linux/drivers/media/platform/ti-vpe/vpdma_priv.h, branch master

media: platform: re-structure TI drivers

2022-03-18T04:58:35Z

The ti-vpe/ sub-directory does not only contain the VPE-specific things. It also contains the CAL driver, which is a completely different subsystem. This is also not a good place to add new drivers for other TI platforms since they will all get mixed up. Separate the VPE and CAL parts into different sub-directories and rename the ti-vpe/ sub-directory to ti/. This is now the place where new TI platform drivers can be added. [mchehab: rebased to apple on the top of media/platform/Kconfig series] Signed-off-by: Pratyush Yadav Reviewed-by: Tomi Valkeinen Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab

media: ti-vpe: vpdma: Use fixed type for address in descriptor

2019-10-10T16:50:36Z

Using dma_addr_t as the type to hold address inside of a fix sized descriptor used by the vpdma firmware is prone to fail when the expected width is 32 bits and suddenly when CONFIG_LPAE is enabled the data size is now 64 bits shifted the remaining members of the descriptor in memory which confuses the firmware. Signed-off-by: Benoit Parrot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: ti-vpe: Add support for NV21 format

2019-10-10T16:46:46Z

In NV21 format, the chroma plane is written to memory such that the U and V components are swapped for NV12. Create a new entry in the VPDMA formats to describe the correct data types used in the data descriptors. Update all checks for NV12 and add NV21 there as well. Add support for V4L2_PIX_FMT_NV21 format for both capture and output streams. Signed-off-by: Nikhil Devshatwar Signed-off-by: Benoit Parrot Reviewed-by: Tomi Valkeinen Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

[media] media: ti-vpe: vpdma: RGB data type yield inverted data

2016-11-22T10:05:59Z

The VPDMA RGB data type definition have been updated to match with Errata i839. But some of the ARGB definition appeared to be wrong in the document also. As they would yield RGBA instead. They have been corrected based on experimentation. Signed-off-by: Benoit Parrot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] media: ti-vpe: vpdma: Corrected YUV422 data type label

2016-11-22T10:05:26Z

The YUV data type definition below are taken from both the TRM and i839 Errata information. Use the correct data type considering byte reordering of components. Added the 2 missing YUV422 variant. Also since the single use of "C" in the 422 case to mean "Cr" (i.e. V component). It was decided to explicitly label them CR to remove any confusion. Bear in mind that the type label refer to the memory packed order (LSB - MSB). Signed-off-by: Benoit Parrot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] media: ti-vpe: vpdma: Add support for setting max width height

2016-11-22T09:10:49Z

Add a helper function to be able to set the maximum VPDMA transfer size to limit potential buffer overrun. Added enums for max_width and max_height fields of the outbound data descriptor. Changed vpdma_add_out_dtd to accept two more arguments for max width and height. Make use of different max width & height sets for different of capture module (i.e. slices). Signed-off-by: Nikhil Devshatwar Signed-off-by: Benoit Parrot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] media: ti-vpe: vpdma: Fix bus error when vpdma is writing a descriptor

2016-11-22T08:27:30Z

On DRA7 since l3_noc event are being reported it was found that when the write descriptor was being written it was consistently causing bus error events. The write address was improperly programmed. Signed-off-by: Benoit Parrot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] media: ti-vpe: vpdma: Add multi-instance and multi-client support

2016-11-22T08:25:51Z

The VPDMA (Video Port DMA) as found in devices such as DRA7xx is used for both the Video Processing Engine (VPE) and the Video Input Port (VIP). Some devices may have multiple VIP instances each with its own VPDMA engine. Within VIP two slices can use a single VPDMA engine simultaneously. So support for multi instances and multiple clients has been added to VPDMA. Needed modification to the existing helper functions were then reflected to VPE. Multi-clients registers offset have also been added in preparation. Signed-off-by: Benoit Parrot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] v4l: ti-vpe: Fix the data_type value for UYVY VPDMA format

2013-12-10T18:49:02Z

The data_type value to be programmed in the data descriptors to fetch/write a UYVY buffer was not mentioned correctly in the older DRA7x documentation. This caused VPE to fail with UYVY color formats. Update the data_type value to fix functionality when UYVY format is used. Signed-off-by: Archit Taneja Signed-off-by: Mauro Carvalho Chehab