

Signed-off-by: James Bottomley

net: sk_sleep() helper

2010-04-20T23:37:13Z

Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

[SCSI] iscsi_tcp: Change iscsi_sw_tcp_conn_restore_callbacks arguments

2010-04-11T19:04:04Z

This patch changes the arguments to iscsi_sw_tcp_conn_restore_callbacks, so that it works like the function to set the callbacks and because in upcoming patches we need a iscsi_conn. Signed-off-by: Avi Kaplan Signed-off-by: Mike Christie Signed-off-by: James Bottomley

[SCSI] iscsi_tcp: fix relogin/shutdown hang

2010-04-11T18:28:13Z

When I made this patch: b64e77f70b8c11766e967e3485331a9e6ef01390 it was to solve a problem where we were already on the waitqueue becuase a connection problem/logout caused us to be on there when we were cleaning up the session. If we happen to get on queue for more normal reasons like their just does not happen to be any send space at the same time we are closing the connection we hit a race and get stuck in the wait. We should not check if the waitqueue is active because we could race with the network code. If the network xmit code is just about to enter the prepare to wait when we check for the waitqueue to be active then we will miss each other and the network code will fall into the wait and we will not run wake_up. Signed-off-by: Mike Christie Signed-off-by: James Bottomley

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

[SCSI] libiscsi: Make iscsi_eh_target_reset start with session reset

2010-03-03T12:09:04Z

The iscsi_eh_target_reset has been modified to attempt target reset only. If it fails, then iscsi_eh_session_reset will be called. Signed-off-by: Mike Christie Signed-off-by: Jayamohan Kallickal Signed-off-by: James Bottomley